1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Common boot and setup code for both 32-bit and 64-bit. 4 * Extracted from arch/powerpc/kernel/setup_64.c. 5 * 6 * Copyright (C) 2001 PPC64 Team, IBM Corp 7 */ 8 9 #undef DEBUG 10 11 #include <linux/export.h> 12 #include <linux/panic_notifier.h> 13 #include <linux/string.h> 14 #include <linux/sched.h> 15 #include <linux/init.h> 16 #include <linux/kernel.h> 17 #include <linux/reboot.h> 18 #include <linux/delay.h> 19 #include <linux/initrd.h> 20 #include <linux/platform_device.h> 21 #include <linux/printk.h> 22 #include <linux/seq_file.h> 23 #include <linux/ioport.h> 24 #include <linux/console.h> 25 #include <linux/root_dev.h> 26 #include <linux/cpu.h> 27 #include <linux/unistd.h> 28 #include <linux/seq_buf.h> 29 #include <linux/serial.h> 30 #include <linux/serial_8250.h> 31 #include <linux/percpu.h> 32 #include <linux/memblock.h> 33 #include <linux/of.h> 34 #include <linux/of_fdt.h> 35 #include <linux/of_irq.h> 36 #include <linux/hugetlb.h> 37 #include <linux/pgtable.h> 38 #include <asm/io.h> 39 #include <asm/paca.h> 40 #include <asm/processor.h> 41 #include <asm/vdso_datapage.h> 42 #include <asm/smp.h> 43 #include <asm/elf.h> 44 #include <asm/machdep.h> 45 #include <asm/time.h> 46 #include <asm/cputable.h> 47 #include <asm/sections.h> 48 #include <asm/firmware.h> 49 #include <asm/btext.h> 50 #include <asm/nvram.h> 51 #include <asm/setup.h> 52 #include <asm/rtas.h> 53 #include <asm/iommu.h> 54 #include <asm/serial.h> 55 #include <asm/cache.h> 56 #include <asm/page.h> 57 #include <asm/mmu.h> 58 #include <asm/xmon.h> 59 #include <asm/cputhreads.h> 60 #include <mm/mmu_decl.h> 61 #include <asm/archrandom.h> 62 #include <asm/fadump.h> 63 #include <asm/udbg.h> 64 #include <asm/hugetlb.h> 65 #include <asm/livepatch.h> 66 #include <asm/mmu_context.h> 67 #include <asm/cpu_has_feature.h> 68 #include <asm/kasan.h> 69 #include <asm/mce.h> 70 #include <asm/systemcfg.h> 71 #include <linux/kmsg_dump.h> 72 73 #include "setup.h" 74 75 #ifdef DEBUG 76 #define DBG(fmt...) udbg_printf(fmt) 77 #else 78 #define DBG(fmt...) 79 #endif 80 81 /* The main machine-dep calls structure 82 */ 83 struct machdep_calls ppc_md; 84 EXPORT_SYMBOL(ppc_md); 85 struct machdep_calls *machine_id; 86 EXPORT_SYMBOL(machine_id); 87 88 int boot_cpuid = -1; 89 EXPORT_SYMBOL_GPL(boot_cpuid); 90 int __initdata boot_core_hwid = -1; 91 92 #ifdef CONFIG_PPC64 93 int boot_cpu_hwid = -1; 94 #endif 95 96 /* 97 * These are used in binfmt_elf.c to put aux entries on the stack 98 * for each elf executable being started. 99 */ 100 int dcache_bsize; 101 int icache_bsize; 102 103 /* Variables required to store legacy IO irq routing */ 104 int of_i8042_kbd_irq; 105 EXPORT_SYMBOL_GPL(of_i8042_kbd_irq); 106 int of_i8042_aux_irq; 107 EXPORT_SYMBOL_GPL(of_i8042_aux_irq); 108 109 #ifdef __DO_IRQ_CANON 110 /* XXX should go elsewhere eventually */ 111 int ppc_do_canonicalize_irqs; 112 EXPORT_SYMBOL(ppc_do_canonicalize_irqs); 113 #endif 114 115 #ifdef CONFIG_CRASH_DUMP 116 /* This keeps a track of which one is the crashing cpu. */ 117 int crashing_cpu = -1; 118 #endif 119 120 /* also used by kexec */ 121 void machine_shutdown(void) 122 { 123 /* 124 * if fadump is active, cleanup the fadump registration before we 125 * shutdown. 126 */ 127 fadump_cleanup(); 128 129 if (ppc_md.machine_shutdown) 130 ppc_md.machine_shutdown(); 131 } 132 133 static void machine_hang(void) 134 { 135 pr_emerg("System Halted, OK to turn off power\n"); 136 local_irq_disable(); 137 while (1) 138 ; 139 } 140 141 void machine_restart(char *cmd) 142 { 143 machine_shutdown(); 144 if (ppc_md.restart) 145 ppc_md.restart(cmd); 146 147 smp_send_stop(); 148 149 do_kernel_restart(cmd); 150 mdelay(1000); 151 152 machine_hang(); 153 } 154 155 void machine_power_off(void) 156 { 157 machine_shutdown(); 158 do_kernel_power_off(); 159 smp_send_stop(); 160 machine_hang(); 161 } 162 /* Used by the G5 thermal driver */ 163 EXPORT_SYMBOL_GPL(machine_power_off); 164 165 void (*pm_power_off)(void); 166 EXPORT_SYMBOL_GPL(pm_power_off); 167 168 size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs) 169 { 170 if (max_longs && ppc_md.get_random_seed && ppc_md.get_random_seed(v)) 171 return 1; 172 return 0; 173 } 174 EXPORT_SYMBOL(arch_get_random_seed_longs); 175 176 void machine_halt(void) 177 { 178 machine_shutdown(); 179 if (ppc_md.halt) 180 ppc_md.halt(); 181 182 smp_send_stop(); 183 machine_hang(); 184 } 185 186 #ifdef CONFIG_SMP 187 DEFINE_PER_CPU(unsigned int, cpu_pvr); 188 #endif 189 190 static void show_cpuinfo_summary(struct seq_file *m) 191 { 192 struct device_node *root; 193 const char *model = NULL; 194 unsigned long bogosum = 0; 195 int i; 196 197 if (IS_ENABLED(CONFIG_SMP) && IS_ENABLED(CONFIG_PPC32)) { 198 for_each_online_cpu(i) 199 bogosum += loops_per_jiffy; 200 seq_printf(m, "total bogomips\t: %lu.%02lu\n", 201 bogosum / (500000 / HZ), bogosum / (5000 / HZ) % 100); 202 } 203 seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); 204 if (ppc_md.name) 205 seq_printf(m, "platform\t: %s\n", ppc_md.name); 206 root = of_find_node_by_path("/"); 207 if (root) 208 model = of_get_property(root, "model", NULL); 209 if (model) 210 seq_printf(m, "model\t\t: %s\n", model); 211 of_node_put(root); 212 213 if (ppc_md.show_cpuinfo != NULL) 214 ppc_md.show_cpuinfo(m); 215 216 /* Display the amount of memory */ 217 if (IS_ENABLED(CONFIG_PPC32)) 218 seq_printf(m, "Memory\t\t: %d MB\n", 219 (unsigned int)(total_memory / (1024 * 1024))); 220 } 221 222 static int show_cpuinfo(struct seq_file *m, void *v) 223 { 224 unsigned long cpu_id = (unsigned long)v - 1; 225 unsigned int pvr; 226 unsigned long proc_freq; 227 unsigned short maj; 228 unsigned short min; 229 230 #ifdef CONFIG_SMP 231 pvr = per_cpu(cpu_pvr, cpu_id); 232 #else 233 pvr = mfspr(SPRN_PVR); 234 #endif 235 maj = (pvr >> 8) & 0xFF; 236 min = pvr & 0xFF; 237 238 seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id); 239 240 if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name) 241 seq_puts(m, cur_cpu_spec->cpu_name); 242 else 243 seq_printf(m, "unknown (%08x)", pvr); 244 245 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 246 seq_puts(m, ", altivec supported"); 247 248 seq_putc(m, '\n'); 249 250 #ifdef CONFIG_TAU 251 if (cpu_has_feature(CPU_FTR_TAU)) { 252 if (IS_ENABLED(CONFIG_TAU_AVERAGE)) { 253 /* more straightforward, but potentially misleading */ 254 seq_printf(m, "temperature \t: %u C (uncalibrated)\n", 255 cpu_temp(cpu_id)); 256 } else { 257 /* show the actual temp sensor range */ 258 u32 temp; 259 temp = cpu_temp_both(cpu_id); 260 seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n", 261 temp & 0xff, temp >> 16); 262 } 263 } 264 #endif /* CONFIG_TAU */ 265 266 /* 267 * Platforms that have variable clock rates, should implement 268 * the method ppc_md.get_proc_freq() that reports the clock 269 * rate of a given cpu. The rest can use ppc_proc_freq to 270 * report the clock rate that is same across all cpus. 271 */ 272 if (ppc_md.get_proc_freq) 273 proc_freq = ppc_md.get_proc_freq(cpu_id); 274 else 275 proc_freq = ppc_proc_freq; 276 277 if (proc_freq) 278 seq_printf(m, "clock\t\t: %lu.%06luMHz\n", 279 proc_freq / 1000000, proc_freq % 1000000); 280 281 /* If we are a Freescale core do a simple check so 282 * we don't have to keep adding cases in the future */ 283 if (PVR_VER(pvr) & 0x8000) { 284 switch (PVR_VER(pvr)) { 285 case 0x8000: /* 7441/7450/7451, Voyager */ 286 case 0x8001: /* 7445/7455, Apollo 6 */ 287 case 0x8002: /* 7447/7457, Apollo 7 */ 288 case 0x8003: /* 7447A, Apollo 7 PM */ 289 case 0x8004: /* 7448, Apollo 8 */ 290 case 0x800c: /* 7410, Nitro */ 291 maj = ((pvr >> 8) & 0xF); 292 min = PVR_MIN(pvr); 293 break; 294 default: /* e500/book-e */ 295 maj = PVR_MAJ(pvr); 296 min = PVR_MIN(pvr); 297 break; 298 } 299 } else { 300 switch (PVR_VER(pvr)) { 301 case 0x1008: /* 740P/750P ?? */ 302 maj = ((pvr >> 8) & 0xFF) - 1; 303 min = pvr & 0xFF; 304 break; 305 case 0x004e: /* POWER9 bits 12-15 give chip type */ 306 case 0x0080: /* POWER10 bit 12 gives SMT8/4 */ 307 maj = (pvr >> 8) & 0x0F; 308 min = pvr & 0xFF; 309 break; 310 default: 311 maj = (pvr >> 8) & 0xFF; 312 min = pvr & 0xFF; 313 break; 314 } 315 } 316 317 seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n", 318 maj, min, PVR_VER(pvr), PVR_REV(pvr)); 319 320 if (IS_ENABLED(CONFIG_PPC32)) 321 seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ), 322 (loops_per_jiffy / (5000 / HZ)) % 100); 323 324 seq_putc(m, '\n'); 325 326 /* If this is the last cpu, print the summary */ 327 if (cpu_id == cpumask_last(cpu_online_mask)) 328 show_cpuinfo_summary(m); 329 330 return 0; 331 } 332 333 static void *c_start(struct seq_file *m, loff_t *pos) 334 { 335 *pos = cpumask_next(*pos - 1, cpu_online_mask); 336 if ((*pos) < nr_cpu_ids) 337 return (void *)(unsigned long)(*pos + 1); 338 return NULL; 339 } 340 341 static void *c_next(struct seq_file *m, void *v, loff_t *pos) 342 { 343 (*pos)++; 344 return c_start(m, pos); 345 } 346 347 static void c_stop(struct seq_file *m, void *v) 348 { 349 } 350 351 const struct seq_operations cpuinfo_op = { 352 .start = c_start, 353 .next = c_next, 354 .stop = c_stop, 355 .show = show_cpuinfo, 356 }; 357 358 void __init check_for_initrd(void) 359 { 360 #ifdef CONFIG_BLK_DEV_INITRD 361 DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n", 362 initrd_start, initrd_end); 363 364 /* If we were passed an initrd, set the ROOT_DEV properly if the values 365 * look sensible. If not, clear initrd reference. 366 */ 367 if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) && 368 initrd_end > initrd_start) 369 ROOT_DEV = Root_RAM0; 370 else 371 initrd_start = initrd_end = 0; 372 373 if (initrd_start) 374 pr_info("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); 375 376 DBG(" <- check_for_initrd()\n"); 377 #endif /* CONFIG_BLK_DEV_INITRD */ 378 } 379 380 #ifdef CONFIG_SMP 381 382 int threads_per_core, threads_per_subcore, threads_shift __read_mostly; 383 cpumask_t threads_core_mask __read_mostly; 384 EXPORT_SYMBOL_GPL(threads_per_core); 385 EXPORT_SYMBOL_GPL(threads_per_subcore); 386 EXPORT_SYMBOL_GPL(threads_shift); 387 EXPORT_SYMBOL_GPL(threads_core_mask); 388 389 static void __init cpu_init_thread_core_maps(int tpc) 390 { 391 int i; 392 393 threads_per_core = tpc; 394 threads_per_subcore = tpc; 395 cpumask_clear(&threads_core_mask); 396 397 /* This implementation only supports power of 2 number of threads 398 * for simplicity and performance 399 */ 400 threads_shift = ilog2(tpc); 401 BUG_ON(tpc != (1 << threads_shift)); 402 403 for (i = 0; i < tpc; i++) 404 cpumask_set_cpu(i, &threads_core_mask); 405 406 printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n", 407 tpc, str_plural(tpc)); 408 printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift); 409 } 410 411 412 u32 *cpu_to_phys_id = NULL; 413 414 static int assign_threads(unsigned int cpu, unsigned int nthreads, bool present, 415 const __be32 *hw_ids) 416 { 417 for (int i = 0; i < nthreads && cpu < nr_cpu_ids; i++) { 418 __be32 hwid; 419 420 hwid = be32_to_cpu(hw_ids[i]); 421 422 DBG(" thread %d -> cpu %d (hard id %d)\n", i, cpu, hwid); 423 424 set_cpu_present(cpu, present); 425 set_cpu_possible(cpu, true); 426 cpu_to_phys_id[cpu] = hwid; 427 cpu++; 428 } 429 430 return cpu; 431 } 432 433 /** 434 * setup_cpu_maps - initialize the following cpu maps: 435 * cpu_possible_mask 436 * cpu_present_mask 437 * 438 * Having the possible map set up early allows us to restrict allocations 439 * of things like irqstacks to nr_cpu_ids rather than NR_CPUS. 440 * 441 * We do not initialize the online map here; cpus set their own bits in 442 * cpu_online_mask as they come up. 443 * 444 * This function is valid only for Open Firmware systems. finish_device_tree 445 * must be called before using this. 446 * 447 * While we're here, we may as well set the "physical" cpu ids in the paca. 448 * 449 * NOTE: This must match the parsing done in early_init_dt_scan_cpus. 450 */ 451 void __init smp_setup_cpu_maps(void) 452 { 453 struct device_node *dn; 454 int cpu = 0; 455 int nthreads = 1; 456 457 DBG("smp_setup_cpu_maps()\n"); 458 459 cpu_to_phys_id = memblock_alloc_or_panic(nr_cpu_ids * sizeof(u32), 460 __alignof__(u32)); 461 462 for_each_node_by_type(dn, "cpu") { 463 const __be32 *intserv; 464 __be32 cpu_be; 465 int len; 466 467 DBG(" * %pOF...\n", dn); 468 469 intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", 470 &len); 471 if (intserv) { 472 DBG(" ibm,ppc-interrupt-server#s -> %lu threads\n", 473 (len / sizeof(int))); 474 } else { 475 DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n"); 476 intserv = of_get_property(dn, "reg", &len); 477 if (!intserv) { 478 cpu_be = cpu_to_be32(cpu); 479 /* XXX: what is this? uninitialized?? */ 480 intserv = &cpu_be; /* assume logical == phys */ 481 len = 4; 482 } 483 } 484 485 nthreads = len / sizeof(int); 486 487 bool avail = of_device_is_available(dn); 488 if (!avail) 489 avail = !of_property_match_string(dn, 490 "enable-method", "spin-table"); 491 492 if (boot_core_hwid >= 0) { 493 if (cpu == 0) { 494 pr_info("Skipping CPU node %pOF to allow for boot core.\n", dn); 495 cpu = nthreads; 496 continue; 497 } 498 499 if (be32_to_cpu(intserv[0]) == boot_core_hwid) { 500 pr_info("Renumbered boot core %pOF to logical 0\n", dn); 501 assign_threads(0, nthreads, avail, intserv); 502 of_node_put(dn); 503 break; 504 } 505 } else if (cpu >= nr_cpu_ids) { 506 of_node_put(dn); 507 break; 508 } 509 510 if (cpu < nr_cpu_ids) 511 cpu = assign_threads(cpu, nthreads, avail, intserv); 512 } 513 514 /* If no SMT supported, nthreads is forced to 1 */ 515 if (!cpu_has_feature(CPU_FTR_SMT)) { 516 DBG(" SMT disabled ! nthreads forced to 1\n"); 517 nthreads = 1; 518 } 519 520 #ifdef CONFIG_PPC64 521 /* 522 * On pSeries LPAR, we need to know how many cpus 523 * could possibly be added to this partition. 524 */ 525 if (firmware_has_feature(FW_FEATURE_LPAR) && 526 (dn = of_find_node_by_path("/rtas"))) { 527 int num_addr_cell, num_size_cell, maxcpus; 528 const __be32 *ireg; 529 530 num_addr_cell = of_n_addr_cells(dn); 531 num_size_cell = of_n_size_cells(dn); 532 533 ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL); 534 535 if (!ireg) 536 goto out; 537 538 maxcpus = be32_to_cpup(ireg + num_addr_cell + num_size_cell); 539 540 /* Double maxcpus for processors which have SMT capability */ 541 if (cpu_has_feature(CPU_FTR_SMT)) 542 maxcpus *= nthreads; 543 544 if (maxcpus > nr_cpu_ids) { 545 printk(KERN_WARNING 546 "Partition configured for %d cpus, " 547 "operating system maximum is %u.\n", 548 maxcpus, nr_cpu_ids); 549 maxcpus = nr_cpu_ids; 550 } else 551 printk(KERN_INFO "Partition configured for %d cpus.\n", 552 maxcpus); 553 554 for (cpu = 0; cpu < maxcpus; cpu++) 555 set_cpu_possible(cpu, true); 556 out: 557 of_node_put(dn); 558 } 559 #endif 560 #ifdef CONFIG_PPC64_PROC_SYSTEMCFG 561 systemcfg->processorCount = num_present_cpus(); 562 #endif /* CONFIG_PPC64 */ 563 564 /* Initialize CPU <=> thread mapping/ 565 * 566 * WARNING: We assume that the number of threads is the same for 567 * every CPU in the system. If that is not the case, then some code 568 * here will have to be reworked 569 */ 570 cpu_init_thread_core_maps(nthreads); 571 572 /* Now that possible cpus are set, set nr_cpu_ids for later use */ 573 setup_nr_cpu_ids(); 574 575 free_unused_pacas(); 576 } 577 #endif /* CONFIG_SMP */ 578 579 #ifdef CONFIG_PCSPKR_PLATFORM 580 static __init int add_pcspkr(void) 581 { 582 struct device_node *np; 583 struct platform_device *pd; 584 int ret; 585 586 np = of_find_compatible_node(NULL, NULL, "pnpPNP,100"); 587 of_node_put(np); 588 if (!np) 589 return -ENODEV; 590 591 pd = platform_device_alloc("pcspkr", -1); 592 if (!pd) 593 return -ENOMEM; 594 595 ret = platform_device_add(pd); 596 if (ret) 597 platform_device_put(pd); 598 599 return ret; 600 } 601 device_initcall(add_pcspkr); 602 #endif /* CONFIG_PCSPKR_PLATFORM */ 603 604 static char ppc_hw_desc_buf[128] __initdata; 605 606 struct seq_buf ppc_hw_desc __initdata = { 607 .buffer = ppc_hw_desc_buf, 608 .size = sizeof(ppc_hw_desc_buf), 609 .len = 0, 610 }; 611 612 static __init void probe_machine(void) 613 { 614 extern struct machdep_calls __machine_desc_start; 615 extern struct machdep_calls __machine_desc_end; 616 unsigned int i; 617 618 /* 619 * Iterate all ppc_md structures until we find the proper 620 * one for the current machine type 621 */ 622 DBG("Probing machine type ...\n"); 623 624 /* 625 * Check ppc_md is empty, if not we have a bug, ie, we setup an 626 * entry before probe_machine() which will be overwritten 627 */ 628 for (i = 0; i < (sizeof(ppc_md) / sizeof(void *)); i++) { 629 if (((void **)&ppc_md)[i]) { 630 printk(KERN_ERR "Entry %d in ppc_md non empty before" 631 " machine probe !\n", i); 632 } 633 } 634 635 for (machine_id = &__machine_desc_start; 636 machine_id < &__machine_desc_end; 637 machine_id++) { 638 DBG(" %s ...\n", machine_id->name); 639 if (machine_id->compatible && !of_machine_is_compatible(machine_id->compatible)) 640 continue; 641 if (machine_id->compatibles && !of_machine_compatible_match(machine_id->compatibles)) 642 continue; 643 memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls)); 644 if (ppc_md.probe && !ppc_md.probe()) 645 continue; 646 DBG(" %s match !\n", machine_id->name); 647 break; 648 } 649 /* What can we do if we didn't find ? */ 650 if (machine_id >= &__machine_desc_end) { 651 pr_err("No suitable machine description found !\n"); 652 for (;;); 653 } 654 655 // Append the machine name to other info we've gathered 656 seq_buf_puts(&ppc_hw_desc, ppc_md.name); 657 658 // Set the generic hardware description shown in oopses 659 dump_stack_set_arch_desc(ppc_hw_desc.buffer); 660 661 pr_info("Hardware name: %s\n", ppc_hw_desc.buffer); 662 } 663 664 /* Match a class of boards, not a specific device configuration. */ 665 int check_legacy_ioport(unsigned long base_port) 666 { 667 struct device_node *parent, *np = NULL; 668 int ret = -ENODEV; 669 670 switch(base_port) { 671 case I8042_DATA_REG: 672 if (!(np = of_find_compatible_node(NULL, NULL, "pnpPNP,303"))) 673 np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03"); 674 if (np) { 675 parent = of_get_parent(np); 676 677 of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0); 678 if (!of_i8042_kbd_irq) 679 of_i8042_kbd_irq = 1; 680 681 of_i8042_aux_irq = irq_of_parse_and_map(parent, 1); 682 if (!of_i8042_aux_irq) 683 of_i8042_aux_irq = 12; 684 685 of_node_put(np); 686 np = parent; 687 break; 688 } 689 np = of_find_node_by_type(NULL, "8042"); 690 /* Pegasos has no device_type on its 8042 node, look for the 691 * name instead */ 692 if (!np) 693 np = of_find_node_by_name(NULL, "8042"); 694 if (np) { 695 of_i8042_kbd_irq = 1; 696 of_i8042_aux_irq = 12; 697 } 698 break; 699 case FDC_BASE: /* FDC1 */ 700 np = of_find_node_by_type(NULL, "fdc"); 701 break; 702 default: 703 /* ipmi is supposed to fail here */ 704 break; 705 } 706 if (!np) 707 return ret; 708 parent = of_get_parent(np); 709 if (parent) { 710 if (of_node_is_type(parent, "isa")) 711 ret = 0; 712 of_node_put(parent); 713 } 714 of_node_put(np); 715 return ret; 716 } 717 EXPORT_SYMBOL(check_legacy_ioport); 718 719 /* 720 * Panic notifiers setup 721 * 722 * We have 3 notifiers for powerpc, each one from a different "nature": 723 * 724 * - ppc_panic_fadump_handler() is a hypervisor notifier, which hard-disables 725 * IRQs and deal with the Firmware-Assisted dump, when it is configured; 726 * should run early in the panic path. 727 * 728 * - dump_kernel_offset() is an informative notifier, just showing the KASLR 729 * offset if we have RANDOMIZE_BASE set. 730 * 731 * - ppc_panic_platform_handler() is a low-level handler that's registered 732 * only if the platform wishes to perform final actions in the panic path, 733 * hence it should run late and might not even return. Currently, only 734 * pseries and ps3 platforms register callbacks. 735 */ 736 static int ppc_panic_fadump_handler(struct notifier_block *this, 737 unsigned long event, void *ptr) 738 { 739 /* 740 * panic does a local_irq_disable, but we really 741 * want interrupts to be hard disabled. 742 */ 743 hard_irq_disable(); 744 745 /* 746 * Invoke kmsg_dump (e.g., pstore) before crash_fadump() as fadump 747 * runs before panic()'s kmsg_dump_desc() call. 748 */ 749 if (should_fadump_crash()) 750 kmsg_dump_desc(KMSG_DUMP_PANIC, (char *)ptr); 751 752 /* 753 * If firmware-assisted dump has been registered then trigger 754 * its callback and let the firmware handles everything else. 755 */ 756 crash_fadump(NULL, ptr); 757 758 return NOTIFY_DONE; 759 } 760 761 static int dump_kernel_offset(struct notifier_block *self, unsigned long v, 762 void *p) 763 { 764 pr_emerg("Kernel Offset: 0x%lx from 0x%lx\n", 765 kaslr_offset(), KERNELBASE); 766 767 return NOTIFY_DONE; 768 } 769 770 static int ppc_panic_platform_handler(struct notifier_block *this, 771 unsigned long event, void *ptr) 772 { 773 /* 774 * This handler is only registered if we have a panic callback 775 * on ppc_md, hence NULL check is not needed. 776 * Also, it may not return, so it runs really late on panic path. 777 */ 778 ppc_md.panic(ptr); 779 780 return NOTIFY_DONE; 781 } 782 783 static struct notifier_block ppc_fadump_block = { 784 .notifier_call = ppc_panic_fadump_handler, 785 .priority = INT_MAX, /* run early, to notify the firmware ASAP */ 786 }; 787 788 static struct notifier_block kernel_offset_notifier = { 789 .notifier_call = dump_kernel_offset, 790 }; 791 792 static struct notifier_block ppc_panic_block = { 793 .notifier_call = ppc_panic_platform_handler, 794 .priority = INT_MIN, /* may not return; must be done last */ 795 }; 796 797 void __init setup_panic(void) 798 { 799 /* Hard-disables IRQs + deal with FW-assisted dump (fadump) */ 800 atomic_notifier_chain_register(&panic_notifier_list, 801 &ppc_fadump_block); 802 803 if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset() > 0) 804 atomic_notifier_chain_register(&panic_notifier_list, 805 &kernel_offset_notifier); 806 807 /* Low-level platform-specific routines that should run on panic */ 808 if (ppc_md.panic) 809 atomic_notifier_chain_register(&panic_notifier_list, 810 &ppc_panic_block); 811 } 812 813 #ifdef CONFIG_CHECK_CACHE_COHERENCY 814 /* 815 * For platforms that have configurable cache-coherency. This function 816 * checks that the cache coherency setting of the kernel matches the setting 817 * left by the firmware, as indicated in the device tree. Since a mismatch 818 * will eventually result in DMA failures, we print * and error and call 819 * BUG() in that case. 820 */ 821 822 #define KERNEL_COHERENCY (!IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) 823 824 static int __init check_cache_coherency(void) 825 { 826 struct device_node *np; 827 const void *prop; 828 bool devtree_coherency; 829 830 np = of_find_node_by_path("/"); 831 prop = of_get_property(np, "coherency-off", NULL); 832 of_node_put(np); 833 834 devtree_coherency = prop ? false : true; 835 836 if (devtree_coherency != KERNEL_COHERENCY) { 837 printk(KERN_ERR 838 "kernel coherency:%s != device tree_coherency:%s\n", 839 str_on_off(KERNEL_COHERENCY), 840 str_on_off(devtree_coherency)); 841 BUG(); 842 } 843 844 return 0; 845 } 846 847 late_initcall(check_cache_coherency); 848 #endif /* CONFIG_CHECK_CACHE_COHERENCY */ 849 850 void ppc_printk_progress(char *s, unsigned short hex) 851 { 852 pr_info("%s\n", s); 853 } 854 855 static __init void print_system_info(void) 856 { 857 pr_info("-----------------------------------------------------\n"); 858 pr_info("phys_mem_size = 0x%llx\n", 859 (unsigned long long)memblock_phys_mem_size()); 860 861 pr_info("dcache_bsize = 0x%x\n", dcache_bsize); 862 pr_info("icache_bsize = 0x%x\n", icache_bsize); 863 864 pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features); 865 pr_info(" possible = 0x%016lx\n", 866 (unsigned long)CPU_FTRS_POSSIBLE); 867 pr_info(" always = 0x%016lx\n", 868 (unsigned long)CPU_FTRS_ALWAYS); 869 pr_info("cpu_user_features = 0x%08x 0x%08x\n", 870 cur_cpu_spec->cpu_user_features, 871 cur_cpu_spec->cpu_user_features2); 872 pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features); 873 pr_info(" possible = 0x%016lx\n", 874 (unsigned long)MMU_FTRS_POSSIBLE); 875 pr_info(" always = 0x%016lx\n", 876 (unsigned long)MMU_FTRS_ALWAYS); 877 #ifdef CONFIG_PPC64 878 pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features); 879 #ifdef CONFIG_PPC_BOOK3S 880 pr_info("vmalloc start = 0x%lx\n", KERN_VIRT_START); 881 pr_info("IO start = 0x%lx\n", KERN_IO_START); 882 pr_info("vmemmap start = 0x%lx\n", (unsigned long)vmemmap); 883 #endif 884 #endif 885 886 if (!early_radix_enabled()) 887 print_system_hash_info(); 888 889 if (PHYSICAL_START > 0) 890 pr_info("physical_start = 0x%llx\n", 891 (unsigned long long)PHYSICAL_START); 892 pr_info("-----------------------------------------------------\n"); 893 } 894 895 #ifdef CONFIG_SMP 896 static void __init smp_setup_pacas(void) 897 { 898 int cpu; 899 900 for_each_possible_cpu(cpu) { 901 if (cpu == smp_processor_id()) 902 continue; 903 allocate_paca(cpu); 904 set_hard_smp_processor_id(cpu, cpu_to_phys_id[cpu]); 905 } 906 907 memblock_free(cpu_to_phys_id, nr_cpu_ids * sizeof(u32)); 908 cpu_to_phys_id = NULL; 909 } 910 #endif 911 912 /* 913 * Called into from start_kernel this initializes memblock, which is used 914 * to manage page allocation until mem_init is called. 915 */ 916 void __init setup_arch(char **cmdline_p) 917 { 918 kasan_init(); 919 920 *cmdline_p = boot_command_line; 921 922 /* Set a half-reasonable default so udelay does something sensible */ 923 loops_per_jiffy = 500000000 / HZ; 924 925 /* Unflatten the device-tree passed by prom_init or kexec */ 926 unflatten_device_tree(); 927 928 /* 929 * Initialize cache line/block info from device-tree (on ppc64) or 930 * just cputable (on ppc32). 931 */ 932 initialize_cache_info(); 933 934 /* Initialize RTAS if available. */ 935 rtas_initialize(); 936 937 /* Check if we have an initrd provided via the device-tree. */ 938 check_for_initrd(); 939 940 /* Probe the machine type, establish ppc_md. */ 941 probe_machine(); 942 943 /* Setup panic notifier if requested by the platform. */ 944 setup_panic(); 945 946 /* 947 * Configure ppc_md.power_save (ppc32 only, 64-bit machines do 948 * it from their respective probe() function. 949 */ 950 setup_power_save(); 951 952 /* Discover standard serial ports. */ 953 find_legacy_serial_ports(); 954 955 /* Register early console with the printk subsystem. */ 956 register_early_udbg_console(); 957 958 /* Setup the various CPU maps based on the device-tree. */ 959 smp_setup_cpu_maps(); 960 961 /* Initialize xmon. */ 962 xmon_setup(); 963 964 /* Check the SMT related command line arguments (ppc64). */ 965 check_smt_enabled(); 966 967 /* Parse memory topology */ 968 mem_topology_setup(); 969 high_memory = (void *)__va(max_low_pfn * PAGE_SIZE); 970 971 /* 972 * Release secondary cpus out of their spinloops at 0x60 now that 973 * we can map physical -> logical CPU ids. 974 * 975 * Freescale Book3e parts spin in a loop provided by firmware, 976 * so smp_release_cpus() does nothing for them. 977 */ 978 #ifdef CONFIG_SMP 979 smp_setup_pacas(); 980 981 /* On BookE, setup per-core TLB data structures. */ 982 setup_tlb_core_data(); 983 #endif 984 985 /* Print various info about the machine that has been gathered so far. */ 986 print_system_info(); 987 988 klp_init_thread_info(&init_task); 989 990 setup_initial_init_mm(_stext, _etext, _edata, _end); 991 /* sched_init() does the mmgrab(&init_mm) for the primary CPU */ 992 VM_WARN_ON(cpumask_test_cpu(smp_processor_id(), mm_cpumask(&init_mm))); 993 cpumask_set_cpu(smp_processor_id(), mm_cpumask(&init_mm)); 994 inc_mm_active_cpus(&init_mm); 995 mm_iommu_init(&init_mm); 996 997 irqstack_early_init(); 998 exc_lvl_early_init(); 999 emergency_stack_init(); 1000 1001 mce_init(); 1002 smp_release_cpus(); 1003 1004 initmem_init(); 1005 1006 early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT); 1007 1008 if (ppc_md.setup_arch) 1009 ppc_md.setup_arch(); 1010 1011 setup_barrier_nospec(); 1012 setup_spectre_v2(); 1013 1014 paging_init(); 1015 1016 /* Initialize the MMU context management stuff. */ 1017 mmu_context_init(); 1018 1019 /* Interrupt code needs to be 64K-aligned. */ 1020 if (IS_ENABLED(CONFIG_PPC64) && (unsigned long)_stext & 0xffff) 1021 panic("Kernelbase not 64K-aligned (0x%lx)!\n", 1022 (unsigned long)_stext); 1023 } 1024