1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * intel_powerclamp.c - package c-state idle injection
4 *
5 * Copyright (c) 2012-2023, Intel Corporation.
6 *
7 * Authors:
8 * Arjan van de Ven <arjan@linux.intel.com>
9 * Jacob Pan <jacob.jun.pan@linux.intel.com>
10 *
11 * TODO:
12 * 1. better handle wakeup from external interrupts, currently a fixed
13 * compensation is added to clamping duration when excessive amount
14 * of wakeups are observed during idle time. the reason is that in
15 * case of external interrupts without need for ack, clamping down
16 * cpu in non-irq context does not reduce irq. for majority of the
17 * cases, clamping down cpu does help reduce irq as well, we should
18 * be able to differentiate the two cases and give a quantitative
19 * solution for the irqs that we can control. perhaps based on
20 * get_cpu_iowait_time_us()
21 *
22 * 2. synchronization with other hw blocks
23 */
24
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26
27 #include <linux/module.h>
28 #include <linux/kernel.h>
29 #include <linux/delay.h>
30 #include <linux/cpu.h>
31 #include <linux/thermal.h>
32 #include <linux/debugfs.h>
33 #include <linux/seq_file.h>
34 #include <linux/idle_inject.h>
35
36 #include <asm/msr.h>
37 #include <asm/mwait.h>
38 #include <asm/cpu_device_id.h>
39
40 #define MAX_TARGET_RATIO (100U)
41 /* For each undisturbed clamping period (no extra wake ups during idle time),
42 * we increment the confidence counter for the given target ratio.
43 * CONFIDENCE_OK defines the level where runtime calibration results are
44 * valid.
45 */
46 #define CONFIDENCE_OK (3)
47 /* Default idle injection duration, driver adjust sleep time to meet target
48 * idle ratio. Similar to frequency modulation.
49 */
50 #define DEFAULT_DURATION_JIFFIES (6)
51
52 static struct dentry *debug_dir;
53 static bool poll_pkg_cstate_enable;
54
55 /* Idle ratio observed using package C-state counters */
56 static unsigned int current_ratio;
57
58 /* Skip the idle injection till set to true */
59 static bool should_skip;
60
61 struct powerclamp_data {
62 unsigned int cpu;
63 unsigned int count;
64 unsigned int guard;
65 unsigned int window_size_now;
66 unsigned int target_ratio;
67 bool clamping;
68 };
69
70 static struct powerclamp_data powerclamp_data;
71
72 static struct thermal_cooling_device *cooling_dev;
73
74 static DEFINE_MUTEX(powerclamp_lock);
75
76 /* This duration is in microseconds */
77 static unsigned int duration;
78 static unsigned int pkg_cstate_ratio_cur;
79 static unsigned int window_size;
80
duration_set(const char * arg,const struct kernel_param * kp)81 static int duration_set(const char *arg, const struct kernel_param *kp)
82 {
83 int ret = 0;
84 unsigned long new_duration;
85
86 ret = kstrtoul(arg, 10, &new_duration);
87 if (ret)
88 goto exit;
89 if (new_duration > 25 || new_duration < 6) {
90 pr_err("Out of recommended range %lu, between 6-25ms\n",
91 new_duration);
92 ret = -EINVAL;
93 goto exit;
94 }
95
96 mutex_lock(&powerclamp_lock);
97 duration = clamp(new_duration, 6ul, 25ul) * 1000;
98 mutex_unlock(&powerclamp_lock);
99 exit:
100
101 return ret;
102 }
103
duration_get(char * buf,const struct kernel_param * kp)104 static int duration_get(char *buf, const struct kernel_param *kp)
105 {
106 int ret;
107
108 mutex_lock(&powerclamp_lock);
109 ret = sysfs_emit(buf, "%d\n", duration / 1000);
110 mutex_unlock(&powerclamp_lock);
111
112 return ret;
113 }
114
115 static const struct kernel_param_ops duration_ops = {
116 .set = duration_set,
117 .get = duration_get,
118 };
119
120 module_param_cb(duration, &duration_ops, NULL, 0644);
121 MODULE_PARM_DESC(duration, "forced idle time for each attempt in msec.");
122
123 #define DEFAULT_MAX_IDLE 50
124 #define MAX_ALL_CPU_IDLE 75
125
126 static u8 max_idle = DEFAULT_MAX_IDLE;
127
128 static cpumask_var_t idle_injection_cpu_mask;
129
allocate_copy_idle_injection_mask(const struct cpumask * copy_mask)130 static int allocate_copy_idle_injection_mask(const struct cpumask *copy_mask)
131 {
132 if (cpumask_available(idle_injection_cpu_mask))
133 goto copy_mask;
134
135 /* This mask is allocated only one time and freed during module exit */
136 if (!alloc_cpumask_var(&idle_injection_cpu_mask, GFP_KERNEL))
137 return -ENOMEM;
138
139 copy_mask:
140 cpumask_copy(idle_injection_cpu_mask, copy_mask);
141
142 return 0;
143 }
144
145 /* Return true if the cpumask and idle percent combination is invalid */
check_invalid(cpumask_var_t mask,u8 idle)146 static bool check_invalid(cpumask_var_t mask, u8 idle)
147 {
148 if (cpumask_equal(cpu_present_mask, mask) && idle > MAX_ALL_CPU_IDLE)
149 return true;
150
151 return false;
152 }
153
cpumask_set(const char * arg,const struct kernel_param * kp)154 static int cpumask_set(const char *arg, const struct kernel_param *kp)
155 {
156 cpumask_var_t new_mask;
157 int ret;
158
159 mutex_lock(&powerclamp_lock);
160
161 /* Can't set mask when cooling device is in use */
162 if (powerclamp_data.clamping) {
163 ret = -EAGAIN;
164 goto skip_cpumask_set;
165 }
166
167 ret = alloc_cpumask_var(&new_mask, GFP_KERNEL);
168 if (!ret)
169 goto skip_cpumask_set;
170
171 ret = bitmap_parse(arg, strlen(arg), cpumask_bits(new_mask),
172 nr_cpumask_bits);
173 if (ret)
174 goto free_cpumask_set;
175
176 if (cpumask_empty(new_mask) || check_invalid(new_mask, max_idle)) {
177 ret = -EINVAL;
178 goto free_cpumask_set;
179 }
180
181 /*
182 * When module parameters are passed from kernel command line
183 * during insmod, the module parameter callback is called
184 * before powerclamp_init(), so we can't assume that some
185 * cpumask can be allocated and copied before here. Also
186 * in this case this cpumask is used as the default mask.
187 */
188 ret = allocate_copy_idle_injection_mask(new_mask);
189
190 free_cpumask_set:
191 free_cpumask_var(new_mask);
192 skip_cpumask_set:
193 mutex_unlock(&powerclamp_lock);
194
195 return ret;
196 }
197
cpumask_get(char * buf,const struct kernel_param * kp)198 static int cpumask_get(char *buf, const struct kernel_param *kp)
199 {
200 if (!cpumask_available(idle_injection_cpu_mask))
201 return -ENODEV;
202
203 return bitmap_print_to_pagebuf(false, buf, cpumask_bits(idle_injection_cpu_mask),
204 nr_cpumask_bits);
205 }
206
207 static const struct kernel_param_ops cpumask_ops = {
208 .set = cpumask_set,
209 .get = cpumask_get,
210 };
211
212 module_param_cb(cpumask, &cpumask_ops, NULL, 0644);
213 MODULE_PARM_DESC(cpumask, "Mask of CPUs to use for idle injection.");
214
max_idle_set(const char * arg,const struct kernel_param * kp)215 static int max_idle_set(const char *arg, const struct kernel_param *kp)
216 {
217 u8 new_max_idle;
218 int ret = 0;
219
220 mutex_lock(&powerclamp_lock);
221
222 /* Can't set mask when cooling device is in use */
223 if (powerclamp_data.clamping) {
224 ret = -EAGAIN;
225 goto skip_limit_set;
226 }
227
228 ret = kstrtou8(arg, 10, &new_max_idle);
229 if (ret)
230 goto skip_limit_set;
231
232 if (new_max_idle > MAX_TARGET_RATIO) {
233 ret = -EINVAL;
234 goto skip_limit_set;
235 }
236
237 if (!cpumask_available(idle_injection_cpu_mask)) {
238 ret = allocate_copy_idle_injection_mask(cpu_present_mask);
239 if (ret)
240 goto skip_limit_set;
241 }
242
243 if (check_invalid(idle_injection_cpu_mask, new_max_idle)) {
244 ret = -EINVAL;
245 goto skip_limit_set;
246 }
247
248 max_idle = new_max_idle;
249
250 skip_limit_set:
251 mutex_unlock(&powerclamp_lock);
252
253 return ret;
254 }
255
256 static const struct kernel_param_ops max_idle_ops = {
257 .set = max_idle_set,
258 .get = param_get_byte,
259 };
260
261 module_param_cb(max_idle, &max_idle_ops, &max_idle, 0644);
262 MODULE_PARM_DESC(max_idle, "maximum injected idle time to the total CPU time ratio in percent range:1-100");
263
264 struct powerclamp_calibration_data {
265 unsigned long confidence; /* used for calibration, basically a counter
266 * gets incremented each time a clamping
267 * period is completed without extra wakeups
268 * once that counter is reached given level,
269 * compensation is deemed usable.
270 */
271 unsigned long steady_comp; /* steady state compensation used when
272 * no extra wakeups occurred.
273 */
274 unsigned long dynamic_comp; /* compensate excessive wakeup from idle
275 * mostly from external interrupts.
276 */
277 };
278
279 static struct powerclamp_calibration_data cal_data[MAX_TARGET_RATIO];
280
window_size_set(const char * arg,const struct kernel_param * kp)281 static int window_size_set(const char *arg, const struct kernel_param *kp)
282 {
283 int ret = 0;
284 unsigned long new_window_size;
285
286 ret = kstrtoul(arg, 10, &new_window_size);
287 if (ret)
288 goto exit_win;
289 if (new_window_size > 10 || new_window_size < 2) {
290 pr_err("Out of recommended window size %lu, between 2-10\n",
291 new_window_size);
292 ret = -EINVAL;
293 }
294
295 window_size = clamp(new_window_size, 2ul, 10ul);
296 smp_mb();
297
298 exit_win:
299
300 return ret;
301 }
302
303 static const struct kernel_param_ops window_size_ops = {
304 .set = window_size_set,
305 .get = param_get_int,
306 };
307
308 module_param_cb(window_size, &window_size_ops, &window_size, 0644);
309 MODULE_PARM_DESC(window_size, "sliding window in number of clamping cycles\n"
310 "\tpowerclamp controls idle ratio within this window. larger\n"
311 "\twindow size results in slower response time but more smooth\n"
312 "\tclamping results. default to 2.");
313
314 struct pkg_cstate_info {
315 bool skip;
316 int msr_index;
317 int cstate_id;
318 };
319
320 #define PKG_CSTATE_INIT(id) { \
321 .msr_index = MSR_PKG_C##id##_RESIDENCY, \
322 .cstate_id = id \
323 }
324
325 static struct pkg_cstate_info pkg_cstates[] = {
326 PKG_CSTATE_INIT(2),
327 PKG_CSTATE_INIT(3),
328 PKG_CSTATE_INIT(6),
329 PKG_CSTATE_INIT(7),
330 PKG_CSTATE_INIT(8),
331 PKG_CSTATE_INIT(9),
332 PKG_CSTATE_INIT(10),
333 {NULL},
334 };
335
has_pkg_state_counter(void)336 static bool has_pkg_state_counter(void)
337 {
338 u64 val;
339 struct pkg_cstate_info *info = pkg_cstates;
340
341 /* check if any one of the counter msrs exists */
342 while (info->msr_index) {
343 if (!rdmsrl_safe(info->msr_index, &val))
344 return true;
345 info++;
346 }
347
348 return false;
349 }
350
pkg_state_counter(void)351 static u64 pkg_state_counter(void)
352 {
353 u64 val;
354 u64 count = 0;
355 struct pkg_cstate_info *info = pkg_cstates;
356
357 while (info->msr_index) {
358 if (!info->skip) {
359 if (!rdmsrl_safe(info->msr_index, &val))
360 count += val;
361 else
362 info->skip = true;
363 }
364 info++;
365 }
366
367 return count;
368 }
369
get_compensation(int ratio)370 static unsigned int get_compensation(int ratio)
371 {
372 unsigned int comp = 0;
373
374 if (!poll_pkg_cstate_enable)
375 return 0;
376
377 /* we only use compensation if all adjacent ones are good */
378 if (ratio == 1 &&
379 cal_data[ratio].confidence >= CONFIDENCE_OK &&
380 cal_data[ratio + 1].confidence >= CONFIDENCE_OK &&
381 cal_data[ratio + 2].confidence >= CONFIDENCE_OK) {
382 comp = (cal_data[ratio].steady_comp +
383 cal_data[ratio + 1].steady_comp +
384 cal_data[ratio + 2].steady_comp) / 3;
385 } else if (ratio == MAX_TARGET_RATIO - 1 &&
386 cal_data[ratio].confidence >= CONFIDENCE_OK &&
387 cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
388 cal_data[ratio - 2].confidence >= CONFIDENCE_OK) {
389 comp = (cal_data[ratio].steady_comp +
390 cal_data[ratio - 1].steady_comp +
391 cal_data[ratio - 2].steady_comp) / 3;
392 } else if (cal_data[ratio].confidence >= CONFIDENCE_OK &&
393 cal_data[ratio - 1].confidence >= CONFIDENCE_OK &&
394 cal_data[ratio + 1].confidence >= CONFIDENCE_OK) {
395 comp = (cal_data[ratio].steady_comp +
396 cal_data[ratio - 1].steady_comp +
397 cal_data[ratio + 1].steady_comp) / 3;
398 }
399
400 /* do not exceed limit */
401 if (comp + ratio >= MAX_TARGET_RATIO)
402 comp = MAX_TARGET_RATIO - ratio - 1;
403
404 return comp;
405 }
406
adjust_compensation(int target_ratio,unsigned int win)407 static void adjust_compensation(int target_ratio, unsigned int win)
408 {
409 int delta;
410 struct powerclamp_calibration_data *d = &cal_data[target_ratio];
411
412 /*
413 * adjust compensations if confidence level has not been reached.
414 */
415 if (d->confidence >= CONFIDENCE_OK)
416 return;
417
418 delta = powerclamp_data.target_ratio - current_ratio;
419 /* filter out bad data */
420 if (delta >= 0 && delta <= (1+target_ratio/10)) {
421 if (d->steady_comp)
422 d->steady_comp =
423 roundup(delta+d->steady_comp, 2)/2;
424 else
425 d->steady_comp = delta;
426 d->confidence++;
427 }
428 }
429
powerclamp_adjust_controls(unsigned int target_ratio,unsigned int guard,unsigned int win)430 static bool powerclamp_adjust_controls(unsigned int target_ratio,
431 unsigned int guard, unsigned int win)
432 {
433 static u64 msr_last, tsc_last;
434 u64 msr_now, tsc_now;
435 u64 val64;
436
437 /* check result for the last window */
438 msr_now = pkg_state_counter();
439 tsc_now = rdtsc();
440
441 /* calculate pkg cstate vs tsc ratio */
442 if (!msr_last || !tsc_last)
443 current_ratio = 1;
444 else if (tsc_now-tsc_last) {
445 val64 = 100*(msr_now-msr_last);
446 do_div(val64, (tsc_now-tsc_last));
447 current_ratio = val64;
448 }
449
450 /* update record */
451 msr_last = msr_now;
452 tsc_last = tsc_now;
453
454 adjust_compensation(target_ratio, win);
455
456 /* if we are above target+guard, skip */
457 return powerclamp_data.target_ratio + guard <= current_ratio;
458 }
459
460 /*
461 * This function calculates runtime from the current target ratio.
462 * This function gets called under powerclamp_lock.
463 */
get_run_time(void)464 static unsigned int get_run_time(void)
465 {
466 unsigned int compensated_ratio;
467 unsigned int runtime;
468
469 /*
470 * make sure user selected ratio does not take effect until
471 * the next round. adjust target_ratio if user has changed
472 * target such that we can converge quickly.
473 */
474 powerclamp_data.guard = 1 + powerclamp_data.target_ratio / 20;
475 powerclamp_data.window_size_now = window_size;
476
477 /*
478 * systems may have different ability to enter package level
479 * c-states, thus we need to compensate the injected idle ratio
480 * to achieve the actual target reported by the HW.
481 */
482 compensated_ratio = powerclamp_data.target_ratio +
483 get_compensation(powerclamp_data.target_ratio);
484 if (compensated_ratio <= 0)
485 compensated_ratio = 1;
486
487 runtime = duration * 100 / compensated_ratio - duration;
488
489 return runtime;
490 }
491
492 /*
493 * 1 HZ polling while clamping is active, useful for userspace
494 * to monitor actual idle ratio.
495 */
496 static void poll_pkg_cstate(struct work_struct *dummy);
497 static DECLARE_DELAYED_WORK(poll_pkg_cstate_work, poll_pkg_cstate);
poll_pkg_cstate(struct work_struct * dummy)498 static void poll_pkg_cstate(struct work_struct *dummy)
499 {
500 static u64 msr_last;
501 static u64 tsc_last;
502
503 u64 msr_now;
504 u64 tsc_now;
505 u64 val64;
506
507 msr_now = pkg_state_counter();
508 tsc_now = rdtsc();
509
510 /* calculate pkg cstate vs tsc ratio */
511 if (!msr_last || !tsc_last)
512 pkg_cstate_ratio_cur = 1;
513 else {
514 if (tsc_now - tsc_last) {
515 val64 = 100 * (msr_now - msr_last);
516 do_div(val64, (tsc_now - tsc_last));
517 pkg_cstate_ratio_cur = val64;
518 }
519 }
520
521 /* update record */
522 msr_last = msr_now;
523 tsc_last = tsc_now;
524
525 mutex_lock(&powerclamp_lock);
526 if (powerclamp_data.clamping)
527 schedule_delayed_work(&poll_pkg_cstate_work, HZ);
528 mutex_unlock(&powerclamp_lock);
529 }
530
531 static struct idle_inject_device *ii_dev;
532
533 /*
534 * This function is called from idle injection core on timer expiry
535 * for the run duration. This allows powerclamp to readjust or skip
536 * injecting idle for this cycle.
537 */
idle_inject_update(void)538 static bool idle_inject_update(void)
539 {
540 bool update = false;
541
542 /* We can't sleep in this callback */
543 if (!mutex_trylock(&powerclamp_lock))
544 return true;
545
546 if (!(powerclamp_data.count % powerclamp_data.window_size_now)) {
547
548 should_skip = powerclamp_adjust_controls(powerclamp_data.target_ratio,
549 powerclamp_data.guard,
550 powerclamp_data.window_size_now);
551 update = true;
552 }
553
554 if (update) {
555 unsigned int runtime = get_run_time();
556
557 idle_inject_set_duration(ii_dev, runtime, duration);
558 }
559
560 powerclamp_data.count++;
561
562 mutex_unlock(&powerclamp_lock);
563
564 if (should_skip)
565 return false;
566
567 return true;
568 }
569
570 /* This function starts idle injection by calling idle_inject_start() */
trigger_idle_injection(void)571 static void trigger_idle_injection(void)
572 {
573 unsigned int runtime = get_run_time();
574
575 idle_inject_set_duration(ii_dev, runtime, duration);
576 idle_inject_start(ii_dev);
577 powerclamp_data.clamping = true;
578 }
579
580 /*
581 * This function is called from start_power_clamp() to register
582 * CPUS with powercap idle injection register and set default
583 * idle duration and latency.
584 */
powerclamp_idle_injection_register(void)585 static int powerclamp_idle_injection_register(void)
586 {
587 poll_pkg_cstate_enable = false;
588 if (cpumask_equal(cpu_present_mask, idle_injection_cpu_mask)) {
589 ii_dev = idle_inject_register_full(idle_injection_cpu_mask, idle_inject_update);
590 if (topology_max_packages() == 1 && topology_max_dies_per_package() == 1)
591 poll_pkg_cstate_enable = true;
592 } else {
593 ii_dev = idle_inject_register(idle_injection_cpu_mask);
594 }
595
596 if (!ii_dev) {
597 pr_err("powerclamp: idle_inject_register failed\n");
598 return -EAGAIN;
599 }
600
601 idle_inject_set_duration(ii_dev, TICK_USEC, duration);
602 idle_inject_set_latency(ii_dev, UINT_MAX);
603
604 return 0;
605 }
606
607 /*
608 * This function is called from end_power_clamp() to stop idle injection
609 * and unregister CPUS from powercap idle injection core.
610 */
remove_idle_injection(void)611 static void remove_idle_injection(void)
612 {
613 if (!powerclamp_data.clamping)
614 return;
615
616 powerclamp_data.clamping = false;
617 idle_inject_stop(ii_dev);
618 }
619
620 /*
621 * This function is called when user change the cooling device
622 * state from zero to some other value.
623 */
start_power_clamp(void)624 static int start_power_clamp(void)
625 {
626 int ret;
627
628 ret = powerclamp_idle_injection_register();
629 if (!ret) {
630 trigger_idle_injection();
631 if (poll_pkg_cstate_enable)
632 schedule_delayed_work(&poll_pkg_cstate_work, 0);
633 }
634
635 return ret;
636 }
637
638 /*
639 * This function is called when user change the cooling device
640 * state from non zero value zero.
641 */
end_power_clamp(void)642 static void end_power_clamp(void)
643 {
644 if (powerclamp_data.clamping) {
645 remove_idle_injection();
646 idle_inject_unregister(ii_dev);
647 }
648 }
649
powerclamp_get_max_state(struct thermal_cooling_device * cdev,unsigned long * state)650 static int powerclamp_get_max_state(struct thermal_cooling_device *cdev,
651 unsigned long *state)
652 {
653 *state = MAX_TARGET_RATIO;
654
655 return 0;
656 }
657
powerclamp_get_cur_state(struct thermal_cooling_device * cdev,unsigned long * state)658 static int powerclamp_get_cur_state(struct thermal_cooling_device *cdev,
659 unsigned long *state)
660 {
661 mutex_lock(&powerclamp_lock);
662 *state = powerclamp_data.target_ratio;
663 mutex_unlock(&powerclamp_lock);
664
665 return 0;
666 }
667
powerclamp_set_cur_state(struct thermal_cooling_device * cdev,unsigned long new_target_ratio)668 static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev,
669 unsigned long new_target_ratio)
670 {
671 int ret = 0;
672
673 mutex_lock(&powerclamp_lock);
674
675 new_target_ratio = clamp(new_target_ratio, 0UL,
676 (unsigned long) (max_idle - 1));
677
678 if (powerclamp_data.target_ratio == new_target_ratio)
679 goto exit_set;
680
681 if (!powerclamp_data.target_ratio && new_target_ratio > 0) {
682 pr_info("Start idle injection to reduce power\n");
683 powerclamp_data.target_ratio = new_target_ratio;
684 ret = start_power_clamp();
685 if (ret)
686 powerclamp_data.target_ratio = 0;
687 goto exit_set;
688 } else if (powerclamp_data.target_ratio > 0 && new_target_ratio == 0) {
689 pr_info("Stop forced idle injection\n");
690 end_power_clamp();
691 powerclamp_data.target_ratio = 0;
692 } else /* adjust currently running */ {
693 unsigned int runtime;
694
695 powerclamp_data.target_ratio = new_target_ratio;
696 runtime = get_run_time();
697 idle_inject_set_duration(ii_dev, runtime, duration);
698 }
699
700 exit_set:
701 mutex_unlock(&powerclamp_lock);
702
703 return ret;
704 }
705
706 /* bind to generic thermal layer as cooling device*/
707 static const struct thermal_cooling_device_ops powerclamp_cooling_ops = {
708 .get_max_state = powerclamp_get_max_state,
709 .get_cur_state = powerclamp_get_cur_state,
710 .set_cur_state = powerclamp_set_cur_state,
711 };
712
713 static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = {
714 X86_MATCH_VENDOR_FEATURE(INTEL, X86_FEATURE_MWAIT, NULL),
715 {}
716 };
717 MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
718
powerclamp_probe(void)719 static int __init powerclamp_probe(void)
720 {
721
722 if (!x86_match_cpu(intel_powerclamp_ids)) {
723 pr_err("CPU does not support MWAIT\n");
724 return -ENODEV;
725 }
726
727 /* The goal for idle time alignment is to achieve package cstate. */
728 if (!has_pkg_state_counter()) {
729 pr_info("No package C-state available\n");
730 return -ENODEV;
731 }
732
733 return 0;
734 }
735
powerclamp_debug_show(struct seq_file * m,void * unused)736 static int powerclamp_debug_show(struct seq_file *m, void *unused)
737 {
738 int i = 0;
739
740 seq_printf(m, "pct confidence steady dynamic (compensation)\n");
741 for (i = 0; i < MAX_TARGET_RATIO; i++) {
742 seq_printf(m, "%d\t%lu\t%lu\t%lu\n",
743 i,
744 cal_data[i].confidence,
745 cal_data[i].steady_comp,
746 cal_data[i].dynamic_comp);
747 }
748
749 return 0;
750 }
751
752 DEFINE_SHOW_ATTRIBUTE(powerclamp_debug);
753
powerclamp_create_debug_files(void)754 static inline void powerclamp_create_debug_files(void)
755 {
756 debug_dir = debugfs_create_dir("intel_powerclamp", NULL);
757
758 debugfs_create_file("powerclamp_calib", S_IRUGO, debug_dir, cal_data,
759 &powerclamp_debug_fops);
760 }
761
powerclamp_init(void)762 static int __init powerclamp_init(void)
763 {
764 int retval;
765
766 /* probe cpu features and ids here */
767 retval = powerclamp_probe();
768 if (retval)
769 return retval;
770
771 mutex_lock(&powerclamp_lock);
772 if (!cpumask_available(idle_injection_cpu_mask))
773 retval = allocate_copy_idle_injection_mask(cpu_present_mask);
774 mutex_unlock(&powerclamp_lock);
775
776 if (retval)
777 return retval;
778
779 /* set default limit, maybe adjusted during runtime based on feedback */
780 window_size = 2;
781
782 cooling_dev = thermal_cooling_device_register("intel_powerclamp", NULL,
783 &powerclamp_cooling_ops);
784 if (IS_ERR(cooling_dev))
785 return -ENODEV;
786
787 if (!duration)
788 duration = jiffies_to_usecs(DEFAULT_DURATION_JIFFIES);
789
790 powerclamp_create_debug_files();
791
792 return 0;
793 }
794 module_init(powerclamp_init);
795
powerclamp_exit(void)796 static void __exit powerclamp_exit(void)
797 {
798 mutex_lock(&powerclamp_lock);
799 end_power_clamp();
800 mutex_unlock(&powerclamp_lock);
801
802 thermal_cooling_device_unregister(cooling_dev);
803
804 cancel_delayed_work_sync(&poll_pkg_cstate_work);
805 debugfs_remove_recursive(debug_dir);
806
807 if (cpumask_available(idle_injection_cpu_mask))
808 free_cpumask_var(idle_injection_cpu_mask);
809 }
810 module_exit(powerclamp_exit);
811
812 MODULE_IMPORT_NS(IDLE_INJECT);
813
814 MODULE_LICENSE("GPL");
815 MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
816 MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
817 MODULE_DESCRIPTION("Package Level C-state Idle Injection for Intel CPUs");
818