xref: /linux/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
4  */
5 
6 #include <linux/clk.h>
7 #include <linux/clk-provider.h>
8 #include <linux/delay.h>
9 
10 #include "dsi_phy.h"
11 #include "dsi.xml.h"
12 #include "dsi_phy_14nm.xml.h"
13 
14 #define PHY_14NM_CKLN_IDX	4
15 
16 /*
17  * DSI PLL 14nm - clock diagram (eg: DSI0):
18  *
19  *         dsi0n1_postdiv_clk
20  *                         |
21  *                         |
22  *                 +----+  |  +----+
23  *  dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
24  *                 +----+  |  +----+
25  *                         |           dsi0n1_postdivby2_clk
26  *                         |   +----+  |
27  *                         o---| /2 |--o--|\
28  *                         |   +----+     | \   +----+
29  *                         |              |  |--| n2 |-- dsi0pll
30  *                         o--------------| /   +----+
31  *                                        |/
32  */
33 
34 #define POLL_MAX_READS			15
35 #define POLL_TIMEOUT_US			1000
36 
37 #define VCO_REF_CLK_RATE		19200000
38 #define VCO_MIN_RATE			1300000000UL
39 #define VCO_MAX_RATE			2600000000UL
40 
41 struct dsi_pll_config {
42 	u64 vco_current_rate;
43 
44 	u32 ssc_en;	/* SSC enable/disable */
45 
46 	/* fixed params */
47 	u32 plllock_cnt;
48 	u32 ssc_center;
49 	u32 ssc_adj_period;
50 	u32 ssc_spread;
51 	u32 ssc_freq;
52 
53 	/* calculated */
54 	u32 dec_start;
55 	u32 div_frac_start;
56 	u32 ssc_period;
57 	u32 ssc_step_size;
58 	u32 plllock_cmp;
59 	u32 pll_vco_div_ref;
60 	u32 pll_vco_count;
61 	u32 pll_kvco_div_ref;
62 	u32 pll_kvco_count;
63 };
64 
65 struct pll_14nm_cached_state {
66 	unsigned long vco_rate;
67 	u8 n2postdiv;
68 	u8 n1postdiv;
69 };
70 
71 struct dsi_pll_14nm {
72 	struct clk_hw clk_hw;
73 
74 	struct msm_dsi_phy *phy;
75 
76 	/* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
77 	spinlock_t postdiv_lock;
78 
79 	struct pll_14nm_cached_state cached_state;
80 
81 	struct dsi_pll_14nm *slave;
82 };
83 
84 #define to_pll_14nm(x)	container_of(x, struct dsi_pll_14nm, clk_hw)
85 
86 /*
87  * Private struct for N1/N2 post-divider clocks. These clocks are similar to
88  * the generic clk_divider class of clocks. The only difference is that it
89  * also sets the slave DSI PLL's post-dividers if in bonded DSI mode
90  */
91 struct dsi_pll_14nm_postdiv {
92 	struct clk_hw hw;
93 
94 	/* divider params */
95 	u8 shift;
96 	u8 width;
97 	u8 flags; /* same flags as used by clk_divider struct */
98 
99 	struct dsi_pll_14nm *pll;
100 };
101 
102 #define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
103 
104 /*
105  * Global list of private DSI PLL struct pointers. We need this for bonded DSI
106  * mode, where the master PLL's clk_ops needs access the slave's private data
107  */
108 static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
109 
pll_14nm_poll_for_ready(struct dsi_pll_14nm * pll_14nm,u32 nb_tries,u32 timeout_us)110 static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
111 				    u32 nb_tries, u32 timeout_us)
112 {
113 	bool pll_locked = false, pll_ready = false;
114 	void __iomem *base = pll_14nm->phy->pll_base;
115 	u32 tries, val;
116 
117 	tries = nb_tries;
118 	while (tries--) {
119 		val = readl(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
120 		pll_locked = !!(val & BIT(5));
121 
122 		if (pll_locked)
123 			break;
124 
125 		udelay(timeout_us);
126 	}
127 
128 	if (!pll_locked)
129 		goto out;
130 
131 	tries = nb_tries;
132 	while (tries--) {
133 		val = readl(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
134 		pll_ready = !!(val & BIT(0));
135 
136 		if (pll_ready)
137 			break;
138 
139 		udelay(timeout_us);
140 	}
141 
142 out:
143 	DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* ");
144 
145 	return pll_locked && pll_ready;
146 }
147 
dsi_pll_14nm_config_init(struct dsi_pll_config * pconf)148 static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)
149 {
150 	/* fixed input */
151 	pconf->plllock_cnt = 1;
152 
153 	/*
154 	 * SSC is enabled by default. We might need DT props for configuring
155 	 * some SSC params like PPM and center/down spread etc.
156 	 */
157 	pconf->ssc_en = 1;
158 	pconf->ssc_center = 0;		/* down spread by default */
159 	pconf->ssc_spread = 5;		/* PPM / 1000 */
160 	pconf->ssc_freq = 31500;	/* default recommended */
161 	pconf->ssc_adj_period = 37;
162 }
163 
164 #define CEIL(x, y)		(((x) + ((y) - 1)) / (y))
165 
pll_14nm_ssc_calc(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)166 static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
167 {
168 	u32 period, ssc_period;
169 	u32 ref, rem;
170 	u64 step_size;
171 
172 	DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE);
173 
174 	ssc_period = pconf->ssc_freq / 500;
175 	period = (u32)VCO_REF_CLK_RATE / 1000;
176 	ssc_period  = CEIL(period, ssc_period);
177 	ssc_period -= 1;
178 	pconf->ssc_period = ssc_period;
179 
180 	DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq,
181 	    pconf->ssc_spread, pconf->ssc_period);
182 
183 	step_size = (u32)pconf->vco_current_rate;
184 	ref = VCO_REF_CLK_RATE;
185 	ref /= 1000;
186 	step_size = div_u64(step_size, ref);
187 	step_size <<= 20;
188 	step_size = div_u64(step_size, 1000);
189 	step_size *= pconf->ssc_spread;
190 	step_size = div_u64(step_size, 1000);
191 	step_size *= (pconf->ssc_adj_period + 1);
192 
193 	rem = 0;
194 	step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
195 	if (rem)
196 		step_size++;
197 
198 	DBG("step_size=%lld", step_size);
199 
200 	step_size &= 0x0ffff;	/* take lower 16 bits */
201 
202 	pconf->ssc_step_size = step_size;
203 }
204 
pll_14nm_dec_frac_calc(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)205 static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
206 {
207 	u64 multiplier = BIT(20);
208 	u64 dec_start_multiple, dec_start, pll_comp_val;
209 	u32 duration, div_frac_start;
210 	u64 vco_clk_rate = pconf->vco_current_rate;
211 	u64 fref = VCO_REF_CLK_RATE;
212 
213 	DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
214 
215 	dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
216 	dec_start = div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
217 
218 	pconf->dec_start = (u32)dec_start;
219 	pconf->div_frac_start = div_frac_start;
220 
221 	if (pconf->plllock_cnt == 0)
222 		duration = 1024;
223 	else if (pconf->plllock_cnt == 1)
224 		duration = 256;
225 	else if (pconf->plllock_cnt == 2)
226 		duration = 128;
227 	else
228 		duration = 32;
229 
230 	pll_comp_val = duration * dec_start_multiple;
231 	pll_comp_val = div_u64(pll_comp_val, multiplier);
232 	do_div(pll_comp_val, 10);
233 
234 	pconf->plllock_cmp = (u32)pll_comp_val;
235 }
236 
pll_14nm_kvco_slop(u32 vrate)237 static u32 pll_14nm_kvco_slop(u32 vrate)
238 {
239 	u32 slop = 0;
240 
241 	if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
242 		slop =  600;
243 	else if (vrate > 1800000000UL && vrate < 2300000000UL)
244 		slop = 400;
245 	else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
246 		slop = 280;
247 
248 	return slop;
249 }
250 
pll_14nm_calc_vco_count(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)251 static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
252 {
253 	u64 vco_clk_rate = pconf->vco_current_rate;
254 	u64 fref = VCO_REF_CLK_RATE;
255 	u32 vco_measure_time = 5;
256 	u32 kvco_measure_time = 5;
257 	u64 data;
258 	u32 cnt;
259 
260 	data = fref * vco_measure_time;
261 	do_div(data, 1000000);
262 	data &= 0x03ff;	/* 10 bits */
263 	data -= 2;
264 	pconf->pll_vco_div_ref = data;
265 
266 	data = div_u64(vco_clk_rate, 1000000);	/* unit is Mhz */
267 	data *= vco_measure_time;
268 	do_div(data, 10);
269 	pconf->pll_vco_count = data;
270 
271 	data = fref * kvco_measure_time;
272 	do_div(data, 1000000);
273 	data &= 0x03ff;	/* 10 bits */
274 	data -= 1;
275 	pconf->pll_kvco_div_ref = data;
276 
277 	cnt = pll_14nm_kvco_slop(vco_clk_rate);
278 	cnt *= 2;
279 	cnt /= 100;
280 	cnt *= kvco_measure_time;
281 	pconf->pll_kvco_count = cnt;
282 }
283 
pll_db_commit_ssc(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)284 static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
285 {
286 	void __iomem *base = pll->phy->pll_base;
287 	u8 data;
288 
289 	data = pconf->ssc_adj_period;
290 	data &= 0x0ff;
291 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1);
292 	data = (pconf->ssc_adj_period >> 8);
293 	data &= 0x03;
294 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2);
295 
296 	data = pconf->ssc_period;
297 	data &= 0x0ff;
298 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_PER1);
299 	data = (pconf->ssc_period >> 8);
300 	data &= 0x0ff;
301 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_PER2);
302 
303 	data = pconf->ssc_step_size;
304 	data &= 0x0ff;
305 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1);
306 	data = (pconf->ssc_step_size >> 8);
307 	data &= 0x0ff;
308 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2);
309 
310 	data = (pconf->ssc_center & 0x01);
311 	data <<= 1;
312 	data |= 0x01; /* enable */
313 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER);
314 
315 	wmb();	/* make sure register committed */
316 }
317 
pll_db_commit_common(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)318 static void pll_db_commit_common(struct dsi_pll_14nm *pll,
319 				 struct dsi_pll_config *pconf)
320 {
321 	void __iomem *base = pll->phy->pll_base;
322 	u8 data;
323 
324 	/* confgiure the non frequency dependent pll registers */
325 	data = 0;
326 	writel(data, base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET);
327 
328 	writel(1, base + REG_DSI_14nm_PHY_PLL_TXCLK_EN);
329 
330 	writel(48, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL);
331 	/* bandgap_timer */
332 	writel(4 << 3, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2);
333 	/* pll_wakeup_timer */
334 	writel(5, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5);
335 
336 	data = pconf->pll_vco_div_ref & 0xff;
337 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1);
338 	data = (pconf->pll_vco_div_ref >> 8) & 0x3;
339 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2);
340 
341 	data = pconf->pll_kvco_div_ref & 0xff;
342 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1);
343 	data = (pconf->pll_kvco_div_ref >> 8) & 0x3;
344 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2);
345 
346 	writel(16, base + REG_DSI_14nm_PHY_PLL_PLL_MISC1);
347 
348 	writel(4, base + REG_DSI_14nm_PHY_PLL_IE_TRIM);
349 
350 	writel(4, base + REG_DSI_14nm_PHY_PLL_IP_TRIM);
351 
352 	writel(1 << 3 | 1, base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR);
353 
354 	writel(0 << 3 | 0, base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET);
355 
356 	writel(0 << 3 | 0, base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET);
357 
358 	writel(4 << 3 | 4, base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET);
359 
360 	writel(1 << 4 | 11, base + REG_DSI_14nm_PHY_PLL_PLL_LPF1);
361 
362 	writel(7, base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM);
363 
364 	writel(1 << 4 | 2, base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL);
365 }
366 
pll_14nm_software_reset(struct dsi_pll_14nm * pll_14nm)367 static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
368 {
369 	void __iomem *cmn_base = pll_14nm->phy->base;
370 
371 	/* de assert pll start and apply pll sw reset */
372 
373 	/* stop pll */
374 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
375 
376 	/* pll sw reset */
377 	writel(0x20, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1);
378 	udelay(10);
379 	wmb();	/* make sure register committed */
380 
381 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1);
382 	wmb();	/* make sure register committed */
383 }
384 
pll_db_commit_14nm(struct dsi_pll_14nm * pll,struct dsi_pll_config * pconf)385 static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
386 			       struct dsi_pll_config *pconf)
387 {
388 	void __iomem *base = pll->phy->pll_base;
389 	void __iomem *cmn_base = pll->phy->base;
390 	u8 data;
391 
392 	DBG("DSI%d PLL", pll->phy->id);
393 
394 	writel(0x3c, cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL);
395 
396 	pll_db_commit_common(pll, pconf);
397 
398 	pll_14nm_software_reset(pll);
399 
400 	/* Use the /2 path in Mux */
401 	writel(1, cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1);
402 
403 	data = 0xff; /* data, clk, pll normal operation */
404 	writel(data, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0);
405 
406 	/* configure the frequency dependent pll registers */
407 	data = pconf->dec_start;
408 	writel(data, base + REG_DSI_14nm_PHY_PLL_DEC_START);
409 
410 	data = pconf->div_frac_start & 0xff;
411 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1);
412 	data = (pconf->div_frac_start >> 8) & 0xff;
413 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2);
414 	data = (pconf->div_frac_start >> 16) & 0xf;
415 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3);
416 
417 	data = pconf->plllock_cmp & 0xff;
418 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1);
419 
420 	data = (pconf->plllock_cmp >> 8) & 0xff;
421 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2);
422 
423 	data = (pconf->plllock_cmp >> 16) & 0x3;
424 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3);
425 
426 	data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */
427 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN);
428 
429 	data = pconf->pll_vco_count & 0xff;
430 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1);
431 	data = (pconf->pll_vco_count >> 8) & 0xff;
432 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2);
433 
434 	data = pconf->pll_kvco_count & 0xff;
435 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1);
436 	data = (pconf->pll_kvco_count >> 8) & 0x3;
437 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2);
438 
439 	/*
440 	 * High nibble configures the post divider internal to the VCO. It's
441 	 * fixed to divide by 1 for now.
442 	 *
443 	 * 0: divided by 1
444 	 * 1: divided by 2
445 	 * 2: divided by 4
446 	 * 3: divided by 8
447 	 */
448 	writel(0 << 4 | 3, base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV);
449 
450 	if (pconf->ssc_en)
451 		pll_db_commit_ssc(pll, pconf);
452 
453 	wmb();	/* make sure register committed */
454 }
455 
456 /*
457  * VCO clock Callbacks
458  */
dsi_pll_14nm_vco_set_rate(struct clk_hw * hw,unsigned long rate,unsigned long parent_rate)459 static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
460 				     unsigned long parent_rate)
461 {
462 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
463 	struct dsi_pll_config conf;
464 
465 	DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate,
466 	    parent_rate);
467 
468 	dsi_pll_14nm_config_init(&conf);
469 	conf.vco_current_rate = rate;
470 
471 	pll_14nm_dec_frac_calc(pll_14nm, &conf);
472 
473 	if (conf.ssc_en)
474 		pll_14nm_ssc_calc(pll_14nm, &conf);
475 
476 	pll_14nm_calc_vco_count(pll_14nm, &conf);
477 
478 	/* commit the slave DSI PLL registers if we're master. Note that we
479 	 * don't lock the slave PLL. We just ensure that the PLL/PHY registers
480 	 * of the master and slave are identical
481 	 */
482 	if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
483 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
484 
485 		pll_db_commit_14nm(pll_14nm_slave, &conf);
486 	}
487 
488 	pll_db_commit_14nm(pll_14nm, &conf);
489 
490 	return 0;
491 }
492 
dsi_pll_14nm_vco_recalc_rate(struct clk_hw * hw,unsigned long parent_rate)493 static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
494 						  unsigned long parent_rate)
495 {
496 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
497 	void __iomem *base = pll_14nm->phy->pll_base;
498 	u64 vco_rate, multiplier = BIT(20);
499 	u32 div_frac_start;
500 	u32 dec_start;
501 	u64 ref_clk = parent_rate;
502 
503 	dec_start = readl(base + REG_DSI_14nm_PHY_PLL_DEC_START);
504 	dec_start &= 0x0ff;
505 
506 	DBG("dec_start = %x", dec_start);
507 
508 	div_frac_start = (readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
509 				& 0xf) << 16;
510 	div_frac_start |= (readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
511 				& 0xff) << 8;
512 	div_frac_start |= readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
513 				& 0xff;
514 
515 	DBG("div_frac_start = %x", div_frac_start);
516 
517 	vco_rate = ref_clk * dec_start;
518 
519 	vco_rate += ((ref_clk * div_frac_start) / multiplier);
520 
521 	/*
522 	 * Recalculating the rate from dec_start and frac_start doesn't end up
523 	 * the rate we originally set. Convert the freq to KHz, round it up and
524 	 * convert it back to MHz.
525 	 */
526 	vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
527 
528 	DBG("returning vco rate = %lu", (unsigned long)vco_rate);
529 
530 	return (unsigned long)vco_rate;
531 }
532 
dsi_pll_14nm_vco_prepare(struct clk_hw * hw)533 static int dsi_pll_14nm_vco_prepare(struct clk_hw *hw)
534 {
535 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
536 	void __iomem *base = pll_14nm->phy->pll_base;
537 	void __iomem *cmn_base = pll_14nm->phy->base;
538 	bool locked;
539 
540 	DBG("");
541 
542 	if (unlikely(pll_14nm->phy->pll_on))
543 		return 0;
544 
545 	if (dsi_pll_14nm_vco_recalc_rate(hw, VCO_REF_CLK_RATE) == 0)
546 		dsi_pll_14nm_vco_set_rate(hw, pll_14nm->phy->cfg->min_pll_rate, VCO_REF_CLK_RATE);
547 
548 	writel(0x10, base + REG_DSI_14nm_PHY_PLL_VREF_CFG1);
549 	writel(1, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
550 
551 	locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
552 					 POLL_TIMEOUT_US);
553 
554 	if (unlikely(!locked)) {
555 		DRM_DEV_ERROR(&pll_14nm->phy->pdev->dev, "DSI PLL lock failed\n");
556 		return -EINVAL;
557 	}
558 
559 	DBG("DSI PLL lock success");
560 	pll_14nm->phy->pll_on = true;
561 
562 	return 0;
563 }
564 
dsi_pll_14nm_vco_unprepare(struct clk_hw * hw)565 static void dsi_pll_14nm_vco_unprepare(struct clk_hw *hw)
566 {
567 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
568 	void __iomem *cmn_base = pll_14nm->phy->base;
569 
570 	DBG("");
571 
572 	if (unlikely(!pll_14nm->phy->pll_on))
573 		return;
574 
575 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
576 
577 	pll_14nm->phy->pll_on = false;
578 }
579 
dsi_pll_14nm_clk_round_rate(struct clk_hw * hw,unsigned long rate,unsigned long * parent_rate)580 static long dsi_pll_14nm_clk_round_rate(struct clk_hw *hw,
581 		unsigned long rate, unsigned long *parent_rate)
582 {
583 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
584 
585 	if      (rate < pll_14nm->phy->cfg->min_pll_rate)
586 		return  pll_14nm->phy->cfg->min_pll_rate;
587 	else if (rate > pll_14nm->phy->cfg->max_pll_rate)
588 		return  pll_14nm->phy->cfg->max_pll_rate;
589 	else
590 		return rate;
591 }
592 
593 static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
594 	.round_rate = dsi_pll_14nm_clk_round_rate,
595 	.set_rate = dsi_pll_14nm_vco_set_rate,
596 	.recalc_rate = dsi_pll_14nm_vco_recalc_rate,
597 	.prepare = dsi_pll_14nm_vco_prepare,
598 	.unprepare = dsi_pll_14nm_vco_unprepare,
599 };
600 
601 /*
602  * N1 and N2 post-divider clock callbacks
603  */
604 #define div_mask(width)	((1 << (width)) - 1)
dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw * hw,unsigned long parent_rate)605 static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
606 						      unsigned long parent_rate)
607 {
608 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
609 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
610 	void __iomem *base = pll_14nm->phy->base;
611 	u8 shift = postdiv->shift;
612 	u8 width = postdiv->width;
613 	u32 val;
614 
615 	DBG("DSI%d PLL parent rate=%lu", pll_14nm->phy->id, parent_rate);
616 
617 	val = readl(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
618 	val &= div_mask(width);
619 
620 	return divider_recalc_rate(hw, parent_rate, val, NULL,
621 				   postdiv->flags, width);
622 }
623 
dsi_pll_14nm_postdiv_round_rate(struct clk_hw * hw,unsigned long rate,unsigned long * prate)624 static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
625 					    unsigned long rate,
626 					    unsigned long *prate)
627 {
628 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
629 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
630 
631 	DBG("DSI%d PLL parent rate=%lu", pll_14nm->phy->id, rate);
632 
633 	return divider_round_rate(hw, rate, prate, NULL,
634 				  postdiv->width,
635 				  postdiv->flags);
636 }
637 
dsi_pll_14nm_postdiv_set_rate(struct clk_hw * hw,unsigned long rate,unsigned long parent_rate)638 static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
639 					 unsigned long parent_rate)
640 {
641 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
642 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
643 	void __iomem *base = pll_14nm->phy->base;
644 	spinlock_t *lock = &pll_14nm->postdiv_lock;
645 	u8 shift = postdiv->shift;
646 	u8 width = postdiv->width;
647 	unsigned int value;
648 	unsigned long flags = 0;
649 	u32 val;
650 
651 	DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->phy->id, rate,
652 	    parent_rate);
653 
654 	value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
655 				postdiv->flags);
656 
657 	spin_lock_irqsave(lock, flags);
658 
659 	val = readl(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
660 	val &= ~(div_mask(width) << shift);
661 
662 	val |= value << shift;
663 	writel(val, base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
664 
665 	/* If we're master in bonded DSI mode, then the slave PLL's post-dividers
666 	 * follow the master's post dividers
667 	 */
668 	if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
669 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
670 		void __iomem *slave_base = pll_14nm_slave->phy->base;
671 
672 		writel(val, slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
673 	}
674 
675 	spin_unlock_irqrestore(lock, flags);
676 
677 	return 0;
678 }
679 
680 static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
681 	.recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
682 	.round_rate = dsi_pll_14nm_postdiv_round_rate,
683 	.set_rate = dsi_pll_14nm_postdiv_set_rate,
684 };
685 
686 /*
687  * PLL Callbacks
688  */
689 
dsi_14nm_pll_save_state(struct msm_dsi_phy * phy)690 static void dsi_14nm_pll_save_state(struct msm_dsi_phy *phy)
691 {
692 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
693 	struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
694 	void __iomem *cmn_base = pll_14nm->phy->base;
695 	u32 data;
696 
697 	data = readl(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
698 
699 	cached_state->n1postdiv = data & 0xf;
700 	cached_state->n2postdiv = (data >> 4) & 0xf;
701 
702 	DBG("DSI%d PLL save state %x %x", pll_14nm->phy->id,
703 	    cached_state->n1postdiv, cached_state->n2postdiv);
704 
705 	cached_state->vco_rate = clk_hw_get_rate(phy->vco_hw);
706 }
707 
dsi_14nm_pll_restore_state(struct msm_dsi_phy * phy)708 static int dsi_14nm_pll_restore_state(struct msm_dsi_phy *phy)
709 {
710 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
711 	struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
712 	void __iomem *cmn_base = pll_14nm->phy->base;
713 	u32 data;
714 	int ret;
715 
716 	ret = dsi_pll_14nm_vco_set_rate(phy->vco_hw,
717 					cached_state->vco_rate, 0);
718 	if (ret) {
719 		DRM_DEV_ERROR(&pll_14nm->phy->pdev->dev,
720 			      "restore vco rate failed. ret=%d\n", ret);
721 		return ret;
722 	}
723 
724 	data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
725 
726 	DBG("DSI%d PLL restore state %x %x", pll_14nm->phy->id,
727 	    cached_state->n1postdiv, cached_state->n2postdiv);
728 
729 	writel(data, cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
730 
731 	/* also restore post-dividers for slave DSI PLL */
732 	if (phy->usecase == MSM_DSI_PHY_MASTER) {
733 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
734 		void __iomem *slave_base = pll_14nm_slave->phy->base;
735 
736 		writel(data, slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
737 	}
738 
739 	return 0;
740 }
741 
dsi_14nm_set_usecase(struct msm_dsi_phy * phy)742 static int dsi_14nm_set_usecase(struct msm_dsi_phy *phy)
743 {
744 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
745 	void __iomem *base = phy->pll_base;
746 	u32 clkbuflr_en, bandgap = 0;
747 
748 	switch (phy->usecase) {
749 	case MSM_DSI_PHY_STANDALONE:
750 		clkbuflr_en = 0x1;
751 		break;
752 	case MSM_DSI_PHY_MASTER:
753 		clkbuflr_en = 0x3;
754 		pll_14nm->slave = pll_14nm_list[(pll_14nm->phy->id + 1) % DSI_MAX];
755 		break;
756 	case MSM_DSI_PHY_SLAVE:
757 		clkbuflr_en = 0x0;
758 		bandgap = 0x3;
759 		break;
760 	default:
761 		return -EINVAL;
762 	}
763 
764 	writel(clkbuflr_en, base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN);
765 	if (bandgap)
766 		writel(bandgap, base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP);
767 
768 	return 0;
769 }
770 
pll_14nm_postdiv_register(struct dsi_pll_14nm * pll_14nm,const char * name,const struct clk_hw * parent_hw,unsigned long flags,u8 shift)771 static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
772 						const char *name,
773 						const struct clk_hw *parent_hw,
774 						unsigned long flags,
775 						u8 shift)
776 {
777 	struct dsi_pll_14nm_postdiv *pll_postdiv;
778 	struct device *dev = &pll_14nm->phy->pdev->dev;
779 	struct clk_init_data postdiv_init = {
780 		.parent_hws = (const struct clk_hw *[]) { parent_hw },
781 		.num_parents = 1,
782 		.name = name,
783 		.flags = flags,
784 		.ops = &clk_ops_dsi_pll_14nm_postdiv,
785 	};
786 	int ret;
787 
788 	pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
789 	if (!pll_postdiv)
790 		return ERR_PTR(-ENOMEM);
791 
792 	pll_postdiv->pll = pll_14nm;
793 	pll_postdiv->shift = shift;
794 	/* both N1 and N2 postdividers are 4 bits wide */
795 	pll_postdiv->width = 4;
796 	/* range of each divider is from 1 to 15 */
797 	pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
798 	pll_postdiv->hw.init = &postdiv_init;
799 
800 	ret = devm_clk_hw_register(dev, &pll_postdiv->hw);
801 	if (ret)
802 		return ERR_PTR(ret);
803 
804 	return &pll_postdiv->hw;
805 }
806 
pll_14nm_register(struct dsi_pll_14nm * pll_14nm,struct clk_hw ** provided_clocks)807 static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm, struct clk_hw **provided_clocks)
808 {
809 	char clk_name[32];
810 	struct clk_init_data vco_init = {
811 		.parent_data = &(const struct clk_parent_data) {
812 			.fw_name = "ref",
813 		},
814 		.num_parents = 1,
815 		.name = clk_name,
816 		.flags = CLK_IGNORE_UNUSED,
817 		.ops = &clk_ops_dsi_pll_14nm_vco,
818 	};
819 	struct device *dev = &pll_14nm->phy->pdev->dev;
820 	struct clk_hw *hw, *n1_postdiv, *n1_postdivby2;
821 	int ret;
822 
823 	DBG("DSI%d", pll_14nm->phy->id);
824 
825 	snprintf(clk_name, sizeof(clk_name), "dsi%dvco_clk", pll_14nm->phy->id);
826 	pll_14nm->clk_hw.init = &vco_init;
827 
828 	ret = devm_clk_hw_register(dev, &pll_14nm->clk_hw);
829 	if (ret)
830 		return ret;
831 
832 	snprintf(clk_name, sizeof(clk_name), "dsi%dn1_postdiv_clk", pll_14nm->phy->id);
833 
834 	/* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
835 	n1_postdiv = pll_14nm_postdiv_register(pll_14nm, clk_name,
836 			&pll_14nm->clk_hw, CLK_SET_RATE_PARENT, 0);
837 	if (IS_ERR(n1_postdiv))
838 		return PTR_ERR(n1_postdiv);
839 
840 	snprintf(clk_name, sizeof(clk_name), "dsi%dpllbyte", pll_14nm->phy->id);
841 
842 	/* DSI Byte clock = VCO_CLK / N1 / 8 */
843 	hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, clk_name,
844 			n1_postdiv, CLK_SET_RATE_PARENT, 1, 8);
845 	if (IS_ERR(hw))
846 		return PTR_ERR(hw);
847 
848 	provided_clocks[DSI_BYTE_PLL_CLK] = hw;
849 
850 	snprintf(clk_name, sizeof(clk_name), "dsi%dn1_postdivby2_clk", pll_14nm->phy->id);
851 
852 	/*
853 	 * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
854 	 * on the way. Don't let it set parent.
855 	 */
856 	n1_postdivby2 = devm_clk_hw_register_fixed_factor_parent_hw(dev,
857 			clk_name, n1_postdiv, 0, 1, 2);
858 	if (IS_ERR(n1_postdivby2))
859 		return PTR_ERR(n1_postdivby2);
860 
861 	snprintf(clk_name, sizeof(clk_name), "dsi%dpll", pll_14nm->phy->id);
862 
863 	/* DSI pixel clock = VCO_CLK / N1 / 2 / N2
864 	 * This is the output of N2 post-divider, bits 4-7 in
865 	 * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
866 	 */
867 	hw = pll_14nm_postdiv_register(pll_14nm, clk_name, n1_postdivby2,
868 			0, 4);
869 	if (IS_ERR(hw))
870 		return PTR_ERR(hw);
871 
872 	provided_clocks[DSI_PIXEL_PLL_CLK] = hw;
873 
874 	return 0;
875 }
876 
dsi_pll_14nm_init(struct msm_dsi_phy * phy)877 static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
878 {
879 	struct platform_device *pdev = phy->pdev;
880 	struct dsi_pll_14nm *pll_14nm;
881 	int ret;
882 
883 	if (!pdev)
884 		return -ENODEV;
885 
886 	pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
887 	if (!pll_14nm)
888 		return -ENOMEM;
889 
890 	DBG("PLL%d", phy->id);
891 
892 	pll_14nm_list[phy->id] = pll_14nm;
893 
894 	spin_lock_init(&pll_14nm->postdiv_lock);
895 
896 	pll_14nm->phy = phy;
897 
898 	ret = pll_14nm_register(pll_14nm, phy->provided_clocks->hws);
899 	if (ret) {
900 		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
901 		return ret;
902 	}
903 
904 	phy->vco_hw = &pll_14nm->clk_hw;
905 
906 	return 0;
907 }
908 
dsi_14nm_dphy_set_timing(struct msm_dsi_phy * phy,struct msm_dsi_dphy_timing * timing,int lane_idx)909 static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
910 				     struct msm_dsi_dphy_timing *timing,
911 				     int lane_idx)
912 {
913 	void __iomem *base = phy->lane_base;
914 	bool clk_ln = (lane_idx == PHY_14NM_CKLN_IDX);
915 	u32 zero = clk_ln ? timing->clk_zero : timing->hs_zero;
916 	u32 prepare = clk_ln ? timing->clk_prepare : timing->hs_prepare;
917 	u32 trail = clk_ln ? timing->clk_trail : timing->hs_trail;
918 	u32 rqst = clk_ln ? timing->hs_rqst_ckln : timing->hs_rqst;
919 	u32 prep_dly = clk_ln ? timing->hs_prep_dly_ckln : timing->hs_prep_dly;
920 	u32 halfbyte_en = clk_ln ? timing->hs_halfbyte_en_ckln :
921 				   timing->hs_halfbyte_en;
922 
923 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_4_HS_EXIT(timing->hs_exit),
924 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_4(lane_idx));
925 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_5_HS_ZERO(zero),
926 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_5(lane_idx));
927 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_6_HS_PREPARE(prepare),
928 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_6(lane_idx));
929 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_7_HS_TRAIL(trail),
930 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_7(lane_idx));
931 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_8_HS_RQST(rqst),
932 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_8(lane_idx));
933 	writel(DSI_14nm_PHY_LN_CFG0_PREPARE_DLY(prep_dly),
934 	       base + REG_DSI_14nm_PHY_LN_CFG0(lane_idx));
935 	writel(halfbyte_en ? DSI_14nm_PHY_LN_CFG1_HALFBYTECLK_EN : 0,
936 	       base + REG_DSI_14nm_PHY_LN_CFG1(lane_idx));
937 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_GO(timing->ta_go) |
938 	       DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_SURE(timing->ta_sure),
939 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_9(lane_idx));
940 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_10_TA_GET(timing->ta_get),
941 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_10(lane_idx));
942 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_11_TRIG3_CMD(0xa0),
943 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_11(lane_idx));
944 }
945 
dsi_14nm_phy_enable(struct msm_dsi_phy * phy,struct msm_dsi_phy_clk_request * clk_req)946 static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy,
947 			       struct msm_dsi_phy_clk_request *clk_req)
948 {
949 	struct msm_dsi_dphy_timing *timing = &phy->timing;
950 	u32 data;
951 	int i;
952 	int ret;
953 	void __iomem *base = phy->base;
954 	void __iomem *lane_base = phy->lane_base;
955 	u32 glbl_test_ctrl;
956 
957 	if (msm_dsi_dphy_timing_calc_v2(timing, clk_req)) {
958 		DRM_DEV_ERROR(&phy->pdev->dev,
959 			      "%s: D-PHY timing calculation failed\n",
960 			      __func__);
961 		return -EINVAL;
962 	}
963 
964 	data = 0x1c;
965 	if (phy->usecase != MSM_DSI_PHY_STANDALONE)
966 		data |= DSI_14nm_PHY_CMN_LDO_CNTRL_VREG_CTRL(32);
967 	writel(data, base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL);
968 
969 	writel(0x1, base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
970 
971 	/* 4 data lanes + 1 clk lane configuration */
972 	for (i = 0; i < 5; i++) {
973 		writel(0x1d, lane_base + REG_DSI_14nm_PHY_LN_VREG_CNTRL(i));
974 
975 		writel(0xff, lane_base + REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_0(i));
976 		writel(i == PHY_14NM_CKLN_IDX ? 0x00 : 0x06,
977 		       lane_base + REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_1(i));
978 
979 		writel(i == PHY_14NM_CKLN_IDX ? 0x8f : 0x0f,
980 		       lane_base + REG_DSI_14nm_PHY_LN_CFG3(i));
981 		writel(0x10, lane_base + REG_DSI_14nm_PHY_LN_CFG2(i));
982 		writel(0, lane_base + REG_DSI_14nm_PHY_LN_TEST_DATAPATH(i));
983 		writel(0x88, lane_base + REG_DSI_14nm_PHY_LN_TEST_STR(i));
984 
985 		dsi_14nm_dphy_set_timing(phy, timing, i);
986 	}
987 
988 	/* Make sure PLL is not start */
989 	writel(0x00, base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
990 
991 	wmb(); /* make sure everything is written before reset and enable */
992 
993 	/* reset digital block */
994 	writel(0x80, base + REG_DSI_14nm_PHY_CMN_CTRL_1);
995 	wmb(); /* ensure reset is asserted */
996 	udelay(100);
997 	writel(0x00, base + REG_DSI_14nm_PHY_CMN_CTRL_1);
998 
999 	glbl_test_ctrl = readl(base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
1000 	if (phy->id == DSI_1 && phy->usecase == MSM_DSI_PHY_SLAVE)
1001 		glbl_test_ctrl |= DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
1002 	else
1003 		glbl_test_ctrl &= ~DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
1004 	writel(glbl_test_ctrl, base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
1005 	ret = dsi_14nm_set_usecase(phy);
1006 	if (ret) {
1007 		DRM_DEV_ERROR(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
1008 			      __func__, ret);
1009 		return ret;
1010 	}
1011 
1012 	/* Remove power down from PLL and all lanes */
1013 	writel(0xff, base + REG_DSI_14nm_PHY_CMN_CTRL_0);
1014 
1015 	return 0;
1016 }
1017 
dsi_14nm_phy_disable(struct msm_dsi_phy * phy)1018 static void dsi_14nm_phy_disable(struct msm_dsi_phy *phy)
1019 {
1020 	writel(0, phy->base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
1021 	writel(0, phy->base + REG_DSI_14nm_PHY_CMN_CTRL_0);
1022 
1023 	/* ensure that the phy is completely disabled */
1024 	wmb();
1025 }
1026 
1027 static const struct regulator_bulk_data dsi_phy_14nm_17mA_regulators[] = {
1028 	{ .supply = "vcca", .init_load_uA = 17000 },
1029 };
1030 
1031 static const struct regulator_bulk_data dsi_phy_14nm_73p4mA_regulators[] = {
1032 	{ .supply = "vcca", .init_load_uA = 73400 },
1033 };
1034 
1035 const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
1036 	.has_phy_lane = true,
1037 	.regulator_data = dsi_phy_14nm_17mA_regulators,
1038 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
1039 	.ops = {
1040 		.enable = dsi_14nm_phy_enable,
1041 		.disable = dsi_14nm_phy_disable,
1042 		.pll_init = dsi_pll_14nm_init,
1043 		.save_pll_state = dsi_14nm_pll_save_state,
1044 		.restore_pll_state = dsi_14nm_pll_restore_state,
1045 	},
1046 	.min_pll_rate = VCO_MIN_RATE,
1047 	.max_pll_rate = VCO_MAX_RATE,
1048 	.io_start = { 0x994400, 0x996400 },
1049 	.num_dsi_phy = 2,
1050 };
1051 
1052 const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
1053 	.has_phy_lane = true,
1054 	.regulator_data = dsi_phy_14nm_73p4mA_regulators,
1055 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_73p4mA_regulators),
1056 	.ops = {
1057 		.enable = dsi_14nm_phy_enable,
1058 		.disable = dsi_14nm_phy_disable,
1059 		.pll_init = dsi_pll_14nm_init,
1060 		.save_pll_state = dsi_14nm_pll_save_state,
1061 		.restore_pll_state = dsi_14nm_pll_restore_state,
1062 	},
1063 	.min_pll_rate = VCO_MIN_RATE,
1064 	.max_pll_rate = VCO_MAX_RATE,
1065 	.io_start = { 0xc994400, 0xc996400 },
1066 	.num_dsi_phy = 2,
1067 };
1068 
1069 const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
1070 	.has_phy_lane = true,
1071 	.regulator_data = dsi_phy_14nm_17mA_regulators,
1072 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
1073 	.ops = {
1074 		.enable = dsi_14nm_phy_enable,
1075 		.disable = dsi_14nm_phy_disable,
1076 		.pll_init = dsi_pll_14nm_init,
1077 		.save_pll_state = dsi_14nm_pll_save_state,
1078 		.restore_pll_state = dsi_14nm_pll_restore_state,
1079 	},
1080 	.min_pll_rate = VCO_MIN_RATE,
1081 	.max_pll_rate = VCO_MAX_RATE,
1082 	.io_start = { 0x1a94400, 0x1a96400 },
1083 	.num_dsi_phy = 2,
1084 };
1085 
1086 const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
1087 	.has_phy_lane = true,
1088 	.ops = {
1089 		.enable = dsi_14nm_phy_enable,
1090 		.disable = dsi_14nm_phy_disable,
1091 		.pll_init = dsi_pll_14nm_init,
1092 		.save_pll_state = dsi_14nm_pll_save_state,
1093 		.restore_pll_state = dsi_14nm_pll_restore_state,
1094 	},
1095 	.min_pll_rate = VCO_MIN_RATE,
1096 	.max_pll_rate = VCO_MAX_RATE,
1097 	.io_start = { 0x5e94400 },
1098 	.num_dsi_phy = 1,
1099 };
1100