1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
4 *
5 * Parts of this file were based on sources as follows:
6 *
7 * Copyright (c) 2006-2008 Intel Corporation
8 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
9 * Copyright (C) 2011 Texas Instruments
10 */
11
12 #include <linux/clk.h>
13 #include <linux/delay.h>
14 #include <linux/dma-buf.h>
15 #include <linux/media-bus-format.h>
16 #include <linux/of_graph.h>
17
18 #include <drm/drm_fb_dma_helper.h>
19 #include <drm/drm_fourcc.h>
20 #include <drm/drm_framebuffer.h>
21 #include <drm/drm_gem_atomic_helper.h>
22 #include <drm/drm_gem_dma_helper.h>
23 #include <drm/drm_vblank.h>
24
25 #include "pl111_drm.h"
26
pl111_irq(int irq,void * data)27 irqreturn_t pl111_irq(int irq, void *data)
28 {
29 struct pl111_drm_dev_private *priv = data;
30 u32 irq_stat;
31 irqreturn_t status = IRQ_NONE;
32
33 irq_stat = readl(priv->regs + CLCD_PL111_MIS);
34
35 if (!irq_stat)
36 return IRQ_NONE;
37
38 if (irq_stat & CLCD_IRQ_NEXTBASE_UPDATE) {
39 drm_crtc_handle_vblank(&priv->pipe.crtc);
40
41 status = IRQ_HANDLED;
42 }
43
44 /* Clear the interrupt once done */
45 writel(irq_stat, priv->regs + CLCD_PL111_ICR);
46
47 return status;
48 }
49
50 static enum drm_mode_status
pl111_mode_valid(struct drm_simple_display_pipe * pipe,const struct drm_display_mode * mode)51 pl111_mode_valid(struct drm_simple_display_pipe *pipe,
52 const struct drm_display_mode *mode)
53 {
54 struct drm_device *drm = pipe->crtc.dev;
55 struct pl111_drm_dev_private *priv = drm->dev_private;
56 u32 cpp = DIV_ROUND_UP(priv->variant->fb_depth, 8);
57 u64 bw;
58
59 /*
60 * We use the pixelclock to also account for interlaced modes, the
61 * resulting bandwidth is in bytes per second.
62 */
63 bw = mode->clock * 1000ULL; /* In Hz */
64 bw = bw * mode->hdisplay * mode->vdisplay * cpp;
65 bw = div_u64(bw, mode->htotal * mode->vtotal);
66
67 /*
68 * If no bandwidth constraints, anything goes, else
69 * check if we are too fast.
70 */
71 if (priv->memory_bw && (bw > priv->memory_bw)) {
72 DRM_DEBUG_KMS("%d x %d @ %d Hz, %d cpp, bw %llu too fast\n",
73 mode->hdisplay, mode->vdisplay,
74 mode->clock * 1000, cpp, bw);
75
76 return MODE_BAD;
77 }
78 DRM_DEBUG_KMS("%d x %d @ %d Hz, %d cpp, bw %llu bytes/s OK\n",
79 mode->hdisplay, mode->vdisplay,
80 mode->clock * 1000, cpp, bw);
81
82 return MODE_OK;
83 }
84
pl111_display_check(struct drm_simple_display_pipe * pipe,struct drm_plane_state * pstate,struct drm_crtc_state * cstate)85 static int pl111_display_check(struct drm_simple_display_pipe *pipe,
86 struct drm_plane_state *pstate,
87 struct drm_crtc_state *cstate)
88 {
89 const struct drm_display_mode *mode = &cstate->mode;
90 struct drm_framebuffer *old_fb = pipe->plane.state->fb;
91 struct drm_framebuffer *fb = pstate->fb;
92
93 if (mode->hdisplay % 16)
94 return -EINVAL;
95
96 if (fb) {
97 u32 offset = drm_fb_dma_get_gem_addr(fb, pstate, 0);
98
99 /* FB base address must be dword aligned. */
100 if (offset & 3)
101 return -EINVAL;
102
103 /* There's no pitch register -- the mode's hdisplay
104 * controls it.
105 */
106 if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0])
107 return -EINVAL;
108
109 /* We can't change the FB format in a flicker-free
110 * manner (and only update it during CRTC enable).
111 */
112 if (old_fb && old_fb->format != fb->format)
113 cstate->mode_changed = true;
114 }
115
116 return 0;
117 }
118
pl111_display_enable(struct drm_simple_display_pipe * pipe,struct drm_crtc_state * cstate,struct drm_plane_state * plane_state)119 static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
120 struct drm_crtc_state *cstate,
121 struct drm_plane_state *plane_state)
122 {
123 struct drm_crtc *crtc = &pipe->crtc;
124 struct drm_plane *plane = &pipe->plane;
125 struct drm_device *drm = crtc->dev;
126 struct pl111_drm_dev_private *priv = drm->dev_private;
127 const struct drm_display_mode *mode = &cstate->mode;
128 struct drm_framebuffer *fb = plane->state->fb;
129 struct drm_connector *connector = priv->connector;
130 struct drm_bridge *bridge = priv->bridge;
131 bool grayscale = false;
132 u32 cntl;
133 u32 ppl, hsw, hfp, hbp;
134 u32 lpp, vsw, vfp, vbp;
135 u32 cpl, tim2;
136 int ret;
137
138 ret = clk_set_rate(priv->clk, mode->clock * 1000);
139 if (ret) {
140 dev_err(drm->dev,
141 "Failed to set pixel clock rate to %d: %d\n",
142 mode->clock * 1000, ret);
143 }
144
145 clk_prepare_enable(priv->clk);
146
147 ppl = (mode->hdisplay / 16) - 1;
148 hsw = mode->hsync_end - mode->hsync_start - 1;
149 hfp = mode->hsync_start - mode->hdisplay - 1;
150 hbp = mode->htotal - mode->hsync_end - 1;
151
152 lpp = mode->vdisplay - 1;
153 vsw = mode->vsync_end - mode->vsync_start - 1;
154 vfp = mode->vsync_start - mode->vdisplay;
155 vbp = mode->vtotal - mode->vsync_end;
156
157 cpl = mode->hdisplay - 1;
158
159 writel((ppl << 2) |
160 (hsw << 8) |
161 (hfp << 16) |
162 (hbp << 24),
163 priv->regs + CLCD_TIM0);
164 writel(lpp |
165 (vsw << 10) |
166 (vfp << 16) |
167 (vbp << 24),
168 priv->regs + CLCD_TIM1);
169
170 spin_lock(&priv->tim2_lock);
171
172 tim2 = readl(priv->regs + CLCD_TIM2);
173 tim2 &= (TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK);
174
175 if (priv->variant->broken_clockdivider)
176 tim2 |= TIM2_BCD;
177
178 if (mode->flags & DRM_MODE_FLAG_NHSYNC)
179 tim2 |= TIM2_IHS;
180
181 if (mode->flags & DRM_MODE_FLAG_NVSYNC)
182 tim2 |= TIM2_IVS;
183
184 if (connector) {
185 if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW)
186 tim2 |= TIM2_IOE;
187
188 if (connector->display_info.bus_flags &
189 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
190 tim2 |= TIM2_IPC;
191
192 if (connector->display_info.num_bus_formats == 1 &&
193 connector->display_info.bus_formats[0] ==
194 MEDIA_BUS_FMT_Y8_1X8)
195 grayscale = true;
196
197 /*
198 * The AC pin bias frequency is set to max count when using
199 * grayscale so at least once in a while we will reverse
200 * polarity and get rid of any DC built up that could
201 * damage the display.
202 */
203 if (grayscale)
204 tim2 |= TIM2_ACB_MASK;
205 }
206
207 if (bridge) {
208 const struct drm_bridge_timings *btimings = bridge->timings;
209
210 /*
211 * Here is when things get really fun. Sometimes the bridge
212 * timings are such that the signal out from PL11x is not
213 * stable before the receiving bridge (such as a dumb VGA DAC
214 * or similar) samples it. If that happens, we compensate by
215 * the only method we have: output the data on the opposite
216 * edge of the clock so it is for sure stable when it gets
217 * sampled.
218 *
219 * The PL111 manual does not contain proper timining diagrams
220 * or data for these details, but we know from experiments
221 * that the setup time is more than 3000 picoseconds (3 ns).
222 * If we have a bridge that requires the signal to be stable
223 * earlier than 3000 ps before the clock pulse, we have to
224 * output the data on the opposite edge to avoid flicker.
225 */
226 if (btimings && btimings->setup_time_ps >= 3000)
227 tim2 ^= TIM2_IPC;
228 }
229
230 tim2 |= cpl << 16;
231 writel(tim2, priv->regs + CLCD_TIM2);
232 spin_unlock(&priv->tim2_lock);
233
234 writel(0, priv->regs + CLCD_TIM3);
235
236 /*
237 * Detect grayscale bus format. We do not support a grayscale mode
238 * toward userspace, instead we expose an RGB24 buffer and then the
239 * hardware will activate its grayscaler to convert to the grayscale
240 * format.
241 */
242 if (grayscale)
243 cntl = CNTL_LCDEN | CNTL_LCDMONO8;
244 else
245 /* Else we assume TFT display */
246 cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDVCOMP(1);
247
248 /* On the ST Micro variant, assume all 24 bits are connected */
249 if (priv->variant->st_bitmux_control)
250 cntl |= CNTL_ST_CDWID_24;
251
252 /*
253 * Note that the ARM hardware's format reader takes 'r' from
254 * the low bit, while DRM formats list channels from high bit
255 * to low bit as you read left to right. The ST Micro version of
256 * the PL110 (LCDC) however uses the standard DRM format.
257 */
258 switch (fb->format->format) {
259 case DRM_FORMAT_BGR888:
260 /* Only supported on the ST Micro variant */
261 if (priv->variant->st_bitmux_control)
262 cntl |= CNTL_ST_LCDBPP24_PACKED | CNTL_BGR;
263 break;
264 case DRM_FORMAT_RGB888:
265 /* Only supported on the ST Micro variant */
266 if (priv->variant->st_bitmux_control)
267 cntl |= CNTL_ST_LCDBPP24_PACKED;
268 break;
269 case DRM_FORMAT_ABGR8888:
270 case DRM_FORMAT_XBGR8888:
271 if (priv->variant->st_bitmux_control)
272 cntl |= CNTL_LCDBPP24 | CNTL_BGR;
273 else
274 cntl |= CNTL_LCDBPP24;
275 break;
276 case DRM_FORMAT_ARGB8888:
277 case DRM_FORMAT_XRGB8888:
278 if (priv->variant->st_bitmux_control)
279 cntl |= CNTL_LCDBPP24;
280 else
281 cntl |= CNTL_LCDBPP24 | CNTL_BGR;
282 break;
283 case DRM_FORMAT_BGR565:
284 if (priv->variant->is_pl110)
285 cntl |= CNTL_LCDBPP16;
286 else if (priv->variant->st_bitmux_control)
287 cntl |= CNTL_LCDBPP16 | CNTL_ST_1XBPP_565 | CNTL_BGR;
288 else
289 cntl |= CNTL_LCDBPP16_565;
290 break;
291 case DRM_FORMAT_RGB565:
292 if (priv->variant->is_pl110)
293 cntl |= CNTL_LCDBPP16 | CNTL_BGR;
294 else if (priv->variant->st_bitmux_control)
295 cntl |= CNTL_LCDBPP16 | CNTL_ST_1XBPP_565;
296 else
297 cntl |= CNTL_LCDBPP16_565 | CNTL_BGR;
298 break;
299 case DRM_FORMAT_ABGR1555:
300 case DRM_FORMAT_XBGR1555:
301 cntl |= CNTL_LCDBPP16;
302 if (priv->variant->st_bitmux_control)
303 cntl |= CNTL_ST_1XBPP_5551 | CNTL_BGR;
304 break;
305 case DRM_FORMAT_ARGB1555:
306 case DRM_FORMAT_XRGB1555:
307 cntl |= CNTL_LCDBPP16;
308 if (priv->variant->st_bitmux_control)
309 cntl |= CNTL_ST_1XBPP_5551;
310 else
311 cntl |= CNTL_BGR;
312 break;
313 case DRM_FORMAT_ABGR4444:
314 case DRM_FORMAT_XBGR4444:
315 cntl |= CNTL_LCDBPP16_444;
316 if (priv->variant->st_bitmux_control)
317 cntl |= CNTL_ST_1XBPP_444 | CNTL_BGR;
318 break;
319 case DRM_FORMAT_ARGB4444:
320 case DRM_FORMAT_XRGB4444:
321 cntl |= CNTL_LCDBPP16_444;
322 if (priv->variant->st_bitmux_control)
323 cntl |= CNTL_ST_1XBPP_444;
324 else
325 cntl |= CNTL_BGR;
326 break;
327 default:
328 WARN_ONCE(true, "Unknown FB format 0x%08x\n",
329 fb->format->format);
330 break;
331 }
332
333 /* The PL110 in Integrator/Versatile does the BGR routing externally */
334 if (priv->variant->external_bgr)
335 cntl &= ~CNTL_BGR;
336
337 /* Power sequence: first enable and chill */
338 writel(cntl, priv->regs + priv->ctrl);
339
340 /*
341 * We expect this delay to stabilize the contrast
342 * voltage Vee as stipulated by the manual
343 */
344 msleep(20);
345
346 if (priv->variant_display_enable)
347 priv->variant_display_enable(drm, fb->format->format);
348
349 /* Power Up */
350 cntl |= CNTL_LCDPWR;
351 writel(cntl, priv->regs + priv->ctrl);
352
353 if (!priv->variant->broken_vblank)
354 drm_crtc_vblank_on(crtc);
355 }
356
pl111_display_disable(struct drm_simple_display_pipe * pipe)357 static void pl111_display_disable(struct drm_simple_display_pipe *pipe)
358 {
359 struct drm_crtc *crtc = &pipe->crtc;
360 struct drm_device *drm = crtc->dev;
361 struct pl111_drm_dev_private *priv = drm->dev_private;
362 u32 cntl;
363
364 if (!priv->variant->broken_vblank)
365 drm_crtc_vblank_off(crtc);
366
367 /* Power Down */
368 cntl = readl(priv->regs + priv->ctrl);
369 if (cntl & CNTL_LCDPWR) {
370 cntl &= ~CNTL_LCDPWR;
371 writel(cntl, priv->regs + priv->ctrl);
372 }
373
374 /*
375 * We expect this delay to stabilize the contrast voltage Vee as
376 * stipulated by the manual
377 */
378 msleep(20);
379
380 if (priv->variant_display_disable)
381 priv->variant_display_disable(drm);
382
383 /* Disable */
384 writel(0, priv->regs + priv->ctrl);
385
386 clk_disable_unprepare(priv->clk);
387 }
388
pl111_display_update(struct drm_simple_display_pipe * pipe,struct drm_plane_state * old_pstate)389 static void pl111_display_update(struct drm_simple_display_pipe *pipe,
390 struct drm_plane_state *old_pstate)
391 {
392 struct drm_crtc *crtc = &pipe->crtc;
393 struct drm_device *drm = crtc->dev;
394 struct pl111_drm_dev_private *priv = drm->dev_private;
395 struct drm_pending_vblank_event *event = crtc->state->event;
396 struct drm_plane *plane = &pipe->plane;
397 struct drm_plane_state *pstate = plane->state;
398 struct drm_framebuffer *fb = pstate->fb;
399
400 if (fb) {
401 u32 addr = drm_fb_dma_get_gem_addr(fb, pstate, 0);
402
403 writel(addr, priv->regs + CLCD_UBAS);
404 }
405
406 if (event) {
407 crtc->state->event = NULL;
408
409 spin_lock_irq(&crtc->dev->event_lock);
410 if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0)
411 drm_crtc_arm_vblank_event(crtc, event);
412 else
413 drm_crtc_send_vblank_event(crtc, event);
414 spin_unlock_irq(&crtc->dev->event_lock);
415 }
416 }
417
pl111_display_enable_vblank(struct drm_simple_display_pipe * pipe)418 static int pl111_display_enable_vblank(struct drm_simple_display_pipe *pipe)
419 {
420 struct drm_crtc *crtc = &pipe->crtc;
421 struct drm_device *drm = crtc->dev;
422 struct pl111_drm_dev_private *priv = drm->dev_private;
423
424 writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb);
425
426 return 0;
427 }
428
pl111_display_disable_vblank(struct drm_simple_display_pipe * pipe)429 static void pl111_display_disable_vblank(struct drm_simple_display_pipe *pipe)
430 {
431 struct drm_crtc *crtc = &pipe->crtc;
432 struct drm_device *drm = crtc->dev;
433 struct pl111_drm_dev_private *priv = drm->dev_private;
434
435 writel(0, priv->regs + priv->ienb);
436 }
437
438 static struct drm_simple_display_pipe_funcs pl111_display_funcs = {
439 .mode_valid = pl111_mode_valid,
440 .check = pl111_display_check,
441 .enable = pl111_display_enable,
442 .disable = pl111_display_disable,
443 .update = pl111_display_update,
444 };
445
pl111_clk_div_choose_div(struct clk_hw * hw,unsigned long rate,unsigned long * prate,bool set_parent)446 static int pl111_clk_div_choose_div(struct clk_hw *hw, unsigned long rate,
447 unsigned long *prate, bool set_parent)
448 {
449 int best_div = 1, div;
450 struct clk_hw *parent = clk_hw_get_parent(hw);
451 unsigned long best_prate = 0;
452 unsigned long best_diff = ~0ul;
453 int max_div = (1 << (TIM2_PCD_LO_BITS + TIM2_PCD_HI_BITS)) - 1;
454
455 for (div = 1; div < max_div; div++) {
456 unsigned long this_prate, div_rate, diff;
457
458 if (set_parent)
459 this_prate = clk_hw_round_rate(parent, rate * div);
460 else
461 this_prate = *prate;
462 div_rate = DIV_ROUND_UP_ULL(this_prate, div);
463 diff = abs(rate - div_rate);
464
465 if (diff < best_diff) {
466 best_div = div;
467 best_diff = diff;
468 best_prate = this_prate;
469 }
470 }
471
472 *prate = best_prate;
473 return best_div;
474 }
475
pl111_clk_div_round_rate(struct clk_hw * hw,unsigned long rate,unsigned long * prate)476 static long pl111_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
477 unsigned long *prate)
478 {
479 int div = pl111_clk_div_choose_div(hw, rate, prate, true);
480
481 return DIV_ROUND_UP_ULL(*prate, div);
482 }
483
pl111_clk_div_recalc_rate(struct clk_hw * hw,unsigned long prate)484 static unsigned long pl111_clk_div_recalc_rate(struct clk_hw *hw,
485 unsigned long prate)
486 {
487 struct pl111_drm_dev_private *priv =
488 container_of(hw, struct pl111_drm_dev_private, clk_div);
489 u32 tim2 = readl(priv->regs + CLCD_TIM2);
490 int div;
491
492 if (tim2 & TIM2_BCD)
493 return prate;
494
495 div = tim2 & TIM2_PCD_LO_MASK;
496 div |= (tim2 & TIM2_PCD_HI_MASK) >>
497 (TIM2_PCD_HI_SHIFT - TIM2_PCD_LO_BITS);
498 div += 2;
499
500 return DIV_ROUND_UP_ULL(prate, div);
501 }
502
pl111_clk_div_set_rate(struct clk_hw * hw,unsigned long rate,unsigned long prate)503 static int pl111_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
504 unsigned long prate)
505 {
506 struct pl111_drm_dev_private *priv =
507 container_of(hw, struct pl111_drm_dev_private, clk_div);
508 int div = pl111_clk_div_choose_div(hw, rate, &prate, false);
509 u32 tim2;
510
511 spin_lock(&priv->tim2_lock);
512 tim2 = readl(priv->regs + CLCD_TIM2);
513 tim2 &= ~(TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK);
514
515 if (div == 1) {
516 tim2 |= TIM2_BCD;
517 } else {
518 div -= 2;
519 tim2 |= div & TIM2_PCD_LO_MASK;
520 tim2 |= (div >> TIM2_PCD_LO_BITS) << TIM2_PCD_HI_SHIFT;
521 }
522
523 writel(tim2, priv->regs + CLCD_TIM2);
524 spin_unlock(&priv->tim2_lock);
525
526 return 0;
527 }
528
529 static const struct clk_ops pl111_clk_div_ops = {
530 .recalc_rate = pl111_clk_div_recalc_rate,
531 .round_rate = pl111_clk_div_round_rate,
532 .set_rate = pl111_clk_div_set_rate,
533 };
534
535 static int
pl111_init_clock_divider(struct drm_device * drm)536 pl111_init_clock_divider(struct drm_device *drm)
537 {
538 struct pl111_drm_dev_private *priv = drm->dev_private;
539 struct clk *parent = devm_clk_get(drm->dev, "clcdclk");
540 struct clk_hw *div = &priv->clk_div;
541 const char *parent_name;
542 struct clk_init_data init = {
543 .name = "pl111_div",
544 .ops = &pl111_clk_div_ops,
545 .parent_names = &parent_name,
546 .num_parents = 1,
547 .flags = CLK_SET_RATE_PARENT,
548 };
549 int ret;
550
551 if (IS_ERR(parent)) {
552 dev_err(drm->dev, "CLCD: unable to get clcdclk.\n");
553 return PTR_ERR(parent);
554 }
555
556 spin_lock_init(&priv->tim2_lock);
557
558 /* If the clock divider is broken, use the parent directly */
559 if (priv->variant->broken_clockdivider) {
560 priv->clk = parent;
561 return 0;
562 }
563 parent_name = __clk_get_name(parent);
564 div->init = &init;
565
566 ret = devm_clk_hw_register(drm->dev, div);
567
568 priv->clk = div->clk;
569 return ret;
570 }
571
pl111_display_init(struct drm_device * drm)572 int pl111_display_init(struct drm_device *drm)
573 {
574 struct pl111_drm_dev_private *priv = drm->dev_private;
575 int ret;
576
577 ret = pl111_init_clock_divider(drm);
578 if (ret)
579 return ret;
580
581 if (!priv->variant->broken_vblank) {
582 pl111_display_funcs.enable_vblank = pl111_display_enable_vblank;
583 pl111_display_funcs.disable_vblank = pl111_display_disable_vblank;
584 }
585
586 ret = drm_simple_display_pipe_init(drm, &priv->pipe,
587 &pl111_display_funcs,
588 priv->variant->formats,
589 priv->variant->nformats,
590 NULL,
591 priv->connector);
592 if (ret)
593 return ret;
594
595 return 0;
596 }
597