1 /*
2 * Copyright 2019-2021 The OpenSSL Project Authors. All Rights Reserved.
3 *
4 * Licensed under the Apache License 2.0 (the "License"). You may not use
5 * this file except in compliance with the License. You can obtain a copy
6 * in the file LICENSE in the source distribution or at
7 * https://www.openssl.org/source/license.html
8 */
9
10 /*
11 * A simple ASN.1 DER encoder/decoder for DSA-Sig-Value and ECDSA-Sig-Value.
12 *
13 * DSA-Sig-Value ::= SEQUENCE {
14 * r INTEGER,
15 * s INTEGER
16 * }
17 *
18 * ECDSA-Sig-Value ::= SEQUENCE {
19 * r INTEGER,
20 * s INTEGER
21 * }
22 */
23
24 #include <openssl/crypto.h>
25 #include <openssl/bn.h>
26 #include "crypto/asn1_dsa.h"
27 #include "internal/packet.h"
28
29 #define ID_SEQUENCE 0x30
30 #define ID_INTEGER 0x02
31
32 /*
33 * Outputs the encoding of the length octets for a DER value with a content
34 * length of cont_len bytes to pkt. The maximum supported content length is
35 * 65535 (0xffff) bytes.
36 *
37 * Returns 1 on success or 0 on error.
38 */
ossl_encode_der_length(WPACKET * pkt,size_t cont_len)39 int ossl_encode_der_length(WPACKET *pkt, size_t cont_len)
40 {
41 if (cont_len > 0xffff)
42 return 0; /* Too large for supported length encodings */
43
44 if (cont_len > 0xff) {
45 if (!WPACKET_put_bytes_u8(pkt, 0x82)
46 || !WPACKET_put_bytes_u16(pkt, cont_len))
47 return 0;
48 } else {
49 if (cont_len > 0x7f
50 && !WPACKET_put_bytes_u8(pkt, 0x81))
51 return 0;
52 if (!WPACKET_put_bytes_u8(pkt, cont_len))
53 return 0;
54 }
55
56 return 1;
57 }
58
59 /*
60 * Outputs the DER encoding of a positive ASN.1 INTEGER to pkt.
61 *
62 * Results in an error if n is negative or too large.
63 *
64 * Returns 1 on success or 0 on error.
65 */
ossl_encode_der_integer(WPACKET * pkt,const BIGNUM * n)66 int ossl_encode_der_integer(WPACKET *pkt, const BIGNUM *n)
67 {
68 unsigned char *bnbytes;
69 size_t cont_len;
70
71 if (BN_is_negative(n))
72 return 0;
73
74 /*
75 * Calculate the ASN.1 INTEGER DER content length for n.
76 * This is the number of whole bytes required to represent n (i.e. rounded
77 * down), plus one.
78 * If n is zero then the content is a single zero byte (length = 1).
79 * If the number of bits of n is a multiple of 8 then an extra zero padding
80 * byte is included to ensure that the value is still treated as positive
81 * in the INTEGER two's complement representation.
82 */
83 cont_len = BN_num_bits(n) / 8 + 1;
84
85 if (!WPACKET_start_sub_packet(pkt)
86 || !WPACKET_put_bytes_u8(pkt, ID_INTEGER)
87 || !ossl_encode_der_length(pkt, cont_len)
88 || !WPACKET_allocate_bytes(pkt, cont_len, &bnbytes)
89 || !WPACKET_close(pkt))
90 return 0;
91
92 if (bnbytes != NULL
93 && BN_bn2binpad(n, bnbytes, (int)cont_len) != (int)cont_len)
94 return 0;
95
96 return 1;
97 }
98
99 /*
100 * Outputs the DER encoding of a DSA-Sig-Value or ECDSA-Sig-Value to pkt. pkt
101 * may be initialised with a NULL buffer which enables pkt to be used to
102 * calculate how many bytes would be needed.
103 *
104 * Returns 1 on success or 0 on error.
105 */
ossl_encode_der_dsa_sig(WPACKET * pkt,const BIGNUM * r,const BIGNUM * s)106 int ossl_encode_der_dsa_sig(WPACKET *pkt, const BIGNUM *r, const BIGNUM *s)
107 {
108 WPACKET tmppkt, *dummypkt;
109 size_t cont_len;
110 int isnull = WPACKET_is_null_buf(pkt);
111
112 if (!WPACKET_start_sub_packet(pkt))
113 return 0;
114
115 if (!isnull) {
116 if (!WPACKET_init_null(&tmppkt, 0))
117 return 0;
118 dummypkt = &tmppkt;
119 } else {
120 /* If the input packet has a NULL buffer, we don't need a dummy packet */
121 dummypkt = pkt;
122 }
123
124 /* Calculate the content length */
125 if (!ossl_encode_der_integer(dummypkt, r)
126 || !ossl_encode_der_integer(dummypkt, s)
127 || !WPACKET_get_length(dummypkt, &cont_len)
128 || (!isnull && !WPACKET_finish(dummypkt))) {
129 if (!isnull)
130 WPACKET_cleanup(dummypkt);
131 return 0;
132 }
133
134 /* Add the tag and length bytes */
135 if (!WPACKET_put_bytes_u8(pkt, ID_SEQUENCE)
136 || !ossl_encode_der_length(pkt, cont_len)
137 /*
138 * Really encode the integers. We already wrote to the main pkt
139 * if it had a NULL buffer, so don't do it again
140 */
141 || (!isnull && !ossl_encode_der_integer(pkt, r))
142 || (!isnull && !ossl_encode_der_integer(pkt, s))
143 || !WPACKET_close(pkt))
144 return 0;
145
146 return 1;
147 }
148
149 /*
150 * Decodes the DER length octets in pkt and initialises subpkt with the
151 * following bytes of that length.
152 *
153 * Returns 1 on success or 0 on failure.
154 */
ossl_decode_der_length(PACKET * pkt,PACKET * subpkt)155 int ossl_decode_der_length(PACKET *pkt, PACKET *subpkt)
156 {
157 unsigned int byte;
158
159 if (!PACKET_get_1(pkt, &byte))
160 return 0;
161
162 if (byte < 0x80)
163 return PACKET_get_sub_packet(pkt, subpkt, (size_t)byte);
164 if (byte == 0x81)
165 return PACKET_get_length_prefixed_1(pkt, subpkt);
166 if (byte == 0x82)
167 return PACKET_get_length_prefixed_2(pkt, subpkt);
168
169 /* Too large, invalid, or not DER. */
170 return 0;
171 }
172
173 /*
174 * Decodes a single ASN.1 INTEGER value from pkt, which must be DER encoded,
175 * and updates n with the decoded value.
176 *
177 * The BIGNUM, n, must have already been allocated by calling BN_new().
178 * pkt must not be NULL.
179 *
180 * An attempt to consume more than len bytes results in an error.
181 * Returns 1 on success or 0 on error.
182 *
183 * If the PACKET is supposed to only contain a single INTEGER value with no
184 * trailing garbage then it is up to the caller to verify that all bytes
185 * were consumed.
186 */
ossl_decode_der_integer(PACKET * pkt,BIGNUM * n)187 int ossl_decode_der_integer(PACKET *pkt, BIGNUM *n)
188 {
189 PACKET contpkt, tmppkt;
190 unsigned int tag, tmp;
191
192 /* Check we have an integer and get the content bytes */
193 if (!PACKET_get_1(pkt, &tag)
194 || tag != ID_INTEGER
195 || !ossl_decode_der_length(pkt, &contpkt))
196 return 0;
197
198 /* Peek ahead at the first bytes to check for proper encoding */
199 tmppkt = contpkt;
200 /* The INTEGER must be positive */
201 if (!PACKET_get_1(&tmppkt, &tmp)
202 || (tmp & 0x80) != 0)
203 return 0;
204 /* If there a zero padding byte the next byte must have the msb set */
205 if (PACKET_remaining(&tmppkt) > 0 && tmp == 0) {
206 if (!PACKET_get_1(&tmppkt, &tmp)
207 || (tmp & 0x80) == 0)
208 return 0;
209 }
210
211 if (BN_bin2bn(PACKET_data(&contpkt),
212 (int)PACKET_remaining(&contpkt), n) == NULL)
213 return 0;
214
215 return 1;
216 }
217
218 /*
219 * Decodes a single DSA-Sig-Value or ECDSA-Sig-Value from *ppin, which must be
220 * DER encoded, updates r and s with the decoded values, and increments *ppin
221 * past the data that was consumed.
222 *
223 * The BIGNUMs, r and s, must have already been allocated by calls to BN_new().
224 * ppin and *ppin must not be NULL.
225 *
226 * An attempt to consume more than len bytes results in an error.
227 * Returns the number of bytes of input consumed or 0 if an error occurs.
228 *
229 * If the buffer is supposed to only contain a single [EC]DSA-Sig-Value with no
230 * trailing garbage then it is up to the caller to verify that all bytes
231 * were consumed.
232 */
ossl_decode_der_dsa_sig(BIGNUM * r,BIGNUM * s,const unsigned char ** ppin,size_t len)233 size_t ossl_decode_der_dsa_sig(BIGNUM *r, BIGNUM *s,
234 const unsigned char **ppin, size_t len)
235 {
236 size_t consumed;
237 PACKET pkt, contpkt;
238 unsigned int tag;
239
240 if (!PACKET_buf_init(&pkt, *ppin, len)
241 || !PACKET_get_1(&pkt, &tag)
242 || tag != ID_SEQUENCE
243 || !ossl_decode_der_length(&pkt, &contpkt)
244 || !ossl_decode_der_integer(&contpkt, r)
245 || !ossl_decode_der_integer(&contpkt, s)
246 || PACKET_remaining(&contpkt) != 0)
247 return 0;
248
249 consumed = PACKET_data(&pkt) - *ppin;
250 *ppin += consumed;
251 return consumed;
252 }
253