1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
24 */
25
26 #include <assert.h>
27 #include <ctype.h>
28 #include <err.h>
29 #include <errno.h>
30 #include <execinfo.h>
31 #include <kstat.h>
32 #include <libdladm.h>
33 #include <libdllink.h>
34 #include <libdlstat.h>
35 #include <libdlwlan.h>
36 #include <libnwam.h>
37 #include <limits.h>
38 #include <pthread.h>
39 #include <stdio.h>
40 #include <stdlib.h>
41 #include <string.h>
42 #include <strings.h>
43 #include <sys/stat.h>
44 #include <sys/time.h>
45 #include <sys/types.h>
46 #include <unistd.h>
47 #include <libdlpi.h>
48 #include <ucontext.h>
49
50 #include "events.h"
51 #include "llp.h"
52 #include "objects.h"
53 #include "ncp.h"
54 #include "ncu.h"
55 #include "known_wlans.h"
56 #include "util.h"
57
58 /*
59 * ncu_phys.c - contains routines that are physical-link specific.
60 * Mostly WiFi code.
61 */
62
63 /*
64 * Get link state from kstats. Used to determine initial link state for
65 * cases where drivers do not support DL_NOTE_LINK_UP/DOWN. If link
66 * state is LINK_STATE_UNKNOWN, we assume the link is up and the IP NCU
67 * timeout will cause us to move on to other links.
68 */
69 link_state_t
nwamd_get_link_state(const char * name)70 nwamd_get_link_state(const char *name)
71 {
72 kstat_ctl_t *kcp;
73 kstat_t *ksp;
74 char module[DLPI_LINKNAME_MAX];
75 uint_t instance;
76 link_state_t link_state = LINK_STATE_UNKNOWN;
77
78 if ((kcp = kstat_open()) == NULL)
79 return (link_state);
80
81 if (dlpi_parselink(name, module, &instance) != DLPI_SUCCESS)
82 goto out;
83
84 if ((ksp = kstat_lookup(kcp, module, instance, "mac")) == NULL) {
85 /*
86 * The kstat query could fail if the underlying MAC
87 * driver was already detached.
88 */
89 goto out;
90 }
91
92 if (kstat_read(kcp, ksp, NULL) == -1)
93 goto out;
94
95 (void) dladm_kstat_value(ksp, "link_state", KSTAT_DATA_UINT32,
96 &link_state);
97
98 out:
99 (void) kstat_close(kcp);
100
101 return (link_state);
102 }
103
104 /*
105 * Set/unset link propeties. At present, these are MAC address, link MTU and
106 * autopush modules. We set MAC address last as setting it may cause a chip
107 * reset which can prevent other device property setting succeeding.
108 */
109 void
nwamd_set_unset_link_properties(nwamd_ncu_t * ncu,boolean_t set)110 nwamd_set_unset_link_properties(nwamd_ncu_t *ncu, boolean_t set)
111 {
112 dlpi_handle_t dh = ncu->ncu_link.nwamd_link_dhp;
113 char *addr = set ? ncu->ncu_link.nwamd_link_mac_addr : NULL;
114 uint64_t mtu = set ? ncu->ncu_link.nwamd_link_mtu : 0;
115 char **autopush = set ? ncu->ncu_link.nwamd_link_autopush : NULL;
116 uint_t num_autopush = set ? ncu->ncu_link.nwamd_link_num_autopush : 0;
117 uchar_t *hwaddr = NULL, curraddr[DLPI_PHYSADDR_MAX];
118 size_t hwaddrlen = DLPI_PHYSADDR_MAX;
119 int retval;
120 dladm_status_t status;
121 char mtustr[DLADM_PROP_VAL_MAX];
122 char *cp;
123 char errmsg[DLADM_STRSIZE];
124 uint_t cnt = 1;
125
126 /*
127 * Set MTU here - either default value (if mtu == 0 indicating it has
128 * not been set) or specified value.
129 */
130 if (mtu == 0) {
131 cp = mtustr;
132 status = dladm_get_linkprop(dld_handle,
133 ncu->ncu_link.nwamd_link_id, DLADM_PROP_VAL_DEFAULT, "mtu",
134 &cp, &cnt);
135 if (status != DLADM_STATUS_OK) {
136 nlog(LOG_ERR, "nwamd_set_unset_link_properties: "
137 "dladm_get_linkprop failed: %s",
138 dladm_status2str(status, errmsg));
139 return;
140 }
141 } else {
142 (void) snprintf(mtustr, DLADM_PROP_VAL_MAX, "%lld", mtu);
143 }
144
145 cp = mtustr;
146
147 nlog(LOG_DEBUG, "nwamd_set_unset_link_properties: setting MTU of %s "
148 "for link %s", mtustr, ncu->ncu_name);
149 status = dladm_set_linkprop(dld_handle, ncu->ncu_link.nwamd_link_id,
150 "mtu", &cp, 1, DLADM_OPT_ACTIVE);
151 if (status != DLADM_STATUS_OK) {
152 nlog(LOG_ERR, "nwamd_set_unset_link_properties: "
153 "dladm_set_linkprop failed: %s",
154 dladm_status2str(status, errmsg));
155 }
156
157 nlog(LOG_DEBUG, "nwamd_set_unset_link_properties: setting %d "
158 "autopush module for link %s", num_autopush, ncu->ncu_name);
159 status = dladm_set_linkprop(dld_handle, ncu->ncu_link.nwamd_link_id,
160 "autopush", autopush, num_autopush, DLADM_OPT_ACTIVE);
161 if (status != DLADM_STATUS_OK) {
162 nlog(LOG_ERR, "nwamd_set_unset_link_properties: "
163 "dladm_set_linkprop failed for autopush property: %s",
164 dladm_status2str(status, errmsg));
165 }
166
167 /*
168 * Set physical address - either factory (if link_mac_addr is NULL
169 * or we are unsetting properties) or specified MAC address string.
170 */
171 if (addr == NULL) {
172 if ((hwaddr = calloc(1, DLPI_PHYSADDR_MAX)) == NULL) {
173 nlog(LOG_ERR,
174 "nwamd_set_unset_link_properties: malloc() failed");
175 return;
176 }
177 if ((retval = dlpi_get_physaddr(dh, DL_FACT_PHYS_ADDR,
178 hwaddr, &hwaddrlen)) != DLPI_SUCCESS) {
179 nlog(LOG_ERR, "nwamd_set_unset_link_properties: "
180 "could not get physical address for %s: %s",
181 ncu->ncu_name, dlpi_strerror(retval));
182 free(hwaddr);
183 return;
184 }
185 } else {
186 int addrlen = hwaddrlen;
187 if ((hwaddr = _link_aton(addr, &addrlen)) == NULL) {
188 if (addrlen == -1) {
189 nlog(LOG_ERR,
190 "nwamd_set_unset_link_properties: "
191 "%s: bad address for %s",
192 addr, ncu->ncu_name);
193 return;
194 } else {
195 nlog(LOG_ERR, "nwamd_set_unset_link_properties:"
196 " malloc() failed");
197 return;
198 }
199 }
200 hwaddrlen = addrlen;
201 }
202
203 /*
204 * Only set physical address if desired address differs from current -
205 * this avoids unnecessary chip resets for some drivers.
206 */
207 retval = dlpi_get_physaddr(dh, DL_CURR_PHYS_ADDR, curraddr,
208 &hwaddrlen);
209 if (retval != DLPI_SUCCESS || bcmp(curraddr, hwaddr, hwaddrlen) != 0) {
210 retval = dlpi_set_physaddr(dh, DL_CURR_PHYS_ADDR, hwaddr,
211 hwaddrlen);
212 if (retval != DLPI_SUCCESS) {
213 nlog(LOG_ERR, "nwamd_set_unset_link_properties:"
214 "failed setting mac address on %s: %s",
215 ncu->ncu_name, dlpi_strerror(retval));
216 }
217 }
218 free(hwaddr);
219 }
220
221 #define WLAN_ENC(sec) \
222 ((sec == DLADM_WLAN_SECMODE_WPA ? "WPA" : \
223 (sec == DLADM_WLAN_SECMODE_WEP ? "WEP" : "none")))
224
225 #define NEED_ENC(sec) \
226 (sec == DLADM_WLAN_SECMODE_WPA || sec == DLADM_WLAN_SECMODE_WEP)
227
228 #define WIRELESS_LAN_INIT_COUNT 8
229
230 /*
231 * The variable wireless_scan_level specifies the signal level
232 * that we will initiate connections to previously-visited APs
233 * at when we are in the connected state.
234 */
235 dladm_wlan_strength_t wireless_scan_level = DLADM_WLAN_STRENGTH_WEAK;
236
237 /*
238 * The variable wireless_scan_interval specifies how often the periodic
239 * scan occurs.
240 */
241 uint64_t wireless_scan_interval = WIRELESS_SCAN_INTERVAL_DEFAULT;
242
243 /*
244 * The variable wireless_autoconf specifies if we use dladm_wlan_autoconf()
245 * to connect.
246 */
247 boolean_t wireless_autoconf = B_FALSE;
248
249 /*
250 * The variable wireless_strict_bssid specifies if we only connect
251 * to WLANs with BSSIDs that we previously connected to.
252 */
253 boolean_t wireless_strict_bssid = B_FALSE;
254
255 /*
256 * We need to ensure scan or connect threads do not run concurrently
257 * on any links - otherwise we get radio interference. Acquire this
258 * lock on entering scan/connect threads to prevent this.
259 */
260 pthread_mutex_t wireless_mutex = PTHREAD_MUTEX_INITIALIZER;
261
262 static void
scanconnect_entry(void)263 scanconnect_entry(void)
264 {
265 (void) pthread_mutex_lock(&wireless_mutex);
266 }
267
268 static void
scanconnect_exit(void)269 scanconnect_exit(void)
270 {
271 (void) pthread_mutex_unlock(&wireless_mutex);
272 }
273
274 /*
275 * Below are functions used to handle storage/retrieval of keys
276 * for a given WLAN. The keys are stored/retrieved using dladm_set_secobj()
277 * and dladm_get_secobj().
278 */
279
280 /*
281 * Convert key hexascii string to raw secobj value. This
282 * code is very similar to convert_secobj() in dladm.c, it would
283 * be good to have a libdladm function to convert values.
284 */
285 static int
key_string_to_secobj_value(char * buf,uint8_t * obj_val,uint_t * obj_lenp,dladm_secobj_class_t class)286 key_string_to_secobj_value(char *buf, uint8_t *obj_val, uint_t *obj_lenp,
287 dladm_secobj_class_t class)
288 {
289 size_t buf_len = strlen(buf);
290
291 nlog(LOG_DEBUG, "before: key_string_to_secobj_value: buf_len = %d",
292 buf_len);
293 if (buf_len == 0) {
294 /* length zero means "delete" */
295 return (0);
296 }
297
298 if (buf[buf_len - 1] == '\n')
299 buf[--buf_len] = '\0';
300
301 nlog(LOG_DEBUG, "after: key_string_to_secobj_value: buf_len = %d",
302 buf_len);
303
304 if (class == DLADM_SECOBJ_CLASS_WPA) {
305 /*
306 * Per IEEE802.11i spec, the Pre-shared key (PSK) length should
307 * be between 8 and 63.
308 */
309 if (buf_len < 8 || buf_len > 63) {
310 nlog(LOG_ERR,
311 "key_string_to_secobj_value:"
312 " invalid WPA key length: buf_len = %d", buf_len);
313 return (-1);
314 }
315 (void) memcpy(obj_val, buf, (uint_t)buf_len);
316 *obj_lenp = buf_len;
317 return (0);
318 }
319
320 switch (buf_len) {
321 case 5: /* ASCII key sizes */
322 case 13:
323 (void) memcpy(obj_val, buf, (uint_t)buf_len);
324 *obj_lenp = (uint_t)buf_len;
325 break;
326 case 10:
327 case 26: /* Hex key sizes, not preceded by 0x */
328 if (hexascii_to_octet(buf, (uint_t)buf_len, obj_val, obj_lenp)
329 != 0) {
330 nlog(LOG_ERR,
331 "key_string_to_secobj_value: invalid WEP key");
332 return (-1);
333 }
334 break;
335 case 12:
336 case 28: /* Hex key sizes, preceded by 0x */
337 if (strncmp(buf, "0x", 2) != 0 ||
338 hexascii_to_octet(buf + 2, (uint_t)buf_len - 2, obj_val,
339 obj_lenp) != 0) {
340 nlog(LOG_ERR,
341 "key_string_to_secobj_value: invalid WEP key");
342 return (-1);
343 }
344 break;
345 default:
346 syslog(LOG_ERR,
347 "key_string_to_secobj_value: invalid WEP key length");
348 return (-1);
349 }
350 return (0);
351 }
352
353 /*
354 * Callback used on each known WLAN:
355 * return 1 if a secobj, linked with an existing kwown wlan, has the same name
356 * of the secobj that is being created.
357 */
358
359 static int
find_keyname_cb(nwam_known_wlan_handle_t kwh,void * new_keyname)360 find_keyname_cb(nwam_known_wlan_handle_t kwh, void *new_keyname)
361 {
362 nwam_error_t err;
363 nwam_value_t old_key;
364
365 char **old_keyname;
366 uint_t num_old_keyname, i;
367
368 if ((err = nwam_known_wlan_get_prop_value(kwh,
369 NWAM_KNOWN_WLAN_PROP_KEYNAME, &old_key)) != NWAM_SUCCESS) {
370 nlog(LOG_ERR, "find_keyname_cb: nwam_known_wlan_get_prop: %s",
371 nwam_strerror(err));
372 return (0);
373 }
374 if ((err = nwam_value_get_string_array(old_key, &old_keyname,
375 &num_old_keyname))
376 != NWAM_SUCCESS) {
377 nlog(LOG_ERR, "find_keyname_cb: nwam_value_get_string: %s",
378 nwam_strerror(err));
379 nwam_value_free(old_key);
380 return (0);
381 }
382 nwam_value_free(old_key);
383 for (i = 0; i < num_old_keyname; i++) {
384 if (strcmp(old_keyname[i], (const char *)new_keyname) == 0)
385 /* Found matching keyname so terminate walk */
386 return (1);
387 }
388 return (0);
389 }
390
391 /*
392 * Print the key name format into the appropriate field, then convert any ":"
393 * characters to ".", as ":[1-4]" is the slot indicator, which otherwise
394 * would trip us up. Invalid characters for secobj names are ignored.
395 * The fourth parameter is expected to be of size DLADM_SECOBJ_NAME_MAX.
396 *
397 * (Note that much of the system uses DLADM_WLAN_MAX_KEYNAME_LEN, which is 64
398 * rather than 32, but that dladm_get_secobj will fail if a length greater than
399 * DLD_SECOBJ_NAME_MAX is seen, and that's 32. This is all horribly broken.)
400 */
401 void
nwamd_set_key_name(const char * essid,const char * bssid,char * name,size_t nsz)402 nwamd_set_key_name(const char *essid, const char *bssid, char *name, size_t nsz)
403 {
404 int i, j;
405 char secobj_name[DLADM_WLAN_MAX_KEYNAME_LEN];
406
407 /* create a concatenated string with essid and bssid */
408 if (bssid == NULL || bssid[0] == '\0') {
409 (void) snprintf(secobj_name, sizeof (secobj_name), "nwam-%s",
410 essid);
411 } else {
412 (void) snprintf(secobj_name, sizeof (secobj_name), "nwam-%s-%s",
413 essid, bssid);
414 }
415
416 /* copy only valid chars to the return string, terminating with \0 */
417 i = 0; /* index into secobj_name */
418 j = 0; /* index into name */
419 while (secobj_name[i] != '\0') {
420 if (j == nsz - 1)
421 break;
422
423 if (secobj_name[i] == ':') {
424 name[j] = '.';
425 j++;
426 } else if (isalnum(secobj_name[i]) ||
427 secobj_name[i] == '.' || secobj_name[i] == '-' ||
428 secobj_name[i] == '_') {
429 name[j] = secobj_name[i];
430 j++;
431 }
432 i++;
433 }
434 name[j] = '\0';
435 }
436
437 nwam_error_t
nwamd_wlan_set_key(const char * linkname,const char * essid,const char * bssid,uint32_t security_mode,uint_t keyslot,char * raw_key)438 nwamd_wlan_set_key(const char *linkname, const char *essid, const char *bssid,
439 uint32_t security_mode, uint_t keyslot, char *raw_key)
440 {
441 nwamd_object_t ncu_obj;
442 nwamd_ncu_t *ncu;
443 nwamd_link_t *link;
444 int ret = 0;
445 uint8_t obj_val[DLADM_SECOBJ_VAL_MAX];
446 uint_t obj_len = sizeof (obj_val);
447 char obj_name[DLADM_SECOBJ_NAME_MAX];
448 char obj_tempname[DLADM_SECOBJ_NAME_MAX];
449 dladm_status_t status;
450 char errmsg[DLADM_STRSIZE];
451 dladm_secobj_class_t class;
452
453 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
454 == NULL) {
455 nlog(LOG_ERR, "nwamd_wlan_set_key: could not find object "
456 "for link %s", linkname);
457 return (NWAM_ENTITY_NOT_FOUND);
458 }
459 ncu = ncu_obj->nwamd_object_data;
460 link = &ncu->ncu_link;
461
462 class = (security_mode == DLADM_WLAN_SECMODE_WEP ?
463 DLADM_SECOBJ_CLASS_WEP : DLADM_SECOBJ_CLASS_WPA);
464 if (key_string_to_secobj_value(raw_key, obj_val, &obj_len,
465 class) != 0) {
466 /* above function logs internally on failure */
467 nwamd_object_release(ncu_obj);
468 return (NWAM_ERROR_INTERNAL);
469 }
470
471 nlog(LOG_DEBUG, "nwamd_wlan_set_key: running for link %s", linkname);
472 /*
473 * Name key object for this WLAN so it can be later retrieved.
474 * (bssid is appended if an object, with the same keyname,
475 * already exists and is associated to a known wlan)
476 */
477 nwamd_set_key_name(essid, NULL, obj_tempname, sizeof (obj_tempname));
478 (void) nwam_walk_known_wlans(find_keyname_cb, obj_tempname, 0, &ret);
479 /*
480 * We also check if the keyval is the same. The user might want
481 * to use the same key for more APs with the same ESSID.
482 * This can result in a known wlan with multiple BSSIDs
483 */
484 if (ret == 1) {
485 dladm_wlan_key_t *old_secobj = nwamd_wlan_get_key_named(
486 obj_tempname, security_mode);
487 nlog(LOG_DEBUG, "found existing obj_name %s", obj_tempname);
488 ret = memcmp((*old_secobj).wk_val, obj_val, obj_len);
489 nwamd_set_key_name(essid, ret ? bssid : NULL, obj_name,
490 sizeof (obj_name));
491 free(old_secobj);
492 } else {
493 nwamd_set_key_name(essid, NULL, obj_name,
494 sizeof (obj_name));
495 }
496 nlog(LOG_DEBUG, "store_key: obj_name is %s", obj_name);
497
498 /*
499 * We have validated the new key, so remove the old one.
500 * This will actually delete the keyobj only if the user had set
501 * a wrong key and is replacing it with a new one for the same AP.
502 */
503 status = dladm_unset_secobj(dld_handle, obj_name,
504 DLADM_OPT_ACTIVE | DLADM_OPT_PERSIST);
505 if (status != DLADM_STATUS_OK && status != DLADM_STATUS_NOTFOUND) {
506 nlog(LOG_ERR, "store_key: could not remove old secure object "
507 "'%s' for key: %s", obj_name,
508 dladm_status2str(status, errmsg));
509 nwamd_object_release(ncu_obj);
510 return (NWAM_ERROR_INTERNAL);
511 }
512
513 /* if we're just deleting the key, then we're done */
514 if (raw_key[0] == '\0') {
515 nwamd_object_release(ncu_obj);
516 return (NWAM_SUCCESS);
517 }
518
519 status = dladm_set_secobj(dld_handle, obj_name, class,
520 obj_val, obj_len,
521 DLADM_OPT_CREATE | DLADM_OPT_PERSIST | DLADM_OPT_ACTIVE);
522 if (status != DLADM_STATUS_OK) {
523 nlog(LOG_ERR, "store_key: could not create secure object "
524 "'%s' for key: %s", obj_name,
525 dladm_status2str(status, errmsg));
526 nwamd_object_release(ncu_obj);
527 return (NWAM_ERROR_INTERNAL);
528 }
529 link->nwamd_link_wifi_key = nwamd_wlan_get_key_named(obj_name,
530 security_mode);
531 (void) strlcpy(link->nwamd_link_wifi_keyname, obj_name,
532 sizeof (link->nwamd_link_wifi_keyname));
533 link->nwamd_link_wifi_security_mode = security_mode;
534 if (security_mode == DLADM_WLAN_SECMODE_WEP) {
535 link->nwamd_link_wifi_key->wk_idx =
536 (keyslot >= 1 && keyslot <= 4) ? keyslot : 1;
537 }
538
539 /* If link NCU is offline* or online, (re)connect. */
540 switch (ncu_obj->nwamd_object_state) {
541 case NWAM_STATE_ONLINE:
542 /* if changing the key of the connected WLAN, reconnect */
543 if (strcmp(essid, link->nwamd_link_wifi_essid) == 0)
544 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
545 ncu_obj->nwamd_object_name, NWAM_STATE_ONLINE,
546 NWAM_AUX_STATE_LINK_WIFI_CONNECTING);
547 break;
548 case NWAM_STATE_OFFLINE_TO_ONLINE:
549 /* if we are waiting for the key, connect */
550 if (ncu_obj->nwamd_object_aux_state ==
551 NWAM_AUX_STATE_LINK_WIFI_NEED_KEY)
552 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
553 ncu_obj->nwamd_object_name,
554 NWAM_STATE_OFFLINE_TO_ONLINE,
555 NWAM_AUX_STATE_LINK_WIFI_CONNECTING);
556 break;
557 default:
558 break;
559 }
560 nwamd_object_release(ncu_obj);
561
562 return (NWAM_SUCCESS);
563 }
564
565 /*
566 * returns NULL if no key was recovered from libdladm. Passing in
567 * security mode of 0 means we don't care what key type it is.
568 */
569 dladm_wlan_key_t *
nwamd_wlan_get_key_named(const char * name,uint32_t security_mode)570 nwamd_wlan_get_key_named(const char *name, uint32_t security_mode)
571 {
572 dladm_status_t status;
573 char errmsg[DLADM_STRSIZE];
574 dladm_wlan_key_t *cooked_key;
575 dladm_secobj_class_t class;
576
577 if (security_mode == DLADM_WLAN_SECMODE_NONE)
578 return (NULL);
579
580 /*
581 * Newly-allocated key must be freed by caller, or by
582 * subsequent call to nwamd_wlan_get_key_named().
583 */
584 if ((cooked_key = malloc(sizeof (dladm_wlan_key_t))) == NULL) {
585 nlog(LOG_ERR, "nwamd_wlan_get_key_named: malloc failed");
586 return (NULL);
587 }
588
589 /*
590 * Set name appropriately to retrieve key for this WLAN. Note that we
591 * cannot use the actual wk_name buffer size, as it's two times too
592 * large for dladm_get_secobj.
593 */
594 (void) strlcpy(cooked_key->wk_name, name, DLADM_SECOBJ_NAME_MAX);
595 nlog(LOG_DEBUG, "nwamd_wlan_get_key_named: len = %d, object = %s\n",
596 strlen(cooked_key->wk_name), cooked_key->wk_name);
597 cooked_key->wk_len = sizeof (cooked_key->wk_val);
598 cooked_key->wk_idx = 1;
599
600 /* Try the kernel first, then fall back to persistent storage. */
601 status = dladm_get_secobj(dld_handle, cooked_key->wk_name, &class,
602 cooked_key->wk_val, &cooked_key->wk_len,
603 DLADM_OPT_ACTIVE);
604 if (status != DLADM_STATUS_OK) {
605 nlog(LOG_DEBUG, "nwamd_wlan_get_key_named: "
606 "dladm_get_secobj(TEMP) failed: %s",
607 dladm_status2str(status, errmsg));
608 status = dladm_get_secobj(dld_handle, cooked_key->wk_name,
609 &class, cooked_key->wk_val, &cooked_key->wk_len,
610 DLADM_OPT_PERSIST);
611 }
612
613 switch (status) {
614 case DLADM_STATUS_OK:
615 nlog(LOG_DEBUG, "nwamd_wlan_get_key_named: "
616 "dladm_get_secobj succeeded: len %d", cooked_key->wk_len);
617 break;
618 case DLADM_STATUS_NOTFOUND:
619 /*
620 * We do not want an error in the case that the secobj
621 * is not found, since we then prompt for it.
622 */
623 free(cooked_key);
624 return (NULL);
625 default:
626 nlog(LOG_ERR, "nwamd_wlan_get_key_named: could not get key "
627 "from secure object '%s': %s", cooked_key->wk_name,
628 dladm_status2str(status, errmsg));
629 free(cooked_key);
630 return (NULL);
631 }
632
633 if (security_mode != 0) {
634 switch (class) {
635 case DLADM_SECOBJ_CLASS_WEP:
636 if (security_mode == DLADM_WLAN_SECMODE_WEP)
637 return (cooked_key);
638 break;
639 case DLADM_SECOBJ_CLASS_WPA:
640 if (security_mode == DLADM_WLAN_SECMODE_WPA)
641 return (cooked_key);
642 break;
643 default:
644 /* shouldn't happen */
645 nlog(LOG_ERR, "nwamd_wlan_get_key: invalid class %d",
646 class);
647 break;
648 }
649 /* key type mismatch */
650 nlog(LOG_ERR, "nwamd_wlan_get_key: key type mismatch"
651 " from secure object '%s'", cooked_key->wk_name);
652 free(cooked_key);
653 return (NULL);
654 }
655
656 return (cooked_key);
657 }
658
659 static dladm_wlan_key_t *
nwamd_wlan_get_key(const char * essid,const char * bssid,uint32_t security_mode)660 nwamd_wlan_get_key(const char *essid, const char *bssid, uint32_t security_mode)
661 {
662 char keyname[DLADM_SECOBJ_NAME_MAX];
663
664 nwamd_set_key_name(essid, bssid, keyname, DLADM_SECOBJ_NAME_MAX);
665
666 return (nwamd_wlan_get_key_named(keyname, security_mode));
667 }
668
669 /*
670 * Checks if a wireless network can be selected or not. A wireless network
671 * CANNOT be selected if the NCU is DISABLED, or the NCU is OFFLINE or
672 * ONLINE* and has lower priority than the currently active priority-group.
673 * Called with object lock held.
674 */
675 static boolean_t
wireless_selection_possible(nwamd_object_t object)676 wireless_selection_possible(nwamd_object_t object)
677 {
678 nwamd_ncu_t *ncu = object->nwamd_object_data;
679
680 if (ncu->ncu_link.nwamd_link_media != DL_WIFI)
681 return (B_FALSE);
682
683 (void) pthread_mutex_lock(&active_ncp_mutex);
684 if (object->nwamd_object_state == NWAM_STATE_DISABLED ||
685 ((object->nwamd_object_state == NWAM_STATE_OFFLINE ||
686 object->nwamd_object_state == NWAM_STATE_ONLINE_TO_OFFLINE) &&
687 ncu->ncu_link.nwamd_link_activation_mode ==
688 NWAM_ACTIVATION_MODE_PRIORITIZED &&
689 (current_ncu_priority_group == INVALID_PRIORITY_GROUP ||
690 ncu->ncu_link.nwamd_link_priority_group >
691 current_ncu_priority_group))) {
692 (void) pthread_mutex_unlock(&active_ncp_mutex);
693 return (B_FALSE);
694 }
695 (void) pthread_mutex_unlock(&active_ncp_mutex);
696
697 return (B_TRUE);
698 }
699
700 /*
701 * Update the selected and/or connected values for the
702 * scan data. If these change, we need to trigger a scan
703 * event since the updated values need to be communicated
704 * to the GUI.
705 */
706 void
nwamd_set_selected_connected(nwamd_ncu_t * ncu,boolean_t selected,boolean_t connected)707 nwamd_set_selected_connected(nwamd_ncu_t *ncu, boolean_t selected,
708 boolean_t connected)
709 {
710 nwamd_link_t *link = &ncu->ncu_link;
711 nwamd_wifi_scan_t *s = &link->nwamd_link_wifi_scan;
712 int i;
713 boolean_t trigger_scan_event = B_FALSE;
714
715 for (i = 0; i < s->nwamd_wifi_scan_curr_num; i++) {
716 if (strcmp(s->nwamd_wifi_scan_curr[i].nww_essid,
717 link->nwamd_link_wifi_essid) != 0 ||
718 (link->nwamd_link_wifi_bssid[0] != '\0' &&
719 strcmp(s->nwamd_wifi_scan_curr[i].nww_bssid,
720 link->nwamd_link_wifi_bssid) != 0))
721 continue;
722 if (selected) {
723 if (!s->nwamd_wifi_scan_curr[i].nww_selected)
724 trigger_scan_event = B_TRUE;
725 s->nwamd_wifi_scan_curr[i].nww_selected = B_TRUE;
726 } else {
727 if (s->nwamd_wifi_scan_curr[i].nww_selected)
728 trigger_scan_event = B_TRUE;
729 s->nwamd_wifi_scan_curr[i].nww_selected = B_FALSE;
730 }
731 if (connected) {
732 if (!s->nwamd_wifi_scan_curr[i].nww_connected)
733 trigger_scan_event = B_TRUE;
734 s->nwamd_wifi_scan_curr[i].nww_connected = B_TRUE;
735 } else {
736 if (s->nwamd_wifi_scan_curr[i].nww_connected)
737 trigger_scan_event = B_TRUE;
738 s->nwamd_wifi_scan_curr[i].nww_connected = B_FALSE;
739 }
740 }
741
742 if (trigger_scan_event || s->nwamd_wifi_scan_changed) {
743 nwamd_event_t scan_event = nwamd_event_init_wlan
744 (ncu->ncu_name, NWAM_EVENT_TYPE_WLAN_SCAN_REPORT, connected,
745 s->nwamd_wifi_scan_curr, s->nwamd_wifi_scan_curr_num);
746 if (scan_event != NULL) {
747 /* Avoid sending same scan data multiple times */
748 s->nwamd_wifi_scan_changed = B_FALSE;
749 nwamd_event_enqueue(scan_event);
750 }
751 }
752 }
753
754 /*
755 * Callback used on each known WLAN - if the BSSID is matched, set
756 * the ESSID of the hidden WLAN to the known WLAN name.
757 */
758 static int
find_bssid_cb(nwam_known_wlan_handle_t kwh,void * data)759 find_bssid_cb(nwam_known_wlan_handle_t kwh, void *data)
760 {
761 nwamd_link_t *link = data;
762 nwam_error_t err;
763 nwam_value_t bssidval;
764 char **bssids, *name;
765 uint_t num_bssids, i;
766
767 if ((err = nwam_known_wlan_get_prop_value(kwh,
768 NWAM_KNOWN_WLAN_PROP_BSSIDS, &bssidval)) != NWAM_SUCCESS) {
769 nlog(LOG_ERR, "find_bssid_cb: nwam_known_wlan_get_prop: %s",
770 nwam_strerror(err));
771 return (0);
772 }
773 if ((err = nwam_value_get_string_array(bssidval, &bssids, &num_bssids))
774 != NWAM_SUCCESS) {
775 nlog(LOG_ERR, "find_bssid_cb: nwam_value_get_string_array: %s",
776 nwam_strerror(err));
777 nwam_value_free(bssidval);
778 return (0);
779 }
780 for (i = 0; i < num_bssids; i++) {
781 if (strcmp(bssids[i], link->nwamd_link_wifi_bssid) == 0) {
782 if ((err = nwam_known_wlan_get_name(kwh, &name))
783 != NWAM_SUCCESS) {
784 nlog(LOG_ERR, "find_bssid_cb: "
785 "nwam_known_wlan_get_name: %s",
786 nwam_strerror(err));
787 continue;
788 }
789 (void) strlcpy(link->nwamd_link_wifi_essid, name,
790 sizeof (link->nwamd_link_wifi_essid));
791 free(name);
792 nwam_value_free(bssidval);
793 /* Found ESSID for BSSID so terminate walk */
794 return (1);
795 }
796 }
797 nwam_value_free(bssidval);
798
799 return (0);
800 }
801
802 /*
803 * We may have encountered a BSSID for a hidden WLAN before and as a result
804 * may have a known WLAN entry with this BSSID. Walk known WLANs, searching
805 * for a BSSID match. Called with object lock held.
806 */
807 static void
check_if_hidden_wlan_was_visited(nwamd_link_t * link)808 check_if_hidden_wlan_was_visited(nwamd_link_t *link)
809 {
810 (void) nwam_walk_known_wlans(find_bssid_cb, link,
811 NWAM_FLAG_KNOWN_WLAN_WALK_PRIORITY_ORDER, NULL);
812 }
813
814 nwam_error_t
nwamd_wlan_select(const char * linkname,const char * essid,const char * bssid,uint32_t security_mode,boolean_t add_to_known_wlans)815 nwamd_wlan_select(const char *linkname, const char *essid, const char *bssid,
816 uint32_t security_mode, boolean_t add_to_known_wlans)
817 {
818 nwamd_object_t ncu_obj;
819 nwamd_ncu_t *ncu;
820 nwamd_link_t *link;
821 boolean_t found_key = B_FALSE;
822
823 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
824 == NULL) {
825 nlog(LOG_ERR, "nwamd_wlan_select: could not find object "
826 "for link %s", linkname);
827 return (NWAM_ENTITY_NOT_FOUND);
828 }
829 ncu = ncu_obj->nwamd_object_data;
830 link = &ncu->ncu_link;
831
832 /*
833 * If wireless selection is not possible because of the current
834 * state or priority-group, then stop.
835 */
836 if (!wireless_selection_possible(ncu_obj)) {
837 nwamd_object_release(ncu_obj);
838 return (NWAM_ENTITY_INVALID_STATE);
839 }
840
841 /* unset selected, connected flag for previously connected wlan */
842 nwamd_set_selected_connected(ncu, B_FALSE, B_FALSE);
843
844 /* Disconnect to allow new selection to go ahead */
845 (void) dladm_wlan_disconnect(dld_handle, link->nwamd_link_id);
846
847 (void) strlcpy(link->nwamd_link_wifi_essid, essid,
848 sizeof (link->nwamd_link_wifi_essid));
849 (void) strlcpy(link->nwamd_link_wifi_bssid, bssid,
850 sizeof (link->nwamd_link_wifi_bssid));
851 link->nwamd_link_wifi_security_mode = security_mode;
852 link->nwamd_link_wifi_add_to_known_wlans = add_to_known_wlans;
853
854 /* If this is a hidden wlan, then essid is empty */
855 if (link->nwamd_link_wifi_essid[0] == '\0')
856 check_if_hidden_wlan_was_visited(link);
857
858 /* set selected flag for newly-selected WLAN */
859 nwamd_set_selected_connected(ncu, B_TRUE, B_FALSE);
860
861 /* does this WLAN require a key? If so go to NEED_KEY */
862 if (NEED_ENC(link->nwamd_link_wifi_security_mode)) {
863 /*
864 * nwam secobjs can have two formats: nwam-ESSID-BSSID and
865 * nwam-ESSID. There is no reason for searching through known
866 * wlan keynames since this is only the selection process.
867 */
868 if ((link->nwamd_link_wifi_key = nwamd_wlan_get_key
869 (link->nwamd_link_wifi_essid, link->nwamd_link_wifi_bssid,
870 link->nwamd_link_wifi_security_mode)) != NULL) {
871 /*
872 * Found old key format,
873 * known wlans with similar names might exist
874 */
875 nwamd_set_key_name(link->nwamd_link_wifi_essid,
876 link->nwamd_link_wifi_bssid,
877 link->nwamd_link_wifi_keyname,
878 DLADM_SECOBJ_NAME_MAX);
879 nlog(LOG_DEBUG, "nwamd_wlan_select: got old format "
880 "WLAN key %s",
881 link->nwamd_link_wifi_keyname);
882 found_key = B_TRUE;
883 } else if ((link->nwamd_link_wifi_key = nwamd_wlan_get_key
884 (link->nwamd_link_wifi_essid, NULL,
885 link->nwamd_link_wifi_security_mode)) != NULL) {
886 nwamd_set_key_name(link->nwamd_link_wifi_essid, NULL,
887 link->nwamd_link_wifi_keyname,
888 DLADM_SECOBJ_NAME_MAX);
889 nlog(LOG_DEBUG, "nwamd_wlan_select: got WLAN key %s",
890 link->nwamd_link_wifi_keyname);
891 found_key = B_TRUE;
892 } else {
893 nlog(LOG_ERR, "nwamd_wlan_select: could not "
894 "find key for WLAN '%s'",
895 link->nwamd_link_wifi_essid);
896 }
897 } else {
898 free(link->nwamd_link_wifi_key);
899 link->nwamd_link_wifi_key = NULL;
900 link->nwamd_link_wifi_keyname[0] = '\0';
901 }
902
903 if (NEED_ENC(link->nwamd_link_wifi_security_mode) && !found_key) {
904 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
905 ncu_obj->nwamd_object_name,
906 NWAM_STATE_OFFLINE_TO_ONLINE,
907 NWAM_AUX_STATE_LINK_WIFI_NEED_KEY);
908 } else {
909 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
910 ncu_obj->nwamd_object_name, NWAM_STATE_OFFLINE_TO_ONLINE,
911 NWAM_AUX_STATE_LINK_WIFI_CONNECTING);
912 }
913 nwamd_object_release(ncu_obj);
914
915 return (NWAM_SUCCESS);
916 }
917
918 /*
919 * See if BSSID is in visited list of BSSIDs for known WLAN. Used for
920 * strict BSSID matching (depends on wireless_strict_bssid property value).
921 */
922 static int
bssid_match(nwam_known_wlan_handle_t kwh,void * bssid)923 bssid_match(nwam_known_wlan_handle_t kwh, void *bssid)
924 {
925 nwam_value_t bssidsval;
926 nwam_error_t err;
927 char **bssids;
928 uint_t nelem, i;
929 int found = 0;
930
931 if ((err = nwam_known_wlan_get_prop_value(kwh,
932 NWAM_KNOWN_WLAN_PROP_BSSIDS, &bssidsval)) != NWAM_SUCCESS) {
933 nlog(LOG_ERR, "bssid_match: %s", nwam_strerror(err));
934 return (0);
935 }
936 if ((err = nwam_value_get_string_array(bssidsval, &bssids, &nelem))
937 != NWAM_SUCCESS) {
938 nwam_value_free(bssidsval);
939 return (0);
940 }
941 for (i = 0; i < nelem; i++) {
942 if (strcmp((const char *)bssid, bssids[i]) == 0) {
943 found = 1;
944 break;
945 }
946 }
947 nwam_value_free(bssidsval);
948
949 return (found);
950 }
951
952 /* Find most prioritized AP with strongest signal in scan data. */
953 static int
find_best_wlan_cb(nwam_known_wlan_handle_t kwh,void * data)954 find_best_wlan_cb(nwam_known_wlan_handle_t kwh, void *data)
955 {
956 nwamd_ncu_t *ncu = data;
957 nwamd_link_t *link = &ncu->ncu_link;
958 nwamd_wifi_scan_t *s = &link->nwamd_link_wifi_scan;
959 nwam_error_t err;
960 char *name = NULL;
961 int i;
962 dladm_wlan_strength_t curr_strength = 0;
963 dladm_wlan_strength_t max_strength = 0;
964 boolean_t found = B_FALSE;
965
966 if ((err = nwam_known_wlan_get_name(kwh, &name)) != NWAM_SUCCESS) {
967 nlog(LOG_ERR, "find_best_wlan_cb: could not look up name: %s",
968 nwam_strerror(err));
969 return (0);
970 }
971
972 if (link->nwamd_link_wifi_connected) {
973 (void) dladm_wlan_str2strength
974 (link->nwamd_link_wifi_signal_strength, &curr_strength);
975 }
976
977 /*
978 * If we're >= scan level, don't pick another Known WLAN if still
979 * connected (even if a Known WLAN with higher priority is available).
980 * If the user wants to connect to a different Known WLAN, it can be
981 * done from the GUI or select-wifi subcommand of nwamadm(1M).
982 */
983 if (curr_strength >= wireless_scan_level &&
984 link->nwamd_link_wifi_connected) {
985 free(name);
986 return (1);
987 }
988
989 for (i = 0; i < s->nwamd_wifi_scan_curr_num; i++) {
990 nwam_wlan_t *cur_wlan = &(s->nwamd_wifi_scan_curr[i]);
991 int b_match = bssid_match(kwh, cur_wlan->nww_bssid);
992
993 /*
994 * We need to either match the scanned essid, or in the case
995 * where the essid was not broadcast, match the scanned bssid.
996 */
997 if (strcmp(cur_wlan->nww_essid, name) != 0 &&
998 !(cur_wlan->nww_essid[0] == '\0' && b_match))
999 continue;
1000 /*
1001 * If wireless_strict_bssid is specified, need to match
1002 * BSSID too.
1003 */
1004 if (wireless_strict_bssid && !b_match)
1005 continue;
1006 /*
1007 * Found a match. Since we walk known WLANs in
1008 * priority order, it's guaranteed to be the
1009 * most prioritized. It may not be the strongest though -
1010 * we continue the walk and record the strength along
1011 * with the ESSID and BSSID, so that if we encounter
1012 * another AP with the same ESSID but a higher signal strength,
1013 * we will choose it - but only if the currently-connected
1014 * WLAN is at or below wireless_scan_level.
1015 */
1016 (void) dladm_wlan_str2strength
1017 (cur_wlan->nww_signal_strength, &curr_strength);
1018
1019 if (curr_strength > max_strength) {
1020 (void) strlcpy(link->nwamd_link_wifi_essid,
1021 cur_wlan->nww_essid,
1022 sizeof (link->nwamd_link_wifi_essid));
1023 /*
1024 * Set BSSID if wireless_strict_bssid is specified or
1025 * if this is a hidden WLAN. Store the BSSID here and
1026 * then later determine the hidden WLAN's name in the
1027 * connect thread.
1028 */
1029 if (wireless_strict_bssid ||
1030 cur_wlan->nww_essid[0] == '\0') {
1031 (void) strlcpy(link->nwamd_link_wifi_bssid,
1032 cur_wlan->nww_bssid,
1033 sizeof (link->nwamd_link_wifi_bssid));
1034 }
1035 (void) strlcpy(link->nwamd_link_wifi_signal_strength,
1036 cur_wlan->nww_signal_strength,
1037 sizeof (link->nwamd_link_wifi_signal_strength));
1038 link->nwamd_link_wifi_security_mode =
1039 cur_wlan->nww_security_mode;
1040 found = B_TRUE;
1041 }
1042 (void) dladm_wlan_str2strength
1043 (link->nwamd_link_wifi_signal_strength, &max_strength);
1044 }
1045 free(name);
1046 return (found ? 1 : 0);
1047 }
1048
1049 static boolean_t
nwamd_find_known_wlan(nwamd_object_t ncu_obj)1050 nwamd_find_known_wlan(nwamd_object_t ncu_obj)
1051 {
1052 nwamd_ncu_t *ncu = ncu_obj->nwamd_object_data;
1053 int ret;
1054
1055 /*
1056 * Walk known WLANs, finding lowest priority (preferred) WLAN
1057 * in our scan results.
1058 */
1059 (void) nwam_walk_known_wlans(find_best_wlan_cb, ncu,
1060 NWAM_FLAG_KNOWN_WLAN_WALK_PRIORITY_ORDER, &ret);
1061
1062 return (ret == 1);
1063 }
1064
1065 /*
1066 * WLAN scan code for WIFI link NCUs.
1067 */
1068
1069 /* Create periodic scan event for object. Called with object lock held. */
1070 void
nwamd_ncu_create_periodic_scan_event(nwamd_object_t ncu_obj)1071 nwamd_ncu_create_periodic_scan_event(nwamd_object_t ncu_obj)
1072 {
1073 nwamd_event_t scan_event;
1074
1075 if (wireless_scan_interval == 0) {
1076 nlog(LOG_DEBUG, "nwamd_ncu_create_periodic_scan_event: "
1077 "wireless_scan_interval set to 0 so no periodic scanning");
1078 return;
1079 }
1080 scan_event = nwamd_event_init(NWAM_EVENT_TYPE_PERIODIC_SCAN,
1081 NWAM_OBJECT_TYPE_NCU, 0, ncu_obj->nwamd_object_name);
1082 if (scan_event != NULL) {
1083 nwamd_event_enqueue_timed(scan_event,
1084 wireless_scan_interval > WIRELESS_SCAN_INTERVAL_MIN ?
1085 wireless_scan_interval : WIRELESS_SCAN_INTERVAL_MIN);
1086 }
1087 }
1088
1089 /* Handle periodic scan event (which puts link into WIFI_INIT state */
1090 void
nwamd_ncu_handle_periodic_scan_event(nwamd_event_t event)1091 nwamd_ncu_handle_periodic_scan_event(nwamd_event_t event)
1092 {
1093 nwamd_object_t ncu_obj;
1094 nwamd_ncu_t *ncu;
1095
1096 ncu_obj = nwamd_object_find(NWAM_OBJECT_TYPE_NCU,
1097 event->event_object);
1098 if (ncu_obj == NULL) {
1099 nlog(LOG_ERR, "nwamd_ncu_handle_periodic_scan_event: "
1100 "no object %s", event->event_object);
1101 return;
1102 }
1103 ncu = ncu_obj->nwamd_object_data;
1104
1105 /* Only rescan if state is offline* or online */
1106 nlog(LOG_DEBUG, "nwamd_ncu_handle_periodic_scan_event: doing rescan..");
1107
1108 if (ncu_obj->nwamd_object_state == NWAM_STATE_OFFLINE_TO_ONLINE ||
1109 ncu_obj->nwamd_object_state == NWAM_STATE_ONLINE) {
1110 /* rescan, then create periodic scan event */
1111 (void) nwamd_wlan_scan(ncu->ncu_name);
1112 nwamd_ncu_create_periodic_scan_event(ncu_obj);
1113 }
1114 nwamd_object_release(ncu_obj);
1115 }
1116
1117 static boolean_t
get_scan_results(void * arg,dladm_wlan_attr_t * attrp)1118 get_scan_results(void *arg, dladm_wlan_attr_t *attrp)
1119 {
1120 nwamd_wifi_scan_t *s = arg;
1121 const char *linkname = s->nwamd_wifi_scan_link;
1122 char essid_name[DLADM_STRSIZE];
1123 char bssid_name[DLADM_STRSIZE];
1124 char strength[DLADM_STRSIZE];
1125 uint_t i, index = 0;
1126 boolean_t found = B_FALSE;
1127
1128 (void) dladm_wlan_essid2str(&attrp->wa_essid, essid_name);
1129 (void) dladm_wlan_bssid2str(&attrp->wa_bssid, bssid_name);
1130 (void) dladm_wlan_strength2str(&attrp->wa_strength, strength);
1131
1132 index = s->nwamd_wifi_scan_curr_num;
1133 if (index == NWAMD_MAX_NUM_WLANS) {
1134 nlog(LOG_ERR, "get_scan_results: truncating WLAN scan results "
1135 "for link %s: ommiting (%s, %s)", linkname, essid_name,
1136 bssid_name);
1137 return (B_TRUE);
1138 }
1139
1140 (void) strlcpy(s->nwamd_wifi_scan_curr[index].nww_essid, essid_name,
1141 sizeof (s->nwamd_wifi_scan_curr[index].nww_essid));
1142 (void) strlcpy(s->nwamd_wifi_scan_curr[index].nww_bssid, bssid_name,
1143 sizeof (s->nwamd_wifi_scan_curr[index].nww_bssid));
1144 (void) strlcpy(s->nwamd_wifi_scan_curr[index].nww_signal_strength,
1145 strength,
1146 sizeof (s->nwamd_wifi_scan_curr[index].nww_signal_strength));
1147 s->nwamd_wifi_scan_curr[index].nww_security_mode = attrp->wa_secmode;
1148 s->nwamd_wifi_scan_curr[index].nww_speed = attrp->wa_speed;
1149 s->nwamd_wifi_scan_curr[index].nww_channel = attrp->wa_channel;
1150 s->nwamd_wifi_scan_curr[index].nww_bsstype = attrp->wa_bsstype;
1151
1152 /*
1153 * We fill in actual values for selected/connected/key later when we
1154 * reacquire the object lock.
1155 */
1156 s->nwamd_wifi_scan_curr[index].nww_selected = B_FALSE;
1157 s->nwamd_wifi_scan_curr[index].nww_connected = B_FALSE;
1158 s->nwamd_wifi_scan_curr[index].nww_have_key = B_FALSE;
1159 s->nwamd_wifi_scan_curr[index].nww_keyindex = 1;
1160 s->nwamd_wifi_scan_curr_num++;
1161
1162 /* Check if this AP was in previous scan results */
1163 for (i = 0; i < s->nwamd_wifi_scan_last_num; i++) {
1164 found = (strcmp(s->nwamd_wifi_scan_last[i].nww_essid,
1165 essid_name) == 0 &&
1166 strcmp(s->nwamd_wifi_scan_last[i].nww_bssid,
1167 bssid_name) == 0);
1168 if (found)
1169 break;
1170 }
1171 if (!found)
1172 s->nwamd_wifi_scan_changed = B_TRUE;
1173
1174 nlog(LOG_DEBUG, "get_scan_results(%s, %d): ESSID %s, BSSID %s",
1175 linkname, index, essid_name, bssid_name);
1176
1177 return (B_TRUE);
1178 }
1179
1180 /*
1181 * Check if we're connected to the expected WLAN, or in the case of autoconf
1182 * record the WLAN we're connected to.
1183 */
1184 boolean_t
nwamd_wlan_connected(nwamd_object_t ncu_obj)1185 nwamd_wlan_connected(nwamd_object_t ncu_obj)
1186 {
1187 nwamd_ncu_t *ncu = ncu_obj->nwamd_object_data;
1188 nwamd_link_t *link = &ncu->ncu_link;
1189 dladm_wlan_linkattr_t attr;
1190 char essid[DLADM_STRSIZE];
1191 char bssid[DLADM_STRSIZE];
1192 boolean_t connected = B_FALSE;
1193 int retries = 0;
1194
1195 /*
1196 * This is awful, but some wireless drivers
1197 * (particularly 'ath') will erroneously report
1198 * "disconnected" if queried right after a scan. If we
1199 * see 'down' reported here, we retry a few times to
1200 * make sure it's really down.
1201 */
1202 while (retries++ < 4) {
1203 if (dladm_wlan_get_linkattr(dld_handle, link->nwamd_link_id,
1204 &attr) != DLADM_STATUS_OK) {
1205 attr.la_status = DLADM_WLAN_LINK_DISCONNECTED;
1206 } else if (attr.la_status == DLADM_WLAN_LINK_CONNECTED) {
1207 break;
1208 }
1209 }
1210
1211 if (attr.la_status == DLADM_WLAN_LINK_CONNECTED) {
1212 (void) dladm_wlan_essid2str(&attr.la_wlan_attr.wa_essid, essid);
1213 (void) dladm_wlan_bssid2str(&attr.la_wlan_attr.wa_bssid, bssid);
1214 connected = B_TRUE;
1215 nlog(LOG_DEBUG, "nwamd_wlan_connected: %s connected to %s %s",
1216 ncu->ncu_name, essid, bssid);
1217 } else {
1218 return (B_FALSE);
1219 }
1220 /*
1221 * If we're using autoconf, we have no control over what we connect to,
1222 * so rather than verifying ESSSID, simply record ESSID/BSSID.
1223 */
1224 if (link->nwamd_link_wifi_autoconf) {
1225 (void) strlcpy(link->nwamd_link_wifi_essid, essid,
1226 sizeof (link->nwamd_link_wifi_essid));
1227 (void) strlcpy(link->nwamd_link_wifi_bssid, bssid,
1228 sizeof (link->nwamd_link_wifi_bssid));
1229 }
1230 /*
1231 * Are we connected to expected WLAN? Note:
1232 * we'd like to verify BSSID, but we cannot due to CR 6772510.
1233 */
1234 if (strcmp(essid, link->nwamd_link_wifi_essid) == 0) {
1235 /* Update connected signal strength */
1236 (void) dladm_wlan_strength2str(&attr.la_wlan_attr.wa_strength,
1237 link->nwamd_link_wifi_signal_strength);
1238
1239 /* Store current BSSID */
1240 (void) strlcpy(link->nwamd_link_wifi_bssid, bssid,
1241 sizeof (link->nwamd_link_wifi_bssid));
1242
1243 if (attr.la_wlan_attr.wa_strength < wireless_scan_level) {
1244 /*
1245 * We're connected, but we've dropped below
1246 * scan threshold. Initiate a scan.
1247 */
1248 nlog(LOG_DEBUG, "nwamd_wlan_connected: "
1249 "connected but signal under threshold...");
1250 (void) nwamd_wlan_scan(ncu->ncu_name);
1251 }
1252 return (connected);
1253 } else if (strlen(essid) == 0) {
1254 /*
1255 * For hidden WLANs, no ESSID is specified, so we cannot verify
1256 * WLAN name.
1257 */
1258 nlog(LOG_DEBUG,
1259 "nwamd_wlan_connected: connected to hidden WLAN, cannot "
1260 "verify connection details");
1261 return (connected);
1262 } else {
1263 (void) nlog(LOG_ERR,
1264 "nwamd_wlan_connected: wrong AP on %s; expected %s %s",
1265 ncu->ncu_name, link->nwamd_link_wifi_essid,
1266 link->nwamd_link_wifi_bssid);
1267 (void) dladm_wlan_disconnect(dld_handle, link->nwamd_link_id);
1268 link->nwamd_link_wifi_connected = B_FALSE;
1269 return (B_FALSE);
1270 }
1271 }
1272
1273 /*
1274 * WLAN scan thread. Called with the per-link WiFi mutex held.
1275 */
1276 static void *
wlan_scan_thread(void * arg)1277 wlan_scan_thread(void *arg)
1278 {
1279 char *linkname = arg;
1280 nwamd_object_t ncu_obj;
1281 nwamd_ncu_t *ncu;
1282 nwamd_link_t *link;
1283 dladm_status_t status;
1284 char essid[DLADM_STRSIZE];
1285 char bssid[DLADM_STRSIZE];
1286 uint32_t now, link_id;
1287 nwamd_wifi_scan_t s;
1288 int i;
1289
1290 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
1291 == NULL) {
1292 nlog(LOG_ERR, "wlan_scan_thread: could not find object "
1293 "for link %s", linkname);
1294 free(linkname);
1295 return (NULL);
1296 }
1297
1298 ncu = ncu_obj->nwamd_object_data;
1299 link = &ncu->ncu_link;
1300
1301 /*
1302 * It is possible multiple scan threads have queued up waiting for the
1303 * object lock. We try to prevent excessive scanning by limiting the
1304 * interval between scans to WIRELESS_SCAN_REQUESTED_INTERVAL_MIN sec.
1305 */
1306 now = NSEC_TO_SEC(gethrtime());
1307 if ((now - link->nwamd_link_wifi_scan.nwamd_wifi_scan_last_time) <
1308 WIRELESS_SCAN_REQUESTED_INTERVAL_MIN) {
1309 nlog(LOG_DEBUG, "wlan_scan_thread: last scan for %s "
1310 "was < %d sec ago, ignoring scan request",
1311 linkname, WIRELESS_SCAN_REQUESTED_INTERVAL_MIN);
1312 nwamd_object_release(ncu_obj);
1313 free(linkname);
1314 return (NULL);
1315 }
1316
1317 /*
1318 * Prepare scan data - copy link name and copy previous "current"
1319 * scan results from the nwamd_link_t to the last scan results for
1320 * the next scan so that we can compare results to find if things
1321 * have changed since last time.
1322 */
1323 (void) bzero(&s, sizeof (nwamd_wifi_scan_t));
1324 (void) strlcpy(s.nwamd_wifi_scan_link, ncu->ncu_name,
1325 sizeof (s.nwamd_wifi_scan_link));
1326 s.nwamd_wifi_scan_last_num =
1327 link->nwamd_link_wifi_scan.nwamd_wifi_scan_curr_num;
1328 if (s.nwamd_wifi_scan_last_num > 0) {
1329 (void) memcpy(s.nwamd_wifi_scan_last,
1330 link->nwamd_link_wifi_scan.nwamd_wifi_scan_curr,
1331 s.nwamd_wifi_scan_last_num * sizeof (nwam_wlan_t));
1332 }
1333 link_id = link->nwamd_link_id;
1334 nwamd_object_release(ncu_obj);
1335
1336 nlog(LOG_DEBUG, "wlan_scan_thread: initiating scan on %s",
1337 s.nwamd_wifi_scan_link);
1338
1339 scanconnect_entry();
1340 status = dladm_wlan_scan(dld_handle, link_id, &s, get_scan_results);
1341 s.nwamd_wifi_scan_last_time = NSEC_TO_SEC(gethrtime());
1342 if (!s.nwamd_wifi_scan_changed) {
1343 /* Scan may have lost WLANs, if so this qualifies as change */
1344 s.nwamd_wifi_scan_changed = (s.nwamd_wifi_scan_curr_num !=
1345 s.nwamd_wifi_scan_last_num);
1346 }
1347 scanconnect_exit();
1348
1349 if (status != DLADM_STATUS_OK) {
1350 nlog(LOG_ERR, "wlan_scan_thread: cannot scan link %s",
1351 s.nwamd_wifi_scan_link);
1352 free(linkname);
1353 return (NULL);
1354 }
1355
1356 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
1357 == NULL) {
1358 nlog(LOG_ERR, "wlan_scan_thread: could not find object "
1359 "for link %s after doing scan", linkname);
1360 free(linkname);
1361 return (NULL);
1362 }
1363 ncu = ncu_obj->nwamd_object_data;
1364 link = &ncu->ncu_link;
1365
1366 /* For new scan data, add key info from known WLANs */
1367 for (i = 0; i < s.nwamd_wifi_scan_curr_num; i++) {
1368 if (NEED_ENC(s.nwamd_wifi_scan_curr[i].nww_security_mode)) {
1369 char keyname[NWAM_MAX_VALUE_LEN];
1370 dladm_wlan_key_t *key = NULL;
1371
1372 /*
1373 * If strict_bssid is true, we start checking for
1374 * known wlans with the same BSSID.
1375 * This would prevent the selection of secobjs
1376 * that actually are referenced by different kwl
1377 * with the same ESSID.
1378 */
1379 if (wireless_strict_bssid) {
1380 int b_match = 0;
1381 (void) nwam_walk_known_wlans(bssid_match,
1382 s.nwamd_wifi_scan_curr[i].nww_bssid, 0,
1383 &b_match);
1384 if (b_match == 0)
1385 continue;
1386 }
1387
1388 if (known_wlan_get_keyname
1389 (s.nwamd_wifi_scan_curr[i].nww_essid, keyname)
1390 == NWAM_SUCCESS &&
1391 (key = nwamd_wlan_get_key_named(keyname,
1392 s.nwamd_wifi_scan_curr[i].nww_security_mode))
1393 != NULL) {
1394 s.nwamd_wifi_scan_curr[i].nww_have_key =
1395 B_TRUE;
1396 s.nwamd_wifi_scan_curr[i].nww_keyindex =
1397 s.nwamd_wifi_scan_curr[i].
1398 nww_security_mode ==
1399 DLADM_WLAN_SECMODE_WEP ?
1400 key->wk_idx : 1;
1401 nlog(LOG_DEBUG, "found matching keyname for \
1402 %s", s.nwamd_wifi_scan_curr[i].nww_bssid);
1403 free(key);
1404 }
1405 }
1406 }
1407 /* Copy scan data into nwamd_link_t */
1408 link->nwamd_link_wifi_scan = s;
1409 /* Set selected, connected and send scan event if we've got new data */
1410 nwamd_set_selected_connected(ncu,
1411 link->nwamd_link_wifi_essid[0] != '\0',
1412 link->nwamd_link_wifi_connected);
1413
1414 /*
1415 * If wireless selection is not possible because of the current
1416 * state or priority-group, then this was just a scan request.
1417 * Nothing else to do.
1418 */
1419 if (!wireless_selection_possible(ncu_obj)) {
1420 nwamd_object_release(ncu_obj);
1421 free(linkname);
1422 return (NULL);
1423 }
1424
1425 /*
1426 * Check if WLAN is on our known WLAN list. If no
1427 * previously-visited WLANs are found in scan data, set
1428 * new state to NEED_SELECTION (provided we're not currently
1429 * connected, as can be the case during a periodic scan or
1430 * monitor-triggered scan where the signal strength recovers.
1431 */
1432 if (!nwamd_find_known_wlan(ncu_obj)) {
1433 if (!nwamd_wlan_connected(ncu_obj)) {
1434 if (link->nwamd_link_wifi_connected) {
1435 nlog(LOG_DEBUG, "wlan_scan_thread: "
1436 "unexpected disconnect after scan");
1437 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1438 ncu_obj->nwamd_object_name,
1439 NWAM_STATE_ONLINE_TO_OFFLINE,
1440 NWAM_AUX_STATE_DOWN);
1441 } else {
1442 nlog(LOG_DEBUG, "wlan_scan_thread: "
1443 "no known WLANs - ask user");
1444 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1445 ncu_obj->nwamd_object_name,
1446 NWAM_STATE_OFFLINE_TO_ONLINE,
1447 NWAM_AUX_STATE_LINK_WIFI_NEED_SELECTION);
1448 }
1449 } else {
1450 /* still connected. if not online, change to online */
1451 nlog(LOG_DEBUG, "wlan_scan_thread: still connected to "
1452 "%s %s", link->nwamd_link_wifi_essid,
1453 link->nwamd_link_wifi_bssid);
1454 if (ncu_obj->nwamd_object_state != NWAM_STATE_ONLINE) {
1455 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1456 ncu_obj->nwamd_object_name,
1457 NWAM_STATE_OFFLINE_TO_ONLINE,
1458 NWAM_AUX_STATE_UP);
1459 }
1460 }
1461 nwamd_object_release(ncu_obj);
1462
1463 } else {
1464 nlog(LOG_DEBUG, "wlan_scan_thread: found known WLAN %s %s",
1465 link->nwamd_link_wifi_essid, link->nwamd_link_wifi_bssid);
1466
1467 if (!nwamd_wlan_connected(ncu_obj)) {
1468 /* Copy selected ESSID/BSSID, unlock, call select */
1469 (void) strlcpy(essid, link->nwamd_link_wifi_essid,
1470 sizeof (essid));
1471 (void) strlcpy(bssid, link->nwamd_link_wifi_bssid,
1472 sizeof (bssid));
1473 nwamd_object_release(ncu_obj);
1474 (void) nwamd_wlan_select(linkname, essid, bssid,
1475 link->nwamd_link_wifi_security_mode, B_TRUE);
1476 } else {
1477 /* still connected. if not online, change to online */
1478 nlog(LOG_DEBUG, "wlan_scan_thread: still connected to "
1479 "known WLAN %s %s", link->nwamd_link_wifi_essid,
1480 link->nwamd_link_wifi_bssid);
1481 if (ncu_obj->nwamd_object_state != NWAM_STATE_ONLINE) {
1482 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1483 ncu_obj->nwamd_object_name,
1484 NWAM_STATE_OFFLINE_TO_ONLINE,
1485 NWAM_AUX_STATE_UP);
1486 }
1487 nwamd_object_release(ncu_obj);
1488 }
1489 }
1490 free(linkname);
1491 return (NULL);
1492 }
1493
1494 nwam_error_t
nwamd_wlan_scan(const char * linkname)1495 nwamd_wlan_scan(const char *linkname)
1496 {
1497 pthread_t wifi_thread;
1498 char *link = strdup(linkname);
1499
1500 if (link == NULL) {
1501 nlog(LOG_ERR, "nwamd_wlan_scan: out of memory");
1502 return (NWAM_NO_MEMORY);
1503 }
1504
1505 nlog(LOG_DEBUG, "nwamd_wlan_scan: WLAN scan for %s",
1506 link);
1507
1508 if (pthread_create(&wifi_thread, NULL, wlan_scan_thread,
1509 link) != 0) {
1510 nlog(LOG_ERR, "nwamd_wlan_scan: could not start scan");
1511 free(link);
1512 return (NWAM_ERROR_INTERNAL);
1513 }
1514 /* detach thread so that it doesn't become a zombie */
1515 (void) pthread_detach(wifi_thread);
1516 return (NWAM_SUCCESS);
1517 }
1518
1519 /*
1520 * WLAN connection code.
1521 */
1522
1523 static dladm_status_t
do_connect(uint32_t link_id,dladm_wlan_attr_t * attrp,dladm_wlan_key_t * key,uint_t keycount,uint_t flags)1524 do_connect(uint32_t link_id, dladm_wlan_attr_t *attrp, dladm_wlan_key_t *key,
1525 uint_t keycount, uint_t flags)
1526 {
1527 dladm_status_t status;
1528 char errmsg[DLADM_STRSIZE];
1529
1530 scanconnect_entry();
1531 status = dladm_wlan_connect(dld_handle, link_id, attrp,
1532 DLADM_WLAN_CONNECT_TIMEOUT_DEFAULT, key, keycount, flags);
1533 scanconnect_exit();
1534
1535 nlog(LOG_DEBUG, "nwamd_do_connect: dladm_wlan_connect returned %s",
1536 dladm_status2str(status, errmsg));
1537
1538 return (status);
1539 }
1540
1541 static void *
wlan_connect_thread(void * arg)1542 wlan_connect_thread(void *arg)
1543 {
1544 char *linkname = arg;
1545 nwamd_object_t ncu_obj;
1546 nwamd_ncu_t *ncu;
1547 nwamd_link_t *link;
1548 nwam_error_t err;
1549 uint_t keycount;
1550 uint32_t link_id;
1551 dladm_wlan_key_t *key = NULL;
1552 dladm_wlan_attr_t attr;
1553 dladm_status_t status;
1554 boolean_t autoconf = B_FALSE;
1555
1556 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
1557 == NULL) {
1558 nlog(LOG_ERR, "wlan_connect_thread: could not find object "
1559 "for link %s", linkname);
1560 free(linkname);
1561 return (NULL);
1562 }
1563
1564 ncu = ncu_obj->nwamd_object_data;
1565 link = &ncu->ncu_link;
1566
1567 if (!wireless_selection_possible(ncu_obj)) {
1568 nlog(LOG_DEBUG, "wlan_connect_thread: %s in invalid state or "
1569 "has lower priority", ncu->ncu_name);
1570 goto done;
1571 }
1572
1573 /* If it is already connected to the required AP, just return. */
1574 if (nwamd_wlan_connected(ncu_obj)) {
1575 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1576 ncu_obj->nwamd_object_name,
1577 ncu_obj->nwamd_object_state, NWAM_AUX_STATE_UP);
1578 goto done;
1579 }
1580
1581 (void) memset(&attr, 0, sizeof (attr));
1582 if (dladm_wlan_str2essid(link->nwamd_link_wifi_essid, &attr.wa_essid)
1583 != DLADM_STATUS_OK) {
1584 nlog(LOG_ERR, "wlan_connect_thread: invalid ESSID '%s' "
1585 "for '%s'", link->nwamd_link_wifi_essid, ncu->ncu_name);
1586 goto done;
1587 }
1588 attr.wa_valid = DLADM_WLAN_ATTR_ESSID;
1589
1590 /* note: bssid logic here is non-functional */
1591 if (link->nwamd_link_wifi_bssid[0] != '\0') {
1592 if (dladm_wlan_str2bssid(link->nwamd_link_wifi_bssid,
1593 &attr.wa_bssid) != DLADM_STATUS_OK) {
1594 nlog(LOG_ERR, "wlan_connect_thread: invalid BSSID '%s'",
1595 "for '%s'", link->nwamd_link_wifi_bssid,
1596 ncu->ncu_name);
1597 } else {
1598 attr.wa_valid |= DLADM_WLAN_ATTR_BSSID;
1599 }
1600 }
1601
1602 /* First check for the key */
1603 if (NEED_ENC(link->nwamd_link_wifi_security_mode)) {
1604 if (link->nwamd_link_wifi_key == NULL) {
1605 nlog(LOG_ERR, "wlan_connect_thread: could not find "
1606 "key for WLAN '%s'", link->nwamd_link_wifi_essid);
1607 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1608 ncu_obj->nwamd_object_name,
1609 NWAM_STATE_OFFLINE_TO_ONLINE,
1610 NWAM_AUX_STATE_LINK_WIFI_NEED_KEY);
1611 goto done;
1612 }
1613 /* Make a copy of the key as we need to unlock the object */
1614 if ((key = calloc(1, sizeof (dladm_wlan_key_t))) == NULL) {
1615 nlog(LOG_ERR, "wlan_connect_thread: out of memory");
1616 goto done;
1617 }
1618 (void) memcpy(key, link->nwamd_link_wifi_key,
1619 sizeof (dladm_wlan_key_t));
1620
1621 attr.wa_valid |= DLADM_WLAN_ATTR_SECMODE;
1622 attr.wa_secmode = link->nwamd_link_wifi_security_mode;
1623 keycount = 1;
1624 nlog(LOG_DEBUG, "wlan_connect_thread: retrieved key");
1625 } else {
1626 key = NULL;
1627 keycount = 0;
1628 }
1629
1630 /*
1631 * Connect; only scan if a bssid was not specified. If it times out,
1632 * try a second time using autoconf. Drop the object lock during the
1633 * connect attempt since connecting may take some time, and access to
1634 * the link object during that period would be impossible if we held the
1635 * lock.
1636 */
1637
1638 link->nwamd_link_wifi_autoconf = B_FALSE;
1639 link_id = link->nwamd_link_id;
1640
1641 nwamd_object_release(ncu_obj);
1642
1643 status = do_connect(link_id, &attr, key, keycount,
1644 DLADM_WLAN_CONNECT_NOSCAN);
1645 if (status != DLADM_STATUS_OK) {
1646 /* Connect failed, try autoconf */
1647 if (!wireless_autoconf || (status = do_connect(link_id, &attr,
1648 NULL, 0, 0)) != DLADM_STATUS_OK) {
1649 nlog(LOG_ERR, "wlan_connect_thread: connect failed for "
1650 "%s", linkname);
1651 goto done_unlocked;
1652 }
1653 if (status == DLADM_STATUS_OK)
1654 autoconf = B_TRUE;
1655 }
1656
1657 /* Connect succeeded, reacquire object */
1658 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK, linkname))
1659 == NULL) {
1660 nlog(LOG_ERR, "wlan_connect_thread: could not find object "
1661 "for link %s", linkname);
1662 goto done_unlocked;
1663 }
1664
1665 ncu = ncu_obj->nwamd_object_data;
1666 link = &ncu->ncu_link;
1667
1668 if (autoconf)
1669 link->nwamd_link_wifi_autoconf = B_TRUE;
1670
1671 /*
1672 * If WLAN is WEP/WPA, we would like to test the connection as the key
1673 * may be wrong. It is difficult to find a reliable test that works
1674 * across APs however. Do nothing for now.
1675 */
1676 link->nwamd_link_wifi_connected = nwamd_wlan_connected(ncu_obj);
1677
1678 if (link->nwamd_link_wifi_connected) {
1679 if (link->nwamd_link_wifi_add_to_known_wlans) {
1680 /* add to known WLANs */
1681 nlog(LOG_DEBUG, "wlan_connect_thread: "
1682 "add '%s' to known WLANs",
1683 link->nwamd_link_wifi_essid);
1684 if ((err = nwam_known_wlan_add_to_known_wlans
1685 (link->nwamd_link_wifi_essid,
1686 link->nwamd_link_wifi_bssid[0] != '\0' ?
1687 link->nwamd_link_wifi_bssid : NULL,
1688 link->nwamd_link_wifi_security_mode,
1689 link->nwamd_link_wifi_security_mode ==
1690 DLADM_WLAN_SECMODE_WEP ?
1691 (uint_t)link->nwamd_link_wifi_key->wk_idx : 1,
1692 NEED_ENC(link->nwamd_link_wifi_security_mode) ?
1693 link->nwamd_link_wifi_keyname : NULL))
1694 != NWAM_SUCCESS) {
1695 nlog(LOG_ERR, "wlan_connect_thread: "
1696 "could not add to known WLANs: %s",
1697 nwam_strerror(err));
1698 }
1699 }
1700 nwamd_set_selected_connected(ncu, B_TRUE, B_TRUE);
1701 nlog(LOG_DEBUG, "wlan_connect_thread: connect "
1702 "succeeded, setting state online");
1703 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1704 ncu_obj->nwamd_object_name, NWAM_STATE_ONLINE,
1705 NWAM_AUX_STATE_UP);
1706 }
1707
1708 done:
1709 nwamd_object_release(ncu_obj);
1710 done_unlocked:
1711 free(linkname);
1712 free(key);
1713
1714 return (NULL);
1715 }
1716
1717 void
nwamd_wlan_connect(const char * linkname)1718 nwamd_wlan_connect(const char *linkname)
1719 {
1720 pthread_t wifi_thread;
1721 char *link = strdup(linkname);
1722
1723 if (link == NULL) {
1724 nlog(LOG_ERR, "nwamd_wlan_connect: out of memory");
1725 return;
1726 }
1727
1728 nlog(LOG_DEBUG, "nwamd_wlan_connect: WLAN connect for %s",
1729 link);
1730
1731 if (pthread_create(&wifi_thread, NULL, wlan_connect_thread, link) != 0)
1732 nlog(LOG_ERR, "nwamd_wlan_connect: could not start connect");
1733
1734 /* detach thread so that it doesn't become a zombie */
1735 (void) pthread_detach(wifi_thread);
1736 }
1737
1738 /*
1739 * Launch signal strength-monitoring thread which periodically
1740 * checks connection and signal strength. If we become disconnected
1741 * or signal drops below threshold specified by wireless_scan_level,
1742 * initiate a scan. The scan initiation is taken care of by
1743 * the call to nwamd_wlan_connected().
1744 */
1745 static void *
wlan_monitor_signal_thread(void * arg)1746 wlan_monitor_signal_thread(void *arg)
1747 {
1748 char *linkname = arg;
1749 nwamd_object_t ncu_obj;
1750 nwamd_ncu_t *ncu;
1751 nwamd_link_t *link;
1752 boolean_t first_time = B_TRUE;
1753
1754 for (;;) {
1755 if ((ncu_obj = nwamd_ncu_object_find(NWAM_NCU_TYPE_LINK,
1756 linkname)) == NULL) {
1757 nlog(LOG_ERR, "wlan_monitor_signal_thread: could "
1758 "not find object for link %s", linkname);
1759 break;
1760 }
1761 ncu = ncu_obj->nwamd_object_data;
1762 link = &ncu->ncu_link;
1763
1764 /* If the NCU is DISABLED/OFFLINE, exit the monitoring thread */
1765 if (ncu_obj->nwamd_object_state == NWAM_STATE_OFFLINE ||
1766 ncu_obj->nwamd_object_state == NWAM_STATE_DISABLED) {
1767 nlog(LOG_INFO, "wlan_monitor_signal_thread: "
1768 "%s is %s, stopping thread", linkname,
1769 nwam_state_to_string(ncu_obj->nwamd_object_state));
1770 link->nwamd_link_wifi_monitor_thread = 0;
1771 nwamd_object_release(ncu_obj);
1772 break;
1773 }
1774
1775 /*
1776 * First time thru loop, we check if there is another
1777 * link monitoring thread in operation - if so exit this
1778 * thread.
1779 */
1780 if (first_time) {
1781 first_time = B_FALSE;
1782
1783 if (link->nwamd_link_wifi_monitor_thread != 0) {
1784 /* Already have a monitor thread for link? */
1785 nwamd_object_release(ncu_obj);
1786 break;
1787 } else {
1788 link->nwamd_link_wifi_monitor_thread =
1789 pthread_self();
1790 }
1791 }
1792 if (!nwamd_wlan_connected(ncu_obj)) {
1793 nlog(LOG_ERR, "wlan_monitor_signal_thread: "
1794 "disconnect occured for WLAN on link %s", linkname);
1795 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1796 ncu_obj->nwamd_object_name,
1797 NWAM_STATE_ONLINE_TO_OFFLINE,
1798 NWAM_AUX_STATE_DOWN);
1799 link->nwamd_link_wifi_monitor_thread = 0;
1800 nwamd_object_release(ncu_obj);
1801 break;
1802 }
1803 nwamd_object_release(ncu_obj);
1804 (void) sleep(WIRELESS_MONITOR_SIGNAL_INTERVAL);
1805 }
1806 free(linkname);
1807
1808 return (NULL);
1809 }
1810
1811 void
nwamd_wlan_monitor_signal(const char * linkname)1812 nwamd_wlan_monitor_signal(const char *linkname)
1813 {
1814 pthread_t wifi_thread;
1815 char *link = strdup(linkname);
1816
1817 if (link == NULL) {
1818 nlog(LOG_ERR, "nwamd_wlan_monitor_signal: out of memory");
1819 return;
1820 }
1821
1822 nlog(LOG_DEBUG, "nwamd_wlan_monitor_signal: WLAN monitor for %s",
1823 link);
1824
1825 if (pthread_create(&wifi_thread, NULL, wlan_monitor_signal_thread,
1826 link) != 0) {
1827 nlog(LOG_ERR, "nwamd_wlan_monitor_signal: could not monitor "
1828 "link %s", link);
1829 free(link);
1830 return;
1831 }
1832
1833 /* detach thread so that it doesn't become a zombie */
1834 (void) pthread_detach(wifi_thread);
1835 }
1836
1837 void
nwamd_ncu_handle_link_state_event(nwamd_event_t event)1838 nwamd_ncu_handle_link_state_event(nwamd_event_t event)
1839 {
1840 nwam_event_t evm;
1841 nwamd_object_t ncu_obj;
1842 nwamd_ncu_t *ncu;
1843 nwamd_link_t *link;
1844
1845 ncu_obj = nwamd_object_find(NWAM_OBJECT_TYPE_NCU, event->event_object);
1846 if (ncu_obj == NULL) {
1847 nlog(LOG_INFO, "nwamd_ncu_handle_link_state_event: no object "
1848 "%s", event->event_object);
1849 nwamd_event_do_not_send(event);
1850 return;
1851 }
1852 ncu = ncu_obj->nwamd_object_data;
1853 link = &ncu->ncu_link;
1854 evm = event->event_msg;
1855
1856 /*
1857 * We ignore link state events for WiFi because it is very flaky.
1858 * Instead we use the monitor thread and drive WiFi state changes from
1859 * there.
1860 */
1861 if (link->nwamd_link_media == DL_WIFI) {
1862 nwamd_object_release(ncu_obj);
1863 return;
1864 }
1865
1866 /*
1867 * If it's a link up event and we're not disabled, go online.
1868 */
1869 if (evm->nwe_data.nwe_link_state.nwe_link_up &&
1870 ncu_obj->nwamd_object_state != NWAM_STATE_DISABLED) {
1871
1872 if (link->nwamd_link_activation_mode ==
1873 NWAM_ACTIVATION_MODE_PRIORITIZED) {
1874 int64_t priority_group;
1875
1876 (void) pthread_mutex_lock(&active_ncp_mutex);
1877 priority_group = current_ncu_priority_group;
1878 (void) pthread_mutex_unlock(&active_ncp_mutex);
1879
1880 /* compare priority groups */
1881 if (link->nwamd_link_priority_group > priority_group) {
1882 nlog(LOG_DEBUG,
1883 "nwamd_ncu_handle_link_state_event: "
1884 "got LINK UP event for priority group "
1885 "%lld, less preferred than current %lld, "
1886 "ignoring",
1887 link->nwamd_link_priority_group,
1888 priority_group);
1889
1890 } else if (link->nwamd_link_priority_group ==
1891 priority_group) {
1892 nlog(LOG_DEBUG,
1893 "nwamd_ncu_handle_link_state_event: "
1894 "got LINK UP event for priority group "
1895 "%lld, same as current %lld",
1896 link->nwamd_link_priority_group,
1897 priority_group);
1898 /*
1899 * Change link state to UP. It will be
1900 * propagated to IP state machine. Only do
1901 * the NCU check if and when the interface
1902 * NCU is online.
1903 */
1904 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1905 event->event_object,
1906 NWAM_STATE_OFFLINE_TO_ONLINE,
1907 NWAM_AUX_STATE_UP);
1908 } else {
1909 nlog(LOG_DEBUG,
1910 "nwamd_ncu_handle_link_state_event: "
1911 "got LINK UP event for priority group "
1912 "%lld, more preferred than current %lld",
1913 link->nwamd_link_priority_group,
1914 priority_group);
1915
1916 /*
1917 * We need to mark the link as up so that when
1918 * it is activated we will bring the interface
1919 * up.
1920 */
1921 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1922 event->event_object,
1923 NWAM_STATE_OFFLINE_TO_ONLINE,
1924 NWAM_AUX_STATE_UP);
1925 nwamd_object_release(ncu_obj);
1926 nwamd_ncp_deactivate_priority_group
1927 (priority_group);
1928 nwamd_ncp_activate_priority_group
1929 (link->nwamd_link_priority_group);
1930 return;
1931 }
1932
1933 } else if (link->nwamd_link_activation_mode ==
1934 NWAM_ACTIVATION_MODE_MANUAL) {
1935 nlog(LOG_DEBUG, "nwamd_ncu_handle_link_state_event: "
1936 "got LINK UP event for manual NCU %s",
1937 ncu_obj->nwamd_object_name);
1938
1939 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1940 event->event_object, NWAM_STATE_OFFLINE_TO_ONLINE,
1941 NWAM_AUX_STATE_UP);
1942 }
1943 }
1944
1945 /*
1946 * If the link is down then start or continue transition down.
1947 */
1948 if (!evm->nwe_data.nwe_link_state.nwe_link_up &&
1949 (ncu_obj->nwamd_object_state == NWAM_STATE_ONLINE ||
1950 ncu_obj->nwamd_object_state == NWAM_STATE_OFFLINE_TO_ONLINE)) {
1951
1952 if (link->nwamd_link_activation_mode ==
1953 NWAM_ACTIVATION_MODE_PRIORITIZED) {
1954 nlog(LOG_DEBUG,
1955 "nwamd_ncu_handle_link_state_event: "
1956 "got LINK DOWN for priority group %lld",
1957 link->nwamd_link_priority_group);
1958 /* Moving to offline checks priority group */
1959 } else {
1960 nlog(LOG_DEBUG, "nwamd_ncu_handle_link_state_event: "
1961 "got LINK DOWN event for manual NCU %s",
1962 ncu_obj->nwamd_object_name);
1963 }
1964 nwamd_object_set_state(NWAM_OBJECT_TYPE_NCU,
1965 event->event_object, NWAM_STATE_ONLINE_TO_OFFLINE,
1966 NWAM_AUX_STATE_DOWN);
1967 }
1968
1969 nwamd_object_release(ncu_obj);
1970 }
1971