xref: /illumos-gate/usr/src/uts/common/io/mr_sas/fusion.h (revision 2ffc8bca2d4d633ffdea78ed925cd1ca63584844)
1 /*
2  * fusion.h
3  *
4  * Solaris MegaRAID device driver for SAS2.0 controllers
5  * Copyright (c) 2008-2012, LSI Logic Corporation.
6  * All rights reserved.
7  *
8  * Version:
9  * Author:
10  *		Swaminathan K S
11  *		Arun Chandrashekhar
12  *		Manju R
13  *		Rasheed
14  *		Shakeel Bukhari
15  */
16 
17 
18 #ifndef	_FUSION_H_
19 #define	_FUSION_H_
20 
21 #define	U64	uint64_t
22 #define	U32	uint32_t
23 #define	U16	uint16_t
24 #define	U8	uint8_t
25 #define	S8	char
26 #define	S16	short
27 #define	S32	int
28 
29 /* MPI2 defines */
30 #define	MPI2_REPLY_POST_HOST_INDEX_OFFSET	(0x6C)
31 #define	MPI2_FUNCTION_IOC_INIT			(0x02) /* IOC Init */
32 #define	MPI2_WHOINIT_HOST_DRIVER		(0x04)
33 #define	MPI2_VERSION_MAJOR			(0x02)
34 #define	MPI2_VERSION_MINOR			(0x00)
35 #define	MPI2_VERSION_MAJOR_MASK			(0xFF00)
36 #define	MPI2_VERSION_MAJOR_SHIFT		(8)
37 #define	MPI2_VERSION_MINOR_MASK			(0x00FF)
38 #define	MPI2_VERSION_MINOR_SHIFT		(0)
39 #define	MPI2_VERSION	((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
40 			MPI2_VERSION_MINOR)
41 #define	MPI2_HEADER_VERSION_UNIT		(0x10)
42 #define	MPI2_HEADER_VERSION_DEV			(0x00)
43 #define	MPI2_HEADER_VERSION_UNIT_MASK		(0xFF00)
44 #define	MPI2_HEADER_VERSION_UNIT_SHIFT		(8)
45 #define	MPI2_HEADER_VERSION_DEV_MASK		(0x00FF)
46 #define	MPI2_HEADER_VERSION_DEV_SHIFT		(0)
47 #define	MPI2_HEADER_VERSION			((MPI2_HEADER_VERSION_UNIT \
48 						<< 8) | \
49 						MPI2_HEADER_VERSION_DEV)
50 #define	MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR	(0x03)
51 #define	MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG	(0x8000)
52 #define	MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG	(0x0400)
53 #define	MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP	(0x0003)
54 #define	MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG	(0x0200)
55 #define	MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD	(0x0100)
56 #define	MPI2_SCSIIO_EEDPFLAGS_INSERT_OP		(0x0004)
57 #define	MPI2_FUNCTION_SCSI_IO_REQUEST		(0x00) /* SCSI IO */
58 #define	MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY	(0x06)
59 #define	MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO		(0x00)
60 #define	MPI2_SGE_FLAGS_64_BIT_ADDRESSING	(0x02)
61 #define	MPI2_SCSIIO_CONTROL_WRITE		(0x01000000)
62 #define	MPI2_SCSIIO_CONTROL_READ		(0x02000000)
63 #define	MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK	(0x0E)
64 #define	MPI2_RPY_DESCRIPT_FLAGS_UNUSED		(0x0F)
65 #define	MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS	(0x00)
66 #define	MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK	(0x0F)
67 #define	MPI2_WRSEQ_FLUSH_KEY_VALUE		(0x0)
68 #define	MPI2_WRITE_SEQUENCE_OFFSET		(0x00000004)
69 #define	MPI2_WRSEQ_1ST_KEY_VALUE		(0xF)
70 #define	MPI2_WRSEQ_2ND_KEY_VALUE		(0x4)
71 #define	MPI2_WRSEQ_3RD_KEY_VALUE		(0xB)
72 #define	MPI2_WRSEQ_4TH_KEY_VALUE		(0x2)
73 #define	MPI2_WRSEQ_5TH_KEY_VALUE		(0x7)
74 #define	MPI2_WRSEQ_6TH_KEY_VALUE		(0xD)
75 
76 /* Invader defines */
77 #define	MPI2_TYPE_CUDA					0x2
78 #define	MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH	0x4000
79 #define	MR_RL_FLAGS_GRANT_DESTINATION_CPU0			0x00
80 #define	MR_RL_FLAGS_GRANT_DESTINATION_CPU1			0x10
81 #define	MR_RL_FLAGS_GRANT_DESTINATION_CUDA			0x80
82 #define	MR_RL_FLAGS_SEQ_NUM_ENABLE					0x8
83 #define	MPI2_NSEG_FLAGS_SHIFT						4
84 
85 
86 #define	MR_PD_INVALID				0xFFFF
87 #define	MAX_SPAN_DEPTH				8
88 #define	MAX_RAIDMAP_SPAN_DEPTH			(MAX_SPAN_DEPTH)
89 #define	MAX_ROW_SIZE				32
90 #define	MAX_RAIDMAP_ROW_SIZE			(MAX_ROW_SIZE)
91 #define	MAX_LOGICAL_DRIVES			64
92 #define	MAX_RAIDMAP_LOGICAL_DRIVES		(MAX_LOGICAL_DRIVES)
93 #define	MAX_RAIDMAP_VIEWS			(MAX_LOGICAL_DRIVES)
94 #define	MAX_ARRAYS				128
95 #define	MAX_RAIDMAP_ARRAYS			(MAX_ARRAYS)
96 #define	MAX_PHYSICAL_DEVICES			256
97 #define	MAX_RAIDMAP_PHYSICAL_DEVICES		(MAX_PHYSICAL_DEVICES)
98 
99 /* get the mapping information of LD */
100 #define	MR_DCMD_LD_MAP_GET_INFO			0x0300e101
101 
102 #ifndef	MPI2_POINTER
103 #define	MPI2_POINTER	*
104 #endif
105 
106 #pragma pack(1)
107 
108 typedef struct _MPI25_IEEE_SGE_CHAIN64
109 {
110 	U64	Address;
111 	U32	Length;
112 	U16	Reserved1;
113 	U8	NextChainOffset;
114 	U8	Flags;
115 } MPI25_IEEE_SGE_CHAIN64, MPI2_POINTER PTR_MPI25_IEEE_SGE_CHAIN64,
116     Mpi25IeeeSgeChain64_t, MPI2_POINTER pMpi25IeeeSgeChain64_t;
117 
118 typedef struct _MPI2_SGE_SIMPLE_UNION
119 {
120 	U32	FlagsLength;
121 	union
122 	{
123 		U32	Address32;
124 		U64	Address64;
125 	} u1;
126 } MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
127     Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
128 
129 typedef struct
130 {
131 	U8	CDB[20];			/* 0x00 */
132 	U32	PrimaryReferenceTag;		/* 0x14 */
133 	U16	PrimaryApplicationTag;		/* 0x18 */
134 	U16	PrimaryApplicationTagMask;	/* 0x1A */
135 	U32	TransferLength;			/* 0x1C */
136 } MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
137     Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
138 
139 typedef struct _MPI2_SGE_CHAIN_UNION
140 {
141 	U16	Length;
142 	U8	NextChainOffset;
143 	U8	Flags;
144 	union
145 	{
146 		U32	Address32;
147 		U64	Address64;
148 	} u1;
149 } MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
150     Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
151 
152 typedef struct _MPI2_IEEE_SGE_SIMPLE32
153 {
154 	U32	Address;
155 	U32	FlagsLength;
156 } MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
157     Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
158 
159 typedef struct _MPI2_IEEE_SGE_SIMPLE64
160 {
161 	U64	Address;
162 	U32	Length;
163 	U16	Reserved1;
164 	U8	Reserved2;
165 	U8	Flags;
166 } MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
167     Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
168 
169 typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
170 {
171 	MPI2_IEEE_SGE_SIMPLE32	Simple32;
172 	MPI2_IEEE_SGE_SIMPLE64	Simple64;
173 } MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
174     Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
175 
176 typedef	MPI2_IEEE_SGE_SIMPLE32	MPI2_IEEE_SGE_CHAIN32;
177 typedef	MPI2_IEEE_SGE_SIMPLE64	MPI2_IEEE_SGE_CHAIN64;
178 
179 typedef union _MPI2_IEEE_SGE_CHAIN_UNION
180 {
181 	MPI2_IEEE_SGE_CHAIN32	Chain32;
182 	MPI2_IEEE_SGE_CHAIN64	Chain64;
183 } MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
184     Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
185 
186 typedef union _MPI2_SGE_IO_UNION
187 {
188 	MPI2_SGE_SIMPLE_UNION		MpiSimple;
189 	MPI2_SGE_CHAIN_UNION		MpiChain;
190 	MPI2_IEEE_SGE_SIMPLE_UNION	IeeeSimple;
191 	MPI2_IEEE_SGE_CHAIN_UNION	IeeeChain;
192 } MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
193     Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
194 
195 typedef union
196 {
197 	U8				CDB32[32];
198 	MPI2_SCSI_IO_CDB_EEDP32		EEDP32;
199 	MPI2_SGE_SIMPLE_UNION		SGE;
200 } MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
201     Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
202 
203 /* Default Request Descriptor */
204 typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
205 {
206 	U8		RequestFlags;			/* 0x00 */
207 	U8		MSIxIndex;			/* 0x01 */
208 	U16		SMID;				/* 0x02 */
209 	U16		LMID;				/* 0x04 */
210 	U16		DescriptorTypeDependent;	/* 0x06 */
211 } MPI2_DEFAULT_REQUEST_DESCRIPTOR,
212     MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
213     Mpi2DefaultRequestDescriptor_t,
214     MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
215 
216 /* High Priority Request Descriptor */
217 typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
218 {
219 	U8		RequestFlags;			/* 0x00 */
220 	U8		MSIxIndex;			/* 0x01 */
221 	U16		SMID;				/* 0x02 */
222 	U16		LMID;				/* 0x04 */
223 	U16		Reserved1;			/* 0x06 */
224 } MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
225     MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
226     Mpi2HighPriorityRequestDescriptor_t,
227     MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
228 
229 /* SCSI IO Request Descriptor */
230 typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
231 {
232 	U8		RequestFlags;			/* 0x00 */
233 	U8		MSIxIndex;			/* 0x01 */
234 	U16		SMID;				/* 0x02 */
235 	U16		LMID;				/* 0x04 */
236 	U16		DevHandle;			/* 0x06 */
237 } MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
238     MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
239     Mpi2SCSIIORequestDescriptor_t,
240     MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
241 
242 /* SCSI Target Request Descriptor */
243 typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
244 {
245 	U8		RequestFlags;			/* 0x00 */
246 	U8		MSIxIndex;			/* 0x01 */
247 	U16		SMID;				/* 0x02 */
248 	U16		LMID;				/* 0x04 */
249 	U16		IoIndex;			/* 0x06 */
250 } MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
251     MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
252     Mpi2SCSITargetRequestDescriptor_t,
253     MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
254 
255 /* RAID Accelerator Request Descriptor */
256 typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR
257 {
258 	U8		RequestFlags;			/* 0x00 */
259 	U8		MSIxIndex;			/* 0x01 */
260 	U16		SMID;				/* 0x02 */
261 	U16		LMID;				/* 0x04 */
262 	U16		Reserved;			/* 0x06 */
263 } MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
264     MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
265     Mpi2RAIDAcceleratorRequestDescriptor_t,
266     MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
267 
268 /* Default Reply Descriptor */
269 typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
270 {
271 	U8		ReplyFlags;			/* 0x00 */
272 	U8		MSIxIndex;			/* 0x01 */
273 	U16		DescriptorTypeDependent1;	/* 0x02 */
274 	U32		DescriptorTypeDependent2;	/* 0x04 */
275 } MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
276     Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
277 
278 /* Address Reply Descriptor */
279 typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
280 {
281 	U8		ReplyFlags;			/* 0x00 */
282 	U8		MSIxIndex;			/* 0x01 */
283 	U16		SMID;				/* 0x02 */
284 	U32		ReplyFrameAddress;		/* 0x04 */
285 } MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
286     Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
287 
288 /* SCSI IO Success Reply Descriptor */
289 typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
290 {
291 	U8		ReplyFlags;			/* 0x00 */
292 	U8		MSIxIndex;			/* 0x01 */
293 	U16		SMID;				/* 0x02 */
294 	U16		TaskTag;			/* 0x04 */
295 	U16		Reserved1;			/* 0x06 */
296 } MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
297     MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
298     Mpi2SCSIIOSuccessReplyDescriptor_t,
299     MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
300 
301 /* TargetAssist Success Reply Descriptor */
302 typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
303 {
304 	U8		ReplyFlags;			/* 0x00 */
305 	U8		MSIxIndex;			/* 0x01 */
306 	U16		SMID;				/* 0x02 */
307 	U8		SequenceNumber;			/* 0x04 */
308 	U8		Reserved1;			/* 0x05 */
309 	U16		IoIndex;			/* 0x06 */
310 } MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
311     MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
312     Mpi2TargetAssistSuccessReplyDescriptor_t,
313     MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
314 
315 /* Target Command Buffer Reply Descriptor */
316 typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
317 {
318 	U8		ReplyFlags;			/* 0x00 */
319 	U8		MSIxIndex;			/* 0x01 */
320 	U8		VP_ID;				/* 0x02 */
321 	U8		Flags;				/* 0x03 */
322 	U16		InitiatorDevHandle;		/* 0x04 */
323 	U16		IoIndex;			/* 0x06 */
324 } MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
325     MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
326     Mpi2TargetCommandBufferReplyDescriptor_t,
327     MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
328 
329 /* RAID Accelerator Success Reply Descriptor */
330 typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
331 {
332 	U8		ReplyFlags;			/* 0x00 */
333 	U8		MSIxIndex;			/* 0x01 */
334 	U16		SMID;				/* 0x02 */
335 	U32		Reserved;			/* 0x04 */
336 } MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
337     MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
338     Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
339     MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
340 
341 /* union of Reply Descriptors */
342 typedef union _MPI2_REPLY_DESCRIPTORS_UNION
343 {
344 	MPI2_DEFAULT_REPLY_DESCRIPTOR			Default;
345 	MPI2_ADDRESS_REPLY_DESCRIPTOR			AddressReply;
346 	MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR		SCSIIOSuccess;
347 	MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR	TargetAssistSuccess;
348 	MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR	TargetCommandBuffer;
349 	MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR	RAIDAcceleratorSuccess;
350 	U64						Words;
351 } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
352     Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
353 
354 /* IOCInit Request message */
355 typedef struct _MPI2_IOC_INIT_REQUEST
356 {
357 	U8		WhoInit;				/* 0x00 */
358 	U8		Reserved1;				/* 0x01 */
359 	U8		ChainOffset;				/* 0x02 */
360 	U8		Function;				/* 0x03 */
361 	U16		Reserved2;				/* 0x04 */
362 	U8		Reserved3;				/* 0x06 */
363 	U8		MsgFlags;				/* 0x07 */
364 	U8		VP_ID;					/* 0x08 */
365 	U8		VF_ID;					/* 0x09 */
366 	U16		Reserved4;				/* 0x0A */
367 	U16		MsgVersion;				/* 0x0C */
368 	U16		HeaderVersion;				/* 0x0E */
369 	U32		Reserved5;				/* 0x10 */
370 	U16		Reserved6;				/* 0x14 */
371 	U8		Reserved7;				/* 0x16 */
372 	U8		HostMSIxVectors;			/* 0x17 */
373 	U16		Reserved8;				/* 0x18 */
374 	U16		SystemRequestFrameSize;			/* 0x1A */
375 	U16		ReplyDescriptorPostQueueDepth;		/* 0x1C */
376 	U16		ReplyFreeQueueDepth;			/* 0x1E */
377 	U32		SenseBufferAddressHigh;			/* 0x20 */
378 	U32		SystemReplyAddressHigh;			/* 0x24 */
379 	U64		SystemRequestFrameBaseAddress;		/* 0x28 */
380 	U64		ReplyDescriptorPostQueueAddress;	/* 0x30 */
381 	U64		ReplyFreeQueueAddress;			/* 0x38 */
382 	U64		TimeStamp;				/* 0x40 */
383 } MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST,
384     Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t;
385 
386 
387 typedef struct _MR_DEV_HANDLE_INFO {
388 
389 	/* Send bitmap of LDs that are idle with respect to FP */
390 	U16		curDevHdl;
391 
392 	/* bitmap of valid device handles. */
393 	U8		validHandles;
394 	U8		reserved;
395 	/* 0x04 dev handles for all the paths. */
396 	U16		devHandle[2];
397 } MR_DEV_HANDLE_INFO;				/* 0x08, Total Size */
398 
399 typedef struct _MR_ARRAY_INFO {
400 	U16	pd[MAX_RAIDMAP_ROW_SIZE];
401 } MR_ARRAY_INFO;			/* 0x40, Total Size */
402 
403 typedef struct _MR_QUAD_ELEMENT {
404 	U64		logStart;			/* 0x00 */
405 	U64		logEnd;				/* 0x08 */
406 	U64		offsetInSpan;			/* 0x10 */
407 	U32		diff;				/* 0x18 */
408 	U32		reserved1;			/* 0x1C */
409 } MR_QUAD_ELEMENT;					/* 0x20, Total size */
410 
411 typedef struct _MR_SPAN_INFO {
412 	U32		noElements;			/* 0x00 */
413 	U32		reserved1;			/* 0x04 */
414 	MR_QUAD_ELEMENT	quads[MAX_RAIDMAP_SPAN_DEPTH];	/* 0x08 */
415 } MR_SPAN_INFO;						/* 0x108, Total size */
416 
417 typedef struct _MR_LD_SPAN_ {				/* SPAN structure */
418 	/* 0x00, starting block number in array */
419 	U64		startBlk;
420 
421 	/* 0x08, number of blocks */
422 	U64		numBlks;
423 
424 	/* 0x10, array reference */
425 	U16		arrayRef;
426 
427 	U8		reserved[6];	/* 0x12 */
428 } MR_LD_SPAN;				/* 0x18, Total Size */
429 
430 typedef struct _MR_SPAN_BLOCK_INFO {
431 	/* number of rows/span */
432 	U64		num_rows;
433 
434 	MR_LD_SPAN	span;				/* 0x08 */
435 	MR_SPAN_INFO	block_span_info;		/* 0x20 */
436 } MR_SPAN_BLOCK_INFO;					/* 0x128, Total Size */
437 
438 typedef struct _MR_LD_RAID {
439 	struct {
440 		U32	fpCapable	:1;
441 		U32	reserved5	:3;
442 		U32	ldPiMode	:4;
443 		U32	pdPiMode	:4;
444 
445 		/* FDE or controller encryption (MR_LD_ENCRYPTION_TYPE) */
446 		U32	encryptionType	:8;
447 
448 		U32	fpWriteCapable	:1;
449 		U32	fpReadCapable	:1;
450 		U32	fpWriteAcrossStripe:1;
451 		U32	fpReadAcrossStripe:1;
452 		U32	reserved4	:8;
453 	} capability;			/* 0x00 */
454 	U32	reserved6;
455 	U64	size;			/* 0x08, LD size in blocks */
456 	U8	spanDepth;		/* 0x10, Total Number of Spans */
457 	U8	level;			/* 0x11, RAID level */
458 	/* 0x12, shift-count to get stripe size (0=512, 1=1K, 7=64K, etc.) */
459 	U8	stripeShift;
460 	U8	rowSize;		/* 0x13, number of disks in a row */
461 	/* 0x14, number of data disks in a row */
462 	U8	rowDataSize;
463 	U8	writeMode;		/* 0x15, WRITE_THROUGH or WRITE_BACK */
464 
465 	/* 0x16, To differentiate between RAID1 and RAID1E */
466 	U8	PRL;
467 
468 	U8	SRL;			/* 0x17 */
469 	U16	targetId;		/* 0x18, ld Target Id. */
470 
471 	/* 0x1a, state of ld, state corresponds to MR_LD_STATE */
472 	U8	ldState;
473 
474 	/* 0x1b, Pre calculate region type requests based on MFC etc.. */
475 	U8	regTypeReqOnWrite;
476 
477 	U8	modFactor;		/* 0x1c, same as rowSize */
478 	/*
479 	 * 0x1d, region lock type used for read, valid only if
480 	 * regTypeOnReadIsValid=1
481 	 */
482 	U8	regTypeReqOnRead;
483 	U16	seqNum;			/* 0x1e, LD sequence number */
484 
485 	struct {
486 		/* This LD requires sync command before completing */
487 		U32	ldSyncRequired:1;
488 		U32	reserved:31;
489 	} flags;			/* 0x20 */
490 
491 	U8	reserved3[0x5C];	/* 0x24 */
492 } MR_LD_RAID;				/* 0x80, Total Size */
493 
494 typedef struct _MR_LD_SPAN_MAP {
495 	MR_LD_RAID		ldRaid;	/* 0x00 */
496 
497 	/* 0x80, needed for GET_ARM() - R0/1/5 only. */
498 	U8			dataArmMap[MAX_RAIDMAP_ROW_SIZE];
499 
500 	MR_SPAN_BLOCK_INFO	spanBlock[MAX_RAIDMAP_SPAN_DEPTH]; /* 0xA0 */
501 } MR_LD_SPAN_MAP;	/* 0x9E0 */
502 
503 typedef struct _MR_FW_RAID_MAP {
504 	/* total size of this structure, including this field */
505 	U32			totalSize;
506 	union {
507 		/* Simple method of version checking variables */
508 		struct {
509 			U32	maxLd;
510 			U32	maxSpanDepth;
511 			U32	maxRowSize;
512 			U32	maxPdCount;
513 			U32	maxArrays;
514 		} validationInfo;
515 		U32	version[5];
516 		U32	reserved1[5];
517 	} u1;
518 
519 	U32			ldCount;		/* count of lds */
520 	U32			Reserved1;
521 
522 	/*
523 	 * 0x20 This doesn't correspond to
524 	 * FW Ld Tgt Id to LD, but will purge. For example: if tgt Id is 4
525 	 * and FW LD is 2, and there is only one LD, FW will populate the
526 	 * array like this. [0xFF, 0xFF, 0xFF, 0xFF, 0x0.....]. This is to
527 	 * help reduce the entire structure size if there are few LDs or
528 	 * driver is looking info for 1 LD only.
529 	 */
530 	U8			ldTgtIdToLd[MAX_RAIDMAP_LOGICAL_DRIVES+ \
531 				MAX_RAIDMAP_VIEWS]; /* 0x20 */
532 	/* timeout value used by driver in FP IOs */
533 	U8			fpPdIoTimeoutSec;
534 	U8			reserved2[7];
535 	MR_ARRAY_INFO		arMapInfo[MAX_RAIDMAP_ARRAYS];	/* 0x00a8 */
536 	MR_DEV_HANDLE_INFO	devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
537 
538 	/* 0x28a8-[0 -MAX_RAIDMAP_LOGICAL_DRIVES+MAX_RAIDMAP_VIEWS+1]; */
539 	MR_LD_SPAN_MAP		ldSpanMap[1];
540 }MR_FW_RAID_MAP;					/* 0x3288, Total Size */
541 
542 typedef struct _LD_TARGET_SYNC {
543 	U8	ldTargetId;
544 	U8	reserved;
545 	U16	seqNum;
546 } LD_TARGET_SYNC;
547 
548 #pragma pack()
549 
550 struct IO_REQUEST_INFO {
551 	U64	ldStartBlock;
552 	U32	numBlocks;
553 	U16	ldTgtId;
554 	U8	isRead;
555 	U16	devHandle;
556 	U64	pdBlock;
557 	U8	fpOkForIo;
558 	U8	ldPI;
559 };
560 
561 #endif /* _FUSION_H_ */
562