xref: /freebsd/crypto/openssl/test/ssl-tests/protocol_version.pm (revision e0c4386e7e71d93b0edc0c8fa156263fc4a8b0b6)
1# -*- mode: perl; -*-
2# Copyright 2016-2021 The OpenSSL Project Authors. All Rights Reserved.
3#
4# Licensed under the Apache License 2.0 (the "License").  You may not use
5# this file except in compliance with the License.  You can obtain a copy
6# in the file LICENSE in the source distribution or at
7# https://www.openssl.org/source/license.html
8
9
10## Test version negotiation
11
12package ssltests;
13
14use strict;
15use warnings;
16
17use List::Util qw/max min/;
18
19use OpenSSL::Test;
20use OpenSSL::Test::Utils qw/anydisabled alldisabled disabled/;
21setup("no_test_here");
22
23my @tls_protocols = ("SSLv3", "TLSv1", "TLSv1.1", "TLSv1.2", "TLSv1.3");
24my @tls_protocols_fips = ("TLSv1.2", "TLSv1.3");
25# undef stands for "no limit".
26my @min_tls_protocols = (undef, "SSLv3", "TLSv1", "TLSv1.1", "TLSv1.2", "TLSv1.3");
27my @min_tls_protocols_fips = (undef, "TLSv1.2", "TLSv1.3");
28my @max_tls_protocols = ("SSLv3", "TLSv1", "TLSv1.1", "TLSv1.2", "TLSv1.3", undef);
29my @max_tls_protocols_fips = ("TLSv1.2", "TLSv1.3", undef);
30
31my @is_tls_disabled = anydisabled("ssl3", "tls1", "tls1_1", "tls1_2", "tls1_3");
32my @is_tls_disabled_fips = anydisabled("tls1_2", "tls1_3");
33
34my $min_tls_enabled; my $max_tls_enabled;
35my $min_tls_enabled_fips; my $max_tls_enabled_fips;
36
37# Protocol configuration works in cascades, i.e.,
38# $no_tls1_1 disables TLSv1.1 and below.
39#
40# $min_enabled and $max_enabled will be correct if there is at least one
41# protocol enabled.
42
43sub min_prot_enabled {
44    my $protref = shift;
45    my $disabledref = shift;
46    my @protocols = @{$protref};
47    my @is_disabled = @{$disabledref};
48    my $min_enabled;
49
50    foreach my $i (0..$#protocols) {
51        if (!$is_disabled[$i]) {
52            $min_enabled = $i;
53            last;
54        }
55    }
56    return $min_enabled;
57}
58
59sub max_prot_enabled {
60    my $protref = shift;
61    my $disabledref = shift;
62    my @protocols = @{$protref};
63    my @is_disabled = @{$disabledref};
64    my $max_enabled;
65
66    foreach my $i (0..$#protocols) {
67        if (!$is_disabled[$i]
68                && ($protocols[$i] ne "TLSv1.3"
69                    || !disabled("ec")
70                    || !disabled("dh"))) {
71            $max_enabled = $i;
72        }
73    }
74    return $max_enabled;
75}
76
77$min_tls_enabled = min_prot_enabled(\@tls_protocols, \@is_tls_disabled);
78$max_tls_enabled = max_prot_enabled(\@tls_protocols, \@is_tls_disabled);
79$min_tls_enabled_fips = min_prot_enabled(\@tls_protocols_fips, \@is_tls_disabled_fips);
80$max_tls_enabled_fips = max_prot_enabled(\@tls_protocols_fips, \@is_tls_disabled_fips);
81
82
83my @dtls_protocols = ("DTLSv1", "DTLSv1.2");
84my @dtls_protocols_fips = ("DTLSv1.2");
85# undef stands for "no limit".
86my @min_dtls_protocols = (undef, "DTLSv1", "DTLSv1.2");
87my @min_dtls_protocols_fips = (undef, "DTLSv1.2");
88my @max_dtls_protocols = ("DTLSv1", "DTLSv1.2", undef);
89my @max_dtls_protocols_fips = ("DTLSv1.2", undef);
90
91my @is_dtls_disabled = anydisabled("dtls1", "dtls1_2");
92my @is_dtls_disabled_fips = anydisabled("dtls1_2");
93
94my $min_dtls_enabled; my $max_dtls_enabled;
95my $min_dtls_enabled_fips; my $max_dtls_enabled_fips;
96
97# $min_enabled and $max_enabled will be correct if there is at least one
98# protocol enabled.
99$min_dtls_enabled = min_prot_enabled(\@dtls_protocols, \@is_dtls_disabled);
100$max_dtls_enabled = max_prot_enabled(\@dtls_protocols, \@is_dtls_disabled);
101$min_dtls_enabled_fips = min_prot_enabled(\@dtls_protocols_fips, \@is_dtls_disabled_fips);
102$max_dtls_enabled_fips = max_prot_enabled(\@dtls_protocols_fips, \@is_dtls_disabled_fips);
103
104sub no_tests {
105    my ($dtls, $fips) = @_;
106    if ($dtls && $fips) {
107        return disabled("dtls1_2");
108    }
109    return $dtls ? alldisabled("dtls1", "dtls1_2") :
110      alldisabled("ssl3", "tls1", "tls1_1", "tls1_2", "tls1_3");
111}
112
113sub generate_version_tests {
114    my $method = shift;
115    my $fips = shift;
116
117    my $dtls = $method eq "DTLS";
118    # Don't write the redundant "Method = TLS" into the configuration.
119    undef $method if !$dtls;
120
121    my @protocols;
122    my @min_protocols;
123    my @max_protocols;
124    my $min_enabled;
125    my $max_enabled;
126    if ($fips) {
127        @protocols = $dtls ? @dtls_protocols_fips : @tls_protocols_fips;
128        @min_protocols = $dtls ? @min_dtls_protocols_fips : @min_tls_protocols_fips;
129        @max_protocols = $dtls ? @max_dtls_protocols_fips : @max_tls_protocols_fips;
130        $min_enabled  = $dtls ? $min_dtls_enabled_fips : $min_tls_enabled_fips;
131        $max_enabled  = $dtls ? $max_dtls_enabled_fips : $max_tls_enabled_fips;
132    } else {
133        @protocols = $dtls ? @dtls_protocols : @tls_protocols;
134        @min_protocols = $dtls ? @min_dtls_protocols : @min_tls_protocols;
135        @max_protocols = $dtls ? @max_dtls_protocols : @max_tls_protocols;
136        $min_enabled  = $dtls ? $min_dtls_enabled : $min_tls_enabled;
137        $max_enabled  = $dtls ? $max_dtls_enabled : $max_tls_enabled;
138    }
139
140    if (no_tests($dtls, $fips)) {
141        return;
142    }
143
144    my @tests = ();
145
146    for (my $sctp = 0; $sctp < ($dtls && !disabled("sctp") ? 2 : 1); $sctp++) {
147        foreach my $c_min (0..$#min_protocols) {
148            my $c_max_min = $c_min == 0 ? 0 : $c_min - 1;
149            foreach my $c_max ($c_max_min..$#max_protocols) {
150                foreach my $s_min (0..$#min_protocols) {
151                    my $s_max_min = $s_min == 0 ? 0 : $s_min - 1;
152                    foreach my $s_max ($s_max_min..$#max_protocols) {
153                        my ($result, $protocol) =
154                            expected_result($c_min, $c_max, $s_min, $s_max,
155                                            $min_enabled, $max_enabled,
156                                            \@protocols);
157                        push @tests, {
158                            "name" => "version-negotiation",
159                            "client" => {
160                                "CipherString" => "DEFAULT:\@SECLEVEL=0",
161                                "MinProtocol" => $min_protocols[$c_min],
162                                "MaxProtocol" => $max_protocols[$c_max],
163                            },
164                            "server" => {
165                                "CipherString" => "DEFAULT:\@SECLEVEL=0",
166                                "MinProtocol" => $min_protocols[$s_min],
167                                "MaxProtocol" => $max_protocols[$s_max],
168                            },
169                            "test" => {
170                                "ExpectedResult" => $result,
171                                "ExpectedProtocol" => $protocol,
172                                "Method" => $method,
173                            }
174                        };
175                        $tests[-1]{"test"}{"UseSCTP"} = "Yes" if $sctp;
176                    }
177                }
178            }
179        }
180    }
181    return @tests
182        if disabled("tls1_3")
183           || disabled("tls1_2")
184           || (disabled("ec") && disabled("dh"))
185           || $dtls;
186
187    #Add some version/ciphersuite sanity check tests
188    push @tests, {
189        "name" => "ciphersuite-sanity-check-client",
190        "client" => {
191            #Offering only <=TLSv1.2 ciphersuites with TLSv1.3 should fail
192            "CipherString" => "AES128-SHA",
193            "Ciphersuites" => "",
194        },
195        "server" => {
196            "MaxProtocol" => "TLSv1.2"
197        },
198        "test" => {
199            "ExpectedResult" => "ClientFail",
200        }
201    };
202    push @tests, {
203        "name" => "ciphersuite-sanity-check-server",
204        "client" => {
205            "CipherString" => "AES128-SHA",
206            "MaxProtocol" => "TLSv1.2"
207        },
208        "server" => {
209            #Allowing only <=TLSv1.2 ciphersuites with TLSv1.3 should fail
210            "CipherString" => "AES128-SHA",
211            "Ciphersuites" => "",
212        },
213        "test" => {
214            "ExpectedResult" => "ServerFail",
215        }
216    };
217
218    return @tests;
219}
220
221sub generate_resumption_tests {
222    my $method = shift;
223    my $fips = shift;
224
225    my $dtls = $method eq "DTLS";
226    # Don't write the redundant "Method = TLS" into the configuration.
227    undef $method if !$dtls;
228
229    my @protocols;
230    my $min_enabled;
231    my $max_enabled;
232
233    if ($fips) {
234        @protocols = $dtls ? @dtls_protocols_fips : @tls_protocols_fips;
235        $min_enabled  = $dtls ? $min_dtls_enabled_fips : $min_tls_enabled_fips;
236        $max_enabled = $dtls ? $max_dtls_enabled_fips : $max_tls_enabled_fips;
237    } else {
238        @protocols = $dtls ? @dtls_protocols : @tls_protocols;
239        $min_enabled  = $dtls ? $min_dtls_enabled : $min_tls_enabled;
240        $max_enabled = $dtls ? $max_dtls_enabled : $max_tls_enabled;
241    }
242
243    if (no_tests($dtls)) {
244        return;
245    }
246
247    my @server_tests = ();
248    my @client_tests = ();
249
250    # Obtain the first session against a fixed-version server/client.
251    foreach my $original_protocol($min_enabled..$max_enabled) {
252        # Upgrade or downgrade the server/client max version support and test
253        # that it upgrades, downgrades or resumes the session as well.
254        foreach my $resume_protocol($min_enabled..$max_enabled) {
255            my $resumption_expected;
256            # We should only resume on exact version match.
257            if ($original_protocol eq $resume_protocol) {
258                $resumption_expected = "Yes";
259            } else {
260                $resumption_expected = "No";
261            }
262
263            for (my $sctp = 0; $sctp < ($dtls && !disabled("sctp") ? 2 : 1);
264                 $sctp++) {
265                foreach my $ticket ("SessionTicket", "-SessionTicket") {
266                    # Client is flexible, server upgrades/downgrades.
267                    push @server_tests, {
268                        "name" => "resumption",
269                        "client" => {
270                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
271                        },
272                        "server" => {
273                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
274                            "MinProtocol" => $protocols[$original_protocol],
275                            "MaxProtocol" => $protocols[$original_protocol],
276                            "Options" => $ticket,
277                        },
278                        "resume_server" => {
279                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
280                            "MaxProtocol" => $protocols[$resume_protocol],
281                            "Options" => $ticket,
282                        },
283                        "test" => {
284                            "ExpectedProtocol" => $protocols[$resume_protocol],
285                            "Method" => $method,
286                            "HandshakeMode" => "Resume",
287                            "ResumptionExpected" => $resumption_expected,
288                        }
289                    };
290                    $server_tests[-1]{"test"}{"UseSCTP"} = "Yes" if $sctp;
291                    # Server is flexible, client upgrades/downgrades.
292                    push @client_tests, {
293                        "name" => "resumption",
294                        "client" => {
295                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
296                            "MinProtocol" => $protocols[$original_protocol],
297                            "MaxProtocol" => $protocols[$original_protocol],
298                        },
299                        "server" => {
300                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
301                            "Options" => $ticket,
302                        },
303                        "resume_client" => {
304                            "CipherString" => "DEFAULT:\@SECLEVEL=0",
305                            "MaxProtocol" => $protocols[$resume_protocol],
306                        },
307                        "test" => {
308                            "ExpectedProtocol" => $protocols[$resume_protocol],
309                            "Method" => $method,
310                            "HandshakeMode" => "Resume",
311                            "ResumptionExpected" => $resumption_expected,
312                        }
313                    };
314                    $client_tests[-1]{"test"}{"UseSCTP"} = "Yes" if $sctp;
315                }
316            }
317        }
318    }
319
320    if (!disabled("tls1_3") && (!disabled("ec") || !disabled("dh")) && !$dtls) {
321        push @client_tests, {
322            "name" => "resumption-with-hrr",
323            "client" => {
324            },
325            "server" => {
326                "Curves" => disabled("ec") ? "ffdhe3072" : "P-256"
327            },
328            "resume_client" => {
329            },
330            "test" => {
331                "ExpectedProtocol" => "TLSv1.3",
332                "Method" => "TLS",
333                "HandshakeMode" => "Resume",
334                "ResumptionExpected" => "Yes",
335            }
336        };
337    }
338
339    return (@server_tests, @client_tests);
340}
341
342sub expected_result {
343    my ($c_min, $c_max, $s_min, $s_max, $min_enabled, $max_enabled,
344        $protocols) = @_;
345    my @prots = @$protocols;
346
347    my $orig_c_max = $c_max;
348    # Adjust for "undef" (no limit).
349    $c_min = $c_min == 0 ? 0 : $c_min - 1;
350    $c_max = $c_max == scalar @$protocols ? $c_max - 1 : $c_max;
351    $s_min = $s_min == 0 ? 0 : $s_min - 1;
352    $s_max = $s_max == scalar @$protocols ? $s_max - 1 : $s_max;
353
354    # We now have at least one protocol enabled, so $min_enabled and
355    # $max_enabled are well-defined.
356    $c_min = max $c_min, $min_enabled;
357    $s_min = max $s_min, $min_enabled;
358    $c_max = min $c_max, $max_enabled;
359    $s_max = min $s_max, $max_enabled;
360
361    if ($c_min > $c_max
362            || ($orig_c_max != scalar @$protocols
363                && $prots[$orig_c_max] eq "TLSv1.3"
364                && $c_max != $orig_c_max
365                && !disabled("tls1_3"))) {
366        # Client should fail to even send a hello.
367        return ("ClientFail", undef);
368    } elsif ($s_min > $s_max) {
369        # Server has no protocols, should always fail.
370        return ("ServerFail", undef);
371    } elsif ($s_min > $c_max) {
372        # Server doesn't support the client range.
373        return ("ServerFail", undef);
374    } elsif ($c_min > $s_max) {
375        if ($prots[$c_max] eq "TLSv1.3") {
376            # Client will have sent supported_versions, so server will know
377            # that there are no overlapping versions.
378            return ("ServerFail", undef);
379        } else {
380            # Server will try with a version that is lower than the lowest
381            # supported client version.
382            return ("ClientFail", undef);
383        }
384    } else {
385        # Server and client ranges overlap.
386        my $max_common = $s_max < $c_max ? $s_max : $c_max;
387        return ("Success", $protocols->[$max_common]);
388    }
389}
390
3911;
392