xref: /linux/include/drm/drm_mipi_dsi.h (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * MIPI DSI Bus
4  *
5  * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
6  * Andrzej Hajda <a.hajda@samsung.com>
7  */
8 
9 #ifndef __DRM_MIPI_DSI_H__
10 #define __DRM_MIPI_DSI_H__
11 
12 #include <linux/device.h>
13 #include <linux/delay.h>
14 
15 struct mipi_dsi_host;
16 struct mipi_dsi_device;
17 struct drm_dsc_picture_parameter_set;
18 
19 /* request ACK from peripheral */
20 #define MIPI_DSI_MSG_REQ_ACK	BIT(0)
21 /* use Low Power Mode to transmit message */
22 #define MIPI_DSI_MSG_USE_LPM	BIT(1)
23 
24 /**
25  * struct mipi_dsi_msg - read/write DSI buffer
26  * @channel: virtual channel id
27  * @type: payload data type
28  * @flags: flags controlling this message transmission
29  * @tx_len: length of @tx_buf
30  * @tx_buf: data to be written
31  * @rx_len: length of @rx_buf
32  * @rx_buf: data to be read, or NULL
33  */
34 struct mipi_dsi_msg {
35 	u8 channel;
36 	u8 type;
37 	u16 flags;
38 
39 	size_t tx_len;
40 	const void *tx_buf;
41 
42 	size_t rx_len;
43 	void *rx_buf;
44 };
45 
46 bool mipi_dsi_packet_format_is_short(u8 type);
47 bool mipi_dsi_packet_format_is_long(u8 type);
48 
49 /**
50  * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
51  * @size: size (in bytes) of the packet
52  * @header: the four bytes that make up the header (Data ID, Word Count or
53  *     Packet Data, and ECC)
54  * @payload_length: number of bytes in the payload
55  * @payload: a pointer to a buffer containing the payload, if any
56  */
57 struct mipi_dsi_packet {
58 	size_t size;
59 	u8 header[4];
60 	size_t payload_length;
61 	const u8 *payload;
62 };
63 
64 int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
65 			   const struct mipi_dsi_msg *msg);
66 
67 /**
68  * struct mipi_dsi_host_ops - DSI bus operations
69  * @attach: attach DSI device to DSI host
70  * @detach: detach DSI device from DSI host
71  * @transfer: transmit a DSI packet
72  *
73  * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
74  * structures. This structure contains information about the type of packet
75  * being transmitted as well as the transmit and receive buffers. When an
76  * error is encountered during transmission, this function will return a
77  * negative error code. On success it shall return the number of bytes
78  * transmitted for write packets or the number of bytes received for read
79  * packets.
80  *
81  * Note that typically DSI packet transmission is atomic, so the .transfer()
82  * function will seldomly return anything other than the number of bytes
83  * contained in the transmit buffer on success.
84  *
85  * Also note that those callbacks can be called no matter the state the
86  * host is in. Drivers that need the underlying device to be powered to
87  * perform these operations will first need to make sure it's been
88  * properly enabled.
89  */
90 struct mipi_dsi_host_ops {
91 	int (*attach)(struct mipi_dsi_host *host,
92 		      struct mipi_dsi_device *dsi);
93 	int (*detach)(struct mipi_dsi_host *host,
94 		      struct mipi_dsi_device *dsi);
95 	ssize_t (*transfer)(struct mipi_dsi_host *host,
96 			    const struct mipi_dsi_msg *msg);
97 };
98 
99 /**
100  * struct mipi_dsi_host - DSI host device
101  * @dev: driver model device node for this DSI host
102  * @ops: DSI host operations
103  * @list: list management
104  */
105 struct mipi_dsi_host {
106 	struct device *dev;
107 	const struct mipi_dsi_host_ops *ops;
108 	struct list_head list;
109 };
110 
111 int mipi_dsi_host_register(struct mipi_dsi_host *host);
112 void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
113 struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
114 
115 /* DSI mode flags */
116 
117 /* video mode */
118 #define MIPI_DSI_MODE_VIDEO		BIT(0)
119 /* video burst mode */
120 #define MIPI_DSI_MODE_VIDEO_BURST	BIT(1)
121 /* video pulse mode */
122 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE	BIT(2)
123 /* enable auto vertical count mode */
124 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT	BIT(3)
125 /* enable hsync-end packets in vsync-pulse and v-porch area */
126 #define MIPI_DSI_MODE_VIDEO_HSE		BIT(4)
127 /* disable hfront-porch area */
128 #define MIPI_DSI_MODE_VIDEO_NO_HFP	BIT(5)
129 /* disable hback-porch area */
130 #define MIPI_DSI_MODE_VIDEO_NO_HBP	BIT(6)
131 /* disable hsync-active area */
132 #define MIPI_DSI_MODE_VIDEO_NO_HSA	BIT(7)
133 /* flush display FIFO on vsync pulse */
134 #define MIPI_DSI_MODE_VSYNC_FLUSH	BIT(8)
135 /* disable EoT packets in HS mode */
136 #define MIPI_DSI_MODE_NO_EOT_PACKET	BIT(9)
137 /* device supports non-continuous clock behavior (DSI spec 5.6.1) */
138 #define MIPI_DSI_CLOCK_NON_CONTINUOUS	BIT(10)
139 /* transmit data in low power */
140 #define MIPI_DSI_MODE_LPM		BIT(11)
141 /* transmit data ending at the same time for all lanes within one hsync */
142 #define MIPI_DSI_HS_PKT_END_ALIGNED	BIT(12)
143 
144 enum mipi_dsi_pixel_format {
145 	MIPI_DSI_FMT_RGB888,
146 	MIPI_DSI_FMT_RGB666,
147 	MIPI_DSI_FMT_RGB666_PACKED,
148 	MIPI_DSI_FMT_RGB565,
149 };
150 
151 #define DSI_DEV_NAME_SIZE		20
152 
153 /**
154  * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
155  * @type: DSI peripheral chip type
156  * @channel: DSI virtual channel assigned to peripheral
157  * @node: pointer to OF device node or NULL
158  *
159  * This is populated and passed to mipi_dsi_device_new to create a new
160  * DSI device
161  */
162 struct mipi_dsi_device_info {
163 	char type[DSI_DEV_NAME_SIZE];
164 	u32 channel;
165 	struct device_node *node;
166 };
167 
168 /**
169  * struct mipi_dsi_device - DSI peripheral device
170  * @host: DSI host for this peripheral
171  * @dev: driver model device node for this peripheral
172  * @attached: the DSI device has been successfully attached
173  * @name: DSI peripheral chip type
174  * @channel: virtual channel assigned to the peripheral
175  * @format: pixel format for video mode
176  * @lanes: number of active data lanes
177  * @mode_flags: DSI operation mode related flags
178  * @hs_rate: maximum lane frequency for high speed mode in hertz, this should
179  * be set to the real limits of the hardware, zero is only accepted for
180  * legacy drivers
181  * @lp_rate: maximum lane frequency for low power mode in hertz, this should
182  * be set to the real limits of the hardware, zero is only accepted for
183  * legacy drivers
184  * @dsc: panel/bridge DSC pps payload to be sent
185  */
186 struct mipi_dsi_device {
187 	struct mipi_dsi_host *host;
188 	struct device dev;
189 	bool attached;
190 
191 	char name[DSI_DEV_NAME_SIZE];
192 	unsigned int channel;
193 	unsigned int lanes;
194 	enum mipi_dsi_pixel_format format;
195 	unsigned long mode_flags;
196 	unsigned long hs_rate;
197 	unsigned long lp_rate;
198 	struct drm_dsc_config *dsc;
199 };
200 
201 /**
202  * struct mipi_dsi_multi_context - Context to call multiple MIPI DSI funcs in a row
203  */
204 struct mipi_dsi_multi_context {
205 	/**
206 	 * @dsi: Pointer to the MIPI DSI device
207 	 */
208 	struct mipi_dsi_device *dsi;
209 
210 	/**
211 	 * @accum_err: Storage for the accumulated error over the multiple calls
212 	 *
213 	 * Init to 0. If a function encounters an error then the error code
214 	 * will be stored here. If you call a function and this points to a
215 	 * non-zero value then the function will be a noop. This allows calling
216 	 * a function many times in a row and just checking the error at the
217 	 * end to see if any of them failed.
218 	 */
219 	int accum_err;
220 };
221 
222 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
223 
224 #define to_mipi_dsi_device(__dev)	container_of_const(__dev, struct mipi_dsi_device, dev)
225 
226 /**
227  * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
228  *                                given pixel format defined by the MIPI DSI
229  *                                specification
230  * @fmt: MIPI DSI pixel format
231  *
232  * Returns: The number of bits per pixel of the given pixel format.
233  */
mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)234 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
235 {
236 	switch (fmt) {
237 	case MIPI_DSI_FMT_RGB888:
238 	case MIPI_DSI_FMT_RGB666:
239 		return 24;
240 
241 	case MIPI_DSI_FMT_RGB666_PACKED:
242 		return 18;
243 
244 	case MIPI_DSI_FMT_RGB565:
245 		return 16;
246 	}
247 
248 	return -EINVAL;
249 }
250 
251 enum mipi_dsi_compression_algo {
252 	MIPI_DSI_COMPRESSION_DSC = 0,
253 	MIPI_DSI_COMPRESSION_VENDOR = 3,
254 	/* other two values are reserved, DSI 1.3 */
255 };
256 
257 struct mipi_dsi_device *
258 mipi_dsi_device_register_full(struct mipi_dsi_host *host,
259 			      const struct mipi_dsi_device_info *info);
260 void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi);
261 struct mipi_dsi_device *
262 devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host,
263 				   const struct mipi_dsi_device_info *info);
264 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
265 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
266 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
267 int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi);
268 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
269 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
270 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
271 					    u16 value);
272 int mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
273 int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable,
274 				  enum mipi_dsi_compression_algo algo,
275 				  unsigned int pps_selector);
276 int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
277 				   const struct drm_dsc_picture_parameter_set *pps);
278 
279 void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx,
280 					 bool enable,
281 					 enum mipi_dsi_compression_algo algo,
282 					 unsigned int pps_selector);
283 void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx,
284 					  const struct drm_dsc_picture_parameter_set *pps);
285 
286 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
287 			       size_t size);
288 int mipi_dsi_generic_write_chatty(struct mipi_dsi_device *dsi,
289 				  const void *payload, size_t size);
290 void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx,
291 				  const void *payload, size_t size);
292 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
293 			      size_t num_params, void *data, size_t size);
294 
295 #define mipi_dsi_msleep(ctx, delay)	\
296 	do {				\
297 		if (!(ctx)->accum_err)	\
298 			msleep(delay);	\
299 	} while (0)
300 
301 #define mipi_dsi_usleep_range(ctx, min, max)	\
302 	do {					\
303 		if (!(ctx)->accum_err)		\
304 			usleep_range(min, max);	\
305 	} while (0)
306 
307 /**
308  * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
309  * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
310  *    information only
311  * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
312  *    V-Blanking and H-Blanking information
313  */
314 enum mipi_dsi_dcs_tear_mode {
315 	MIPI_DSI_DCS_TEAR_MODE_VBLANK,
316 	MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
317 };
318 
319 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
320 #define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
321 #define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
322 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
323 #define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
324 
325 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
326 				  const void *data, size_t len);
327 int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi,
328 				     const void *data, size_t len);
329 void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx,
330 				     const void *data, size_t len);
331 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
332 			   const void *data, size_t len);
333 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
334 			  size_t len);
335 int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
336 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
337 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
338 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
339 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
340 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
341 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
342 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
343 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
344 				    u16 end);
345 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
346 				  u16 end);
347 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
348 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
349 			     enum mipi_dsi_dcs_tear_mode mode);
350 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
351 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
352 int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
353 					u16 brightness);
354 int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
355 					u16 *brightness);
356 int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi,
357 					     u16 brightness);
358 int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi,
359 					     u16 *brightness);
360 
361 void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx);
362 void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx);
363 void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx);
364 void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx);
365 void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx);
366 void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx,
367 				    enum mipi_dsi_dcs_tear_mode mode);
368 void mipi_dsi_turn_on_peripheral_multi(struct mipi_dsi_multi_context *ctx);
369 void mipi_dsi_dcs_soft_reset_multi(struct mipi_dsi_multi_context *ctx);
370 void mipi_dsi_dcs_set_display_brightness_multi(struct mipi_dsi_multi_context *ctx,
371 					       u16 brightness);
372 void mipi_dsi_dcs_set_pixel_format_multi(struct mipi_dsi_multi_context *ctx,
373 					 u8 format);
374 void mipi_dsi_dcs_set_column_address_multi(struct mipi_dsi_multi_context *ctx,
375 					   u16 start, u16 end);
376 void mipi_dsi_dcs_set_page_address_multi(struct mipi_dsi_multi_context *ctx,
377 					 u16 start, u16 end);
378 void mipi_dsi_dcs_set_tear_scanline_multi(struct mipi_dsi_multi_context *ctx,
379 					  u16 scanline);
380 
381 /**
382  * mipi_dsi_generic_write_seq - transmit data using a generic write packet
383  *
384  * This macro will print errors for you and will RETURN FROM THE CALLING
385  * FUNCTION (yes this is non-intuitive) upon error.
386  *
387  * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED.
388  * Please replace calls of it with mipi_dsi_generic_write_seq_multi().
389  *
390  * @dsi: DSI peripheral device
391  * @seq: buffer containing the payload
392  */
393 #define mipi_dsi_generic_write_seq(dsi, seq...)                                \
394 	do {                                                                   \
395 		static const u8 d[] = { seq };                                 \
396 		int ret;                                                       \
397 		ret = mipi_dsi_generic_write_chatty(dsi, d, ARRAY_SIZE(d));    \
398 		if (ret < 0)                                                   \
399 			return ret;                                            \
400 	} while (0)
401 
402 /**
403  * mipi_dsi_generic_write_seq_multi - transmit data using a generic write packet
404  *
405  * This macro will print errors for you and error handling is optimized for
406  * callers that call this multiple times in a row.
407  *
408  * @ctx: Context for multiple DSI transactions
409  * @seq: buffer containing the payload
410  */
411 #define mipi_dsi_generic_write_seq_multi(ctx, seq...)                \
412 	do {                                                         \
413 		static const u8 d[] = { seq };                       \
414 		mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \
415 	} while (0)
416 
417 /**
418  * mipi_dsi_dcs_write_seq - transmit a DCS command with payload
419  *
420  * This macro will print errors for you and will RETURN FROM THE CALLING
421  * FUNCTION (yes this is non-intuitive) upon error.
422  *
423  * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED.
424  * Please replace calls of it with mipi_dsi_dcs_write_seq_multi().
425  *
426  * @dsi: DSI peripheral device
427  * @cmd: Command
428  * @seq: buffer containing data to be transmitted
429  */
430 #define mipi_dsi_dcs_write_seq(dsi, cmd, seq...)                               \
431 	do {                                                                   \
432 		static const u8 d[] = { cmd, seq };                            \
433 		int ret;                                                       \
434 		ret = mipi_dsi_dcs_write_buffer_chatty(dsi, d, ARRAY_SIZE(d)); \
435 		if (ret < 0)                                                   \
436 			return ret;                                            \
437 	} while (0)
438 
439 /**
440  * mipi_dsi_dcs_write_seq_multi - transmit a DCS command with payload
441  *
442  * This macro will print errors for you and error handling is optimized for
443  * callers that call this multiple times in a row.
444  *
445  * @ctx: Context for multiple DSI transactions
446  * @cmd: Command
447  * @seq: buffer containing data to be transmitted
448  */
449 #define mipi_dsi_dcs_write_seq_multi(ctx, cmd, seq...)                  \
450 	do {                                                            \
451 		static const u8 d[] = { cmd, seq };                     \
452 		mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \
453 	} while (0)
454 
455 /**
456  * struct mipi_dsi_driver - DSI driver
457  * @driver: device driver model driver
458  * @probe: callback for device binding
459  * @remove: callback for device unbinding
460  * @shutdown: called at shutdown time to quiesce the device
461  */
462 struct mipi_dsi_driver {
463 	struct device_driver driver;
464 	int(*probe)(struct mipi_dsi_device *dsi);
465 	void (*remove)(struct mipi_dsi_device *dsi);
466 	void (*shutdown)(struct mipi_dsi_device *dsi);
467 };
468 
469 static inline struct mipi_dsi_driver *
to_mipi_dsi_driver(struct device_driver * driver)470 to_mipi_dsi_driver(struct device_driver *driver)
471 {
472 	return container_of(driver, struct mipi_dsi_driver, driver);
473 }
474 
mipi_dsi_get_drvdata(const struct mipi_dsi_device * dsi)475 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
476 {
477 	return dev_get_drvdata(&dsi->dev);
478 }
479 
mipi_dsi_set_drvdata(struct mipi_dsi_device * dsi,void * data)480 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
481 {
482 	dev_set_drvdata(&dsi->dev, data);
483 }
484 
485 int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
486 				  struct module *owner);
487 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
488 
489 #define mipi_dsi_driver_register(driver) \
490 	mipi_dsi_driver_register_full(driver, THIS_MODULE)
491 
492 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
493 	module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
494 			mipi_dsi_driver_unregister)
495 
496 #endif /* __DRM_MIPI_DSI__ */
497