1 /*
2 * This file is part of the Chelsio T4 Ethernet driver for Linux.
3 *
4 * Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35 #include <linux/delay.h>
36 #include "cxgb4.h"
37 #include "t4_regs.h"
38 #include "t4_values.h"
39 #include "t4fw_api.h"
40 #include "t4fw_version.h"
41
42 /**
43 * t4_wait_op_done_val - wait until an operation is completed
44 * @adapter: the adapter performing the operation
45 * @reg: the register to check for completion
46 * @mask: a single-bit field within @reg that indicates completion
47 * @polarity: the value of the field when the operation is completed
48 * @attempts: number of check iterations
49 * @delay: delay in usecs between iterations
50 * @valp: where to store the value of the register at completion time
51 *
52 * Wait until an operation is completed by checking a bit in a register
53 * up to @attempts times. If @valp is not NULL the value of the register
54 * at the time it indicated completion is stored there. Returns 0 if the
55 * operation completes and -EAGAIN otherwise.
56 */
t4_wait_op_done_val(struct adapter * adapter,int reg,u32 mask,int polarity,int attempts,int delay,u32 * valp)57 static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
58 int polarity, int attempts, int delay, u32 *valp)
59 {
60 while (1) {
61 u32 val = t4_read_reg(adapter, reg);
62
63 if (!!(val & mask) == polarity) {
64 if (valp)
65 *valp = val;
66 return 0;
67 }
68 if (--attempts == 0)
69 return -EAGAIN;
70 if (delay)
71 udelay(delay);
72 }
73 }
74
t4_wait_op_done(struct adapter * adapter,int reg,u32 mask,int polarity,int attempts,int delay)75 static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask,
76 int polarity, int attempts, int delay)
77 {
78 return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts,
79 delay, NULL);
80 }
81
82 /**
83 * t4_set_reg_field - set a register field to a value
84 * @adapter: the adapter to program
85 * @addr: the register address
86 * @mask: specifies the portion of the register to modify
87 * @val: the new value for the register field
88 *
89 * Sets a register field specified by the supplied mask to the
90 * given value.
91 */
t4_set_reg_field(struct adapter * adapter,unsigned int addr,u32 mask,u32 val)92 void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
93 u32 val)
94 {
95 u32 v = t4_read_reg(adapter, addr) & ~mask;
96
97 t4_write_reg(adapter, addr, v | val);
98 (void) t4_read_reg(adapter, addr); /* flush */
99 }
100
101 /**
102 * t4_read_indirect - read indirectly addressed registers
103 * @adap: the adapter
104 * @addr_reg: register holding the indirect address
105 * @data_reg: register holding the value of the indirect register
106 * @vals: where the read register values are stored
107 * @nregs: how many indirect registers to read
108 * @start_idx: index of first indirect register to read
109 *
110 * Reads registers that are accessed indirectly through an address/data
111 * register pair.
112 */
t4_read_indirect(struct adapter * adap,unsigned int addr_reg,unsigned int data_reg,u32 * vals,unsigned int nregs,unsigned int start_idx)113 void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
114 unsigned int data_reg, u32 *vals,
115 unsigned int nregs, unsigned int start_idx)
116 {
117 while (nregs--) {
118 t4_write_reg(adap, addr_reg, start_idx);
119 *vals++ = t4_read_reg(adap, data_reg);
120 start_idx++;
121 }
122 }
123
124 /**
125 * t4_write_indirect - write indirectly addressed registers
126 * @adap: the adapter
127 * @addr_reg: register holding the indirect addresses
128 * @data_reg: register holding the value for the indirect registers
129 * @vals: values to write
130 * @nregs: how many indirect registers to write
131 * @start_idx: address of first indirect register to write
132 *
133 * Writes a sequential block of registers that are accessed indirectly
134 * through an address/data register pair.
135 */
t4_write_indirect(struct adapter * adap,unsigned int addr_reg,unsigned int data_reg,const u32 * vals,unsigned int nregs,unsigned int start_idx)136 void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
137 unsigned int data_reg, const u32 *vals,
138 unsigned int nregs, unsigned int start_idx)
139 {
140 while (nregs--) {
141 t4_write_reg(adap, addr_reg, start_idx++);
142 t4_write_reg(adap, data_reg, *vals++);
143 }
144 }
145
146 /*
147 * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor
148 * mechanism. This guarantees that we get the real value even if we're
149 * operating within a Virtual Machine and the Hypervisor is trapping our
150 * Configuration Space accesses.
151 */
t4_hw_pci_read_cfg4(struct adapter * adap,int reg,u32 * val)152 void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val)
153 {
154 u32 req = FUNCTION_V(adap->pf) | REGISTER_V(reg);
155
156 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
157 req |= ENABLE_F;
158 else
159 req |= T6_ENABLE_F;
160
161 if (is_t4(adap->params.chip))
162 req |= LOCALCFG_F;
163
164 t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, req);
165 *val = t4_read_reg(adap, PCIE_CFG_SPACE_DATA_A);
166
167 /* Reset ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a
168 * Configuration Space read. (None of the other fields matter when
169 * ENABLE is 0 so a simple register write is easier than a
170 * read-modify-write via t4_set_reg_field().)
171 */
172 t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, 0);
173 }
174
175 /*
176 * t4_report_fw_error - report firmware error
177 * @adap: the adapter
178 *
179 * The adapter firmware can indicate error conditions to the host.
180 * If the firmware has indicated an error, print out the reason for
181 * the firmware error.
182 */
t4_report_fw_error(struct adapter * adap)183 static void t4_report_fw_error(struct adapter *adap)
184 {
185 static const char *const reason[] = {
186 "Crash", /* PCIE_FW_EVAL_CRASH */
187 "During Device Preparation", /* PCIE_FW_EVAL_PREP */
188 "During Device Configuration", /* PCIE_FW_EVAL_CONF */
189 "During Device Initialization", /* PCIE_FW_EVAL_INIT */
190 "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
191 "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */
192 "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */
193 "Reserved", /* reserved */
194 };
195 u32 pcie_fw;
196
197 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
198 if (pcie_fw & PCIE_FW_ERR_F) {
199 dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n",
200 reason[PCIE_FW_EVAL_G(pcie_fw)]);
201 adap->flags &= ~CXGB4_FW_OK;
202 }
203 }
204
205 /*
206 * Get the reply to a mailbox command and store it in @rpl in big-endian order.
207 */
get_mbox_rpl(struct adapter * adap,__be64 * rpl,int nflit,u32 mbox_addr)208 static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
209 u32 mbox_addr)
210 {
211 for ( ; nflit; nflit--, mbox_addr += 8)
212 *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
213 }
214
215 /*
216 * Handle a FW assertion reported in a mailbox.
217 */
fw_asrt(struct adapter * adap,u32 mbox_addr)218 static void fw_asrt(struct adapter *adap, u32 mbox_addr)
219 {
220 struct fw_debug_cmd asrt;
221
222 get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
223 dev_alert(adap->pdev_dev,
224 "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
225 asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
226 be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
227 }
228
229 /**
230 * t4_record_mbox - record a Firmware Mailbox Command/Reply in the log
231 * @adapter: the adapter
232 * @cmd: the Firmware Mailbox Command or Reply
233 * @size: command length in bytes
234 * @access: the time (ms) needed to access the Firmware Mailbox
235 * @execute: the time (ms) the command spent being executed
236 */
t4_record_mbox(struct adapter * adapter,const __be64 * cmd,unsigned int size,int access,int execute)237 static void t4_record_mbox(struct adapter *adapter,
238 const __be64 *cmd, unsigned int size,
239 int access, int execute)
240 {
241 struct mbox_cmd_log *log = adapter->mbox_log;
242 struct mbox_cmd *entry;
243 int i;
244
245 entry = mbox_cmd_log_entry(log, log->cursor++);
246 if (log->cursor == log->size)
247 log->cursor = 0;
248
249 for (i = 0; i < size / 8; i++)
250 entry->cmd[i] = be64_to_cpu(cmd[i]);
251 while (i < MBOX_LEN / 8)
252 entry->cmd[i++] = 0;
253 entry->timestamp = jiffies;
254 entry->seqno = log->seqno++;
255 entry->access = access;
256 entry->execute = execute;
257 }
258
259 /**
260 * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
261 * @adap: the adapter
262 * @mbox: index of the mailbox to use
263 * @cmd: the command to write
264 * @size: command length in bytes
265 * @rpl: where to optionally store the reply
266 * @sleep_ok: if true we may sleep while awaiting command completion
267 * @timeout: time to wait for command to finish before timing out
268 *
269 * Sends the given command to FW through the selected mailbox and waits
270 * for the FW to execute the command. If @rpl is not %NULL it is used to
271 * store the FW's reply to the command. The command and its optional
272 * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms
273 * to respond. @sleep_ok determines whether we may sleep while awaiting
274 * the response. If sleeping is allowed we use progressive backoff
275 * otherwise we spin.
276 *
277 * The return value is 0 on success or a negative errno on failure. A
278 * failure can happen either because we are not able to execute the
279 * command or FW executes it but signals an error. In the latter case
280 * the return value is the error code indicated by FW (negated).
281 */
t4_wr_mbox_meat_timeout(struct adapter * adap,int mbox,const void * cmd,int size,void * rpl,bool sleep_ok,int timeout)282 int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd,
283 int size, void *rpl, bool sleep_ok, int timeout)
284 {
285 static const int delay[] = {
286 1, 1, 3, 5, 10, 10, 20, 50, 100, 200
287 };
288
289 struct mbox_list entry;
290 u16 access = 0;
291 u16 execute = 0;
292 u32 v;
293 u64 res;
294 int i, ms, delay_idx, ret;
295 const __be64 *p = cmd;
296 u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A);
297 u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A);
298 __be64 cmd_rpl[MBOX_LEN / 8];
299 u32 pcie_fw;
300
301 if ((size & 15) || size > MBOX_LEN)
302 return -EINVAL;
303
304 /*
305 * If the device is off-line, as in EEH, commands will time out.
306 * Fail them early so we don't waste time waiting.
307 */
308 if (adap->pdev->error_state != pci_channel_io_normal)
309 return -EIO;
310
311 /* If we have a negative timeout, that implies that we can't sleep. */
312 if (timeout < 0) {
313 sleep_ok = false;
314 timeout = -timeout;
315 }
316
317 /* Queue ourselves onto the mailbox access list. When our entry is at
318 * the front of the list, we have rights to access the mailbox. So we
319 * wait [for a while] till we're at the front [or bail out with an
320 * EBUSY] ...
321 */
322 spin_lock_bh(&adap->mbox_lock);
323 list_add_tail(&entry.list, &adap->mlist.list);
324 spin_unlock_bh(&adap->mbox_lock);
325
326 delay_idx = 0;
327 ms = delay[0];
328
329 for (i = 0; ; i += ms) {
330 /* If we've waited too long, return a busy indication. This
331 * really ought to be based on our initial position in the
332 * mailbox access list but this is a start. We very rarely
333 * contend on access to the mailbox ...
334 */
335 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
336 if (i > FW_CMD_MAX_TIMEOUT || (pcie_fw & PCIE_FW_ERR_F)) {
337 spin_lock_bh(&adap->mbox_lock);
338 list_del(&entry.list);
339 spin_unlock_bh(&adap->mbox_lock);
340 ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -EBUSY;
341 t4_record_mbox(adap, cmd, size, access, ret);
342 return ret;
343 }
344
345 /* If we're at the head, break out and start the mailbox
346 * protocol.
347 */
348 if (list_first_entry(&adap->mlist.list, struct mbox_list,
349 list) == &entry)
350 break;
351
352 /* Delay for a bit before checking again ... */
353 if (sleep_ok) {
354 ms = delay[delay_idx]; /* last element may repeat */
355 if (delay_idx < ARRAY_SIZE(delay) - 1)
356 delay_idx++;
357 msleep(ms);
358 } else {
359 mdelay(ms);
360 }
361 }
362
363 /* Loop trying to get ownership of the mailbox. Return an error
364 * if we can't gain ownership.
365 */
366 v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
367 for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
368 v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
369 if (v != MBOX_OWNER_DRV) {
370 spin_lock_bh(&adap->mbox_lock);
371 list_del(&entry.list);
372 spin_unlock_bh(&adap->mbox_lock);
373 ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT;
374 t4_record_mbox(adap, cmd, size, access, ret);
375 return ret;
376 }
377
378 /* Copy in the new mailbox command and send it on its way ... */
379 t4_record_mbox(adap, cmd, size, access, 0);
380 for (i = 0; i < size; i += 8)
381 t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));
382
383 t4_write_reg(adap, ctl_reg, MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW));
384 t4_read_reg(adap, ctl_reg); /* flush write */
385
386 delay_idx = 0;
387 ms = delay[0];
388
389 for (i = 0;
390 !((pcie_fw = t4_read_reg(adap, PCIE_FW_A)) & PCIE_FW_ERR_F) &&
391 i < timeout;
392 i += ms) {
393 if (sleep_ok) {
394 ms = delay[delay_idx]; /* last element may repeat */
395 if (delay_idx < ARRAY_SIZE(delay) - 1)
396 delay_idx++;
397 msleep(ms);
398 } else
399 mdelay(ms);
400
401 v = t4_read_reg(adap, ctl_reg);
402 if (MBOWNER_G(v) == MBOX_OWNER_DRV) {
403 if (!(v & MBMSGVALID_F)) {
404 t4_write_reg(adap, ctl_reg, 0);
405 continue;
406 }
407
408 get_mbox_rpl(adap, cmd_rpl, MBOX_LEN / 8, data_reg);
409 res = be64_to_cpu(cmd_rpl[0]);
410
411 if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) {
412 fw_asrt(adap, data_reg);
413 res = FW_CMD_RETVAL_V(EIO);
414 } else if (rpl) {
415 memcpy(rpl, cmd_rpl, size);
416 }
417
418 t4_write_reg(adap, ctl_reg, 0);
419
420 execute = i + ms;
421 t4_record_mbox(adap, cmd_rpl,
422 MBOX_LEN, access, execute);
423 spin_lock_bh(&adap->mbox_lock);
424 list_del(&entry.list);
425 spin_unlock_bh(&adap->mbox_lock);
426 return -FW_CMD_RETVAL_G((int)res);
427 }
428 }
429
430 ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -ETIMEDOUT;
431 t4_record_mbox(adap, cmd, size, access, ret);
432 dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
433 *(const u8 *)cmd, mbox);
434 t4_report_fw_error(adap);
435 spin_lock_bh(&adap->mbox_lock);
436 list_del(&entry.list);
437 spin_unlock_bh(&adap->mbox_lock);
438 t4_fatal_err(adap);
439 return ret;
440 }
441
t4_wr_mbox_meat(struct adapter * adap,int mbox,const void * cmd,int size,void * rpl,bool sleep_ok)442 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
443 void *rpl, bool sleep_ok)
444 {
445 return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
446 FW_CMD_MAX_TIMEOUT);
447 }
448
t4_edc_err_read(struct adapter * adap,int idx)449 static int t4_edc_err_read(struct adapter *adap, int idx)
450 {
451 u32 edc_ecc_err_addr_reg;
452 u32 rdata_reg;
453
454 if (is_t4(adap->params.chip)) {
455 CH_WARN(adap, "%s: T4 NOT supported.\n", __func__);
456 return 0;
457 }
458 if (idx != 0 && idx != 1) {
459 CH_WARN(adap, "%s: idx %d NOT supported.\n", __func__, idx);
460 return 0;
461 }
462
463 edc_ecc_err_addr_reg = EDC_T5_REG(EDC_H_ECC_ERR_ADDR_A, idx);
464 rdata_reg = EDC_T5_REG(EDC_H_BIST_STATUS_RDATA_A, idx);
465
466 CH_WARN(adap,
467 "edc%d err addr 0x%x: 0x%x.\n",
468 idx, edc_ecc_err_addr_reg,
469 t4_read_reg(adap, edc_ecc_err_addr_reg));
470 CH_WARN(adap,
471 "bist: 0x%x, status %llx %llx %llx %llx %llx %llx %llx %llx %llx.\n",
472 rdata_reg,
473 (unsigned long long)t4_read_reg64(adap, rdata_reg),
474 (unsigned long long)t4_read_reg64(adap, rdata_reg + 8),
475 (unsigned long long)t4_read_reg64(adap, rdata_reg + 16),
476 (unsigned long long)t4_read_reg64(adap, rdata_reg + 24),
477 (unsigned long long)t4_read_reg64(adap, rdata_reg + 32),
478 (unsigned long long)t4_read_reg64(adap, rdata_reg + 40),
479 (unsigned long long)t4_read_reg64(adap, rdata_reg + 48),
480 (unsigned long long)t4_read_reg64(adap, rdata_reg + 56),
481 (unsigned long long)t4_read_reg64(adap, rdata_reg + 64));
482
483 return 0;
484 }
485
486 /**
487 * t4_memory_rw_init - Get memory window relative offset, base, and size.
488 * @adap: the adapter
489 * @win: PCI-E Memory Window to use
490 * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_HMA or MEM_MC
491 * @mem_off: memory relative offset with respect to @mtype.
492 * @mem_base: configured memory base address.
493 * @mem_aperture: configured memory window aperture.
494 *
495 * Get the configured memory window's relative offset, base, and size.
496 */
t4_memory_rw_init(struct adapter * adap,int win,int mtype,u32 * mem_off,u32 * mem_base,u32 * mem_aperture)497 int t4_memory_rw_init(struct adapter *adap, int win, int mtype, u32 *mem_off,
498 u32 *mem_base, u32 *mem_aperture)
499 {
500 u32 edc_size, mc_size, mem_reg;
501
502 /* Offset into the region of memory which is being accessed
503 * MEM_EDC0 = 0
504 * MEM_EDC1 = 1
505 * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller
506 * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5)
507 * MEM_HMA = 4
508 */
509 edc_size = EDRAM0_SIZE_G(t4_read_reg(adap, MA_EDRAM0_BAR_A));
510 if (mtype == MEM_HMA) {
511 *mem_off = 2 * (edc_size * 1024 * 1024);
512 } else if (mtype != MEM_MC1) {
513 *mem_off = (mtype * (edc_size * 1024 * 1024));
514 } else {
515 mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap,
516 MA_EXT_MEMORY0_BAR_A));
517 *mem_off = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
518 }
519
520 /* Each PCI-E Memory Window is programmed with a window size -- or
521 * "aperture" -- which controls the granularity of its mapping onto
522 * adapter memory. We need to grab that aperture in order to know
523 * how to use the specified window. The window is also programmed
524 * with the base address of the Memory Window in BAR0's address
525 * space. For T4 this is an absolute PCI-E Bus Address. For T5
526 * the address is relative to BAR0.
527 */
528 mem_reg = t4_read_reg(adap,
529 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A,
530 win));
531 /* a dead adapter will return 0xffffffff for PIO reads */
532 if (mem_reg == 0xffffffff)
533 return -ENXIO;
534
535 *mem_aperture = 1 << (WINDOW_G(mem_reg) + WINDOW_SHIFT_X);
536 *mem_base = PCIEOFST_G(mem_reg) << PCIEOFST_SHIFT_X;
537 if (is_t4(adap->params.chip))
538 *mem_base -= adap->t4_bar0;
539
540 return 0;
541 }
542
543 /**
544 * t4_memory_update_win - Move memory window to specified address.
545 * @adap: the adapter
546 * @win: PCI-E Memory Window to use
547 * @addr: location to move.
548 *
549 * Move memory window to specified address.
550 */
t4_memory_update_win(struct adapter * adap,int win,u32 addr)551 void t4_memory_update_win(struct adapter *adap, int win, u32 addr)
552 {
553 t4_write_reg(adap,
554 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win),
555 addr);
556 /* Read it back to ensure that changes propagate before we
557 * attempt to use the new value.
558 */
559 t4_read_reg(adap,
560 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
561 }
562
563 /**
564 * t4_memory_rw_residual - Read/Write residual data.
565 * @adap: the adapter
566 * @off: relative offset within residual to start read/write.
567 * @addr: address within indicated memory type.
568 * @buf: host memory buffer
569 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
570 *
571 * Read/Write residual data less than 32-bits.
572 */
t4_memory_rw_residual(struct adapter * adap,u32 off,u32 addr,u8 * buf,int dir)573 void t4_memory_rw_residual(struct adapter *adap, u32 off, u32 addr, u8 *buf,
574 int dir)
575 {
576 union {
577 u32 word;
578 char byte[4];
579 } last;
580 unsigned char *bp;
581 int i;
582
583 if (dir == T4_MEMORY_READ) {
584 last.word = le32_to_cpu((__force __le32)
585 t4_read_reg(adap, addr));
586 for (bp = (unsigned char *)buf, i = off; i < 4; i++)
587 bp[i] = last.byte[i];
588 } else {
589 last.word = *buf;
590 for (i = off; i < 4; i++)
591 last.byte[i] = 0;
592 t4_write_reg(adap, addr,
593 (__force u32)cpu_to_le32(last.word));
594 }
595 }
596
597 /**
598 * t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
599 * @adap: the adapter
600 * @win: PCI-E Memory Window to use
601 * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
602 * @addr: address within indicated memory type
603 * @len: amount of memory to transfer
604 * @hbuf: host memory buffer
605 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
606 *
607 * Reads/writes an [almost] arbitrary memory region in the firmware: the
608 * firmware memory address and host buffer must be aligned on 32-bit
609 * boundaries; the length may be arbitrary. The memory is transferred as
610 * a raw byte sequence from/to the firmware's memory. If this memory
611 * contains data structures which contain multi-byte integers, it's the
612 * caller's responsibility to perform appropriate byte order conversions.
613 */
t4_memory_rw(struct adapter * adap,int win,int mtype,u32 addr,u32 len,void * hbuf,int dir)614 int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
615 u32 len, void *hbuf, int dir)
616 {
617 u32 pos, offset, resid, memoffset;
618 u32 win_pf, mem_aperture, mem_base;
619 u32 *buf;
620 int ret;
621
622 /* Argument sanity checks ...
623 */
624 if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
625 return -EINVAL;
626 buf = (u32 *)hbuf;
627
628 /* It's convenient to be able to handle lengths which aren't a
629 * multiple of 32-bits because we often end up transferring files to
630 * the firmware. So we'll handle that by normalizing the length here
631 * and then handling any residual transfer at the end.
632 */
633 resid = len & 0x3;
634 len -= resid;
635
636 ret = t4_memory_rw_init(adap, win, mtype, &memoffset, &mem_base,
637 &mem_aperture);
638 if (ret)
639 return ret;
640
641 /* Determine the PCIE_MEM_ACCESS_OFFSET */
642 addr = addr + memoffset;
643
644 win_pf = is_t4(adap->params.chip) ? 0 : PFNUM_V(adap->pf);
645
646 /* Calculate our initial PCI-E Memory Window Position and Offset into
647 * that Window.
648 */
649 pos = addr & ~(mem_aperture - 1);
650 offset = addr - pos;
651
652 /* Set up initial PCI-E Memory Window to cover the start of our
653 * transfer.
654 */
655 t4_memory_update_win(adap, win, pos | win_pf);
656
657 /* Transfer data to/from the adapter as long as there's an integral
658 * number of 32-bit transfers to complete.
659 *
660 * A note on Endianness issues:
661 *
662 * The "register" reads and writes below from/to the PCI-E Memory
663 * Window invoke the standard adapter Big-Endian to PCI-E Link
664 * Little-Endian "swizzel." As a result, if we have the following
665 * data in adapter memory:
666 *
667 * Memory: ... | b0 | b1 | b2 | b3 | ...
668 * Address: i+0 i+1 i+2 i+3
669 *
670 * Then a read of the adapter memory via the PCI-E Memory Window
671 * will yield:
672 *
673 * x = readl(i)
674 * 31 0
675 * [ b3 | b2 | b1 | b0 ]
676 *
677 * If this value is stored into local memory on a Little-Endian system
678 * it will show up correctly in local memory as:
679 *
680 * ( ..., b0, b1, b2, b3, ... )
681 *
682 * But on a Big-Endian system, the store will show up in memory
683 * incorrectly swizzled as:
684 *
685 * ( ..., b3, b2, b1, b0, ... )
686 *
687 * So we need to account for this in the reads and writes to the
688 * PCI-E Memory Window below by undoing the register read/write
689 * swizzels.
690 */
691 while (len > 0) {
692 if (dir == T4_MEMORY_READ)
693 *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap,
694 mem_base + offset));
695 else
696 t4_write_reg(adap, mem_base + offset,
697 (__force u32)cpu_to_le32(*buf++));
698 offset += sizeof(__be32);
699 len -= sizeof(__be32);
700
701 /* If we've reached the end of our current window aperture,
702 * move the PCI-E Memory Window on to the next. Note that
703 * doing this here after "len" may be 0 allows us to set up
704 * the PCI-E Memory Window for a possible final residual
705 * transfer below ...
706 */
707 if (offset == mem_aperture) {
708 pos += mem_aperture;
709 offset = 0;
710 t4_memory_update_win(adap, win, pos | win_pf);
711 }
712 }
713
714 /* If the original transfer had a length which wasn't a multiple of
715 * 32-bits, now's where we need to finish off the transfer of the
716 * residual amount. The PCI-E Memory Window has already been moved
717 * above (if necessary) to cover this final transfer.
718 */
719 if (resid)
720 t4_memory_rw_residual(adap, resid, mem_base + offset,
721 (u8 *)buf, dir);
722
723 return 0;
724 }
725
726 /* Return the specified PCI-E Configuration Space register from our Physical
727 * Function. We try first via a Firmware LDST Command since we prefer to let
728 * the firmware own all of these registers, but if that fails we go for it
729 * directly ourselves.
730 */
t4_read_pcie_cfg4(struct adapter * adap,int reg)731 u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
732 {
733 u32 val, ldst_addrspace;
734
735 /* If fw_attach != 0, construct and send the Firmware LDST Command to
736 * retrieve the specified PCI-E Configuration Space register.
737 */
738 struct fw_ldst_cmd ldst_cmd;
739 int ret;
740
741 memset(&ldst_cmd, 0, sizeof(ldst_cmd));
742 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE);
743 ldst_cmd.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
744 FW_CMD_REQUEST_F |
745 FW_CMD_READ_F |
746 ldst_addrspace);
747 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
748 ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
749 ldst_cmd.u.pcie.ctrl_to_fn =
750 (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->pf));
751 ldst_cmd.u.pcie.r = reg;
752
753 /* If the LDST Command succeeds, return the result, otherwise
754 * fall through to reading it directly ourselves ...
755 */
756 ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
757 &ldst_cmd);
758 if (ret == 0)
759 val = be32_to_cpu(ldst_cmd.u.pcie.data[0]);
760 else
761 /* Read the desired Configuration Space register via the PCI-E
762 * Backdoor mechanism.
763 */
764 t4_hw_pci_read_cfg4(adap, reg, &val);
765 return val;
766 }
767
768 /* Get the window based on base passed to it.
769 * Window aperture is currently unhandled, but there is no use case for it
770 * right now
771 */
t4_get_window(struct adapter * adap,u32 pci_base,u64 pci_mask,u32 memwin_base)772 static u32 t4_get_window(struct adapter *adap, u32 pci_base, u64 pci_mask,
773 u32 memwin_base)
774 {
775 u32 ret;
776
777 if (is_t4(adap->params.chip)) {
778 u32 bar0;
779
780 /* Truncation intentional: we only read the bottom 32-bits of
781 * the 64-bit BAR0/BAR1 ... We use the hardware backdoor
782 * mechanism to read BAR0 instead of using
783 * pci_resource_start() because we could be operating from
784 * within a Virtual Machine which is trapping our accesses to
785 * our Configuration Space and we need to set up the PCI-E
786 * Memory Window decoders with the actual addresses which will
787 * be coming across the PCI-E link.
788 */
789 bar0 = t4_read_pcie_cfg4(adap, pci_base);
790 bar0 &= pci_mask;
791 adap->t4_bar0 = bar0;
792
793 ret = bar0 + memwin_base;
794 } else {
795 /* For T5, only relative offset inside the PCIe BAR is passed */
796 ret = memwin_base;
797 }
798 return ret;
799 }
800
801 /* Get the default utility window (win0) used by everyone */
t4_get_util_window(struct adapter * adap)802 u32 t4_get_util_window(struct adapter *adap)
803 {
804 return t4_get_window(adap, PCI_BASE_ADDRESS_0,
805 PCI_BASE_ADDRESS_MEM_MASK, MEMWIN0_BASE);
806 }
807
808 /* Set up memory window for accessing adapter memory ranges. (Read
809 * back MA register to ensure that changes propagate before we attempt
810 * to use the new values.)
811 */
t4_setup_memwin(struct adapter * adap,u32 memwin_base,u32 window)812 void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window)
813 {
814 t4_write_reg(adap,
815 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window),
816 memwin_base | BIR_V(0) |
817 WINDOW_V(ilog2(MEMWIN0_APERTURE) - WINDOW_SHIFT_X));
818 t4_read_reg(adap,
819 PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window));
820 }
821
822 /**
823 * t4_get_regs_len - return the size of the chips register set
824 * @adapter: the adapter
825 *
826 * Returns the size of the chip's BAR0 register space.
827 */
t4_get_regs_len(struct adapter * adapter)828 unsigned int t4_get_regs_len(struct adapter *adapter)
829 {
830 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
831
832 switch (chip_version) {
833 case CHELSIO_T4:
834 return T4_REGMAP_SIZE;
835
836 case CHELSIO_T5:
837 case CHELSIO_T6:
838 return T5_REGMAP_SIZE;
839 }
840
841 dev_err(adapter->pdev_dev,
842 "Unsupported chip version %d\n", chip_version);
843 return 0;
844 }
845
846 /**
847 * t4_get_regs - read chip registers into provided buffer
848 * @adap: the adapter
849 * @buf: register buffer
850 * @buf_size: size (in bytes) of register buffer
851 *
852 * If the provided register buffer isn't large enough for the chip's
853 * full register range, the register dump will be truncated to the
854 * register buffer's size.
855 */
t4_get_regs(struct adapter * adap,void * buf,size_t buf_size)856 void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
857 {
858 static const unsigned int t4_reg_ranges[] = {
859 0x1008, 0x1108,
860 0x1180, 0x1184,
861 0x1190, 0x1194,
862 0x11a0, 0x11a4,
863 0x11b0, 0x11b4,
864 0x11fc, 0x123c,
865 0x1300, 0x173c,
866 0x1800, 0x18fc,
867 0x3000, 0x30d8,
868 0x30e0, 0x30e4,
869 0x30ec, 0x5910,
870 0x5920, 0x5924,
871 0x5960, 0x5960,
872 0x5968, 0x5968,
873 0x5970, 0x5970,
874 0x5978, 0x5978,
875 0x5980, 0x5980,
876 0x5988, 0x5988,
877 0x5990, 0x5990,
878 0x5998, 0x5998,
879 0x59a0, 0x59d4,
880 0x5a00, 0x5ae0,
881 0x5ae8, 0x5ae8,
882 0x5af0, 0x5af0,
883 0x5af8, 0x5af8,
884 0x6000, 0x6098,
885 0x6100, 0x6150,
886 0x6200, 0x6208,
887 0x6240, 0x6248,
888 0x6280, 0x62b0,
889 0x62c0, 0x6338,
890 0x6370, 0x638c,
891 0x6400, 0x643c,
892 0x6500, 0x6524,
893 0x6a00, 0x6a04,
894 0x6a14, 0x6a38,
895 0x6a60, 0x6a70,
896 0x6a78, 0x6a78,
897 0x6b00, 0x6b0c,
898 0x6b1c, 0x6b84,
899 0x6bf0, 0x6bf8,
900 0x6c00, 0x6c0c,
901 0x6c1c, 0x6c84,
902 0x6cf0, 0x6cf8,
903 0x6d00, 0x6d0c,
904 0x6d1c, 0x6d84,
905 0x6df0, 0x6df8,
906 0x6e00, 0x6e0c,
907 0x6e1c, 0x6e84,
908 0x6ef0, 0x6ef8,
909 0x6f00, 0x6f0c,
910 0x6f1c, 0x6f84,
911 0x6ff0, 0x6ff8,
912 0x7000, 0x700c,
913 0x701c, 0x7084,
914 0x70f0, 0x70f8,
915 0x7100, 0x710c,
916 0x711c, 0x7184,
917 0x71f0, 0x71f8,
918 0x7200, 0x720c,
919 0x721c, 0x7284,
920 0x72f0, 0x72f8,
921 0x7300, 0x730c,
922 0x731c, 0x7384,
923 0x73f0, 0x73f8,
924 0x7400, 0x7450,
925 0x7500, 0x7530,
926 0x7600, 0x760c,
927 0x7614, 0x761c,
928 0x7680, 0x76cc,
929 0x7700, 0x7798,
930 0x77c0, 0x77fc,
931 0x7900, 0x79fc,
932 0x7b00, 0x7b58,
933 0x7b60, 0x7b84,
934 0x7b8c, 0x7c38,
935 0x7d00, 0x7d38,
936 0x7d40, 0x7d80,
937 0x7d8c, 0x7ddc,
938 0x7de4, 0x7e04,
939 0x7e10, 0x7e1c,
940 0x7e24, 0x7e38,
941 0x7e40, 0x7e44,
942 0x7e4c, 0x7e78,
943 0x7e80, 0x7ea4,
944 0x7eac, 0x7edc,
945 0x7ee8, 0x7efc,
946 0x8dc0, 0x8e04,
947 0x8e10, 0x8e1c,
948 0x8e30, 0x8e78,
949 0x8ea0, 0x8eb8,
950 0x8ec0, 0x8f6c,
951 0x8fc0, 0x9008,
952 0x9010, 0x9058,
953 0x9060, 0x9060,
954 0x9068, 0x9074,
955 0x90fc, 0x90fc,
956 0x9400, 0x9408,
957 0x9410, 0x9458,
958 0x9600, 0x9600,
959 0x9608, 0x9638,
960 0x9640, 0x96bc,
961 0x9800, 0x9808,
962 0x9820, 0x983c,
963 0x9850, 0x9864,
964 0x9c00, 0x9c6c,
965 0x9c80, 0x9cec,
966 0x9d00, 0x9d6c,
967 0x9d80, 0x9dec,
968 0x9e00, 0x9e6c,
969 0x9e80, 0x9eec,
970 0x9f00, 0x9f6c,
971 0x9f80, 0x9fec,
972 0xd004, 0xd004,
973 0xd010, 0xd03c,
974 0xdfc0, 0xdfe0,
975 0xe000, 0xea7c,
976 0xf000, 0x11110,
977 0x11118, 0x11190,
978 0x19040, 0x1906c,
979 0x19078, 0x19080,
980 0x1908c, 0x190e4,
981 0x190f0, 0x190f8,
982 0x19100, 0x19110,
983 0x19120, 0x19124,
984 0x19150, 0x19194,
985 0x1919c, 0x191b0,
986 0x191d0, 0x191e8,
987 0x19238, 0x1924c,
988 0x193f8, 0x1943c,
989 0x1944c, 0x19474,
990 0x19490, 0x194e0,
991 0x194f0, 0x194f8,
992 0x19800, 0x19c08,
993 0x19c10, 0x19c90,
994 0x19ca0, 0x19ce4,
995 0x19cf0, 0x19d40,
996 0x19d50, 0x19d94,
997 0x19da0, 0x19de8,
998 0x19df0, 0x19e40,
999 0x19e50, 0x19e90,
1000 0x19ea0, 0x19f4c,
1001 0x1a000, 0x1a004,
1002 0x1a010, 0x1a06c,
1003 0x1a0b0, 0x1a0e4,
1004 0x1a0ec, 0x1a0f4,
1005 0x1a100, 0x1a108,
1006 0x1a114, 0x1a120,
1007 0x1a128, 0x1a130,
1008 0x1a138, 0x1a138,
1009 0x1a190, 0x1a1c4,
1010 0x1a1fc, 0x1a1fc,
1011 0x1e040, 0x1e04c,
1012 0x1e284, 0x1e28c,
1013 0x1e2c0, 0x1e2c0,
1014 0x1e2e0, 0x1e2e0,
1015 0x1e300, 0x1e384,
1016 0x1e3c0, 0x1e3c8,
1017 0x1e440, 0x1e44c,
1018 0x1e684, 0x1e68c,
1019 0x1e6c0, 0x1e6c0,
1020 0x1e6e0, 0x1e6e0,
1021 0x1e700, 0x1e784,
1022 0x1e7c0, 0x1e7c8,
1023 0x1e840, 0x1e84c,
1024 0x1ea84, 0x1ea8c,
1025 0x1eac0, 0x1eac0,
1026 0x1eae0, 0x1eae0,
1027 0x1eb00, 0x1eb84,
1028 0x1ebc0, 0x1ebc8,
1029 0x1ec40, 0x1ec4c,
1030 0x1ee84, 0x1ee8c,
1031 0x1eec0, 0x1eec0,
1032 0x1eee0, 0x1eee0,
1033 0x1ef00, 0x1ef84,
1034 0x1efc0, 0x1efc8,
1035 0x1f040, 0x1f04c,
1036 0x1f284, 0x1f28c,
1037 0x1f2c0, 0x1f2c0,
1038 0x1f2e0, 0x1f2e0,
1039 0x1f300, 0x1f384,
1040 0x1f3c0, 0x1f3c8,
1041 0x1f440, 0x1f44c,
1042 0x1f684, 0x1f68c,
1043 0x1f6c0, 0x1f6c0,
1044 0x1f6e0, 0x1f6e0,
1045 0x1f700, 0x1f784,
1046 0x1f7c0, 0x1f7c8,
1047 0x1f840, 0x1f84c,
1048 0x1fa84, 0x1fa8c,
1049 0x1fac0, 0x1fac0,
1050 0x1fae0, 0x1fae0,
1051 0x1fb00, 0x1fb84,
1052 0x1fbc0, 0x1fbc8,
1053 0x1fc40, 0x1fc4c,
1054 0x1fe84, 0x1fe8c,
1055 0x1fec0, 0x1fec0,
1056 0x1fee0, 0x1fee0,
1057 0x1ff00, 0x1ff84,
1058 0x1ffc0, 0x1ffc8,
1059 0x20000, 0x2002c,
1060 0x20100, 0x2013c,
1061 0x20190, 0x201a0,
1062 0x201a8, 0x201b8,
1063 0x201c4, 0x201c8,
1064 0x20200, 0x20318,
1065 0x20400, 0x204b4,
1066 0x204c0, 0x20528,
1067 0x20540, 0x20614,
1068 0x21000, 0x21040,
1069 0x2104c, 0x21060,
1070 0x210c0, 0x210ec,
1071 0x21200, 0x21268,
1072 0x21270, 0x21284,
1073 0x212fc, 0x21388,
1074 0x21400, 0x21404,
1075 0x21500, 0x21500,
1076 0x21510, 0x21518,
1077 0x2152c, 0x21530,
1078 0x2153c, 0x2153c,
1079 0x21550, 0x21554,
1080 0x21600, 0x21600,
1081 0x21608, 0x2161c,
1082 0x21624, 0x21628,
1083 0x21630, 0x21634,
1084 0x2163c, 0x2163c,
1085 0x21700, 0x2171c,
1086 0x21780, 0x2178c,
1087 0x21800, 0x21818,
1088 0x21820, 0x21828,
1089 0x21830, 0x21848,
1090 0x21850, 0x21854,
1091 0x21860, 0x21868,
1092 0x21870, 0x21870,
1093 0x21878, 0x21898,
1094 0x218a0, 0x218a8,
1095 0x218b0, 0x218c8,
1096 0x218d0, 0x218d4,
1097 0x218e0, 0x218e8,
1098 0x218f0, 0x218f0,
1099 0x218f8, 0x21a18,
1100 0x21a20, 0x21a28,
1101 0x21a30, 0x21a48,
1102 0x21a50, 0x21a54,
1103 0x21a60, 0x21a68,
1104 0x21a70, 0x21a70,
1105 0x21a78, 0x21a98,
1106 0x21aa0, 0x21aa8,
1107 0x21ab0, 0x21ac8,
1108 0x21ad0, 0x21ad4,
1109 0x21ae0, 0x21ae8,
1110 0x21af0, 0x21af0,
1111 0x21af8, 0x21c18,
1112 0x21c20, 0x21c20,
1113 0x21c28, 0x21c30,
1114 0x21c38, 0x21c38,
1115 0x21c80, 0x21c98,
1116 0x21ca0, 0x21ca8,
1117 0x21cb0, 0x21cc8,
1118 0x21cd0, 0x21cd4,
1119 0x21ce0, 0x21ce8,
1120 0x21cf0, 0x21cf0,
1121 0x21cf8, 0x21d7c,
1122 0x21e00, 0x21e04,
1123 0x22000, 0x2202c,
1124 0x22100, 0x2213c,
1125 0x22190, 0x221a0,
1126 0x221a8, 0x221b8,
1127 0x221c4, 0x221c8,
1128 0x22200, 0x22318,
1129 0x22400, 0x224b4,
1130 0x224c0, 0x22528,
1131 0x22540, 0x22614,
1132 0x23000, 0x23040,
1133 0x2304c, 0x23060,
1134 0x230c0, 0x230ec,
1135 0x23200, 0x23268,
1136 0x23270, 0x23284,
1137 0x232fc, 0x23388,
1138 0x23400, 0x23404,
1139 0x23500, 0x23500,
1140 0x23510, 0x23518,
1141 0x2352c, 0x23530,
1142 0x2353c, 0x2353c,
1143 0x23550, 0x23554,
1144 0x23600, 0x23600,
1145 0x23608, 0x2361c,
1146 0x23624, 0x23628,
1147 0x23630, 0x23634,
1148 0x2363c, 0x2363c,
1149 0x23700, 0x2371c,
1150 0x23780, 0x2378c,
1151 0x23800, 0x23818,
1152 0x23820, 0x23828,
1153 0x23830, 0x23848,
1154 0x23850, 0x23854,
1155 0x23860, 0x23868,
1156 0x23870, 0x23870,
1157 0x23878, 0x23898,
1158 0x238a0, 0x238a8,
1159 0x238b0, 0x238c8,
1160 0x238d0, 0x238d4,
1161 0x238e0, 0x238e8,
1162 0x238f0, 0x238f0,
1163 0x238f8, 0x23a18,
1164 0x23a20, 0x23a28,
1165 0x23a30, 0x23a48,
1166 0x23a50, 0x23a54,
1167 0x23a60, 0x23a68,
1168 0x23a70, 0x23a70,
1169 0x23a78, 0x23a98,
1170 0x23aa0, 0x23aa8,
1171 0x23ab0, 0x23ac8,
1172 0x23ad0, 0x23ad4,
1173 0x23ae0, 0x23ae8,
1174 0x23af0, 0x23af0,
1175 0x23af8, 0x23c18,
1176 0x23c20, 0x23c20,
1177 0x23c28, 0x23c30,
1178 0x23c38, 0x23c38,
1179 0x23c80, 0x23c98,
1180 0x23ca0, 0x23ca8,
1181 0x23cb0, 0x23cc8,
1182 0x23cd0, 0x23cd4,
1183 0x23ce0, 0x23ce8,
1184 0x23cf0, 0x23cf0,
1185 0x23cf8, 0x23d7c,
1186 0x23e00, 0x23e04,
1187 0x24000, 0x2402c,
1188 0x24100, 0x2413c,
1189 0x24190, 0x241a0,
1190 0x241a8, 0x241b8,
1191 0x241c4, 0x241c8,
1192 0x24200, 0x24318,
1193 0x24400, 0x244b4,
1194 0x244c0, 0x24528,
1195 0x24540, 0x24614,
1196 0x25000, 0x25040,
1197 0x2504c, 0x25060,
1198 0x250c0, 0x250ec,
1199 0x25200, 0x25268,
1200 0x25270, 0x25284,
1201 0x252fc, 0x25388,
1202 0x25400, 0x25404,
1203 0x25500, 0x25500,
1204 0x25510, 0x25518,
1205 0x2552c, 0x25530,
1206 0x2553c, 0x2553c,
1207 0x25550, 0x25554,
1208 0x25600, 0x25600,
1209 0x25608, 0x2561c,
1210 0x25624, 0x25628,
1211 0x25630, 0x25634,
1212 0x2563c, 0x2563c,
1213 0x25700, 0x2571c,
1214 0x25780, 0x2578c,
1215 0x25800, 0x25818,
1216 0x25820, 0x25828,
1217 0x25830, 0x25848,
1218 0x25850, 0x25854,
1219 0x25860, 0x25868,
1220 0x25870, 0x25870,
1221 0x25878, 0x25898,
1222 0x258a0, 0x258a8,
1223 0x258b0, 0x258c8,
1224 0x258d0, 0x258d4,
1225 0x258e0, 0x258e8,
1226 0x258f0, 0x258f0,
1227 0x258f8, 0x25a18,
1228 0x25a20, 0x25a28,
1229 0x25a30, 0x25a48,
1230 0x25a50, 0x25a54,
1231 0x25a60, 0x25a68,
1232 0x25a70, 0x25a70,
1233 0x25a78, 0x25a98,
1234 0x25aa0, 0x25aa8,
1235 0x25ab0, 0x25ac8,
1236 0x25ad0, 0x25ad4,
1237 0x25ae0, 0x25ae8,
1238 0x25af0, 0x25af0,
1239 0x25af8, 0x25c18,
1240 0x25c20, 0x25c20,
1241 0x25c28, 0x25c30,
1242 0x25c38, 0x25c38,
1243 0x25c80, 0x25c98,
1244 0x25ca0, 0x25ca8,
1245 0x25cb0, 0x25cc8,
1246 0x25cd0, 0x25cd4,
1247 0x25ce0, 0x25ce8,
1248 0x25cf0, 0x25cf0,
1249 0x25cf8, 0x25d7c,
1250 0x25e00, 0x25e04,
1251 0x26000, 0x2602c,
1252 0x26100, 0x2613c,
1253 0x26190, 0x261a0,
1254 0x261a8, 0x261b8,
1255 0x261c4, 0x261c8,
1256 0x26200, 0x26318,
1257 0x26400, 0x264b4,
1258 0x264c0, 0x26528,
1259 0x26540, 0x26614,
1260 0x27000, 0x27040,
1261 0x2704c, 0x27060,
1262 0x270c0, 0x270ec,
1263 0x27200, 0x27268,
1264 0x27270, 0x27284,
1265 0x272fc, 0x27388,
1266 0x27400, 0x27404,
1267 0x27500, 0x27500,
1268 0x27510, 0x27518,
1269 0x2752c, 0x27530,
1270 0x2753c, 0x2753c,
1271 0x27550, 0x27554,
1272 0x27600, 0x27600,
1273 0x27608, 0x2761c,
1274 0x27624, 0x27628,
1275 0x27630, 0x27634,
1276 0x2763c, 0x2763c,
1277 0x27700, 0x2771c,
1278 0x27780, 0x2778c,
1279 0x27800, 0x27818,
1280 0x27820, 0x27828,
1281 0x27830, 0x27848,
1282 0x27850, 0x27854,
1283 0x27860, 0x27868,
1284 0x27870, 0x27870,
1285 0x27878, 0x27898,
1286 0x278a0, 0x278a8,
1287 0x278b0, 0x278c8,
1288 0x278d0, 0x278d4,
1289 0x278e0, 0x278e8,
1290 0x278f0, 0x278f0,
1291 0x278f8, 0x27a18,
1292 0x27a20, 0x27a28,
1293 0x27a30, 0x27a48,
1294 0x27a50, 0x27a54,
1295 0x27a60, 0x27a68,
1296 0x27a70, 0x27a70,
1297 0x27a78, 0x27a98,
1298 0x27aa0, 0x27aa8,
1299 0x27ab0, 0x27ac8,
1300 0x27ad0, 0x27ad4,
1301 0x27ae0, 0x27ae8,
1302 0x27af0, 0x27af0,
1303 0x27af8, 0x27c18,
1304 0x27c20, 0x27c20,
1305 0x27c28, 0x27c30,
1306 0x27c38, 0x27c38,
1307 0x27c80, 0x27c98,
1308 0x27ca0, 0x27ca8,
1309 0x27cb0, 0x27cc8,
1310 0x27cd0, 0x27cd4,
1311 0x27ce0, 0x27ce8,
1312 0x27cf0, 0x27cf0,
1313 0x27cf8, 0x27d7c,
1314 0x27e00, 0x27e04,
1315 };
1316
1317 static const unsigned int t5_reg_ranges[] = {
1318 0x1008, 0x10c0,
1319 0x10cc, 0x10f8,
1320 0x1100, 0x1100,
1321 0x110c, 0x1148,
1322 0x1180, 0x1184,
1323 0x1190, 0x1194,
1324 0x11a0, 0x11a4,
1325 0x11b0, 0x11b4,
1326 0x11fc, 0x123c,
1327 0x1280, 0x173c,
1328 0x1800, 0x18fc,
1329 0x3000, 0x3028,
1330 0x3060, 0x30b0,
1331 0x30b8, 0x30d8,
1332 0x30e0, 0x30fc,
1333 0x3140, 0x357c,
1334 0x35a8, 0x35cc,
1335 0x35ec, 0x35ec,
1336 0x3600, 0x5624,
1337 0x56cc, 0x56ec,
1338 0x56f4, 0x5720,
1339 0x5728, 0x575c,
1340 0x580c, 0x5814,
1341 0x5890, 0x589c,
1342 0x58a4, 0x58ac,
1343 0x58b8, 0x58bc,
1344 0x5940, 0x59c8,
1345 0x59d0, 0x59dc,
1346 0x59fc, 0x5a18,
1347 0x5a60, 0x5a70,
1348 0x5a80, 0x5a9c,
1349 0x5b94, 0x5bfc,
1350 0x6000, 0x6020,
1351 0x6028, 0x6040,
1352 0x6058, 0x609c,
1353 0x60a8, 0x614c,
1354 0x7700, 0x7798,
1355 0x77c0, 0x78fc,
1356 0x7b00, 0x7b58,
1357 0x7b60, 0x7b84,
1358 0x7b8c, 0x7c54,
1359 0x7d00, 0x7d38,
1360 0x7d40, 0x7d80,
1361 0x7d8c, 0x7ddc,
1362 0x7de4, 0x7e04,
1363 0x7e10, 0x7e1c,
1364 0x7e24, 0x7e38,
1365 0x7e40, 0x7e44,
1366 0x7e4c, 0x7e78,
1367 0x7e80, 0x7edc,
1368 0x7ee8, 0x7efc,
1369 0x8dc0, 0x8de0,
1370 0x8df8, 0x8e04,
1371 0x8e10, 0x8e84,
1372 0x8ea0, 0x8f84,
1373 0x8fc0, 0x9058,
1374 0x9060, 0x9060,
1375 0x9068, 0x90f8,
1376 0x9400, 0x9408,
1377 0x9410, 0x9470,
1378 0x9600, 0x9600,
1379 0x9608, 0x9638,
1380 0x9640, 0x96f4,
1381 0x9800, 0x9808,
1382 0x9810, 0x9864,
1383 0x9c00, 0x9c6c,
1384 0x9c80, 0x9cec,
1385 0x9d00, 0x9d6c,
1386 0x9d80, 0x9dec,
1387 0x9e00, 0x9e6c,
1388 0x9e80, 0x9eec,
1389 0x9f00, 0x9f6c,
1390 0x9f80, 0xa020,
1391 0xd000, 0xd004,
1392 0xd010, 0xd03c,
1393 0xdfc0, 0xdfe0,
1394 0xe000, 0x1106c,
1395 0x11074, 0x11088,
1396 0x1109c, 0x1117c,
1397 0x11190, 0x11204,
1398 0x19040, 0x1906c,
1399 0x19078, 0x19080,
1400 0x1908c, 0x190e8,
1401 0x190f0, 0x190f8,
1402 0x19100, 0x19110,
1403 0x19120, 0x19124,
1404 0x19150, 0x19194,
1405 0x1919c, 0x191b0,
1406 0x191d0, 0x191e8,
1407 0x19238, 0x19290,
1408 0x193f8, 0x19428,
1409 0x19430, 0x19444,
1410 0x1944c, 0x1946c,
1411 0x19474, 0x19474,
1412 0x19490, 0x194cc,
1413 0x194f0, 0x194f8,
1414 0x19c00, 0x19c08,
1415 0x19c10, 0x19c60,
1416 0x19c94, 0x19ce4,
1417 0x19cf0, 0x19d40,
1418 0x19d50, 0x19d94,
1419 0x19da0, 0x19de8,
1420 0x19df0, 0x19e10,
1421 0x19e50, 0x19e90,
1422 0x19ea0, 0x19f24,
1423 0x19f34, 0x19f34,
1424 0x19f40, 0x19f50,
1425 0x19f90, 0x19fb4,
1426 0x19fc4, 0x19fe4,
1427 0x1a000, 0x1a004,
1428 0x1a010, 0x1a06c,
1429 0x1a0b0, 0x1a0e4,
1430 0x1a0ec, 0x1a0f8,
1431 0x1a100, 0x1a108,
1432 0x1a114, 0x1a130,
1433 0x1a138, 0x1a1c4,
1434 0x1a1fc, 0x1a1fc,
1435 0x1e008, 0x1e00c,
1436 0x1e040, 0x1e044,
1437 0x1e04c, 0x1e04c,
1438 0x1e284, 0x1e290,
1439 0x1e2c0, 0x1e2c0,
1440 0x1e2e0, 0x1e2e0,
1441 0x1e300, 0x1e384,
1442 0x1e3c0, 0x1e3c8,
1443 0x1e408, 0x1e40c,
1444 0x1e440, 0x1e444,
1445 0x1e44c, 0x1e44c,
1446 0x1e684, 0x1e690,
1447 0x1e6c0, 0x1e6c0,
1448 0x1e6e0, 0x1e6e0,
1449 0x1e700, 0x1e784,
1450 0x1e7c0, 0x1e7c8,
1451 0x1e808, 0x1e80c,
1452 0x1e840, 0x1e844,
1453 0x1e84c, 0x1e84c,
1454 0x1ea84, 0x1ea90,
1455 0x1eac0, 0x1eac0,
1456 0x1eae0, 0x1eae0,
1457 0x1eb00, 0x1eb84,
1458 0x1ebc0, 0x1ebc8,
1459 0x1ec08, 0x1ec0c,
1460 0x1ec40, 0x1ec44,
1461 0x1ec4c, 0x1ec4c,
1462 0x1ee84, 0x1ee90,
1463 0x1eec0, 0x1eec0,
1464 0x1eee0, 0x1eee0,
1465 0x1ef00, 0x1ef84,
1466 0x1efc0, 0x1efc8,
1467 0x1f008, 0x1f00c,
1468 0x1f040, 0x1f044,
1469 0x1f04c, 0x1f04c,
1470 0x1f284, 0x1f290,
1471 0x1f2c0, 0x1f2c0,
1472 0x1f2e0, 0x1f2e0,
1473 0x1f300, 0x1f384,
1474 0x1f3c0, 0x1f3c8,
1475 0x1f408, 0x1f40c,
1476 0x1f440, 0x1f444,
1477 0x1f44c, 0x1f44c,
1478 0x1f684, 0x1f690,
1479 0x1f6c0, 0x1f6c0,
1480 0x1f6e0, 0x1f6e0,
1481 0x1f700, 0x1f784,
1482 0x1f7c0, 0x1f7c8,
1483 0x1f808, 0x1f80c,
1484 0x1f840, 0x1f844,
1485 0x1f84c, 0x1f84c,
1486 0x1fa84, 0x1fa90,
1487 0x1fac0, 0x1fac0,
1488 0x1fae0, 0x1fae0,
1489 0x1fb00, 0x1fb84,
1490 0x1fbc0, 0x1fbc8,
1491 0x1fc08, 0x1fc0c,
1492 0x1fc40, 0x1fc44,
1493 0x1fc4c, 0x1fc4c,
1494 0x1fe84, 0x1fe90,
1495 0x1fec0, 0x1fec0,
1496 0x1fee0, 0x1fee0,
1497 0x1ff00, 0x1ff84,
1498 0x1ffc0, 0x1ffc8,
1499 0x30000, 0x30030,
1500 0x30100, 0x30144,
1501 0x30190, 0x301a0,
1502 0x301a8, 0x301b8,
1503 0x301c4, 0x301c8,
1504 0x301d0, 0x301d0,
1505 0x30200, 0x30318,
1506 0x30400, 0x304b4,
1507 0x304c0, 0x3052c,
1508 0x30540, 0x3061c,
1509 0x30800, 0x30828,
1510 0x30834, 0x30834,
1511 0x308c0, 0x30908,
1512 0x30910, 0x309ac,
1513 0x30a00, 0x30a14,
1514 0x30a1c, 0x30a2c,
1515 0x30a44, 0x30a50,
1516 0x30a74, 0x30a74,
1517 0x30a7c, 0x30afc,
1518 0x30b08, 0x30c24,
1519 0x30d00, 0x30d00,
1520 0x30d08, 0x30d14,
1521 0x30d1c, 0x30d20,
1522 0x30d3c, 0x30d3c,
1523 0x30d48, 0x30d50,
1524 0x31200, 0x3120c,
1525 0x31220, 0x31220,
1526 0x31240, 0x31240,
1527 0x31600, 0x3160c,
1528 0x31a00, 0x31a1c,
1529 0x31e00, 0x31e20,
1530 0x31e38, 0x31e3c,
1531 0x31e80, 0x31e80,
1532 0x31e88, 0x31ea8,
1533 0x31eb0, 0x31eb4,
1534 0x31ec8, 0x31ed4,
1535 0x31fb8, 0x32004,
1536 0x32200, 0x32200,
1537 0x32208, 0x32240,
1538 0x32248, 0x32280,
1539 0x32288, 0x322c0,
1540 0x322c8, 0x322fc,
1541 0x32600, 0x32630,
1542 0x32a00, 0x32abc,
1543 0x32b00, 0x32b10,
1544 0x32b20, 0x32b30,
1545 0x32b40, 0x32b50,
1546 0x32b60, 0x32b70,
1547 0x33000, 0x33028,
1548 0x33030, 0x33048,
1549 0x33060, 0x33068,
1550 0x33070, 0x3309c,
1551 0x330f0, 0x33128,
1552 0x33130, 0x33148,
1553 0x33160, 0x33168,
1554 0x33170, 0x3319c,
1555 0x331f0, 0x33238,
1556 0x33240, 0x33240,
1557 0x33248, 0x33250,
1558 0x3325c, 0x33264,
1559 0x33270, 0x332b8,
1560 0x332c0, 0x332e4,
1561 0x332f8, 0x33338,
1562 0x33340, 0x33340,
1563 0x33348, 0x33350,
1564 0x3335c, 0x33364,
1565 0x33370, 0x333b8,
1566 0x333c0, 0x333e4,
1567 0x333f8, 0x33428,
1568 0x33430, 0x33448,
1569 0x33460, 0x33468,
1570 0x33470, 0x3349c,
1571 0x334f0, 0x33528,
1572 0x33530, 0x33548,
1573 0x33560, 0x33568,
1574 0x33570, 0x3359c,
1575 0x335f0, 0x33638,
1576 0x33640, 0x33640,
1577 0x33648, 0x33650,
1578 0x3365c, 0x33664,
1579 0x33670, 0x336b8,
1580 0x336c0, 0x336e4,
1581 0x336f8, 0x33738,
1582 0x33740, 0x33740,
1583 0x33748, 0x33750,
1584 0x3375c, 0x33764,
1585 0x33770, 0x337b8,
1586 0x337c0, 0x337e4,
1587 0x337f8, 0x337fc,
1588 0x33814, 0x33814,
1589 0x3382c, 0x3382c,
1590 0x33880, 0x3388c,
1591 0x338e8, 0x338ec,
1592 0x33900, 0x33928,
1593 0x33930, 0x33948,
1594 0x33960, 0x33968,
1595 0x33970, 0x3399c,
1596 0x339f0, 0x33a38,
1597 0x33a40, 0x33a40,
1598 0x33a48, 0x33a50,
1599 0x33a5c, 0x33a64,
1600 0x33a70, 0x33ab8,
1601 0x33ac0, 0x33ae4,
1602 0x33af8, 0x33b10,
1603 0x33b28, 0x33b28,
1604 0x33b3c, 0x33b50,
1605 0x33bf0, 0x33c10,
1606 0x33c28, 0x33c28,
1607 0x33c3c, 0x33c50,
1608 0x33cf0, 0x33cfc,
1609 0x34000, 0x34030,
1610 0x34100, 0x34144,
1611 0x34190, 0x341a0,
1612 0x341a8, 0x341b8,
1613 0x341c4, 0x341c8,
1614 0x341d0, 0x341d0,
1615 0x34200, 0x34318,
1616 0x34400, 0x344b4,
1617 0x344c0, 0x3452c,
1618 0x34540, 0x3461c,
1619 0x34800, 0x34828,
1620 0x34834, 0x34834,
1621 0x348c0, 0x34908,
1622 0x34910, 0x349ac,
1623 0x34a00, 0x34a14,
1624 0x34a1c, 0x34a2c,
1625 0x34a44, 0x34a50,
1626 0x34a74, 0x34a74,
1627 0x34a7c, 0x34afc,
1628 0x34b08, 0x34c24,
1629 0x34d00, 0x34d00,
1630 0x34d08, 0x34d14,
1631 0x34d1c, 0x34d20,
1632 0x34d3c, 0x34d3c,
1633 0x34d48, 0x34d50,
1634 0x35200, 0x3520c,
1635 0x35220, 0x35220,
1636 0x35240, 0x35240,
1637 0x35600, 0x3560c,
1638 0x35a00, 0x35a1c,
1639 0x35e00, 0x35e20,
1640 0x35e38, 0x35e3c,
1641 0x35e80, 0x35e80,
1642 0x35e88, 0x35ea8,
1643 0x35eb0, 0x35eb4,
1644 0x35ec8, 0x35ed4,
1645 0x35fb8, 0x36004,
1646 0x36200, 0x36200,
1647 0x36208, 0x36240,
1648 0x36248, 0x36280,
1649 0x36288, 0x362c0,
1650 0x362c8, 0x362fc,
1651 0x36600, 0x36630,
1652 0x36a00, 0x36abc,
1653 0x36b00, 0x36b10,
1654 0x36b20, 0x36b30,
1655 0x36b40, 0x36b50,
1656 0x36b60, 0x36b70,
1657 0x37000, 0x37028,
1658 0x37030, 0x37048,
1659 0x37060, 0x37068,
1660 0x37070, 0x3709c,
1661 0x370f0, 0x37128,
1662 0x37130, 0x37148,
1663 0x37160, 0x37168,
1664 0x37170, 0x3719c,
1665 0x371f0, 0x37238,
1666 0x37240, 0x37240,
1667 0x37248, 0x37250,
1668 0x3725c, 0x37264,
1669 0x37270, 0x372b8,
1670 0x372c0, 0x372e4,
1671 0x372f8, 0x37338,
1672 0x37340, 0x37340,
1673 0x37348, 0x37350,
1674 0x3735c, 0x37364,
1675 0x37370, 0x373b8,
1676 0x373c0, 0x373e4,
1677 0x373f8, 0x37428,
1678 0x37430, 0x37448,
1679 0x37460, 0x37468,
1680 0x37470, 0x3749c,
1681 0x374f0, 0x37528,
1682 0x37530, 0x37548,
1683 0x37560, 0x37568,
1684 0x37570, 0x3759c,
1685 0x375f0, 0x37638,
1686 0x37640, 0x37640,
1687 0x37648, 0x37650,
1688 0x3765c, 0x37664,
1689 0x37670, 0x376b8,
1690 0x376c0, 0x376e4,
1691 0x376f8, 0x37738,
1692 0x37740, 0x37740,
1693 0x37748, 0x37750,
1694 0x3775c, 0x37764,
1695 0x37770, 0x377b8,
1696 0x377c0, 0x377e4,
1697 0x377f8, 0x377fc,
1698 0x37814, 0x37814,
1699 0x3782c, 0x3782c,
1700 0x37880, 0x3788c,
1701 0x378e8, 0x378ec,
1702 0x37900, 0x37928,
1703 0x37930, 0x37948,
1704 0x37960, 0x37968,
1705 0x37970, 0x3799c,
1706 0x379f0, 0x37a38,
1707 0x37a40, 0x37a40,
1708 0x37a48, 0x37a50,
1709 0x37a5c, 0x37a64,
1710 0x37a70, 0x37ab8,
1711 0x37ac0, 0x37ae4,
1712 0x37af8, 0x37b10,
1713 0x37b28, 0x37b28,
1714 0x37b3c, 0x37b50,
1715 0x37bf0, 0x37c10,
1716 0x37c28, 0x37c28,
1717 0x37c3c, 0x37c50,
1718 0x37cf0, 0x37cfc,
1719 0x38000, 0x38030,
1720 0x38100, 0x38144,
1721 0x38190, 0x381a0,
1722 0x381a8, 0x381b8,
1723 0x381c4, 0x381c8,
1724 0x381d0, 0x381d0,
1725 0x38200, 0x38318,
1726 0x38400, 0x384b4,
1727 0x384c0, 0x3852c,
1728 0x38540, 0x3861c,
1729 0x38800, 0x38828,
1730 0x38834, 0x38834,
1731 0x388c0, 0x38908,
1732 0x38910, 0x389ac,
1733 0x38a00, 0x38a14,
1734 0x38a1c, 0x38a2c,
1735 0x38a44, 0x38a50,
1736 0x38a74, 0x38a74,
1737 0x38a7c, 0x38afc,
1738 0x38b08, 0x38c24,
1739 0x38d00, 0x38d00,
1740 0x38d08, 0x38d14,
1741 0x38d1c, 0x38d20,
1742 0x38d3c, 0x38d3c,
1743 0x38d48, 0x38d50,
1744 0x39200, 0x3920c,
1745 0x39220, 0x39220,
1746 0x39240, 0x39240,
1747 0x39600, 0x3960c,
1748 0x39a00, 0x39a1c,
1749 0x39e00, 0x39e20,
1750 0x39e38, 0x39e3c,
1751 0x39e80, 0x39e80,
1752 0x39e88, 0x39ea8,
1753 0x39eb0, 0x39eb4,
1754 0x39ec8, 0x39ed4,
1755 0x39fb8, 0x3a004,
1756 0x3a200, 0x3a200,
1757 0x3a208, 0x3a240,
1758 0x3a248, 0x3a280,
1759 0x3a288, 0x3a2c0,
1760 0x3a2c8, 0x3a2fc,
1761 0x3a600, 0x3a630,
1762 0x3aa00, 0x3aabc,
1763 0x3ab00, 0x3ab10,
1764 0x3ab20, 0x3ab30,
1765 0x3ab40, 0x3ab50,
1766 0x3ab60, 0x3ab70,
1767 0x3b000, 0x3b028,
1768 0x3b030, 0x3b048,
1769 0x3b060, 0x3b068,
1770 0x3b070, 0x3b09c,
1771 0x3b0f0, 0x3b128,
1772 0x3b130, 0x3b148,
1773 0x3b160, 0x3b168,
1774 0x3b170, 0x3b19c,
1775 0x3b1f0, 0x3b238,
1776 0x3b240, 0x3b240,
1777 0x3b248, 0x3b250,
1778 0x3b25c, 0x3b264,
1779 0x3b270, 0x3b2b8,
1780 0x3b2c0, 0x3b2e4,
1781 0x3b2f8, 0x3b338,
1782 0x3b340, 0x3b340,
1783 0x3b348, 0x3b350,
1784 0x3b35c, 0x3b364,
1785 0x3b370, 0x3b3b8,
1786 0x3b3c0, 0x3b3e4,
1787 0x3b3f8, 0x3b428,
1788 0x3b430, 0x3b448,
1789 0x3b460, 0x3b468,
1790 0x3b470, 0x3b49c,
1791 0x3b4f0, 0x3b528,
1792 0x3b530, 0x3b548,
1793 0x3b560, 0x3b568,
1794 0x3b570, 0x3b59c,
1795 0x3b5f0, 0x3b638,
1796 0x3b640, 0x3b640,
1797 0x3b648, 0x3b650,
1798 0x3b65c, 0x3b664,
1799 0x3b670, 0x3b6b8,
1800 0x3b6c0, 0x3b6e4,
1801 0x3b6f8, 0x3b738,
1802 0x3b740, 0x3b740,
1803 0x3b748, 0x3b750,
1804 0x3b75c, 0x3b764,
1805 0x3b770, 0x3b7b8,
1806 0x3b7c0, 0x3b7e4,
1807 0x3b7f8, 0x3b7fc,
1808 0x3b814, 0x3b814,
1809 0x3b82c, 0x3b82c,
1810 0x3b880, 0x3b88c,
1811 0x3b8e8, 0x3b8ec,
1812 0x3b900, 0x3b928,
1813 0x3b930, 0x3b948,
1814 0x3b960, 0x3b968,
1815 0x3b970, 0x3b99c,
1816 0x3b9f0, 0x3ba38,
1817 0x3ba40, 0x3ba40,
1818 0x3ba48, 0x3ba50,
1819 0x3ba5c, 0x3ba64,
1820 0x3ba70, 0x3bab8,
1821 0x3bac0, 0x3bae4,
1822 0x3baf8, 0x3bb10,
1823 0x3bb28, 0x3bb28,
1824 0x3bb3c, 0x3bb50,
1825 0x3bbf0, 0x3bc10,
1826 0x3bc28, 0x3bc28,
1827 0x3bc3c, 0x3bc50,
1828 0x3bcf0, 0x3bcfc,
1829 0x3c000, 0x3c030,
1830 0x3c100, 0x3c144,
1831 0x3c190, 0x3c1a0,
1832 0x3c1a8, 0x3c1b8,
1833 0x3c1c4, 0x3c1c8,
1834 0x3c1d0, 0x3c1d0,
1835 0x3c200, 0x3c318,
1836 0x3c400, 0x3c4b4,
1837 0x3c4c0, 0x3c52c,
1838 0x3c540, 0x3c61c,
1839 0x3c800, 0x3c828,
1840 0x3c834, 0x3c834,
1841 0x3c8c0, 0x3c908,
1842 0x3c910, 0x3c9ac,
1843 0x3ca00, 0x3ca14,
1844 0x3ca1c, 0x3ca2c,
1845 0x3ca44, 0x3ca50,
1846 0x3ca74, 0x3ca74,
1847 0x3ca7c, 0x3cafc,
1848 0x3cb08, 0x3cc24,
1849 0x3cd00, 0x3cd00,
1850 0x3cd08, 0x3cd14,
1851 0x3cd1c, 0x3cd20,
1852 0x3cd3c, 0x3cd3c,
1853 0x3cd48, 0x3cd50,
1854 0x3d200, 0x3d20c,
1855 0x3d220, 0x3d220,
1856 0x3d240, 0x3d240,
1857 0x3d600, 0x3d60c,
1858 0x3da00, 0x3da1c,
1859 0x3de00, 0x3de20,
1860 0x3de38, 0x3de3c,
1861 0x3de80, 0x3de80,
1862 0x3de88, 0x3dea8,
1863 0x3deb0, 0x3deb4,
1864 0x3dec8, 0x3ded4,
1865 0x3dfb8, 0x3e004,
1866 0x3e200, 0x3e200,
1867 0x3e208, 0x3e240,
1868 0x3e248, 0x3e280,
1869 0x3e288, 0x3e2c0,
1870 0x3e2c8, 0x3e2fc,
1871 0x3e600, 0x3e630,
1872 0x3ea00, 0x3eabc,
1873 0x3eb00, 0x3eb10,
1874 0x3eb20, 0x3eb30,
1875 0x3eb40, 0x3eb50,
1876 0x3eb60, 0x3eb70,
1877 0x3f000, 0x3f028,
1878 0x3f030, 0x3f048,
1879 0x3f060, 0x3f068,
1880 0x3f070, 0x3f09c,
1881 0x3f0f0, 0x3f128,
1882 0x3f130, 0x3f148,
1883 0x3f160, 0x3f168,
1884 0x3f170, 0x3f19c,
1885 0x3f1f0, 0x3f238,
1886 0x3f240, 0x3f240,
1887 0x3f248, 0x3f250,
1888 0x3f25c, 0x3f264,
1889 0x3f270, 0x3f2b8,
1890 0x3f2c0, 0x3f2e4,
1891 0x3f2f8, 0x3f338,
1892 0x3f340, 0x3f340,
1893 0x3f348, 0x3f350,
1894 0x3f35c, 0x3f364,
1895 0x3f370, 0x3f3b8,
1896 0x3f3c0, 0x3f3e4,
1897 0x3f3f8, 0x3f428,
1898 0x3f430, 0x3f448,
1899 0x3f460, 0x3f468,
1900 0x3f470, 0x3f49c,
1901 0x3f4f0, 0x3f528,
1902 0x3f530, 0x3f548,
1903 0x3f560, 0x3f568,
1904 0x3f570, 0x3f59c,
1905 0x3f5f0, 0x3f638,
1906 0x3f640, 0x3f640,
1907 0x3f648, 0x3f650,
1908 0x3f65c, 0x3f664,
1909 0x3f670, 0x3f6b8,
1910 0x3f6c0, 0x3f6e4,
1911 0x3f6f8, 0x3f738,
1912 0x3f740, 0x3f740,
1913 0x3f748, 0x3f750,
1914 0x3f75c, 0x3f764,
1915 0x3f770, 0x3f7b8,
1916 0x3f7c0, 0x3f7e4,
1917 0x3f7f8, 0x3f7fc,
1918 0x3f814, 0x3f814,
1919 0x3f82c, 0x3f82c,
1920 0x3f880, 0x3f88c,
1921 0x3f8e8, 0x3f8ec,
1922 0x3f900, 0x3f928,
1923 0x3f930, 0x3f948,
1924 0x3f960, 0x3f968,
1925 0x3f970, 0x3f99c,
1926 0x3f9f0, 0x3fa38,
1927 0x3fa40, 0x3fa40,
1928 0x3fa48, 0x3fa50,
1929 0x3fa5c, 0x3fa64,
1930 0x3fa70, 0x3fab8,
1931 0x3fac0, 0x3fae4,
1932 0x3faf8, 0x3fb10,
1933 0x3fb28, 0x3fb28,
1934 0x3fb3c, 0x3fb50,
1935 0x3fbf0, 0x3fc10,
1936 0x3fc28, 0x3fc28,
1937 0x3fc3c, 0x3fc50,
1938 0x3fcf0, 0x3fcfc,
1939 0x40000, 0x4000c,
1940 0x40040, 0x40050,
1941 0x40060, 0x40068,
1942 0x4007c, 0x4008c,
1943 0x40094, 0x400b0,
1944 0x400c0, 0x40144,
1945 0x40180, 0x4018c,
1946 0x40200, 0x40254,
1947 0x40260, 0x40264,
1948 0x40270, 0x40288,
1949 0x40290, 0x40298,
1950 0x402ac, 0x402c8,
1951 0x402d0, 0x402e0,
1952 0x402f0, 0x402f0,
1953 0x40300, 0x4033c,
1954 0x403f8, 0x403fc,
1955 0x41304, 0x413c4,
1956 0x41400, 0x4140c,
1957 0x41414, 0x4141c,
1958 0x41480, 0x414d0,
1959 0x44000, 0x44054,
1960 0x4405c, 0x44078,
1961 0x440c0, 0x44174,
1962 0x44180, 0x441ac,
1963 0x441b4, 0x441b8,
1964 0x441c0, 0x44254,
1965 0x4425c, 0x44278,
1966 0x442c0, 0x44374,
1967 0x44380, 0x443ac,
1968 0x443b4, 0x443b8,
1969 0x443c0, 0x44454,
1970 0x4445c, 0x44478,
1971 0x444c0, 0x44574,
1972 0x44580, 0x445ac,
1973 0x445b4, 0x445b8,
1974 0x445c0, 0x44654,
1975 0x4465c, 0x44678,
1976 0x446c0, 0x44774,
1977 0x44780, 0x447ac,
1978 0x447b4, 0x447b8,
1979 0x447c0, 0x44854,
1980 0x4485c, 0x44878,
1981 0x448c0, 0x44974,
1982 0x44980, 0x449ac,
1983 0x449b4, 0x449b8,
1984 0x449c0, 0x449fc,
1985 0x45000, 0x45004,
1986 0x45010, 0x45030,
1987 0x45040, 0x45060,
1988 0x45068, 0x45068,
1989 0x45080, 0x45084,
1990 0x450a0, 0x450b0,
1991 0x45200, 0x45204,
1992 0x45210, 0x45230,
1993 0x45240, 0x45260,
1994 0x45268, 0x45268,
1995 0x45280, 0x45284,
1996 0x452a0, 0x452b0,
1997 0x460c0, 0x460e4,
1998 0x47000, 0x4703c,
1999 0x47044, 0x4708c,
2000 0x47200, 0x47250,
2001 0x47400, 0x47408,
2002 0x47414, 0x47420,
2003 0x47600, 0x47618,
2004 0x47800, 0x47814,
2005 0x48000, 0x4800c,
2006 0x48040, 0x48050,
2007 0x48060, 0x48068,
2008 0x4807c, 0x4808c,
2009 0x48094, 0x480b0,
2010 0x480c0, 0x48144,
2011 0x48180, 0x4818c,
2012 0x48200, 0x48254,
2013 0x48260, 0x48264,
2014 0x48270, 0x48288,
2015 0x48290, 0x48298,
2016 0x482ac, 0x482c8,
2017 0x482d0, 0x482e0,
2018 0x482f0, 0x482f0,
2019 0x48300, 0x4833c,
2020 0x483f8, 0x483fc,
2021 0x49304, 0x493c4,
2022 0x49400, 0x4940c,
2023 0x49414, 0x4941c,
2024 0x49480, 0x494d0,
2025 0x4c000, 0x4c054,
2026 0x4c05c, 0x4c078,
2027 0x4c0c0, 0x4c174,
2028 0x4c180, 0x4c1ac,
2029 0x4c1b4, 0x4c1b8,
2030 0x4c1c0, 0x4c254,
2031 0x4c25c, 0x4c278,
2032 0x4c2c0, 0x4c374,
2033 0x4c380, 0x4c3ac,
2034 0x4c3b4, 0x4c3b8,
2035 0x4c3c0, 0x4c454,
2036 0x4c45c, 0x4c478,
2037 0x4c4c0, 0x4c574,
2038 0x4c580, 0x4c5ac,
2039 0x4c5b4, 0x4c5b8,
2040 0x4c5c0, 0x4c654,
2041 0x4c65c, 0x4c678,
2042 0x4c6c0, 0x4c774,
2043 0x4c780, 0x4c7ac,
2044 0x4c7b4, 0x4c7b8,
2045 0x4c7c0, 0x4c854,
2046 0x4c85c, 0x4c878,
2047 0x4c8c0, 0x4c974,
2048 0x4c980, 0x4c9ac,
2049 0x4c9b4, 0x4c9b8,
2050 0x4c9c0, 0x4c9fc,
2051 0x4d000, 0x4d004,
2052 0x4d010, 0x4d030,
2053 0x4d040, 0x4d060,
2054 0x4d068, 0x4d068,
2055 0x4d080, 0x4d084,
2056 0x4d0a0, 0x4d0b0,
2057 0x4d200, 0x4d204,
2058 0x4d210, 0x4d230,
2059 0x4d240, 0x4d260,
2060 0x4d268, 0x4d268,
2061 0x4d280, 0x4d284,
2062 0x4d2a0, 0x4d2b0,
2063 0x4e0c0, 0x4e0e4,
2064 0x4f000, 0x4f03c,
2065 0x4f044, 0x4f08c,
2066 0x4f200, 0x4f250,
2067 0x4f400, 0x4f408,
2068 0x4f414, 0x4f420,
2069 0x4f600, 0x4f618,
2070 0x4f800, 0x4f814,
2071 0x50000, 0x50084,
2072 0x50090, 0x500cc,
2073 0x50400, 0x50400,
2074 0x50800, 0x50884,
2075 0x50890, 0x508cc,
2076 0x50c00, 0x50c00,
2077 0x51000, 0x5101c,
2078 0x51300, 0x51308,
2079 };
2080
2081 static const unsigned int t6_reg_ranges[] = {
2082 0x1008, 0x101c,
2083 0x1024, 0x10a8,
2084 0x10b4, 0x10f8,
2085 0x1100, 0x1114,
2086 0x111c, 0x112c,
2087 0x1138, 0x113c,
2088 0x1144, 0x114c,
2089 0x1180, 0x1184,
2090 0x1190, 0x1194,
2091 0x11a0, 0x11a4,
2092 0x11b0, 0x11b4,
2093 0x11fc, 0x123c,
2094 0x1254, 0x1274,
2095 0x1280, 0x133c,
2096 0x1800, 0x18fc,
2097 0x3000, 0x302c,
2098 0x3060, 0x30b0,
2099 0x30b8, 0x30d8,
2100 0x30e0, 0x30fc,
2101 0x3140, 0x357c,
2102 0x35a8, 0x35cc,
2103 0x35ec, 0x35ec,
2104 0x3600, 0x5624,
2105 0x56cc, 0x56ec,
2106 0x56f4, 0x5720,
2107 0x5728, 0x575c,
2108 0x580c, 0x5814,
2109 0x5890, 0x589c,
2110 0x58a4, 0x58ac,
2111 0x58b8, 0x58bc,
2112 0x5940, 0x595c,
2113 0x5980, 0x598c,
2114 0x59b0, 0x59c8,
2115 0x59d0, 0x59dc,
2116 0x59fc, 0x5a18,
2117 0x5a60, 0x5a6c,
2118 0x5a80, 0x5a8c,
2119 0x5a94, 0x5a9c,
2120 0x5b94, 0x5bfc,
2121 0x5c10, 0x5e48,
2122 0x5e50, 0x5e94,
2123 0x5ea0, 0x5eb0,
2124 0x5ec0, 0x5ec0,
2125 0x5ec8, 0x5ed0,
2126 0x5ee0, 0x5ee0,
2127 0x5ef0, 0x5ef0,
2128 0x5f00, 0x5f00,
2129 0x6000, 0x6020,
2130 0x6028, 0x6040,
2131 0x6058, 0x609c,
2132 0x60a8, 0x619c,
2133 0x7700, 0x7798,
2134 0x77c0, 0x7880,
2135 0x78cc, 0x78fc,
2136 0x7b00, 0x7b58,
2137 0x7b60, 0x7b84,
2138 0x7b8c, 0x7c54,
2139 0x7d00, 0x7d38,
2140 0x7d40, 0x7d84,
2141 0x7d8c, 0x7ddc,
2142 0x7de4, 0x7e04,
2143 0x7e10, 0x7e1c,
2144 0x7e24, 0x7e38,
2145 0x7e40, 0x7e44,
2146 0x7e4c, 0x7e78,
2147 0x7e80, 0x7edc,
2148 0x7ee8, 0x7efc,
2149 0x8dc0, 0x8de4,
2150 0x8df8, 0x8e04,
2151 0x8e10, 0x8e84,
2152 0x8ea0, 0x8f88,
2153 0x8fb8, 0x9058,
2154 0x9060, 0x9060,
2155 0x9068, 0x90f8,
2156 0x9100, 0x9124,
2157 0x9400, 0x9470,
2158 0x9600, 0x9600,
2159 0x9608, 0x9638,
2160 0x9640, 0x9704,
2161 0x9710, 0x971c,
2162 0x9800, 0x9808,
2163 0x9810, 0x9864,
2164 0x9c00, 0x9c6c,
2165 0x9c80, 0x9cec,
2166 0x9d00, 0x9d6c,
2167 0x9d80, 0x9dec,
2168 0x9e00, 0x9e6c,
2169 0x9e80, 0x9eec,
2170 0x9f00, 0x9f6c,
2171 0x9f80, 0xa020,
2172 0xd000, 0xd03c,
2173 0xd100, 0xd118,
2174 0xd200, 0xd214,
2175 0xd220, 0xd234,
2176 0xd240, 0xd254,
2177 0xd260, 0xd274,
2178 0xd280, 0xd294,
2179 0xd2a0, 0xd2b4,
2180 0xd2c0, 0xd2d4,
2181 0xd2e0, 0xd2f4,
2182 0xd300, 0xd31c,
2183 0xdfc0, 0xdfe0,
2184 0xe000, 0xf008,
2185 0xf010, 0xf018,
2186 0xf020, 0xf028,
2187 0x11000, 0x11014,
2188 0x11048, 0x1106c,
2189 0x11074, 0x11088,
2190 0x11098, 0x11120,
2191 0x1112c, 0x1117c,
2192 0x11190, 0x112e0,
2193 0x11300, 0x1130c,
2194 0x12000, 0x1206c,
2195 0x19040, 0x1906c,
2196 0x19078, 0x19080,
2197 0x1908c, 0x190e8,
2198 0x190f0, 0x190f8,
2199 0x19100, 0x19110,
2200 0x19120, 0x19124,
2201 0x19150, 0x19194,
2202 0x1919c, 0x191b0,
2203 0x191d0, 0x191e8,
2204 0x19238, 0x19290,
2205 0x192a4, 0x192b0,
2206 0x192bc, 0x192bc,
2207 0x19348, 0x1934c,
2208 0x193f8, 0x19418,
2209 0x19420, 0x19428,
2210 0x19430, 0x19444,
2211 0x1944c, 0x1946c,
2212 0x19474, 0x19474,
2213 0x19490, 0x194cc,
2214 0x194f0, 0x194f8,
2215 0x19c00, 0x19c48,
2216 0x19c50, 0x19c80,
2217 0x19c94, 0x19c98,
2218 0x19ca0, 0x19cbc,
2219 0x19ce4, 0x19ce4,
2220 0x19cf0, 0x19cf8,
2221 0x19d00, 0x19d28,
2222 0x19d50, 0x19d78,
2223 0x19d94, 0x19d98,
2224 0x19da0, 0x19dc8,
2225 0x19df0, 0x19e10,
2226 0x19e50, 0x19e6c,
2227 0x19ea0, 0x19ebc,
2228 0x19ec4, 0x19ef4,
2229 0x19f04, 0x19f2c,
2230 0x19f34, 0x19f34,
2231 0x19f40, 0x19f50,
2232 0x19f90, 0x19fac,
2233 0x19fc4, 0x19fc8,
2234 0x19fd0, 0x19fe4,
2235 0x1a000, 0x1a004,
2236 0x1a010, 0x1a06c,
2237 0x1a0b0, 0x1a0e4,
2238 0x1a0ec, 0x1a0f8,
2239 0x1a100, 0x1a108,
2240 0x1a114, 0x1a130,
2241 0x1a138, 0x1a1c4,
2242 0x1a1fc, 0x1a1fc,
2243 0x1e008, 0x1e00c,
2244 0x1e040, 0x1e044,
2245 0x1e04c, 0x1e04c,
2246 0x1e284, 0x1e290,
2247 0x1e2c0, 0x1e2c0,
2248 0x1e2e0, 0x1e2e0,
2249 0x1e300, 0x1e384,
2250 0x1e3c0, 0x1e3c8,
2251 0x1e408, 0x1e40c,
2252 0x1e440, 0x1e444,
2253 0x1e44c, 0x1e44c,
2254 0x1e684, 0x1e690,
2255 0x1e6c0, 0x1e6c0,
2256 0x1e6e0, 0x1e6e0,
2257 0x1e700, 0x1e784,
2258 0x1e7c0, 0x1e7c8,
2259 0x1e808, 0x1e80c,
2260 0x1e840, 0x1e844,
2261 0x1e84c, 0x1e84c,
2262 0x1ea84, 0x1ea90,
2263 0x1eac0, 0x1eac0,
2264 0x1eae0, 0x1eae0,
2265 0x1eb00, 0x1eb84,
2266 0x1ebc0, 0x1ebc8,
2267 0x1ec08, 0x1ec0c,
2268 0x1ec40, 0x1ec44,
2269 0x1ec4c, 0x1ec4c,
2270 0x1ee84, 0x1ee90,
2271 0x1eec0, 0x1eec0,
2272 0x1eee0, 0x1eee0,
2273 0x1ef00, 0x1ef84,
2274 0x1efc0, 0x1efc8,
2275 0x1f008, 0x1f00c,
2276 0x1f040, 0x1f044,
2277 0x1f04c, 0x1f04c,
2278 0x1f284, 0x1f290,
2279 0x1f2c0, 0x1f2c0,
2280 0x1f2e0, 0x1f2e0,
2281 0x1f300, 0x1f384,
2282 0x1f3c0, 0x1f3c8,
2283 0x1f408, 0x1f40c,
2284 0x1f440, 0x1f444,
2285 0x1f44c, 0x1f44c,
2286 0x1f684, 0x1f690,
2287 0x1f6c0, 0x1f6c0,
2288 0x1f6e0, 0x1f6e0,
2289 0x1f700, 0x1f784,
2290 0x1f7c0, 0x1f7c8,
2291 0x1f808, 0x1f80c,
2292 0x1f840, 0x1f844,
2293 0x1f84c, 0x1f84c,
2294 0x1fa84, 0x1fa90,
2295 0x1fac0, 0x1fac0,
2296 0x1fae0, 0x1fae0,
2297 0x1fb00, 0x1fb84,
2298 0x1fbc0, 0x1fbc8,
2299 0x1fc08, 0x1fc0c,
2300 0x1fc40, 0x1fc44,
2301 0x1fc4c, 0x1fc4c,
2302 0x1fe84, 0x1fe90,
2303 0x1fec0, 0x1fec0,
2304 0x1fee0, 0x1fee0,
2305 0x1ff00, 0x1ff84,
2306 0x1ffc0, 0x1ffc8,
2307 0x30000, 0x30030,
2308 0x30100, 0x30168,
2309 0x30190, 0x301a0,
2310 0x301a8, 0x301b8,
2311 0x301c4, 0x301c8,
2312 0x301d0, 0x301d0,
2313 0x30200, 0x30320,
2314 0x30400, 0x304b4,
2315 0x304c0, 0x3052c,
2316 0x30540, 0x3061c,
2317 0x30800, 0x308a0,
2318 0x308c0, 0x30908,
2319 0x30910, 0x309b8,
2320 0x30a00, 0x30a04,
2321 0x30a0c, 0x30a14,
2322 0x30a1c, 0x30a2c,
2323 0x30a44, 0x30a50,
2324 0x30a74, 0x30a74,
2325 0x30a7c, 0x30afc,
2326 0x30b08, 0x30c24,
2327 0x30d00, 0x30d14,
2328 0x30d1c, 0x30d3c,
2329 0x30d44, 0x30d4c,
2330 0x30d54, 0x30d74,
2331 0x30d7c, 0x30d7c,
2332 0x30de0, 0x30de0,
2333 0x30e00, 0x30ed4,
2334 0x30f00, 0x30fa4,
2335 0x30fc0, 0x30fc4,
2336 0x31000, 0x31004,
2337 0x31080, 0x310fc,
2338 0x31208, 0x31220,
2339 0x3123c, 0x31254,
2340 0x31300, 0x31300,
2341 0x31308, 0x3131c,
2342 0x31338, 0x3133c,
2343 0x31380, 0x31380,
2344 0x31388, 0x313a8,
2345 0x313b4, 0x313b4,
2346 0x31400, 0x31420,
2347 0x31438, 0x3143c,
2348 0x31480, 0x31480,
2349 0x314a8, 0x314a8,
2350 0x314b0, 0x314b4,
2351 0x314c8, 0x314d4,
2352 0x31a40, 0x31a4c,
2353 0x31af0, 0x31b20,
2354 0x31b38, 0x31b3c,
2355 0x31b80, 0x31b80,
2356 0x31ba8, 0x31ba8,
2357 0x31bb0, 0x31bb4,
2358 0x31bc8, 0x31bd4,
2359 0x32140, 0x3218c,
2360 0x321f0, 0x321f4,
2361 0x32200, 0x32200,
2362 0x32218, 0x32218,
2363 0x32400, 0x32400,
2364 0x32408, 0x3241c,
2365 0x32618, 0x32620,
2366 0x32664, 0x32664,
2367 0x326a8, 0x326a8,
2368 0x326ec, 0x326ec,
2369 0x32a00, 0x32abc,
2370 0x32b00, 0x32b18,
2371 0x32b20, 0x32b38,
2372 0x32b40, 0x32b58,
2373 0x32b60, 0x32b78,
2374 0x32c00, 0x32c00,
2375 0x32c08, 0x32c3c,
2376 0x33000, 0x3302c,
2377 0x33034, 0x33050,
2378 0x33058, 0x33058,
2379 0x33060, 0x3308c,
2380 0x3309c, 0x330ac,
2381 0x330c0, 0x330c0,
2382 0x330c8, 0x330d0,
2383 0x330d8, 0x330e0,
2384 0x330ec, 0x3312c,
2385 0x33134, 0x33150,
2386 0x33158, 0x33158,
2387 0x33160, 0x3318c,
2388 0x3319c, 0x331ac,
2389 0x331c0, 0x331c0,
2390 0x331c8, 0x331d0,
2391 0x331d8, 0x331e0,
2392 0x331ec, 0x33290,
2393 0x33298, 0x332c4,
2394 0x332e4, 0x33390,
2395 0x33398, 0x333c4,
2396 0x333e4, 0x3342c,
2397 0x33434, 0x33450,
2398 0x33458, 0x33458,
2399 0x33460, 0x3348c,
2400 0x3349c, 0x334ac,
2401 0x334c0, 0x334c0,
2402 0x334c8, 0x334d0,
2403 0x334d8, 0x334e0,
2404 0x334ec, 0x3352c,
2405 0x33534, 0x33550,
2406 0x33558, 0x33558,
2407 0x33560, 0x3358c,
2408 0x3359c, 0x335ac,
2409 0x335c0, 0x335c0,
2410 0x335c8, 0x335d0,
2411 0x335d8, 0x335e0,
2412 0x335ec, 0x33690,
2413 0x33698, 0x336c4,
2414 0x336e4, 0x33790,
2415 0x33798, 0x337c4,
2416 0x337e4, 0x337fc,
2417 0x33814, 0x33814,
2418 0x33854, 0x33868,
2419 0x33880, 0x3388c,
2420 0x338c0, 0x338d0,
2421 0x338e8, 0x338ec,
2422 0x33900, 0x3392c,
2423 0x33934, 0x33950,
2424 0x33958, 0x33958,
2425 0x33960, 0x3398c,
2426 0x3399c, 0x339ac,
2427 0x339c0, 0x339c0,
2428 0x339c8, 0x339d0,
2429 0x339d8, 0x339e0,
2430 0x339ec, 0x33a90,
2431 0x33a98, 0x33ac4,
2432 0x33ae4, 0x33b10,
2433 0x33b24, 0x33b28,
2434 0x33b38, 0x33b50,
2435 0x33bf0, 0x33c10,
2436 0x33c24, 0x33c28,
2437 0x33c38, 0x33c50,
2438 0x33cf0, 0x33cfc,
2439 0x34000, 0x34030,
2440 0x34100, 0x34168,
2441 0x34190, 0x341a0,
2442 0x341a8, 0x341b8,
2443 0x341c4, 0x341c8,
2444 0x341d0, 0x341d0,
2445 0x34200, 0x34320,
2446 0x34400, 0x344b4,
2447 0x344c0, 0x3452c,
2448 0x34540, 0x3461c,
2449 0x34800, 0x348a0,
2450 0x348c0, 0x34908,
2451 0x34910, 0x349b8,
2452 0x34a00, 0x34a04,
2453 0x34a0c, 0x34a14,
2454 0x34a1c, 0x34a2c,
2455 0x34a44, 0x34a50,
2456 0x34a74, 0x34a74,
2457 0x34a7c, 0x34afc,
2458 0x34b08, 0x34c24,
2459 0x34d00, 0x34d14,
2460 0x34d1c, 0x34d3c,
2461 0x34d44, 0x34d4c,
2462 0x34d54, 0x34d74,
2463 0x34d7c, 0x34d7c,
2464 0x34de0, 0x34de0,
2465 0x34e00, 0x34ed4,
2466 0x34f00, 0x34fa4,
2467 0x34fc0, 0x34fc4,
2468 0x35000, 0x35004,
2469 0x35080, 0x350fc,
2470 0x35208, 0x35220,
2471 0x3523c, 0x35254,
2472 0x35300, 0x35300,
2473 0x35308, 0x3531c,
2474 0x35338, 0x3533c,
2475 0x35380, 0x35380,
2476 0x35388, 0x353a8,
2477 0x353b4, 0x353b4,
2478 0x35400, 0x35420,
2479 0x35438, 0x3543c,
2480 0x35480, 0x35480,
2481 0x354a8, 0x354a8,
2482 0x354b0, 0x354b4,
2483 0x354c8, 0x354d4,
2484 0x35a40, 0x35a4c,
2485 0x35af0, 0x35b20,
2486 0x35b38, 0x35b3c,
2487 0x35b80, 0x35b80,
2488 0x35ba8, 0x35ba8,
2489 0x35bb0, 0x35bb4,
2490 0x35bc8, 0x35bd4,
2491 0x36140, 0x3618c,
2492 0x361f0, 0x361f4,
2493 0x36200, 0x36200,
2494 0x36218, 0x36218,
2495 0x36400, 0x36400,
2496 0x36408, 0x3641c,
2497 0x36618, 0x36620,
2498 0x36664, 0x36664,
2499 0x366a8, 0x366a8,
2500 0x366ec, 0x366ec,
2501 0x36a00, 0x36abc,
2502 0x36b00, 0x36b18,
2503 0x36b20, 0x36b38,
2504 0x36b40, 0x36b58,
2505 0x36b60, 0x36b78,
2506 0x36c00, 0x36c00,
2507 0x36c08, 0x36c3c,
2508 0x37000, 0x3702c,
2509 0x37034, 0x37050,
2510 0x37058, 0x37058,
2511 0x37060, 0x3708c,
2512 0x3709c, 0x370ac,
2513 0x370c0, 0x370c0,
2514 0x370c8, 0x370d0,
2515 0x370d8, 0x370e0,
2516 0x370ec, 0x3712c,
2517 0x37134, 0x37150,
2518 0x37158, 0x37158,
2519 0x37160, 0x3718c,
2520 0x3719c, 0x371ac,
2521 0x371c0, 0x371c0,
2522 0x371c8, 0x371d0,
2523 0x371d8, 0x371e0,
2524 0x371ec, 0x37290,
2525 0x37298, 0x372c4,
2526 0x372e4, 0x37390,
2527 0x37398, 0x373c4,
2528 0x373e4, 0x3742c,
2529 0x37434, 0x37450,
2530 0x37458, 0x37458,
2531 0x37460, 0x3748c,
2532 0x3749c, 0x374ac,
2533 0x374c0, 0x374c0,
2534 0x374c8, 0x374d0,
2535 0x374d8, 0x374e0,
2536 0x374ec, 0x3752c,
2537 0x37534, 0x37550,
2538 0x37558, 0x37558,
2539 0x37560, 0x3758c,
2540 0x3759c, 0x375ac,
2541 0x375c0, 0x375c0,
2542 0x375c8, 0x375d0,
2543 0x375d8, 0x375e0,
2544 0x375ec, 0x37690,
2545 0x37698, 0x376c4,
2546 0x376e4, 0x37790,
2547 0x37798, 0x377c4,
2548 0x377e4, 0x377fc,
2549 0x37814, 0x37814,
2550 0x37854, 0x37868,
2551 0x37880, 0x3788c,
2552 0x378c0, 0x378d0,
2553 0x378e8, 0x378ec,
2554 0x37900, 0x3792c,
2555 0x37934, 0x37950,
2556 0x37958, 0x37958,
2557 0x37960, 0x3798c,
2558 0x3799c, 0x379ac,
2559 0x379c0, 0x379c0,
2560 0x379c8, 0x379d0,
2561 0x379d8, 0x379e0,
2562 0x379ec, 0x37a90,
2563 0x37a98, 0x37ac4,
2564 0x37ae4, 0x37b10,
2565 0x37b24, 0x37b28,
2566 0x37b38, 0x37b50,
2567 0x37bf0, 0x37c10,
2568 0x37c24, 0x37c28,
2569 0x37c38, 0x37c50,
2570 0x37cf0, 0x37cfc,
2571 0x40040, 0x40040,
2572 0x40080, 0x40084,
2573 0x40100, 0x40100,
2574 0x40140, 0x401bc,
2575 0x40200, 0x40214,
2576 0x40228, 0x40228,
2577 0x40240, 0x40258,
2578 0x40280, 0x40280,
2579 0x40304, 0x40304,
2580 0x40330, 0x4033c,
2581 0x41304, 0x413c8,
2582 0x413d0, 0x413dc,
2583 0x413f0, 0x413f0,
2584 0x41400, 0x4140c,
2585 0x41414, 0x4141c,
2586 0x41480, 0x414d0,
2587 0x44000, 0x4407c,
2588 0x440c0, 0x441ac,
2589 0x441b4, 0x4427c,
2590 0x442c0, 0x443ac,
2591 0x443b4, 0x4447c,
2592 0x444c0, 0x445ac,
2593 0x445b4, 0x4467c,
2594 0x446c0, 0x447ac,
2595 0x447b4, 0x4487c,
2596 0x448c0, 0x449ac,
2597 0x449b4, 0x44a7c,
2598 0x44ac0, 0x44bac,
2599 0x44bb4, 0x44c7c,
2600 0x44cc0, 0x44dac,
2601 0x44db4, 0x44e7c,
2602 0x44ec0, 0x44fac,
2603 0x44fb4, 0x4507c,
2604 0x450c0, 0x451ac,
2605 0x451b4, 0x451fc,
2606 0x45800, 0x45804,
2607 0x45810, 0x45830,
2608 0x45840, 0x45860,
2609 0x45868, 0x45868,
2610 0x45880, 0x45884,
2611 0x458a0, 0x458b0,
2612 0x45a00, 0x45a04,
2613 0x45a10, 0x45a30,
2614 0x45a40, 0x45a60,
2615 0x45a68, 0x45a68,
2616 0x45a80, 0x45a84,
2617 0x45aa0, 0x45ab0,
2618 0x460c0, 0x460e4,
2619 0x47000, 0x4703c,
2620 0x47044, 0x4708c,
2621 0x47200, 0x47250,
2622 0x47400, 0x47408,
2623 0x47414, 0x47420,
2624 0x47600, 0x47618,
2625 0x47800, 0x47814,
2626 0x47820, 0x4782c,
2627 0x50000, 0x50084,
2628 0x50090, 0x500cc,
2629 0x50300, 0x50384,
2630 0x50400, 0x50400,
2631 0x50800, 0x50884,
2632 0x50890, 0x508cc,
2633 0x50b00, 0x50b84,
2634 0x50c00, 0x50c00,
2635 0x51000, 0x51020,
2636 0x51028, 0x510b0,
2637 0x51300, 0x51324,
2638 };
2639
2640 u32 *buf_end = (u32 *)((char *)buf + buf_size);
2641 const unsigned int *reg_ranges;
2642 int reg_ranges_size, range;
2643 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
2644
2645 /* Select the right set of register ranges to dump depending on the
2646 * adapter chip type.
2647 */
2648 switch (chip_version) {
2649 case CHELSIO_T4:
2650 reg_ranges = t4_reg_ranges;
2651 reg_ranges_size = ARRAY_SIZE(t4_reg_ranges);
2652 break;
2653
2654 case CHELSIO_T5:
2655 reg_ranges = t5_reg_ranges;
2656 reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
2657 break;
2658
2659 case CHELSIO_T6:
2660 reg_ranges = t6_reg_ranges;
2661 reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
2662 break;
2663
2664 default:
2665 dev_err(adap->pdev_dev,
2666 "Unsupported chip version %d\n", chip_version);
2667 return;
2668 }
2669
2670 /* Clear the register buffer and insert the appropriate register
2671 * values selected by the above register ranges.
2672 */
2673 memset(buf, 0, buf_size);
2674 for (range = 0; range < reg_ranges_size; range += 2) {
2675 unsigned int reg = reg_ranges[range];
2676 unsigned int last_reg = reg_ranges[range + 1];
2677 u32 *bufp = (u32 *)((char *)buf + reg);
2678
2679 /* Iterate across the register range filling in the register
2680 * buffer but don't write past the end of the register buffer.
2681 */
2682 while (reg <= last_reg && bufp < buf_end) {
2683 *bufp++ = t4_read_reg(adap, reg);
2684 reg += sizeof(u32);
2685 }
2686 }
2687 }
2688
2689 #define EEPROM_STAT_ADDR 0x7bfc
2690 #define VPD_BASE 0x400
2691 #define VPD_BASE_OLD 0
2692 #define VPD_LEN 1024
2693
2694 /**
2695 * t4_eeprom_ptov - translate a physical EEPROM address to virtual
2696 * @phys_addr: the physical EEPROM address
2697 * @fn: the PCI function number
2698 * @sz: size of function-specific area
2699 *
2700 * Translate a physical EEPROM address to virtual. The first 1K is
2701 * accessed through virtual addresses starting at 31K, the rest is
2702 * accessed through virtual addresses starting at 0.
2703 *
2704 * The mapping is as follows:
2705 * [0..1K) -> [31K..32K)
2706 * [1K..1K+A) -> [31K-A..31K)
2707 * [1K+A..ES) -> [0..ES-A-1K)
2708 *
2709 * where A = @fn * @sz, and ES = EEPROM size.
2710 */
t4_eeprom_ptov(unsigned int phys_addr,unsigned int fn,unsigned int sz)2711 int t4_eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz)
2712 {
2713 fn *= sz;
2714 if (phys_addr < 1024)
2715 return phys_addr + (31 << 10);
2716 if (phys_addr < 1024 + fn)
2717 return 31744 - fn + phys_addr - 1024;
2718 if (phys_addr < EEPROMSIZE)
2719 return phys_addr - 1024 - fn;
2720 return -EINVAL;
2721 }
2722
2723 /**
2724 * t4_seeprom_wp - enable/disable EEPROM write protection
2725 * @adapter: the adapter
2726 * @enable: whether to enable or disable write protection
2727 *
2728 * Enables or disables write protection on the serial EEPROM.
2729 */
t4_seeprom_wp(struct adapter * adapter,bool enable)2730 int t4_seeprom_wp(struct adapter *adapter, bool enable)
2731 {
2732 unsigned int v = enable ? 0xc : 0;
2733 int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v);
2734 return ret < 0 ? ret : 0;
2735 }
2736
2737 /**
2738 * t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM
2739 * @adapter: adapter to read
2740 * @p: where to store the parameters
2741 *
2742 * Reads card parameters stored in VPD EEPROM.
2743 */
t4_get_raw_vpd_params(struct adapter * adapter,struct vpd_params * p)2744 int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
2745 {
2746 unsigned int id_len, pn_len, sn_len, na_len;
2747 int id, sn, pn, na, addr, ret = 0;
2748 u8 *vpd, base_val = 0;
2749
2750 vpd = vmalloc(VPD_LEN);
2751 if (!vpd)
2752 return -ENOMEM;
2753
2754 /* Card information normally starts at VPD_BASE but early cards had
2755 * it at 0.
2756 */
2757 ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val);
2758 if (ret < 0)
2759 goto out;
2760
2761 addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : VPD_BASE_OLD;
2762
2763 ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
2764 if (ret < 0)
2765 goto out;
2766
2767 ret = pci_vpd_find_id_string(vpd, VPD_LEN, &id_len);
2768 if (ret < 0)
2769 goto out;
2770 id = ret;
2771
2772 ret = pci_vpd_check_csum(vpd, VPD_LEN);
2773 if (ret) {
2774 dev_err(adapter->pdev_dev, "VPD checksum incorrect or missing\n");
2775 ret = -EINVAL;
2776 goto out;
2777 }
2778
2779 ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
2780 PCI_VPD_RO_KEYWORD_SERIALNO, &sn_len);
2781 if (ret < 0)
2782 goto out;
2783 sn = ret;
2784
2785 ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
2786 PCI_VPD_RO_KEYWORD_PARTNO, &pn_len);
2787 if (ret < 0)
2788 goto out;
2789 pn = ret;
2790
2791 ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN, "NA", &na_len);
2792 if (ret < 0)
2793 goto out;
2794 na = ret;
2795
2796 memcpy(p->id, vpd + id, min_t(unsigned int, id_len, ID_LEN));
2797 strim(p->id);
2798 memcpy(p->sn, vpd + sn, min_t(unsigned int, sn_len, SERNUM_LEN));
2799 strim(p->sn);
2800 memcpy(p->pn, vpd + pn, min_t(unsigned int, pn_len, PN_LEN));
2801 strim(p->pn);
2802 memcpy(p->na, vpd + na, min_t(unsigned int, na_len, MACADDR_LEN));
2803 strim(p->na);
2804
2805 out:
2806 vfree(vpd);
2807 if (ret < 0) {
2808 dev_err(adapter->pdev_dev, "error reading VPD\n");
2809 return ret;
2810 }
2811
2812 return 0;
2813 }
2814
2815 /**
2816 * t4_get_vpd_params - read VPD parameters & retrieve Core Clock
2817 * @adapter: adapter to read
2818 * @p: where to store the parameters
2819 *
2820 * Reads card parameters stored in VPD EEPROM and retrieves the Core
2821 * Clock. This can only be called after a connection to the firmware
2822 * is established.
2823 */
t4_get_vpd_params(struct adapter * adapter,struct vpd_params * p)2824 int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p)
2825 {
2826 u32 cclk_param, cclk_val;
2827 int ret;
2828
2829 /* Grab the raw VPD parameters.
2830 */
2831 ret = t4_get_raw_vpd_params(adapter, p);
2832 if (ret)
2833 return ret;
2834
2835 /* Ask firmware for the Core Clock since it knows how to translate the
2836 * Reference Clock ('V2') VPD field into a Core Clock value ...
2837 */
2838 cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
2839 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK));
2840 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
2841 1, &cclk_param, &cclk_val);
2842
2843 if (ret)
2844 return ret;
2845 p->cclk = cclk_val;
2846
2847 return 0;
2848 }
2849
2850 /**
2851 * t4_get_pfres - retrieve VF resource limits
2852 * @adapter: the adapter
2853 *
2854 * Retrieves configured resource limits and capabilities for a physical
2855 * function. The results are stored in @adapter->pfres.
2856 */
t4_get_pfres(struct adapter * adapter)2857 int t4_get_pfres(struct adapter *adapter)
2858 {
2859 struct pf_resources *pfres = &adapter->params.pfres;
2860 struct fw_pfvf_cmd cmd, rpl;
2861 int v;
2862 u32 word;
2863
2864 /* Execute PFVF Read command to get VF resource limits; bail out early
2865 * with error on command failure.
2866 */
2867 memset(&cmd, 0, sizeof(cmd));
2868 cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) |
2869 FW_CMD_REQUEST_F |
2870 FW_CMD_READ_F |
2871 FW_PFVF_CMD_PFN_V(adapter->pf) |
2872 FW_PFVF_CMD_VFN_V(0));
2873 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
2874 v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
2875 if (v != FW_SUCCESS)
2876 return v;
2877
2878 /* Extract PF resource limits and return success.
2879 */
2880 word = be32_to_cpu(rpl.niqflint_niq);
2881 pfres->niqflint = FW_PFVF_CMD_NIQFLINT_G(word);
2882 pfres->niq = FW_PFVF_CMD_NIQ_G(word);
2883
2884 word = be32_to_cpu(rpl.type_to_neq);
2885 pfres->neq = FW_PFVF_CMD_NEQ_G(word);
2886 pfres->pmask = FW_PFVF_CMD_PMASK_G(word);
2887
2888 word = be32_to_cpu(rpl.tc_to_nexactf);
2889 pfres->tc = FW_PFVF_CMD_TC_G(word);
2890 pfres->nvi = FW_PFVF_CMD_NVI_G(word);
2891 pfres->nexactf = FW_PFVF_CMD_NEXACTF_G(word);
2892
2893 word = be32_to_cpu(rpl.r_caps_to_nethctrl);
2894 pfres->r_caps = FW_PFVF_CMD_R_CAPS_G(word);
2895 pfres->wx_caps = FW_PFVF_CMD_WX_CAPS_G(word);
2896 pfres->nethctrl = FW_PFVF_CMD_NETHCTRL_G(word);
2897
2898 return 0;
2899 }
2900
2901 /* serial flash and firmware constants */
2902 enum {
2903 SF_ATTEMPTS = 10, /* max retries for SF operations */
2904
2905 /* flash command opcodes */
2906 SF_PROG_PAGE = 2, /* program page */
2907 SF_WR_DISABLE = 4, /* disable writes */
2908 SF_RD_STATUS = 5, /* read status register */
2909 SF_WR_ENABLE = 6, /* enable writes */
2910 SF_RD_DATA_FAST = 0xb, /* read flash */
2911 SF_RD_ID = 0x9f, /* read ID */
2912 SF_ERASE_SECTOR = 0xd8, /* erase sector */
2913 };
2914
2915 /**
2916 * sf1_read - read data from the serial flash
2917 * @adapter: the adapter
2918 * @byte_cnt: number of bytes to read
2919 * @cont: whether another operation will be chained
2920 * @lock: whether to lock SF for PL access only
2921 * @valp: where to store the read data
2922 *
2923 * Reads up to 4 bytes of data from the serial flash. The location of
2924 * the read needs to be specified prior to calling this by issuing the
2925 * appropriate commands to the serial flash.
2926 */
sf1_read(struct adapter * adapter,unsigned int byte_cnt,int cont,int lock,u32 * valp)2927 static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
2928 int lock, u32 *valp)
2929 {
2930 int ret;
2931
2932 if (!byte_cnt || byte_cnt > 4)
2933 return -EINVAL;
2934 if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
2935 return -EBUSY;
2936 t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
2937 SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1));
2938 ret = t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
2939 if (!ret)
2940 *valp = t4_read_reg(adapter, SF_DATA_A);
2941 return ret;
2942 }
2943
2944 /**
2945 * sf1_write - write data to the serial flash
2946 * @adapter: the adapter
2947 * @byte_cnt: number of bytes to write
2948 * @cont: whether another operation will be chained
2949 * @lock: whether to lock SF for PL access only
2950 * @val: value to write
2951 *
2952 * Writes up to 4 bytes of data to the serial flash. The location of
2953 * the write needs to be specified prior to calling this by issuing the
2954 * appropriate commands to the serial flash.
2955 */
sf1_write(struct adapter * adapter,unsigned int byte_cnt,int cont,int lock,u32 val)2956 static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
2957 int lock, u32 val)
2958 {
2959 if (!byte_cnt || byte_cnt > 4)
2960 return -EINVAL;
2961 if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
2962 return -EBUSY;
2963 t4_write_reg(adapter, SF_DATA_A, val);
2964 t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
2965 SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | OP_V(1));
2966 return t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
2967 }
2968
2969 /**
2970 * flash_wait_op - wait for a flash operation to complete
2971 * @adapter: the adapter
2972 * @attempts: max number of polls of the status register
2973 * @delay: delay between polls in ms
2974 *
2975 * Wait for a flash operation to complete by polling the status register.
2976 */
flash_wait_op(struct adapter * adapter,int attempts,int delay)2977 static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
2978 {
2979 int ret;
2980 u32 status;
2981
2982 while (1) {
2983 if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 ||
2984 (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0)
2985 return ret;
2986 if (!(status & 1))
2987 return 0;
2988 if (--attempts == 0)
2989 return -EAGAIN;
2990 if (delay)
2991 msleep(delay);
2992 }
2993 }
2994
2995 /**
2996 * t4_read_flash - read words from serial flash
2997 * @adapter: the adapter
2998 * @addr: the start address for the read
2999 * @nwords: how many 32-bit words to read
3000 * @data: where to store the read data
3001 * @byte_oriented: whether to store data as bytes or as words
3002 *
3003 * Read the specified number of 32-bit words from the serial flash.
3004 * If @byte_oriented is set the read data is stored as a byte array
3005 * (i.e., big-endian), otherwise as 32-bit words in the platform's
3006 * natural endianness.
3007 */
t4_read_flash(struct adapter * adapter,unsigned int addr,unsigned int nwords,u32 * data,int byte_oriented)3008 int t4_read_flash(struct adapter *adapter, unsigned int addr,
3009 unsigned int nwords, u32 *data, int byte_oriented)
3010 {
3011 int ret;
3012
3013 if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3))
3014 return -EINVAL;
3015
3016 addr = swab32(addr) | SF_RD_DATA_FAST;
3017
3018 if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 ||
3019 (ret = sf1_read(adapter, 1, 1, 0, data)) != 0)
3020 return ret;
3021
3022 for ( ; nwords; nwords--, data++) {
3023 ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
3024 if (nwords == 1)
3025 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3026 if (ret)
3027 return ret;
3028 if (byte_oriented)
3029 *data = (__force __u32)(cpu_to_be32(*data));
3030 }
3031 return 0;
3032 }
3033
3034 /**
3035 * t4_write_flash - write up to a page of data to the serial flash
3036 * @adapter: the adapter
3037 * @addr: the start address to write
3038 * @n: length of data to write in bytes
3039 * @data: the data to write
3040 * @byte_oriented: whether to store data as bytes or as words
3041 *
3042 * Writes up to a page of data (256 bytes) to the serial flash starting
3043 * at the given address. All the data must be written to the same page.
3044 * If @byte_oriented is set the write data is stored as byte stream
3045 * (i.e. matches what on disk), otherwise in big-endian.
3046 */
t4_write_flash(struct adapter * adapter,unsigned int addr,unsigned int n,const u8 * data,bool byte_oriented)3047 static int t4_write_flash(struct adapter *adapter, unsigned int addr,
3048 unsigned int n, const u8 *data, bool byte_oriented)
3049 {
3050 unsigned int i, c, left, val, offset = addr & 0xff;
3051 u32 buf[64];
3052 int ret;
3053
3054 if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
3055 return -EINVAL;
3056
3057 val = swab32(addr) | SF_PROG_PAGE;
3058
3059 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
3060 (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
3061 goto unlock;
3062
3063 for (left = n; left; left -= c, data += c) {
3064 c = min(left, 4U);
3065 for (val = 0, i = 0; i < c; ++i) {
3066 if (byte_oriented)
3067 val = (val << 8) + data[i];
3068 else
3069 val = (val << 8) + data[c - i - 1];
3070 }
3071
3072 ret = sf1_write(adapter, c, c != left, 1, val);
3073 if (ret)
3074 goto unlock;
3075 }
3076 ret = flash_wait_op(adapter, 8, 1);
3077 if (ret)
3078 goto unlock;
3079
3080 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3081
3082 /* Read the page to verify the write succeeded */
3083 ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf,
3084 byte_oriented);
3085 if (ret)
3086 return ret;
3087
3088 if (memcmp(data - n, (u8 *)buf + offset, n)) {
3089 dev_err(adapter->pdev_dev,
3090 "failed to correctly write the flash page at %#x\n",
3091 addr);
3092 return -EIO;
3093 }
3094 return 0;
3095
3096 unlock:
3097 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3098 return ret;
3099 }
3100
3101 /**
3102 * t4_get_fw_version - read the firmware version
3103 * @adapter: the adapter
3104 * @vers: where to place the version
3105 *
3106 * Reads the FW version from flash.
3107 */
t4_get_fw_version(struct adapter * adapter,u32 * vers)3108 int t4_get_fw_version(struct adapter *adapter, u32 *vers)
3109 {
3110 return t4_read_flash(adapter, FLASH_FW_START +
3111 offsetof(struct fw_hdr, fw_ver), 1,
3112 vers, 0);
3113 }
3114
3115 /**
3116 * t4_get_bs_version - read the firmware bootstrap version
3117 * @adapter: the adapter
3118 * @vers: where to place the version
3119 *
3120 * Reads the FW Bootstrap version from flash.
3121 */
t4_get_bs_version(struct adapter * adapter,u32 * vers)3122 int t4_get_bs_version(struct adapter *adapter, u32 *vers)
3123 {
3124 return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
3125 offsetof(struct fw_hdr, fw_ver), 1,
3126 vers, 0);
3127 }
3128
3129 /**
3130 * t4_get_tp_version - read the TP microcode version
3131 * @adapter: the adapter
3132 * @vers: where to place the version
3133 *
3134 * Reads the TP microcode version from flash.
3135 */
t4_get_tp_version(struct adapter * adapter,u32 * vers)3136 int t4_get_tp_version(struct adapter *adapter, u32 *vers)
3137 {
3138 return t4_read_flash(adapter, FLASH_FW_START +
3139 offsetof(struct fw_hdr, tp_microcode_ver),
3140 1, vers, 0);
3141 }
3142
3143 /**
3144 * t4_get_exprom_version - return the Expansion ROM version (if any)
3145 * @adap: the adapter
3146 * @vers: where to place the version
3147 *
3148 * Reads the Expansion ROM header from FLASH and returns the version
3149 * number (if present) through the @vers return value pointer. We return
3150 * this in the Firmware Version Format since it's convenient. Return
3151 * 0 on success, -ENOENT if no Expansion ROM is present.
3152 */
t4_get_exprom_version(struct adapter * adap,u32 * vers)3153 int t4_get_exprom_version(struct adapter *adap, u32 *vers)
3154 {
3155 struct exprom_header {
3156 unsigned char hdr_arr[16]; /* must start with 0x55aa */
3157 unsigned char hdr_ver[4]; /* Expansion ROM version */
3158 } *hdr;
3159 u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
3160 sizeof(u32))];
3161 int ret;
3162
3163 ret = t4_read_flash(adap, FLASH_EXP_ROM_START,
3164 ARRAY_SIZE(exprom_header_buf), exprom_header_buf,
3165 0);
3166 if (ret)
3167 return ret;
3168
3169 hdr = (struct exprom_header *)exprom_header_buf;
3170 if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
3171 return -ENOENT;
3172
3173 *vers = (FW_HDR_FW_VER_MAJOR_V(hdr->hdr_ver[0]) |
3174 FW_HDR_FW_VER_MINOR_V(hdr->hdr_ver[1]) |
3175 FW_HDR_FW_VER_MICRO_V(hdr->hdr_ver[2]) |
3176 FW_HDR_FW_VER_BUILD_V(hdr->hdr_ver[3]));
3177 return 0;
3178 }
3179
3180 /**
3181 * t4_get_vpd_version - return the VPD version
3182 * @adapter: the adapter
3183 * @vers: where to place the version
3184 *
3185 * Reads the VPD via the Firmware interface (thus this can only be called
3186 * once we're ready to issue Firmware commands). The format of the
3187 * VPD version is adapter specific. Returns 0 on success, an error on
3188 * failure.
3189 *
3190 * Note that early versions of the Firmware didn't include the ability
3191 * to retrieve the VPD version, so we zero-out the return-value parameter
3192 * in that case to avoid leaving it with garbage in it.
3193 *
3194 * Also note that the Firmware will return its cached copy of the VPD
3195 * Revision ID, not the actual Revision ID as written in the Serial
3196 * EEPROM. This is only an issue if a new VPD has been written and the
3197 * Firmware/Chip haven't yet gone through a RESET sequence. So it's best
3198 * to defer calling this routine till after a FW_RESET_CMD has been issued
3199 * if the Host Driver will be performing a full adapter initialization.
3200 */
t4_get_vpd_version(struct adapter * adapter,u32 * vers)3201 int t4_get_vpd_version(struct adapter *adapter, u32 *vers)
3202 {
3203 u32 vpdrev_param;
3204 int ret;
3205
3206 vpdrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3207 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_VPDREV));
3208 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
3209 1, &vpdrev_param, vers);
3210 if (ret)
3211 *vers = 0;
3212 return ret;
3213 }
3214
3215 /**
3216 * t4_get_scfg_version - return the Serial Configuration version
3217 * @adapter: the adapter
3218 * @vers: where to place the version
3219 *
3220 * Reads the Serial Configuration Version via the Firmware interface
3221 * (thus this can only be called once we're ready to issue Firmware
3222 * commands). The format of the Serial Configuration version is
3223 * adapter specific. Returns 0 on success, an error on failure.
3224 *
3225 * Note that early versions of the Firmware didn't include the ability
3226 * to retrieve the Serial Configuration version, so we zero-out the
3227 * return-value parameter in that case to avoid leaving it with
3228 * garbage in it.
3229 *
3230 * Also note that the Firmware will return its cached copy of the Serial
3231 * Initialization Revision ID, not the actual Revision ID as written in
3232 * the Serial EEPROM. This is only an issue if a new VPD has been written
3233 * and the Firmware/Chip haven't yet gone through a RESET sequence. So
3234 * it's best to defer calling this routine till after a FW_RESET_CMD has
3235 * been issued if the Host Driver will be performing a full adapter
3236 * initialization.
3237 */
t4_get_scfg_version(struct adapter * adapter,u32 * vers)3238 int t4_get_scfg_version(struct adapter *adapter, u32 *vers)
3239 {
3240 u32 scfgrev_param;
3241 int ret;
3242
3243 scfgrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3244 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_SCFGREV));
3245 ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
3246 1, &scfgrev_param, vers);
3247 if (ret)
3248 *vers = 0;
3249 return ret;
3250 }
3251
3252 /**
3253 * t4_get_version_info - extract various chip/firmware version information
3254 * @adapter: the adapter
3255 *
3256 * Reads various chip/firmware version numbers and stores them into the
3257 * adapter Adapter Parameters structure. If any of the efforts fails
3258 * the first failure will be returned, but all of the version numbers
3259 * will be read.
3260 */
t4_get_version_info(struct adapter * adapter)3261 int t4_get_version_info(struct adapter *adapter)
3262 {
3263 int ret = 0;
3264
3265 #define FIRST_RET(__getvinfo) \
3266 do { \
3267 int __ret = __getvinfo; \
3268 if (__ret && !ret) \
3269 ret = __ret; \
3270 } while (0)
3271
3272 FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
3273 FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
3274 FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
3275 FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
3276 FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers));
3277 FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers));
3278
3279 #undef FIRST_RET
3280 return ret;
3281 }
3282
3283 /**
3284 * t4_dump_version_info - dump all of the adapter configuration IDs
3285 * @adapter: the adapter
3286 *
3287 * Dumps all of the various bits of adapter configuration version/revision
3288 * IDs information. This is typically called at some point after
3289 * t4_get_version_info() has been called.
3290 */
t4_dump_version_info(struct adapter * adapter)3291 void t4_dump_version_info(struct adapter *adapter)
3292 {
3293 /* Device information */
3294 dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
3295 adapter->params.vpd.id,
3296 CHELSIO_CHIP_RELEASE(adapter->params.chip));
3297 dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
3298 adapter->params.vpd.sn, adapter->params.vpd.pn);
3299
3300 /* Firmware Version */
3301 if (!adapter->params.fw_vers)
3302 dev_warn(adapter->pdev_dev, "No firmware loaded\n");
3303 else
3304 dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
3305 FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
3306 FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
3307 FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
3308 FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));
3309
3310 /* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
3311 * Firmware, so dev_info() is more appropriate here.)
3312 */
3313 if (!adapter->params.bs_vers)
3314 dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
3315 else
3316 dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
3317 FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
3318 FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
3319 FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
3320 FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));
3321
3322 /* TP Microcode Version */
3323 if (!adapter->params.tp_vers)
3324 dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
3325 else
3326 dev_info(adapter->pdev_dev,
3327 "TP Microcode version: %u.%u.%u.%u\n",
3328 FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
3329 FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
3330 FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
3331 FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));
3332
3333 /* Expansion ROM version */
3334 if (!adapter->params.er_vers)
3335 dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
3336 else
3337 dev_info(adapter->pdev_dev,
3338 "Expansion ROM version: %u.%u.%u.%u\n",
3339 FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
3340 FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
3341 FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
3342 FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));
3343
3344 /* Serial Configuration version */
3345 dev_info(adapter->pdev_dev, "Serial Configuration version: %#x\n",
3346 adapter->params.scfg_vers);
3347
3348 /* VPD Version */
3349 dev_info(adapter->pdev_dev, "VPD version: %#x\n",
3350 adapter->params.vpd_vers);
3351 }
3352
3353 /**
3354 * t4_check_fw_version - check if the FW is supported with this driver
3355 * @adap: the adapter
3356 *
3357 * Checks if an adapter's FW is compatible with the driver. Returns 0
3358 * if there's exact match, a negative error if the version could not be
3359 * read or there's a major version mismatch
3360 */
t4_check_fw_version(struct adapter * adap)3361 int t4_check_fw_version(struct adapter *adap)
3362 {
3363 int i, ret, major, minor, micro;
3364 int exp_major, exp_minor, exp_micro;
3365 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
3366
3367 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3368 /* Try multiple times before returning error */
3369 for (i = 0; (ret == -EBUSY || ret == -EAGAIN) && i < 3; i++)
3370 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3371
3372 if (ret)
3373 return ret;
3374
3375 major = FW_HDR_FW_VER_MAJOR_G(adap->params.fw_vers);
3376 minor = FW_HDR_FW_VER_MINOR_G(adap->params.fw_vers);
3377 micro = FW_HDR_FW_VER_MICRO_G(adap->params.fw_vers);
3378
3379 switch (chip_version) {
3380 case CHELSIO_T4:
3381 exp_major = T4FW_MIN_VERSION_MAJOR;
3382 exp_minor = T4FW_MIN_VERSION_MINOR;
3383 exp_micro = T4FW_MIN_VERSION_MICRO;
3384 break;
3385 case CHELSIO_T5:
3386 exp_major = T5FW_MIN_VERSION_MAJOR;
3387 exp_minor = T5FW_MIN_VERSION_MINOR;
3388 exp_micro = T5FW_MIN_VERSION_MICRO;
3389 break;
3390 case CHELSIO_T6:
3391 exp_major = T6FW_MIN_VERSION_MAJOR;
3392 exp_minor = T6FW_MIN_VERSION_MINOR;
3393 exp_micro = T6FW_MIN_VERSION_MICRO;
3394 break;
3395 default:
3396 dev_err(adap->pdev_dev, "Unsupported chip type, %x\n",
3397 adap->chip);
3398 return -EINVAL;
3399 }
3400
3401 if (major < exp_major || (major == exp_major && minor < exp_minor) ||
3402 (major == exp_major && minor == exp_minor && micro < exp_micro)) {
3403 dev_err(adap->pdev_dev,
3404 "Card has firmware version %u.%u.%u, minimum "
3405 "supported firmware is %u.%u.%u.\n", major, minor,
3406 micro, exp_major, exp_minor, exp_micro);
3407 return -EFAULT;
3408 }
3409 return 0;
3410 }
3411
3412 /* Is the given firmware API compatible with the one the driver was compiled
3413 * with?
3414 */
fw_compatible(const struct fw_hdr * hdr1,const struct fw_hdr * hdr2)3415 static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2)
3416 {
3417
3418 /* short circuit if it's the exact same firmware version */
3419 if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver)
3420 return 1;
3421
3422 #define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x)
3423 if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) &&
3424 SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe))
3425 return 1;
3426 #undef SAME_INTF
3427
3428 return 0;
3429 }
3430
3431 /* The firmware in the filesystem is usable, but should it be installed?
3432 * This routine explains itself in detail if it indicates the filesystem
3433 * firmware should be installed.
3434 */
should_install_fs_fw(struct adapter * adap,int card_fw_usable,int k,int c)3435 static int should_install_fs_fw(struct adapter *adap, int card_fw_usable,
3436 int k, int c)
3437 {
3438 const char *reason;
3439
3440 if (!card_fw_usable) {
3441 reason = "incompatible or unusable";
3442 goto install;
3443 }
3444
3445 if (k > c) {
3446 reason = "older than the version supported with this driver";
3447 goto install;
3448 }
3449
3450 return 0;
3451
3452 install:
3453 dev_err(adap->pdev_dev, "firmware on card (%u.%u.%u.%u) is %s, "
3454 "installing firmware %u.%u.%u.%u on card.\n",
3455 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
3456 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason,
3457 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
3458 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
3459
3460 return 1;
3461 }
3462
t4_prep_fw(struct adapter * adap,struct fw_info * fw_info,const u8 * fw_data,unsigned int fw_size,struct fw_hdr * card_fw,enum dev_state state,int * reset)3463 int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
3464 const u8 *fw_data, unsigned int fw_size,
3465 struct fw_hdr *card_fw, enum dev_state state,
3466 int *reset)
3467 {
3468 int ret, card_fw_usable, fs_fw_usable;
3469 const struct fw_hdr *fs_fw;
3470 const struct fw_hdr *drv_fw;
3471
3472 drv_fw = &fw_info->fw_hdr;
3473
3474 /* Read the header of the firmware on the card */
3475 ret = t4_read_flash(adap, FLASH_FW_START,
3476 sizeof(*card_fw) / sizeof(uint32_t),
3477 (uint32_t *)card_fw, 1);
3478 if (ret == 0) {
3479 card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw);
3480 } else {
3481 dev_err(adap->pdev_dev,
3482 "Unable to read card's firmware header: %d\n", ret);
3483 card_fw_usable = 0;
3484 }
3485
3486 if (fw_data != NULL) {
3487 fs_fw = (const void *)fw_data;
3488 fs_fw_usable = fw_compatible(drv_fw, fs_fw);
3489 } else {
3490 fs_fw = NULL;
3491 fs_fw_usable = 0;
3492 }
3493
3494 if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver &&
3495 (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) {
3496 /* Common case: the firmware on the card is an exact match and
3497 * the filesystem one is an exact match too, or the filesystem
3498 * one is absent/incompatible.
3499 */
3500 } else if (fs_fw_usable && state == DEV_STATE_UNINIT &&
3501 should_install_fs_fw(adap, card_fw_usable,
3502 be32_to_cpu(fs_fw->fw_ver),
3503 be32_to_cpu(card_fw->fw_ver))) {
3504 ret = t4_fw_upgrade(adap, adap->mbox, fw_data,
3505 fw_size, 0);
3506 if (ret != 0) {
3507 dev_err(adap->pdev_dev,
3508 "failed to install firmware: %d\n", ret);
3509 goto bye;
3510 }
3511
3512 /* Installed successfully, update the cached header too. */
3513 *card_fw = *fs_fw;
3514 card_fw_usable = 1;
3515 *reset = 0; /* already reset as part of load_fw */
3516 }
3517
3518 if (!card_fw_usable) {
3519 uint32_t d, c, k;
3520
3521 d = be32_to_cpu(drv_fw->fw_ver);
3522 c = be32_to_cpu(card_fw->fw_ver);
3523 k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0;
3524
3525 dev_err(adap->pdev_dev, "Cannot find a usable firmware: "
3526 "chip state %d, "
3527 "driver compiled with %d.%d.%d.%d, "
3528 "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n",
3529 state,
3530 FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d),
3531 FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d),
3532 FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
3533 FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
3534 FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
3535 FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
3536 ret = -EINVAL;
3537 goto bye;
3538 }
3539
3540 /* We're using whatever's on the card and it's known to be good. */
3541 adap->params.fw_vers = be32_to_cpu(card_fw->fw_ver);
3542 adap->params.tp_vers = be32_to_cpu(card_fw->tp_microcode_ver);
3543
3544 bye:
3545 return ret;
3546 }
3547
3548 /**
3549 * t4_flash_erase_sectors - erase a range of flash sectors
3550 * @adapter: the adapter
3551 * @start: the first sector to erase
3552 * @end: the last sector to erase
3553 *
3554 * Erases the sectors in the given inclusive range.
3555 */
t4_flash_erase_sectors(struct adapter * adapter,int start,int end)3556 static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
3557 {
3558 int ret = 0;
3559
3560 if (end >= adapter->params.sf_nsec)
3561 return -EINVAL;
3562
3563 while (start <= end) {
3564 if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
3565 (ret = sf1_write(adapter, 4, 0, 1,
3566 SF_ERASE_SECTOR | (start << 8))) != 0 ||
3567 (ret = flash_wait_op(adapter, 14, 500)) != 0) {
3568 dev_err(adapter->pdev_dev,
3569 "erase of flash sector %d failed, error %d\n",
3570 start, ret);
3571 break;
3572 }
3573 start++;
3574 }
3575 t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
3576 return ret;
3577 }
3578
3579 /**
3580 * t4_flash_cfg_addr - return the address of the flash configuration file
3581 * @adapter: the adapter
3582 *
3583 * Return the address within the flash where the Firmware Configuration
3584 * File is stored.
3585 */
t4_flash_cfg_addr(struct adapter * adapter)3586 unsigned int t4_flash_cfg_addr(struct adapter *adapter)
3587 {
3588 if (adapter->params.sf_size == 0x100000)
3589 return FLASH_FPGA_CFG_START;
3590 else
3591 return FLASH_CFG_START;
3592 }
3593
3594 /* Return TRUE if the specified firmware matches the adapter. I.e. T4
3595 * firmware for T4 adapters, T5 firmware for T5 adapters, etc. We go ahead
3596 * and emit an error message for mismatched firmware to save our caller the
3597 * effort ...
3598 */
t4_fw_matches_chip(const struct adapter * adap,const struct fw_hdr * hdr)3599 static bool t4_fw_matches_chip(const struct adapter *adap,
3600 const struct fw_hdr *hdr)
3601 {
3602 /* The expression below will return FALSE for any unsupported adapter
3603 * which will keep us "honest" in the future ...
3604 */
3605 if ((is_t4(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T4) ||
3606 (is_t5(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T5) ||
3607 (is_t6(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T6))
3608 return true;
3609
3610 dev_err(adap->pdev_dev,
3611 "FW image (%d) is not suitable for this adapter (%d)\n",
3612 hdr->chip, CHELSIO_CHIP_VERSION(adap->params.chip));
3613 return false;
3614 }
3615
3616 /**
3617 * t4_load_fw - download firmware
3618 * @adap: the adapter
3619 * @fw_data: the firmware image to write
3620 * @size: image size
3621 *
3622 * Write the supplied firmware image to the card's serial flash.
3623 */
t4_load_fw(struct adapter * adap,const u8 * fw_data,unsigned int size)3624 int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
3625 {
3626 u32 csum;
3627 int ret, addr;
3628 unsigned int i;
3629 u8 first_page[SF_PAGE_SIZE];
3630 const __be32 *p = (const __be32 *)fw_data;
3631 const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data;
3632 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
3633 unsigned int fw_start_sec = FLASH_FW_START_SEC;
3634 unsigned int fw_size = FLASH_FW_MAX_SIZE;
3635 unsigned int fw_start = FLASH_FW_START;
3636
3637 if (!size) {
3638 dev_err(adap->pdev_dev, "FW image has no data\n");
3639 return -EINVAL;
3640 }
3641 if (size & 511) {
3642 dev_err(adap->pdev_dev,
3643 "FW image size not multiple of 512 bytes\n");
3644 return -EINVAL;
3645 }
3646 if ((unsigned int)be16_to_cpu(hdr->len512) * 512 != size) {
3647 dev_err(adap->pdev_dev,
3648 "FW image size differs from size in FW header\n");
3649 return -EINVAL;
3650 }
3651 if (size > fw_size) {
3652 dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n",
3653 fw_size);
3654 return -EFBIG;
3655 }
3656 if (!t4_fw_matches_chip(adap, hdr))
3657 return -EINVAL;
3658
3659 for (csum = 0, i = 0; i < size / sizeof(csum); i++)
3660 csum += be32_to_cpu(p[i]);
3661
3662 if (csum != 0xffffffff) {
3663 dev_err(adap->pdev_dev,
3664 "corrupted firmware image, checksum %#x\n", csum);
3665 return -EINVAL;
3666 }
3667
3668 i = DIV_ROUND_UP(size, sf_sec_size); /* # of sectors spanned */
3669 ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1);
3670 if (ret)
3671 goto out;
3672
3673 /*
3674 * We write the correct version at the end so the driver can see a bad
3675 * version if the FW write fails. Start by writing a copy of the
3676 * first page with a bad version.
3677 */
3678 memcpy(first_page, fw_data, SF_PAGE_SIZE);
3679 ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff);
3680 ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page, true);
3681 if (ret)
3682 goto out;
3683
3684 addr = fw_start;
3685 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
3686 addr += SF_PAGE_SIZE;
3687 fw_data += SF_PAGE_SIZE;
3688 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data, true);
3689 if (ret)
3690 goto out;
3691 }
3692
3693 ret = t4_write_flash(adap, fw_start + offsetof(struct fw_hdr, fw_ver),
3694 sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver,
3695 true);
3696 out:
3697 if (ret)
3698 dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
3699 ret);
3700 else
3701 ret = t4_get_fw_version(adap, &adap->params.fw_vers);
3702 return ret;
3703 }
3704
3705 /**
3706 * t4_phy_fw_ver - return current PHY firmware version
3707 * @adap: the adapter
3708 * @phy_fw_ver: return value buffer for PHY firmware version
3709 *
3710 * Returns the current version of external PHY firmware on the
3711 * adapter.
3712 */
t4_phy_fw_ver(struct adapter * adap,int * phy_fw_ver)3713 int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
3714 {
3715 u32 param, val;
3716 int ret;
3717
3718 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3719 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3720 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3721 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
3722 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
3723 ¶m, &val);
3724 if (ret)
3725 return ret;
3726 *phy_fw_ver = val;
3727 return 0;
3728 }
3729
3730 /**
3731 * t4_load_phy_fw - download port PHY firmware
3732 * @adap: the adapter
3733 * @win: the PCI-E Memory Window index to use for t4_memory_rw()
3734 * @phy_fw_version: function to check PHY firmware versions
3735 * @phy_fw_data: the PHY firmware image to write
3736 * @phy_fw_size: image size
3737 *
3738 * Transfer the specified PHY firmware to the adapter. If a non-NULL
3739 * @phy_fw_version is supplied, then it will be used to determine if
3740 * it's necessary to perform the transfer by comparing the version
3741 * of any existing adapter PHY firmware with that of the passed in
3742 * PHY firmware image.
3743 *
3744 * A negative error number will be returned if an error occurs. If
3745 * version number support is available and there's no need to upgrade
3746 * the firmware, 0 will be returned. If firmware is successfully
3747 * transferred to the adapter, 1 will be returned.
3748 *
3749 * NOTE: some adapters only have local RAM to store the PHY firmware. As
3750 * a result, a RESET of the adapter would cause that RAM to lose its
3751 * contents. Thus, loading PHY firmware on such adapters must happen
3752 * after any FW_RESET_CMDs ...
3753 */
t4_load_phy_fw(struct adapter * adap,int win,int (* phy_fw_version)(const u8 *,size_t),const u8 * phy_fw_data,size_t phy_fw_size)3754 int t4_load_phy_fw(struct adapter *adap, int win,
3755 int (*phy_fw_version)(const u8 *, size_t),
3756 const u8 *phy_fw_data, size_t phy_fw_size)
3757 {
3758 int cur_phy_fw_ver = 0, new_phy_fw_vers = 0;
3759 unsigned long mtype = 0, maddr = 0;
3760 u32 param, val;
3761 int ret;
3762
3763 /* If we have version number support, then check to see if the adapter
3764 * already has up-to-date PHY firmware loaded.
3765 */
3766 if (phy_fw_version) {
3767 new_phy_fw_vers = phy_fw_version(phy_fw_data, phy_fw_size);
3768 ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
3769 if (ret < 0)
3770 return ret;
3771
3772 if (cur_phy_fw_ver >= new_phy_fw_vers) {
3773 CH_WARN(adap, "PHY Firmware already up-to-date, "
3774 "version %#x\n", cur_phy_fw_ver);
3775 return 0;
3776 }
3777 }
3778
3779 /* Ask the firmware where it wants us to copy the PHY firmware image.
3780 * The size of the file requires a special version of the READ command
3781 * which will pass the file size via the values field in PARAMS_CMD and
3782 * retrieve the return value from firmware and place it in the same
3783 * buffer values
3784 */
3785 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3786 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3787 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3788 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
3789 val = phy_fw_size;
3790 ret = t4_query_params_rw(adap, adap->mbox, adap->pf, 0, 1,
3791 ¶m, &val, 1, true);
3792 if (ret < 0)
3793 return ret;
3794 mtype = val >> 8;
3795 maddr = (val & 0xff) << 16;
3796
3797 /* Copy the supplied PHY Firmware image to the adapter memory location
3798 * allocated by the adapter firmware.
3799 */
3800 spin_lock_bh(&adap->win0_lock);
3801 ret = t4_memory_rw(adap, win, mtype, maddr,
3802 phy_fw_size, (__be32 *)phy_fw_data,
3803 T4_MEMORY_WRITE);
3804 spin_unlock_bh(&adap->win0_lock);
3805 if (ret)
3806 return ret;
3807
3808 /* Tell the firmware that the PHY firmware image has been written to
3809 * RAM and it can now start copying it over to the PHYs. The chip
3810 * firmware will RESET the affected PHYs as part of this operation
3811 * leaving them running the new PHY firmware image.
3812 */
3813 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3814 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
3815 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
3816 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
3817 ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1,
3818 ¶m, &val, 30000);
3819 if (ret)
3820 return ret;
3821
3822 /* If we have version number support, then check to see that the new
3823 * firmware got loaded properly.
3824 */
3825 if (phy_fw_version) {
3826 ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
3827 if (ret < 0)
3828 return ret;
3829
3830 if (cur_phy_fw_ver != new_phy_fw_vers) {
3831 CH_WARN(adap, "PHY Firmware did not update: "
3832 "version on adapter %#x, "
3833 "version flashed %#x\n",
3834 cur_phy_fw_ver, new_phy_fw_vers);
3835 return -ENXIO;
3836 }
3837 }
3838
3839 return 1;
3840 }
3841
3842 /**
3843 * t4_fwcache - firmware cache operation
3844 * @adap: the adapter
3845 * @op : the operation (flush or flush and invalidate)
3846 */
t4_fwcache(struct adapter * adap,enum fw_params_param_dev_fwcache op)3847 int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op)
3848 {
3849 struct fw_params_cmd c;
3850
3851 memset(&c, 0, sizeof(c));
3852 c.op_to_vfn =
3853 cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
3854 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
3855 FW_PARAMS_CMD_PFN_V(adap->pf) |
3856 FW_PARAMS_CMD_VFN_V(0));
3857 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
3858 c.param[0].mnem =
3859 cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
3860 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE));
3861 c.param[0].val = cpu_to_be32(op);
3862
3863 return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL);
3864 }
3865
t4_cim_read_pif_la(struct adapter * adap,u32 * pif_req,u32 * pif_rsp,unsigned int * pif_req_wrptr,unsigned int * pif_rsp_wrptr)3866 void t4_cim_read_pif_la(struct adapter *adap, u32 *pif_req, u32 *pif_rsp,
3867 unsigned int *pif_req_wrptr,
3868 unsigned int *pif_rsp_wrptr)
3869 {
3870 int i, j;
3871 u32 cfg, val, req, rsp;
3872
3873 cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
3874 if (cfg & LADBGEN_F)
3875 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);
3876
3877 val = t4_read_reg(adap, CIM_DEBUGSTS_A);
3878 req = POLADBGWRPTR_G(val);
3879 rsp = PILADBGWRPTR_G(val);
3880 if (pif_req_wrptr)
3881 *pif_req_wrptr = req;
3882 if (pif_rsp_wrptr)
3883 *pif_rsp_wrptr = rsp;
3884
3885 for (i = 0; i < CIM_PIFLA_SIZE; i++) {
3886 for (j = 0; j < 6; j++) {
3887 t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(req) |
3888 PILADBGRDPTR_V(rsp));
3889 *pif_req++ = t4_read_reg(adap, CIM_PO_LA_DEBUGDATA_A);
3890 *pif_rsp++ = t4_read_reg(adap, CIM_PI_LA_DEBUGDATA_A);
3891 req++;
3892 rsp++;
3893 }
3894 req = (req + 2) & POLADBGRDPTR_M;
3895 rsp = (rsp + 2) & PILADBGRDPTR_M;
3896 }
3897 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
3898 }
3899
t4_cim_read_ma_la(struct adapter * adap,u32 * ma_req,u32 * ma_rsp)3900 void t4_cim_read_ma_la(struct adapter *adap, u32 *ma_req, u32 *ma_rsp)
3901 {
3902 u32 cfg;
3903 int i, j, idx;
3904
3905 cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
3906 if (cfg & LADBGEN_F)
3907 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);
3908
3909 for (i = 0; i < CIM_MALA_SIZE; i++) {
3910 for (j = 0; j < 5; j++) {
3911 idx = 8 * i + j;
3912 t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(idx) |
3913 PILADBGRDPTR_V(idx));
3914 *ma_req++ = t4_read_reg(adap, CIM_PO_LA_MADEBUGDATA_A);
3915 *ma_rsp++ = t4_read_reg(adap, CIM_PI_LA_MADEBUGDATA_A);
3916 }
3917 }
3918 t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
3919 }
3920
t4_ulprx_read_la(struct adapter * adap,u32 * la_buf)3921 void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf)
3922 {
3923 unsigned int i, j;
3924
3925 for (i = 0; i < 8; i++) {
3926 u32 *p = la_buf + i;
3927
3928 t4_write_reg(adap, ULP_RX_LA_CTL_A, i);
3929 j = t4_read_reg(adap, ULP_RX_LA_WRPTR_A);
3930 t4_write_reg(adap, ULP_RX_LA_RDPTR_A, j);
3931 for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8)
3932 *p = t4_read_reg(adap, ULP_RX_LA_RDDATA_A);
3933 }
3934 }
3935
3936 /* The ADVERT_MASK is used to mask out all of the Advertised Firmware Port
3937 * Capabilities which we control with separate controls -- see, for instance,
3938 * Pause Frames and Forward Error Correction. In order to determine what the
3939 * full set of Advertised Port Capabilities are, the base Advertised Port
3940 * Capabilities (masked by ADVERT_MASK) must be combined with the Advertised
3941 * Port Capabilities associated with those other controls. See
3942 * t4_link_acaps() for how this is done.
3943 */
3944 #define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
3945 FW_PORT_CAP32_ANEG)
3946
3947 /**
3948 * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
3949 * @caps16: a 16-bit Port Capabilities value
3950 *
3951 * Returns the equivalent 32-bit Port Capabilities value.
3952 */
fwcaps16_to_caps32(fw_port_cap16_t caps16)3953 static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
3954 {
3955 fw_port_cap32_t caps32 = 0;
3956
3957 #define CAP16_TO_CAP32(__cap) \
3958 do { \
3959 if (caps16 & FW_PORT_CAP_##__cap) \
3960 caps32 |= FW_PORT_CAP32_##__cap; \
3961 } while (0)
3962
3963 CAP16_TO_CAP32(SPEED_100M);
3964 CAP16_TO_CAP32(SPEED_1G);
3965 CAP16_TO_CAP32(SPEED_25G);
3966 CAP16_TO_CAP32(SPEED_10G);
3967 CAP16_TO_CAP32(SPEED_40G);
3968 CAP16_TO_CAP32(SPEED_100G);
3969 CAP16_TO_CAP32(FC_RX);
3970 CAP16_TO_CAP32(FC_TX);
3971 CAP16_TO_CAP32(ANEG);
3972 CAP16_TO_CAP32(FORCE_PAUSE);
3973 CAP16_TO_CAP32(MDIAUTO);
3974 CAP16_TO_CAP32(MDISTRAIGHT);
3975 CAP16_TO_CAP32(FEC_RS);
3976 CAP16_TO_CAP32(FEC_BASER_RS);
3977 CAP16_TO_CAP32(802_3_PAUSE);
3978 CAP16_TO_CAP32(802_3_ASM_DIR);
3979
3980 #undef CAP16_TO_CAP32
3981
3982 return caps32;
3983 }
3984
3985 /**
3986 * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
3987 * @caps32: a 32-bit Port Capabilities value
3988 *
3989 * Returns the equivalent 16-bit Port Capabilities value. Note that
3990 * not all 32-bit Port Capabilities can be represented in the 16-bit
3991 * Port Capabilities and some fields/values may not make it.
3992 */
fwcaps32_to_caps16(fw_port_cap32_t caps32)3993 static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
3994 {
3995 fw_port_cap16_t caps16 = 0;
3996
3997 #define CAP32_TO_CAP16(__cap) \
3998 do { \
3999 if (caps32 & FW_PORT_CAP32_##__cap) \
4000 caps16 |= FW_PORT_CAP_##__cap; \
4001 } while (0)
4002
4003 CAP32_TO_CAP16(SPEED_100M);
4004 CAP32_TO_CAP16(SPEED_1G);
4005 CAP32_TO_CAP16(SPEED_10G);
4006 CAP32_TO_CAP16(SPEED_25G);
4007 CAP32_TO_CAP16(SPEED_40G);
4008 CAP32_TO_CAP16(SPEED_100G);
4009 CAP32_TO_CAP16(FC_RX);
4010 CAP32_TO_CAP16(FC_TX);
4011 CAP32_TO_CAP16(802_3_PAUSE);
4012 CAP32_TO_CAP16(802_3_ASM_DIR);
4013 CAP32_TO_CAP16(ANEG);
4014 CAP32_TO_CAP16(FORCE_PAUSE);
4015 CAP32_TO_CAP16(MDIAUTO);
4016 CAP32_TO_CAP16(MDISTRAIGHT);
4017 CAP32_TO_CAP16(FEC_RS);
4018 CAP32_TO_CAP16(FEC_BASER_RS);
4019
4020 #undef CAP32_TO_CAP16
4021
4022 return caps16;
4023 }
4024
4025 /* Translate Firmware Port Capabilities Pause specification to Common Code */
fwcap_to_cc_pause(fw_port_cap32_t fw_pause)4026 static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
4027 {
4028 enum cc_pause cc_pause = 0;
4029
4030 if (fw_pause & FW_PORT_CAP32_FC_RX)
4031 cc_pause |= PAUSE_RX;
4032 if (fw_pause & FW_PORT_CAP32_FC_TX)
4033 cc_pause |= PAUSE_TX;
4034
4035 return cc_pause;
4036 }
4037
4038 /* Translate Common Code Pause specification into Firmware Port Capabilities */
cc_to_fwcap_pause(enum cc_pause cc_pause)4039 static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
4040 {
4041 /* Translate orthogonal RX/TX Pause Controls for L1 Configure
4042 * commands, etc.
4043 */
4044 fw_port_cap32_t fw_pause = 0;
4045
4046 if (cc_pause & PAUSE_RX)
4047 fw_pause |= FW_PORT_CAP32_FC_RX;
4048 if (cc_pause & PAUSE_TX)
4049 fw_pause |= FW_PORT_CAP32_FC_TX;
4050 if (!(cc_pause & PAUSE_AUTONEG))
4051 fw_pause |= FW_PORT_CAP32_FORCE_PAUSE;
4052
4053 /* Translate orthogonal Pause controls into IEEE 802.3 Pause,
4054 * Asymmetrical Pause for use in reporting to upper layer OS code, etc.
4055 * Note that these bits are ignored in L1 Configure commands.
4056 */
4057 if (cc_pause & PAUSE_RX) {
4058 if (cc_pause & PAUSE_TX)
4059 fw_pause |= FW_PORT_CAP32_802_3_PAUSE;
4060 else
4061 fw_pause |= FW_PORT_CAP32_802_3_ASM_DIR |
4062 FW_PORT_CAP32_802_3_PAUSE;
4063 } else if (cc_pause & PAUSE_TX) {
4064 fw_pause |= FW_PORT_CAP32_802_3_ASM_DIR;
4065 }
4066
4067 return fw_pause;
4068 }
4069
4070 /* Translate Firmware Forward Error Correction specification to Common Code */
fwcap_to_cc_fec(fw_port_cap32_t fw_fec)4071 static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
4072 {
4073 enum cc_fec cc_fec = 0;
4074
4075 if (fw_fec & FW_PORT_CAP32_FEC_RS)
4076 cc_fec |= FEC_RS;
4077 if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
4078 cc_fec |= FEC_BASER_RS;
4079
4080 return cc_fec;
4081 }
4082
4083 /* Translate Common Code Forward Error Correction specification to Firmware */
cc_to_fwcap_fec(enum cc_fec cc_fec)4084 static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
4085 {
4086 fw_port_cap32_t fw_fec = 0;
4087
4088 if (cc_fec & FEC_RS)
4089 fw_fec |= FW_PORT_CAP32_FEC_RS;
4090 if (cc_fec & FEC_BASER_RS)
4091 fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
4092
4093 return fw_fec;
4094 }
4095
4096 /**
4097 * t4_link_acaps - compute Link Advertised Port Capabilities
4098 * @adapter: the adapter
4099 * @port: the Port ID
4100 * @lc: the Port's Link Configuration
4101 *
4102 * Synthesize the Advertised Port Capabilities we'll be using based on
4103 * the base Advertised Port Capabilities (which have been filtered by
4104 * ADVERT_MASK) plus the individual controls for things like Pause
4105 * Frames, Forward Error Correction, MDI, etc.
4106 */
t4_link_acaps(struct adapter * adapter,unsigned int port,struct link_config * lc)4107 fw_port_cap32_t t4_link_acaps(struct adapter *adapter, unsigned int port,
4108 struct link_config *lc)
4109 {
4110 fw_port_cap32_t fw_fc, fw_fec, acaps;
4111 unsigned int fw_mdi;
4112 char cc_fec;
4113
4114 fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps);
4115
4116 /* Convert driver coding of Pause Frame Flow Control settings into the
4117 * Firmware's API.
4118 */
4119 fw_fc = cc_to_fwcap_pause(lc->requested_fc);
4120
4121 /* Convert Common Code Forward Error Control settings into the
4122 * Firmware's API. If the current Requested FEC has "Automatic"
4123 * (IEEE 802.3) specified, then we use whatever the Firmware
4124 * sent us as part of its IEEE 802.3-based interpretation of
4125 * the Transceiver Module EPROM FEC parameters. Otherwise we
4126 * use whatever is in the current Requested FEC settings.
4127 */
4128 if (lc->requested_fec & FEC_AUTO)
4129 cc_fec = fwcap_to_cc_fec(lc->def_acaps);
4130 else
4131 cc_fec = lc->requested_fec;
4132 fw_fec = cc_to_fwcap_fec(cc_fec);
4133
4134 /* Figure out what our Requested Port Capabilities are going to be.
4135 * Note parallel structure in t4_handle_get_port_info() and
4136 * init_link_config().
4137 */
4138 if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
4139 acaps = lc->acaps | fw_fc | fw_fec;
4140 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
4141 lc->fec = cc_fec;
4142 } else if (lc->autoneg == AUTONEG_DISABLE) {
4143 acaps = lc->speed_caps | fw_fc | fw_fec | fw_mdi;
4144 lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
4145 lc->fec = cc_fec;
4146 } else {
4147 acaps = lc->acaps | fw_fc | fw_fec | fw_mdi;
4148 }
4149
4150 /* Some Requested Port Capabilities are trivially wrong if they exceed
4151 * the Physical Port Capabilities. We can check that here and provide
4152 * moderately useful feedback in the system log.
4153 *
4154 * Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
4155 * we need to exclude this from this check in order to maintain
4156 * compatibility ...
4157 */
4158 if ((acaps & ~lc->pcaps) & ~FW_PORT_CAP32_FORCE_PAUSE) {
4159 dev_err(adapter->pdev_dev, "Requested Port Capabilities %#x exceed Physical Port Capabilities %#x\n",
4160 acaps, lc->pcaps);
4161 return -EINVAL;
4162 }
4163
4164 return acaps;
4165 }
4166
4167 /**
4168 * t4_link_l1cfg_core - apply link configuration to MAC/PHY
4169 * @adapter: the adapter
4170 * @mbox: the Firmware Mailbox to use
4171 * @port: the Port ID
4172 * @lc: the Port's Link Configuration
4173 * @sleep_ok: if true we may sleep while awaiting command completion
4174 * @timeout: time to wait for command to finish before timing out
4175 * (negative implies @sleep_ok=false)
4176 *
4177 * Set up a port's MAC and PHY according to a desired link configuration.
4178 * - If the PHY can auto-negotiate first decide what to advertise, then
4179 * enable/disable auto-negotiation as desired, and reset.
4180 * - If the PHY does not auto-negotiate just reset it.
4181 * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
4182 * otherwise do it later based on the outcome of auto-negotiation.
4183 */
t4_link_l1cfg_core(struct adapter * adapter,unsigned int mbox,unsigned int port,struct link_config * lc,u8 sleep_ok,int timeout)4184 int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
4185 unsigned int port, struct link_config *lc,
4186 u8 sleep_ok, int timeout)
4187 {
4188 unsigned int fw_caps = adapter->params.fw_caps_support;
4189 struct fw_port_cmd cmd;
4190 fw_port_cap32_t rcap;
4191 int ret;
4192
4193 if (!(lc->pcaps & FW_PORT_CAP32_ANEG) &&
4194 lc->autoneg == AUTONEG_ENABLE) {
4195 return -EINVAL;
4196 }
4197
4198 /* Compute our Requested Port Capabilities and send that on to the
4199 * Firmware.
4200 */
4201 rcap = t4_link_acaps(adapter, port, lc);
4202 memset(&cmd, 0, sizeof(cmd));
4203 cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
4204 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
4205 FW_PORT_CMD_PORTID_V(port));
4206 cmd.action_to_len16 =
4207 cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
4208 ? FW_PORT_ACTION_L1_CFG
4209 : FW_PORT_ACTION_L1_CFG32) |
4210 FW_LEN16(cmd));
4211 if (fw_caps == FW_CAPS16)
4212 cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
4213 else
4214 cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
4215
4216 ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL,
4217 sleep_ok, timeout);
4218
4219 /* Unfortunately, even if the Requested Port Capabilities "fit" within
4220 * the Physical Port Capabilities, some combinations of features may
4221 * still not be legal. For example, 40Gb/s and Reed-Solomon Forward
4222 * Error Correction. So if the Firmware rejects the L1 Configure
4223 * request, flag that here.
4224 */
4225 if (ret) {
4226 dev_err(adapter->pdev_dev,
4227 "Requested Port Capabilities %#x rejected, error %d\n",
4228 rcap, -ret);
4229 return ret;
4230 }
4231 return 0;
4232 }
4233
4234 /**
4235 * t4_restart_aneg - restart autonegotiation
4236 * @adap: the adapter
4237 * @mbox: mbox to use for the FW command
4238 * @port: the port id
4239 *
4240 * Restarts autonegotiation for the selected port.
4241 */
t4_restart_aneg(struct adapter * adap,unsigned int mbox,unsigned int port)4242 int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
4243 {
4244 unsigned int fw_caps = adap->params.fw_caps_support;
4245 struct fw_port_cmd c;
4246
4247 memset(&c, 0, sizeof(c));
4248 c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
4249 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
4250 FW_PORT_CMD_PORTID_V(port));
4251 c.action_to_len16 =
4252 cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
4253 ? FW_PORT_ACTION_L1_CFG
4254 : FW_PORT_ACTION_L1_CFG32) |
4255 FW_LEN16(c));
4256 if (fw_caps == FW_CAPS16)
4257 c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG);
4258 else
4259 c.u.l1cfg32.rcap32 = cpu_to_be32(FW_PORT_CAP32_ANEG);
4260 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
4261 }
4262
4263 typedef void (*int_handler_t)(struct adapter *adap);
4264
4265 struct intr_info {
4266 unsigned int mask; /* bits to check in interrupt status */
4267 const char *msg; /* message to print or NULL */
4268 short stat_idx; /* stat counter to increment or -1 */
4269 unsigned short fatal; /* whether the condition reported is fatal */
4270 int_handler_t int_handler; /* platform-specific int handler */
4271 };
4272
4273 /**
4274 * t4_handle_intr_status - table driven interrupt handler
4275 * @adapter: the adapter that generated the interrupt
4276 * @reg: the interrupt status register to process
4277 * @acts: table of interrupt actions
4278 *
4279 * A table driven interrupt handler that applies a set of masks to an
4280 * interrupt status word and performs the corresponding actions if the
4281 * interrupts described by the mask have occurred. The actions include
4282 * optionally emitting a warning or alert message. The table is terminated
4283 * by an entry specifying mask 0. Returns the number of fatal interrupt
4284 * conditions.
4285 */
t4_handle_intr_status(struct adapter * adapter,unsigned int reg,const struct intr_info * acts)4286 static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
4287 const struct intr_info *acts)
4288 {
4289 int fatal = 0;
4290 unsigned int mask = 0;
4291 unsigned int status = t4_read_reg(adapter, reg);
4292
4293 for ( ; acts->mask; ++acts) {
4294 if (!(status & acts->mask))
4295 continue;
4296 if (acts->fatal) {
4297 fatal++;
4298 dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
4299 status & acts->mask);
4300 } else if (acts->msg && printk_ratelimit())
4301 dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
4302 status & acts->mask);
4303 if (acts->int_handler)
4304 acts->int_handler(adapter);
4305 mask |= acts->mask;
4306 }
4307 status &= mask;
4308 if (status) /* clear processed interrupts */
4309 t4_write_reg(adapter, reg, status);
4310 return fatal;
4311 }
4312
4313 /*
4314 * Interrupt handler for the PCIE module.
4315 */
pcie_intr_handler(struct adapter * adapter)4316 static void pcie_intr_handler(struct adapter *adapter)
4317 {
4318 static const struct intr_info sysbus_intr_info[] = {
4319 { RNPP_F, "RXNP array parity error", -1, 1 },
4320 { RPCP_F, "RXPC array parity error", -1, 1 },
4321 { RCIP_F, "RXCIF array parity error", -1, 1 },
4322 { RCCP_F, "Rx completions control array parity error", -1, 1 },
4323 { RFTP_F, "RXFT array parity error", -1, 1 },
4324 { 0 }
4325 };
4326 static const struct intr_info pcie_port_intr_info[] = {
4327 { TPCP_F, "TXPC array parity error", -1, 1 },
4328 { TNPP_F, "TXNP array parity error", -1, 1 },
4329 { TFTP_F, "TXFT array parity error", -1, 1 },
4330 { TCAP_F, "TXCA array parity error", -1, 1 },
4331 { TCIP_F, "TXCIF array parity error", -1, 1 },
4332 { RCAP_F, "RXCA array parity error", -1, 1 },
4333 { OTDD_F, "outbound request TLP discarded", -1, 1 },
4334 { RDPE_F, "Rx data parity error", -1, 1 },
4335 { TDUE_F, "Tx uncorrectable data error", -1, 1 },
4336 { 0 }
4337 };
4338 static const struct intr_info pcie_intr_info[] = {
4339 { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 },
4340 { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 },
4341 { MSIDATAPERR_F, "MSI data parity error", -1, 1 },
4342 { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
4343 { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
4344 { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
4345 { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
4346 { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 },
4347 { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 },
4348 { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
4349 { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 },
4350 { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
4351 { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
4352 { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 },
4353 { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
4354 { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
4355 { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 },
4356 { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
4357 { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
4358 { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
4359 { FIDPERR_F, "PCI FID parity error", -1, 1 },
4360 { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 },
4361 { MATAGPERR_F, "PCI MA tag parity error", -1, 1 },
4362 { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
4363 { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 },
4364 { RXWRPERR_F, "PCI Rx write parity error", -1, 1 },
4365 { RPLPERR_F, "PCI replay buffer parity error", -1, 1 },
4366 { PCIESINT_F, "PCI core secondary fault", -1, 1 },
4367 { PCIEPINT_F, "PCI core primary fault", -1, 1 },
4368 { UNXSPLCPLERR_F, "PCI unexpected split completion error",
4369 -1, 0 },
4370 { 0 }
4371 };
4372
4373 static struct intr_info t5_pcie_intr_info[] = {
4374 { MSTGRPPERR_F, "Master Response Read Queue parity error",
4375 -1, 1 },
4376 { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 },
4377 { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 },
4378 { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
4379 { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
4380 { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
4381 { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
4382 { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error",
4383 -1, 1 },
4384 { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error",
4385 -1, 1 },
4386 { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
4387 { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 },
4388 { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
4389 { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
4390 { DREQWRPERR_F, "PCI DMA channel write request parity error",
4391 -1, 1 },
4392 { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
4393 { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
4394 { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 },
4395 { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
4396 { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
4397 { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
4398 { FIDPERR_F, "PCI FID parity error", -1, 1 },
4399 { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 },
4400 { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 },
4401 { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
4402 { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error",
4403 -1, 1 },
4404 { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error",
4405 -1, 1 },
4406 { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 },
4407 { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 },
4408 { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 },
4409 { READRSPERR_F, "Outbound read error", -1, 0 },
4410 { 0 }
4411 };
4412
4413 int fat;
4414
4415 if (is_t4(adapter->params.chip))
4416 fat = t4_handle_intr_status(adapter,
4417 PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A,
4418 sysbus_intr_info) +
4419 t4_handle_intr_status(adapter,
4420 PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A,
4421 pcie_port_intr_info) +
4422 t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
4423 pcie_intr_info);
4424 else
4425 fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
4426 t5_pcie_intr_info);
4427
4428 if (fat)
4429 t4_fatal_err(adapter);
4430 }
4431
4432 /*
4433 * TP interrupt handler.
4434 */
tp_intr_handler(struct adapter * adapter)4435 static void tp_intr_handler(struct adapter *adapter)
4436 {
4437 static const struct intr_info tp_intr_info[] = {
4438 { 0x3fffffff, "TP parity error", -1, 1 },
4439 { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 },
4440 { 0 }
4441 };
4442
4443 if (t4_handle_intr_status(adapter, TP_INT_CAUSE_A, tp_intr_info))
4444 t4_fatal_err(adapter);
4445 }
4446
4447 /*
4448 * SGE interrupt handler.
4449 */
sge_intr_handler(struct adapter * adapter)4450 static void sge_intr_handler(struct adapter *adapter)
4451 {
4452 u32 v = 0, perr;
4453 u32 err;
4454
4455 static const struct intr_info sge_intr_info[] = {
4456 { ERR_CPL_EXCEED_IQE_SIZE_F,
4457 "SGE received CPL exceeding IQE size", -1, 1 },
4458 { ERR_INVALID_CIDX_INC_F,
4459 "SGE GTS CIDX increment too large", -1, 0 },
4460 { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 },
4461 { DBFIFO_LP_INT_F, NULL, -1, 0, t4_db_full },
4462 { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F,
4463 "SGE IQID > 1023 received CPL for FL", -1, 0 },
4464 { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1,
4465 0 },
4466 { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1,
4467 0 },
4468 { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1,
4469 0 },
4470 { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1,
4471 0 },
4472 { ERR_ING_CTXT_PRIO_F,
4473 "SGE too many priority ingress contexts", -1, 0 },
4474 { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 },
4475 { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 },
4476 { 0 }
4477 };
4478
4479 static struct intr_info t4t5_sge_intr_info[] = {
4480 { ERR_DROPPED_DB_F, NULL, -1, 0, t4_db_dropped },
4481 { DBFIFO_HP_INT_F, NULL, -1, 0, t4_db_full },
4482 { ERR_EGR_CTXT_PRIO_F,
4483 "SGE too many priority egress contexts", -1, 0 },
4484 { 0 }
4485 };
4486
4487 perr = t4_read_reg(adapter, SGE_INT_CAUSE1_A);
4488 if (perr) {
4489 v |= perr;
4490 dev_alert(adapter->pdev_dev, "SGE Cause1 Parity Error %#x\n",
4491 perr);
4492 }
4493
4494 perr = t4_read_reg(adapter, SGE_INT_CAUSE2_A);
4495 if (perr) {
4496 v |= perr;
4497 dev_alert(adapter->pdev_dev, "SGE Cause2 Parity Error %#x\n",
4498 perr);
4499 }
4500
4501 if (CHELSIO_CHIP_VERSION(adapter->params.chip) >= CHELSIO_T5) {
4502 perr = t4_read_reg(adapter, SGE_INT_CAUSE5_A);
4503 /* Parity error (CRC) for err_T_RxCRC is trivial, ignore it */
4504 perr &= ~ERR_T_RXCRC_F;
4505 if (perr) {
4506 v |= perr;
4507 dev_alert(adapter->pdev_dev,
4508 "SGE Cause5 Parity Error %#x\n", perr);
4509 }
4510 }
4511
4512 v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, sge_intr_info);
4513 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
4514 v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A,
4515 t4t5_sge_intr_info);
4516
4517 err = t4_read_reg(adapter, SGE_ERROR_STATS_A);
4518 if (err & ERROR_QID_VALID_F) {
4519 dev_err(adapter->pdev_dev, "SGE error for queue %u\n",
4520 ERROR_QID_G(err));
4521 if (err & UNCAPTURED_ERROR_F)
4522 dev_err(adapter->pdev_dev,
4523 "SGE UNCAPTURED_ERROR set (clearing)\n");
4524 t4_write_reg(adapter, SGE_ERROR_STATS_A, ERROR_QID_VALID_F |
4525 UNCAPTURED_ERROR_F);
4526 }
4527
4528 if (v != 0)
4529 t4_fatal_err(adapter);
4530 }
4531
4532 #define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\
4533 OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F)
4534 #define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\
4535 IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F)
4536
4537 /*
4538 * CIM interrupt handler.
4539 */
cim_intr_handler(struct adapter * adapter)4540 static void cim_intr_handler(struct adapter *adapter)
4541 {
4542 static const struct intr_info cim_intr_info[] = {
4543 { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 },
4544 { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 },
4545 { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 },
4546 { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 },
4547 { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
4548 { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
4549 { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
4550 { TIMER0INT_F, "CIM TIMER0 interrupt", -1, 1 },
4551 { 0 }
4552 };
4553 static const struct intr_info cim_upintr_info[] = {
4554 { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 },
4555 { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 },
4556 { ILLWRINT_F, "CIM illegal write", -1, 1 },
4557 { ILLRDINT_F, "CIM illegal read", -1, 1 },
4558 { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 },
4559 { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 },
4560 { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 },
4561 { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 },
4562 { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 },
4563 { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 },
4564 { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 },
4565 { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 },
4566 { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 },
4567 { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 },
4568 { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 },
4569 { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 },
4570 { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 },
4571 { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 },
4572 { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 },
4573 { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 },
4574 { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 },
4575 { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 },
4576 { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 },
4577 { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 },
4578 { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 },
4579 { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 },
4580 { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 },
4581 { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 },
4582 { 0 }
4583 };
4584
4585 u32 val, fw_err;
4586 int fat;
4587
4588 fw_err = t4_read_reg(adapter, PCIE_FW_A);
4589 if (fw_err & PCIE_FW_ERR_F)
4590 t4_report_fw_error(adapter);
4591
4592 /* When the Firmware detects an internal error which normally
4593 * wouldn't raise a Host Interrupt, it forces a CIM Timer0 interrupt
4594 * in order to make sure the Host sees the Firmware Crash. So
4595 * if we have a Timer0 interrupt and don't see a Firmware Crash,
4596 * ignore the Timer0 interrupt.
4597 */
4598
4599 val = t4_read_reg(adapter, CIM_HOST_INT_CAUSE_A);
4600 if (val & TIMER0INT_F)
4601 if (!(fw_err & PCIE_FW_ERR_F) ||
4602 (PCIE_FW_EVAL_G(fw_err) != PCIE_FW_EVAL_CRASH))
4603 t4_write_reg(adapter, CIM_HOST_INT_CAUSE_A,
4604 TIMER0INT_F);
4605
4606 fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A,
4607 cim_intr_info) +
4608 t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A,
4609 cim_upintr_info);
4610 if (fat)
4611 t4_fatal_err(adapter);
4612 }
4613
4614 /*
4615 * ULP RX interrupt handler.
4616 */
ulprx_intr_handler(struct adapter * adapter)4617 static void ulprx_intr_handler(struct adapter *adapter)
4618 {
4619 static const struct intr_info ulprx_intr_info[] = {
4620 { 0x1800000, "ULPRX context error", -1, 1 },
4621 { 0x7fffff, "ULPRX parity error", -1, 1 },
4622 { 0 }
4623 };
4624
4625 if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE_A, ulprx_intr_info))
4626 t4_fatal_err(adapter);
4627 }
4628
4629 /*
4630 * ULP TX interrupt handler.
4631 */
ulptx_intr_handler(struct adapter * adapter)4632 static void ulptx_intr_handler(struct adapter *adapter)
4633 {
4634 static const struct intr_info ulptx_intr_info[] = {
4635 { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1,
4636 0 },
4637 { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1,
4638 0 },
4639 { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1,
4640 0 },
4641 { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1,
4642 0 },
4643 { 0xfffffff, "ULPTX parity error", -1, 1 },
4644 { 0 }
4645 };
4646
4647 if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE_A, ulptx_intr_info))
4648 t4_fatal_err(adapter);
4649 }
4650
4651 /*
4652 * PM TX interrupt handler.
4653 */
pmtx_intr_handler(struct adapter * adapter)4654 static void pmtx_intr_handler(struct adapter *adapter)
4655 {
4656 static const struct intr_info pmtx_intr_info[] = {
4657 { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 },
4658 { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 },
4659 { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 },
4660 { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 },
4661 { PMTX_FRAMING_ERROR_F, "PMTX framing error", -1, 1 },
4662 { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 },
4663 { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error",
4664 -1, 1 },
4665 { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 },
4666 { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1},
4667 { 0 }
4668 };
4669
4670 if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE_A, pmtx_intr_info))
4671 t4_fatal_err(adapter);
4672 }
4673
4674 /*
4675 * PM RX interrupt handler.
4676 */
pmrx_intr_handler(struct adapter * adapter)4677 static void pmrx_intr_handler(struct adapter *adapter)
4678 {
4679 static const struct intr_info pmrx_intr_info[] = {
4680 { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 },
4681 { PMRX_FRAMING_ERROR_F, "PMRX framing error", -1, 1 },
4682 { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 },
4683 { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error",
4684 -1, 1 },
4685 { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 },
4686 { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1},
4687 { 0 }
4688 };
4689
4690 if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE_A, pmrx_intr_info))
4691 t4_fatal_err(adapter);
4692 }
4693
4694 /*
4695 * CPL switch interrupt handler.
4696 */
cplsw_intr_handler(struct adapter * adapter)4697 static void cplsw_intr_handler(struct adapter *adapter)
4698 {
4699 static const struct intr_info cplsw_intr_info[] = {
4700 { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 },
4701 { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 },
4702 { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 },
4703 { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 },
4704 { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 },
4705 { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 },
4706 { 0 }
4707 };
4708
4709 if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE_A, cplsw_intr_info))
4710 t4_fatal_err(adapter);
4711 }
4712
4713 /*
4714 * LE interrupt handler.
4715 */
le_intr_handler(struct adapter * adap)4716 static void le_intr_handler(struct adapter *adap)
4717 {
4718 enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip);
4719 static const struct intr_info le_intr_info[] = {
4720 { LIPMISS_F, "LE LIP miss", -1, 0 },
4721 { LIP0_F, "LE 0 LIP error", -1, 0 },
4722 { PARITYERR_F, "LE parity error", -1, 1 },
4723 { UNKNOWNCMD_F, "LE unknown command", -1, 1 },
4724 { REQQPARERR_F, "LE request queue parity error", -1, 1 },
4725 { 0 }
4726 };
4727
4728 static struct intr_info t6_le_intr_info[] = {
4729 { T6_LIPMISS_F, "LE LIP miss", -1, 0 },
4730 { T6_LIP0_F, "LE 0 LIP error", -1, 0 },
4731 { CMDTIDERR_F, "LE cmd tid error", -1, 1 },
4732 { TCAMINTPERR_F, "LE parity error", -1, 1 },
4733 { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 },
4734 { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 },
4735 { HASHTBLMEMCRCERR_F, "LE hash table mem crc error", -1, 0 },
4736 { 0 }
4737 };
4738
4739 if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE_A,
4740 (chip <= CHELSIO_T5) ?
4741 le_intr_info : t6_le_intr_info))
4742 t4_fatal_err(adap);
4743 }
4744
4745 /*
4746 * MPS interrupt handler.
4747 */
mps_intr_handler(struct adapter * adapter)4748 static void mps_intr_handler(struct adapter *adapter)
4749 {
4750 static const struct intr_info mps_rx_intr_info[] = {
4751 { 0xffffff, "MPS Rx parity error", -1, 1 },
4752 { 0 }
4753 };
4754 static const struct intr_info mps_tx_intr_info[] = {
4755 { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
4756 { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
4757 { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
4758 -1, 1 },
4759 { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
4760 -1, 1 },
4761 { BUBBLE_F, "MPS Tx underflow", -1, 1 },
4762 { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
4763 { FRMERR_F, "MPS Tx framing error", -1, 1 },
4764 { 0 }
4765 };
4766 static const struct intr_info t6_mps_tx_intr_info[] = {
4767 { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
4768 { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
4769 { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
4770 -1, 1 },
4771 { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
4772 -1, 1 },
4773 /* MPS Tx Bubble is normal for T6 */
4774 { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
4775 { FRMERR_F, "MPS Tx framing error", -1, 1 },
4776 { 0 }
4777 };
4778 static const struct intr_info mps_trc_intr_info[] = {
4779 { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 },
4780 { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error",
4781 -1, 1 },
4782 { MISCPERR_F, "MPS TRC misc parity error", -1, 1 },
4783 { 0 }
4784 };
4785 static const struct intr_info mps_stat_sram_intr_info[] = {
4786 { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
4787 { 0 }
4788 };
4789 static const struct intr_info mps_stat_tx_intr_info[] = {
4790 { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
4791 { 0 }
4792 };
4793 static const struct intr_info mps_stat_rx_intr_info[] = {
4794 { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
4795 { 0 }
4796 };
4797 static const struct intr_info mps_cls_intr_info[] = {
4798 { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 },
4799 { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 },
4800 { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 },
4801 { 0 }
4802 };
4803
4804 int fat;
4805
4806 fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE_A,
4807 mps_rx_intr_info) +
4808 t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE_A,
4809 is_t6(adapter->params.chip)
4810 ? t6_mps_tx_intr_info
4811 : mps_tx_intr_info) +
4812 t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE_A,
4813 mps_trc_intr_info) +
4814 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM_A,
4815 mps_stat_sram_intr_info) +
4816 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A,
4817 mps_stat_tx_intr_info) +
4818 t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A,
4819 mps_stat_rx_intr_info) +
4820 t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE_A,
4821 mps_cls_intr_info);
4822
4823 t4_write_reg(adapter, MPS_INT_CAUSE_A, 0);
4824 t4_read_reg(adapter, MPS_INT_CAUSE_A); /* flush */
4825 if (fat)
4826 t4_fatal_err(adapter);
4827 }
4828
4829 #define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \
4830 ECC_UE_INT_CAUSE_F)
4831
4832 /*
4833 * EDC/MC interrupt handler.
4834 */
mem_intr_handler(struct adapter * adapter,int idx)4835 static void mem_intr_handler(struct adapter *adapter, int idx)
4836 {
4837 static const char name[4][7] = { "EDC0", "EDC1", "MC/MC0", "MC1" };
4838
4839 unsigned int addr, cnt_addr, v;
4840
4841 if (idx <= MEM_EDC1) {
4842 addr = EDC_REG(EDC_INT_CAUSE_A, idx);
4843 cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx);
4844 } else if (idx == MEM_MC) {
4845 if (is_t4(adapter->params.chip)) {
4846 addr = MC_INT_CAUSE_A;
4847 cnt_addr = MC_ECC_STATUS_A;
4848 } else {
4849 addr = MC_P_INT_CAUSE_A;
4850 cnt_addr = MC_P_ECC_STATUS_A;
4851 }
4852 } else {
4853 addr = MC_REG(MC_P_INT_CAUSE_A, 1);
4854 cnt_addr = MC_REG(MC_P_ECC_STATUS_A, 1);
4855 }
4856
4857 v = t4_read_reg(adapter, addr) & MEM_INT_MASK;
4858 if (v & PERR_INT_CAUSE_F)
4859 dev_alert(adapter->pdev_dev, "%s FIFO parity error\n",
4860 name[idx]);
4861 if (v & ECC_CE_INT_CAUSE_F) {
4862 u32 cnt = ECC_CECNT_G(t4_read_reg(adapter, cnt_addr));
4863
4864 t4_edc_err_read(adapter, idx);
4865
4866 t4_write_reg(adapter, cnt_addr, ECC_CECNT_V(ECC_CECNT_M));
4867 if (printk_ratelimit())
4868 dev_warn(adapter->pdev_dev,
4869 "%u %s correctable ECC data error%s\n",
4870 cnt, name[idx], cnt > 1 ? "s" : "");
4871 }
4872 if (v & ECC_UE_INT_CAUSE_F)
4873 dev_alert(adapter->pdev_dev,
4874 "%s uncorrectable ECC data error\n", name[idx]);
4875
4876 t4_write_reg(adapter, addr, v);
4877 if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F))
4878 t4_fatal_err(adapter);
4879 }
4880
4881 /*
4882 * MA interrupt handler.
4883 */
ma_intr_handler(struct adapter * adap)4884 static void ma_intr_handler(struct adapter *adap)
4885 {
4886 u32 v, status = t4_read_reg(adap, MA_INT_CAUSE_A);
4887
4888 if (status & MEM_PERR_INT_CAUSE_F) {
4889 dev_alert(adap->pdev_dev,
4890 "MA parity error, parity status %#x\n",
4891 t4_read_reg(adap, MA_PARITY_ERROR_STATUS1_A));
4892 if (is_t5(adap->params.chip))
4893 dev_alert(adap->pdev_dev,
4894 "MA parity error, parity status %#x\n",
4895 t4_read_reg(adap,
4896 MA_PARITY_ERROR_STATUS2_A));
4897 }
4898 if (status & MEM_WRAP_INT_CAUSE_F) {
4899 v = t4_read_reg(adap, MA_INT_WRAP_STATUS_A);
4900 dev_alert(adap->pdev_dev, "MA address wrap-around error by "
4901 "client %u to address %#x\n",
4902 MEM_WRAP_CLIENT_NUM_G(v),
4903 MEM_WRAP_ADDRESS_G(v) << 4);
4904 }
4905 t4_write_reg(adap, MA_INT_CAUSE_A, status);
4906 t4_fatal_err(adap);
4907 }
4908
4909 /*
4910 * SMB interrupt handler.
4911 */
smb_intr_handler(struct adapter * adap)4912 static void smb_intr_handler(struct adapter *adap)
4913 {
4914 static const struct intr_info smb_intr_info[] = {
4915 { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 },
4916 { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 },
4917 { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 },
4918 { 0 }
4919 };
4920
4921 if (t4_handle_intr_status(adap, SMB_INT_CAUSE_A, smb_intr_info))
4922 t4_fatal_err(adap);
4923 }
4924
4925 /*
4926 * NC-SI interrupt handler.
4927 */
ncsi_intr_handler(struct adapter * adap)4928 static void ncsi_intr_handler(struct adapter *adap)
4929 {
4930 static const struct intr_info ncsi_intr_info[] = {
4931 { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 },
4932 { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 },
4933 { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 },
4934 { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 },
4935 { 0 }
4936 };
4937
4938 if (t4_handle_intr_status(adap, NCSI_INT_CAUSE_A, ncsi_intr_info))
4939 t4_fatal_err(adap);
4940 }
4941
4942 /*
4943 * XGMAC interrupt handler.
4944 */
xgmac_intr_handler(struct adapter * adap,int port)4945 static void xgmac_intr_handler(struct adapter *adap, int port)
4946 {
4947 u32 v, int_cause_reg;
4948
4949 if (is_t4(adap->params.chip))
4950 int_cause_reg = PORT_REG(port, XGMAC_PORT_INT_CAUSE_A);
4951 else
4952 int_cause_reg = T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A);
4953
4954 v = t4_read_reg(adap, int_cause_reg);
4955
4956 v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F;
4957 if (!v)
4958 return;
4959
4960 if (v & TXFIFO_PRTY_ERR_F)
4961 dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n",
4962 port);
4963 if (v & RXFIFO_PRTY_ERR_F)
4964 dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n",
4965 port);
4966 t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE_A), v);
4967 t4_fatal_err(adap);
4968 }
4969
4970 /*
4971 * PL interrupt handler.
4972 */
pl_intr_handler(struct adapter * adap)4973 static void pl_intr_handler(struct adapter *adap)
4974 {
4975 static const struct intr_info pl_intr_info[] = {
4976 { FATALPERR_F, "T4 fatal parity error", -1, 1 },
4977 { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 },
4978 { 0 }
4979 };
4980
4981 if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE_A, pl_intr_info))
4982 t4_fatal_err(adap);
4983 }
4984
4985 #define PF_INTR_MASK (PFSW_F)
4986 #define GLBL_INTR_MASK (CIM_F | MPS_F | PL_F | PCIE_F | MC_F | EDC0_F | \
4987 EDC1_F | LE_F | TP_F | MA_F | PM_TX_F | PM_RX_F | ULP_RX_F | \
4988 CPL_SWITCH_F | SGE_F | ULP_TX_F | SF_F)
4989
4990 /**
4991 * t4_slow_intr_handler - control path interrupt handler
4992 * @adapter: the adapter
4993 *
4994 * T4 interrupt handler for non-data global interrupt events, e.g., errors.
4995 * The designation 'slow' is because it involves register reads, while
4996 * data interrupts typically don't involve any MMIOs.
4997 */
t4_slow_intr_handler(struct adapter * adapter)4998 int t4_slow_intr_handler(struct adapter *adapter)
4999 {
5000 /* There are rare cases where a PL_INT_CAUSE bit may end up getting
5001 * set when the corresponding PL_INT_ENABLE bit isn't set. It's
5002 * easiest just to mask that case here.
5003 */
5004 u32 raw_cause = t4_read_reg(adapter, PL_INT_CAUSE_A);
5005 u32 enable = t4_read_reg(adapter, PL_INT_ENABLE_A);
5006 u32 cause = raw_cause & enable;
5007
5008 if (!(cause & GLBL_INTR_MASK))
5009 return 0;
5010 if (cause & CIM_F)
5011 cim_intr_handler(adapter);
5012 if (cause & MPS_F)
5013 mps_intr_handler(adapter);
5014 if (cause & NCSI_F)
5015 ncsi_intr_handler(adapter);
5016 if (cause & PL_F)
5017 pl_intr_handler(adapter);
5018 if (cause & SMB_F)
5019 smb_intr_handler(adapter);
5020 if (cause & XGMAC0_F)
5021 xgmac_intr_handler(adapter, 0);
5022 if (cause & XGMAC1_F)
5023 xgmac_intr_handler(adapter, 1);
5024 if (cause & XGMAC_KR0_F)
5025 xgmac_intr_handler(adapter, 2);
5026 if (cause & XGMAC_KR1_F)
5027 xgmac_intr_handler(adapter, 3);
5028 if (cause & PCIE_F)
5029 pcie_intr_handler(adapter);
5030 if (cause & MC_F)
5031 mem_intr_handler(adapter, MEM_MC);
5032 if (is_t5(adapter->params.chip) && (cause & MC1_F))
5033 mem_intr_handler(adapter, MEM_MC1);
5034 if (cause & EDC0_F)
5035 mem_intr_handler(adapter, MEM_EDC0);
5036 if (cause & EDC1_F)
5037 mem_intr_handler(adapter, MEM_EDC1);
5038 if (cause & LE_F)
5039 le_intr_handler(adapter);
5040 if (cause & TP_F)
5041 tp_intr_handler(adapter);
5042 if (cause & MA_F)
5043 ma_intr_handler(adapter);
5044 if (cause & PM_TX_F)
5045 pmtx_intr_handler(adapter);
5046 if (cause & PM_RX_F)
5047 pmrx_intr_handler(adapter);
5048 if (cause & ULP_RX_F)
5049 ulprx_intr_handler(adapter);
5050 if (cause & CPL_SWITCH_F)
5051 cplsw_intr_handler(adapter);
5052 if (cause & SGE_F)
5053 sge_intr_handler(adapter);
5054 if (cause & ULP_TX_F)
5055 ulptx_intr_handler(adapter);
5056
5057 /* Clear the interrupts just processed for which we are the master. */
5058 t4_write_reg(adapter, PL_INT_CAUSE_A, raw_cause & GLBL_INTR_MASK);
5059 (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */
5060 return 1;
5061 }
5062
5063 /**
5064 * t4_intr_enable - enable interrupts
5065 * @adapter: the adapter whose interrupts should be enabled
5066 *
5067 * Enable PF-specific interrupts for the calling function and the top-level
5068 * interrupt concentrator for global interrupts. Interrupts are already
5069 * enabled at each module, here we just enable the roots of the interrupt
5070 * hierarchies.
5071 *
5072 * Note: this function should be called only when the driver manages
5073 * non PF-specific interrupts from the various HW modules. Only one PCI
5074 * function at a time should be doing this.
5075 */
t4_intr_enable(struct adapter * adapter)5076 void t4_intr_enable(struct adapter *adapter)
5077 {
5078 u32 val = 0;
5079 u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A);
5080 u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
5081 SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
5082
5083 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
5084 val = ERR_DROPPED_DB_F | ERR_EGR_CTXT_PRIO_F | DBFIFO_HP_INT_F;
5085 t4_write_reg(adapter, SGE_INT_ENABLE3_A, ERR_CPL_EXCEED_IQE_SIZE_F |
5086 ERR_INVALID_CIDX_INC_F | ERR_CPL_OPCODE_0_F |
5087 ERR_DATA_CPL_ON_HIGH_QID1_F | INGRESS_SIZE_ERR_F |
5088 ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F |
5089 ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F |
5090 ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F |
5091 DBFIFO_LP_INT_F | EGRESS_SIZE_ERR_F | val);
5092 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), PF_INTR_MASK);
5093 t4_set_reg_field(adapter, PL_INT_MAP0_A, 0, 1 << pf);
5094 }
5095
5096 /**
5097 * t4_intr_disable - disable interrupts
5098 * @adapter: the adapter whose interrupts should be disabled
5099 *
5100 * Disable interrupts. We only disable the top-level interrupt
5101 * concentrators. The caller must be a PCI function managing global
5102 * interrupts.
5103 */
t4_intr_disable(struct adapter * adapter)5104 void t4_intr_disable(struct adapter *adapter)
5105 {
5106 u32 whoami, pf;
5107
5108 if (pci_channel_offline(adapter->pdev))
5109 return;
5110
5111 whoami = t4_read_reg(adapter, PL_WHOAMI_A);
5112 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
5113 SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);
5114
5115 t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0);
5116 t4_set_reg_field(adapter, PL_INT_MAP0_A, 1 << pf, 0);
5117 }
5118
t4_chip_rss_size(struct adapter * adap)5119 unsigned int t4_chip_rss_size(struct adapter *adap)
5120 {
5121 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
5122 return RSS_NENTRIES;
5123 else
5124 return T6_RSS_NENTRIES;
5125 }
5126
5127 /**
5128 * t4_config_rss_range - configure a portion of the RSS mapping table
5129 * @adapter: the adapter
5130 * @mbox: mbox to use for the FW command
5131 * @viid: virtual interface whose RSS subtable is to be written
5132 * @start: start entry in the table to write
5133 * @n: how many table entries to write
5134 * @rspq: values for the response queue lookup table
5135 * @nrspq: number of values in @rspq
5136 *
5137 * Programs the selected part of the VI's RSS mapping table with the
5138 * provided values. If @nrspq < @n the supplied values are used repeatedly
5139 * until the full table range is populated.
5140 *
5141 * The caller must ensure the values in @rspq are in the range allowed for
5142 * @viid.
5143 */
t4_config_rss_range(struct adapter * adapter,int mbox,unsigned int viid,int start,int n,const u16 * rspq,unsigned int nrspq)5144 int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
5145 int start, int n, const u16 *rspq, unsigned int nrspq)
5146 {
5147 int ret;
5148 const u16 *rsp = rspq;
5149 const u16 *rsp_end = rspq + nrspq;
5150 struct fw_rss_ind_tbl_cmd cmd;
5151
5152 memset(&cmd, 0, sizeof(cmd));
5153 cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) |
5154 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
5155 FW_RSS_IND_TBL_CMD_VIID_V(viid));
5156 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
5157
5158 /* each fw_rss_ind_tbl_cmd takes up to 32 entries */
5159 while (n > 0) {
5160 int nq = min(n, 32);
5161 __be32 *qp = &cmd.iq0_to_iq2;
5162
5163 cmd.niqid = cpu_to_be16(nq);
5164 cmd.startidx = cpu_to_be16(start);
5165
5166 start += nq;
5167 n -= nq;
5168
5169 while (nq > 0) {
5170 unsigned int v;
5171
5172 v = FW_RSS_IND_TBL_CMD_IQ0_V(*rsp);
5173 if (++rsp >= rsp_end)
5174 rsp = rspq;
5175 v |= FW_RSS_IND_TBL_CMD_IQ1_V(*rsp);
5176 if (++rsp >= rsp_end)
5177 rsp = rspq;
5178 v |= FW_RSS_IND_TBL_CMD_IQ2_V(*rsp);
5179 if (++rsp >= rsp_end)
5180 rsp = rspq;
5181
5182 *qp++ = cpu_to_be32(v);
5183 nq -= 3;
5184 }
5185
5186 ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
5187 if (ret)
5188 return ret;
5189 }
5190 return 0;
5191 }
5192
5193 /**
5194 * t4_config_glbl_rss - configure the global RSS mode
5195 * @adapter: the adapter
5196 * @mbox: mbox to use for the FW command
5197 * @mode: global RSS mode
5198 * @flags: mode-specific flags
5199 *
5200 * Sets the global RSS mode.
5201 */
t4_config_glbl_rss(struct adapter * adapter,int mbox,unsigned int mode,unsigned int flags)5202 int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
5203 unsigned int flags)
5204 {
5205 struct fw_rss_glb_config_cmd c;
5206
5207 memset(&c, 0, sizeof(c));
5208 c.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) |
5209 FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
5210 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
5211 if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
5212 c.u.manual.mode_pkd =
5213 cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
5214 } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
5215 c.u.basicvirtual.mode_pkd =
5216 cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
5217 c.u.basicvirtual.synmapen_to_hashtoeplitz = cpu_to_be32(flags);
5218 } else
5219 return -EINVAL;
5220 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
5221 }
5222
5223 /**
5224 * t4_config_vi_rss - configure per VI RSS settings
5225 * @adapter: the adapter
5226 * @mbox: mbox to use for the FW command
5227 * @viid: the VI id
5228 * @flags: RSS flags
5229 * @defq: id of the default RSS queue for the VI.
5230 *
5231 * Configures VI-specific RSS properties.
5232 */
t4_config_vi_rss(struct adapter * adapter,int mbox,unsigned int viid,unsigned int flags,unsigned int defq)5233 int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
5234 unsigned int flags, unsigned int defq)
5235 {
5236 struct fw_rss_vi_config_cmd c;
5237
5238 memset(&c, 0, sizeof(c));
5239 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
5240 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
5241 FW_RSS_VI_CONFIG_CMD_VIID_V(viid));
5242 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
5243 c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
5244 FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V(defq));
5245 return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
5246 }
5247
5248 /* Read an RSS table row */
rd_rss_row(struct adapter * adap,int row,u32 * val)5249 static int rd_rss_row(struct adapter *adap, int row, u32 *val)
5250 {
5251 t4_write_reg(adap, TP_RSS_LKP_TABLE_A, 0xfff00000 | row);
5252 return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE_A, LKPTBLROWVLD_F, 1,
5253 5, 0, val);
5254 }
5255
5256 /**
5257 * t4_read_rss - read the contents of the RSS mapping table
5258 * @adapter: the adapter
5259 * @map: holds the contents of the RSS mapping table
5260 *
5261 * Reads the contents of the RSS hash->queue mapping table.
5262 */
t4_read_rss(struct adapter * adapter,u16 * map)5263 int t4_read_rss(struct adapter *adapter, u16 *map)
5264 {
5265 int i, ret, nentries;
5266 u32 val;
5267
5268 nentries = t4_chip_rss_size(adapter);
5269 for (i = 0; i < nentries / 2; ++i) {
5270 ret = rd_rss_row(adapter, i, &val);
5271 if (ret)
5272 return ret;
5273 *map++ = LKPTBLQUEUE0_G(val);
5274 *map++ = LKPTBLQUEUE1_G(val);
5275 }
5276 return 0;
5277 }
5278
t4_use_ldst(struct adapter * adap)5279 static unsigned int t4_use_ldst(struct adapter *adap)
5280 {
5281 return (adap->flags & CXGB4_FW_OK) && !adap->use_bd;
5282 }
5283
5284 /**
5285 * t4_tp_fw_ldst_rw - Access TP indirect register through LDST
5286 * @adap: the adapter
5287 * @cmd: TP fw ldst address space type
5288 * @vals: where the indirect register values are stored/written
5289 * @nregs: how many indirect registers to read/write
5290 * @start_index: index of first indirect register to read/write
5291 * @rw: Read (1) or Write (0)
5292 * @sleep_ok: if true we may sleep while awaiting command completion
5293 *
5294 * Access TP indirect registers through LDST
5295 */
t4_tp_fw_ldst_rw(struct adapter * adap,int cmd,u32 * vals,unsigned int nregs,unsigned int start_index,unsigned int rw,bool sleep_ok)5296 static int t4_tp_fw_ldst_rw(struct adapter *adap, int cmd, u32 *vals,
5297 unsigned int nregs, unsigned int start_index,
5298 unsigned int rw, bool sleep_ok)
5299 {
5300 int ret = 0;
5301 unsigned int i;
5302 struct fw_ldst_cmd c;
5303
5304 for (i = 0; i < nregs; i++) {
5305 memset(&c, 0, sizeof(c));
5306 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
5307 FW_CMD_REQUEST_F |
5308 (rw ? FW_CMD_READ_F :
5309 FW_CMD_WRITE_F) |
5310 FW_LDST_CMD_ADDRSPACE_V(cmd));
5311 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
5312
5313 c.u.addrval.addr = cpu_to_be32(start_index + i);
5314 c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]);
5315 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c,
5316 sleep_ok);
5317 if (ret)
5318 return ret;
5319
5320 if (rw)
5321 vals[i] = be32_to_cpu(c.u.addrval.val);
5322 }
5323 return 0;
5324 }
5325
5326 /**
5327 * t4_tp_indirect_rw - Read/Write TP indirect register through LDST or backdoor
5328 * @adap: the adapter
5329 * @reg_addr: Address Register
5330 * @reg_data: Data register
5331 * @buff: where the indirect register values are stored/written
5332 * @nregs: how many indirect registers to read/write
5333 * @start_index: index of first indirect register to read/write
5334 * @rw: READ(1) or WRITE(0)
5335 * @sleep_ok: if true we may sleep while awaiting command completion
5336 *
5337 * Read/Write TP indirect registers through LDST if possible.
5338 * Else, use backdoor access
5339 **/
t4_tp_indirect_rw(struct adapter * adap,u32 reg_addr,u32 reg_data,u32 * buff,u32 nregs,u32 start_index,int rw,bool sleep_ok)5340 static void t4_tp_indirect_rw(struct adapter *adap, u32 reg_addr, u32 reg_data,
5341 u32 *buff, u32 nregs, u32 start_index, int rw,
5342 bool sleep_ok)
5343 {
5344 int rc = -EINVAL;
5345 int cmd;
5346
5347 switch (reg_addr) {
5348 case TP_PIO_ADDR_A:
5349 cmd = FW_LDST_ADDRSPC_TP_PIO;
5350 break;
5351 case TP_TM_PIO_ADDR_A:
5352 cmd = FW_LDST_ADDRSPC_TP_TM_PIO;
5353 break;
5354 case TP_MIB_INDEX_A:
5355 cmd = FW_LDST_ADDRSPC_TP_MIB;
5356 break;
5357 default:
5358 goto indirect_access;
5359 }
5360
5361 if (t4_use_ldst(adap))
5362 rc = t4_tp_fw_ldst_rw(adap, cmd, buff, nregs, start_index, rw,
5363 sleep_ok);
5364
5365 indirect_access:
5366
5367 if (rc) {
5368 if (rw)
5369 t4_read_indirect(adap, reg_addr, reg_data, buff, nregs,
5370 start_index);
5371 else
5372 t4_write_indirect(adap, reg_addr, reg_data, buff, nregs,
5373 start_index);
5374 }
5375 }
5376
5377 /**
5378 * t4_tp_pio_read - Read TP PIO registers
5379 * @adap: the adapter
5380 * @buff: where the indirect register values are written
5381 * @nregs: how many indirect registers to read
5382 * @start_index: index of first indirect register to read
5383 * @sleep_ok: if true we may sleep while awaiting command completion
5384 *
5385 * Read TP PIO Registers
5386 **/
t4_tp_pio_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5387 void t4_tp_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
5388 u32 start_index, bool sleep_ok)
5389 {
5390 t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
5391 start_index, 1, sleep_ok);
5392 }
5393
5394 /**
5395 * t4_tp_pio_write - Write TP PIO registers
5396 * @adap: the adapter
5397 * @buff: where the indirect register values are stored
5398 * @nregs: how many indirect registers to write
5399 * @start_index: index of first indirect register to write
5400 * @sleep_ok: if true we may sleep while awaiting command completion
5401 *
5402 * Write TP PIO Registers
5403 **/
t4_tp_pio_write(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5404 static void t4_tp_pio_write(struct adapter *adap, u32 *buff, u32 nregs,
5405 u32 start_index, bool sleep_ok)
5406 {
5407 t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
5408 start_index, 0, sleep_ok);
5409 }
5410
5411 /**
5412 * t4_tp_tm_pio_read - Read TP TM PIO registers
5413 * @adap: the adapter
5414 * @buff: where the indirect register values are written
5415 * @nregs: how many indirect registers to read
5416 * @start_index: index of first indirect register to read
5417 * @sleep_ok: if true we may sleep while awaiting command completion
5418 *
5419 * Read TP TM PIO Registers
5420 **/
t4_tp_tm_pio_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5421 void t4_tp_tm_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
5422 u32 start_index, bool sleep_ok)
5423 {
5424 t4_tp_indirect_rw(adap, TP_TM_PIO_ADDR_A, TP_TM_PIO_DATA_A, buff,
5425 nregs, start_index, 1, sleep_ok);
5426 }
5427
5428 /**
5429 * t4_tp_mib_read - Read TP MIB registers
5430 * @adap: the adapter
5431 * @buff: where the indirect register values are written
5432 * @nregs: how many indirect registers to read
5433 * @start_index: index of first indirect register to read
5434 * @sleep_ok: if true we may sleep while awaiting command completion
5435 *
5436 * Read TP MIB Registers
5437 **/
t4_tp_mib_read(struct adapter * adap,u32 * buff,u32 nregs,u32 start_index,bool sleep_ok)5438 void t4_tp_mib_read(struct adapter *adap, u32 *buff, u32 nregs, u32 start_index,
5439 bool sleep_ok)
5440 {
5441 t4_tp_indirect_rw(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, buff, nregs,
5442 start_index, 1, sleep_ok);
5443 }
5444
5445 /**
5446 * t4_read_rss_key - read the global RSS key
5447 * @adap: the adapter
5448 * @key: 10-entry array holding the 320-bit RSS key
5449 * @sleep_ok: if true we may sleep while awaiting command completion
5450 *
5451 * Reads the global 320-bit RSS key.
5452 */
t4_read_rss_key(struct adapter * adap,u32 * key,bool sleep_ok)5453 void t4_read_rss_key(struct adapter *adap, u32 *key, bool sleep_ok)
5454 {
5455 t4_tp_pio_read(adap, key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);
5456 }
5457
5458 /**
5459 * t4_write_rss_key - program one of the RSS keys
5460 * @adap: the adapter
5461 * @key: 10-entry array holding the 320-bit RSS key
5462 * @idx: which RSS key to write
5463 * @sleep_ok: if true we may sleep while awaiting command completion
5464 *
5465 * Writes one of the RSS keys with the given 320-bit value. If @idx is
5466 * 0..15 the corresponding entry in the RSS key table is written,
5467 * otherwise the global RSS key is written.
5468 */
t4_write_rss_key(struct adapter * adap,const u32 * key,int idx,bool sleep_ok)5469 void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx,
5470 bool sleep_ok)
5471 {
5472 u8 rss_key_addr_cnt = 16;
5473 u32 vrt = t4_read_reg(adap, TP_RSS_CONFIG_VRT_A);
5474
5475 /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble),
5476 * allows access to key addresses 16-63 by using KeyWrAddrX
5477 * as index[5:4](upper 2) into key table
5478 */
5479 if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) &&
5480 (vrt & KEYEXTEND_F) && (KEYMODE_G(vrt) == 3))
5481 rss_key_addr_cnt = 32;
5482
5483 t4_tp_pio_write(adap, (void *)key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);
5484
5485 if (idx >= 0 && idx < rss_key_addr_cnt) {
5486 if (rss_key_addr_cnt > 16)
5487 t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
5488 KEYWRADDRX_V(idx >> 4) |
5489 T6_VFWRADDR_V(idx) | KEYWREN_F);
5490 else
5491 t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
5492 KEYWRADDR_V(idx) | KEYWREN_F);
5493 }
5494 }
5495
5496 /**
5497 * t4_read_rss_pf_config - read PF RSS Configuration Table
5498 * @adapter: the adapter
5499 * @index: the entry in the PF RSS table to read
5500 * @valp: where to store the returned value
5501 * @sleep_ok: if true we may sleep while awaiting command completion
5502 *
5503 * Reads the PF RSS Configuration Table at the specified index and returns
5504 * the value found there.
5505 */
t4_read_rss_pf_config(struct adapter * adapter,unsigned int index,u32 * valp,bool sleep_ok)5506 void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index,
5507 u32 *valp, bool sleep_ok)
5508 {
5509 t4_tp_pio_read(adapter, valp, 1, TP_RSS_PF0_CONFIG_A + index, sleep_ok);
5510 }
5511
5512 /**
5513 * t4_read_rss_vf_config - read VF RSS Configuration Table
5514 * @adapter: the adapter
5515 * @index: the entry in the VF RSS table to read
5516 * @vfl: where to store the returned VFL
5517 * @vfh: where to store the returned VFH
5518 * @sleep_ok: if true we may sleep while awaiting command completion
5519 *
5520 * Reads the VF RSS Configuration Table at the specified index and returns
5521 * the (VFL, VFH) values found there.
5522 */
t4_read_rss_vf_config(struct adapter * adapter,unsigned int index,u32 * vfl,u32 * vfh,bool sleep_ok)5523 void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index,
5524 u32 *vfl, u32 *vfh, bool sleep_ok)
5525 {
5526 u32 vrt, mask, data;
5527
5528 if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) {
5529 mask = VFWRADDR_V(VFWRADDR_M);
5530 data = VFWRADDR_V(index);
5531 } else {
5532 mask = T6_VFWRADDR_V(T6_VFWRADDR_M);
5533 data = T6_VFWRADDR_V(index);
5534 }
5535
5536 /* Request that the index'th VF Table values be read into VFL/VFH.
5537 */
5538 vrt = t4_read_reg(adapter, TP_RSS_CONFIG_VRT_A);
5539 vrt &= ~(VFRDRG_F | VFWREN_F | KEYWREN_F | mask);
5540 vrt |= data | VFRDEN_F;
5541 t4_write_reg(adapter, TP_RSS_CONFIG_VRT_A, vrt);
5542
5543 /* Grab the VFL/VFH values ...
5544 */
5545 t4_tp_pio_read(adapter, vfl, 1, TP_RSS_VFL_CONFIG_A, sleep_ok);
5546 t4_tp_pio_read(adapter, vfh, 1, TP_RSS_VFH_CONFIG_A, sleep_ok);
5547 }
5548
5549 /**
5550 * t4_read_rss_pf_map - read PF RSS Map
5551 * @adapter: the adapter
5552 * @sleep_ok: if true we may sleep while awaiting command completion
5553 *
5554 * Reads the PF RSS Map register and returns its value.
5555 */
t4_read_rss_pf_map(struct adapter * adapter,bool sleep_ok)5556 u32 t4_read_rss_pf_map(struct adapter *adapter, bool sleep_ok)
5557 {
5558 u32 pfmap;
5559
5560 t4_tp_pio_read(adapter, &pfmap, 1, TP_RSS_PF_MAP_A, sleep_ok);
5561 return pfmap;
5562 }
5563
5564 /**
5565 * t4_read_rss_pf_mask - read PF RSS Mask
5566 * @adapter: the adapter
5567 * @sleep_ok: if true we may sleep while awaiting command completion
5568 *
5569 * Reads the PF RSS Mask register and returns its value.
5570 */
t4_read_rss_pf_mask(struct adapter * adapter,bool sleep_ok)5571 u32 t4_read_rss_pf_mask(struct adapter *adapter, bool sleep_ok)
5572 {
5573 u32 pfmask;
5574
5575 t4_tp_pio_read(adapter, &pfmask, 1, TP_RSS_PF_MSK_A, sleep_ok);
5576 return pfmask;
5577 }
5578
5579 /**
5580 * t4_tp_get_tcp_stats - read TP's TCP MIB counters
5581 * @adap: the adapter
5582 * @v4: holds the TCP/IP counter values
5583 * @v6: holds the TCP/IPv6 counter values
5584 * @sleep_ok: if true we may sleep while awaiting command completion
5585 *
5586 * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters.
5587 * Either @v4 or @v6 may be %NULL to skip the corresponding stats.
5588 */
t4_tp_get_tcp_stats(struct adapter * adap,struct tp_tcp_stats * v4,struct tp_tcp_stats * v6,bool sleep_ok)5589 void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
5590 struct tp_tcp_stats *v6, bool sleep_ok)
5591 {
5592 u32 val[TP_MIB_TCP_RXT_SEG_LO_A - TP_MIB_TCP_OUT_RST_A + 1];
5593
5594 #define STAT_IDX(x) ((TP_MIB_TCP_##x##_A) - TP_MIB_TCP_OUT_RST_A)
5595 #define STAT(x) val[STAT_IDX(x)]
5596 #define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO))
5597
5598 if (v4) {
5599 t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
5600 TP_MIB_TCP_OUT_RST_A, sleep_ok);
5601 v4->tcp_out_rsts = STAT(OUT_RST);
5602 v4->tcp_in_segs = STAT64(IN_SEG);
5603 v4->tcp_out_segs = STAT64(OUT_SEG);
5604 v4->tcp_retrans_segs = STAT64(RXT_SEG);
5605 }
5606 if (v6) {
5607 t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
5608 TP_MIB_TCP_V6OUT_RST_A, sleep_ok);
5609 v6->tcp_out_rsts = STAT(OUT_RST);
5610 v6->tcp_in_segs = STAT64(IN_SEG);
5611 v6->tcp_out_segs = STAT64(OUT_SEG);
5612 v6->tcp_retrans_segs = STAT64(RXT_SEG);
5613 }
5614 #undef STAT64
5615 #undef STAT
5616 #undef STAT_IDX
5617 }
5618
5619 /**
5620 * t4_tp_get_err_stats - read TP's error MIB counters
5621 * @adap: the adapter
5622 * @st: holds the counter values
5623 * @sleep_ok: if true we may sleep while awaiting command completion
5624 *
5625 * Returns the values of TP's error counters.
5626 */
t4_tp_get_err_stats(struct adapter * adap,struct tp_err_stats * st,bool sleep_ok)5627 void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st,
5628 bool sleep_ok)
5629 {
5630 int nchan = adap->params.arch.nchan;
5631
5632 t4_tp_mib_read(adap, st->mac_in_errs, nchan, TP_MIB_MAC_IN_ERR_0_A,
5633 sleep_ok);
5634 t4_tp_mib_read(adap, st->hdr_in_errs, nchan, TP_MIB_HDR_IN_ERR_0_A,
5635 sleep_ok);
5636 t4_tp_mib_read(adap, st->tcp_in_errs, nchan, TP_MIB_TCP_IN_ERR_0_A,
5637 sleep_ok);
5638 t4_tp_mib_read(adap, st->tnl_cong_drops, nchan,
5639 TP_MIB_TNL_CNG_DROP_0_A, sleep_ok);
5640 t4_tp_mib_read(adap, st->ofld_chan_drops, nchan,
5641 TP_MIB_OFD_CHN_DROP_0_A, sleep_ok);
5642 t4_tp_mib_read(adap, st->tnl_tx_drops, nchan, TP_MIB_TNL_DROP_0_A,
5643 sleep_ok);
5644 t4_tp_mib_read(adap, st->ofld_vlan_drops, nchan,
5645 TP_MIB_OFD_VLN_DROP_0_A, sleep_ok);
5646 t4_tp_mib_read(adap, st->tcp6_in_errs, nchan,
5647 TP_MIB_TCP_V6IN_ERR_0_A, sleep_ok);
5648 t4_tp_mib_read(adap, &st->ofld_no_neigh, 2, TP_MIB_OFD_ARP_DROP_A,
5649 sleep_ok);
5650 }
5651
5652 /**
5653 * t4_tp_get_cpl_stats - read TP's CPL MIB counters
5654 * @adap: the adapter
5655 * @st: holds the counter values
5656 * @sleep_ok: if true we may sleep while awaiting command completion
5657 *
5658 * Returns the values of TP's CPL counters.
5659 */
t4_tp_get_cpl_stats(struct adapter * adap,struct tp_cpl_stats * st,bool sleep_ok)5660 void t4_tp_get_cpl_stats(struct adapter *adap, struct tp_cpl_stats *st,
5661 bool sleep_ok)
5662 {
5663 int nchan = adap->params.arch.nchan;
5664
5665 t4_tp_mib_read(adap, st->req, nchan, TP_MIB_CPL_IN_REQ_0_A, sleep_ok);
5666
5667 t4_tp_mib_read(adap, st->rsp, nchan, TP_MIB_CPL_OUT_RSP_0_A, sleep_ok);
5668 }
5669
5670 /**
5671 * t4_tp_get_rdma_stats - read TP's RDMA MIB counters
5672 * @adap: the adapter
5673 * @st: holds the counter values
5674 * @sleep_ok: if true we may sleep while awaiting command completion
5675 *
5676 * Returns the values of TP's RDMA counters.
5677 */
t4_tp_get_rdma_stats(struct adapter * adap,struct tp_rdma_stats * st,bool sleep_ok)5678 void t4_tp_get_rdma_stats(struct adapter *adap, struct tp_rdma_stats *st,
5679 bool sleep_ok)
5680 {
5681 t4_tp_mib_read(adap, &st->rqe_dfr_pkt, 2, TP_MIB_RQE_DFR_PKT_A,
5682 sleep_ok);
5683 }
5684
5685 /**
5686 * t4_get_fcoe_stats - read TP's FCoE MIB counters for a port
5687 * @adap: the adapter
5688 * @idx: the port index
5689 * @st: holds the counter values
5690 * @sleep_ok: if true we may sleep while awaiting command completion
5691 *
5692 * Returns the values of TP's FCoE counters for the selected port.
5693 */
t4_get_fcoe_stats(struct adapter * adap,unsigned int idx,struct tp_fcoe_stats * st,bool sleep_ok)5694 void t4_get_fcoe_stats(struct adapter *adap, unsigned int idx,
5695 struct tp_fcoe_stats *st, bool sleep_ok)
5696 {
5697 u32 val[2];
5698
5699 t4_tp_mib_read(adap, &st->frames_ddp, 1, TP_MIB_FCOE_DDP_0_A + idx,
5700 sleep_ok);
5701
5702 t4_tp_mib_read(adap, &st->frames_drop, 1,
5703 TP_MIB_FCOE_DROP_0_A + idx, sleep_ok);
5704
5705 t4_tp_mib_read(adap, val, 2, TP_MIB_FCOE_BYTE_0_HI_A + 2 * idx,
5706 sleep_ok);
5707
5708 st->octets_ddp = ((u64)val[0] << 32) | val[1];
5709 }
5710
5711 /**
5712 * t4_get_usm_stats - read TP's non-TCP DDP MIB counters
5713 * @adap: the adapter
5714 * @st: holds the counter values
5715 * @sleep_ok: if true we may sleep while awaiting command completion
5716 *
5717 * Returns the values of TP's counters for non-TCP directly-placed packets.
5718 */
t4_get_usm_stats(struct adapter * adap,struct tp_usm_stats * st,bool sleep_ok)5719 void t4_get_usm_stats(struct adapter *adap, struct tp_usm_stats *st,
5720 bool sleep_ok)
5721 {
5722 u32 val[4];
5723
5724 t4_tp_mib_read(adap, val, 4, TP_MIB_USM_PKTS_A, sleep_ok);
5725 st->frames = val[0];
5726 st->drops = val[1];
5727 st->octets = ((u64)val[2] << 32) | val[3];
5728 }
5729
5730 /**
5731 * t4_read_mtu_tbl - returns the values in the HW path MTU table
5732 * @adap: the adapter
5733 * @mtus: where to store the MTU values
5734 * @mtu_log: where to store the MTU base-2 log (may be %NULL)
5735 *
5736 * Reads the HW path MTU table.
5737 */
t4_read_mtu_tbl(struct adapter * adap,u16 * mtus,u8 * mtu_log)5738 void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
5739 {
5740 u32 v;
5741 int i;
5742
5743 for (i = 0; i < NMTUS; ++i) {
5744 t4_write_reg(adap, TP_MTU_TABLE_A,
5745 MTUINDEX_V(0xff) | MTUVALUE_V(i));
5746 v = t4_read_reg(adap, TP_MTU_TABLE_A);
5747 mtus[i] = MTUVALUE_G(v);
5748 if (mtu_log)
5749 mtu_log[i] = MTUWIDTH_G(v);
5750 }
5751 }
5752
5753 /**
5754 * t4_read_cong_tbl - reads the congestion control table
5755 * @adap: the adapter
5756 * @incr: where to store the alpha values
5757 *
5758 * Reads the additive increments programmed into the HW congestion
5759 * control table.
5760 */
t4_read_cong_tbl(struct adapter * adap,u16 incr[NMTUS][NCCTRL_WIN])5761 void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN])
5762 {
5763 unsigned int mtu, w;
5764
5765 for (mtu = 0; mtu < NMTUS; ++mtu)
5766 for (w = 0; w < NCCTRL_WIN; ++w) {
5767 t4_write_reg(adap, TP_CCTRL_TABLE_A,
5768 ROWINDEX_V(0xffff) | (mtu << 5) | w);
5769 incr[mtu][w] = (u16)t4_read_reg(adap,
5770 TP_CCTRL_TABLE_A) & 0x1fff;
5771 }
5772 }
5773
5774 /**
5775 * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
5776 * @adap: the adapter
5777 * @addr: the indirect TP register address
5778 * @mask: specifies the field within the register to modify
5779 * @val: new value for the field
5780 *
5781 * Sets a field of an indirect TP register to the given value.
5782 */
t4_tp_wr_bits_indirect(struct adapter * adap,unsigned int addr,unsigned int mask,unsigned int val)5783 void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
5784 unsigned int mask, unsigned int val)
5785 {
5786 t4_write_reg(adap, TP_PIO_ADDR_A, addr);
5787 val |= t4_read_reg(adap, TP_PIO_DATA_A) & ~mask;
5788 t4_write_reg(adap, TP_PIO_DATA_A, val);
5789 }
5790
5791 /**
5792 * init_cong_ctrl - initialize congestion control parameters
5793 * @a: the alpha values for congestion control
5794 * @b: the beta values for congestion control
5795 *
5796 * Initialize the congestion control parameters.
5797 */
init_cong_ctrl(unsigned short * a,unsigned short * b)5798 static void init_cong_ctrl(unsigned short *a, unsigned short *b)
5799 {
5800 a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
5801 a[9] = 2;
5802 a[10] = 3;
5803 a[11] = 4;
5804 a[12] = 5;
5805 a[13] = 6;
5806 a[14] = 7;
5807 a[15] = 8;
5808 a[16] = 9;
5809 a[17] = 10;
5810 a[18] = 14;
5811 a[19] = 17;
5812 a[20] = 21;
5813 a[21] = 25;
5814 a[22] = 30;
5815 a[23] = 35;
5816 a[24] = 45;
5817 a[25] = 60;
5818 a[26] = 80;
5819 a[27] = 100;
5820 a[28] = 200;
5821 a[29] = 300;
5822 a[30] = 400;
5823 a[31] = 500;
5824
5825 b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
5826 b[9] = b[10] = 1;
5827 b[11] = b[12] = 2;
5828 b[13] = b[14] = b[15] = b[16] = 3;
5829 b[17] = b[18] = b[19] = b[20] = b[21] = 4;
5830 b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
5831 b[28] = b[29] = 6;
5832 b[30] = b[31] = 7;
5833 }
5834
5835 /* The minimum additive increment value for the congestion control table */
5836 #define CC_MIN_INCR 2U
5837
5838 /**
5839 * t4_load_mtus - write the MTU and congestion control HW tables
5840 * @adap: the adapter
5841 * @mtus: the values for the MTU table
5842 * @alpha: the values for the congestion control alpha parameter
5843 * @beta: the values for the congestion control beta parameter
5844 *
5845 * Write the HW MTU table with the supplied MTUs and the high-speed
5846 * congestion control table with the supplied alpha, beta, and MTUs.
5847 * We write the two tables together because the additive increments
5848 * depend on the MTUs.
5849 */
t4_load_mtus(struct adapter * adap,const unsigned short * mtus,const unsigned short * alpha,const unsigned short * beta)5850 void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
5851 const unsigned short *alpha, const unsigned short *beta)
5852 {
5853 static const unsigned int avg_pkts[NCCTRL_WIN] = {
5854 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
5855 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
5856 28672, 40960, 57344, 81920, 114688, 163840, 229376
5857 };
5858
5859 unsigned int i, w;
5860
5861 for (i = 0; i < NMTUS; ++i) {
5862 unsigned int mtu = mtus[i];
5863 unsigned int log2 = fls(mtu);
5864
5865 if (!(mtu & ((1 << log2) >> 2))) /* round */
5866 log2--;
5867 t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(i) |
5868 MTUWIDTH_V(log2) | MTUVALUE_V(mtu));
5869
5870 for (w = 0; w < NCCTRL_WIN; ++w) {
5871 unsigned int inc;
5872
5873 inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
5874 CC_MIN_INCR);
5875
5876 t4_write_reg(adap, TP_CCTRL_TABLE_A, (i << 21) |
5877 (w << 16) | (beta[w] << 13) | inc);
5878 }
5879 }
5880 }
5881
5882 /* Calculates a rate in bytes/s given the number of 256-byte units per 4K core
5883 * clocks. The formula is
5884 *
5885 * bytes/s = bytes256 * 256 * ClkFreq / 4096
5886 *
5887 * which is equivalent to
5888 *
5889 * bytes/s = 62.5 * bytes256 * ClkFreq_ms
5890 */
chan_rate(struct adapter * adap,unsigned int bytes256)5891 static u64 chan_rate(struct adapter *adap, unsigned int bytes256)
5892 {
5893 u64 v = bytes256 * adap->params.vpd.cclk;
5894
5895 return v * 62 + v / 2;
5896 }
5897
5898 /**
5899 * t4_get_chan_txrate - get the current per channel Tx rates
5900 * @adap: the adapter
5901 * @nic_rate: rates for NIC traffic
5902 * @ofld_rate: rates for offloaded traffic
5903 *
5904 * Return the current Tx rates in bytes/s for NIC and offloaded traffic
5905 * for each channel.
5906 */
t4_get_chan_txrate(struct adapter * adap,u64 * nic_rate,u64 * ofld_rate)5907 void t4_get_chan_txrate(struct adapter *adap, u64 *nic_rate, u64 *ofld_rate)
5908 {
5909 u32 v;
5910
5911 v = t4_read_reg(adap, TP_TX_TRATE_A);
5912 nic_rate[0] = chan_rate(adap, TNLRATE0_G(v));
5913 nic_rate[1] = chan_rate(adap, TNLRATE1_G(v));
5914 if (adap->params.arch.nchan == NCHAN) {
5915 nic_rate[2] = chan_rate(adap, TNLRATE2_G(v));
5916 nic_rate[3] = chan_rate(adap, TNLRATE3_G(v));
5917 }
5918
5919 v = t4_read_reg(adap, TP_TX_ORATE_A);
5920 ofld_rate[0] = chan_rate(adap, OFDRATE0_G(v));
5921 ofld_rate[1] = chan_rate(adap, OFDRATE1_G(v));
5922 if (adap->params.arch.nchan == NCHAN) {
5923 ofld_rate[2] = chan_rate(adap, OFDRATE2_G(v));
5924 ofld_rate[3] = chan_rate(adap, OFDRATE3_G(v));
5925 }
5926 }
5927
5928 /**
5929 * t4_set_trace_filter - configure one of the tracing filters
5930 * @adap: the adapter
5931 * @tp: the desired trace filter parameters
5932 * @idx: which filter to configure
5933 * @enable: whether to enable or disable the filter
5934 *
5935 * Configures one of the tracing filters available in HW. If @enable is
5936 * %0 @tp is not examined and may be %NULL. The user is responsible to
5937 * set the single/multiple trace mode by writing to MPS_TRC_CFG_A register
5938 */
t4_set_trace_filter(struct adapter * adap,const struct trace_params * tp,int idx,int enable)5939 int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp,
5940 int idx, int enable)
5941 {
5942 int i, ofst = idx * 4;
5943 u32 data_reg, mask_reg, cfg;
5944
5945 if (!enable) {
5946 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);
5947 return 0;
5948 }
5949
5950 cfg = t4_read_reg(adap, MPS_TRC_CFG_A);
5951 if (cfg & TRCMULTIFILTER_F) {
5952 /* If multiple tracers are enabled, then maximum
5953 * capture size is 2.5KB (FIFO size of a single channel)
5954 * minus 2 flits for CPL_TRACE_PKT header.
5955 */
5956 if (tp->snap_len > ((10 * 1024 / 4) - (2 * 8)))
5957 return -EINVAL;
5958 } else {
5959 /* If multiple tracers are disabled, to avoid deadlocks
5960 * maximum packet capture size of 9600 bytes is recommended.
5961 * Also in this mode, only trace0 can be enabled and running.
5962 */
5963 if (tp->snap_len > 9600 || idx)
5964 return -EINVAL;
5965 }
5966
5967 if (tp->port > (is_t4(adap->params.chip) ? 11 : 19) || tp->invert > 1 ||
5968 tp->skip_len > TFLENGTH_M || tp->skip_ofst > TFOFFSET_M ||
5969 tp->min_len > TFMINPKTSIZE_M)
5970 return -EINVAL;
5971
5972 /* stop the tracer we'll be changing */
5973 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);
5974
5975 idx *= (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A);
5976 data_reg = MPS_TRC_FILTER0_MATCH_A + idx;
5977 mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + idx;
5978
5979 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
5980 t4_write_reg(adap, data_reg, tp->data[i]);
5981 t4_write_reg(adap, mask_reg, ~tp->mask[i]);
5982 }
5983 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst,
5984 TFCAPTUREMAX_V(tp->snap_len) |
5985 TFMINPKTSIZE_V(tp->min_len));
5986 t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst,
5987 TFOFFSET_V(tp->skip_ofst) | TFLENGTH_V(tp->skip_len) |
5988 (is_t4(adap->params.chip) ?
5989 TFPORT_V(tp->port) | TFEN_F | TFINVERTMATCH_V(tp->invert) :
5990 T5_TFPORT_V(tp->port) | T5_TFEN_F |
5991 T5_TFINVERTMATCH_V(tp->invert)));
5992
5993 return 0;
5994 }
5995
5996 /**
5997 * t4_get_trace_filter - query one of the tracing filters
5998 * @adap: the adapter
5999 * @tp: the current trace filter parameters
6000 * @idx: which trace filter to query
6001 * @enabled: non-zero if the filter is enabled
6002 *
6003 * Returns the current settings of one of the HW tracing filters.
6004 */
t4_get_trace_filter(struct adapter * adap,struct trace_params * tp,int idx,int * enabled)6005 void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx,
6006 int *enabled)
6007 {
6008 u32 ctla, ctlb;
6009 int i, ofst = idx * 4;
6010 u32 data_reg, mask_reg;
6011
6012 ctla = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst);
6013 ctlb = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst);
6014
6015 if (is_t4(adap->params.chip)) {
6016 *enabled = !!(ctla & TFEN_F);
6017 tp->port = TFPORT_G(ctla);
6018 tp->invert = !!(ctla & TFINVERTMATCH_F);
6019 } else {
6020 *enabled = !!(ctla & T5_TFEN_F);
6021 tp->port = T5_TFPORT_G(ctla);
6022 tp->invert = !!(ctla & T5_TFINVERTMATCH_F);
6023 }
6024 tp->snap_len = TFCAPTUREMAX_G(ctlb);
6025 tp->min_len = TFMINPKTSIZE_G(ctlb);
6026 tp->skip_ofst = TFOFFSET_G(ctla);
6027 tp->skip_len = TFLENGTH_G(ctla);
6028
6029 ofst = (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A) * idx;
6030 data_reg = MPS_TRC_FILTER0_MATCH_A + ofst;
6031 mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + ofst;
6032
6033 for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
6034 tp->mask[i] = ~t4_read_reg(adap, mask_reg);
6035 tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i];
6036 }
6037 }
6038
6039 /**
6040 * t4_pmtx_get_stats - returns the HW stats from PMTX
6041 * @adap: the adapter
6042 * @cnt: where to store the count statistics
6043 * @cycles: where to store the cycle statistics
6044 *
6045 * Returns performance statistics from PMTX.
6046 */
t4_pmtx_get_stats(struct adapter * adap,u32 cnt[],u64 cycles[])6047 void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
6048 {
6049 int i;
6050 u32 data[2];
6051
6052 for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
6053 t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1);
6054 cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A);
6055 if (is_t4(adap->params.chip)) {
6056 cycles[i] = t4_read_reg64(adap, PM_TX_STAT_LSB_A);
6057 } else {
6058 t4_read_indirect(adap, PM_TX_DBG_CTRL_A,
6059 PM_TX_DBG_DATA_A, data, 2,
6060 PM_TX_DBG_STAT_MSB_A);
6061 cycles[i] = (((u64)data[0] << 32) | data[1]);
6062 }
6063 }
6064 }
6065
6066 /**
6067 * t4_pmrx_get_stats - returns the HW stats from PMRX
6068 * @adap: the adapter
6069 * @cnt: where to store the count statistics
6070 * @cycles: where to store the cycle statistics
6071 *
6072 * Returns performance statistics from PMRX.
6073 */
t4_pmrx_get_stats(struct adapter * adap,u32 cnt[],u64 cycles[])6074 void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
6075 {
6076 int i;
6077 u32 data[2];
6078
6079 for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
6080 t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1);
6081 cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A);
6082 if (is_t4(adap->params.chip)) {
6083 cycles[i] = t4_read_reg64(adap, PM_RX_STAT_LSB_A);
6084 } else {
6085 t4_read_indirect(adap, PM_RX_DBG_CTRL_A,
6086 PM_RX_DBG_DATA_A, data, 2,
6087 PM_RX_DBG_STAT_MSB_A);
6088 cycles[i] = (((u64)data[0] << 32) | data[1]);
6089 }
6090 }
6091 }
6092
6093 /**
6094 * compute_mps_bg_map - compute the MPS Buffer Group Map for a Port
6095 * @adapter: the adapter
6096 * @pidx: the port index
6097 *
6098 * Computes and returns a bitmap indicating which MPS buffer groups are
6099 * associated with the given Port. Bit i is set if buffer group i is
6100 * used by the Port.
6101 */
compute_mps_bg_map(struct adapter * adapter,int pidx)6102 static inline unsigned int compute_mps_bg_map(struct adapter *adapter,
6103 int pidx)
6104 {
6105 unsigned int chip_version, nports;
6106
6107 chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
6108 nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
6109
6110 switch (chip_version) {
6111 case CHELSIO_T4:
6112 case CHELSIO_T5:
6113 switch (nports) {
6114 case 1: return 0xf;
6115 case 2: return 3 << (2 * pidx);
6116 case 4: return 1 << pidx;
6117 }
6118 break;
6119
6120 case CHELSIO_T6:
6121 switch (nports) {
6122 case 2: return 1 << (2 * pidx);
6123 }
6124 break;
6125 }
6126
6127 dev_err(adapter->pdev_dev, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
6128 chip_version, nports);
6129
6130 return 0;
6131 }
6132
6133 /**
6134 * t4_get_mps_bg_map - return the buffer groups associated with a port
6135 * @adapter: the adapter
6136 * @pidx: the port index
6137 *
6138 * Returns a bitmap indicating which MPS buffer groups are associated
6139 * with the given Port. Bit i is set if buffer group i is used by the
6140 * Port.
6141 */
t4_get_mps_bg_map(struct adapter * adapter,int pidx)6142 unsigned int t4_get_mps_bg_map(struct adapter *adapter, int pidx)
6143 {
6144 u8 *mps_bg_map;
6145 unsigned int nports;
6146
6147 nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
6148 if (pidx >= nports) {
6149 CH_WARN(adapter, "MPS Port Index %d >= Nports %d\n",
6150 pidx, nports);
6151 return 0;
6152 }
6153
6154 /* If we've already retrieved/computed this, just return the result.
6155 */
6156 mps_bg_map = adapter->params.mps_bg_map;
6157 if (mps_bg_map[pidx])
6158 return mps_bg_map[pidx];
6159
6160 /* Newer Firmware can tell us what the MPS Buffer Group Map is.
6161 * If we're talking to such Firmware, let it tell us. If the new
6162 * API isn't supported, revert back to old hardcoded way. The value
6163 * obtained from Firmware is encoded in below format:
6164 *
6165 * val = (( MPSBGMAP[Port 3] << 24 ) |
6166 * ( MPSBGMAP[Port 2] << 16 ) |
6167 * ( MPSBGMAP[Port 1] << 8 ) |
6168 * ( MPSBGMAP[Port 0] << 0 ))
6169 */
6170 if (adapter->flags & CXGB4_FW_OK) {
6171 u32 param, val;
6172 int ret;
6173
6174 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
6175 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_MPSBGMAP));
6176 ret = t4_query_params_ns(adapter, adapter->mbox, adapter->pf,
6177 0, 1, ¶m, &val);
6178 if (!ret) {
6179 int p;
6180
6181 /* Store the BG Map for all of the Ports in order to
6182 * avoid more calls to the Firmware in the future.
6183 */
6184 for (p = 0; p < MAX_NPORTS; p++, val >>= 8)
6185 mps_bg_map[p] = val & 0xff;
6186
6187 return mps_bg_map[pidx];
6188 }
6189 }
6190
6191 /* Either we're not talking to the Firmware or we're dealing with
6192 * older Firmware which doesn't support the new API to get the MPS
6193 * Buffer Group Map. Fall back to computing it ourselves.
6194 */
6195 mps_bg_map[pidx] = compute_mps_bg_map(adapter, pidx);
6196 return mps_bg_map[pidx];
6197 }
6198
6199 /**
6200 * t4_get_tp_e2c_map - return the E2C channel map associated with a port
6201 * @adapter: the adapter
6202 * @pidx: the port index
6203 */
t4_get_tp_e2c_map(struct adapter * adapter,int pidx)6204 static unsigned int t4_get_tp_e2c_map(struct adapter *adapter, int pidx)
6205 {
6206 unsigned int nports;
6207 u32 param, val = 0;
6208 int ret;
6209
6210 nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
6211 if (pidx >= nports) {
6212 CH_WARN(adapter, "TP E2C Channel Port Index %d >= Nports %d\n",
6213 pidx, nports);
6214 return 0;
6215 }
6216
6217 /* FW version >= 1.16.44.0 can determine E2C channel map using
6218 * FW_PARAMS_PARAM_DEV_TPCHMAP API.
6219 */
6220 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
6221 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_TPCHMAP));
6222 ret = t4_query_params_ns(adapter, adapter->mbox, adapter->pf,
6223 0, 1, ¶m, &val);
6224 if (!ret)
6225 return (val >> (8 * pidx)) & 0xff;
6226
6227 return 0;
6228 }
6229
6230 /**
6231 * t4_get_tp_ch_map - return TP ingress channels associated with a port
6232 * @adap: the adapter
6233 * @pidx: the port index
6234 *
6235 * Returns a bitmap indicating which TP Ingress Channels are associated
6236 * with a given Port. Bit i is set if TP Ingress Channel i is used by
6237 * the Port.
6238 */
t4_get_tp_ch_map(struct adapter * adap,int pidx)6239 unsigned int t4_get_tp_ch_map(struct adapter *adap, int pidx)
6240 {
6241 unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
6242 unsigned int nports = 1 << NUMPORTS_G(t4_read_reg(adap, MPS_CMN_CTL_A));
6243
6244 if (pidx >= nports) {
6245 dev_warn(adap->pdev_dev, "TP Port Index %d >= Nports %d\n",
6246 pidx, nports);
6247 return 0;
6248 }
6249
6250 switch (chip_version) {
6251 case CHELSIO_T4:
6252 case CHELSIO_T5:
6253 /* Note that this happens to be the same values as the MPS
6254 * Buffer Group Map for these Chips. But we replicate the code
6255 * here because they're really separate concepts.
6256 */
6257 switch (nports) {
6258 case 1: return 0xf;
6259 case 2: return 3 << (2 * pidx);
6260 case 4: return 1 << pidx;
6261 }
6262 break;
6263
6264 case CHELSIO_T6:
6265 switch (nports) {
6266 case 1:
6267 case 2: return 1 << pidx;
6268 }
6269 break;
6270 }
6271
6272 dev_err(adap->pdev_dev, "Need TP Channel Map for Chip %0x, Nports %d\n",
6273 chip_version, nports);
6274 return 0;
6275 }
6276
6277 /**
6278 * t4_get_port_type_description - return Port Type string description
6279 * @port_type: firmware Port Type enumeration
6280 */
t4_get_port_type_description(enum fw_port_type port_type)6281 const char *t4_get_port_type_description(enum fw_port_type port_type)
6282 {
6283 static const char *const port_type_description[] = {
6284 "Fiber_XFI",
6285 "Fiber_XAUI",
6286 "BT_SGMII",
6287 "BT_XFI",
6288 "BT_XAUI",
6289 "KX4",
6290 "CX4",
6291 "KX",
6292 "KR",
6293 "SFP",
6294 "BP_AP",
6295 "BP4_AP",
6296 "QSFP_10G",
6297 "QSA",
6298 "QSFP",
6299 "BP40_BA",
6300 "KR4_100G",
6301 "CR4_QSFP",
6302 "CR_QSFP",
6303 "CR2_QSFP",
6304 "SFP28",
6305 "KR_SFP28",
6306 "KR_XLAUI"
6307 };
6308
6309 if (port_type < ARRAY_SIZE(port_type_description))
6310 return port_type_description[port_type];
6311 return "UNKNOWN";
6312 }
6313
6314 /**
6315 * t4_get_port_stats_offset - collect port stats relative to a previous
6316 * snapshot
6317 * @adap: The adapter
6318 * @idx: The port
6319 * @stats: Current stats to fill
6320 * @offset: Previous stats snapshot
6321 */
t4_get_port_stats_offset(struct adapter * adap,int idx,struct port_stats * stats,struct port_stats * offset)6322 void t4_get_port_stats_offset(struct adapter *adap, int idx,
6323 struct port_stats *stats,
6324 struct port_stats *offset)
6325 {
6326 u64 *s, *o;
6327 int i;
6328
6329 t4_get_port_stats(adap, idx, stats);
6330 for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
6331 i < (sizeof(struct port_stats) / sizeof(u64));
6332 i++, s++, o++)
6333 *s -= *o;
6334 }
6335
6336 /**
6337 * t4_get_port_stats - collect port statistics
6338 * @adap: the adapter
6339 * @idx: the port index
6340 * @p: the stats structure to fill
6341 *
6342 * Collect statistics related to the given port from HW.
6343 */
t4_get_port_stats(struct adapter * adap,int idx,struct port_stats * p)6344 void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
6345 {
6346 u32 bgmap = t4_get_mps_bg_map(adap, idx);
6347 u32 stat_ctl = t4_read_reg(adap, MPS_STAT_CTL_A);
6348
6349 #define GET_STAT(name) \
6350 t4_read_reg64(adap, \
6351 (is_t4(adap->params.chip) ? PORT_REG(idx, MPS_PORT_STAT_##name##_L) : \
6352 T5_PORT_REG(idx, MPS_PORT_STAT_##name##_L)))
6353 #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
6354
6355 p->tx_octets = GET_STAT(TX_PORT_BYTES);
6356 p->tx_frames = GET_STAT(TX_PORT_FRAMES);
6357 p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
6358 p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
6359 p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
6360 p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
6361 p->tx_frames_64 = GET_STAT(TX_PORT_64B);
6362 p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
6363 p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
6364 p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
6365 p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
6366 p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
6367 p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
6368 p->tx_drop = GET_STAT(TX_PORT_DROP);
6369 p->tx_pause = GET_STAT(TX_PORT_PAUSE);
6370 p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
6371 p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
6372 p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
6373 p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
6374 p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
6375 p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
6376 p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
6377 p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
6378
6379 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
6380 if (stat_ctl & COUNTPAUSESTATTX_F)
6381 p->tx_frames_64 -= p->tx_pause;
6382 if (stat_ctl & COUNTPAUSEMCTX_F)
6383 p->tx_mcast_frames -= p->tx_pause;
6384 }
6385 p->rx_octets = GET_STAT(RX_PORT_BYTES);
6386 p->rx_frames = GET_STAT(RX_PORT_FRAMES);
6387 p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
6388 p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
6389 p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
6390 p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
6391 p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
6392 p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
6393 p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
6394 p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
6395 p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
6396 p->rx_frames_64 = GET_STAT(RX_PORT_64B);
6397 p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
6398 p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
6399 p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
6400 p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
6401 p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
6402 p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
6403 p->rx_pause = GET_STAT(RX_PORT_PAUSE);
6404 p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
6405 p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
6406 p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
6407 p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
6408 p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
6409 p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
6410 p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
6411 p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
6412
6413 if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
6414 if (stat_ctl & COUNTPAUSESTATRX_F)
6415 p->rx_frames_64 -= p->rx_pause;
6416 if (stat_ctl & COUNTPAUSEMCRX_F)
6417 p->rx_mcast_frames -= p->rx_pause;
6418 }
6419
6420 p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
6421 p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
6422 p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
6423 p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
6424 p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
6425 p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
6426 p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
6427 p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
6428
6429 #undef GET_STAT
6430 #undef GET_STAT_COM
6431 }
6432
6433 /**
6434 * t4_get_lb_stats - collect loopback port statistics
6435 * @adap: the adapter
6436 * @idx: the loopback port index
6437 * @p: the stats structure to fill
6438 *
6439 * Return HW statistics for the given loopback port.
6440 */
t4_get_lb_stats(struct adapter * adap,int idx,struct lb_port_stats * p)6441 void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p)
6442 {
6443 u32 bgmap = t4_get_mps_bg_map(adap, idx);
6444
6445 #define GET_STAT(name) \
6446 t4_read_reg64(adap, \
6447 (is_t4(adap->params.chip) ? \
6448 PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L) : \
6449 T5_PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L)))
6450 #define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
6451
6452 p->octets = GET_STAT(BYTES);
6453 p->frames = GET_STAT(FRAMES);
6454 p->bcast_frames = GET_STAT(BCAST);
6455 p->mcast_frames = GET_STAT(MCAST);
6456 p->ucast_frames = GET_STAT(UCAST);
6457 p->error_frames = GET_STAT(ERROR);
6458
6459 p->frames_64 = GET_STAT(64B);
6460 p->frames_65_127 = GET_STAT(65B_127B);
6461 p->frames_128_255 = GET_STAT(128B_255B);
6462 p->frames_256_511 = GET_STAT(256B_511B);
6463 p->frames_512_1023 = GET_STAT(512B_1023B);
6464 p->frames_1024_1518 = GET_STAT(1024B_1518B);
6465 p->frames_1519_max = GET_STAT(1519B_MAX);
6466 p->drop = GET_STAT(DROP_FRAMES);
6467
6468 p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0;
6469 p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0;
6470 p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0;
6471 p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0;
6472 p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0;
6473 p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0;
6474 p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0;
6475 p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0;
6476
6477 #undef GET_STAT
6478 #undef GET_STAT_COM
6479 }
6480
6481 /* t4_mk_filtdelwr - create a delete filter WR
6482 * @ftid: the filter ID
6483 * @wr: the filter work request to populate
6484 * @qid: ingress queue to receive the delete notification
6485 *
6486 * Creates a filter work request to delete the supplied filter. If @qid is
6487 * negative the delete notification is suppressed.
6488 */
t4_mk_filtdelwr(unsigned int ftid,struct fw_filter_wr * wr,int qid)6489 void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid)
6490 {
6491 memset(wr, 0, sizeof(*wr));
6492 wr->op_pkd = cpu_to_be32(FW_WR_OP_V(FW_FILTER_WR));
6493 wr->len16_pkd = cpu_to_be32(FW_WR_LEN16_V(sizeof(*wr) / 16));
6494 wr->tid_to_iq = cpu_to_be32(FW_FILTER_WR_TID_V(ftid) |
6495 FW_FILTER_WR_NOREPLY_V(qid < 0));
6496 wr->del_filter_to_l2tix = cpu_to_be32(FW_FILTER_WR_DEL_FILTER_F);
6497 if (qid >= 0)
6498 wr->rx_chan_rx_rpl_iq =
6499 cpu_to_be16(FW_FILTER_WR_RX_RPL_IQ_V(qid));
6500 }
6501
6502 #define INIT_CMD(var, cmd, rd_wr) do { \
6503 (var).op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_##cmd##_CMD) | \
6504 FW_CMD_REQUEST_F | \
6505 FW_CMD_##rd_wr##_F); \
6506 (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
6507 } while (0)
6508
t4_fwaddrspace_write(struct adapter * adap,unsigned int mbox,u32 addr,u32 val)6509 int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
6510 u32 addr, u32 val)
6511 {
6512 u32 ldst_addrspace;
6513 struct fw_ldst_cmd c;
6514
6515 memset(&c, 0, sizeof(c));
6516 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FIRMWARE);
6517 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6518 FW_CMD_REQUEST_F |
6519 FW_CMD_WRITE_F |
6520 ldst_addrspace);
6521 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6522 c.u.addrval.addr = cpu_to_be32(addr);
6523 c.u.addrval.val = cpu_to_be32(val);
6524
6525 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6526 }
6527
6528 /**
6529 * t4_mdio_rd - read a PHY register through MDIO
6530 * @adap: the adapter
6531 * @mbox: mailbox to use for the FW command
6532 * @phy_addr: the PHY address
6533 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
6534 * @reg: the register to read
6535 * @valp: where to store the value
6536 *
6537 * Issues a FW command through the given mailbox to read a PHY register.
6538 */
t4_mdio_rd(struct adapter * adap,unsigned int mbox,unsigned int phy_addr,unsigned int mmd,unsigned int reg,u16 * valp)6539 int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
6540 unsigned int mmd, unsigned int reg, u16 *valp)
6541 {
6542 int ret;
6543 u32 ldst_addrspace;
6544 struct fw_ldst_cmd c;
6545
6546 memset(&c, 0, sizeof(c));
6547 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
6548 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6549 FW_CMD_REQUEST_F | FW_CMD_READ_F |
6550 ldst_addrspace);
6551 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6552 c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
6553 FW_LDST_CMD_MMD_V(mmd));
6554 c.u.mdio.raddr = cpu_to_be16(reg);
6555
6556 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6557 if (ret == 0)
6558 *valp = be16_to_cpu(c.u.mdio.rval);
6559 return ret;
6560 }
6561
6562 /**
6563 * t4_mdio_wr - write a PHY register through MDIO
6564 * @adap: the adapter
6565 * @mbox: mailbox to use for the FW command
6566 * @phy_addr: the PHY address
6567 * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
6568 * @reg: the register to write
6569 * @val: value to write
6570 *
6571 * Issues a FW command through the given mailbox to write a PHY register.
6572 */
t4_mdio_wr(struct adapter * adap,unsigned int mbox,unsigned int phy_addr,unsigned int mmd,unsigned int reg,u16 val)6573 int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
6574 unsigned int mmd, unsigned int reg, u16 val)
6575 {
6576 u32 ldst_addrspace;
6577 struct fw_ldst_cmd c;
6578
6579 memset(&c, 0, sizeof(c));
6580 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
6581 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6582 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
6583 ldst_addrspace);
6584 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6585 c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
6586 FW_LDST_CMD_MMD_V(mmd));
6587 c.u.mdio.raddr = cpu_to_be16(reg);
6588 c.u.mdio.rval = cpu_to_be16(val);
6589
6590 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6591 }
6592
6593 /**
6594 * t4_sge_decode_idma_state - decode the idma state
6595 * @adapter: the adapter
6596 * @state: the state idma is stuck in
6597 */
t4_sge_decode_idma_state(struct adapter * adapter,int state)6598 void t4_sge_decode_idma_state(struct adapter *adapter, int state)
6599 {
6600 static const char * const t4_decode[] = {
6601 "IDMA_IDLE",
6602 "IDMA_PUSH_MORE_CPL_FIFO",
6603 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6604 "Not used",
6605 "IDMA_PHYSADDR_SEND_PCIEHDR",
6606 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6607 "IDMA_PHYSADDR_SEND_PAYLOAD",
6608 "IDMA_SEND_FIFO_TO_IMSG",
6609 "IDMA_FL_REQ_DATA_FL_PREP",
6610 "IDMA_FL_REQ_DATA_FL",
6611 "IDMA_FL_DROP",
6612 "IDMA_FL_H_REQ_HEADER_FL",
6613 "IDMA_FL_H_SEND_PCIEHDR",
6614 "IDMA_FL_H_PUSH_CPL_FIFO",
6615 "IDMA_FL_H_SEND_CPL",
6616 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6617 "IDMA_FL_H_SEND_IP_HDR",
6618 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6619 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6620 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6621 "IDMA_FL_D_SEND_PCIEHDR",
6622 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6623 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6624 "IDMA_FL_SEND_PCIEHDR",
6625 "IDMA_FL_PUSH_CPL_FIFO",
6626 "IDMA_FL_SEND_CPL",
6627 "IDMA_FL_SEND_PAYLOAD_FIRST",
6628 "IDMA_FL_SEND_PAYLOAD",
6629 "IDMA_FL_REQ_NEXT_DATA_FL",
6630 "IDMA_FL_SEND_NEXT_PCIEHDR",
6631 "IDMA_FL_SEND_PADDING",
6632 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6633 "IDMA_FL_SEND_FIFO_TO_IMSG",
6634 "IDMA_FL_REQ_DATAFL_DONE",
6635 "IDMA_FL_REQ_HEADERFL_DONE",
6636 };
6637 static const char * const t5_decode[] = {
6638 "IDMA_IDLE",
6639 "IDMA_ALMOST_IDLE",
6640 "IDMA_PUSH_MORE_CPL_FIFO",
6641 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6642 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
6643 "IDMA_PHYSADDR_SEND_PCIEHDR",
6644 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6645 "IDMA_PHYSADDR_SEND_PAYLOAD",
6646 "IDMA_SEND_FIFO_TO_IMSG",
6647 "IDMA_FL_REQ_DATA_FL",
6648 "IDMA_FL_DROP",
6649 "IDMA_FL_DROP_SEND_INC",
6650 "IDMA_FL_H_REQ_HEADER_FL",
6651 "IDMA_FL_H_SEND_PCIEHDR",
6652 "IDMA_FL_H_PUSH_CPL_FIFO",
6653 "IDMA_FL_H_SEND_CPL",
6654 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6655 "IDMA_FL_H_SEND_IP_HDR",
6656 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6657 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6658 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6659 "IDMA_FL_D_SEND_PCIEHDR",
6660 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6661 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6662 "IDMA_FL_SEND_PCIEHDR",
6663 "IDMA_FL_PUSH_CPL_FIFO",
6664 "IDMA_FL_SEND_CPL",
6665 "IDMA_FL_SEND_PAYLOAD_FIRST",
6666 "IDMA_FL_SEND_PAYLOAD",
6667 "IDMA_FL_REQ_NEXT_DATA_FL",
6668 "IDMA_FL_SEND_NEXT_PCIEHDR",
6669 "IDMA_FL_SEND_PADDING",
6670 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6671 };
6672 static const char * const t6_decode[] = {
6673 "IDMA_IDLE",
6674 "IDMA_PUSH_MORE_CPL_FIFO",
6675 "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
6676 "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
6677 "IDMA_PHYSADDR_SEND_PCIEHDR",
6678 "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
6679 "IDMA_PHYSADDR_SEND_PAYLOAD",
6680 "IDMA_FL_REQ_DATA_FL",
6681 "IDMA_FL_DROP",
6682 "IDMA_FL_DROP_SEND_INC",
6683 "IDMA_FL_H_REQ_HEADER_FL",
6684 "IDMA_FL_H_SEND_PCIEHDR",
6685 "IDMA_FL_H_PUSH_CPL_FIFO",
6686 "IDMA_FL_H_SEND_CPL",
6687 "IDMA_FL_H_SEND_IP_HDR_FIRST",
6688 "IDMA_FL_H_SEND_IP_HDR",
6689 "IDMA_FL_H_REQ_NEXT_HEADER_FL",
6690 "IDMA_FL_H_SEND_NEXT_PCIEHDR",
6691 "IDMA_FL_H_SEND_IP_HDR_PADDING",
6692 "IDMA_FL_D_SEND_PCIEHDR",
6693 "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
6694 "IDMA_FL_D_REQ_NEXT_DATA_FL",
6695 "IDMA_FL_SEND_PCIEHDR",
6696 "IDMA_FL_PUSH_CPL_FIFO",
6697 "IDMA_FL_SEND_CPL",
6698 "IDMA_FL_SEND_PAYLOAD_FIRST",
6699 "IDMA_FL_SEND_PAYLOAD",
6700 "IDMA_FL_REQ_NEXT_DATA_FL",
6701 "IDMA_FL_SEND_NEXT_PCIEHDR",
6702 "IDMA_FL_SEND_PADDING",
6703 "IDMA_FL_SEND_COMPLETION_TO_IMSG",
6704 };
6705 static const u32 sge_regs[] = {
6706 SGE_DEBUG_DATA_LOW_INDEX_2_A,
6707 SGE_DEBUG_DATA_LOW_INDEX_3_A,
6708 SGE_DEBUG_DATA_HIGH_INDEX_10_A,
6709 };
6710 const char **sge_idma_decode;
6711 int sge_idma_decode_nstates;
6712 int i;
6713 unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
6714
6715 /* Select the right set of decode strings to dump depending on the
6716 * adapter chip type.
6717 */
6718 switch (chip_version) {
6719 case CHELSIO_T4:
6720 sge_idma_decode = (const char **)t4_decode;
6721 sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
6722 break;
6723
6724 case CHELSIO_T5:
6725 sge_idma_decode = (const char **)t5_decode;
6726 sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
6727 break;
6728
6729 case CHELSIO_T6:
6730 sge_idma_decode = (const char **)t6_decode;
6731 sge_idma_decode_nstates = ARRAY_SIZE(t6_decode);
6732 break;
6733
6734 default:
6735 dev_err(adapter->pdev_dev,
6736 "Unsupported chip version %d\n", chip_version);
6737 return;
6738 }
6739
6740 if (state < sge_idma_decode_nstates)
6741 CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
6742 else
6743 CH_WARN(adapter, "idma state %d unknown\n", state);
6744
6745 for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
6746 CH_WARN(adapter, "SGE register %#x value %#x\n",
6747 sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
6748 }
6749
6750 /**
6751 * t4_sge_ctxt_flush - flush the SGE context cache
6752 * @adap: the adapter
6753 * @mbox: mailbox to use for the FW command
6754 * @ctxt_type: Egress or Ingress
6755 *
6756 * Issues a FW command through the given mailbox to flush the
6757 * SGE context cache.
6758 */
t4_sge_ctxt_flush(struct adapter * adap,unsigned int mbox,int ctxt_type)6759 int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type)
6760 {
6761 int ret;
6762 u32 ldst_addrspace;
6763 struct fw_ldst_cmd c;
6764
6765 memset(&c, 0, sizeof(c));
6766 ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(ctxt_type == CTXT_EGRESS ?
6767 FW_LDST_ADDRSPC_SGE_EGRC :
6768 FW_LDST_ADDRSPC_SGE_INGC);
6769 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
6770 FW_CMD_REQUEST_F | FW_CMD_READ_F |
6771 ldst_addrspace);
6772 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
6773 c.u.idctxt.msg_ctxtflush = cpu_to_be32(FW_LDST_CMD_CTXTFLUSH_F);
6774
6775 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6776 return ret;
6777 }
6778
6779 /**
6780 * t4_read_sge_dbqtimers - read SGE Doorbell Queue Timer values
6781 * @adap: the adapter
6782 * @ndbqtimers: size of the provided SGE Doorbell Queue Timer table
6783 * @dbqtimers: SGE Doorbell Queue Timer table
6784 *
6785 * Reads the SGE Doorbell Queue Timer values into the provided table.
6786 * Returns 0 on success (Firmware and Hardware support this feature),
6787 * an error on failure.
6788 */
t4_read_sge_dbqtimers(struct adapter * adap,unsigned int ndbqtimers,u16 * dbqtimers)6789 int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers,
6790 u16 *dbqtimers)
6791 {
6792 int ret, dbqtimerix;
6793
6794 ret = 0;
6795 dbqtimerix = 0;
6796 while (dbqtimerix < ndbqtimers) {
6797 int nparams, param;
6798 u32 params[7], vals[7];
6799
6800 nparams = ndbqtimers - dbqtimerix;
6801 if (nparams > ARRAY_SIZE(params))
6802 nparams = ARRAY_SIZE(params);
6803
6804 for (param = 0; param < nparams; param++)
6805 params[param] =
6806 (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
6807 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMER) |
6808 FW_PARAMS_PARAM_Y_V(dbqtimerix + param));
6809 ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
6810 nparams, params, vals);
6811 if (ret)
6812 break;
6813
6814 for (param = 0; param < nparams; param++)
6815 dbqtimers[dbqtimerix++] = vals[param];
6816 }
6817 return ret;
6818 }
6819
6820 /**
6821 * t4_fw_hello - establish communication with FW
6822 * @adap: the adapter
6823 * @mbox: mailbox to use for the FW command
6824 * @evt_mbox: mailbox to receive async FW events
6825 * @master: specifies the caller's willingness to be the device master
6826 * @state: returns the current device state (if non-NULL)
6827 *
6828 * Issues a command to establish communication with FW. Returns either
6829 * an error (negative integer) or the mailbox of the Master PF.
6830 */
t4_fw_hello(struct adapter * adap,unsigned int mbox,unsigned int evt_mbox,enum dev_master master,enum dev_state * state)6831 int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
6832 enum dev_master master, enum dev_state *state)
6833 {
6834 int ret;
6835 struct fw_hello_cmd c;
6836 u32 v;
6837 unsigned int master_mbox;
6838 int retries = FW_CMD_HELLO_RETRIES;
6839
6840 retry:
6841 memset(&c, 0, sizeof(c));
6842 INIT_CMD(c, HELLO, WRITE);
6843 c.err_to_clearinit = cpu_to_be32(
6844 FW_HELLO_CMD_MASTERDIS_V(master == MASTER_CANT) |
6845 FW_HELLO_CMD_MASTERFORCE_V(master == MASTER_MUST) |
6846 FW_HELLO_CMD_MBMASTER_V(master == MASTER_MUST ?
6847 mbox : FW_HELLO_CMD_MBMASTER_M) |
6848 FW_HELLO_CMD_MBASYNCNOT_V(evt_mbox) |
6849 FW_HELLO_CMD_STAGE_V(fw_hello_cmd_stage_os) |
6850 FW_HELLO_CMD_CLEARINIT_F);
6851
6852 /*
6853 * Issue the HELLO command to the firmware. If it's not successful
6854 * but indicates that we got a "busy" or "timeout" condition, retry
6855 * the HELLO until we exhaust our retry limit. If we do exceed our
6856 * retry limit, check to see if the firmware left us any error
6857 * information and report that if so.
6858 */
6859 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
6860 if (ret < 0) {
6861 if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
6862 goto retry;
6863 if (t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_ERR_F)
6864 t4_report_fw_error(adap);
6865 return ret;
6866 }
6867
6868 v = be32_to_cpu(c.err_to_clearinit);
6869 master_mbox = FW_HELLO_CMD_MBMASTER_G(v);
6870 if (state) {
6871 if (v & FW_HELLO_CMD_ERR_F)
6872 *state = DEV_STATE_ERR;
6873 else if (v & FW_HELLO_CMD_INIT_F)
6874 *state = DEV_STATE_INIT;
6875 else
6876 *state = DEV_STATE_UNINIT;
6877 }
6878
6879 /*
6880 * If we're not the Master PF then we need to wait around for the
6881 * Master PF Driver to finish setting up the adapter.
6882 *
6883 * Note that we also do this wait if we're a non-Master-capable PF and
6884 * there is no current Master PF; a Master PF may show up momentarily
6885 * and we wouldn't want to fail pointlessly. (This can happen when an
6886 * OS loads lots of different drivers rapidly at the same time). In
6887 * this case, the Master PF returned by the firmware will be
6888 * PCIE_FW_MASTER_M so the test below will work ...
6889 */
6890 if ((v & (FW_HELLO_CMD_ERR_F|FW_HELLO_CMD_INIT_F)) == 0 &&
6891 master_mbox != mbox) {
6892 int waiting = FW_CMD_HELLO_TIMEOUT;
6893
6894 /*
6895 * Wait for the firmware to either indicate an error or
6896 * initialized state. If we see either of these we bail out
6897 * and report the issue to the caller. If we exhaust the
6898 * "hello timeout" and we haven't exhausted our retries, try
6899 * again. Otherwise bail with a timeout error.
6900 */
6901 for (;;) {
6902 u32 pcie_fw;
6903
6904 msleep(50);
6905 waiting -= 50;
6906
6907 /*
6908 * If neither Error nor Initialized are indicated
6909 * by the firmware keep waiting till we exhaust our
6910 * timeout ... and then retry if we haven't exhausted
6911 * our retries ...
6912 */
6913 pcie_fw = t4_read_reg(adap, PCIE_FW_A);
6914 if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) {
6915 if (waiting <= 0) {
6916 if (retries-- > 0)
6917 goto retry;
6918
6919 return -ETIMEDOUT;
6920 }
6921 continue;
6922 }
6923
6924 /*
6925 * We either have an Error or Initialized condition
6926 * report errors preferentially.
6927 */
6928 if (state) {
6929 if (pcie_fw & PCIE_FW_ERR_F)
6930 *state = DEV_STATE_ERR;
6931 else if (pcie_fw & PCIE_FW_INIT_F)
6932 *state = DEV_STATE_INIT;
6933 }
6934
6935 /*
6936 * If we arrived before a Master PF was selected and
6937 * there's not a valid Master PF, grab its identity
6938 * for our caller.
6939 */
6940 if (master_mbox == PCIE_FW_MASTER_M &&
6941 (pcie_fw & PCIE_FW_MASTER_VLD_F))
6942 master_mbox = PCIE_FW_MASTER_G(pcie_fw);
6943 break;
6944 }
6945 }
6946
6947 return master_mbox;
6948 }
6949
6950 /**
6951 * t4_fw_bye - end communication with FW
6952 * @adap: the adapter
6953 * @mbox: mailbox to use for the FW command
6954 *
6955 * Issues a command to terminate communication with FW.
6956 */
t4_fw_bye(struct adapter * adap,unsigned int mbox)6957 int t4_fw_bye(struct adapter *adap, unsigned int mbox)
6958 {
6959 struct fw_bye_cmd c;
6960
6961 memset(&c, 0, sizeof(c));
6962 INIT_CMD(c, BYE, WRITE);
6963 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6964 }
6965
6966 /**
6967 * t4_early_init - ask FW to initialize the device
6968 * @adap: the adapter
6969 * @mbox: mailbox to use for the FW command
6970 *
6971 * Issues a command to FW to partially initialize the device. This
6972 * performs initialization that generally doesn't depend on user input.
6973 */
t4_early_init(struct adapter * adap,unsigned int mbox)6974 int t4_early_init(struct adapter *adap, unsigned int mbox)
6975 {
6976 struct fw_initialize_cmd c;
6977
6978 memset(&c, 0, sizeof(c));
6979 INIT_CMD(c, INITIALIZE, WRITE);
6980 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6981 }
6982
6983 /**
6984 * t4_fw_reset - issue a reset to FW
6985 * @adap: the adapter
6986 * @mbox: mailbox to use for the FW command
6987 * @reset: specifies the type of reset to perform
6988 *
6989 * Issues a reset command of the specified type to FW.
6990 */
t4_fw_reset(struct adapter * adap,unsigned int mbox,int reset)6991 int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
6992 {
6993 struct fw_reset_cmd c;
6994
6995 memset(&c, 0, sizeof(c));
6996 INIT_CMD(c, RESET, WRITE);
6997 c.val = cpu_to_be32(reset);
6998 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
6999 }
7000
7001 /**
7002 * t4_fw_halt - issue a reset/halt to FW and put uP into RESET
7003 * @adap: the adapter
7004 * @mbox: mailbox to use for the FW RESET command (if desired)
7005 * @force: force uP into RESET even if FW RESET command fails
7006 *
7007 * Issues a RESET command to firmware (if desired) with a HALT indication
7008 * and then puts the microprocessor into RESET state. The RESET command
7009 * will only be issued if a legitimate mailbox is provided (mbox <=
7010 * PCIE_FW_MASTER_M).
7011 *
7012 * This is generally used in order for the host to safely manipulate the
7013 * adapter without fear of conflicting with whatever the firmware might
7014 * be doing. The only way out of this state is to RESTART the firmware
7015 * ...
7016 */
t4_fw_halt(struct adapter * adap,unsigned int mbox,int force)7017 static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
7018 {
7019 int ret = 0;
7020
7021 /*
7022 * If a legitimate mailbox is provided, issue a RESET command
7023 * with a HALT indication.
7024 */
7025 if (mbox <= PCIE_FW_MASTER_M) {
7026 struct fw_reset_cmd c;
7027
7028 memset(&c, 0, sizeof(c));
7029 INIT_CMD(c, RESET, WRITE);
7030 c.val = cpu_to_be32(PIORST_F | PIORSTMODE_F);
7031 c.halt_pkd = cpu_to_be32(FW_RESET_CMD_HALT_F);
7032 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
7033 }
7034
7035 /*
7036 * Normally we won't complete the operation if the firmware RESET
7037 * command fails but if our caller insists we'll go ahead and put the
7038 * uP into RESET. This can be useful if the firmware is hung or even
7039 * missing ... We'll have to take the risk of putting the uP into
7040 * RESET without the cooperation of firmware in that case.
7041 *
7042 * We also force the firmware's HALT flag to be on in case we bypassed
7043 * the firmware RESET command above or we're dealing with old firmware
7044 * which doesn't have the HALT capability. This will serve as a flag
7045 * for the incoming firmware to know that it's coming out of a HALT
7046 * rather than a RESET ... if it's new enough to understand that ...
7047 */
7048 if (ret == 0 || force) {
7049 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F);
7050 t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F,
7051 PCIE_FW_HALT_F);
7052 }
7053
7054 /*
7055 * And we always return the result of the firmware RESET command
7056 * even when we force the uP into RESET ...
7057 */
7058 return ret;
7059 }
7060
7061 /**
7062 * t4_fw_restart - restart the firmware by taking the uP out of RESET
7063 * @adap: the adapter
7064 * @mbox: mailbox to use for the FW command
7065 * @reset: if we want to do a RESET to restart things
7066 *
7067 * Restart firmware previously halted by t4_fw_halt(). On successful
7068 * return the previous PF Master remains as the new PF Master and there
7069 * is no need to issue a new HELLO command, etc.
7070 *
7071 * We do this in two ways:
7072 *
7073 * 1. If we're dealing with newer firmware we'll simply want to take
7074 * the chip's microprocessor out of RESET. This will cause the
7075 * firmware to start up from its start vector. And then we'll loop
7076 * until the firmware indicates it's started again (PCIE_FW.HALT
7077 * reset to 0) or we timeout.
7078 *
7079 * 2. If we're dealing with older firmware then we'll need to RESET
7080 * the chip since older firmware won't recognize the PCIE_FW.HALT
7081 * flag and automatically RESET itself on startup.
7082 */
t4_fw_restart(struct adapter * adap,unsigned int mbox,int reset)7083 static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
7084 {
7085 if (reset) {
7086 /*
7087 * Since we're directing the RESET instead of the firmware
7088 * doing it automatically, we need to clear the PCIE_FW.HALT
7089 * bit.
7090 */
7091 t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, 0);
7092
7093 /*
7094 * If we've been given a valid mailbox, first try to get the
7095 * firmware to do the RESET. If that works, great and we can
7096 * return success. Otherwise, if we haven't been given a
7097 * valid mailbox or the RESET command failed, fall back to
7098 * hitting the chip with a hammer.
7099 */
7100 if (mbox <= PCIE_FW_MASTER_M) {
7101 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
7102 msleep(100);
7103 if (t4_fw_reset(adap, mbox,
7104 PIORST_F | PIORSTMODE_F) == 0)
7105 return 0;
7106 }
7107
7108 t4_write_reg(adap, PL_RST_A, PIORST_F | PIORSTMODE_F);
7109 msleep(2000);
7110 } else {
7111 int ms;
7112
7113 t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
7114 for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
7115 if (!(t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_HALT_F))
7116 return 0;
7117 msleep(100);
7118 ms += 100;
7119 }
7120 return -ETIMEDOUT;
7121 }
7122 return 0;
7123 }
7124
7125 /**
7126 * t4_fw_upgrade - perform all of the steps necessary to upgrade FW
7127 * @adap: the adapter
7128 * @mbox: mailbox to use for the FW RESET command (if desired)
7129 * @fw_data: the firmware image to write
7130 * @size: image size
7131 * @force: force upgrade even if firmware doesn't cooperate
7132 *
7133 * Perform all of the steps necessary for upgrading an adapter's
7134 * firmware image. Normally this requires the cooperation of the
7135 * existing firmware in order to halt all existing activities
7136 * but if an invalid mailbox token is passed in we skip that step
7137 * (though we'll still put the adapter microprocessor into RESET in
7138 * that case).
7139 *
7140 * On successful return the new firmware will have been loaded and
7141 * the adapter will have been fully RESET losing all previous setup
7142 * state. On unsuccessful return the adapter may be completely hosed ...
7143 * positive errno indicates that the adapter is ~probably~ intact, a
7144 * negative errno indicates that things are looking bad ...
7145 */
t4_fw_upgrade(struct adapter * adap,unsigned int mbox,const u8 * fw_data,unsigned int size,int force)7146 int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
7147 const u8 *fw_data, unsigned int size, int force)
7148 {
7149 const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
7150 int reset, ret;
7151
7152 if (!t4_fw_matches_chip(adap, fw_hdr))
7153 return -EINVAL;
7154
7155 /* Disable CXGB4_FW_OK flag so that mbox commands with CXGB4_FW_OK flag
7156 * set wont be sent when we are flashing FW.
7157 */
7158 adap->flags &= ~CXGB4_FW_OK;
7159
7160 ret = t4_fw_halt(adap, mbox, force);
7161 if (ret < 0 && !force)
7162 goto out;
7163
7164 ret = t4_load_fw(adap, fw_data, size);
7165 if (ret < 0)
7166 goto out;
7167
7168 /*
7169 * If there was a Firmware Configuration File stored in FLASH,
7170 * there's a good chance that it won't be compatible with the new
7171 * Firmware. In order to prevent difficult to diagnose adapter
7172 * initialization issues, we clear out the Firmware Configuration File
7173 * portion of the FLASH . The user will need to re-FLASH a new
7174 * Firmware Configuration File which is compatible with the new
7175 * Firmware if that's desired.
7176 */
7177 (void)t4_load_cfg(adap, NULL, 0);
7178
7179 /*
7180 * Older versions of the firmware don't understand the new
7181 * PCIE_FW.HALT flag and so won't know to perform a RESET when they
7182 * restart. So for newly loaded older firmware we'll have to do the
7183 * RESET for it so it starts up on a clean slate. We can tell if
7184 * the newly loaded firmware will handle this right by checking
7185 * its header flags to see if it advertises the capability.
7186 */
7187 reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
7188 ret = t4_fw_restart(adap, mbox, reset);
7189
7190 /* Grab potentially new Firmware Device Log parameters so we can see
7191 * how healthy the new Firmware is. It's okay to contact the new
7192 * Firmware for these parameters even though, as far as it's
7193 * concerned, we've never said "HELLO" to it ...
7194 */
7195 (void)t4_init_devlog_params(adap);
7196 out:
7197 adap->flags |= CXGB4_FW_OK;
7198 return ret;
7199 }
7200
7201 /**
7202 * t4_fl_pkt_align - return the fl packet alignment
7203 * @adap: the adapter
7204 *
7205 * T4 has a single field to specify the packing and padding boundary.
7206 * T5 onwards has separate fields for this and hence the alignment for
7207 * next packet offset is maximum of these two.
7208 *
7209 */
t4_fl_pkt_align(struct adapter * adap)7210 int t4_fl_pkt_align(struct adapter *adap)
7211 {
7212 u32 sge_control, sge_control2;
7213 unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;
7214
7215 sge_control = t4_read_reg(adap, SGE_CONTROL_A);
7216
7217 /* T4 uses a single control field to specify both the PCIe Padding and
7218 * Packing Boundary. T5 introduced the ability to specify these
7219 * separately. The actual Ingress Packet Data alignment boundary
7220 * within Packed Buffer Mode is the maximum of these two
7221 * specifications. (Note that it makes no real practical sense to
7222 * have the Padding Boundary be larger than the Packing Boundary but you
7223 * could set the chip up that way and, in fact, legacy T4 code would
7224 * end doing this because it would initialize the Padding Boundary and
7225 * leave the Packing Boundary initialized to 0 (16 bytes).)
7226 * Padding Boundary values in T6 starts from 8B,
7227 * where as it is 32B for T4 and T5.
7228 */
7229 if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
7230 ingpad_shift = INGPADBOUNDARY_SHIFT_X;
7231 else
7232 ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;
7233
7234 ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift);
7235
7236 fl_align = ingpadboundary;
7237 if (!is_t4(adap->params.chip)) {
7238 /* T5 has a weird interpretation of one of the PCIe Packing
7239 * Boundary values. No idea why ...
7240 */
7241 sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
7242 ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
7243 if (ingpackboundary == INGPACKBOUNDARY_16B_X)
7244 ingpackboundary = 16;
7245 else
7246 ingpackboundary = 1 << (ingpackboundary +
7247 INGPACKBOUNDARY_SHIFT_X);
7248
7249 fl_align = max(ingpadboundary, ingpackboundary);
7250 }
7251 return fl_align;
7252 }
7253
7254 /**
7255 * t4_fixup_host_params - fix up host-dependent parameters
7256 * @adap: the adapter
7257 * @page_size: the host's Base Page Size
7258 * @cache_line_size: the host's Cache Line Size
7259 *
7260 * Various registers in T4 contain values which are dependent on the
7261 * host's Base Page and Cache Line Sizes. This function will fix all of
7262 * those registers with the appropriate values as passed in ...
7263 */
t4_fixup_host_params(struct adapter * adap,unsigned int page_size,unsigned int cache_line_size)7264 int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
7265 unsigned int cache_line_size)
7266 {
7267 unsigned int page_shift = fls(page_size) - 1;
7268 unsigned int sge_hps = page_shift - 10;
7269 unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
7270 unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
7271 unsigned int fl_align_log = fls(fl_align) - 1;
7272
7273 t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A,
7274 HOSTPAGESIZEPF0_V(sge_hps) |
7275 HOSTPAGESIZEPF1_V(sge_hps) |
7276 HOSTPAGESIZEPF2_V(sge_hps) |
7277 HOSTPAGESIZEPF3_V(sge_hps) |
7278 HOSTPAGESIZEPF4_V(sge_hps) |
7279 HOSTPAGESIZEPF5_V(sge_hps) |
7280 HOSTPAGESIZEPF6_V(sge_hps) |
7281 HOSTPAGESIZEPF7_V(sge_hps));
7282
7283 if (is_t4(adap->params.chip)) {
7284 t4_set_reg_field(adap, SGE_CONTROL_A,
7285 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
7286 EGRSTATUSPAGESIZE_F,
7287 INGPADBOUNDARY_V(fl_align_log -
7288 INGPADBOUNDARY_SHIFT_X) |
7289 EGRSTATUSPAGESIZE_V(stat_len != 64));
7290 } else {
7291 unsigned int pack_align;
7292 unsigned int ingpad, ingpack;
7293
7294 /* T5 introduced the separation of the Free List Padding and
7295 * Packing Boundaries. Thus, we can select a smaller Padding
7296 * Boundary to avoid uselessly chewing up PCIe Link and Memory
7297 * Bandwidth, and use a Packing Boundary which is large enough
7298 * to avoid false sharing between CPUs, etc.
7299 *
7300 * For the PCI Link, the smaller the Padding Boundary the
7301 * better. For the Memory Controller, a smaller Padding
7302 * Boundary is better until we cross under the Memory Line
7303 * Size (the minimum unit of transfer to/from Memory). If we
7304 * have a Padding Boundary which is smaller than the Memory
7305 * Line Size, that'll involve a Read-Modify-Write cycle on the
7306 * Memory Controller which is never good.
7307 */
7308
7309 /* We want the Packing Boundary to be based on the Cache Line
7310 * Size in order to help avoid False Sharing performance
7311 * issues between CPUs, etc. We also want the Packing
7312 * Boundary to incorporate the PCI-E Maximum Payload Size. We
7313 * get best performance when the Packing Boundary is a
7314 * multiple of the Maximum Payload Size.
7315 */
7316 pack_align = fl_align;
7317 if (pci_is_pcie(adap->pdev)) {
7318 unsigned int mps, mps_log;
7319 u16 devctl;
7320
7321 /* The PCIe Device Control Maximum Payload Size field
7322 * [bits 7:5] encodes sizes as powers of 2 starting at
7323 * 128 bytes.
7324 */
7325 pcie_capability_read_word(adap->pdev, PCI_EXP_DEVCTL,
7326 &devctl);
7327 mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
7328 mps = 1 << mps_log;
7329 if (mps > pack_align)
7330 pack_align = mps;
7331 }
7332
7333 /* N.B. T5/T6 have a crazy special interpretation of the "0"
7334 * value for the Packing Boundary. This corresponds to 16
7335 * bytes instead of the expected 32 bytes. So if we want 32
7336 * bytes, the best we can really do is 64 bytes ...
7337 */
7338 if (pack_align <= 16) {
7339 ingpack = INGPACKBOUNDARY_16B_X;
7340 fl_align = 16;
7341 } else if (pack_align == 32) {
7342 ingpack = INGPACKBOUNDARY_64B_X;
7343 fl_align = 64;
7344 } else {
7345 unsigned int pack_align_log = fls(pack_align) - 1;
7346
7347 ingpack = pack_align_log - INGPACKBOUNDARY_SHIFT_X;
7348 fl_align = pack_align;
7349 }
7350
7351 /* Use the smallest Ingress Padding which isn't smaller than
7352 * the Memory Controller Read/Write Size. We'll take that as
7353 * being 8 bytes since we don't know of any system with a
7354 * wider Memory Controller Bus Width.
7355 */
7356 if (is_t5(adap->params.chip))
7357 ingpad = INGPADBOUNDARY_32B_X;
7358 else
7359 ingpad = T6_INGPADBOUNDARY_8B_X;
7360
7361 t4_set_reg_field(adap, SGE_CONTROL_A,
7362 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
7363 EGRSTATUSPAGESIZE_F,
7364 INGPADBOUNDARY_V(ingpad) |
7365 EGRSTATUSPAGESIZE_V(stat_len != 64));
7366 t4_set_reg_field(adap, SGE_CONTROL2_A,
7367 INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
7368 INGPACKBOUNDARY_V(ingpack));
7369 }
7370 /*
7371 * Adjust various SGE Free List Host Buffer Sizes.
7372 *
7373 * This is something of a crock since we're using fixed indices into
7374 * the array which are also known by the sge.c code and the T4
7375 * Firmware Configuration File. We need to come up with a much better
7376 * approach to managing this array. For now, the first four entries
7377 * are:
7378 *
7379 * 0: Host Page Size
7380 * 1: 64KB
7381 * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
7382 * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
7383 *
7384 * For the single-MTU buffers in unpacked mode we need to include
7385 * space for the SGE Control Packet Shift, 14 byte Ethernet header,
7386 * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
7387 * Padding boundary. All of these are accommodated in the Factory
7388 * Default Firmware Configuration File but we need to adjust it for
7389 * this host's cache line size.
7390 */
7391 t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A, page_size);
7392 t4_write_reg(adap, SGE_FL_BUFFER_SIZE2_A,
7393 (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2_A) + fl_align-1)
7394 & ~(fl_align-1));
7395 t4_write_reg(adap, SGE_FL_BUFFER_SIZE3_A,
7396 (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3_A) + fl_align-1)
7397 & ~(fl_align-1));
7398
7399 t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(page_shift - 12));
7400
7401 return 0;
7402 }
7403
7404 /**
7405 * t4_fw_initialize - ask FW to initialize the device
7406 * @adap: the adapter
7407 * @mbox: mailbox to use for the FW command
7408 *
7409 * Issues a command to FW to partially initialize the device. This
7410 * performs initialization that generally doesn't depend on user input.
7411 */
t4_fw_initialize(struct adapter * adap,unsigned int mbox)7412 int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
7413 {
7414 struct fw_initialize_cmd c;
7415
7416 memset(&c, 0, sizeof(c));
7417 INIT_CMD(c, INITIALIZE, WRITE);
7418 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
7419 }
7420
7421 /**
7422 * t4_query_params_rw - query FW or device parameters
7423 * @adap: the adapter
7424 * @mbox: mailbox to use for the FW command
7425 * @pf: the PF
7426 * @vf: the VF
7427 * @nparams: the number of parameters
7428 * @params: the parameter names
7429 * @val: the parameter values
7430 * @rw: Write and read flag
7431 * @sleep_ok: if true, we may sleep awaiting mbox cmd completion
7432 *
7433 * Reads the value of FW or device parameters. Up to 7 parameters can be
7434 * queried at once.
7435 */
t4_query_params_rw(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val,int rw,bool sleep_ok)7436 int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf,
7437 unsigned int vf, unsigned int nparams, const u32 *params,
7438 u32 *val, int rw, bool sleep_ok)
7439 {
7440 int i, ret;
7441 struct fw_params_cmd c;
7442 __be32 *p = &c.param[0].mnem;
7443
7444 if (nparams > 7)
7445 return -EINVAL;
7446
7447 memset(&c, 0, sizeof(c));
7448 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
7449 FW_CMD_REQUEST_F | FW_CMD_READ_F |
7450 FW_PARAMS_CMD_PFN_V(pf) |
7451 FW_PARAMS_CMD_VFN_V(vf));
7452 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7453
7454 for (i = 0; i < nparams; i++) {
7455 *p++ = cpu_to_be32(*params++);
7456 if (rw)
7457 *p = cpu_to_be32(*(val + i));
7458 p++;
7459 }
7460
7461 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
7462 if (ret == 0)
7463 for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
7464 *val++ = be32_to_cpu(*p);
7465 return ret;
7466 }
7467
t4_query_params(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val)7468 int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
7469 unsigned int vf, unsigned int nparams, const u32 *params,
7470 u32 *val)
7471 {
7472 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
7473 true);
7474 }
7475
t4_query_params_ns(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,u32 * val)7476 int t4_query_params_ns(struct adapter *adap, unsigned int mbox, unsigned int pf,
7477 unsigned int vf, unsigned int nparams, const u32 *params,
7478 u32 *val)
7479 {
7480 return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
7481 false);
7482 }
7483
7484 /**
7485 * t4_set_params_timeout - sets FW or device parameters
7486 * @adap: the adapter
7487 * @mbox: mailbox to use for the FW command
7488 * @pf: the PF
7489 * @vf: the VF
7490 * @nparams: the number of parameters
7491 * @params: the parameter names
7492 * @val: the parameter values
7493 * @timeout: the timeout time
7494 *
7495 * Sets the value of FW or device parameters. Up to 7 parameters can be
7496 * specified at once.
7497 */
t4_set_params_timeout(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,const u32 * val,int timeout)7498 int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
7499 unsigned int pf, unsigned int vf,
7500 unsigned int nparams, const u32 *params,
7501 const u32 *val, int timeout)
7502 {
7503 struct fw_params_cmd c;
7504 __be32 *p = &c.param[0].mnem;
7505
7506 if (nparams > 7)
7507 return -EINVAL;
7508
7509 memset(&c, 0, sizeof(c));
7510 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
7511 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7512 FW_PARAMS_CMD_PFN_V(pf) |
7513 FW_PARAMS_CMD_VFN_V(vf));
7514 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7515
7516 while (nparams--) {
7517 *p++ = cpu_to_be32(*params++);
7518 *p++ = cpu_to_be32(*val++);
7519 }
7520
7521 return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
7522 }
7523
7524 /**
7525 * t4_set_params - sets FW or device parameters
7526 * @adap: the adapter
7527 * @mbox: mailbox to use for the FW command
7528 * @pf: the PF
7529 * @vf: the VF
7530 * @nparams: the number of parameters
7531 * @params: the parameter names
7532 * @val: the parameter values
7533 *
7534 * Sets the value of FW or device parameters. Up to 7 parameters can be
7535 * specified at once.
7536 */
t4_set_params(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int nparams,const u32 * params,const u32 * val)7537 int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
7538 unsigned int vf, unsigned int nparams, const u32 *params,
7539 const u32 *val)
7540 {
7541 return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
7542 FW_CMD_MAX_TIMEOUT);
7543 }
7544
7545 /**
7546 * t4_cfg_pfvf - configure PF/VF resource limits
7547 * @adap: the adapter
7548 * @mbox: mailbox to use for the FW command
7549 * @pf: the PF being configured
7550 * @vf: the VF being configured
7551 * @txq: the max number of egress queues
7552 * @txq_eth_ctrl: the max number of egress Ethernet or control queues
7553 * @rxqi: the max number of interrupt-capable ingress queues
7554 * @rxq: the max number of interruptless ingress queues
7555 * @tc: the PCI traffic class
7556 * @vi: the max number of virtual interfaces
7557 * @cmask: the channel access rights mask for the PF/VF
7558 * @pmask: the port access rights mask for the PF/VF
7559 * @nexact: the maximum number of exact MPS filters
7560 * @rcaps: read capabilities
7561 * @wxcaps: write/execute capabilities
7562 *
7563 * Configures resource limits and capabilities for a physical or virtual
7564 * function.
7565 */
t4_cfg_pfvf(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int txq,unsigned int txq_eth_ctrl,unsigned int rxqi,unsigned int rxq,unsigned int tc,unsigned int vi,unsigned int cmask,unsigned int pmask,unsigned int nexact,unsigned int rcaps,unsigned int wxcaps)7566 int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
7567 unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
7568 unsigned int rxqi, unsigned int rxq, unsigned int tc,
7569 unsigned int vi, unsigned int cmask, unsigned int pmask,
7570 unsigned int nexact, unsigned int rcaps, unsigned int wxcaps)
7571 {
7572 struct fw_pfvf_cmd c;
7573
7574 memset(&c, 0, sizeof(c));
7575 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) | FW_CMD_REQUEST_F |
7576 FW_CMD_WRITE_F | FW_PFVF_CMD_PFN_V(pf) |
7577 FW_PFVF_CMD_VFN_V(vf));
7578 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7579 c.niqflint_niq = cpu_to_be32(FW_PFVF_CMD_NIQFLINT_V(rxqi) |
7580 FW_PFVF_CMD_NIQ_V(rxq));
7581 c.type_to_neq = cpu_to_be32(FW_PFVF_CMD_CMASK_V(cmask) |
7582 FW_PFVF_CMD_PMASK_V(pmask) |
7583 FW_PFVF_CMD_NEQ_V(txq));
7584 c.tc_to_nexactf = cpu_to_be32(FW_PFVF_CMD_TC_V(tc) |
7585 FW_PFVF_CMD_NVI_V(vi) |
7586 FW_PFVF_CMD_NEXACTF_V(nexact));
7587 c.r_caps_to_nethctrl = cpu_to_be32(FW_PFVF_CMD_R_CAPS_V(rcaps) |
7588 FW_PFVF_CMD_WX_CAPS_V(wxcaps) |
7589 FW_PFVF_CMD_NETHCTRL_V(txq_eth_ctrl));
7590 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
7591 }
7592
7593 /**
7594 * t4_alloc_vi - allocate a virtual interface
7595 * @adap: the adapter
7596 * @mbox: mailbox to use for the FW command
7597 * @port: physical port associated with the VI
7598 * @pf: the PF owning the VI
7599 * @vf: the VF owning the VI
7600 * @nmac: number of MAC addresses needed (1 to 5)
7601 * @mac: the MAC addresses of the VI
7602 * @rss_size: size of RSS table slice associated with this VI
7603 * @vivld: the destination to store the VI Valid value.
7604 * @vin: the destination to store the VIN value.
7605 *
7606 * Allocates a virtual interface for the given physical port. If @mac is
7607 * not %NULL it contains the MAC addresses of the VI as assigned by FW.
7608 * @mac should be large enough to hold @nmac Ethernet addresses, they are
7609 * stored consecutively so the space needed is @nmac * 6 bytes.
7610 * Returns a negative error number or the non-negative VI id.
7611 */
t4_alloc_vi(struct adapter * adap,unsigned int mbox,unsigned int port,unsigned int pf,unsigned int vf,unsigned int nmac,u8 * mac,unsigned int * rss_size,u8 * vivld,u8 * vin)7612 int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
7613 unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
7614 unsigned int *rss_size, u8 *vivld, u8 *vin)
7615 {
7616 int ret;
7617 struct fw_vi_cmd c;
7618
7619 memset(&c, 0, sizeof(c));
7620 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F |
7621 FW_CMD_WRITE_F | FW_CMD_EXEC_F |
7622 FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf));
7623 c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_ALLOC_F | FW_LEN16(c));
7624 c.portid_pkd = FW_VI_CMD_PORTID_V(port);
7625 c.nmac = nmac - 1;
7626
7627 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
7628 if (ret)
7629 return ret;
7630
7631 if (mac) {
7632 memcpy(mac, c.mac, sizeof(c.mac));
7633 switch (nmac) {
7634 case 5:
7635 memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
7636 fallthrough;
7637 case 4:
7638 memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
7639 fallthrough;
7640 case 3:
7641 memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
7642 fallthrough;
7643 case 2:
7644 memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
7645 }
7646 }
7647 if (rss_size)
7648 *rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(c.rsssize_pkd));
7649
7650 if (vivld)
7651 *vivld = FW_VI_CMD_VFVLD_G(be32_to_cpu(c.alloc_to_len16));
7652
7653 if (vin)
7654 *vin = FW_VI_CMD_VIN_G(be32_to_cpu(c.alloc_to_len16));
7655
7656 return FW_VI_CMD_VIID_G(be16_to_cpu(c.type_viid));
7657 }
7658
7659 /**
7660 * t4_free_vi - free a virtual interface
7661 * @adap: the adapter
7662 * @mbox: mailbox to use for the FW command
7663 * @pf: the PF owning the VI
7664 * @vf: the VF owning the VI
7665 * @viid: virtual interface identifiler
7666 *
7667 * Free a previously allocated virtual interface.
7668 */
t4_free_vi(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int viid)7669 int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
7670 unsigned int vf, unsigned int viid)
7671 {
7672 struct fw_vi_cmd c;
7673
7674 memset(&c, 0, sizeof(c));
7675 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) |
7676 FW_CMD_REQUEST_F |
7677 FW_CMD_EXEC_F |
7678 FW_VI_CMD_PFN_V(pf) |
7679 FW_VI_CMD_VFN_V(vf));
7680 c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_FREE_F | FW_LEN16(c));
7681 c.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(viid));
7682
7683 return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
7684 }
7685
7686 /**
7687 * t4_set_rxmode - set Rx properties of a virtual interface
7688 * @adap: the adapter
7689 * @mbox: mailbox to use for the FW command
7690 * @viid: the VI id
7691 * @viid_mirror: the mirror VI id
7692 * @mtu: the new MTU or -1
7693 * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
7694 * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
7695 * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
7696 * @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change
7697 * @sleep_ok: if true we may sleep while awaiting command completion
7698 *
7699 * Sets Rx properties of a virtual interface.
7700 */
t4_set_rxmode(struct adapter * adap,unsigned int mbox,unsigned int viid,unsigned int viid_mirror,int mtu,int promisc,int all_multi,int bcast,int vlanex,bool sleep_ok)7701 int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
7702 unsigned int viid_mirror, int mtu, int promisc, int all_multi,
7703 int bcast, int vlanex, bool sleep_ok)
7704 {
7705 struct fw_vi_rxmode_cmd c, c_mirror;
7706 int ret;
7707
7708 /* convert to FW values */
7709 if (mtu < 0)
7710 mtu = FW_RXMODE_MTU_NO_CHG;
7711 if (promisc < 0)
7712 promisc = FW_VI_RXMODE_CMD_PROMISCEN_M;
7713 if (all_multi < 0)
7714 all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M;
7715 if (bcast < 0)
7716 bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M;
7717 if (vlanex < 0)
7718 vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M;
7719
7720 memset(&c, 0, sizeof(c));
7721 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) |
7722 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7723 FW_VI_RXMODE_CMD_VIID_V(viid));
7724 c.retval_len16 = cpu_to_be32(FW_LEN16(c));
7725 c.mtu_to_vlanexen =
7726 cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu) |
7727 FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) |
7728 FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) |
7729 FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) |
7730 FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex));
7731
7732 if (viid_mirror) {
7733 memcpy(&c_mirror, &c, sizeof(c_mirror));
7734 c_mirror.op_to_viid =
7735 cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) |
7736 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7737 FW_VI_RXMODE_CMD_VIID_V(viid_mirror));
7738 }
7739
7740 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
7741 if (ret)
7742 return ret;
7743
7744 if (viid_mirror)
7745 ret = t4_wr_mbox_meat(adap, mbox, &c_mirror, sizeof(c_mirror),
7746 NULL, sleep_ok);
7747
7748 return ret;
7749 }
7750
7751 /**
7752 * t4_free_encap_mac_filt - frees MPS entry at given index
7753 * @adap: the adapter
7754 * @viid: the VI id
7755 * @idx: index of MPS entry to be freed
7756 * @sleep_ok: call is allowed to sleep
7757 *
7758 * Frees the MPS entry at supplied index
7759 *
7760 * Returns a negative error number or zero on success
7761 */
t4_free_encap_mac_filt(struct adapter * adap,unsigned int viid,int idx,bool sleep_ok)7762 int t4_free_encap_mac_filt(struct adapter *adap, unsigned int viid,
7763 int idx, bool sleep_ok)
7764 {
7765 struct fw_vi_mac_exact *p;
7766 struct fw_vi_mac_cmd c;
7767 int ret = 0;
7768 u32 exact;
7769
7770 memset(&c, 0, sizeof(c));
7771 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7772 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7773 FW_CMD_EXEC_V(0) |
7774 FW_VI_MAC_CMD_VIID_V(viid));
7775 exact = FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC);
7776 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
7777 exact |
7778 FW_CMD_LEN16_V(1));
7779 p = c.u.exact;
7780 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7781 FW_VI_MAC_CMD_IDX_V(idx));
7782 eth_zero_addr(p->macaddr);
7783 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7784 return ret;
7785 }
7786
7787 /**
7788 * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
7789 * @adap: the adapter
7790 * @viid: the VI id
7791 * @addr: the MAC address
7792 * @mask: the mask
7793 * @idx: index of the entry in mps tcam
7794 * @lookup_type: MAC address for inner (1) or outer (0) header
7795 * @port_id: the port index
7796 * @sleep_ok: call is allowed to sleep
7797 *
7798 * Removes the mac entry at the specified index using raw mac interface.
7799 *
7800 * Returns a negative error number on failure.
7801 */
t4_free_raw_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int idx,u8 lookup_type,u8 port_id,bool sleep_ok)7802 int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
7803 const u8 *addr, const u8 *mask, unsigned int idx,
7804 u8 lookup_type, u8 port_id, bool sleep_ok)
7805 {
7806 struct fw_vi_mac_cmd c;
7807 struct fw_vi_mac_raw *p = &c.u.raw;
7808 u32 val;
7809
7810 memset(&c, 0, sizeof(c));
7811 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7812 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7813 FW_CMD_EXEC_V(0) |
7814 FW_VI_MAC_CMD_VIID_V(viid));
7815 val = FW_CMD_LEN16_V(1) |
7816 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
7817 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
7818 FW_CMD_LEN16_V(val));
7819
7820 p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx) |
7821 FW_VI_MAC_ID_BASED_FREE);
7822
7823 /* Lookup Type. Outer header: 0, Inner header: 1 */
7824 p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
7825 DATAPORTNUM_V(port_id));
7826 /* Lookup mask and port mask */
7827 p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
7828 DATAPORTNUM_V(DATAPORTNUM_M));
7829
7830 /* Copy the address and the mask */
7831 memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
7832 memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);
7833
7834 return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7835 }
7836
7837 /**
7838 * t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support
7839 * @adap: the adapter
7840 * @viid: the VI id
7841 * @addr: the MAC address
7842 * @mask: the mask
7843 * @vni: the VNI id for the tunnel protocol
7844 * @vni_mask: mask for the VNI id
7845 * @dip_hit: to enable DIP match for the MPS entry
7846 * @lookup_type: MAC address for inner (1) or outer (0) header
7847 * @sleep_ok: call is allowed to sleep
7848 *
7849 * Allocates an MPS entry with specified MAC address and VNI value.
7850 *
7851 * Returns a negative error number or the allocated index for this mac.
7852 */
t4_alloc_encap_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int vni,unsigned int vni_mask,u8 dip_hit,u8 lookup_type,bool sleep_ok)7853 int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid,
7854 const u8 *addr, const u8 *mask, unsigned int vni,
7855 unsigned int vni_mask, u8 dip_hit, u8 lookup_type,
7856 bool sleep_ok)
7857 {
7858 struct fw_vi_mac_cmd c;
7859 struct fw_vi_mac_vni *p = c.u.exact_vni;
7860 int ret = 0;
7861 u32 val;
7862
7863 memset(&c, 0, sizeof(c));
7864 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7865 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7866 FW_VI_MAC_CMD_VIID_V(viid));
7867 val = FW_CMD_LEN16_V(1) |
7868 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC_VNI);
7869 c.freemacs_to_len16 = cpu_to_be32(val);
7870 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7871 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC));
7872 memcpy(p->macaddr, addr, sizeof(p->macaddr));
7873 memcpy(p->macaddr_mask, mask, sizeof(p->macaddr_mask));
7874
7875 p->lookup_type_to_vni =
7876 cpu_to_be32(FW_VI_MAC_CMD_VNI_V(vni) |
7877 FW_VI_MAC_CMD_DIP_HIT_V(dip_hit) |
7878 FW_VI_MAC_CMD_LOOKUP_TYPE_V(lookup_type));
7879 p->vni_mask_pkd = cpu_to_be32(FW_VI_MAC_CMD_VNI_MASK_V(vni_mask));
7880 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7881 if (ret == 0)
7882 ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
7883 return ret;
7884 }
7885
7886 /**
7887 * t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam
7888 * @adap: the adapter
7889 * @viid: the VI id
7890 * @addr: the MAC address
7891 * @mask: the mask
7892 * @idx: index at which to add this entry
7893 * @lookup_type: MAC address for inner (1) or outer (0) header
7894 * @port_id: the port index
7895 * @sleep_ok: call is allowed to sleep
7896 *
7897 * Adds the mac entry at the specified index using raw mac interface.
7898 *
7899 * Returns a negative error number or the allocated index for this mac.
7900 */
t4_alloc_raw_mac_filt(struct adapter * adap,unsigned int viid,const u8 * addr,const u8 * mask,unsigned int idx,u8 lookup_type,u8 port_id,bool sleep_ok)7901 int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
7902 const u8 *addr, const u8 *mask, unsigned int idx,
7903 u8 lookup_type, u8 port_id, bool sleep_ok)
7904 {
7905 int ret = 0;
7906 struct fw_vi_mac_cmd c;
7907 struct fw_vi_mac_raw *p = &c.u.raw;
7908 u32 val;
7909
7910 memset(&c, 0, sizeof(c));
7911 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7912 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
7913 FW_VI_MAC_CMD_VIID_V(viid));
7914 val = FW_CMD_LEN16_V(1) |
7915 FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
7916 c.freemacs_to_len16 = cpu_to_be32(val);
7917
7918 /* Specify that this is an inner mac address */
7919 p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx));
7920
7921 /* Lookup Type. Outer header: 0, Inner header: 1 */
7922 p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
7923 DATAPORTNUM_V(port_id));
7924 /* Lookup mask and port mask */
7925 p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
7926 DATAPORTNUM_V(DATAPORTNUM_M));
7927
7928 /* Copy the address and the mask */
7929 memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
7930 memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);
7931
7932 ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
7933 if (ret == 0) {
7934 ret = FW_VI_MAC_CMD_RAW_IDX_G(be32_to_cpu(p->raw_idx_pkd));
7935 if (ret != idx)
7936 ret = -ENOMEM;
7937 }
7938
7939 return ret;
7940 }
7941
7942 /**
7943 * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses
7944 * @adap: the adapter
7945 * @mbox: mailbox to use for the FW command
7946 * @viid: the VI id
7947 * @free: if true any existing filters for this VI id are first removed
7948 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
7949 * @addr: the MAC address(es)
7950 * @idx: where to store the index of each allocated filter
7951 * @hash: pointer to hash address filter bitmap
7952 * @sleep_ok: call is allowed to sleep
7953 *
7954 * Allocates an exact-match filter for each of the supplied addresses and
7955 * sets it to the corresponding address. If @idx is not %NULL it should
7956 * have at least @naddr entries, each of which will be set to the index of
7957 * the filter allocated for the corresponding MAC address. If a filter
7958 * could not be allocated for an address its index is set to 0xffff.
7959 * If @hash is not %NULL addresses that fail to allocate an exact filter
7960 * are hashed and update the hash filter bitmap pointed at by @hash.
7961 *
7962 * Returns a negative error number or the number of filters allocated.
7963 */
t4_alloc_mac_filt(struct adapter * adap,unsigned int mbox,unsigned int viid,bool free,unsigned int naddr,const u8 ** addr,u16 * idx,u64 * hash,bool sleep_ok)7964 int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
7965 unsigned int viid, bool free, unsigned int naddr,
7966 const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok)
7967 {
7968 int offset, ret = 0;
7969 struct fw_vi_mac_cmd c;
7970 unsigned int nfilters = 0;
7971 unsigned int max_naddr = adap->params.arch.mps_tcam_size;
7972 unsigned int rem = naddr;
7973
7974 if (naddr > max_naddr)
7975 return -EINVAL;
7976
7977 for (offset = 0; offset < naddr ; /**/) {
7978 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) ?
7979 rem : ARRAY_SIZE(c.u.exact));
7980 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
7981 u.exact[fw_naddr]), 16);
7982 struct fw_vi_mac_exact *p;
7983 int i;
7984
7985 memset(&c, 0, sizeof(c));
7986 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
7987 FW_CMD_REQUEST_F |
7988 FW_CMD_WRITE_F |
7989 FW_CMD_EXEC_V(free) |
7990 FW_VI_MAC_CMD_VIID_V(viid));
7991 c.freemacs_to_len16 =
7992 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free) |
7993 FW_CMD_LEN16_V(len16));
7994
7995 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
7996 p->valid_to_idx =
7997 cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
7998 FW_VI_MAC_CMD_IDX_V(
7999 FW_VI_MAC_ADD_MAC));
8000 memcpy(p->macaddr, addr[offset + i],
8001 sizeof(p->macaddr));
8002 }
8003
8004 /* It's okay if we run out of space in our MAC address arena.
8005 * Some of the addresses we submit may get stored so we need
8006 * to run through the reply to see what the results were ...
8007 */
8008 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
8009 if (ret && ret != -FW_ENOMEM)
8010 break;
8011
8012 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
8013 u16 index = FW_VI_MAC_CMD_IDX_G(
8014 be16_to_cpu(p->valid_to_idx));
8015
8016 if (idx)
8017 idx[offset + i] = (index >= max_naddr ?
8018 0xffff : index);
8019 if (index < max_naddr)
8020 nfilters++;
8021 else if (hash)
8022 *hash |= (1ULL <<
8023 hash_mac_addr(addr[offset + i]));
8024 }
8025
8026 free = false;
8027 offset += fw_naddr;
8028 rem -= fw_naddr;
8029 }
8030
8031 if (ret == 0 || ret == -FW_ENOMEM)
8032 ret = nfilters;
8033 return ret;
8034 }
8035
8036 /**
8037 * t4_free_mac_filt - frees exact-match filters of given MAC addresses
8038 * @adap: the adapter
8039 * @mbox: mailbox to use for the FW command
8040 * @viid: the VI id
8041 * @naddr: the number of MAC addresses to allocate filters for (up to 7)
8042 * @addr: the MAC address(es)
8043 * @sleep_ok: call is allowed to sleep
8044 *
8045 * Frees the exact-match filter for each of the supplied addresses
8046 *
8047 * Returns a negative error number or the number of filters freed.
8048 */
t4_free_mac_filt(struct adapter * adap,unsigned int mbox,unsigned int viid,unsigned int naddr,const u8 ** addr,bool sleep_ok)8049 int t4_free_mac_filt(struct adapter *adap, unsigned int mbox,
8050 unsigned int viid, unsigned int naddr,
8051 const u8 **addr, bool sleep_ok)
8052 {
8053 int offset, ret = 0;
8054 struct fw_vi_mac_cmd c;
8055 unsigned int nfilters = 0;
8056 unsigned int max_naddr = is_t4(adap->params.chip) ?
8057 NUM_MPS_CLS_SRAM_L_INSTANCES :
8058 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
8059 unsigned int rem = naddr;
8060
8061 if (naddr > max_naddr)
8062 return -EINVAL;
8063
8064 for (offset = 0; offset < (int)naddr ; /**/) {
8065 unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact)
8066 ? rem
8067 : ARRAY_SIZE(c.u.exact));
8068 size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
8069 u.exact[fw_naddr]), 16);
8070 struct fw_vi_mac_exact *p;
8071 int i;
8072
8073 memset(&c, 0, sizeof(c));
8074 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
8075 FW_CMD_REQUEST_F |
8076 FW_CMD_WRITE_F |
8077 FW_CMD_EXEC_V(0) |
8078 FW_VI_MAC_CMD_VIID_V(viid));
8079 c.freemacs_to_len16 =
8080 cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
8081 FW_CMD_LEN16_V(len16));
8082
8083 for (i = 0, p = c.u.exact; i < (int)fw_naddr; i++, p++) {
8084 p->valid_to_idx = cpu_to_be16(
8085 FW_VI_MAC_CMD_VALID_F |
8086 FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_MAC_BASED_FREE));
8087 memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
8088 }
8089
8090 ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
8091 if (ret)
8092 break;
8093
8094 for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
8095 u16 index = FW_VI_MAC_CMD_IDX_G(
8096 be16_to_cpu(p->valid_to_idx));
8097
8098 if (index < max_naddr)
8099 nfilters++;
8100 }
8101
8102 offset += fw_naddr;
8103 rem -= fw_naddr;
8104 }
8105
8106 if (ret == 0)
8107 ret = nfilters;
8108 return ret;
8109 }
8110
8111 /**
8112 * t4_change_mac - modifies the exact-match filter for a MAC address
8113 * @adap: the adapter
8114 * @mbox: mailbox to use for the FW command
8115 * @viid: the VI id
8116 * @idx: index of existing filter for old value of MAC address, or -1
8117 * @addr: the new MAC address value
8118 * @persist: whether a new MAC allocation should be persistent
8119 * @smt_idx: the destination to store the new SMT index.
8120 *
8121 * Modifies an exact-match filter and sets it to the new MAC address.
8122 * Note that in general it is not possible to modify the value of a given
8123 * filter so the generic way to modify an address filter is to free the one
8124 * being used by the old address value and allocate a new filter for the
8125 * new address value. @idx can be -1 if the address is a new addition.
8126 *
8127 * Returns a negative error number or the index of the filter with the new
8128 * MAC value.
8129 */
t4_change_mac(struct adapter * adap,unsigned int mbox,unsigned int viid,int idx,const u8 * addr,bool persist,u8 * smt_idx)8130 int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
8131 int idx, const u8 *addr, bool persist, u8 *smt_idx)
8132 {
8133 int ret, mode;
8134 struct fw_vi_mac_cmd c;
8135 struct fw_vi_mac_exact *p = c.u.exact;
8136 unsigned int max_mac_addr = adap->params.arch.mps_tcam_size;
8137
8138 if (idx < 0) /* new allocation */
8139 idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
8140 mode = smt_idx ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
8141
8142 memset(&c, 0, sizeof(c));
8143 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
8144 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
8145 FW_VI_MAC_CMD_VIID_V(viid));
8146 c.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16_V(1));
8147 p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
8148 FW_VI_MAC_CMD_SMAC_RESULT_V(mode) |
8149 FW_VI_MAC_CMD_IDX_V(idx));
8150 memcpy(p->macaddr, addr, sizeof(p->macaddr));
8151
8152 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
8153 if (ret == 0) {
8154 ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
8155 if (ret >= max_mac_addr)
8156 ret = -ENOMEM;
8157 if (smt_idx) {
8158 if (adap->params.viid_smt_extn_support) {
8159 *smt_idx = FW_VI_MAC_CMD_SMTID_G
8160 (be32_to_cpu(c.op_to_viid));
8161 } else {
8162 /* In T4/T5, SMT contains 256 SMAC entries
8163 * organized in 128 rows of 2 entries each.
8164 * In T6, SMT contains 256 SMAC entries in
8165 * 256 rows.
8166 */
8167 if (CHELSIO_CHIP_VERSION(adap->params.chip) <=
8168 CHELSIO_T5)
8169 *smt_idx = (viid & FW_VIID_VIN_M) << 1;
8170 else
8171 *smt_idx = (viid & FW_VIID_VIN_M);
8172 }
8173 }
8174 }
8175 return ret;
8176 }
8177
8178 /**
8179 * t4_set_addr_hash - program the MAC inexact-match hash filter
8180 * @adap: the adapter
8181 * @mbox: mailbox to use for the FW command
8182 * @viid: the VI id
8183 * @ucast: whether the hash filter should also match unicast addresses
8184 * @vec: the value to be written to the hash filter
8185 * @sleep_ok: call is allowed to sleep
8186 *
8187 * Sets the 64-bit inexact-match hash filter for a virtual interface.
8188 */
t4_set_addr_hash(struct adapter * adap,unsigned int mbox,unsigned int viid,bool ucast,u64 vec,bool sleep_ok)8189 int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
8190 bool ucast, u64 vec, bool sleep_ok)
8191 {
8192 struct fw_vi_mac_cmd c;
8193
8194 memset(&c, 0, sizeof(c));
8195 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
8196 FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
8197 FW_VI_ENABLE_CMD_VIID_V(viid));
8198 c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F |
8199 FW_VI_MAC_CMD_HASHUNIEN_V(ucast) |
8200 FW_CMD_LEN16_V(1));
8201 c.u.hash.hashvec = cpu_to_be64(vec);
8202 return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
8203 }
8204
8205 /**
8206 * t4_enable_vi_params - enable/disable a virtual interface
8207 * @adap: the adapter
8208 * @mbox: mailbox to use for the FW command
8209 * @viid: the VI id
8210 * @rx_en: 1=enable Rx, 0=disable Rx
8211 * @tx_en: 1=enable Tx, 0=disable Tx
8212 * @dcb_en: 1=enable delivery of Data Center Bridging messages.
8213 *
8214 * Enables/disables a virtual interface. Note that setting DCB Enable
8215 * only makes sense when enabling a Virtual Interface ...
8216 */
t4_enable_vi_params(struct adapter * adap,unsigned int mbox,unsigned int viid,bool rx_en,bool tx_en,bool dcb_en)8217 int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
8218 unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
8219 {
8220 struct fw_vi_enable_cmd c;
8221
8222 memset(&c, 0, sizeof(c));
8223 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
8224 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8225 FW_VI_ENABLE_CMD_VIID_V(viid));
8226 c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en) |
8227 FW_VI_ENABLE_CMD_EEN_V(tx_en) |
8228 FW_VI_ENABLE_CMD_DCB_INFO_V(dcb_en) |
8229 FW_LEN16(c));
8230 return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
8231 }
8232
8233 /**
8234 * t4_enable_vi - enable/disable a virtual interface
8235 * @adap: the adapter
8236 * @mbox: mailbox to use for the FW command
8237 * @viid: the VI id
8238 * @rx_en: 1=enable Rx, 0=disable Rx
8239 * @tx_en: 1=enable Tx, 0=disable Tx
8240 *
8241 * Enables/disables a virtual interface.
8242 */
t4_enable_vi(struct adapter * adap,unsigned int mbox,unsigned int viid,bool rx_en,bool tx_en)8243 int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
8244 bool rx_en, bool tx_en)
8245 {
8246 return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
8247 }
8248
8249 /**
8250 * t4_enable_pi_params - enable/disable a Port's Virtual Interface
8251 * @adap: the adapter
8252 * @mbox: mailbox to use for the FW command
8253 * @pi: the Port Information structure
8254 * @rx_en: 1=enable Rx, 0=disable Rx
8255 * @tx_en: 1=enable Tx, 0=disable Tx
8256 * @dcb_en: 1=enable delivery of Data Center Bridging messages.
8257 *
8258 * Enables/disables a Port's Virtual Interface. Note that setting DCB
8259 * Enable only makes sense when enabling a Virtual Interface ...
8260 * If the Virtual Interface enable/disable operation is successful,
8261 * we notify the OS-specific code of a potential Link Status change
8262 * via the OS Contract API t4_os_link_changed().
8263 */
t4_enable_pi_params(struct adapter * adap,unsigned int mbox,struct port_info * pi,bool rx_en,bool tx_en,bool dcb_en)8264 int t4_enable_pi_params(struct adapter *adap, unsigned int mbox,
8265 struct port_info *pi,
8266 bool rx_en, bool tx_en, bool dcb_en)
8267 {
8268 int ret = t4_enable_vi_params(adap, mbox, pi->viid,
8269 rx_en, tx_en, dcb_en);
8270 if (ret)
8271 return ret;
8272 t4_os_link_changed(adap, pi->port_id,
8273 rx_en && tx_en && pi->link_cfg.link_ok);
8274 return 0;
8275 }
8276
8277 /**
8278 * t4_identify_port - identify a VI's port by blinking its LED
8279 * @adap: the adapter
8280 * @mbox: mailbox to use for the FW command
8281 * @viid: the VI id
8282 * @nblinks: how many times to blink LED at 2.5 Hz
8283 *
8284 * Identifies a VI's port by blinking its LED.
8285 */
t4_identify_port(struct adapter * adap,unsigned int mbox,unsigned int viid,unsigned int nblinks)8286 int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
8287 unsigned int nblinks)
8288 {
8289 struct fw_vi_enable_cmd c;
8290
8291 memset(&c, 0, sizeof(c));
8292 c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
8293 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8294 FW_VI_ENABLE_CMD_VIID_V(viid));
8295 c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED_F | FW_LEN16(c));
8296 c.blinkdur = cpu_to_be16(nblinks);
8297 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8298 }
8299
8300 /**
8301 * t4_iq_stop - stop an ingress queue and its FLs
8302 * @adap: the adapter
8303 * @mbox: mailbox to use for the FW command
8304 * @pf: the PF owning the queues
8305 * @vf: the VF owning the queues
8306 * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
8307 * @iqid: ingress queue id
8308 * @fl0id: FL0 queue id or 0xffff if no attached FL0
8309 * @fl1id: FL1 queue id or 0xffff if no attached FL1
8310 *
8311 * Stops an ingress queue and its associated FLs, if any. This causes
8312 * any current or future data/messages destined for these queues to be
8313 * tossed.
8314 */
t4_iq_stop(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int iqtype,unsigned int iqid,unsigned int fl0id,unsigned int fl1id)8315 int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf,
8316 unsigned int vf, unsigned int iqtype, unsigned int iqid,
8317 unsigned int fl0id, unsigned int fl1id)
8318 {
8319 struct fw_iq_cmd c;
8320
8321 memset(&c, 0, sizeof(c));
8322 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
8323 FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
8324 FW_IQ_CMD_VFN_V(vf));
8325 c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_IQSTOP_F | FW_LEN16(c));
8326 c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
8327 c.iqid = cpu_to_be16(iqid);
8328 c.fl0id = cpu_to_be16(fl0id);
8329 c.fl1id = cpu_to_be16(fl1id);
8330 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8331 }
8332
8333 /**
8334 * t4_iq_free - free an ingress queue and its FLs
8335 * @adap: the adapter
8336 * @mbox: mailbox to use for the FW command
8337 * @pf: the PF owning the queues
8338 * @vf: the VF owning the queues
8339 * @iqtype: the ingress queue type
8340 * @iqid: ingress queue id
8341 * @fl0id: FL0 queue id or 0xffff if no attached FL0
8342 * @fl1id: FL1 queue id or 0xffff if no attached FL1
8343 *
8344 * Frees an ingress queue and its associated FLs, if any.
8345 */
t4_iq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int iqtype,unsigned int iqid,unsigned int fl0id,unsigned int fl1id)8346 int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8347 unsigned int vf, unsigned int iqtype, unsigned int iqid,
8348 unsigned int fl0id, unsigned int fl1id)
8349 {
8350 struct fw_iq_cmd c;
8351
8352 memset(&c, 0, sizeof(c));
8353 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
8354 FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
8355 FW_IQ_CMD_VFN_V(vf));
8356 c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE_F | FW_LEN16(c));
8357 c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
8358 c.iqid = cpu_to_be16(iqid);
8359 c.fl0id = cpu_to_be16(fl0id);
8360 c.fl1id = cpu_to_be16(fl1id);
8361 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8362 }
8363
8364 /**
8365 * t4_eth_eq_free - free an Ethernet egress queue
8366 * @adap: the adapter
8367 * @mbox: mailbox to use for the FW command
8368 * @pf: the PF owning the queue
8369 * @vf: the VF owning the queue
8370 * @eqid: egress queue id
8371 *
8372 * Frees an Ethernet egress queue.
8373 */
t4_eth_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8374 int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8375 unsigned int vf, unsigned int eqid)
8376 {
8377 struct fw_eq_eth_cmd c;
8378
8379 memset(&c, 0, sizeof(c));
8380 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD) |
8381 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8382 FW_EQ_ETH_CMD_PFN_V(pf) |
8383 FW_EQ_ETH_CMD_VFN_V(vf));
8384 c.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE_F | FW_LEN16(c));
8385 c.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid));
8386 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8387 }
8388
8389 /**
8390 * t4_ctrl_eq_free - free a control egress queue
8391 * @adap: the adapter
8392 * @mbox: mailbox to use for the FW command
8393 * @pf: the PF owning the queue
8394 * @vf: the VF owning the queue
8395 * @eqid: egress queue id
8396 *
8397 * Frees a control egress queue.
8398 */
t4_ctrl_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8399 int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8400 unsigned int vf, unsigned int eqid)
8401 {
8402 struct fw_eq_ctrl_cmd c;
8403
8404 memset(&c, 0, sizeof(c));
8405 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_CTRL_CMD) |
8406 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8407 FW_EQ_CTRL_CMD_PFN_V(pf) |
8408 FW_EQ_CTRL_CMD_VFN_V(vf));
8409 c.alloc_to_len16 = cpu_to_be32(FW_EQ_CTRL_CMD_FREE_F | FW_LEN16(c));
8410 c.cmpliqid_eqid = cpu_to_be32(FW_EQ_CTRL_CMD_EQID_V(eqid));
8411 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8412 }
8413
8414 /**
8415 * t4_ofld_eq_free - free an offload egress queue
8416 * @adap: the adapter
8417 * @mbox: mailbox to use for the FW command
8418 * @pf: the PF owning the queue
8419 * @vf: the VF owning the queue
8420 * @eqid: egress queue id
8421 *
8422 * Frees a control egress queue.
8423 */
t4_ofld_eq_free(struct adapter * adap,unsigned int mbox,unsigned int pf,unsigned int vf,unsigned int eqid)8424 int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
8425 unsigned int vf, unsigned int eqid)
8426 {
8427 struct fw_eq_ofld_cmd c;
8428
8429 memset(&c, 0, sizeof(c));
8430 c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_OFLD_CMD) |
8431 FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
8432 FW_EQ_OFLD_CMD_PFN_V(pf) |
8433 FW_EQ_OFLD_CMD_VFN_V(vf));
8434 c.alloc_to_len16 = cpu_to_be32(FW_EQ_OFLD_CMD_FREE_F | FW_LEN16(c));
8435 c.eqid_pkd = cpu_to_be32(FW_EQ_OFLD_CMD_EQID_V(eqid));
8436 return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
8437 }
8438
8439 /**
8440 * t4_link_down_rc_str - return a string for a Link Down Reason Code
8441 * @link_down_rc: Link Down Reason Code
8442 *
8443 * Returns a string representation of the Link Down Reason Code.
8444 */
t4_link_down_rc_str(unsigned char link_down_rc)8445 static const char *t4_link_down_rc_str(unsigned char link_down_rc)
8446 {
8447 static const char * const reason[] = {
8448 "Link Down",
8449 "Remote Fault",
8450 "Auto-negotiation Failure",
8451 "Reserved",
8452 "Insufficient Airflow",
8453 "Unable To Determine Reason",
8454 "No RX Signal Detected",
8455 "Reserved",
8456 };
8457
8458 if (link_down_rc >= ARRAY_SIZE(reason))
8459 return "Bad Reason Code";
8460
8461 return reason[link_down_rc];
8462 }
8463
8464 /* Return the highest speed set in the port capabilities, in Mb/s. */
fwcap_to_speed(fw_port_cap32_t caps)8465 static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
8466 {
8467 #define TEST_SPEED_RETURN(__caps_speed, __speed) \
8468 do { \
8469 if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
8470 return __speed; \
8471 } while (0)
8472
8473 TEST_SPEED_RETURN(400G, 400000);
8474 TEST_SPEED_RETURN(200G, 200000);
8475 TEST_SPEED_RETURN(100G, 100000);
8476 TEST_SPEED_RETURN(50G, 50000);
8477 TEST_SPEED_RETURN(40G, 40000);
8478 TEST_SPEED_RETURN(25G, 25000);
8479 TEST_SPEED_RETURN(10G, 10000);
8480 TEST_SPEED_RETURN(1G, 1000);
8481 TEST_SPEED_RETURN(100M, 100);
8482
8483 #undef TEST_SPEED_RETURN
8484
8485 return 0;
8486 }
8487
8488 /**
8489 * fwcap_to_fwspeed - return highest speed in Port Capabilities
8490 * @acaps: advertised Port Capabilities
8491 *
8492 * Get the highest speed for the port from the advertised Port
8493 * Capabilities. It will be either the highest speed from the list of
8494 * speeds or whatever user has set using ethtool.
8495 */
fwcap_to_fwspeed(fw_port_cap32_t acaps)8496 static fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps)
8497 {
8498 #define TEST_SPEED_RETURN(__caps_speed) \
8499 do { \
8500 if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \
8501 return FW_PORT_CAP32_SPEED_##__caps_speed; \
8502 } while (0)
8503
8504 TEST_SPEED_RETURN(400G);
8505 TEST_SPEED_RETURN(200G);
8506 TEST_SPEED_RETURN(100G);
8507 TEST_SPEED_RETURN(50G);
8508 TEST_SPEED_RETURN(40G);
8509 TEST_SPEED_RETURN(25G);
8510 TEST_SPEED_RETURN(10G);
8511 TEST_SPEED_RETURN(1G);
8512 TEST_SPEED_RETURN(100M);
8513
8514 #undef TEST_SPEED_RETURN
8515
8516 return 0;
8517 }
8518
8519 /**
8520 * lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities
8521 * @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value
8522 *
8523 * Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new
8524 * 32-bit Port Capabilities value.
8525 */
lstatus_to_fwcap(u32 lstatus)8526 static fw_port_cap32_t lstatus_to_fwcap(u32 lstatus)
8527 {
8528 fw_port_cap32_t linkattr = 0;
8529
8530 /* Unfortunately the format of the Link Status in the old
8531 * 16-bit Port Information message isn't the same as the
8532 * 16-bit Port Capabilities bitfield used everywhere else ...
8533 */
8534 if (lstatus & FW_PORT_CMD_RXPAUSE_F)
8535 linkattr |= FW_PORT_CAP32_FC_RX;
8536 if (lstatus & FW_PORT_CMD_TXPAUSE_F)
8537 linkattr |= FW_PORT_CAP32_FC_TX;
8538 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
8539 linkattr |= FW_PORT_CAP32_SPEED_100M;
8540 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
8541 linkattr |= FW_PORT_CAP32_SPEED_1G;
8542 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
8543 linkattr |= FW_PORT_CAP32_SPEED_10G;
8544 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
8545 linkattr |= FW_PORT_CAP32_SPEED_25G;
8546 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
8547 linkattr |= FW_PORT_CAP32_SPEED_40G;
8548 if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
8549 linkattr |= FW_PORT_CAP32_SPEED_100G;
8550
8551 return linkattr;
8552 }
8553
8554 /**
8555 * t4_handle_get_port_info - process a FW reply message
8556 * @pi: the port info
8557 * @rpl: start of the FW message
8558 *
8559 * Processes a GET_PORT_INFO FW reply message.
8560 */
t4_handle_get_port_info(struct port_info * pi,const __be64 * rpl)8561 void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
8562 {
8563 const struct fw_port_cmd *cmd = (const void *)rpl;
8564 fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
8565 struct link_config *lc = &pi->link_cfg;
8566 struct adapter *adapter = pi->adapter;
8567 unsigned int speed, fc, fec, adv_fc;
8568 enum fw_port_module_type mod_type;
8569 int action, link_ok, linkdnrc;
8570 enum fw_port_type port_type;
8571
8572 /* Extract the various fields from the Port Information message.
8573 */
8574 action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
8575 switch (action) {
8576 case FW_PORT_ACTION_GET_PORT_INFO: {
8577 u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
8578
8579 link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0;
8580 linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus);
8581 port_type = FW_PORT_CMD_PTYPE_G(lstatus);
8582 mod_type = FW_PORT_CMD_MODTYPE_G(lstatus);
8583 pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
8584 acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
8585 lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap));
8586 linkattr = lstatus_to_fwcap(lstatus);
8587 break;
8588 }
8589
8590 case FW_PORT_ACTION_GET_PORT_INFO32: {
8591 u32 lstatus32;
8592
8593 lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
8594 link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0;
8595 linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32);
8596 port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
8597 mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32);
8598 pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
8599 acaps = be32_to_cpu(cmd->u.info32.acaps32);
8600 lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32);
8601 linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
8602 break;
8603 }
8604
8605 default:
8606 dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n",
8607 be32_to_cpu(cmd->action_to_len16));
8608 return;
8609 }
8610
8611 fec = fwcap_to_cc_fec(acaps);
8612 adv_fc = fwcap_to_cc_pause(acaps);
8613 fc = fwcap_to_cc_pause(linkattr);
8614 speed = fwcap_to_speed(linkattr);
8615
8616 /* Reset state for communicating new Transceiver Module status and
8617 * whether the OS-dependent layer wants us to redo the current
8618 * "sticky" L1 Configure Link Parameters.
8619 */
8620 lc->new_module = false;
8621 lc->redo_l1cfg = false;
8622
8623 if (mod_type != pi->mod_type) {
8624 /* With the newer SFP28 and QSFP28 Transceiver Module Types,
8625 * various fundamental Port Capabilities which used to be
8626 * immutable can now change radically. We can now have
8627 * Speeds, Auto-Negotiation, Forward Error Correction, etc.
8628 * all change based on what Transceiver Module is inserted.
8629 * So we need to record the Physical "Port" Capabilities on
8630 * every Transceiver Module change.
8631 */
8632 lc->pcaps = pcaps;
8633
8634 /* When a new Transceiver Module is inserted, the Firmware
8635 * will examine its i2c EPROM to determine its type and
8636 * general operating parameters including things like Forward
8637 * Error Control, etc. Various IEEE 802.3 standards dictate
8638 * how to interpret these i2c values to determine default
8639 * "sutomatic" settings. We record these for future use when
8640 * the user explicitly requests these standards-based values.
8641 */
8642 lc->def_acaps = acaps;
8643
8644 /* Some versions of the early T6 Firmware "cheated" when
8645 * handling different Transceiver Modules by changing the
8646 * underlaying Port Type reported to the Host Drivers. As
8647 * such we need to capture whatever Port Type the Firmware
8648 * sends us and record it in case it's different from what we
8649 * were told earlier. Unfortunately, since Firmware is
8650 * forever, we'll need to keep this code here forever, but in
8651 * later T6 Firmware it should just be an assignment of the
8652 * same value already recorded.
8653 */
8654 pi->port_type = port_type;
8655
8656 /* Record new Module Type information.
8657 */
8658 pi->mod_type = mod_type;
8659
8660 /* Let the OS-dependent layer know if we have a new
8661 * Transceiver Module inserted.
8662 */
8663 lc->new_module = t4_is_inserted_mod_type(mod_type);
8664
8665 t4_os_portmod_changed(adapter, pi->port_id);
8666 }
8667
8668 if (link_ok != lc->link_ok || speed != lc->speed ||
8669 fc != lc->fc || adv_fc != lc->advertised_fc ||
8670 fec != lc->fec) {
8671 /* something changed */
8672 if (!link_ok && lc->link_ok) {
8673 lc->link_down_rc = linkdnrc;
8674 dev_warn_ratelimited(adapter->pdev_dev,
8675 "Port %d link down, reason: %s\n",
8676 pi->tx_chan,
8677 t4_link_down_rc_str(linkdnrc));
8678 }
8679 lc->link_ok = link_ok;
8680 lc->speed = speed;
8681 lc->advertised_fc = adv_fc;
8682 lc->fc = fc;
8683 lc->fec = fec;
8684
8685 lc->lpacaps = lpacaps;
8686 lc->acaps = acaps & ADVERT_MASK;
8687
8688 /* If we're not physically capable of Auto-Negotiation, note
8689 * this as Auto-Negotiation disabled. Otherwise, we track
8690 * what Auto-Negotiation settings we have. Note parallel
8691 * structure in t4_link_l1cfg_core() and init_link_config().
8692 */
8693 if (!(lc->acaps & FW_PORT_CAP32_ANEG)) {
8694 lc->autoneg = AUTONEG_DISABLE;
8695 } else if (lc->acaps & FW_PORT_CAP32_ANEG) {
8696 lc->autoneg = AUTONEG_ENABLE;
8697 } else {
8698 /* When Autoneg is disabled, user needs to set
8699 * single speed.
8700 * Similar to cxgb4_ethtool.c: set_link_ksettings
8701 */
8702 lc->acaps = 0;
8703 lc->speed_caps = fwcap_to_fwspeed(acaps);
8704 lc->autoneg = AUTONEG_DISABLE;
8705 }
8706
8707 t4_os_link_changed(adapter, pi->port_id, link_ok);
8708 }
8709
8710 /* If we have a new Transceiver Module and the OS-dependent code has
8711 * told us that it wants us to redo whatever "sticky" L1 Configuration
8712 * Link Parameters are set, do that now.
8713 */
8714 if (lc->new_module && lc->redo_l1cfg) {
8715 struct link_config old_lc;
8716 int ret;
8717
8718 /* Save the current L1 Configuration and restore it if an
8719 * error occurs. We probably should fix the l1_cfg*()
8720 * routines not to change the link_config when an error
8721 * occurs ...
8722 */
8723 old_lc = *lc;
8724 ret = t4_link_l1cfg_ns(adapter, adapter->mbox, pi->lport, lc);
8725 if (ret) {
8726 *lc = old_lc;
8727 dev_warn(adapter->pdev_dev,
8728 "Attempt to update new Transceiver Module settings failed\n");
8729 }
8730 }
8731 lc->new_module = false;
8732 lc->redo_l1cfg = false;
8733 }
8734
8735 /**
8736 * t4_update_port_info - retrieve and update port information if changed
8737 * @pi: the port_info
8738 *
8739 * We issue a Get Port Information Command to the Firmware and, if
8740 * successful, we check to see if anything is different from what we
8741 * last recorded and update things accordingly.
8742 */
t4_update_port_info(struct port_info * pi)8743 int t4_update_port_info(struct port_info *pi)
8744 {
8745 unsigned int fw_caps = pi->adapter->params.fw_caps_support;
8746 struct fw_port_cmd port_cmd;
8747 int ret;
8748
8749 memset(&port_cmd, 0, sizeof(port_cmd));
8750 port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
8751 FW_CMD_REQUEST_F | FW_CMD_READ_F |
8752 FW_PORT_CMD_PORTID_V(pi->tx_chan));
8753 port_cmd.action_to_len16 = cpu_to_be32(
8754 FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
8755 ? FW_PORT_ACTION_GET_PORT_INFO
8756 : FW_PORT_ACTION_GET_PORT_INFO32) |
8757 FW_LEN16(port_cmd));
8758 ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
8759 &port_cmd, sizeof(port_cmd), &port_cmd);
8760 if (ret)
8761 return ret;
8762
8763 t4_handle_get_port_info(pi, (__be64 *)&port_cmd);
8764 return 0;
8765 }
8766
8767 /**
8768 * t4_get_link_params - retrieve basic link parameters for given port
8769 * @pi: the port
8770 * @link_okp: value return pointer for link up/down
8771 * @speedp: value return pointer for speed (Mb/s)
8772 * @mtup: value return pointer for mtu
8773 *
8774 * Retrieves basic link parameters for a port: link up/down, speed (Mb/s),
8775 * and MTU for a specified port. A negative error is returned on
8776 * failure; 0 on success.
8777 */
t4_get_link_params(struct port_info * pi,unsigned int * link_okp,unsigned int * speedp,unsigned int * mtup)8778 int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,
8779 unsigned int *speedp, unsigned int *mtup)
8780 {
8781 unsigned int fw_caps = pi->adapter->params.fw_caps_support;
8782 unsigned int action, link_ok, mtu;
8783 struct fw_port_cmd port_cmd;
8784 fw_port_cap32_t linkattr;
8785 int ret;
8786
8787 memset(&port_cmd, 0, sizeof(port_cmd));
8788 port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
8789 FW_CMD_REQUEST_F | FW_CMD_READ_F |
8790 FW_PORT_CMD_PORTID_V(pi->tx_chan));
8791 action = (fw_caps == FW_CAPS16
8792 ? FW_PORT_ACTION_GET_PORT_INFO
8793 : FW_PORT_ACTION_GET_PORT_INFO32);
8794 port_cmd.action_to_len16 = cpu_to_be32(
8795 FW_PORT_CMD_ACTION_V(action) |
8796 FW_LEN16(port_cmd));
8797 ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
8798 &port_cmd, sizeof(port_cmd), &port_cmd);
8799 if (ret)
8800 return ret;
8801
8802 if (action == FW_PORT_ACTION_GET_PORT_INFO) {
8803 u32 lstatus = be32_to_cpu(port_cmd.u.info.lstatus_to_modtype);
8804
8805 link_ok = !!(lstatus & FW_PORT_CMD_LSTATUS_F);
8806 linkattr = lstatus_to_fwcap(lstatus);
8807 mtu = be16_to_cpu(port_cmd.u.info.mtu);
8808 } else {
8809 u32 lstatus32 =
8810 be32_to_cpu(port_cmd.u.info32.lstatus32_to_cbllen32);
8811
8812 link_ok = !!(lstatus32 & FW_PORT_CMD_LSTATUS32_F);
8813 linkattr = be32_to_cpu(port_cmd.u.info32.linkattr32);
8814 mtu = FW_PORT_CMD_MTU32_G(
8815 be32_to_cpu(port_cmd.u.info32.auxlinfo32_mtu32));
8816 }
8817
8818 if (link_okp)
8819 *link_okp = link_ok;
8820 if (speedp)
8821 *speedp = fwcap_to_speed(linkattr);
8822 if (mtup)
8823 *mtup = mtu;
8824
8825 return 0;
8826 }
8827
8828 /**
8829 * t4_handle_fw_rpl - process a FW reply message
8830 * @adap: the adapter
8831 * @rpl: start of the FW message
8832 *
8833 * Processes a FW message, such as link state change messages.
8834 */
t4_handle_fw_rpl(struct adapter * adap,const __be64 * rpl)8835 int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
8836 {
8837 u8 opcode = *(const u8 *)rpl;
8838
8839 /* This might be a port command ... this simplifies the following
8840 * conditionals ... We can get away with pre-dereferencing
8841 * action_to_len16 because it's in the first 16 bytes and all messages
8842 * will be at least that long.
8843 */
8844 const struct fw_port_cmd *p = (const void *)rpl;
8845 unsigned int action =
8846 FW_PORT_CMD_ACTION_G(be32_to_cpu(p->action_to_len16));
8847
8848 if (opcode == FW_PORT_CMD &&
8849 (action == FW_PORT_ACTION_GET_PORT_INFO ||
8850 action == FW_PORT_ACTION_GET_PORT_INFO32)) {
8851 int i;
8852 int chan = FW_PORT_CMD_PORTID_G(be32_to_cpu(p->op_to_portid));
8853 struct port_info *pi = NULL;
8854
8855 for_each_port(adap, i) {
8856 pi = adap2pinfo(adap, i);
8857 if (pi->tx_chan == chan)
8858 break;
8859 }
8860
8861 t4_handle_get_port_info(pi, rpl);
8862 } else {
8863 dev_warn(adap->pdev_dev, "Unknown firmware reply %d\n",
8864 opcode);
8865 return -EINVAL;
8866 }
8867 return 0;
8868 }
8869
get_pci_mode(struct adapter * adapter,struct pci_params * p)8870 static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
8871 {
8872 u16 val;
8873
8874 if (pci_is_pcie(adapter->pdev)) {
8875 pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA, &val);
8876 p->speed = val & PCI_EXP_LNKSTA_CLS;
8877 p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4;
8878 }
8879 }
8880
8881 /**
8882 * init_link_config - initialize a link's SW state
8883 * @lc: pointer to structure holding the link state
8884 * @pcaps: link Port Capabilities
8885 * @acaps: link current Advertised Port Capabilities
8886 *
8887 * Initializes the SW state maintained for each link, including the link's
8888 * capabilities and default speed/flow-control/autonegotiation settings.
8889 */
init_link_config(struct link_config * lc,fw_port_cap32_t pcaps,fw_port_cap32_t acaps)8890 static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
8891 fw_port_cap32_t acaps)
8892 {
8893 lc->pcaps = pcaps;
8894 lc->def_acaps = acaps;
8895 lc->lpacaps = 0;
8896 lc->speed_caps = 0;
8897 lc->speed = 0;
8898 lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
8899
8900 /* For Forward Error Control, we default to whatever the Firmware
8901 * tells us the Link is currently advertising.
8902 */
8903 lc->requested_fec = FEC_AUTO;
8904 lc->fec = fwcap_to_cc_fec(lc->def_acaps);
8905
8906 /* If the Port is capable of Auto-Negtotiation, initialize it as
8907 * "enabled" and copy over all of the Physical Port Capabilities
8908 * to the Advertised Port Capabilities. Otherwise mark it as
8909 * Auto-Negotiate disabled and select the highest supported speed
8910 * for the link. Note parallel structure in t4_link_l1cfg_core()
8911 * and t4_handle_get_port_info().
8912 */
8913 if (lc->pcaps & FW_PORT_CAP32_ANEG) {
8914 lc->acaps = lc->pcaps & ADVERT_MASK;
8915 lc->autoneg = AUTONEG_ENABLE;
8916 lc->requested_fc |= PAUSE_AUTONEG;
8917 } else {
8918 lc->acaps = 0;
8919 lc->autoneg = AUTONEG_DISABLE;
8920 lc->speed_caps = fwcap_to_fwspeed(acaps);
8921 }
8922 }
8923
8924 #define CIM_PF_NOACCESS 0xeeeeeeee
8925
t4_wait_dev_ready(void __iomem * regs)8926 int t4_wait_dev_ready(void __iomem *regs)
8927 {
8928 u32 whoami;
8929
8930 whoami = readl(regs + PL_WHOAMI_A);
8931 if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS)
8932 return 0;
8933
8934 msleep(500);
8935 whoami = readl(regs + PL_WHOAMI_A);
8936 return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO);
8937 }
8938
8939 struct flash_desc {
8940 u32 vendor_and_model_id;
8941 u32 size_mb;
8942 };
8943
t4_get_flash_params(struct adapter * adap)8944 static int t4_get_flash_params(struct adapter *adap)
8945 {
8946 /* Table for non-Numonix supported flash parts. Numonix parts are left
8947 * to the preexisting code. All flash parts have 64KB sectors.
8948 */
8949 static struct flash_desc supported_flash[] = {
8950 { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */
8951 };
8952
8953 unsigned int part, manufacturer;
8954 unsigned int density, size = 0;
8955 u32 flashid = 0;
8956 int ret;
8957
8958 /* Issue a Read ID Command to the Flash part. We decode supported
8959 * Flash parts and their sizes from this. There's a newer Query
8960 * Command which can retrieve detailed geometry information but many
8961 * Flash parts don't support it.
8962 */
8963
8964 ret = sf1_write(adap, 1, 1, 0, SF_RD_ID);
8965 if (!ret)
8966 ret = sf1_read(adap, 3, 0, 1, &flashid);
8967 t4_write_reg(adap, SF_OP_A, 0); /* unlock SF */
8968 if (ret)
8969 return ret;
8970
8971 /* Check to see if it's one of our non-standard supported Flash parts.
8972 */
8973 for (part = 0; part < ARRAY_SIZE(supported_flash); part++)
8974 if (supported_flash[part].vendor_and_model_id == flashid) {
8975 adap->params.sf_size = supported_flash[part].size_mb;
8976 adap->params.sf_nsec =
8977 adap->params.sf_size / SF_SEC_SIZE;
8978 goto found;
8979 }
8980
8981 /* Decode Flash part size. The code below looks repetitive with
8982 * common encodings, but that's not guaranteed in the JEDEC
8983 * specification for the Read JEDEC ID command. The only thing that
8984 * we're guaranteed by the JEDEC specification is where the
8985 * Manufacturer ID is in the returned result. After that each
8986 * Manufacturer ~could~ encode things completely differently.
8987 * Note, all Flash parts must have 64KB sectors.
8988 */
8989 manufacturer = flashid & 0xff;
8990 switch (manufacturer) {
8991 case 0x20: { /* Micron/Numonix */
8992 /* This Density -> Size decoding table is taken from Micron
8993 * Data Sheets.
8994 */
8995 density = (flashid >> 16) & 0xff;
8996 switch (density) {
8997 case 0x14: /* 1MB */
8998 size = 1 << 20;
8999 break;
9000 case 0x15: /* 2MB */
9001 size = 1 << 21;
9002 break;
9003 case 0x16: /* 4MB */
9004 size = 1 << 22;
9005 break;
9006 case 0x17: /* 8MB */
9007 size = 1 << 23;
9008 break;
9009 case 0x18: /* 16MB */
9010 size = 1 << 24;
9011 break;
9012 case 0x19: /* 32MB */
9013 size = 1 << 25;
9014 break;
9015 case 0x20: /* 64MB */
9016 size = 1 << 26;
9017 break;
9018 case 0x21: /* 128MB */
9019 size = 1 << 27;
9020 break;
9021 case 0x22: /* 256MB */
9022 size = 1 << 28;
9023 break;
9024 }
9025 break;
9026 }
9027 case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
9028 /* This Density -> Size decoding table is taken from ISSI
9029 * Data Sheets.
9030 */
9031 density = (flashid >> 16) & 0xff;
9032 switch (density) {
9033 case 0x16: /* 32 MB */
9034 size = 1 << 25;
9035 break;
9036 case 0x17: /* 64MB */
9037 size = 1 << 26;
9038 break;
9039 }
9040 break;
9041 }
9042 case 0xc2: { /* Macronix */
9043 /* This Density -> Size decoding table is taken from Macronix
9044 * Data Sheets.
9045 */
9046 density = (flashid >> 16) & 0xff;
9047 switch (density) {
9048 case 0x17: /* 8MB */
9049 size = 1 << 23;
9050 break;
9051 case 0x18: /* 16MB */
9052 size = 1 << 24;
9053 break;
9054 }
9055 break;
9056 }
9057 case 0xef: { /* Winbond */
9058 /* This Density -> Size decoding table is taken from Winbond
9059 * Data Sheets.
9060 */
9061 density = (flashid >> 16) & 0xff;
9062 switch (density) {
9063 case 0x17: /* 8MB */
9064 size = 1 << 23;
9065 break;
9066 case 0x18: /* 16MB */
9067 size = 1 << 24;
9068 break;
9069 }
9070 break;
9071 }
9072 }
9073
9074 /* If we didn't recognize the FLASH part, that's no real issue: the
9075 * Hardware/Software contract says that Hardware will _*ALWAYS*_
9076 * use a FLASH part which is at least 4MB in size and has 64KB
9077 * sectors. The unrecognized FLASH part is likely to be much larger
9078 * than 4MB, but that's all we really need.
9079 */
9080 if (size == 0) {
9081 dev_warn(adap->pdev_dev, "Unknown Flash Part, ID = %#x, assuming 4MB\n",
9082 flashid);
9083 size = 1 << 22;
9084 }
9085
9086 /* Store decoded Flash size and fall through into vetting code. */
9087 adap->params.sf_size = size;
9088 adap->params.sf_nsec = size / SF_SEC_SIZE;
9089
9090 found:
9091 if (adap->params.sf_size < FLASH_MIN_SIZE)
9092 dev_warn(adap->pdev_dev, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
9093 flashid, adap->params.sf_size, FLASH_MIN_SIZE);
9094 return 0;
9095 }
9096
9097 /**
9098 * t4_prep_adapter - prepare SW and HW for operation
9099 * @adapter: the adapter
9100 *
9101 * Initialize adapter SW state for the various HW modules, set initial
9102 * values for some adapter tunables, take PHYs out of reset, and
9103 * initialize the MDIO interface.
9104 */
t4_prep_adapter(struct adapter * adapter)9105 int t4_prep_adapter(struct adapter *adapter)
9106 {
9107 int ret, ver;
9108 uint16_t device_id;
9109 u32 pl_rev;
9110
9111 get_pci_mode(adapter, &adapter->params.pci);
9112 pl_rev = REV_G(t4_read_reg(adapter, PL_REV_A));
9113
9114 ret = t4_get_flash_params(adapter);
9115 if (ret < 0) {
9116 dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret);
9117 return ret;
9118 }
9119
9120 /* Retrieve adapter's device ID
9121 */
9122 pci_read_config_word(adapter->pdev, PCI_DEVICE_ID, &device_id);
9123 ver = device_id >> 12;
9124 adapter->params.chip = 0;
9125 switch (ver) {
9126 case CHELSIO_T4:
9127 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev);
9128 adapter->params.arch.sge_fl_db = DBPRIO_F;
9129 adapter->params.arch.mps_tcam_size =
9130 NUM_MPS_CLS_SRAM_L_INSTANCES;
9131 adapter->params.arch.mps_rplc_size = 128;
9132 adapter->params.arch.nchan = NCHAN;
9133 adapter->params.arch.pm_stats_cnt = PM_NSTATS;
9134 adapter->params.arch.vfcount = 128;
9135 /* Congestion map is for 4 channels so that
9136 * MPS can have 4 priority per port.
9137 */
9138 adapter->params.arch.cng_ch_bits_log = 2;
9139 break;
9140 case CHELSIO_T5:
9141 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
9142 adapter->params.arch.sge_fl_db = DBPRIO_F | DBTYPE_F;
9143 adapter->params.arch.mps_tcam_size =
9144 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
9145 adapter->params.arch.mps_rplc_size = 128;
9146 adapter->params.arch.nchan = NCHAN;
9147 adapter->params.arch.pm_stats_cnt = PM_NSTATS;
9148 adapter->params.arch.vfcount = 128;
9149 adapter->params.arch.cng_ch_bits_log = 2;
9150 break;
9151 case CHELSIO_T6:
9152 adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
9153 adapter->params.arch.sge_fl_db = 0;
9154 adapter->params.arch.mps_tcam_size =
9155 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
9156 adapter->params.arch.mps_rplc_size = 256;
9157 adapter->params.arch.nchan = 2;
9158 adapter->params.arch.pm_stats_cnt = T6_PM_NSTATS;
9159 adapter->params.arch.vfcount = 256;
9160 /* Congestion map will be for 2 channels so that
9161 * MPS can have 8 priority per port.
9162 */
9163 adapter->params.arch.cng_ch_bits_log = 3;
9164 break;
9165 default:
9166 dev_err(adapter->pdev_dev, "Device %d is not supported\n",
9167 device_id);
9168 return -EINVAL;
9169 }
9170
9171 adapter->params.cim_la_size = CIMLA_SIZE;
9172 init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
9173
9174 /*
9175 * Default port for debugging in case we can't reach FW.
9176 */
9177 adapter->params.nports = 1;
9178 adapter->params.portvec = 1;
9179 adapter->params.vpd.cclk = 50000;
9180
9181 /* Set PCIe completion timeout to 4 seconds. */
9182 pcie_capability_clear_and_set_word(adapter->pdev, PCI_EXP_DEVCTL2,
9183 PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd);
9184 return 0;
9185 }
9186
9187 /**
9188 * t4_shutdown_adapter - shut down adapter, host & wire
9189 * @adapter: the adapter
9190 *
9191 * Perform an emergency shutdown of the adapter and stop it from
9192 * continuing any further communication on the ports or DMA to the
9193 * host. This is typically used when the adapter and/or firmware
9194 * have crashed and we want to prevent any further accidental
9195 * communication with the rest of the world. This will also force
9196 * the port Link Status to go down -- if register writes work --
9197 * which should help our peers figure out that we're down.
9198 */
t4_shutdown_adapter(struct adapter * adapter)9199 int t4_shutdown_adapter(struct adapter *adapter)
9200 {
9201 int port;
9202
9203 t4_intr_disable(adapter);
9204 t4_write_reg(adapter, DBG_GPIO_EN_A, 0);
9205 for_each_port(adapter, port) {
9206 u32 a_port_cfg = is_t4(adapter->params.chip) ?
9207 PORT_REG(port, XGMAC_PORT_CFG_A) :
9208 T5_PORT_REG(port, MAC_PORT_CFG_A);
9209
9210 t4_write_reg(adapter, a_port_cfg,
9211 t4_read_reg(adapter, a_port_cfg)
9212 & ~SIGNAL_DET_V(1));
9213 }
9214 t4_set_reg_field(adapter, SGE_CONTROL_A, GLOBALENABLE_F, 0);
9215
9216 return 0;
9217 }
9218
9219 /**
9220 * t4_bar2_sge_qregs - return BAR2 SGE Queue register information
9221 * @adapter: the adapter
9222 * @qid: the Queue ID
9223 * @qtype: the Ingress or Egress type for @qid
9224 * @user: true if this request is for a user mode queue
9225 * @pbar2_qoffset: BAR2 Queue Offset
9226 * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
9227 *
9228 * Returns the BAR2 SGE Queue Registers information associated with the
9229 * indicated Absolute Queue ID. These are passed back in return value
9230 * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
9231 * and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
9232 *
9233 * This may return an error which indicates that BAR2 SGE Queue
9234 * registers aren't available. If an error is not returned, then the
9235 * following values are returned:
9236 *
9237 * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
9238 * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
9239 *
9240 * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
9241 * require the "Inferred Queue ID" ability may be used. E.g. the
9242 * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
9243 * then these "Inferred Queue ID" register may not be used.
9244 */
t4_bar2_sge_qregs(struct adapter * adapter,unsigned int qid,enum t4_bar2_qtype qtype,int user,u64 * pbar2_qoffset,unsigned int * pbar2_qid)9245 int t4_bar2_sge_qregs(struct adapter *adapter,
9246 unsigned int qid,
9247 enum t4_bar2_qtype qtype,
9248 int user,
9249 u64 *pbar2_qoffset,
9250 unsigned int *pbar2_qid)
9251 {
9252 unsigned int page_shift, page_size, qpp_shift, qpp_mask;
9253 u64 bar2_page_offset, bar2_qoffset;
9254 unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;
9255
9256 /* T4 doesn't support BAR2 SGE Queue registers for kernel mode queues */
9257 if (!user && is_t4(adapter->params.chip))
9258 return -EINVAL;
9259
9260 /* Get our SGE Page Size parameters.
9261 */
9262 page_shift = adapter->params.sge.hps + 10;
9263 page_size = 1 << page_shift;
9264
9265 /* Get the right Queues per Page parameters for our Queue.
9266 */
9267 qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS
9268 ? adapter->params.sge.eq_qpp
9269 : adapter->params.sge.iq_qpp);
9270 qpp_mask = (1 << qpp_shift) - 1;
9271
9272 /* Calculate the basics of the BAR2 SGE Queue register area:
9273 * o The BAR2 page the Queue registers will be in.
9274 * o The BAR2 Queue ID.
9275 * o The BAR2 Queue ID Offset into the BAR2 page.
9276 */
9277 bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift);
9278 bar2_qid = qid & qpp_mask;
9279 bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;
9280
9281 /* If the BAR2 Queue ID Offset is less than the Page Size, then the
9282 * hardware will infer the Absolute Queue ID simply from the writes to
9283 * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
9284 * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply
9285 * write to the first BAR2 SGE Queue Area within the BAR2 Page with
9286 * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
9287 * from the BAR2 Page and BAR2 Queue ID.
9288 *
9289 * One important censequence of this is that some BAR2 SGE registers
9290 * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
9291 * there. But other registers synthesize the SGE Queue ID purely
9292 * from the writes to the registers -- the Write Combined Doorbell
9293 * Buffer is a good example. These BAR2 SGE Registers are only
9294 * available for those BAR2 SGE Register areas where the SGE Absolute
9295 * Queue ID can be inferred from simple writes.
9296 */
9297 bar2_qoffset = bar2_page_offset;
9298 bar2_qinferred = (bar2_qid_offset < page_size);
9299 if (bar2_qinferred) {
9300 bar2_qoffset += bar2_qid_offset;
9301 bar2_qid = 0;
9302 }
9303
9304 *pbar2_qoffset = bar2_qoffset;
9305 *pbar2_qid = bar2_qid;
9306 return 0;
9307 }
9308
9309 /**
9310 * t4_init_devlog_params - initialize adapter->params.devlog
9311 * @adap: the adapter
9312 *
9313 * Initialize various fields of the adapter's Firmware Device Log
9314 * Parameters structure.
9315 */
t4_init_devlog_params(struct adapter * adap)9316 int t4_init_devlog_params(struct adapter *adap)
9317 {
9318 struct devlog_params *dparams = &adap->params.devlog;
9319 u32 pf_dparams;
9320 unsigned int devlog_meminfo;
9321 struct fw_devlog_cmd devlog_cmd;
9322 int ret;
9323
9324 /* If we're dealing with newer firmware, the Device Log Parameters
9325 * are stored in a designated register which allows us to access the
9326 * Device Log even if we can't talk to the firmware.
9327 */
9328 pf_dparams =
9329 t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG));
9330 if (pf_dparams) {
9331 unsigned int nentries, nentries128;
9332
9333 dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams);
9334 dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4;
9335
9336 nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams);
9337 nentries = (nentries128 + 1) * 128;
9338 dparams->size = nentries * sizeof(struct fw_devlog_e);
9339
9340 return 0;
9341 }
9342
9343 /* Otherwise, ask the firmware for its Device Log Parameters.
9344 */
9345 memset(&devlog_cmd, 0, sizeof(devlog_cmd));
9346 devlog_cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_DEVLOG_CMD) |
9347 FW_CMD_REQUEST_F | FW_CMD_READ_F);
9348 devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd));
9349 ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
9350 &devlog_cmd);
9351 if (ret)
9352 return ret;
9353
9354 devlog_meminfo =
9355 be32_to_cpu(devlog_cmd.memtype_devlog_memaddr16_devlog);
9356 dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
9357 dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
9358 dparams->size = be32_to_cpu(devlog_cmd.memsize_devlog);
9359
9360 return 0;
9361 }
9362
9363 /**
9364 * t4_init_sge_params - initialize adap->params.sge
9365 * @adapter: the adapter
9366 *
9367 * Initialize various fields of the adapter's SGE Parameters structure.
9368 */
t4_init_sge_params(struct adapter * adapter)9369 int t4_init_sge_params(struct adapter *adapter)
9370 {
9371 struct sge_params *sge_params = &adapter->params.sge;
9372 u32 hps, qpp;
9373 unsigned int s_hps, s_qpp;
9374
9375 /* Extract the SGE Page Size for our PF.
9376 */
9377 hps = t4_read_reg(adapter, SGE_HOST_PAGE_SIZE_A);
9378 s_hps = (HOSTPAGESIZEPF0_S +
9379 (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * adapter->pf);
9380 sge_params->hps = ((hps >> s_hps) & HOSTPAGESIZEPF0_M);
9381
9382 /* Extract the SGE Egress and Ingess Queues Per Page for our PF.
9383 */
9384 s_qpp = (QUEUESPERPAGEPF0_S +
9385 (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * adapter->pf);
9386 qpp = t4_read_reg(adapter, SGE_EGRESS_QUEUES_PER_PAGE_PF_A);
9387 sge_params->eq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);
9388 qpp = t4_read_reg(adapter, SGE_INGRESS_QUEUES_PER_PAGE_PF_A);
9389 sge_params->iq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);
9390
9391 return 0;
9392 }
9393
9394 /**
9395 * t4_init_tp_params - initialize adap->params.tp
9396 * @adap: the adapter
9397 * @sleep_ok: if true we may sleep while awaiting command completion
9398 *
9399 * Initialize various fields of the adapter's TP Parameters structure.
9400 */
t4_init_tp_params(struct adapter * adap,bool sleep_ok)9401 int t4_init_tp_params(struct adapter *adap, bool sleep_ok)
9402 {
9403 u32 param, val, v;
9404 int chan, ret;
9405
9406
9407 v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A);
9408 adap->params.tp.tre = TIMERRESOLUTION_G(v);
9409 adap->params.tp.dack_re = DELAYEDACKRESOLUTION_G(v);
9410
9411 /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
9412 for (chan = 0; chan < NCHAN; chan++)
9413 adap->params.tp.tx_modq[chan] = chan;
9414
9415 /* Cache the adapter's Compressed Filter Mode/Mask and global Ingress
9416 * Configuration.
9417 */
9418 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
9419 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FILTER) |
9420 FW_PARAMS_PARAM_Y_V(FW_PARAM_DEV_FILTER_MODE_MASK));
9421
9422 /* Read current value */
9423 ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
9424 ¶m, &val);
9425 if (ret == 0) {
9426 dev_info(adap->pdev_dev,
9427 "Current filter mode/mask 0x%x:0x%x\n",
9428 FW_PARAMS_PARAM_FILTER_MODE_G(val),
9429 FW_PARAMS_PARAM_FILTER_MASK_G(val));
9430 adap->params.tp.vlan_pri_map =
9431 FW_PARAMS_PARAM_FILTER_MODE_G(val);
9432 adap->params.tp.filter_mask =
9433 FW_PARAMS_PARAM_FILTER_MASK_G(val);
9434 } else {
9435 dev_info(adap->pdev_dev,
9436 "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");
9437
9438 /* Incase of older-fw (which doesn't expose the api
9439 * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
9440 * the fw api) combination, fall-back to older method of reading
9441 * the filter mode from indirect-register
9442 */
9443 t4_tp_pio_read(adap, &adap->params.tp.vlan_pri_map, 1,
9444 TP_VLAN_PRI_MAP_A, sleep_ok);
9445
9446 /* With the older-fw and newer-driver combination we might run
9447 * into an issue when user wants to use hash filter region but
9448 * the filter_mask is zero, in this case filter_mask validation
9449 * is tough. To avoid that we set the filter_mask same as filter
9450 * mode, which will behave exactly as the older way of ignoring
9451 * the filter mask validation.
9452 */
9453 adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
9454 }
9455
9456 t4_tp_pio_read(adap, &adap->params.tp.ingress_config, 1,
9457 TP_INGRESS_CONFIG_A, sleep_ok);
9458
9459 /* For T6, cache the adapter's compressed error vector
9460 * and passing outer header info for encapsulated packets.
9461 */
9462 if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
9463 v = t4_read_reg(adap, TP_OUT_CONFIG_A);
9464 adap->params.tp.rx_pkt_encap = (v & CRXPKTENC_F) ? 1 : 0;
9465 }
9466
9467 /* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
9468 * shift positions of several elements of the Compressed Filter Tuple
9469 * for this adapter which we need frequently ...
9470 */
9471 adap->params.tp.fcoe_shift = t4_filter_field_shift(adap, FCOE_F);
9472 adap->params.tp.port_shift = t4_filter_field_shift(adap, PORT_F);
9473 adap->params.tp.vnic_shift = t4_filter_field_shift(adap, VNIC_ID_F);
9474 adap->params.tp.vlan_shift = t4_filter_field_shift(adap, VLAN_F);
9475 adap->params.tp.tos_shift = t4_filter_field_shift(adap, TOS_F);
9476 adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
9477 PROTOCOL_F);
9478 adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
9479 ETHERTYPE_F);
9480 adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
9481 MACMATCH_F);
9482 adap->params.tp.matchtype_shift = t4_filter_field_shift(adap,
9483 MPSHITTYPE_F);
9484 adap->params.tp.frag_shift = t4_filter_field_shift(adap,
9485 FRAGMENTATION_F);
9486
9487 /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
9488 * represents the presence of an Outer VLAN instead of a VNIC ID.
9489 */
9490 if ((adap->params.tp.ingress_config & VNIC_F) == 0)
9491 adap->params.tp.vnic_shift = -1;
9492
9493 v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
9494 adap->params.tp.hash_filter_mask = v;
9495 v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
9496 adap->params.tp.hash_filter_mask |= ((u64)v << 32);
9497 return 0;
9498 }
9499
9500 /**
9501 * t4_filter_field_shift - calculate filter field shift
9502 * @adap: the adapter
9503 * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
9504 *
9505 * Return the shift position of a filter field within the Compressed
9506 * Filter Tuple. The filter field is specified via its selection bit
9507 * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN.
9508 */
t4_filter_field_shift(const struct adapter * adap,int filter_sel)9509 int t4_filter_field_shift(const struct adapter *adap, int filter_sel)
9510 {
9511 unsigned int filter_mode = adap->params.tp.vlan_pri_map;
9512 unsigned int sel;
9513 int field_shift;
9514
9515 if ((filter_mode & filter_sel) == 0)
9516 return -1;
9517
9518 for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
9519 switch (filter_mode & sel) {
9520 case FCOE_F:
9521 field_shift += FT_FCOE_W;
9522 break;
9523 case PORT_F:
9524 field_shift += FT_PORT_W;
9525 break;
9526 case VNIC_ID_F:
9527 field_shift += FT_VNIC_ID_W;
9528 break;
9529 case VLAN_F:
9530 field_shift += FT_VLAN_W;
9531 break;
9532 case TOS_F:
9533 field_shift += FT_TOS_W;
9534 break;
9535 case PROTOCOL_F:
9536 field_shift += FT_PROTOCOL_W;
9537 break;
9538 case ETHERTYPE_F:
9539 field_shift += FT_ETHERTYPE_W;
9540 break;
9541 case MACMATCH_F:
9542 field_shift += FT_MACMATCH_W;
9543 break;
9544 case MPSHITTYPE_F:
9545 field_shift += FT_MPSHITTYPE_W;
9546 break;
9547 case FRAGMENTATION_F:
9548 field_shift += FT_FRAGMENTATION_W;
9549 break;
9550 }
9551 }
9552 return field_shift;
9553 }
9554
t4_init_rss_mode(struct adapter * adap,int mbox)9555 int t4_init_rss_mode(struct adapter *adap, int mbox)
9556 {
9557 int i, ret;
9558 struct fw_rss_vi_config_cmd rvc;
9559
9560 memset(&rvc, 0, sizeof(rvc));
9561
9562 for_each_port(adap, i) {
9563 struct port_info *p = adap2pinfo(adap, i);
9564
9565 rvc.op_to_viid =
9566 cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
9567 FW_CMD_REQUEST_F | FW_CMD_READ_F |
9568 FW_RSS_VI_CONFIG_CMD_VIID_V(p->viid));
9569 rvc.retval_len16 = cpu_to_be32(FW_LEN16(rvc));
9570 ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
9571 if (ret)
9572 return ret;
9573 p->rss_mode = be32_to_cpu(rvc.u.basicvirtual.defaultq_to_udpen);
9574 }
9575 return 0;
9576 }
9577
9578 /**
9579 * t4_init_portinfo - allocate a virtual interface and initialize port_info
9580 * @pi: the port_info
9581 * @mbox: mailbox to use for the FW command
9582 * @port: physical port associated with the VI
9583 * @pf: the PF owning the VI
9584 * @vf: the VF owning the VI
9585 * @mac: the MAC address of the VI
9586 *
9587 * Allocates a virtual interface for the given physical port. If @mac is
9588 * not %NULL it contains the MAC address of the VI as assigned by FW.
9589 * @mac should be large enough to hold an Ethernet address.
9590 * Returns < 0 on error.
9591 */
t4_init_portinfo(struct port_info * pi,int mbox,int port,int pf,int vf,u8 mac[])9592 int t4_init_portinfo(struct port_info *pi, int mbox,
9593 int port, int pf, int vf, u8 mac[])
9594 {
9595 struct adapter *adapter = pi->adapter;
9596 unsigned int fw_caps = adapter->params.fw_caps_support;
9597 struct fw_port_cmd cmd;
9598 unsigned int rss_size;
9599 enum fw_port_type port_type;
9600 int mdio_addr;
9601 fw_port_cap32_t pcaps, acaps;
9602 u8 vivld = 0, vin = 0;
9603 int ret;
9604
9605 /* If we haven't yet determined whether we're talking to Firmware
9606 * which knows the new 32-bit Port Capabilities, it's time to find
9607 * out now. This will also tell new Firmware to send us Port Status
9608 * Updates using the new 32-bit Port Capabilities version of the
9609 * Port Information message.
9610 */
9611 if (fw_caps == FW_CAPS_UNKNOWN) {
9612 u32 param, val;
9613
9614 param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
9615 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
9616 val = 1;
9617 ret = t4_set_params(adapter, mbox, pf, vf, 1, ¶m, &val);
9618 fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
9619 adapter->params.fw_caps_support = fw_caps;
9620 }
9621
9622 memset(&cmd, 0, sizeof(cmd));
9623 cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
9624 FW_CMD_REQUEST_F | FW_CMD_READ_F |
9625 FW_PORT_CMD_PORTID_V(port));
9626 cmd.action_to_len16 = cpu_to_be32(
9627 FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
9628 ? FW_PORT_ACTION_GET_PORT_INFO
9629 : FW_PORT_ACTION_GET_PORT_INFO32) |
9630 FW_LEN16(cmd));
9631 ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
9632 if (ret)
9633 return ret;
9634
9635 /* Extract the various fields from the Port Information message.
9636 */
9637 if (fw_caps == FW_CAPS16) {
9638 u32 lstatus = be32_to_cpu(cmd.u.info.lstatus_to_modtype);
9639
9640 port_type = FW_PORT_CMD_PTYPE_G(lstatus);
9641 mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F)
9642 ? FW_PORT_CMD_MDIOADDR_G(lstatus)
9643 : -1);
9644 pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.pcap));
9645 acaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.acap));
9646 } else {
9647 u32 lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
9648
9649 port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
9650 mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F)
9651 ? FW_PORT_CMD_MDIOADDR32_G(lstatus32)
9652 : -1);
9653 pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
9654 acaps = be32_to_cpu(cmd.u.info32.acaps32);
9655 }
9656
9657 ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, mac, &rss_size,
9658 &vivld, &vin);
9659 if (ret < 0)
9660 return ret;
9661
9662 pi->viid = ret;
9663 pi->tx_chan = port;
9664 pi->lport = port;
9665 pi->rss_size = rss_size;
9666 pi->rx_cchan = t4_get_tp_e2c_map(pi->adapter, port);
9667
9668 /* If fw supports returning the VIN as part of FW_VI_CMD,
9669 * save the returned values.
9670 */
9671 if (adapter->params.viid_smt_extn_support) {
9672 pi->vivld = vivld;
9673 pi->vin = vin;
9674 } else {
9675 /* Retrieve the values from VIID */
9676 pi->vivld = FW_VIID_VIVLD_G(pi->viid);
9677 pi->vin = FW_VIID_VIN_G(pi->viid);
9678 }
9679
9680 pi->port_type = port_type;
9681 pi->mdio_addr = mdio_addr;
9682 pi->mod_type = FW_PORT_MOD_TYPE_NA;
9683
9684 init_link_config(&pi->link_cfg, pcaps, acaps);
9685 return 0;
9686 }
9687
t4_port_init(struct adapter * adap,int mbox,int pf,int vf)9688 int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
9689 {
9690 u8 addr[6];
9691 int ret, i, j = 0;
9692
9693 for_each_port(adap, i) {
9694 struct port_info *pi = adap2pinfo(adap, i);
9695
9696 while ((adap->params.portvec & (1 << j)) == 0)
9697 j++;
9698
9699 ret = t4_init_portinfo(pi, mbox, j, pf, vf, addr);
9700 if (ret)
9701 return ret;
9702
9703 eth_hw_addr_set(adap->port[i], addr);
9704 j++;
9705 }
9706 return 0;
9707 }
9708
t4_init_port_mirror(struct port_info * pi,u8 mbox,u8 port,u8 pf,u8 vf,u16 * mirror_viid)9709 int t4_init_port_mirror(struct port_info *pi, u8 mbox, u8 port, u8 pf, u8 vf,
9710 u16 *mirror_viid)
9711 {
9712 int ret;
9713
9714 ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, NULL, NULL,
9715 NULL, NULL);
9716 if (ret < 0)
9717 return ret;
9718
9719 if (mirror_viid)
9720 *mirror_viid = ret;
9721
9722 return 0;
9723 }
9724
9725 /**
9726 * t4_read_cimq_cfg - read CIM queue configuration
9727 * @adap: the adapter
9728 * @base: holds the queue base addresses in bytes
9729 * @size: holds the queue sizes in bytes
9730 * @thres: holds the queue full thresholds in bytes
9731 *
9732 * Returns the current configuration of the CIM queues, starting with
9733 * the IBQs, then the OBQs.
9734 */
t4_read_cimq_cfg(struct adapter * adap,u16 * base,u16 * size,u16 * thres)9735 void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres)
9736 {
9737 unsigned int i, v;
9738 int cim_num_obq = is_t4(adap->params.chip) ?
9739 CIM_NUM_OBQ : CIM_NUM_OBQ_T5;
9740
9741 for (i = 0; i < CIM_NUM_IBQ; i++) {
9742 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, IBQSELECT_F |
9743 QUENUMSELECT_V(i));
9744 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9745 /* value is in 256-byte units */
9746 *base++ = CIMQBASE_G(v) * 256;
9747 *size++ = CIMQSIZE_G(v) * 256;
9748 *thres++ = QUEFULLTHRSH_G(v) * 8; /* 8-byte unit */
9749 }
9750 for (i = 0; i < cim_num_obq; i++) {
9751 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
9752 QUENUMSELECT_V(i));
9753 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9754 /* value is in 256-byte units */
9755 *base++ = CIMQBASE_G(v) * 256;
9756 *size++ = CIMQSIZE_G(v) * 256;
9757 }
9758 }
9759
9760 /**
9761 * t4_read_cim_ibq - read the contents of a CIM inbound queue
9762 * @adap: the adapter
9763 * @qid: the queue index
9764 * @data: where to store the queue contents
9765 * @n: capacity of @data in 32-bit words
9766 *
9767 * Reads the contents of the selected CIM queue starting at address 0 up
9768 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on
9769 * error and the number of 32-bit words actually read on success.
9770 */
t4_read_cim_ibq(struct adapter * adap,unsigned int qid,u32 * data,size_t n)9771 int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
9772 {
9773 int i, err, attempts;
9774 unsigned int addr;
9775 const unsigned int nwords = CIM_IBQ_SIZE * 4;
9776
9777 if (qid > 5 || (n & 3))
9778 return -EINVAL;
9779
9780 addr = qid * nwords;
9781 if (n > nwords)
9782 n = nwords;
9783
9784 /* It might take 3-10ms before the IBQ debug read access is allowed.
9785 * Wait for 1 Sec with a delay of 1 usec.
9786 */
9787 attempts = 1000000;
9788
9789 for (i = 0; i < n; i++, addr++) {
9790 t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, IBQDBGADDR_V(addr) |
9791 IBQDBGEN_F);
9792 err = t4_wait_op_done(adap, CIM_IBQ_DBG_CFG_A, IBQDBGBUSY_F, 0,
9793 attempts, 1);
9794 if (err)
9795 return err;
9796 *data++ = t4_read_reg(adap, CIM_IBQ_DBG_DATA_A);
9797 }
9798 t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, 0);
9799 return i;
9800 }
9801
9802 /**
9803 * t4_read_cim_obq - read the contents of a CIM outbound queue
9804 * @adap: the adapter
9805 * @qid: the queue index
9806 * @data: where to store the queue contents
9807 * @n: capacity of @data in 32-bit words
9808 *
9809 * Reads the contents of the selected CIM queue starting at address 0 up
9810 * to the capacity of @data. @n must be a multiple of 4. Returns < 0 on
9811 * error and the number of 32-bit words actually read on success.
9812 */
t4_read_cim_obq(struct adapter * adap,unsigned int qid,u32 * data,size_t n)9813 int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
9814 {
9815 int i, err;
9816 unsigned int addr, v, nwords;
9817 int cim_num_obq = is_t4(adap->params.chip) ?
9818 CIM_NUM_OBQ : CIM_NUM_OBQ_T5;
9819
9820 if ((qid > (cim_num_obq - 1)) || (n & 3))
9821 return -EINVAL;
9822
9823 t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
9824 QUENUMSELECT_V(qid));
9825 v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
9826
9827 addr = CIMQBASE_G(v) * 64; /* muliple of 256 -> muliple of 4 */
9828 nwords = CIMQSIZE_G(v) * 64; /* same */
9829 if (n > nwords)
9830 n = nwords;
9831
9832 for (i = 0; i < n; i++, addr++) {
9833 t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, OBQDBGADDR_V(addr) |
9834 OBQDBGEN_F);
9835 err = t4_wait_op_done(adap, CIM_OBQ_DBG_CFG_A, OBQDBGBUSY_F, 0,
9836 2, 1);
9837 if (err)
9838 return err;
9839 *data++ = t4_read_reg(adap, CIM_OBQ_DBG_DATA_A);
9840 }
9841 t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, 0);
9842 return i;
9843 }
9844
9845 /**
9846 * t4_cim_read - read a block from CIM internal address space
9847 * @adap: the adapter
9848 * @addr: the start address within the CIM address space
9849 * @n: number of words to read
9850 * @valp: where to store the result
9851 *
9852 * Reads a block of 4-byte words from the CIM intenal address space.
9853 */
t4_cim_read(struct adapter * adap,unsigned int addr,unsigned int n,unsigned int * valp)9854 int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n,
9855 unsigned int *valp)
9856 {
9857 int ret = 0;
9858
9859 if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
9860 return -EBUSY;
9861
9862 for ( ; !ret && n--; addr += 4) {
9863 t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr);
9864 ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
9865 0, 5, 2);
9866 if (!ret)
9867 *valp++ = t4_read_reg(adap, CIM_HOST_ACC_DATA_A);
9868 }
9869 return ret;
9870 }
9871
9872 /**
9873 * t4_cim_write - write a block into CIM internal address space
9874 * @adap: the adapter
9875 * @addr: the start address within the CIM address space
9876 * @n: number of words to write
9877 * @valp: set of values to write
9878 *
9879 * Writes a block of 4-byte words into the CIM intenal address space.
9880 */
t4_cim_write(struct adapter * adap,unsigned int addr,unsigned int n,const unsigned int * valp)9881 int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n,
9882 const unsigned int *valp)
9883 {
9884 int ret = 0;
9885
9886 if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
9887 return -EBUSY;
9888
9889 for ( ; !ret && n--; addr += 4) {
9890 t4_write_reg(adap, CIM_HOST_ACC_DATA_A, *valp++);
9891 t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr | HOSTWRITE_F);
9892 ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
9893 0, 5, 2);
9894 }
9895 return ret;
9896 }
9897
t4_cim_write1(struct adapter * adap,unsigned int addr,unsigned int val)9898 static int t4_cim_write1(struct adapter *adap, unsigned int addr,
9899 unsigned int val)
9900 {
9901 return t4_cim_write(adap, addr, 1, &val);
9902 }
9903
9904 /**
9905 * t4_cim_read_la - read CIM LA capture buffer
9906 * @adap: the adapter
9907 * @la_buf: where to store the LA data
9908 * @wrptr: the HW write pointer within the capture buffer
9909 *
9910 * Reads the contents of the CIM LA buffer with the most recent entry at
9911 * the end of the returned data and with the entry at @wrptr first.
9912 * We try to leave the LA in the running state we find it in.
9913 */
t4_cim_read_la(struct adapter * adap,u32 * la_buf,unsigned int * wrptr)9914 int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr)
9915 {
9916 int i, ret;
9917 unsigned int cfg, val, idx;
9918
9919 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &cfg);
9920 if (ret)
9921 return ret;
9922
9923 if (cfg & UPDBGLAEN_F) { /* LA is running, freeze it */
9924 ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, 0);
9925 if (ret)
9926 return ret;
9927 }
9928
9929 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
9930 if (ret)
9931 goto restart;
9932
9933 idx = UPDBGLAWRPTR_G(val);
9934 if (wrptr)
9935 *wrptr = idx;
9936
9937 for (i = 0; i < adap->params.cim_la_size; i++) {
9938 ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
9939 UPDBGLARDPTR_V(idx) | UPDBGLARDEN_F);
9940 if (ret)
9941 break;
9942 ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
9943 if (ret)
9944 break;
9945 if (val & UPDBGLARDEN_F) {
9946 ret = -ETIMEDOUT;
9947 break;
9948 }
9949 ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]);
9950 if (ret)
9951 break;
9952
9953 /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to
9954 * identify the 32-bit portion of the full 312-bit data
9955 */
9956 if (is_t6(adap->params.chip) && (idx & 0xf) >= 9)
9957 idx = (idx & 0xff0) + 0x10;
9958 else
9959 idx++;
9960 /* address can't exceed 0xfff */
9961 idx &= UPDBGLARDPTR_M;
9962 }
9963 restart:
9964 if (cfg & UPDBGLAEN_F) {
9965 int r = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
9966 cfg & ~UPDBGLARDEN_F);
9967 if (!ret)
9968 ret = r;
9969 }
9970 return ret;
9971 }
9972
9973 /**
9974 * t4_tp_read_la - read TP LA capture buffer
9975 * @adap: the adapter
9976 * @la_buf: where to store the LA data
9977 * @wrptr: the HW write pointer within the capture buffer
9978 *
9979 * Reads the contents of the TP LA buffer with the most recent entry at
9980 * the end of the returned data and with the entry at @wrptr first.
9981 * We leave the LA in the running state we find it in.
9982 */
t4_tp_read_la(struct adapter * adap,u64 * la_buf,unsigned int * wrptr)9983 void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr)
9984 {
9985 bool last_incomplete;
9986 unsigned int i, cfg, val, idx;
9987
9988 cfg = t4_read_reg(adap, TP_DBG_LA_CONFIG_A) & 0xffff;
9989 if (cfg & DBGLAENABLE_F) /* freeze LA */
9990 t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
9991 adap->params.tp.la_mask | (cfg ^ DBGLAENABLE_F));
9992
9993 val = t4_read_reg(adap, TP_DBG_LA_CONFIG_A);
9994 idx = DBGLAWPTR_G(val);
9995 last_incomplete = DBGLAMODE_G(val) >= 2 && (val & DBGLAWHLF_F) == 0;
9996 if (last_incomplete)
9997 idx = (idx + 1) & DBGLARPTR_M;
9998 if (wrptr)
9999 *wrptr = idx;
10000
10001 val &= 0xffff;
10002 val &= ~DBGLARPTR_V(DBGLARPTR_M);
10003 val |= adap->params.tp.la_mask;
10004
10005 for (i = 0; i < TPLA_SIZE; i++) {
10006 t4_write_reg(adap, TP_DBG_LA_CONFIG_A, DBGLARPTR_V(idx) | val);
10007 la_buf[i] = t4_read_reg64(adap, TP_DBG_LA_DATAL_A);
10008 idx = (idx + 1) & DBGLARPTR_M;
10009 }
10010
10011 /* Wipe out last entry if it isn't valid */
10012 if (last_incomplete)
10013 la_buf[TPLA_SIZE - 1] = ~0ULL;
10014
10015 if (cfg & DBGLAENABLE_F) /* restore running state */
10016 t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
10017 cfg | adap->params.tp.la_mask);
10018 }
10019
10020 /* SGE Hung Ingress DMA Warning Threshold time and Warning Repeat Rate (in
10021 * seconds). If we find one of the SGE Ingress DMA State Machines in the same
10022 * state for more than the Warning Threshold then we'll issue a warning about
10023 * a potential hang. We'll repeat the warning as the SGE Ingress DMA Channel
10024 * appears to be hung every Warning Repeat second till the situation clears.
10025 * If the situation clears, we'll note that as well.
10026 */
10027 #define SGE_IDMA_WARN_THRESH 1
10028 #define SGE_IDMA_WARN_REPEAT 300
10029
10030 /**
10031 * t4_idma_monitor_init - initialize SGE Ingress DMA Monitor
10032 * @adapter: the adapter
10033 * @idma: the adapter IDMA Monitor state
10034 *
10035 * Initialize the state of an SGE Ingress DMA Monitor.
10036 */
t4_idma_monitor_init(struct adapter * adapter,struct sge_idma_monitor_state * idma)10037 void t4_idma_monitor_init(struct adapter *adapter,
10038 struct sge_idma_monitor_state *idma)
10039 {
10040 /* Initialize the state variables for detecting an SGE Ingress DMA
10041 * hang. The SGE has internal counters which count up on each clock
10042 * tick whenever the SGE finds its Ingress DMA State Engines in the
10043 * same state they were on the previous clock tick. The clock used is
10044 * the Core Clock so we have a limit on the maximum "time" they can
10045 * record; typically a very small number of seconds. For instance,
10046 * with a 600MHz Core Clock, we can only count up to a bit more than
10047 * 7s. So we'll synthesize a larger counter in order to not run the
10048 * risk of having the "timers" overflow and give us the flexibility to
10049 * maintain a Hung SGE State Machine of our own which operates across
10050 * a longer time frame.
10051 */
10052 idma->idma_1s_thresh = core_ticks_per_usec(adapter) * 1000000; /* 1s */
10053 idma->idma_stalled[0] = 0;
10054 idma->idma_stalled[1] = 0;
10055 }
10056
10057 /**
10058 * t4_idma_monitor - monitor SGE Ingress DMA state
10059 * @adapter: the adapter
10060 * @idma: the adapter IDMA Monitor state
10061 * @hz: number of ticks/second
10062 * @ticks: number of ticks since the last IDMA Monitor call
10063 */
t4_idma_monitor(struct adapter * adapter,struct sge_idma_monitor_state * idma,int hz,int ticks)10064 void t4_idma_monitor(struct adapter *adapter,
10065 struct sge_idma_monitor_state *idma,
10066 int hz, int ticks)
10067 {
10068 int i, idma_same_state_cnt[2];
10069
10070 /* Read the SGE Debug Ingress DMA Same State Count registers. These
10071 * are counters inside the SGE which count up on each clock when the
10072 * SGE finds its Ingress DMA State Engines in the same states they
10073 * were in the previous clock. The counters will peg out at
10074 * 0xffffffff without wrapping around so once they pass the 1s
10075 * threshold they'll stay above that till the IDMA state changes.
10076 */
10077 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 13);
10078 idma_same_state_cnt[0] = t4_read_reg(adapter, SGE_DEBUG_DATA_HIGH_A);
10079 idma_same_state_cnt[1] = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
10080
10081 for (i = 0; i < 2; i++) {
10082 u32 debug0, debug11;
10083
10084 /* If the Ingress DMA Same State Counter ("timer") is less
10085 * than 1s, then we can reset our synthesized Stall Timer and
10086 * continue. If we have previously emitted warnings about a
10087 * potential stalled Ingress Queue, issue a note indicating
10088 * that the Ingress Queue has resumed forward progress.
10089 */
10090 if (idma_same_state_cnt[i] < idma->idma_1s_thresh) {
10091 if (idma->idma_stalled[i] >= SGE_IDMA_WARN_THRESH * hz)
10092 dev_warn(adapter->pdev_dev, "SGE idma%d, queue %u, "
10093 "resumed after %d seconds\n",
10094 i, idma->idma_qid[i],
10095 idma->idma_stalled[i] / hz);
10096 idma->idma_stalled[i] = 0;
10097 continue;
10098 }
10099
10100 /* Synthesize an SGE Ingress DMA Same State Timer in the Hz
10101 * domain. The first time we get here it'll be because we
10102 * passed the 1s Threshold; each additional time it'll be
10103 * because the RX Timer Callback is being fired on its regular
10104 * schedule.
10105 *
10106 * If the stall is below our Potential Hung Ingress Queue
10107 * Warning Threshold, continue.
10108 */
10109 if (idma->idma_stalled[i] == 0) {
10110 idma->idma_stalled[i] = hz;
10111 idma->idma_warn[i] = 0;
10112 } else {
10113 idma->idma_stalled[i] += ticks;
10114 idma->idma_warn[i] -= ticks;
10115 }
10116
10117 if (idma->idma_stalled[i] < SGE_IDMA_WARN_THRESH * hz)
10118 continue;
10119
10120 /* We'll issue a warning every SGE_IDMA_WARN_REPEAT seconds.
10121 */
10122 if (idma->idma_warn[i] > 0)
10123 continue;
10124 idma->idma_warn[i] = SGE_IDMA_WARN_REPEAT * hz;
10125
10126 /* Read and save the SGE IDMA State and Queue ID information.
10127 * We do this every time in case it changes across time ...
10128 * can't be too careful ...
10129 */
10130 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 0);
10131 debug0 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
10132 idma->idma_state[i] = (debug0 >> (i * 9)) & 0x3f;
10133
10134 t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 11);
10135 debug11 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
10136 idma->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff;
10137
10138 dev_warn(adapter->pdev_dev, "SGE idma%u, queue %u, potentially stuck in "
10139 "state %u for %d seconds (debug0=%#x, debug11=%#x)\n",
10140 i, idma->idma_qid[i], idma->idma_state[i],
10141 idma->idma_stalled[i] / hz,
10142 debug0, debug11);
10143 t4_sge_decode_idma_state(adapter, idma->idma_state[i]);
10144 }
10145 }
10146
10147 /**
10148 * t4_load_cfg - download config file
10149 * @adap: the adapter
10150 * @cfg_data: the cfg text file to write
10151 * @size: text file size
10152 *
10153 * Write the supplied config text file to the card's serial flash.
10154 */
t4_load_cfg(struct adapter * adap,const u8 * cfg_data,unsigned int size)10155 int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
10156 {
10157 int ret, i, n, cfg_addr;
10158 unsigned int addr;
10159 unsigned int flash_cfg_start_sec;
10160 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
10161
10162 cfg_addr = t4_flash_cfg_addr(adap);
10163 if (cfg_addr < 0)
10164 return cfg_addr;
10165
10166 addr = cfg_addr;
10167 flash_cfg_start_sec = addr / SF_SEC_SIZE;
10168
10169 if (size > FLASH_CFG_MAX_SIZE) {
10170 dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
10171 FLASH_CFG_MAX_SIZE);
10172 return -EFBIG;
10173 }
10174
10175 i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE, /* # of sectors spanned */
10176 sf_sec_size);
10177 ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
10178 flash_cfg_start_sec + i - 1);
10179 /* If size == 0 then we're simply erasing the FLASH sectors associated
10180 * with the on-adapter Firmware Configuration File.
10181 */
10182 if (ret || size == 0)
10183 goto out;
10184
10185 /* this will write to the flash up to SF_PAGE_SIZE at a time */
10186 for (i = 0; i < size; i += SF_PAGE_SIZE) {
10187 if ((size - i) < SF_PAGE_SIZE)
10188 n = size - i;
10189 else
10190 n = SF_PAGE_SIZE;
10191 ret = t4_write_flash(adap, addr, n, cfg_data, true);
10192 if (ret)
10193 goto out;
10194
10195 addr += SF_PAGE_SIZE;
10196 cfg_data += SF_PAGE_SIZE;
10197 }
10198
10199 out:
10200 if (ret)
10201 dev_err(adap->pdev_dev, "config file %s failed %d\n",
10202 (size == 0 ? "clear" : "download"), ret);
10203 return ret;
10204 }
10205
10206 /**
10207 * t4_set_vf_mac_acl - Set MAC address for the specified VF
10208 * @adapter: The adapter
10209 * @vf: one of the VFs instantiated by the specified PF
10210 * @start: The start port id associated with specified VF
10211 * @naddr: the number of MAC addresses
10212 * @addr: the MAC address(es) to be set to the specified VF
10213 */
t4_set_vf_mac_acl(struct adapter * adapter,unsigned int vf,u8 start,unsigned int naddr,u8 * addr)10214 int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
10215 u8 start, unsigned int naddr, u8 *addr)
10216 {
10217 struct fw_acl_mac_cmd cmd;
10218
10219 memset(&cmd, 0, sizeof(cmd));
10220 cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
10221 FW_CMD_REQUEST_F |
10222 FW_CMD_WRITE_F |
10223 FW_ACL_MAC_CMD_PFN_V(adapter->pf) |
10224 FW_ACL_MAC_CMD_VFN_V(vf));
10225
10226 /* Note: Do not enable the ACL */
10227 cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
10228 cmd.nmac = naddr;
10229
10230 switch (start) {
10231 case 3:
10232 memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3));
10233 break;
10234 case 2:
10235 memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2));
10236 break;
10237 case 1:
10238 memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1));
10239 break;
10240 case 0:
10241 memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0));
10242 break;
10243 }
10244
10245 return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd);
10246 }
10247
10248 /**
10249 * t4_read_pace_tbl - read the pace table
10250 * @adap: the adapter
10251 * @pace_vals: holds the returned values
10252 *
10253 * Returns the values of TP's pace table in microseconds.
10254 */
t4_read_pace_tbl(struct adapter * adap,unsigned int pace_vals[NTX_SCHED])10255 void t4_read_pace_tbl(struct adapter *adap, unsigned int pace_vals[NTX_SCHED])
10256 {
10257 unsigned int i, v;
10258
10259 for (i = 0; i < NTX_SCHED; i++) {
10260 t4_write_reg(adap, TP_PACE_TABLE_A, 0xffff0000 + i);
10261 v = t4_read_reg(adap, TP_PACE_TABLE_A);
10262 pace_vals[i] = dack_ticks_to_usec(adap, v);
10263 }
10264 }
10265
10266 /**
10267 * t4_get_tx_sched - get the configuration of a Tx HW traffic scheduler
10268 * @adap: the adapter
10269 * @sched: the scheduler index
10270 * @kbps: the byte rate in Kbps
10271 * @ipg: the interpacket delay in tenths of nanoseconds
10272 * @sleep_ok: if true we may sleep while awaiting command completion
10273 *
10274 * Return the current configuration of a HW Tx scheduler.
10275 */
t4_get_tx_sched(struct adapter * adap,unsigned int sched,unsigned int * kbps,unsigned int * ipg,bool sleep_ok)10276 void t4_get_tx_sched(struct adapter *adap, unsigned int sched,
10277 unsigned int *kbps, unsigned int *ipg, bool sleep_ok)
10278 {
10279 unsigned int v, addr, bpt, cpt;
10280
10281 if (kbps) {
10282 addr = TP_TX_MOD_Q1_Q0_RATE_LIMIT_A - sched / 2;
10283 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
10284 if (sched & 1)
10285 v >>= 16;
10286 bpt = (v >> 8) & 0xff;
10287 cpt = v & 0xff;
10288 if (!cpt) {
10289 *kbps = 0; /* scheduler disabled */
10290 } else {
10291 v = (adap->params.vpd.cclk * 1000) / cpt; /* ticks/s */
10292 *kbps = (v * bpt) / 125;
10293 }
10294 }
10295 if (ipg) {
10296 addr = TP_TX_MOD_Q1_Q0_TIMER_SEPARATOR_A - sched / 2;
10297 t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
10298 if (sched & 1)
10299 v >>= 16;
10300 v &= 0xffff;
10301 *ipg = (10000 * v) / core_ticks_per_usec(adap);
10302 }
10303 }
10304
10305 /* t4_sge_ctxt_rd - read an SGE context through FW
10306 * @adap: the adapter
10307 * @mbox: mailbox to use for the FW command
10308 * @cid: the context id
10309 * @ctype: the context type
10310 * @data: where to store the context data
10311 *
10312 * Issues a FW command through the given mailbox to read an SGE context.
10313 */
t4_sge_ctxt_rd(struct adapter * adap,unsigned int mbox,unsigned int cid,enum ctxt_type ctype,u32 * data)10314 int t4_sge_ctxt_rd(struct adapter *adap, unsigned int mbox, unsigned int cid,
10315 enum ctxt_type ctype, u32 *data)
10316 {
10317 struct fw_ldst_cmd c;
10318 int ret;
10319
10320 if (ctype == CTXT_FLM)
10321 ret = FW_LDST_ADDRSPC_SGE_FLMC;
10322 else
10323 ret = FW_LDST_ADDRSPC_SGE_CONMC;
10324
10325 memset(&c, 0, sizeof(c));
10326 c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
10327 FW_CMD_REQUEST_F | FW_CMD_READ_F |
10328 FW_LDST_CMD_ADDRSPACE_V(ret));
10329 c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
10330 c.u.idctxt.physid = cpu_to_be32(cid);
10331
10332 ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
10333 if (ret == 0) {
10334 data[0] = be32_to_cpu(c.u.idctxt.ctxt_data0);
10335 data[1] = be32_to_cpu(c.u.idctxt.ctxt_data1);
10336 data[2] = be32_to_cpu(c.u.idctxt.ctxt_data2);
10337 data[3] = be32_to_cpu(c.u.idctxt.ctxt_data3);
10338 data[4] = be32_to_cpu(c.u.idctxt.ctxt_data4);
10339 data[5] = be32_to_cpu(c.u.idctxt.ctxt_data5);
10340 }
10341 return ret;
10342 }
10343
10344 /**
10345 * t4_sge_ctxt_rd_bd - read an SGE context bypassing FW
10346 * @adap: the adapter
10347 * @cid: the context id
10348 * @ctype: the context type
10349 * @data: where to store the context data
10350 *
10351 * Reads an SGE context directly, bypassing FW. This is only for
10352 * debugging when FW is unavailable.
10353 */
t4_sge_ctxt_rd_bd(struct adapter * adap,unsigned int cid,enum ctxt_type ctype,u32 * data)10354 int t4_sge_ctxt_rd_bd(struct adapter *adap, unsigned int cid,
10355 enum ctxt_type ctype, u32 *data)
10356 {
10357 int i, ret;
10358
10359 t4_write_reg(adap, SGE_CTXT_CMD_A, CTXTQID_V(cid) | CTXTTYPE_V(ctype));
10360 ret = t4_wait_op_done(adap, SGE_CTXT_CMD_A, BUSY_F, 0, 3, 1);
10361 if (!ret)
10362 for (i = SGE_CTXT_DATA0_A; i <= SGE_CTXT_DATA5_A; i += 4)
10363 *data++ = t4_read_reg(adap, i);
10364 return ret;
10365 }
10366
t4_sched_params(struct adapter * adapter,u8 type,u8 level,u8 mode,u8 rateunit,u8 ratemode,u8 channel,u8 class,u32 minrate,u32 maxrate,u16 weight,u16 pktsize,u16 burstsize)10367 int t4_sched_params(struct adapter *adapter, u8 type, u8 level, u8 mode,
10368 u8 rateunit, u8 ratemode, u8 channel, u8 class,
10369 u32 minrate, u32 maxrate, u16 weight, u16 pktsize,
10370 u16 burstsize)
10371 {
10372 struct fw_sched_cmd cmd;
10373
10374 memset(&cmd, 0, sizeof(cmd));
10375 cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_SCHED_CMD) |
10376 FW_CMD_REQUEST_F |
10377 FW_CMD_WRITE_F);
10378 cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
10379
10380 cmd.u.params.sc = FW_SCHED_SC_PARAMS;
10381 cmd.u.params.type = type;
10382 cmd.u.params.level = level;
10383 cmd.u.params.mode = mode;
10384 cmd.u.params.ch = channel;
10385 cmd.u.params.cl = class;
10386 cmd.u.params.unit = rateunit;
10387 cmd.u.params.rate = ratemode;
10388 cmd.u.params.min = cpu_to_be32(minrate);
10389 cmd.u.params.max = cpu_to_be32(maxrate);
10390 cmd.u.params.weight = cpu_to_be16(weight);
10391 cmd.u.params.pktsize = cpu_to_be16(pktsize);
10392 cmd.u.params.burstsize = cpu_to_be16(burstsize);
10393
10394 return t4_wr_mbox_meat(adapter, adapter->mbox, &cmd, sizeof(cmd),
10395 NULL, 1);
10396 }
10397
10398 /**
10399 * t4_i2c_rd - read I2C data from adapter
10400 * @adap: the adapter
10401 * @mbox: mailbox to use for the FW command
10402 * @port: Port number if per-port device; <0 if not
10403 * @devid: per-port device ID or absolute device ID
10404 * @offset: byte offset into device I2C space
10405 * @len: byte length of I2C space data
10406 * @buf: buffer in which to return I2C data
10407 *
10408 * Reads the I2C data from the indicated device and location.
10409 */
t4_i2c_rd(struct adapter * adap,unsigned int mbox,int port,unsigned int devid,unsigned int offset,unsigned int len,u8 * buf)10410 int t4_i2c_rd(struct adapter *adap, unsigned int mbox, int port,
10411 unsigned int devid, unsigned int offset,
10412 unsigned int len, u8 *buf)
10413 {
10414 struct fw_ldst_cmd ldst_cmd, ldst_rpl;
10415 unsigned int i2c_max = sizeof(ldst_cmd.u.i2c.data);
10416 int ret = 0;
10417
10418 if (len > I2C_PAGE_SIZE)
10419 return -EINVAL;
10420
10421 /* Dont allow reads that spans multiple pages */
10422 if (offset < I2C_PAGE_SIZE && offset + len > I2C_PAGE_SIZE)
10423 return -EINVAL;
10424
10425 memset(&ldst_cmd, 0, sizeof(ldst_cmd));
10426 ldst_cmd.op_to_addrspace =
10427 cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
10428 FW_CMD_REQUEST_F |
10429 FW_CMD_READ_F |
10430 FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_I2C));
10431 ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
10432 ldst_cmd.u.i2c.pid = (port < 0 ? 0xff : port);
10433 ldst_cmd.u.i2c.did = devid;
10434
10435 while (len > 0) {
10436 unsigned int i2c_len = (len < i2c_max) ? len : i2c_max;
10437
10438 ldst_cmd.u.i2c.boffset = offset;
10439 ldst_cmd.u.i2c.blen = i2c_len;
10440
10441 ret = t4_wr_mbox(adap, mbox, &ldst_cmd, sizeof(ldst_cmd),
10442 &ldst_rpl);
10443 if (ret)
10444 break;
10445
10446 memcpy(buf, ldst_rpl.u.i2c.data, i2c_len);
10447 offset += i2c_len;
10448 buf += i2c_len;
10449 len -= i2c_len;
10450 }
10451
10452 return ret;
10453 }
10454
10455 /**
10456 * t4_set_vlan_acl - Set a VLAN id for the specified VF
10457 * @adap: the adapter
10458 * @mbox: mailbox to use for the FW command
10459 * @vf: one of the VFs instantiated by the specified PF
10460 * @vlan: The vlanid to be set
10461 */
t4_set_vlan_acl(struct adapter * adap,unsigned int mbox,unsigned int vf,u16 vlan)10462 int t4_set_vlan_acl(struct adapter *adap, unsigned int mbox, unsigned int vf,
10463 u16 vlan)
10464 {
10465 struct fw_acl_vlan_cmd vlan_cmd;
10466 unsigned int enable;
10467
10468 enable = (vlan ? FW_ACL_VLAN_CMD_EN_F : 0);
10469 memset(&vlan_cmd, 0, sizeof(vlan_cmd));
10470 vlan_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_VLAN_CMD) |
10471 FW_CMD_REQUEST_F |
10472 FW_CMD_WRITE_F |
10473 FW_CMD_EXEC_F |
10474 FW_ACL_VLAN_CMD_PFN_V(adap->pf) |
10475 FW_ACL_VLAN_CMD_VFN_V(vf));
10476 vlan_cmd.en_to_len16 = cpu_to_be32(enable | FW_LEN16(vlan_cmd));
10477 /* Drop all packets that donot match vlan id */
10478 vlan_cmd.dropnovlan_fm = (enable
10479 ? (FW_ACL_VLAN_CMD_DROPNOVLAN_F |
10480 FW_ACL_VLAN_CMD_FM_F) : 0);
10481 if (enable != 0) {
10482 vlan_cmd.nvlan = 1;
10483 vlan_cmd.vlanid[0] = cpu_to_be16(vlan);
10484 }
10485
10486 return t4_wr_mbox(adap, adap->mbox, &vlan_cmd, sizeof(vlan_cmd), NULL);
10487 }
10488
10489 /**
10490 * modify_device_id - Modifies the device ID of the Boot BIOS image
10491 * @device_id: the device ID to write.
10492 * @boot_data: the boot image to modify.
10493 *
10494 * Write the supplied device ID to the boot BIOS image.
10495 */
modify_device_id(int device_id,u8 * boot_data)10496 static void modify_device_id(int device_id, u8 *boot_data)
10497 {
10498 struct cxgb4_pcir_data *pcir_header;
10499 struct legacy_pci_rom_hdr *header;
10500 u8 *cur_header = boot_data;
10501 u16 pcir_offset;
10502
10503 /* Loop through all chained images and change the device ID's */
10504 do {
10505 header = (struct legacy_pci_rom_hdr *)cur_header;
10506 pcir_offset = le16_to_cpu(header->pcir_offset);
10507 pcir_header = (struct cxgb4_pcir_data *)(cur_header +
10508 pcir_offset);
10509
10510 /**
10511 * Only modify the Device ID if code type is Legacy or HP.
10512 * 0x00: Okay to modify
10513 * 0x01: FCODE. Do not modify
10514 * 0x03: Okay to modify
10515 * 0x04-0xFF: Do not modify
10516 */
10517 if (pcir_header->code_type == CXGB4_HDR_CODE1) {
10518 u8 csum = 0;
10519 int i;
10520
10521 /**
10522 * Modify Device ID to match current adatper
10523 */
10524 pcir_header->device_id = cpu_to_le16(device_id);
10525
10526 /**
10527 * Set checksum temporarily to 0.
10528 * We will recalculate it later.
10529 */
10530 header->cksum = 0x0;
10531
10532 /**
10533 * Calculate and update checksum
10534 */
10535 for (i = 0; i < (header->size512 * 512); i++)
10536 csum += cur_header[i];
10537
10538 /**
10539 * Invert summed value to create the checksum
10540 * Writing new checksum value directly to the boot data
10541 */
10542 cur_header[7] = -csum;
10543
10544 } else if (pcir_header->code_type == CXGB4_HDR_CODE2) {
10545 /**
10546 * Modify Device ID to match current adatper
10547 */
10548 pcir_header->device_id = cpu_to_le16(device_id);
10549 }
10550
10551 /**
10552 * Move header pointer up to the next image in the ROM.
10553 */
10554 cur_header += header->size512 * 512;
10555 } while (!(pcir_header->indicator & CXGB4_HDR_INDI));
10556 }
10557
10558 /**
10559 * t4_load_boot - download boot flash
10560 * @adap: the adapter
10561 * @boot_data: the boot image to write
10562 * @boot_addr: offset in flash to write boot_data
10563 * @size: image size
10564 *
10565 * Write the supplied boot image to the card's serial flash.
10566 * The boot image has the following sections: a 28-byte header and the
10567 * boot image.
10568 */
t4_load_boot(struct adapter * adap,u8 * boot_data,unsigned int boot_addr,unsigned int size)10569 int t4_load_boot(struct adapter *adap, u8 *boot_data,
10570 unsigned int boot_addr, unsigned int size)
10571 {
10572 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
10573 unsigned int boot_sector = (boot_addr * 1024);
10574 struct cxgb4_pci_exp_rom_header *header;
10575 struct cxgb4_pcir_data *pcir_header;
10576 int pcir_offset;
10577 unsigned int i;
10578 u16 device_id;
10579 int ret, addr;
10580
10581 /**
10582 * Make sure the boot image does not encroach on the firmware region
10583 */
10584 if ((boot_sector + size) >> 16 > FLASH_FW_START_SEC) {
10585 dev_err(adap->pdev_dev, "boot image encroaching on firmware region\n");
10586 return -EFBIG;
10587 }
10588
10589 /* Get boot header */
10590 header = (struct cxgb4_pci_exp_rom_header *)boot_data;
10591 pcir_offset = le16_to_cpu(header->pcir_offset);
10592 /* PCIR Data Structure */
10593 pcir_header = (struct cxgb4_pcir_data *)&boot_data[pcir_offset];
10594
10595 /**
10596 * Perform some primitive sanity testing to avoid accidentally
10597 * writing garbage over the boot sectors. We ought to check for
10598 * more but it's not worth it for now ...
10599 */
10600 if (size < BOOT_MIN_SIZE || size > BOOT_MAX_SIZE) {
10601 dev_err(adap->pdev_dev, "boot image too small/large\n");
10602 return -EFBIG;
10603 }
10604
10605 if (le16_to_cpu(header->signature) != BOOT_SIGNATURE) {
10606 dev_err(adap->pdev_dev, "Boot image missing signature\n");
10607 return -EINVAL;
10608 }
10609
10610 /* Check PCI header signature */
10611 if (le32_to_cpu(pcir_header->signature) != PCIR_SIGNATURE) {
10612 dev_err(adap->pdev_dev, "PCI header missing signature\n");
10613 return -EINVAL;
10614 }
10615
10616 /* Check Vendor ID matches Chelsio ID*/
10617 if (le16_to_cpu(pcir_header->vendor_id) != PCI_VENDOR_ID_CHELSIO) {
10618 dev_err(adap->pdev_dev, "Vendor ID missing signature\n");
10619 return -EINVAL;
10620 }
10621
10622 /**
10623 * The boot sector is comprised of the Expansion-ROM boot, iSCSI boot,
10624 * and Boot configuration data sections. These 3 boot sections span
10625 * sectors 0 to 7 in flash and live right before the FW image location.
10626 */
10627 i = DIV_ROUND_UP(size ? size : FLASH_FW_START, sf_sec_size);
10628 ret = t4_flash_erase_sectors(adap, boot_sector >> 16,
10629 (boot_sector >> 16) + i - 1);
10630
10631 /**
10632 * If size == 0 then we're simply erasing the FLASH sectors associated
10633 * with the on-adapter option ROM file
10634 */
10635 if (ret || size == 0)
10636 goto out;
10637 /* Retrieve adapter's device ID */
10638 pci_read_config_word(adap->pdev, PCI_DEVICE_ID, &device_id);
10639 /* Want to deal with PF 0 so I strip off PF 4 indicator */
10640 device_id = device_id & 0xf0ff;
10641
10642 /* Check PCIE Device ID */
10643 if (le16_to_cpu(pcir_header->device_id) != device_id) {
10644 /**
10645 * Change the device ID in the Boot BIOS image to match
10646 * the Device ID of the current adapter.
10647 */
10648 modify_device_id(device_id, boot_data);
10649 }
10650
10651 /**
10652 * Skip over the first SF_PAGE_SIZE worth of data and write it after
10653 * we finish copying the rest of the boot image. This will ensure
10654 * that the BIOS boot header will only be written if the boot image
10655 * was written in full.
10656 */
10657 addr = boot_sector;
10658 for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
10659 addr += SF_PAGE_SIZE;
10660 boot_data += SF_PAGE_SIZE;
10661 ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data,
10662 false);
10663 if (ret)
10664 goto out;
10665 }
10666
10667 ret = t4_write_flash(adap, boot_sector, SF_PAGE_SIZE,
10668 (const u8 *)header, false);
10669
10670 out:
10671 if (ret)
10672 dev_err(adap->pdev_dev, "boot image load failed, error %d\n",
10673 ret);
10674 return ret;
10675 }
10676
10677 /**
10678 * t4_flash_bootcfg_addr - return the address of the flash
10679 * optionrom configuration
10680 * @adapter: the adapter
10681 *
10682 * Return the address within the flash where the OptionROM Configuration
10683 * is stored, or an error if the device FLASH is too small to contain
10684 * a OptionROM Configuration.
10685 */
t4_flash_bootcfg_addr(struct adapter * adapter)10686 static int t4_flash_bootcfg_addr(struct adapter *adapter)
10687 {
10688 /**
10689 * If the device FLASH isn't large enough to hold a Firmware
10690 * Configuration File, return an error.
10691 */
10692 if (adapter->params.sf_size <
10693 FLASH_BOOTCFG_START + FLASH_BOOTCFG_MAX_SIZE)
10694 return -ENOSPC;
10695
10696 return FLASH_BOOTCFG_START;
10697 }
10698
t4_load_bootcfg(struct adapter * adap,const u8 * cfg_data,unsigned int size)10699 int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
10700 {
10701 unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
10702 struct cxgb4_bootcfg_data *header;
10703 unsigned int flash_cfg_start_sec;
10704 unsigned int addr, npad;
10705 int ret, i, n, cfg_addr;
10706
10707 cfg_addr = t4_flash_bootcfg_addr(adap);
10708 if (cfg_addr < 0)
10709 return cfg_addr;
10710
10711 addr = cfg_addr;
10712 flash_cfg_start_sec = addr / SF_SEC_SIZE;
10713
10714 if (size > FLASH_BOOTCFG_MAX_SIZE) {
10715 dev_err(adap->pdev_dev, "bootcfg file too large, max is %u bytes\n",
10716 FLASH_BOOTCFG_MAX_SIZE);
10717 return -EFBIG;
10718 }
10719
10720 header = (struct cxgb4_bootcfg_data *)cfg_data;
10721 if (le16_to_cpu(header->signature) != BOOT_CFG_SIG) {
10722 dev_err(adap->pdev_dev, "Wrong bootcfg signature\n");
10723 ret = -EINVAL;
10724 goto out;
10725 }
10726
10727 i = DIV_ROUND_UP(FLASH_BOOTCFG_MAX_SIZE,
10728 sf_sec_size);
10729 ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
10730 flash_cfg_start_sec + i - 1);
10731
10732 /**
10733 * If size == 0 then we're simply erasing the FLASH sectors associated
10734 * with the on-adapter OptionROM Configuration File.
10735 */
10736 if (ret || size == 0)
10737 goto out;
10738
10739 /* this will write to the flash up to SF_PAGE_SIZE at a time */
10740 for (i = 0; i < size; i += SF_PAGE_SIZE) {
10741 n = min_t(u32, size - i, SF_PAGE_SIZE);
10742
10743 ret = t4_write_flash(adap, addr, n, cfg_data, false);
10744 if (ret)
10745 goto out;
10746
10747 addr += SF_PAGE_SIZE;
10748 cfg_data += SF_PAGE_SIZE;
10749 }
10750
10751 npad = ((size + 4 - 1) & ~3) - size;
10752 for (i = 0; i < npad; i++) {
10753 u8 data = 0;
10754
10755 ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data,
10756 false);
10757 if (ret)
10758 goto out;
10759 }
10760
10761 out:
10762 if (ret)
10763 dev_err(adap->pdev_dev, "boot config data %s failed %d\n",
10764 (size == 0 ? "clear" : "download"), ret);
10765 return ret;
10766 }
10767