1 /*-
2 * SPDX-License-Identifier: BSD-3-Clause
3 *
4 * Copyright (c) 2008, 2009 Yahoo!, Inc.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The names of the authors may not be used to endorse or promote
16 * products derived from this software without specific prior written
17 * permission.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 * SUCH DAMAGE.
30 */
31
32 #include <sys/param.h>
33
34 #include <err.h>
35 #include <errno.h>
36 #include <stdio.h>
37 #include <stdlib.h>
38 #include <string.h>
39 #include <unistd.h>
40 #include <paths.h>
41 #include "mfiutil.h"
42
43 SET_DECLARE(MFI_DATASET(top), struct mfiutil_command);
44
45 MFI_TABLE(top, start);
46 MFI_TABLE(top, stop);
47 MFI_TABLE(top, abort);
48
49 char *mfi_device = NULL;
50 u_int mfi_opts;
51 static int fw_name_width, fw_version_width, fw_date_width, fw_time_width;
52
53 static void
usage(void)54 usage(void)
55 {
56
57 fprintf(stderr, "usage: %s [-de] [-D device] [-u unit] [-t type] <command> ...\n\n", getprogname());
58 fprintf(stderr, "Commands include:\n");
59 fprintf(stderr, " version\n");
60 fprintf(stderr, " show adapter - display controller information\n");
61 fprintf(stderr, " show battery - display battery information\n");
62 fprintf(stderr, " show config - display RAID configuration\n");
63 fprintf(stderr, " show drives - list physical drives\n");
64 fprintf(stderr, " show events - display event log\n");
65 fprintf(stderr, " show firmware - list firmware images\n");
66 fprintf(stderr, " show foreign - display detected foreign volumes\n");
67 fprintf(stderr, " show logstate - display event log sequence numbers\n");
68 fprintf(stderr, " show volumes - list logical volumes\n");
69 fprintf(stderr, " show patrol - display patrol read status\n");
70 fprintf(stderr, " show progress - display status of active operations\n");
71 fprintf(stderr, " fail <drive> - fail a physical drive\n");
72 fprintf(stderr, " good <drive> - set a failed/SYSPD drive as UNCONFIGURED\n");
73 fprintf(stderr, " rebuild <drive> - mark failed drive ready for rebuild\n");
74 fprintf(stderr, " syspd <drive> - set drive into use as SYSPD JBOD\n");
75 fprintf(stderr, " drive progress <drive> - display status of active operations\n");
76 fprintf(stderr, " drive clear <drive> <start|stop> - clear a drive with all 0x00\n");
77 fprintf(stderr, " start rebuild <drive>\n");
78 fprintf(stderr, " abort rebuild <drive>\n");
79 fprintf(stderr, " locate <drive> <on|off> - toggle drive LED\n");
80 fprintf(stderr, " cache <volume> [command [setting]]\n");
81 fprintf(stderr, " name <volume> <name>\n");
82 fprintf(stderr, " volume progress <volume> - display status of active operations\n");
83 fprintf(stderr, " clear - clear volume configuration\n");
84 fprintf(stderr, " create <type> [-v] [-s stripe_size] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]\n");
85 fprintf(stderr, " delete <volume>\n");
86 fprintf(stderr, " add <drive> [volume] - add a hot spare\n");
87 fprintf(stderr, " remove <drive> - remove a hot spare\n");
88 fprintf(stderr, " patrol <disable|auto|manual> [interval [start]]\n");
89 fprintf(stderr, " start patrol - start a patrol read\n");
90 fprintf(stderr, " stop patrol - stop a patrol read\n");
91 fprintf(stderr, " foreign scan - scan for foreign configurations\n");
92 fprintf(stderr, " foreign clear [volume] - clear foreign configurations (default all)\n");
93 fprintf(stderr, " foreign diag [volume] - diagnostic display foreign configurations (default all)\n");
94 fprintf(stderr, " foreign preview [volume] - preview foreign configurations (default all)\n");
95 fprintf(stderr, " foreign import [volume] - import foreign configurations (default all)\n");
96 fprintf(stderr, " flash <firmware>\n");
97 fprintf(stderr, " start learn - start a BBU relearn\n");
98 fprintf(stderr, " bbu <setting> <value> - set BBU properties\n");
99 fprintf(stderr, " ctrlprop rebuild [rate] - get/set the volume rebuild rate\n");
100 fprintf(stderr, " ctrlprop alarm [0/1] - enable/disable controller alarms\n");
101 #ifdef DEBUG
102 fprintf(stderr, " debug - debug 'show config'\n");
103 fprintf(stderr, " dump - display 'saved' config\n");
104 #endif
105 exit(1);
106 }
107
108 static int
version(int ac __unused,char ** av __unused)109 version(int ac __unused, char **av __unused)
110 {
111
112 printf("mfiutil version 1.0.15");
113 #ifdef DEBUG
114 printf(" (DEBUG)");
115 #endif
116 printf("\n");
117 return (0);
118 }
119 MFI_COMMAND(top, version, version);
120
121 int
main(int ac,char ** av)122 main(int ac, char **av)
123 {
124 struct mfiutil_command **cmd;
125 int ch, mfi_unit;
126 const char *pn, *mfi_type;
127 char *temp;
128
129 mfi_unit = 0;
130
131 pn = getprogname();
132
133 if (strcmp(pn, "mrsasutil") == 0)
134 mfi_type = MRSAS_TYPE;
135 else
136 mfi_type = MFI_TYPE;
137
138 while ((ch = getopt(ac, av, "D:det:u:")) != -1) {
139 switch (ch) {
140 case 'D':
141 mfi_device = optarg;
142 break;
143 case 'd':
144 mfi_opts |= MFI_DNAME_DEVICE_ID;
145 break;
146 case 'e':
147 mfi_opts |= MFI_DNAME_ES;
148 break;
149 case 'u':
150 mfi_unit = atoi(optarg);
151 break;
152 case 't':
153 mfi_type = optarg;
154 break;
155 case '?':
156 usage();
157 }
158 }
159
160 if (mfi_device == NULL) {
161 if (asprintf(&mfi_device, "%s%s%d", _PATH_DEV, mfi_type,
162 mfi_unit) < 0)
163 errx(1, "Can't allocate memory for device name\n");
164 } else {
165 if (strncmp(mfi_device, _PATH_DEV, strlen(_PATH_DEV)) != 0) {
166 if (asprintf(&temp, "%s%s%d", _PATH_DEV, mfi_type,
167 mfi_unit) < 0)
168 errx(1, "Can't allocate memory for device name\n");
169 mfi_device = temp;
170 }
171 }
172
173 av += optind;
174 ac -= optind;
175
176 /* getopt() eats av[0], so we can't use mfi_table_handler() directly. */
177 if (ac == 0)
178 usage();
179
180 SET_FOREACH(cmd, MFI_DATASET(top)) {
181 if (strcmp((*cmd)->name, av[0]) == 0) {
182 if ((*cmd)->handler(ac, av))
183 return (1);
184 else
185 return (0);
186 }
187 }
188 warnx("Unknown command %s.", av[0]);
189 return (1);
190 }
191
192 void
scan_firmware(struct mfi_info_component * comp)193 scan_firmware(struct mfi_info_component *comp)
194 {
195 int len;
196
197 len = strlen(comp->name);
198 if (fw_name_width < len)
199 fw_name_width = len;
200 len = strlen(comp->version);
201 if (fw_version_width < len)
202 fw_version_width = len;
203 len = strlen(comp->build_date);
204 if (fw_date_width < len)
205 fw_date_width = len;
206 len = strlen(comp->build_time);
207 if (fw_time_width < len)
208 fw_time_width = len;
209 }
210
211 void
display_firmware(struct mfi_info_component * comp,const char * tag)212 display_firmware(struct mfi_info_component *comp, const char *tag)
213 {
214
215 printf("%-*s %-*s %-*s %-*s %s\n", fw_name_width, comp->name,
216 fw_version_width, comp->version, fw_date_width, comp->build_date,
217 fw_time_width, comp->build_time, tag);
218 }
219