1 /*
2 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
3 *
4 * Copyright (c) 2008-2009 USI Co., Ltd.
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
14 * substantially similar to the "NO WARRANTY" disclaimer below
15 * ("Disclaimer") and any redistribution must be conditioned upon
16 * including a substantially similar Disclaimer requirement for further
17 * binary redistribution.
18 * 3. Neither the names of the above-listed copyright holders nor the names
19 * of any contributors may be used to endorse or promote products derived
20 * from this software without specific prior written permission.
21 *
22 * Alternatively, this software may be distributed under the terms of the
23 * GNU General Public License ("GPL") version 2 as published by the Free
24 * Software Foundation.
25 *
26 * NO WARRANTY
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
37 * POSSIBILITY OF SUCH DAMAGES.
38 *
39 */
40
41 #include <linux/slab.h>
42 #include "pm8001_sas.h"
43 #include "pm80xx_tracepoints.h"
44
45 /**
46 * pm8001_find_tag - from sas task to find out tag that belongs to this task
47 * @task: the task sent to the LLDD
48 * @tag: the found tag associated with the task
49 */
pm8001_find_tag(struct sas_task * task,u32 * tag)50 static int pm8001_find_tag(struct sas_task *task, u32 *tag)
51 {
52 if (task->lldd_task) {
53 struct pm8001_ccb_info *ccb;
54 ccb = task->lldd_task;
55 *tag = ccb->ccb_tag;
56 return 1;
57 }
58 return 0;
59 }
60
61 /**
62 * pm8001_tag_free - free the no more needed tag
63 * @pm8001_ha: our hba struct
64 * @tag: the found tag associated with the task
65 */
pm8001_tag_free(struct pm8001_hba_info * pm8001_ha,u32 tag)66 void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
67 {
68 void *bitmap = pm8001_ha->rsvd_tags;
69 unsigned long flags;
70
71 if (tag >= PM8001_RESERVE_SLOT)
72 return;
73
74 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
75 __clear_bit(tag, bitmap);
76 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
77 }
78
79 /**
80 * pm8001_tag_alloc - allocate a empty tag for task used.
81 * @pm8001_ha: our hba struct
82 * @tag_out: the found empty tag .
83 */
pm8001_tag_alloc(struct pm8001_hba_info * pm8001_ha,u32 * tag_out)84 int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
85 {
86 void *bitmap = pm8001_ha->rsvd_tags;
87 unsigned long flags;
88 unsigned int tag;
89
90 spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
91 tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT);
92 if (tag >= PM8001_RESERVE_SLOT) {
93 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
94 return -SAS_QUEUE_FULL;
95 }
96 __set_bit(tag, bitmap);
97 spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
98
99 /* reserved tags are in the lower region of the tagset */
100 *tag_out = tag;
101 return 0;
102 }
103
104 /**
105 * pm8001_mem_alloc - allocate memory for pm8001.
106 * @pdev: pci device.
107 * @virt_addr: the allocated virtual address
108 * @pphys_addr: DMA address for this device
109 * @pphys_addr_hi: the physical address high byte address.
110 * @pphys_addr_lo: the physical address low byte address.
111 * @mem_size: memory size.
112 * @align: requested byte alignment
113 */
pm8001_mem_alloc(struct pci_dev * pdev,void ** virt_addr,dma_addr_t * pphys_addr,u32 * pphys_addr_hi,u32 * pphys_addr_lo,u32 mem_size,u32 align)114 int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
115 dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
116 u32 *pphys_addr_lo, u32 mem_size, u32 align)
117 {
118 caddr_t mem_virt_alloc;
119 dma_addr_t mem_dma_handle;
120 u64 phys_align;
121 u64 align_offset = 0;
122 if (align)
123 align_offset = (dma_addr_t)align - 1;
124 mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align,
125 &mem_dma_handle, GFP_KERNEL);
126 if (!mem_virt_alloc)
127 return -ENOMEM;
128 *pphys_addr = mem_dma_handle;
129 phys_align = (*pphys_addr + align_offset) & ~align_offset;
130 *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
131 *pphys_addr_hi = upper_32_bits(phys_align);
132 *pphys_addr_lo = lower_32_bits(phys_align);
133 return 0;
134 }
135
136 /**
137 * pm8001_find_ha_by_dev - from domain device which come from sas layer to
138 * find out our hba struct.
139 * @dev: the domain device which from sas layer.
140 */
141 static
pm8001_find_ha_by_dev(struct domain_device * dev)142 struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
143 {
144 struct sas_ha_struct *sha = dev->port->ha;
145 struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
146 return pm8001_ha;
147 }
148
149 /**
150 * pm8001_phy_control - this function should be registered to
151 * sas_domain_function_template to provide libsas used, note: this is just
152 * control the HBA phy rather than other expander phy if you want control
153 * other phy, you should use SMP command.
154 * @sas_phy: which phy in HBA phys.
155 * @func: the operation.
156 * @funcdata: always NULL.
157 */
pm8001_phy_control(struct asd_sas_phy * sas_phy,enum phy_func func,void * funcdata)158 int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
159 void *funcdata)
160 {
161 int rc = 0, phy_id = sas_phy->id;
162 struct pm8001_hba_info *pm8001_ha = NULL;
163 struct sas_phy_linkrates *rates;
164 struct pm8001_phy *phy;
165 DECLARE_COMPLETION_ONSTACK(completion);
166 unsigned long flags;
167 pm8001_ha = sas_phy->ha->lldd_ha;
168 phy = &pm8001_ha->phy[phy_id];
169
170 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
171 /*
172 * If the controller is in fatal error state,
173 * we will not get a response from the controller
174 */
175 pm8001_dbg(pm8001_ha, FAIL,
176 "Phy control failed due to fatal errors\n");
177 return -EFAULT;
178 }
179
180 switch (func) {
181 case PHY_FUNC_SET_LINK_RATE:
182 rates = funcdata;
183 if (rates->minimum_linkrate) {
184 pm8001_ha->phy[phy_id].minimum_linkrate =
185 rates->minimum_linkrate;
186 }
187 if (rates->maximum_linkrate) {
188 pm8001_ha->phy[phy_id].maximum_linkrate =
189 rates->maximum_linkrate;
190 }
191 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
192 pm8001_ha->phy[phy_id].enable_completion = &completion;
193 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
194 wait_for_completion(&completion);
195 }
196 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
197 PHY_LINK_RESET);
198 break;
199 case PHY_FUNC_HARD_RESET:
200 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
201 pm8001_ha->phy[phy_id].enable_completion = &completion;
202 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
203 wait_for_completion(&completion);
204 }
205 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
206 PHY_HARD_RESET);
207 break;
208 case PHY_FUNC_LINK_RESET:
209 if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
210 pm8001_ha->phy[phy_id].enable_completion = &completion;
211 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
212 wait_for_completion(&completion);
213 }
214 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
215 PHY_LINK_RESET);
216 break;
217 case PHY_FUNC_RELEASE_SPINUP_HOLD:
218 PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
219 PHY_LINK_RESET);
220 break;
221 case PHY_FUNC_DISABLE:
222 if (pm8001_ha->chip_id != chip_8001) {
223 if (pm8001_ha->phy[phy_id].phy_state ==
224 PHY_STATE_LINK_UP_SPCV) {
225 sas_phy_disconnected(&phy->sas_phy);
226 sas_notify_phy_event(&phy->sas_phy,
227 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
228 phy->phy_attached = 0;
229 }
230 } else {
231 if (pm8001_ha->phy[phy_id].phy_state ==
232 PHY_STATE_LINK_UP_SPC) {
233 sas_phy_disconnected(&phy->sas_phy);
234 sas_notify_phy_event(&phy->sas_phy,
235 PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
236 phy->phy_attached = 0;
237 }
238 }
239 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
240 break;
241 case PHY_FUNC_GET_EVENTS:
242 spin_lock_irqsave(&pm8001_ha->lock, flags);
243 if (pm8001_ha->chip_id == chip_8001) {
244 if (-1 == pm8001_bar4_shift(pm8001_ha,
245 (phy_id < 4) ? 0x30000 : 0x40000)) {
246 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
247 return -EINVAL;
248 }
249 }
250 {
251 struct sas_phy *phy = sas_phy->phy;
252 u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr
253 + 0x1034 + (0x4000 * (phy_id & 3));
254
255 phy->invalid_dword_count = readl(qp);
256 phy->running_disparity_error_count = readl(&qp[1]);
257 phy->loss_of_dword_sync_count = readl(&qp[3]);
258 phy->phy_reset_problem_count = readl(&qp[4]);
259 }
260 if (pm8001_ha->chip_id == chip_8001)
261 pm8001_bar4_shift(pm8001_ha, 0);
262 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
263 return 0;
264 default:
265 pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func);
266 rc = -EOPNOTSUPP;
267 }
268 msleep(300);
269 return rc;
270 }
271
272 /**
273 * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
274 * command to HBA.
275 * @shost: the scsi host data.
276 */
pm8001_scan_start(struct Scsi_Host * shost)277 void pm8001_scan_start(struct Scsi_Host *shost)
278 {
279 int i;
280 struct pm8001_hba_info *pm8001_ha;
281 struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
282 DECLARE_COMPLETION_ONSTACK(completion);
283 pm8001_ha = sha->lldd_ha;
284 /* SAS_RE_INITIALIZATION not available in SPCv/ve */
285 if (pm8001_ha->chip_id == chip_8001)
286 PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
287 for (i = 0; i < pm8001_ha->chip->n_phy; ++i) {
288 pm8001_ha->phy[i].enable_completion = &completion;
289 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
290 wait_for_completion(&completion);
291 msleep(300);
292 }
293 }
294
pm8001_scan_finished(struct Scsi_Host * shost,unsigned long time)295 int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
296 {
297 struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
298
299 /* give the phy enabling interrupt event time to come in (1s
300 * is empirically about all it takes) */
301 if (time < HZ)
302 return 0;
303 /* Wait for discovery to finish */
304 sas_drain_work(ha);
305 return 1;
306 }
307
308 /**
309 * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
310 * @pm8001_ha: our hba card information
311 * @ccb: the ccb which attached to smp task
312 */
pm8001_task_prep_smp(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)313 static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
314 struct pm8001_ccb_info *ccb)
315 {
316 return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
317 }
318
pm8001_get_ncq_tag(struct sas_task * task,u32 * tag)319 u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
320 {
321 struct ata_queued_cmd *qc = task->uldd_task;
322
323 if (qc && ata_is_ncq(qc->tf.protocol)) {
324 *tag = qc->tag;
325 return 1;
326 }
327
328 return 0;
329 }
330
331 /**
332 * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
333 * @pm8001_ha: our hba card information
334 * @ccb: the ccb which attached to sata task
335 */
pm8001_task_prep_ata(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)336 static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
337 struct pm8001_ccb_info *ccb)
338 {
339 return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
340 }
341
342 /**
343 * pm8001_task_prep_internal_abort - the dispatcher function, prepare data
344 * for internal abort task
345 * @pm8001_ha: our hba card information
346 * @ccb: the ccb which attached to sata task
347 */
pm8001_task_prep_internal_abort(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)348 static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha,
349 struct pm8001_ccb_info *ccb)
350 {
351 return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb);
352 }
353
354 /**
355 * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
356 * @pm8001_ha: our hba card information
357 * @ccb: the ccb which attached to TM
358 * @tmf: the task management IU
359 */
pm8001_task_prep_ssp_tm(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb,struct sas_tmf_task * tmf)360 static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
361 struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf)
362 {
363 return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
364 }
365
366 /**
367 * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task
368 * @pm8001_ha: our hba card information
369 * @ccb: the ccb which attached to ssp task
370 */
pm8001_task_prep_ssp(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)371 static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
372 struct pm8001_ccb_info *ccb)
373 {
374 return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
375 }
376
377 /* Find the local port id that's attached to this device */
sas_find_local_port_id(struct domain_device * dev)378 static int sas_find_local_port_id(struct domain_device *dev)
379 {
380 struct domain_device *pdev = dev->parent;
381
382 /* Directly attached device */
383 if (!pdev)
384 return dev->port->id;
385 while (pdev) {
386 struct domain_device *pdev_p = pdev->parent;
387 if (!pdev_p)
388 return pdev->port->id;
389 pdev = pdev->parent;
390 }
391 return 0;
392 }
393
394 #define DEV_IS_GONE(pm8001_dev) \
395 ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
396
397
pm8001_deliver_command(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)398 static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha,
399 struct pm8001_ccb_info *ccb)
400 {
401 struct sas_task *task = ccb->task;
402 enum sas_protocol task_proto = task->task_proto;
403 struct sas_tmf_task *tmf = task->tmf;
404 int is_tmf = !!tmf;
405
406 switch (task_proto) {
407 case SAS_PROTOCOL_SMP:
408 return pm8001_task_prep_smp(pm8001_ha, ccb);
409 case SAS_PROTOCOL_SSP:
410 if (is_tmf)
411 return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf);
412 return pm8001_task_prep_ssp(pm8001_ha, ccb);
413 case SAS_PROTOCOL_SATA:
414 case SAS_PROTOCOL_STP:
415 return pm8001_task_prep_ata(pm8001_ha, ccb);
416 case SAS_PROTOCOL_INTERNAL_ABORT:
417 return pm8001_task_prep_internal_abort(pm8001_ha, ccb);
418 default:
419 dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n",
420 task_proto);
421 }
422
423 return -EINVAL;
424 }
425
426 /**
427 * pm8001_queue_command - register for upper layer used, all IO commands sent
428 * to HBA are from this interface.
429 * @task: the task to be execute.
430 * @gfp_flags: gfp_flags
431 */
pm8001_queue_command(struct sas_task * task,gfp_t gfp_flags)432 int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
433 {
434 struct task_status_struct *ts = &task->task_status;
435 enum sas_protocol task_proto = task->task_proto;
436 struct domain_device *dev = task->dev;
437 struct pm8001_device *pm8001_dev = dev->lldd_dev;
438 bool internal_abort = sas_is_internal_abort(task);
439 struct pm8001_hba_info *pm8001_ha;
440 struct pm8001_port *port = NULL;
441 struct pm8001_ccb_info *ccb;
442 unsigned long flags;
443 u32 n_elem = 0;
444 int rc = 0;
445
446 if (!internal_abort && !dev->port) {
447 ts->resp = SAS_TASK_UNDELIVERED;
448 ts->stat = SAS_PHY_DOWN;
449 if (dev->dev_type != SAS_SATA_DEV)
450 task->task_done(task);
451 return 0;
452 }
453
454 pm8001_ha = pm8001_find_ha_by_dev(dev);
455 if (pm8001_ha->controller_fatal_error) {
456 ts->resp = SAS_TASK_UNDELIVERED;
457 task->task_done(task);
458 return 0;
459 }
460
461 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n");
462
463 spin_lock_irqsave(&pm8001_ha->lock, flags);
464
465 pm8001_dev = dev->lldd_dev;
466 port = &pm8001_ha->port[sas_find_local_port_id(dev)];
467
468 if (!internal_abort &&
469 (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) {
470 ts->resp = SAS_TASK_UNDELIVERED;
471 ts->stat = SAS_PHY_DOWN;
472 if (sas_protocol_ata(task_proto)) {
473 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
474 task->task_done(task);
475 spin_lock_irqsave(&pm8001_ha->lock, flags);
476 } else {
477 task->task_done(task);
478 }
479 rc = -ENODEV;
480 goto err_out;
481 }
482
483 ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task);
484 if (!ccb) {
485 rc = -SAS_QUEUE_FULL;
486 goto err_out;
487 }
488
489 if (!sas_protocol_ata(task_proto)) {
490 if (task->num_scatter) {
491 n_elem = dma_map_sg(pm8001_ha->dev, task->scatter,
492 task->num_scatter, task->data_dir);
493 if (!n_elem) {
494 rc = -ENOMEM;
495 goto err_out_ccb;
496 }
497 }
498 } else {
499 n_elem = task->num_scatter;
500 }
501
502 task->lldd_task = ccb;
503 ccb->n_elem = n_elem;
504
505 atomic_inc(&pm8001_dev->running_req);
506
507 rc = pm8001_deliver_command(pm8001_ha, ccb);
508 if (rc) {
509 atomic_dec(&pm8001_dev->running_req);
510 if (!sas_protocol_ata(task_proto) && n_elem)
511 dma_unmap_sg(pm8001_ha->dev, task->scatter,
512 task->num_scatter, task->data_dir);
513 err_out_ccb:
514 pm8001_ccb_free(pm8001_ha, ccb);
515
516 err_out:
517 pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc);
518 }
519
520 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
521
522 return rc;
523 }
524
525 /**
526 * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
527 * @pm8001_ha: our hba card information
528 * @ccb: the ccb which attached to ssp task to free
529 */
pm8001_ccb_task_free(struct pm8001_hba_info * pm8001_ha,struct pm8001_ccb_info * ccb)530 void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
531 struct pm8001_ccb_info *ccb)
532 {
533 struct sas_task *task = ccb->task;
534 struct ata_queued_cmd *qc;
535 struct pm8001_device *pm8001_dev;
536
537 if (!task)
538 return;
539
540 if (!sas_protocol_ata(task->task_proto) && ccb->n_elem)
541 dma_unmap_sg(pm8001_ha->dev, task->scatter,
542 task->num_scatter, task->data_dir);
543
544 switch (task->task_proto) {
545 case SAS_PROTOCOL_SMP:
546 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
547 DMA_FROM_DEVICE);
548 dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
549 DMA_TO_DEVICE);
550 break;
551
552 case SAS_PROTOCOL_SATA:
553 case SAS_PROTOCOL_STP:
554 case SAS_PROTOCOL_SSP:
555 default:
556 /* do nothing */
557 break;
558 }
559
560 if (sas_protocol_ata(task->task_proto)) {
561 /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */
562 qc = task->uldd_task;
563 pm8001_dev = ccb->device;
564 trace_pm80xx_request_complete(pm8001_ha->id,
565 pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS,
566 ccb->ccb_tag, 0 /* ctlr_opcode not known */,
567 qc ? qc->tf.command : 0, // ata opcode
568 pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1);
569 }
570
571 task->lldd_task = NULL;
572 pm8001_ccb_free(pm8001_ha, ccb);
573 }
574
575 /**
576 * pm8001_alloc_dev - find a empty pm8001_device
577 * @pm8001_ha: our hba card information
578 */
pm8001_alloc_dev(struct pm8001_hba_info * pm8001_ha)579 static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
580 {
581 u32 dev;
582 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
583 if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
584 pm8001_ha->devices[dev].id = dev;
585 return &pm8001_ha->devices[dev];
586 }
587 }
588 if (dev == PM8001_MAX_DEVICES) {
589 pm8001_dbg(pm8001_ha, FAIL,
590 "max support %d devices, ignore ..\n",
591 PM8001_MAX_DEVICES);
592 }
593 return NULL;
594 }
595 /**
596 * pm8001_find_dev - find a matching pm8001_device
597 * @pm8001_ha: our hba card information
598 * @device_id: device ID to match against
599 */
pm8001_find_dev(struct pm8001_hba_info * pm8001_ha,u32 device_id)600 struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
601 u32 device_id)
602 {
603 u32 dev;
604 for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
605 if (pm8001_ha->devices[dev].device_id == device_id)
606 return &pm8001_ha->devices[dev];
607 }
608 if (dev == PM8001_MAX_DEVICES) {
609 pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n");
610 }
611 return NULL;
612 }
613
pm8001_free_dev(struct pm8001_device * pm8001_dev)614 void pm8001_free_dev(struct pm8001_device *pm8001_dev)
615 {
616 u32 id = pm8001_dev->id;
617 memset(pm8001_dev, 0, sizeof(*pm8001_dev));
618 pm8001_dev->id = id;
619 pm8001_dev->dev_type = SAS_PHY_UNUSED;
620 pm8001_dev->device_id = PM8001_MAX_DEVICES;
621 pm8001_dev->sas_device = NULL;
622 }
623
624 /**
625 * pm8001_dev_found_notify - libsas notify a device is found.
626 * @dev: the device structure which sas layer used.
627 *
628 * when libsas find a sas domain device, it should tell the LLDD that
629 * device is found, and then LLDD register this device to HBA firmware
630 * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
631 * device ID(according to device's sas address) and returned it to LLDD. From
632 * now on, we communicate with HBA FW with the device ID which HBA assigned
633 * rather than sas address. it is the necessary step for our HBA but it is
634 * the optional for other HBA driver.
635 */
pm8001_dev_found_notify(struct domain_device * dev)636 static int pm8001_dev_found_notify(struct domain_device *dev)
637 {
638 unsigned long flags = 0;
639 int res = 0;
640 struct pm8001_hba_info *pm8001_ha = NULL;
641 struct domain_device *parent_dev = dev->parent;
642 struct pm8001_device *pm8001_device;
643 DECLARE_COMPLETION_ONSTACK(completion);
644 u32 flag = 0;
645 pm8001_ha = pm8001_find_ha_by_dev(dev);
646 spin_lock_irqsave(&pm8001_ha->lock, flags);
647
648 pm8001_device = pm8001_alloc_dev(pm8001_ha);
649 if (!pm8001_device) {
650 res = -1;
651 goto found_out;
652 }
653 pm8001_device->sas_device = dev;
654 dev->lldd_dev = pm8001_device;
655 pm8001_device->dev_type = dev->dev_type;
656 pm8001_device->dcompletion = &completion;
657 if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
658 int phy_id;
659
660 phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev);
661 if (phy_id < 0) {
662 pm8001_dbg(pm8001_ha, FAIL,
663 "Error: no attached dev:%016llx at ex:%016llx.\n",
664 SAS_ADDR(dev->sas_addr),
665 SAS_ADDR(parent_dev->sas_addr));
666 res = phy_id;
667 } else {
668 pm8001_device->attached_phy = phy_id;
669 }
670 } else {
671 if (dev->dev_type == SAS_SATA_DEV) {
672 pm8001_device->attached_phy =
673 dev->rphy->identify.phy_identifier;
674 flag = 1; /* directly sata */
675 }
676 } /*register this device to HBA*/
677 pm8001_dbg(pm8001_ha, DISC, "Found device\n");
678 PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
679 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
680 wait_for_completion(&completion);
681 if (dev->dev_type == SAS_END_DEVICE)
682 msleep(50);
683 pm8001_ha->flags = PM8001F_RUN_TIME;
684 return 0;
685 found_out:
686 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
687 return res;
688 }
689
pm8001_dev_found(struct domain_device * dev)690 int pm8001_dev_found(struct domain_device *dev)
691 {
692 return pm8001_dev_found_notify(dev);
693 }
694
695 #define PM8001_TASK_TIMEOUT 20
696
697 /**
698 * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
699 * @dev: the device structure which sas layer used.
700 */
pm8001_dev_gone_notify(struct domain_device * dev)701 static void pm8001_dev_gone_notify(struct domain_device *dev)
702 {
703 unsigned long flags = 0;
704 struct pm8001_hba_info *pm8001_ha;
705 struct pm8001_device *pm8001_dev = dev->lldd_dev;
706
707 pm8001_ha = pm8001_find_ha_by_dev(dev);
708 spin_lock_irqsave(&pm8001_ha->lock, flags);
709 if (pm8001_dev) {
710 u32 device_id = pm8001_dev->device_id;
711
712 pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n",
713 pm8001_dev->device_id, pm8001_dev->dev_type);
714 if (atomic_read(&pm8001_dev->running_req)) {
715 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
716 sas_execute_internal_abort_dev(dev, 0, NULL);
717 while (atomic_read(&pm8001_dev->running_req))
718 msleep(20);
719 spin_lock_irqsave(&pm8001_ha->lock, flags);
720 }
721 PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
722 pm8001_free_dev(pm8001_dev);
723 } else {
724 pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
725 }
726 dev->lldd_dev = NULL;
727 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
728 }
729
pm8001_dev_gone(struct domain_device * dev)730 void pm8001_dev_gone(struct domain_device *dev)
731 {
732 pm8001_dev_gone_notify(dev);
733 }
734
735 /* retry commands by ha, by task and/or by device */
pm8001_open_reject_retry(struct pm8001_hba_info * pm8001_ha,struct sas_task * task_to_close,struct pm8001_device * device_to_close)736 void pm8001_open_reject_retry(
737 struct pm8001_hba_info *pm8001_ha,
738 struct sas_task *task_to_close,
739 struct pm8001_device *device_to_close)
740 {
741 int i;
742 unsigned long flags;
743
744 if (pm8001_ha == NULL)
745 return;
746
747 spin_lock_irqsave(&pm8001_ha->lock, flags);
748
749 for (i = 0; i < PM8001_MAX_CCB; i++) {
750 struct sas_task *task;
751 struct task_status_struct *ts;
752 struct pm8001_device *pm8001_dev;
753 unsigned long flags1;
754 struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
755
756 if (ccb->ccb_tag == PM8001_INVALID_TAG)
757 continue;
758
759 pm8001_dev = ccb->device;
760 if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
761 continue;
762 if (!device_to_close) {
763 uintptr_t d = (uintptr_t)pm8001_dev
764 - (uintptr_t)&pm8001_ha->devices;
765 if (((d % sizeof(*pm8001_dev)) != 0)
766 || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
767 continue;
768 } else if (pm8001_dev != device_to_close)
769 continue;
770 task = ccb->task;
771 if (!task || !task->task_done)
772 continue;
773 if (task_to_close && (task != task_to_close))
774 continue;
775 ts = &task->task_status;
776 ts->resp = SAS_TASK_COMPLETE;
777 /* Force the midlayer to retry */
778 ts->stat = SAS_OPEN_REJECT;
779 ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
780 if (pm8001_dev)
781 atomic_dec(&pm8001_dev->running_req);
782 spin_lock_irqsave(&task->task_state_lock, flags1);
783 task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
784 task->task_state_flags |= SAS_TASK_STATE_DONE;
785 if (unlikely((task->task_state_flags
786 & SAS_TASK_STATE_ABORTED))) {
787 spin_unlock_irqrestore(&task->task_state_lock,
788 flags1);
789 pm8001_ccb_task_free(pm8001_ha, ccb);
790 } else {
791 spin_unlock_irqrestore(&task->task_state_lock,
792 flags1);
793 pm8001_ccb_task_free(pm8001_ha, ccb);
794 mb();/* in order to force CPU ordering */
795 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
796 task->task_done(task);
797 spin_lock_irqsave(&pm8001_ha->lock, flags);
798 }
799 }
800
801 spin_unlock_irqrestore(&pm8001_ha->lock, flags);
802 }
803
804 /**
805 * pm8001_I_T_nexus_reset() - reset the initiator/target connection
806 * @dev: the device structure for the device to reset.
807 *
808 * Standard mandates link reset for ATA (type 0) and hard reset for
809 * SSP (type 1), only for RECOVERY
810 */
pm8001_I_T_nexus_reset(struct domain_device * dev)811 int pm8001_I_T_nexus_reset(struct domain_device *dev)
812 {
813 int rc = TMF_RESP_FUNC_FAILED;
814 struct pm8001_device *pm8001_dev;
815 struct pm8001_hba_info *pm8001_ha;
816 struct sas_phy *phy;
817
818 if (!dev || !dev->lldd_dev)
819 return -ENODEV;
820
821 pm8001_dev = dev->lldd_dev;
822 pm8001_ha = pm8001_find_ha_by_dev(dev);
823 phy = sas_get_local_phy(dev);
824
825 if (dev_is_sata(dev)) {
826 if (scsi_is_sas_phy_local(phy)) {
827 rc = 0;
828 goto out;
829 }
830 rc = sas_phy_reset(phy, 1);
831 if (rc) {
832 pm8001_dbg(pm8001_ha, EH,
833 "phy reset failed for device %x\n"
834 "with rc %d\n", pm8001_dev->device_id, rc);
835 rc = TMF_RESP_FUNC_FAILED;
836 goto out;
837 }
838 msleep(2000);
839 rc = sas_execute_internal_abort_dev(dev, 0, NULL);
840 if (rc) {
841 pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
842 "with rc %d\n", pm8001_dev->device_id, rc);
843 rc = TMF_RESP_FUNC_FAILED;
844 }
845 } else {
846 rc = sas_phy_reset(phy, 1);
847 msleep(2000);
848 }
849 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
850 pm8001_dev->device_id, rc);
851 out:
852 sas_put_local_phy(phy);
853 return rc;
854 }
855
856 /*
857 * This function handle the IT_NEXUS_XXX event or completion
858 * status code for SSP/SATA/SMP I/O request.
859 */
pm8001_I_T_nexus_event_handler(struct domain_device * dev)860 int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
861 {
862 int rc = TMF_RESP_FUNC_FAILED;
863 struct pm8001_device *pm8001_dev;
864 struct pm8001_hba_info *pm8001_ha;
865 struct sas_phy *phy;
866
867 if (!dev || !dev->lldd_dev)
868 return -1;
869
870 pm8001_dev = dev->lldd_dev;
871 pm8001_ha = pm8001_find_ha_by_dev(dev);
872
873 pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n");
874
875 phy = sas_get_local_phy(dev);
876
877 if (dev_is_sata(dev)) {
878 DECLARE_COMPLETION_ONSTACK(completion_setstate);
879 if (scsi_is_sas_phy_local(phy)) {
880 rc = 0;
881 goto out;
882 }
883 /* send internal ssp/sata/smp abort command to FW */
884 sas_execute_internal_abort_dev(dev, 0, NULL);
885 msleep(100);
886
887 /* deregister the target device */
888 pm8001_dev_gone_notify(dev);
889 msleep(200);
890
891 /*send phy reset to hard reset target */
892 rc = sas_phy_reset(phy, 1);
893 msleep(2000);
894 pm8001_dev->setds_completion = &completion_setstate;
895
896 wait_for_completion(&completion_setstate);
897 } else {
898 /* send internal ssp/sata/smp abort command to FW */
899 sas_execute_internal_abort_dev(dev, 0, NULL);
900 msleep(100);
901
902 /* deregister the target device */
903 pm8001_dev_gone_notify(dev);
904 msleep(200);
905
906 /*send phy reset to hard reset target */
907 rc = sas_phy_reset(phy, 1);
908 msleep(2000);
909 }
910 pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
911 pm8001_dev->device_id, rc);
912 out:
913 sas_put_local_phy(phy);
914
915 return rc;
916 }
917 /* mandatory SAM-3, the task reset the specified LUN*/
pm8001_lu_reset(struct domain_device * dev,u8 * lun)918 int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
919 {
920 int rc = TMF_RESP_FUNC_FAILED;
921 struct pm8001_device *pm8001_dev = dev->lldd_dev;
922 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
923 DECLARE_COMPLETION_ONSTACK(completion_setstate);
924
925 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
926 /*
927 * If the controller is in fatal error state,
928 * we will not get a response from the controller
929 */
930 pm8001_dbg(pm8001_ha, FAIL,
931 "LUN reset failed due to fatal errors\n");
932 return rc;
933 }
934
935 if (dev_is_sata(dev)) {
936 struct sas_phy *phy = sas_get_local_phy(dev);
937 sas_execute_internal_abort_dev(dev, 0, NULL);
938 rc = sas_phy_reset(phy, 1);
939 sas_put_local_phy(phy);
940 pm8001_dev->setds_completion = &completion_setstate;
941 rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
942 pm8001_dev, DS_OPERATIONAL);
943 wait_for_completion(&completion_setstate);
944 } else {
945 rc = sas_lu_reset(dev, lun);
946 }
947 /* If failed, fall-through I_T_Nexus reset */
948 pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n",
949 pm8001_dev->device_id, rc);
950 return rc;
951 }
952
953 /* optional SAM-3 */
pm8001_query_task(struct sas_task * task)954 int pm8001_query_task(struct sas_task *task)
955 {
956 u32 tag = 0xdeadbeef;
957 int rc = TMF_RESP_FUNC_FAILED;
958 if (unlikely(!task || !task->lldd_task || !task->dev))
959 return rc;
960
961 if (task->task_proto & SAS_PROTOCOL_SSP) {
962 struct scsi_cmnd *cmnd = task->uldd_task;
963 struct domain_device *dev = task->dev;
964 struct pm8001_hba_info *pm8001_ha =
965 pm8001_find_ha_by_dev(dev);
966
967 rc = pm8001_find_tag(task, &tag);
968 if (rc == 0) {
969 rc = TMF_RESP_FUNC_FAILED;
970 return rc;
971 }
972 pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd);
973
974 rc = sas_query_task(task, tag);
975 switch (rc) {
976 /* The task is still in Lun, release it then */
977 case TMF_RESP_FUNC_SUCC:
978 pm8001_dbg(pm8001_ha, EH,
979 "The task is still in Lun\n");
980 break;
981 /* The task is not in Lun or failed, reset the phy */
982 case TMF_RESP_FUNC_FAILED:
983 case TMF_RESP_FUNC_COMPLETE:
984 pm8001_dbg(pm8001_ha, EH,
985 "The task is not in Lun or failed, reset the phy\n");
986 break;
987 }
988 }
989 pr_err("pm80xx: rc= %d\n", rc);
990 return rc;
991 }
992
993 /* mandatory SAM-3, still need free task/ccb info, abort the specified task */
pm8001_abort_task(struct sas_task * task)994 int pm8001_abort_task(struct sas_task *task)
995 {
996 struct pm8001_ccb_info *ccb = task->lldd_task;
997 unsigned long flags;
998 u32 tag;
999 struct domain_device *dev ;
1000 struct pm8001_hba_info *pm8001_ha;
1001 struct pm8001_device *pm8001_dev;
1002 int rc = TMF_RESP_FUNC_FAILED, ret;
1003 u32 phy_id, port_id;
1004 struct sas_task_slow slow_task;
1005
1006 if (!task->lldd_task || !task->dev)
1007 return TMF_RESP_FUNC_FAILED;
1008
1009 dev = task->dev;
1010 pm8001_dev = dev->lldd_dev;
1011 pm8001_ha = pm8001_find_ha_by_dev(dev);
1012 phy_id = pm8001_dev->attached_phy;
1013
1014 if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
1015 // If the controller is seeing fatal errors
1016 // abort task will not get a response from the controller
1017 return TMF_RESP_FUNC_FAILED;
1018 }
1019
1020 ret = pm8001_find_tag(task, &tag);
1021 if (ret == 0) {
1022 pm8001_info(pm8001_ha, "no tag for task:%p\n", task);
1023 return TMF_RESP_FUNC_FAILED;
1024 }
1025 spin_lock_irqsave(&task->task_state_lock, flags);
1026 if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1027 spin_unlock_irqrestore(&task->task_state_lock, flags);
1028 return TMF_RESP_FUNC_COMPLETE;
1029 }
1030 task->task_state_flags |= SAS_TASK_STATE_ABORTED;
1031 if (task->slow_task == NULL) {
1032 init_completion(&slow_task.completion);
1033 task->slow_task = &slow_task;
1034 }
1035 spin_unlock_irqrestore(&task->task_state_lock, flags);
1036 if (task->task_proto & SAS_PROTOCOL_SSP) {
1037 rc = sas_abort_task(task, tag);
1038 sas_execute_internal_abort_single(dev, tag, 0, NULL);
1039 } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1040 task->task_proto & SAS_PROTOCOL_STP) {
1041 if (pm8001_ha->chip_id == chip_8006) {
1042 DECLARE_COMPLETION_ONSTACK(completion_reset);
1043 DECLARE_COMPLETION_ONSTACK(completion);
1044 struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
1045 port_id = phy->port->port_id;
1046
1047 /* 1. Set Device state as Recovery */
1048 pm8001_dev->setds_completion = &completion;
1049 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1050 pm8001_dev, DS_IN_RECOVERY);
1051 wait_for_completion(&completion);
1052
1053 /* 2. Send Phy Control Hard Reset */
1054 reinit_completion(&completion);
1055 phy->port_reset_status = PORT_RESET_TMO;
1056 phy->reset_success = false;
1057 phy->enable_completion = &completion;
1058 phy->reset_completion = &completion_reset;
1059 ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
1060 PHY_HARD_RESET);
1061 if (ret) {
1062 phy->enable_completion = NULL;
1063 phy->reset_completion = NULL;
1064 goto out;
1065 }
1066
1067 /* In the case of the reset timeout/fail we still
1068 * abort the command at the firmware. The assumption
1069 * here is that the drive is off doing something so
1070 * that it's not processing requests, and we want to
1071 * avoid getting a completion for this and either
1072 * leaking the task in libsas or losing the race and
1073 * getting a double free.
1074 */
1075 pm8001_dbg(pm8001_ha, MSG,
1076 "Waiting for local phy ctl\n");
1077 ret = wait_for_completion_timeout(&completion,
1078 PM8001_TASK_TIMEOUT * HZ);
1079 if (!ret || !phy->reset_success) {
1080 phy->enable_completion = NULL;
1081 phy->reset_completion = NULL;
1082 } else {
1083 /* 3. Wait for Port Reset complete or
1084 * Port reset TMO
1085 */
1086 pm8001_dbg(pm8001_ha, MSG,
1087 "Waiting for Port reset\n");
1088 ret = wait_for_completion_timeout(
1089 &completion_reset,
1090 PM8001_TASK_TIMEOUT * HZ);
1091 if (!ret)
1092 phy->reset_completion = NULL;
1093 WARN_ON(phy->port_reset_status ==
1094 PORT_RESET_TMO);
1095 if (phy->port_reset_status == PORT_RESET_TMO) {
1096 pm8001_dev_gone_notify(dev);
1097 PM8001_CHIP_DISP->hw_event_ack_req(
1098 pm8001_ha, 0,
1099 0x07, /*HW_EVENT_PHY_DOWN ack*/
1100 port_id, phy_id, 0, 0);
1101 goto out;
1102 }
1103 }
1104
1105 /*
1106 * 4. SATA Abort ALL
1107 * we wait for the task to be aborted so that the task
1108 * is removed from the ccb. on success the caller is
1109 * going to free the task.
1110 */
1111 ret = sas_execute_internal_abort_dev(dev, 0, NULL);
1112 if (ret)
1113 goto out;
1114 ret = wait_for_completion_timeout(
1115 &task->slow_task->completion,
1116 PM8001_TASK_TIMEOUT * HZ);
1117 if (!ret)
1118 goto out;
1119
1120 /* 5. Set Device State as Operational */
1121 reinit_completion(&completion);
1122 pm8001_dev->setds_completion = &completion;
1123 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1124 pm8001_dev, DS_OPERATIONAL);
1125 wait_for_completion(&completion);
1126 } else {
1127 /*
1128 * Ensure that if we see a completion for the ccb
1129 * associated with the task which we are trying to
1130 * abort then we should not touch the sas_task as it
1131 * may race with libsas freeing it when return here.
1132 */
1133 ccb->task = NULL;
1134 ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
1135 }
1136 rc = TMF_RESP_FUNC_COMPLETE;
1137 } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1138 /* SMP */
1139 rc = sas_execute_internal_abort_single(dev, tag, 0, NULL);
1140
1141 }
1142 out:
1143 spin_lock_irqsave(&task->task_state_lock, flags);
1144 if (task->slow_task == &slow_task)
1145 task->slow_task = NULL;
1146 spin_unlock_irqrestore(&task->task_state_lock, flags);
1147 if (rc != TMF_RESP_FUNC_COMPLETE)
1148 pm8001_info(pm8001_ha, "rc= %d\n", rc);
1149 return rc;
1150 }
1151
pm8001_clear_task_set(struct domain_device * dev,u8 * lun)1152 int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1153 {
1154 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1155 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1156
1157 pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n",
1158 pm8001_dev->device_id);
1159 return sas_clear_task_set(dev, lun);
1160 }
1161
pm8001_port_formed(struct asd_sas_phy * sas_phy)1162 void pm8001_port_formed(struct asd_sas_phy *sas_phy)
1163 {
1164 struct sas_ha_struct *sas_ha = sas_phy->ha;
1165 struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha;
1166 struct pm8001_phy *phy = sas_phy->lldd_phy;
1167 struct asd_sas_port *sas_port = sas_phy->port;
1168 struct pm8001_port *port = phy->port;
1169
1170 if (!sas_port) {
1171 pm8001_dbg(pm8001_ha, FAIL, "Received null port\n");
1172 return;
1173 }
1174 sas_port->lldd_port = port;
1175 }
1176
pm8001_setds_completion(struct domain_device * dev)1177 void pm8001_setds_completion(struct domain_device *dev)
1178 {
1179 struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1180 struct pm8001_device *pm8001_dev = dev->lldd_dev;
1181 DECLARE_COMPLETION_ONSTACK(completion_setstate);
1182
1183 if (pm8001_ha->chip_id != chip_8001) {
1184 pm8001_dev->setds_completion = &completion_setstate;
1185 PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
1186 pm8001_dev, DS_OPERATIONAL);
1187 wait_for_completion(&completion_setstate);
1188 }
1189 }
1190
pm8001_tmf_aborted(struct sas_task * task)1191 void pm8001_tmf_aborted(struct sas_task *task)
1192 {
1193 struct pm8001_ccb_info *ccb = task->lldd_task;
1194
1195 if (ccb)
1196 ccb->task = NULL;
1197 }
1198