xref: /titanic_41/usr/src/cmd/cmd-inet/usr.lib/bridged/dlpi.c (revision 4eaa471005973e11a6110b69fe990530b3b95a38)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 /*
28  * bridged - bridging control daemon.  This module provides DLPI-specific
29  * functions for interface to libdlpi.
30  */
31 
32 #include <stdio.h>
33 #include <stdlib.h>
34 #include <unistd.h>
35 #include <string.h>
36 #include <sys/types.h>
37 #include <syslog.h>
38 #include <stropts.h>
39 #include <stp_in.h>
40 #include <net/if_types.h>
41 #include <net/if_dl.h>
42 #include <sys/ethernet.h>
43 #include <sys/pfmod.h>
44 
45 #include "global.h"
46 
47 static const uchar_t bridge_group_address[] = BRIDGE_GROUP_ADDRESS;
48 
49 static const ushort_t bpdu_filter[] = {
50 	ENF_PUSHWORD | 0,		/* check for 1:80:c2:0:0:0 dest. */
51 	ENF_PUSHLIT | ENF_CAND,
52 #ifdef _BIG_ENDIAN
53 	0x0180,
54 #else
55 	0x8001,
56 #endif
57 	ENF_PUSHWORD | 1,
58 	ENF_PUSHLIT | ENF_CAND,
59 #ifdef _BIG_ENDIAN
60 	0xC200,
61 #else
62 	0x00C2,
63 #endif
64 	ENF_PUSHWORD | 2,
65 	ENF_PUSHZERO | ENF_CAND,
66 	ENF_PUSHWORD | 7,		/* check for SSAP/DSAP 42 42 */
67 	ENF_PUSHLIT | ENF_CAND,
68 	0x4242,
69 };
70 
71 /*
72  * Because we're called by dlpi_recv(), we're called with the engine lock held.
73  */
74 /*ARGSUSED*/
75 static void
dlpi_notify(dlpi_handle_t dlpi,dlpi_notifyinfo_t * info,void * arg)76 dlpi_notify(dlpi_handle_t dlpi, dlpi_notifyinfo_t *info, void *arg)
77 {
78 	struct portdata *port = arg;
79 	int rc;
80 
81 	switch (info->dni_note) {
82 	case DL_NOTE_SPEED:
83 		/* libdlpi gives us Kbps, and we want Mbps */
84 		if (port->speed == info->dni_speed / 1000)
85 			break;
86 		port->speed = info->dni_speed / 1000;
87 		if ((rc = STP_IN_changed_port_speed(port->port_index,
88 		    port->speed)) != 0)
89 			syslog(LOG_ERR, "STP can't change port speed on %s: %s",
90 			    port->name, STP_IN_get_error_explanation(rc));
91 		break;
92 
93 	case DL_NOTE_PHYS_ADDR:
94 		if (memcmp(info->dni_physaddr, port->mac_addr, ETHERADDRL) != 0)
95 			rstp_change_mac(port, info->dni_physaddr);
96 		break;
97 
98 	case DL_NOTE_LINK_DOWN:
99 		if (!port->phys_status)
100 			break;
101 		port->phys_status = B_FALSE;
102 		if (!port->admin_status || protect != DLADM_BRIDGE_PROT_STP ||
103 		    port->sdu_failed)
104 			break;
105 		if ((rc = STP_IN_enable_port(port->port_index, False)) != 0)
106 			syslog(LOG_ERR, "STP can't disable port %s: %s",
107 			    port->name, STP_IN_get_error_explanation(rc));
108 		break;
109 
110 	case DL_NOTE_LINK_UP:
111 		if (port->phys_status)
112 			break;
113 		port->phys_status = B_TRUE;
114 		if (!port->admin_status || protect != DLADM_BRIDGE_PROT_STP ||
115 		    port->sdu_failed) {
116 			port->bpdu_protect = B_FALSE;
117 			break;
118 		}
119 		/*
120 		 * If we're not running STP, and the link state has just come
121 		 * up, then clear out any protection shutdown state, and allow
122 		 * us to forward again.
123 		 */
124 		if (port->admin_non_stp && port->bpdu_protect) {
125 			port->bpdu_protect = B_FALSE;
126 			enable_forwarding(port);
127 		}
128 		if ((rc = STP_IN_enable_port(port->port_index, True)) != 0)
129 			syslog(LOG_ERR, "STP can't enable port %s: %s",
130 			    port->name, STP_IN_get_error_explanation(rc));
131 		break;
132 	}
133 }
134 
135 boolean_t
port_dlpi_open(const char * portname,struct portdata * port,datalink_class_t class)136 port_dlpi_open(const char *portname, struct portdata *port,
137     datalink_class_t class)
138 {
139 	uchar_t addrbuf[DLPI_PHYSADDR_MAX];
140 	size_t alen = DLPI_PHYSADDR_MAX;
141 	int rc;
142 	char addrstr[ETHERADDRL * 3];
143 
144 	/*
145 	 * We use DLPI 'raw' mode so that we get access to the received
146 	 * Ethernet 802 length field.  libdlpi otherwise eats this value.  Note
147 	 * that 'raw' mode support is required in order to use snoop, so it's
148 	 * expected to be common, even if it's not documented.
149 	 */
150 	rc = dlpi_open(portname, &port->dlpi, DLPI_RAW);
151 	if (rc != DLPI_SUCCESS) {
152 		syslog(LOG_ERR, "can't open %s: %s", portname,
153 		    dlpi_strerror(rc));
154 		return (B_FALSE);
155 	}
156 
157 	port->phys_status = B_TRUE;
158 	port->sdu_failed = B_FALSE;
159 	port->bpdu_protect = B_FALSE;
160 
161 	/*
162 	 * Now that the driver is open, we can get at least the initial value
163 	 * of the interface speed.  We need to do this before establishing the
164 	 * notify callback, so that it can update us later.
165 	 */
166 	get_dladm_speed(port);
167 
168 	/*
169 	 * Save off the libdlpi port name, as it's dynamically allocated, and
170 	 * the name we're passed is not.
171 	 */
172 	port->name = dlpi_linkname(port->dlpi);
173 
174 	/*
175 	 * We can't bind SAP 0 or enable multicast on an etherstub.  It's ok,
176 	 * though, because there's no real hardware involved.
177 	 */
178 	if (class != DATALINK_CLASS_ETHERSTUB) {
179 		if ((rc = dlpi_bind(port->dlpi, 0, NULL)) != DLPI_SUCCESS) {
180 			syslog(LOG_ERR, "can't bind %s: %s", portname,
181 			    dlpi_strerror(rc));
182 			return (B_FALSE);
183 		}
184 		if ((rc = dlpi_enabmulti(port->dlpi, bridge_group_address,
185 		    sizeof (bridge_group_address))) != DLPI_SUCCESS) {
186 			syslog(LOG_ERR, "can't enable multicast on %s: %s",
187 			    portname, dlpi_strerror(rc));
188 			return (B_FALSE);
189 		}
190 	}
191 
192 	if ((rc = dlpi_enabnotify(port->dlpi,
193 	    DL_NOTE_PHYS_ADDR | DL_NOTE_LINK_DOWN | DL_NOTE_LINK_UP |
194 	    DL_NOTE_SPEED, dlpi_notify, port, &port->notifyid)) !=
195 	    DLPI_SUCCESS) {
196 		syslog(LOG_WARNING, "no DLPI notification on %s: %s", portname,
197 		    dlpi_strerror(rc));
198 	}
199 
200 	rc = dlpi_get_physaddr(port->dlpi, DL_CURR_PHYS_ADDR, addrbuf, &alen);
201 	if (rc != DLPI_SUCCESS) {
202 		syslog(LOG_ERR, "unable to get MAC address on %s: %s",
203 		    port->name, dlpi_strerror(rc));
204 		return (B_FALSE);
205 	}
206 	if (alen != ETHERADDRL) {
207 		syslog(LOG_ERR, "bad MAC address length %d on %s",
208 		    alen, port->name);
209 		return (B_FALSE);
210 	}
211 	(void) memcpy(port->mac_addr, addrbuf, ETHERADDRL);
212 
213 	if (class != DATALINK_CLASS_ETHERSTUB) {
214 		int fd = dlpi_fd(port->dlpi);
215 		int lowflag = 1;
216 
217 		if (strioctl(fd, DLIOCLOWLINK, &lowflag, sizeof (lowflag)) != 0)
218 			syslog(LOG_WARNING, "low-link notify failed on %s: %m",
219 			    portname);
220 		if (ioctl(fd, I_PUSH, "pfmod") == 0) {
221 			struct packetfilt pf;
222 
223 			pf.Pf_Priority = 0;
224 			pf.Pf_FilterLen = sizeof (bpdu_filter) /
225 			    sizeof (*bpdu_filter);
226 			(void) memcpy(pf.Pf_Filter, bpdu_filter,
227 			    sizeof (bpdu_filter));
228 			if (strioctl(fd, PFIOCSETF, &pf, sizeof (pf)) == -1)
229 				syslog(LOG_WARNING,
230 				    "pfil ioctl failed on %s: %m", portname);
231 		} else {
232 			syslog(LOG_WARNING, "pfil push failed on %s: %m",
233 			    portname);
234 		}
235 	}
236 
237 	if (debugging) {
238 		(void) _link_ntoa(port->mac_addr, addrstr, ETHERADDRL,
239 		    IFT_OTHER);
240 		syslog(LOG_DEBUG, "got MAC address %s on %s", addrstr,
241 		    port->name);
242 	}
243 
244 	return (B_TRUE);
245 }
246