xref: /titanic_52/usr/src/uts/common/io/l_strplumb.c (revision da6c28aaf62fa55f0fdb8004aa40f88f23bf53f0)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #pragma ident	"%Z%%M%	%I%	%E% SMI"
27 
28 #include	<sys/param.h>
29 #include	<sys/types.h>
30 #include	<sys/user.h>
31 #include	<sys/vfs.h>
32 #include	<sys/vnode.h>
33 #include	<sys/file.h>
34 #include	<sys/stream.h>
35 #include	<sys/stropts.h>
36 #include	<sys/strsubr.h>
37 #include	<sys/dlpi.h>
38 #include	<sys/vnode.h>
39 #include	<sys/socket.h>
40 #include	<sys/sockio.h>
41 #include	<sys/cmn_err.h>
42 #include	<net/if.h>
43 #include	<sys/sad.h>
44 #include	<sys/kstr.h>
45 #include	<sys/ddi.h>
46 #include	<sys/sunddi.h>
47 #include	<sys/sunldi.h>
48 
49 #include	<sys/cred.h>
50 #include	<sys/sysmacros.h>
51 
52 #include	<sys/modctl.h>
53 
54 /*
55  * Routines to allow strplumb() legitimate access
56  * to the kernel.
57  */
58 int
59 kstr_open(major_t maj, minor_t min, vnode_t **vpp, int *fd)
60 {
61 	vnode_t		*vp;
62 	int		error;
63 
64 	vp = makespecvp(makedevice(maj, min), VCHR);
65 
66 	/*
67 	 * Fix for 4170365: only allocate file descriptor entry
68 	 * if file descriptor is to be returned; otherwise VOP_OPEN.
69 	 */
70 	if (fd != NULL)
71 		error = fassign(&vp, FREAD|FWRITE, fd);
72 	else
73 		error = VOP_OPEN(&vp, FREAD|FWRITE, CRED(), NULL);
74 
75 	/*
76 	 * Must set vpp after calling fassign()/VOP_OPEN()
77 	 * since `vp' might change if it's a clone driver.
78 	 */
79 	if (vpp != NULL)
80 		*vpp = vp;
81 
82 	return (error);
83 }
84 
85 int
86 kstr_plink(vnode_t *vp, int fd, int *mux_id)
87 {
88 	int	id;
89 	int	error;
90 
91 	if (error = strioctl(vp, I_PLINK, (intptr_t)fd, 0, K_TO_K, CRED(), &id))
92 		return (error);
93 	if (mux_id)
94 		*mux_id = id;
95 	return (0);
96 }
97 
98 int
99 kstr_unplink(vnode_t *vp, int mux_id)
100 {
101 	int	rval;
102 
103 	return (strioctl(vp, I_PUNLINK, (intptr_t)mux_id, 0,
104 	    K_TO_K, CRED(), &rval));
105 }
106 
107 int
108 kstr_push(vnode_t *vp, char *mod)
109 {
110 	int	rval;
111 
112 	return (strioctl(vp, I_PUSH, (intptr_t)mod, 0, K_TO_K, CRED(), &rval));
113 }
114 
115 int
116 kstr_pop(vnode_t *vp)
117 {
118 	int	rval;
119 
120 	return (strioctl(vp, I_POP, 0, 0, K_TO_K, CRED(), &rval));
121 }
122 
123 int
124 kstr_close(vnode_t *vp, int fd)
125 {
126 	int ret;
127 
128 	if (vp == (vnode_t *)NULL && fd == -1)
129 		return (EINVAL);
130 
131 	if (fd != -1) {
132 		if (closeandsetf(fd, NULL) == 0) {
133 			return (0);
134 		} else {
135 			return (EINVAL);
136 		}
137 	} else {
138 		ret = VOP_CLOSE(vp, FREAD|FWRITE, 1, (offset_t)0, CRED(), NULL);
139 		VN_RELE(vp);
140 		return (ret);
141 	}
142 }
143 
144 int
145 kstr_ioctl(struct vnode *vp, int cmd, intptr_t arg)
146 {
147 	int	rval;
148 
149 	return (strioctl(vp, cmd, arg, 0, K_TO_K, CRED(), &rval));
150 }
151 
152 /*
153  * Optionally send data (if smp set) and optionally receive data (if rmp is
154  * set). If timeo is NULL the reception will sleep until a message is
155  * received; otherwise the sleep is limited to the specified amount of time.
156  */
157 int
158 kstr_msg(vnode_t *vp, mblk_t *smp, mblk_t **rmp, timestruc_t *timeo)
159 {
160 	int			error;
161 	clock_t			timout;	/* milliseconds */
162 	uchar_t 		pri;
163 	int 			pflag;
164 	rval_t			rval;
165 
166 	if (rmp == NULL && timeo != NULL &&
167 	    (timeo->tv_sec != 0 || timeo->tv_nsec != 0))
168 		return (EINVAL);
169 
170 	if (smp == NULL && rmp == NULL)
171 		return (EINVAL);
172 
173 	if (smp != NULL) {
174 		/* Send message while honoring flow control */
175 		(void) kstrputmsg(vp, smp, NULL, 0, 0,
176 		    MSG_BAND | MSG_HOLDSIG | MSG_IGNERROR, 0);
177 	}
178 
179 	if (rmp == NULL) {
180 		/* No reply wanted by caller */
181 		return (0);
182 	}
183 
184 	/*
185 	 * Convert from nanoseconds to milliseconds.
186 	 */
187 	if (timeo != NULL) {
188 		timout = timeo->tv_sec * 1000 + timeo->tv_nsec / 1000000;
189 		if (timout > INT_MAX)
190 			return (EINVAL);
191 	} else
192 		timout = -1;
193 
194 	/* Wait for timeout millseconds for a message */
195 	pflag = MSG_ANY;
196 	pri = 0;
197 	*rmp = NULL;
198 	error = kstrgetmsg(vp, rmp, NULL, &pri, &pflag, timout, &rval);
199 	/* Callers use *rmp == NULL to determine that there was a timeout */
200 	if (error == ETIME)
201 		error = 0;
202 	return (error);
203 }
204 
205 #define	SAD_ADM	"/devices/pseudo/sad@0:admin"
206 #define	SAD_USR	"/devices/pseudo/sad@0:user"
207 
208 /*
209  * It is the callers responsibility to make sure that "mods"
210  * conforms to what is required. We do not check it here.
211  *
212  * "maj", "min", and "lastmin" are value-result parameters.
213  * for SET_AUTOPUSH, "anchor" should be set to the place in the stream
214  *	to put the anchor, or NULL if no anchor needs to be set.
215  * for GET_AUTOPUSH, "anchor" should point to a uint_t to store the
216  *	position of the anchor at, or NULL if the caller is not interested.
217  */
218 int
219 kstr_autopush(int op, major_t *maj, minor_t *min, minor_t *lastmin,
220     uint_t *anchor, char *mods[])
221 {
222 	ldi_handle_t	lh;
223 	ldi_ident_t	li;
224 	struct strapush	push;
225 	int		i, error, rval;
226 
227 	li = ldi_ident_from_anon();
228 	if (op == SET_AUTOPUSH || op == CLR_AUTOPUSH) {
229 		error = ldi_open_by_name(SAD_ADM, FREAD|FWRITE,
230 		    kcred, &lh, li);
231 		if (error) {
232 			printf("kstr_autopush: open failed error %d\n", error);
233 			ldi_ident_release(li);
234 			return (error);
235 		}
236 	} else	{
237 		error = ldi_open_by_name(SAD_USR, FREAD|FWRITE,
238 		    kcred, &lh, li);
239 		if (error) {
240 			printf("kstr_autopush: open failed error %d\n", error);
241 			ldi_ident_release(li);
242 			return (error);
243 		}
244 	}
245 	ldi_ident_release(li);
246 
247 	switch (op) {
248 	case GET_AUTOPUSH:
249 		/* Get autopush information */
250 
251 		push.sap_major = *maj;
252 		push.sap_minor = *min;
253 
254 		error = ldi_ioctl(lh, SAD_GAP, (intptr_t)&push,
255 		    FKIOCTL, kcred, &rval);
256 		if (error) {
257 			printf("kstr_autopush: "
258 			    "ioctl(GET_AUTOPUSH) failed, error %d\n", error);
259 			(void) ldi_close(lh, FREAD|FWRITE, kcred);
260 			return (error);
261 		}
262 		switch (push.sap_cmd) {
263 		case SAP_ONE:
264 			*maj = push.sap_major;
265 			*min = push.sap_minor;
266 			*lastmin = 0;
267 			break;
268 
269 		case SAP_RANGE:
270 			*maj = push.sap_major;
271 			*min = push.sap_minor;
272 			*lastmin = push.sap_lastminor;
273 			break;
274 
275 		case SAP_ALL:
276 			*maj = push.sap_major;
277 			*min = (minor_t)-1;
278 			break;
279 		}
280 
281 		if (anchor != NULL)
282 			*anchor = push.sap_anchor;
283 
284 		if (push.sap_npush > 1) {
285 			for (i = 0; i < push.sap_npush &&
286 			    mods[i] != NULL; i++)
287 				(void) strcpy(mods[i], push.sap_list[i]);
288 			mods[i] = NULL;
289 		}
290 		(void) ldi_close(lh, FREAD|FWRITE, kcred);
291 		return (0);
292 
293 	case CLR_AUTOPUSH:
294 		/* Remove autopush information */
295 
296 		push.sap_cmd = SAP_CLEAR;
297 		push.sap_minor = *min;
298 		push.sap_major = *maj;
299 
300 		error = ldi_ioctl(lh, SAD_SAP, (intptr_t)&push,
301 		    FKIOCTL, kcred, &rval);
302 		if (error) {
303 			printf("kstr_autopush: "
304 			    "ioctl(CLR_AUTOPUSH) failed, error %d\n", error);
305 		}
306 		(void) ldi_close(lh, FREAD|FWRITE, kcred);
307 		return (error);
308 
309 	case SET_AUTOPUSH:
310 		/* Set autopush information */
311 
312 		if (*min == (minor_t)-1) {
313 			push.sap_cmd = SAP_ALL;
314 		} else if (*lastmin == 0) {
315 			push.sap_cmd = SAP_ONE;
316 		} else	{
317 			push.sap_cmd = SAP_RANGE;
318 		}
319 
320 		if (anchor != NULL)
321 			push.sap_anchor = *anchor;
322 		else
323 			push.sap_anchor = 0;
324 
325 		push.sap_minor = *min;
326 		push.sap_major = *maj;
327 		if (lastmin)
328 			push.sap_lastminor = *lastmin;
329 		else
330 			push.sap_lastminor = 0;
331 
332 		/* pain */
333 		for (i = 0; i < MAXAPUSH && mods[i] != (char *)NULL; i++) {
334 			(void) strcpy(push.sap_list[i], mods[i]);
335 		}
336 		push.sap_npush = i;
337 		push.sap_list[i][0] = '\0';
338 
339 		error = ldi_ioctl(lh, SAD_SAP, (intptr_t)&push,
340 		    FKIOCTL, kcred, &rval);
341 		if (error) {
342 			printf("kstr_autopush: "
343 			    "ioctl(SET_AUTOPUSH) failed, error %d\n", error);
344 		}
345 		(void) ldi_close(lh, FREAD|FWRITE, kcred);
346 		return (error);
347 
348 	default:
349 		(void) ldi_close(lh, FREAD|FWRITE, kcred);
350 		return (EINVAL);
351 	}
352 }
353