1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License, Version 1.0 only
6 * (the "License"). You may not use this file except in compliance
7 * with the License.
8 *
9 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 * or http://www.opensolaris.org/os/licensing.
11 * See the License for the specific language governing permissions
12 * and limitations under the License.
13 *
14 * When distributing Covered Code, include this CDDL HEADER in each
15 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 * If applicable, add the following below this CDDL HEADER, with the
17 * fields enclosed by brackets "[]" replaced with your own identifying
18 * information: Portions Copyright [yyyy] [name of copyright owner]
19 *
20 * CDDL HEADER END
21 */
22 /*
23 * Copyright 2005 Sun Microsystems, Inc. All rights reserved.
24 * Use is subject to license terms.
25 */
26
27 #pragma ident "%Z%%M% %I% %E% SMI"
28
29 /*
30 * The DPI, or debugger/PROM interface, is used to isolate the debugger from the
31 * means by which we use the PROM to control the machine.
32 */
33
34 #include <sys/types.h>
35 #include <setjmp.h>
36
37 #include <kmdb/kmdb_dpi_impl.h>
38 #include <kmdb/kmdb_kdi.h>
39 #include <kmdb/kmdb_auxv.h>
40 #include <kmdb/kmdb_wr_impl.h>
41 #include <kmdb/kmdb_module.h>
42 #include <kmdb/kmdb_start.h>
43 #include <kmdb/kmdb_asmutil.h>
44 #include <mdb/mdb_debug.h>
45 #include <mdb/mdb_err.h>
46 #include <mdb/mdb_string.h>
47 #include <mdb/mdb.h>
48
49 jmp_buf *kmdb_dpi_fault_pcb;
50 jmp_buf kmdb_dpi_resume_pcb;
51 jmp_buf kmdb_dpi_entry_pcb;
52
53 static int kmdb_dpi_state;
54 static int kmdb_dpi_state_why;
55
56 uint_t kmdb_dpi_resume_requested;
57 uint_t kmdb_dpi_switch_target = (uint_t)-1;
58
59 /* Used by the style-specific resume interfaces to signal the driver */
60 void (*kmdb_dpi_wrintr_fire)(void);
61
62 int
kmdb_dpi_init(kmdb_auxv_t * kav)63 kmdb_dpi_init(kmdb_auxv_t *kav)
64 {
65 kmdb_dpi_state = DPI_STATE_INIT;
66 kmdb_dpi_resume_requested = 0;
67 kmdb_dpi_wrintr_fire = kav->kav_wrintr_fire;
68
69 mdb.m_dpi = &kmdb_dpi_ops;
70 return (mdb.m_dpi->dpo_init(kav));
71 }
72
73 /*ARGSUSED1*/
74 void
kmdb_activate(kdi_debugvec_t ** dvecp,uint_t flags)75 kmdb_activate(kdi_debugvec_t **dvecp, uint_t flags)
76 {
77 mdb.m_dpi->dpo_debugger_activate(dvecp, flags);
78 }
79
80 void
kmdb_deactivate(void)81 kmdb_deactivate(void)
82 {
83 mdb.m_dpi->dpo_debugger_deactivate();
84 }
85
86 int
kmdb_dpi_reenter(void)87 kmdb_dpi_reenter(void)
88 {
89 int cmd;
90
91 kmdb_kdi_system_claim();
92
93 if ((cmd = setjmp(kmdb_dpi_entry_pcb)) == 0) {
94 /* Direct entry from the driver */
95 if (kmdb_dpi_resume_requested)
96 longjmp(kmdb_dpi_resume_pcb, 1);
97
98 kmdb_first_start();
99
100 fail("kmdb_first_start returned");
101 /*NOTREACHED*/
102 }
103
104 mdb_dprintf(MDB_DBG_DPI, "returning to driver - cmd %d%s\n", cmd,
105 (kmdb_dpi_work_required() ? " (work required)" : ""));
106
107 kmdb_kdi_system_release();
108
109 membar_producer();
110
111 /*
112 * The debugger wants us to do something - it returned a command
113 * via the setjmp(). The driver will know what to do with the
114 * command.
115 */
116 return (cmd);
117 }
118
119 void
kmdb_dpi_enter_mon(void)120 kmdb_dpi_enter_mon(void)
121 {
122 mdb.m_dpi->dpo_enter_mon();
123 }
124
125 void
kmdb_dpi_modchg_register(void (* func)(struct modctl *,int))126 kmdb_dpi_modchg_register(void (*func)(struct modctl *, int))
127 {
128 mdb.m_dpi->dpo_modchg_register(func);
129 }
130
131 void
kmdb_dpi_modchg_cancel(void)132 kmdb_dpi_modchg_cancel(void)
133 {
134 mdb.m_dpi->dpo_modchg_cancel();
135 }
136
137 int
kmdb_dpi_get_cpu_state(int cpuid)138 kmdb_dpi_get_cpu_state(int cpuid)
139 {
140 return (mdb.m_dpi->dpo_get_cpu_state(cpuid));
141 }
142
143 int
kmdb_dpi_get_master_cpuid(void)144 kmdb_dpi_get_master_cpuid(void)
145 {
146 return (mdb.m_dpi->dpo_get_master_cpuid());
147 }
148
149 const mdb_tgt_gregset_t *
kmdb_dpi_get_gregs(int cpuid)150 kmdb_dpi_get_gregs(int cpuid)
151 {
152 return (mdb.m_dpi->dpo_get_gregs(cpuid));
153 }
154
155 jmp_buf *
kmdb_dpi_set_fault_hdlr(jmp_buf * jb)156 kmdb_dpi_set_fault_hdlr(jmp_buf *jb)
157 {
158 jmp_buf *oldpcb = kmdb_dpi_fault_pcb;
159
160 kmdb_dpi_fault_pcb = jb;
161
162 return (oldpcb);
163 }
164
165 void
kmdb_dpi_restore_fault_hdlr(jmp_buf * jb)166 kmdb_dpi_restore_fault_hdlr(jmp_buf *jb)
167 {
168 (void) kmdb_dpi_set_fault_hdlr(jb);
169 }
170
171 /*
172 * Used to tell the driver that it needs to do work after the resume.
173 *
174 * CAUTION: This routine may be called *after* mdb_destroy
175 */
176 int
kmdb_dpi_work_required(void)177 kmdb_dpi_work_required(void)
178 {
179 return (kmdb_kdi_get_unload_request() ||
180 !kmdb_wr_driver_notify_isempty());
181 }
182
183 void
kmdb_dpi_resume_master(void)184 kmdb_dpi_resume_master(void)
185 {
186 kmdb_dpi_resume_common(KMDB_DPI_CMD_RESUME_MASTER);
187 }
188
189 void
kmdb_dpi_resume(void)190 kmdb_dpi_resume(void)
191 {
192 kmdb_dpi_resume_common(KMDB_DPI_CMD_RESUME_ALL);
193 }
194
195 void
kmdb_dpi_resume_unload(void)196 kmdb_dpi_resume_unload(void)
197 {
198 kmdb_dpi_resume_common(KMDB_DPI_CMD_RESUME_UNLOAD);
199 }
200
201 int
kmdb_dpi_switch_master(int tgt_cpuid)202 kmdb_dpi_switch_master(int tgt_cpuid)
203 {
204 if (kmdb_dpi_get_cpu_state(tgt_cpuid) < 0)
205 return (-1); /* errno is set for us */
206
207 kmdb_dpi_switch_target = tgt_cpuid;
208 kmdb_dpi_resume_common(KMDB_DPI_CMD_SWITCH_CPU);
209
210 return (0);
211 }
212
213 void
kmdb_dpi_flush_slave_caches(void)214 kmdb_dpi_flush_slave_caches(void)
215 {
216 kmdb_dpi_resume_common(KMDB_DPI_CMD_FLUSH_CACHES);
217 }
218
219 typedef struct work_results {
220 mdb_nv_t res_loads;
221 mdb_nv_t res_unloads;
222 } work_results_t;
223
224 static int
kmdb_dbgnotify_cb(kmdb_wr_t * wn,void * arg)225 kmdb_dbgnotify_cb(kmdb_wr_t *wn, void *arg)
226 {
227 work_results_t *res = arg;
228
229 switch (WR_TASK(wn)) {
230 case WNTASK_DMOD_LOAD: {
231 /*
232 * If this is an ack, the driver finished processing a load we
233 * requested. We process it and free the message. If this
234 * isn't an ack, then it's a driver-initiated load. We process
235 * the message, and send it back as an ack so the driver can
236 * free it.
237 */
238 kmdb_wr_load_t *dlr = (kmdb_wr_load_t *)wn;
239
240 mdb_dprintf(MDB_DBG_DPI, "received module load message\n");
241
242 if (kmdb_module_loaded(dlr) && res != NULL) {
243 (void) mdb_nv_insert(&res->res_loads,
244 strbasename(dlr->dlr_fname), NULL, 0, 0);
245 }
246
247 if (WR_ISACK(dlr)) {
248 kmdb_module_load_ack(dlr);
249 return (0);
250 }
251
252 /* Send it back as an ack */
253 mdb_dprintf(MDB_DBG_DPI, "Sending load request for %s back "
254 "as an ack\n", dlr->dlr_fname);
255 WR_ACK(wn);
256 kmdb_wr_driver_notify(wn);
257 return (0);
258 }
259
260 case WNTASK_DMOD_LOAD_ALL:
261 /*
262 * We initiated the load-all, so this must be an ack. The
263 * individual module load messages will arrive separately -
264 * there's no need to do anything further with this message.
265 */
266 ASSERT(WR_ISACK(wn));
267
268 mdb_dprintf(MDB_DBG_DPI, "received module load all ack\n");
269
270 kmdb_module_load_all_ack(wn);
271 return (0);
272
273 case WNTASK_DMOD_UNLOAD: {
274 /*
275 * The debugger received an unload message. The driver isn't
276 * supposed to initiate unloads, so we shouldn't see anything
277 * but acks. We tell the dmod subsystem that the module has
278 * been unloaded, and we free the message.
279 */
280 kmdb_wr_unload_t *dur = (kmdb_wr_unload_t *)wn;
281
282 ASSERT(WR_ISACK(dur));
283
284 mdb_dprintf(MDB_DBG_DPI, "received module unload ack\n");
285
286 if (kmdb_module_unloaded(dur) && res != NULL) {
287 (void) mdb_nv_insert(&res->res_unloads,
288 dur->dur_modname, NULL, 0, 0);
289 }
290
291 /* Done with message */
292 kmdb_module_unload_ack(dur);
293 return (0);
294 }
295
296 case WNTASK_DMOD_PATH_CHANGE: {
297 /*
298 * The debugger received a path change message. The driver
299 * can't initiate these, so it must be an acknowledgement.
300 * There's no processing to be done, so just free the message.
301 */
302 kmdb_wr_path_t *dpth = (kmdb_wr_path_t *)wn;
303
304 ASSERT(WR_ISACK(dpth));
305
306 mdb_dprintf(MDB_DBG_DPI, "received path change ack\n");
307
308 kmdb_module_path_ack(dpth);
309 return (0);
310 }
311
312 default:
313 mdb_warn("Received unknown message type %d from driver\n",
314 wn->wn_task);
315 /* Ignore it */
316 return (0);
317 }
318 }
319
320 static void
print_modules(mdb_nv_t * mods)321 print_modules(mdb_nv_t *mods)
322 {
323 mdb_var_t *v;
324
325 mdb_nv_rewind(mods);
326 while ((v = mdb_nv_advance(mods)) != NULL)
327 mdb_printf(" %s", mdb_nv_get_name(v));
328 }
329
330 void
kmdb_dpi_process_work_queue(void)331 kmdb_dpi_process_work_queue(void)
332 {
333 work_results_t res;
334
335 (void) mdb_nv_create(&res.res_loads, UM_SLEEP);
336 (void) mdb_nv_create(&res.res_unloads, UM_SLEEP);
337
338 mdb_dprintf(MDB_DBG_DPI, "processing work queue\n");
339 (void) kmdb_wr_debugger_process(kmdb_dbgnotify_cb, &res);
340
341 if (mdb_nv_size(&res.res_loads)) {
342 mdb_printf("Loaded modules: [");
343 print_modules(&res.res_loads);
344 mdb_printf(" ]\n");
345 }
346
347 if (mdb_nv_size(&res.res_unloads)) {
348 mdb_printf("Unloaded modules: [");
349 print_modules(&res.res_unloads);
350 mdb_printf(" ]\n");
351 }
352
353 mdb_nv_destroy(&res.res_loads);
354 mdb_nv_destroy(&res.res_unloads);
355 }
356
357 int
kmdb_dpi_step(void)358 kmdb_dpi_step(void)
359 {
360 return (mdb.m_dpi->dpo_step());
361 }
362
363 uintptr_t
kmdb_dpi_call(uintptr_t func,uint_t argc,const uintptr_t * argv)364 kmdb_dpi_call(uintptr_t func, uint_t argc, const uintptr_t *argv)
365 {
366 return (mdb.m_dpi->dpo_call(func, argc, argv));
367 }
368
369 int
kmdb_dpi_brkpt_arm(uintptr_t addr,mdb_instr_t * instrp)370 kmdb_dpi_brkpt_arm(uintptr_t addr, mdb_instr_t *instrp)
371 {
372 int rc;
373
374 if ((rc = mdb.m_dpi->dpo_brkpt_arm(addr, instrp)) < 0)
375 mdb_warn("failed to arm breakpoint at %a", addr);
376
377 mdb_dprintf(MDB_DBG_DPI, "brkpt armed at %p %A\n", (void *)addr, addr);
378
379 return (rc);
380 }
381
382 int
kmdb_dpi_brkpt_disarm(uintptr_t addr,mdb_instr_t instrp)383 kmdb_dpi_brkpt_disarm(uintptr_t addr, mdb_instr_t instrp)
384 {
385 int rc;
386
387 if ((rc = mdb.m_dpi->dpo_brkpt_disarm(addr, instrp)) < 0)
388 mdb_warn("failed to disarm breakpoint at %a", addr);
389
390 mdb_dprintf(MDB_DBG_DPI, "brkpt disarmed at %p %A\n", (void *)addr,
391 addr);
392
393 return (rc);
394 }
395
396 int
kmdb_dpi_wapt_validate(kmdb_wapt_t * wp)397 kmdb_dpi_wapt_validate(kmdb_wapt_t *wp)
398 {
399 if (mdb.m_dpi->dpo_wapt_validate(wp) < 0)
400 return (-1); /* errno is set for us */
401
402 return (0);
403 }
404
405 int
kmdb_dpi_wapt_reserve(kmdb_wapt_t * wp)406 kmdb_dpi_wapt_reserve(kmdb_wapt_t *wp)
407 {
408 if (mdb.m_dpi->dpo_wapt_reserve(wp) < 0)
409 return (-1); /* errno is set for us */
410
411 mdb_dprintf(MDB_DBG_DPI, "wapt reserve type %d at %p, priv %p\n",
412 wp->wp_type, (void *)wp->wp_addr, wp->wp_priv);
413
414 return (0);
415 }
416
417 void
kmdb_dpi_wapt_release(kmdb_wapt_t * wp)418 kmdb_dpi_wapt_release(kmdb_wapt_t *wp)
419 {
420 mdb.m_dpi->dpo_wapt_release(wp);
421 }
422
423 void
kmdb_dpi_wapt_arm(kmdb_wapt_t * wp)424 kmdb_dpi_wapt_arm(kmdb_wapt_t *wp)
425 {
426 mdb.m_dpi->dpo_wapt_arm(wp);
427
428 mdb_dprintf(MDB_DBG_DPI, "wapt armed at %p (type %d, priv %p)\n",
429 (void *)wp->wp_addr, wp->wp_type, wp->wp_priv);
430 }
431
432 void
kmdb_dpi_wapt_disarm(kmdb_wapt_t * wp)433 kmdb_dpi_wapt_disarm(kmdb_wapt_t *wp)
434 {
435 mdb.m_dpi->dpo_wapt_disarm(wp);
436
437 mdb_dprintf(MDB_DBG_DPI, "wapt disarmed at %p (type %d, priv %p)\n",
438 (void *)wp->wp_addr, wp->wp_type, wp->wp_priv);
439 }
440
441 int
kmdb_dpi_wapt_match(kmdb_wapt_t * wp)442 kmdb_dpi_wapt_match(kmdb_wapt_t *wp)
443 {
444 return (mdb.m_dpi->dpo_wapt_match(wp));
445 }
446
447 void
kmdb_dpi_set_state(int state,int why)448 kmdb_dpi_set_state(int state, int why)
449 {
450 if (kmdb_dpi_state != DPI_STATE_LOST) {
451 mdb_dprintf(MDB_DBG_DPI, "dpi_set_state %d why %d\n",
452 state, why);
453
454 kmdb_dpi_state = state;
455 kmdb_dpi_state_why = why;
456 }
457 }
458
459 int
kmdb_dpi_get_state(int * whyp)460 kmdb_dpi_get_state(int *whyp)
461 {
462 if (whyp != NULL)
463 *whyp = kmdb_dpi_state_why;
464
465 return (kmdb_dpi_state);
466 }
467
468 void
kmdb_dpi_dump_crumbs(uintptr_t addr,int cpuid)469 kmdb_dpi_dump_crumbs(uintptr_t addr, int cpuid)
470 {
471 mdb.m_dpi->dpo_dump_crumbs(addr, cpuid);
472 }
473