1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for ITE Tech Inc. IT8712F/IT8512 CIR
4 *
5 * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
6 *
7 * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the
8 * skeleton provided by the nuvoton-cir driver.
9 *
10 * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues
11 * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus
12 * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards
13 * <jimbo-lirc@edwardsclan.net>.
14 *
15 * The lirc_ite8709 driver was written by Grégory Lardière
16 * <spmf2004-lirc@yahoo.fr> in 2008.
17 */
18
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/pnp.h>
22 #include <linux/io.h>
23 #include <linux/interrupt.h>
24 #include <linux/sched.h>
25 #include <linux/delay.h>
26 #include <linux/slab.h>
27 #include <linux/input.h>
28 #include <linux/bitops.h>
29 #include <media/rc-core.h>
30 #include <linux/pci_ids.h>
31
32 #include "ite-cir.h"
33
34 /* module parameters */
35
36 /* default sample period */
37 static long sample_period = NSEC_PER_SEC / 115200;
38 module_param(sample_period, long, S_IRUGO | S_IWUSR);
39 MODULE_PARM_DESC(sample_period, "sample period");
40
41 /* override detected model id */
42 static int model_number = -1;
43 module_param(model_number, int, S_IRUGO | S_IWUSR);
44 MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect");
45
46
47 /* HW-independent code functions */
48
49 /* check whether carrier frequency is high frequency */
ite_is_high_carrier_freq(unsigned int freq)50 static inline bool ite_is_high_carrier_freq(unsigned int freq)
51 {
52 return freq >= ITE_HCF_MIN_CARRIER_FREQ;
53 }
54
55 /* get the bits required to program the carrier frequency in CFQ bits,
56 * unshifted */
ite_get_carrier_freq_bits(unsigned int freq)57 static u8 ite_get_carrier_freq_bits(unsigned int freq)
58 {
59 if (ite_is_high_carrier_freq(freq)) {
60 if (freq < 425000)
61 return ITE_CFQ_400;
62
63 else if (freq < 465000)
64 return ITE_CFQ_450;
65
66 else if (freq < 490000)
67 return ITE_CFQ_480;
68
69 else
70 return ITE_CFQ_500;
71 } else {
72 /* trim to limits */
73 if (freq < ITE_LCF_MIN_CARRIER_FREQ)
74 freq = ITE_LCF_MIN_CARRIER_FREQ;
75 if (freq > ITE_LCF_MAX_CARRIER_FREQ)
76 freq = ITE_LCF_MAX_CARRIER_FREQ;
77
78 /* convert to kHz and subtract the base freq */
79 freq = DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ, 1000);
80
81 return (u8) freq;
82 }
83 }
84
85 /* get the bits required to program the pulse with in TXMPW */
ite_get_pulse_width_bits(unsigned int freq,int duty_cycle)86 static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle)
87 {
88 unsigned long period_ns, on_ns;
89
90 /* sanitize freq into range */
91 if (freq < ITE_LCF_MIN_CARRIER_FREQ)
92 freq = ITE_LCF_MIN_CARRIER_FREQ;
93 if (freq > ITE_HCF_MAX_CARRIER_FREQ)
94 freq = ITE_HCF_MAX_CARRIER_FREQ;
95
96 period_ns = 1000000000UL / freq;
97 on_ns = period_ns * duty_cycle / 100;
98
99 if (ite_is_high_carrier_freq(freq)) {
100 if (on_ns < 750)
101 return ITE_TXMPW_A;
102
103 else if (on_ns < 850)
104 return ITE_TXMPW_B;
105
106 else if (on_ns < 950)
107 return ITE_TXMPW_C;
108
109 else if (on_ns < 1080)
110 return ITE_TXMPW_D;
111
112 else
113 return ITE_TXMPW_E;
114 } else {
115 if (on_ns < 6500)
116 return ITE_TXMPW_A;
117
118 else if (on_ns < 7850)
119 return ITE_TXMPW_B;
120
121 else if (on_ns < 9650)
122 return ITE_TXMPW_C;
123
124 else if (on_ns < 11950)
125 return ITE_TXMPW_D;
126
127 else
128 return ITE_TXMPW_E;
129 }
130 }
131
132 /* decode raw bytes as received by the hardware, and push them to the ir-core
133 * layer */
ite_decode_bytes(struct ite_dev * dev,const u8 * data,int length)134 static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int
135 length)
136 {
137 unsigned long *ldata;
138 unsigned int next_one, next_zero, size;
139 struct ir_raw_event ev = {};
140
141 if (length == 0)
142 return;
143
144 ldata = (unsigned long *)data;
145 size = length << 3;
146 next_one = find_next_bit_le(ldata, size, 0);
147 if (next_one > 0) {
148 ev.pulse = true;
149 ev.duration = ITE_BITS_TO_US(next_one, sample_period);
150 ir_raw_event_store_with_filter(dev->rdev, &ev);
151 }
152
153 while (next_one < size) {
154 next_zero = find_next_zero_bit_le(ldata, size, next_one + 1);
155 ev.pulse = false;
156 ev.duration = ITE_BITS_TO_US(next_zero - next_one, sample_period);
157 ir_raw_event_store_with_filter(dev->rdev, &ev);
158
159 if (next_zero < size) {
160 next_one = find_next_bit_le(ldata, size, next_zero + 1);
161 ev.pulse = true;
162 ev.duration = ITE_BITS_TO_US(next_one - next_zero,
163 sample_period);
164 ir_raw_event_store_with_filter(dev->rdev, &ev);
165 } else
166 next_one = size;
167 }
168
169 ir_raw_event_handle(dev->rdev);
170
171 dev_dbg(&dev->rdev->dev, "decoded %d bytes\n", length);
172 }
173
174 /* set all the rx/tx carrier parameters; this must be called with the device
175 * spinlock held */
ite_set_carrier_params(struct ite_dev * dev)176 static void ite_set_carrier_params(struct ite_dev *dev)
177 {
178 unsigned int freq, low_freq, high_freq;
179 int allowance;
180 bool use_demodulator;
181 bool for_tx = dev->transmitting;
182
183 if (for_tx) {
184 /* we don't need no stinking calculations */
185 freq = dev->tx_carrier_freq;
186 allowance = ITE_RXDCR_DEFAULT;
187 use_demodulator = false;
188 } else {
189 low_freq = dev->rx_low_carrier_freq;
190 high_freq = dev->rx_high_carrier_freq;
191
192 if (low_freq == 0) {
193 /* don't demodulate */
194 freq = ITE_DEFAULT_CARRIER_FREQ;
195 allowance = ITE_RXDCR_DEFAULT;
196 use_demodulator = false;
197 } else {
198 /* calculate the middle freq */
199 freq = (low_freq + high_freq) / 2;
200
201 /* calculate the allowance */
202 allowance =
203 DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq),
204 ITE_RXDCR_PER_10000_STEP
205 * (high_freq + low_freq));
206
207 if (allowance < 1)
208 allowance = 1;
209
210 if (allowance > ITE_RXDCR_MAX)
211 allowance = ITE_RXDCR_MAX;
212
213 use_demodulator = true;
214 }
215 }
216
217 /* set the carrier parameters in a device-dependent way */
218 dev->params->set_carrier_params(dev, ite_is_high_carrier_freq(freq),
219 use_demodulator, ite_get_carrier_freq_bits(freq), allowance,
220 ite_get_pulse_width_bits(freq, dev->tx_duty_cycle));
221 }
222
223 /* interrupt service routine for incoming and outgoing CIR data */
ite_cir_isr(int irq,void * data)224 static irqreturn_t ite_cir_isr(int irq, void *data)
225 {
226 struct ite_dev *dev = data;
227 irqreturn_t ret = IRQ_RETVAL(IRQ_NONE);
228 u8 rx_buf[ITE_RX_FIFO_LEN];
229 int rx_bytes;
230 int iflags;
231
232 /* grab the spinlock */
233 spin_lock(&dev->lock);
234
235 /* read the interrupt flags */
236 iflags = dev->params->get_irq_causes(dev);
237
238 /* Check for RX overflow */
239 if (iflags & ITE_IRQ_RX_FIFO_OVERRUN) {
240 dev_warn(&dev->rdev->dev, "receive overflow\n");
241 ir_raw_event_overflow(dev->rdev);
242 }
243
244 /* check for the receive interrupt */
245 if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) {
246 /* read the FIFO bytes */
247 rx_bytes = dev->params->get_rx_bytes(dev, rx_buf,
248 ITE_RX_FIFO_LEN);
249
250 dev_dbg(&dev->rdev->dev, "interrupt %d RX bytes\n", rx_bytes);
251
252 if (rx_bytes > 0) {
253 /* drop the spinlock, since the ir-core layer
254 * may call us back again through
255 * ite_s_idle() */
256 spin_unlock(&dev->lock);
257
258 /* decode the data we've just received */
259 ite_decode_bytes(dev, rx_buf, rx_bytes);
260
261 /* reacquire the spinlock */
262 spin_lock(&dev->lock);
263
264 /* mark the interrupt as serviced */
265 ret = IRQ_RETVAL(IRQ_HANDLED);
266 }
267 } else if (iflags & ITE_IRQ_TX_FIFO) {
268 /* FIFO space available interrupt */
269 dev_dbg(&dev->rdev->dev, "interrupt TX FIFO\n");
270
271 /* wake any sleeping transmitter */
272 wake_up_interruptible(&dev->tx_queue);
273
274 /* mark the interrupt as serviced */
275 ret = IRQ_RETVAL(IRQ_HANDLED);
276 }
277
278 /* drop the spinlock */
279 spin_unlock(&dev->lock);
280
281 return ret;
282 }
283
284 /* set the rx carrier freq range, guess it's in Hz... */
ite_set_rx_carrier_range(struct rc_dev * rcdev,u32 carrier_low,u32 carrier_high)285 static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32
286 carrier_high)
287 {
288 unsigned long flags;
289 struct ite_dev *dev = rcdev->priv;
290
291 spin_lock_irqsave(&dev->lock, flags);
292 dev->rx_low_carrier_freq = carrier_low;
293 dev->rx_high_carrier_freq = carrier_high;
294 ite_set_carrier_params(dev);
295 spin_unlock_irqrestore(&dev->lock, flags);
296
297 return 0;
298 }
299
300 /* set the tx carrier freq, guess it's in Hz... */
ite_set_tx_carrier(struct rc_dev * rcdev,u32 carrier)301 static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier)
302 {
303 unsigned long flags;
304 struct ite_dev *dev = rcdev->priv;
305
306 spin_lock_irqsave(&dev->lock, flags);
307 dev->tx_carrier_freq = carrier;
308 ite_set_carrier_params(dev);
309 spin_unlock_irqrestore(&dev->lock, flags);
310
311 return 0;
312 }
313
314 /* set the tx duty cycle by controlling the pulse width */
ite_set_tx_duty_cycle(struct rc_dev * rcdev,u32 duty_cycle)315 static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
316 {
317 unsigned long flags;
318 struct ite_dev *dev = rcdev->priv;
319
320 spin_lock_irqsave(&dev->lock, flags);
321 dev->tx_duty_cycle = duty_cycle;
322 ite_set_carrier_params(dev);
323 spin_unlock_irqrestore(&dev->lock, flags);
324
325 return 0;
326 }
327
328 /* transmit out IR pulses; what you get here is a batch of alternating
329 * pulse/space/pulse/space lengths that we should write out completely through
330 * the FIFO, blocking on a full FIFO */
ite_tx_ir(struct rc_dev * rcdev,unsigned * txbuf,unsigned n)331 static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n)
332 {
333 unsigned long flags;
334 struct ite_dev *dev = rcdev->priv;
335 bool is_pulse = false;
336 int remaining_us, fifo_avail, fifo_remaining, last_idx = 0;
337 int max_rle_us, next_rle_us;
338 int ret = n;
339 u8 last_sent[ITE_TX_FIFO_LEN];
340 u8 val;
341
342 /* clear the array just in case */
343 memset(last_sent, 0, sizeof(last_sent));
344
345 spin_lock_irqsave(&dev->lock, flags);
346
347 /* let everybody know we're now transmitting */
348 dev->transmitting = true;
349
350 /* and set the carrier values for transmission */
351 ite_set_carrier_params(dev);
352
353 /* calculate how much time we can send in one byte */
354 max_rle_us =
355 (ITE_BAUDRATE_DIVISOR * sample_period *
356 ITE_TX_MAX_RLE) / 1000;
357
358 /* disable the receiver */
359 dev->params->disable_rx(dev);
360
361 /* this is where we'll begin filling in the FIFO, until it's full.
362 * then we'll just activate the interrupt, wait for it to wake us up
363 * again, disable it, continue filling the FIFO... until everything
364 * has been pushed out */
365 fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev);
366
367 while (n > 0) {
368 /* transmit the next sample */
369 is_pulse = !is_pulse;
370 remaining_us = *(txbuf++);
371 n--;
372
373 dev_dbg(&dev->rdev->dev, "%s: %d\n",
374 is_pulse ? "pulse" : "space", remaining_us);
375
376 /* repeat while the pulse is non-zero length */
377 while (remaining_us > 0) {
378 if (remaining_us > max_rle_us)
379 next_rle_us = max_rle_us;
380
381 else
382 next_rle_us = remaining_us;
383
384 remaining_us -= next_rle_us;
385
386 /* check what's the length we have to pump out */
387 val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us;
388
389 /* put it into the sent buffer */
390 last_sent[last_idx++] = val;
391 last_idx &= (ITE_TX_FIFO_LEN);
392
393 /* encode it for 7 bits */
394 val = (val - 1) & ITE_TX_RLE_MASK;
395
396 /* take into account pulse/space prefix */
397 if (is_pulse)
398 val |= ITE_TX_PULSE;
399
400 else
401 val |= ITE_TX_SPACE;
402
403 /*
404 * if we get to 0 available, read again, just in case
405 * some other slot got freed
406 */
407 if (fifo_avail <= 0)
408 fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev);
409
410 /* if it's still full */
411 if (fifo_avail <= 0) {
412 /* enable the tx interrupt */
413 dev->params->enable_tx_interrupt(dev);
414
415 /* drop the spinlock */
416 spin_unlock_irqrestore(&dev->lock, flags);
417
418 /* wait for the FIFO to empty enough */
419 wait_event_interruptible(dev->tx_queue,
420 (fifo_avail = ITE_TX_FIFO_LEN - dev->params->get_tx_used_slots(dev)) >= 8);
421
422 /* get the spinlock again */
423 spin_lock_irqsave(&dev->lock, flags);
424
425 /* disable the tx interrupt again. */
426 dev->params->disable_tx_interrupt(dev);
427 }
428
429 /* now send the byte through the FIFO */
430 dev->params->put_tx_byte(dev, val);
431 fifo_avail--;
432 }
433 }
434
435 /* wait and don't return until the whole FIFO has been sent out;
436 * otherwise we could configure the RX carrier params instead of the
437 * TX ones while the transmission is still being performed! */
438 fifo_remaining = dev->params->get_tx_used_slots(dev);
439 remaining_us = 0;
440 while (fifo_remaining > 0) {
441 fifo_remaining--;
442 last_idx--;
443 last_idx &= (ITE_TX_FIFO_LEN - 1);
444 remaining_us += last_sent[last_idx];
445 }
446 remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE);
447
448 /* drop the spinlock while we sleep */
449 spin_unlock_irqrestore(&dev->lock, flags);
450
451 /* sleep remaining_us microseconds */
452 mdelay(DIV_ROUND_UP(remaining_us, 1000));
453
454 /* reacquire the spinlock */
455 spin_lock_irqsave(&dev->lock, flags);
456
457 /* now we're not transmitting anymore */
458 dev->transmitting = false;
459
460 /* and set the carrier values for reception */
461 ite_set_carrier_params(dev);
462
463 /* re-enable the receiver */
464 dev->params->enable_rx(dev);
465
466 /* notify transmission end */
467 wake_up_interruptible(&dev->tx_ended);
468
469 spin_unlock_irqrestore(&dev->lock, flags);
470
471 return ret;
472 }
473
474 /* idle the receiver if needed */
ite_s_idle(struct rc_dev * rcdev,bool enable)475 static void ite_s_idle(struct rc_dev *rcdev, bool enable)
476 {
477 unsigned long flags;
478 struct ite_dev *dev = rcdev->priv;
479
480 if (enable) {
481 spin_lock_irqsave(&dev->lock, flags);
482 dev->params->idle_rx(dev);
483 spin_unlock_irqrestore(&dev->lock, flags);
484 }
485 }
486
487
488 /* IT8712F HW-specific functions */
489
490 /* retrieve a bitmask of the current causes for a pending interrupt; this may
491 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
492 * */
it87_get_irq_causes(struct ite_dev * dev)493 static int it87_get_irq_causes(struct ite_dev *dev)
494 {
495 u8 iflags;
496 int ret = 0;
497
498 /* read the interrupt flags */
499 iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II;
500
501 switch (iflags) {
502 case IT87_II_RXDS:
503 ret = ITE_IRQ_RX_FIFO;
504 break;
505 case IT87_II_RXFO:
506 ret = ITE_IRQ_RX_FIFO_OVERRUN;
507 break;
508 case IT87_II_TXLDL:
509 ret = ITE_IRQ_TX_FIFO;
510 break;
511 }
512
513 return ret;
514 }
515
516 /* set the carrier parameters; to be called with the spinlock held */
it87_set_carrier_params(struct ite_dev * dev,bool high_freq,bool use_demodulator,u8 carrier_freq_bits,u8 allowance_bits,u8 pulse_width_bits)517 static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq,
518 bool use_demodulator,
519 u8 carrier_freq_bits, u8 allowance_bits,
520 u8 pulse_width_bits)
521 {
522 u8 val;
523
524 /* program the RCR register */
525 val = inb(dev->cir_addr + IT87_RCR)
526 & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR);
527
528 if (high_freq)
529 val |= IT87_HCFS;
530
531 if (use_demodulator)
532 val |= IT87_RXEND;
533
534 val |= allowance_bits;
535
536 outb(val, dev->cir_addr + IT87_RCR);
537
538 /* program the TCR2 register */
539 outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits,
540 dev->cir_addr + IT87_TCR2);
541 }
542
543 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
544 * held */
it87_get_rx_bytes(struct ite_dev * dev,u8 * buf,int buf_size)545 static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
546 {
547 int fifo, read = 0;
548
549 /* read how many bytes are still in the FIFO */
550 fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC;
551
552 while (fifo > 0 && buf_size > 0) {
553 *(buf++) = inb(dev->cir_addr + IT87_DR);
554 fifo--;
555 read++;
556 buf_size--;
557 }
558
559 return read;
560 }
561
562 /* return how many bytes are still in the FIFO; this will be called
563 * with the device spinlock NOT HELD while waiting for the TX FIFO to get
564 * empty; let's expect this won't be a problem */
it87_get_tx_used_slots(struct ite_dev * dev)565 static int it87_get_tx_used_slots(struct ite_dev *dev)
566 {
567 return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC;
568 }
569
570 /* put a byte to the TX fifo; this should be called with the spinlock held */
it87_put_tx_byte(struct ite_dev * dev,u8 value)571 static void it87_put_tx_byte(struct ite_dev *dev, u8 value)
572 {
573 outb(value, dev->cir_addr + IT87_DR);
574 }
575
576 /* idle the receiver so that we won't receive samples until another
577 pulse is detected; this must be called with the device spinlock held */
it87_idle_rx(struct ite_dev * dev)578 static void it87_idle_rx(struct ite_dev *dev)
579 {
580 /* disable streaming by clearing RXACT writing it as 1 */
581 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT,
582 dev->cir_addr + IT87_RCR);
583
584 /* clear the FIFO */
585 outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR,
586 dev->cir_addr + IT87_TCR1);
587 }
588
589 /* disable the receiver; this must be called with the device spinlock held */
it87_disable_rx(struct ite_dev * dev)590 static void it87_disable_rx(struct ite_dev *dev)
591 {
592 /* disable the receiver interrupts */
593 outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE),
594 dev->cir_addr + IT87_IER);
595
596 /* disable the receiver */
597 outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN,
598 dev->cir_addr + IT87_RCR);
599
600 /* clear the FIFO and RXACT (actually RXACT should have been cleared
601 * in the previous outb() call) */
602 it87_idle_rx(dev);
603 }
604
605 /* enable the receiver; this must be called with the device spinlock held */
it87_enable_rx(struct ite_dev * dev)606 static void it87_enable_rx(struct ite_dev *dev)
607 {
608 /* enable the receiver by setting RXEN */
609 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN,
610 dev->cir_addr + IT87_RCR);
611
612 /* just prepare it to idle for the next reception */
613 it87_idle_rx(dev);
614
615 /* enable the receiver interrupts and master enable flag */
616 outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC,
617 dev->cir_addr + IT87_IER);
618 }
619
620 /* disable the transmitter interrupt; this must be called with the device
621 * spinlock held */
it87_disable_tx_interrupt(struct ite_dev * dev)622 static void it87_disable_tx_interrupt(struct ite_dev *dev)
623 {
624 /* disable the transmitter interrupts */
625 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE,
626 dev->cir_addr + IT87_IER);
627 }
628
629 /* enable the transmitter interrupt; this must be called with the device
630 * spinlock held */
it87_enable_tx_interrupt(struct ite_dev * dev)631 static void it87_enable_tx_interrupt(struct ite_dev *dev)
632 {
633 /* enable the transmitter interrupts and master enable flag */
634 outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC,
635 dev->cir_addr + IT87_IER);
636 }
637
638 /* disable the device; this must be called with the device spinlock held */
it87_disable(struct ite_dev * dev)639 static void it87_disable(struct ite_dev *dev)
640 {
641 /* clear out all interrupt enable flags */
642 outb(inb(dev->cir_addr + IT87_IER) &
643 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE),
644 dev->cir_addr + IT87_IER);
645
646 /* disable the receiver */
647 it87_disable_rx(dev);
648
649 /* erase the FIFO */
650 outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1),
651 dev->cir_addr + IT87_TCR1);
652 }
653
654 /* initialize the hardware */
it87_init_hardware(struct ite_dev * dev)655 static void it87_init_hardware(struct ite_dev *dev)
656 {
657 /* enable just the baud rate divisor register,
658 disabling all the interrupts at the same time */
659 outb((inb(dev->cir_addr + IT87_IER) &
660 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR,
661 dev->cir_addr + IT87_IER);
662
663 /* write out the baud rate divisor */
664 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR);
665 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR);
666
667 /* disable the baud rate divisor register again */
668 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR,
669 dev->cir_addr + IT87_IER);
670
671 /* program the RCR register defaults */
672 outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR);
673
674 /* program the TCR1 register */
675 outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE
676 | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR,
677 dev->cir_addr + IT87_TCR1);
678
679 /* program the carrier parameters */
680 ite_set_carrier_params(dev);
681 }
682
683 /* IT8512F on ITE8708 HW-specific functions */
684
685 /* retrieve a bitmask of the current causes for a pending interrupt; this may
686 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
687 * */
it8708_get_irq_causes(struct ite_dev * dev)688 static int it8708_get_irq_causes(struct ite_dev *dev)
689 {
690 u8 iflags;
691 int ret = 0;
692
693 /* read the interrupt flags */
694 iflags = inb(dev->cir_addr + IT8708_C0IIR);
695
696 if (iflags & IT85_TLDLI)
697 ret |= ITE_IRQ_TX_FIFO;
698 if (iflags & IT85_RDAI)
699 ret |= ITE_IRQ_RX_FIFO;
700 if (iflags & IT85_RFOI)
701 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
702
703 return ret;
704 }
705
706 /* set the carrier parameters; to be called with the spinlock held */
it8708_set_carrier_params(struct ite_dev * dev,bool high_freq,bool use_demodulator,u8 carrier_freq_bits,u8 allowance_bits,u8 pulse_width_bits)707 static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq,
708 bool use_demodulator,
709 u8 carrier_freq_bits, u8 allowance_bits,
710 u8 pulse_width_bits)
711 {
712 u8 val;
713
714 /* program the C0CFR register, with HRAE=1 */
715 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
716 dev->cir_addr + IT8708_BANKSEL);
717
718 val = (inb(dev->cir_addr + IT8708_C0CFR)
719 & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits;
720
721 if (high_freq)
722 val |= IT85_HCFS;
723
724 outb(val, dev->cir_addr + IT8708_C0CFR);
725
726 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
727 dev->cir_addr + IT8708_BANKSEL);
728
729 /* program the C0RCR register */
730 val = inb(dev->cir_addr + IT8708_C0RCR)
731 & ~(IT85_RXEND | IT85_RXDCR);
732
733 if (use_demodulator)
734 val |= IT85_RXEND;
735
736 val |= allowance_bits;
737
738 outb(val, dev->cir_addr + IT8708_C0RCR);
739
740 /* program the C0TCR register */
741 val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW;
742 val |= pulse_width_bits;
743 outb(val, dev->cir_addr + IT8708_C0TCR);
744 }
745
746 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
747 * held */
it8708_get_rx_bytes(struct ite_dev * dev,u8 * buf,int buf_size)748 static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
749 {
750 int fifo, read = 0;
751
752 /* read how many bytes are still in the FIFO */
753 fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC;
754
755 while (fifo > 0 && buf_size > 0) {
756 *(buf++) = inb(dev->cir_addr + IT8708_C0DR);
757 fifo--;
758 read++;
759 buf_size--;
760 }
761
762 return read;
763 }
764
765 /* return how many bytes are still in the FIFO; this will be called
766 * with the device spinlock NOT HELD while waiting for the TX FIFO to get
767 * empty; let's expect this won't be a problem */
it8708_get_tx_used_slots(struct ite_dev * dev)768 static int it8708_get_tx_used_slots(struct ite_dev *dev)
769 {
770 return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC;
771 }
772
773 /* put a byte to the TX fifo; this should be called with the spinlock held */
it8708_put_tx_byte(struct ite_dev * dev,u8 value)774 static void it8708_put_tx_byte(struct ite_dev *dev, u8 value)
775 {
776 outb(value, dev->cir_addr + IT8708_C0DR);
777 }
778
779 /* idle the receiver so that we won't receive samples until another
780 pulse is detected; this must be called with the device spinlock held */
it8708_idle_rx(struct ite_dev * dev)781 static void it8708_idle_rx(struct ite_dev *dev)
782 {
783 /* disable streaming by clearing RXACT writing it as 1 */
784 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT,
785 dev->cir_addr + IT8708_C0RCR);
786
787 /* clear the FIFO */
788 outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR,
789 dev->cir_addr + IT8708_C0MSTCR);
790 }
791
792 /* disable the receiver; this must be called with the device spinlock held */
it8708_disable_rx(struct ite_dev * dev)793 static void it8708_disable_rx(struct ite_dev *dev)
794 {
795 /* disable the receiver interrupts */
796 outb(inb(dev->cir_addr + IT8708_C0IER) &
797 ~(IT85_RDAIE | IT85_RFOIE),
798 dev->cir_addr + IT8708_C0IER);
799
800 /* disable the receiver */
801 outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN,
802 dev->cir_addr + IT8708_C0RCR);
803
804 /* clear the FIFO and RXACT (actually RXACT should have been cleared
805 * in the previous outb() call) */
806 it8708_idle_rx(dev);
807 }
808
809 /* enable the receiver; this must be called with the device spinlock held */
it8708_enable_rx(struct ite_dev * dev)810 static void it8708_enable_rx(struct ite_dev *dev)
811 {
812 /* enable the receiver by setting RXEN */
813 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN,
814 dev->cir_addr + IT8708_C0RCR);
815
816 /* just prepare it to idle for the next reception */
817 it8708_idle_rx(dev);
818
819 /* enable the receiver interrupts and master enable flag */
820 outb(inb(dev->cir_addr + IT8708_C0IER)
821 |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
822 dev->cir_addr + IT8708_C0IER);
823 }
824
825 /* disable the transmitter interrupt; this must be called with the device
826 * spinlock held */
it8708_disable_tx_interrupt(struct ite_dev * dev)827 static void it8708_disable_tx_interrupt(struct ite_dev *dev)
828 {
829 /* disable the transmitter interrupts */
830 outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE,
831 dev->cir_addr + IT8708_C0IER);
832 }
833
834 /* enable the transmitter interrupt; this must be called with the device
835 * spinlock held */
it8708_enable_tx_interrupt(struct ite_dev * dev)836 static void it8708_enable_tx_interrupt(struct ite_dev *dev)
837 {
838 /* enable the transmitter interrupts and master enable flag */
839 outb(inb(dev->cir_addr + IT8708_C0IER)
840 |IT85_TLDLIE | IT85_IEC,
841 dev->cir_addr + IT8708_C0IER);
842 }
843
844 /* disable the device; this must be called with the device spinlock held */
it8708_disable(struct ite_dev * dev)845 static void it8708_disable(struct ite_dev *dev)
846 {
847 /* clear out all interrupt enable flags */
848 outb(inb(dev->cir_addr + IT8708_C0IER) &
849 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
850 dev->cir_addr + IT8708_C0IER);
851
852 /* disable the receiver */
853 it8708_disable_rx(dev);
854
855 /* erase the FIFO */
856 outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR),
857 dev->cir_addr + IT8708_C0MSTCR);
858 }
859
860 /* initialize the hardware */
it8708_init_hardware(struct ite_dev * dev)861 static void it8708_init_hardware(struct ite_dev *dev)
862 {
863 /* disable all the interrupts */
864 outb(inb(dev->cir_addr + IT8708_C0IER) &
865 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
866 dev->cir_addr + IT8708_C0IER);
867
868 /* program the baud rate divisor */
869 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE,
870 dev->cir_addr + IT8708_BANKSEL);
871
872 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR);
873 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
874 dev->cir_addr + IT8708_C0BDHR);
875
876 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE,
877 dev->cir_addr + IT8708_BANKSEL);
878
879 /* program the C0MSTCR register defaults */
880 outb((inb(dev->cir_addr + IT8708_C0MSTCR) &
881 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL |
882 IT85_FIFOCLR | IT85_RESET)) |
883 IT85_FIFOTL_DEFAULT,
884 dev->cir_addr + IT8708_C0MSTCR);
885
886 /* program the C0RCR register defaults */
887 outb((inb(dev->cir_addr + IT8708_C0RCR) &
888 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND |
889 IT85_RXACT | IT85_RXDCR)) |
890 ITE_RXDCR_DEFAULT,
891 dev->cir_addr + IT8708_C0RCR);
892
893 /* program the C0TCR register defaults */
894 outb((inb(dev->cir_addr + IT8708_C0TCR) &
895 ~(IT85_TXMPM | IT85_TXMPW))
896 |IT85_TXRLE | IT85_TXENDF |
897 IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT,
898 dev->cir_addr + IT8708_C0TCR);
899
900 /* program the carrier parameters */
901 ite_set_carrier_params(dev);
902 }
903
904 /* IT8512F on ITE8709 HW-specific functions */
905
906 /* read a byte from the SRAM module */
it8709_rm(struct ite_dev * dev,int index)907 static inline u8 it8709_rm(struct ite_dev *dev, int index)
908 {
909 outb(index, dev->cir_addr + IT8709_RAM_IDX);
910 return inb(dev->cir_addr + IT8709_RAM_VAL);
911 }
912
913 /* write a byte to the SRAM module */
it8709_wm(struct ite_dev * dev,u8 val,int index)914 static inline void it8709_wm(struct ite_dev *dev, u8 val, int index)
915 {
916 outb(index, dev->cir_addr + IT8709_RAM_IDX);
917 outb(val, dev->cir_addr + IT8709_RAM_VAL);
918 }
919
it8709_wait(struct ite_dev * dev)920 static void it8709_wait(struct ite_dev *dev)
921 {
922 int i = 0;
923 /*
924 * loop until device tells it's ready to continue
925 * iterations count is usually ~750 but can sometimes achieve 13000
926 */
927 for (i = 0; i < 15000; i++) {
928 udelay(2);
929 if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE)
930 break;
931 }
932 }
933
934 /* read the value of a CIR register */
it8709_rr(struct ite_dev * dev,int index)935 static u8 it8709_rr(struct ite_dev *dev, int index)
936 {
937 /* just wait in case the previous access was a write */
938 it8709_wait(dev);
939 it8709_wm(dev, index, IT8709_REG_IDX);
940 it8709_wm(dev, IT8709_READ, IT8709_MODE);
941
942 /* wait for the read data to be available */
943 it8709_wait(dev);
944
945 /* return the read value */
946 return it8709_rm(dev, IT8709_REG_VAL);
947 }
948
949 /* write the value of a CIR register */
it8709_wr(struct ite_dev * dev,u8 val,int index)950 static void it8709_wr(struct ite_dev *dev, u8 val, int index)
951 {
952 /* we wait before writing, and not afterwards, since this allows us to
953 * pipeline the host CPU with the microcontroller */
954 it8709_wait(dev);
955 it8709_wm(dev, val, IT8709_REG_VAL);
956 it8709_wm(dev, index, IT8709_REG_IDX);
957 it8709_wm(dev, IT8709_WRITE, IT8709_MODE);
958 }
959
960 /* retrieve a bitmask of the current causes for a pending interrupt; this may
961 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN
962 * */
it8709_get_irq_causes(struct ite_dev * dev)963 static int it8709_get_irq_causes(struct ite_dev *dev)
964 {
965 u8 iflags;
966 int ret = 0;
967
968 /* read the interrupt flags */
969 iflags = it8709_rm(dev, IT8709_IIR);
970
971 if (iflags & IT85_TLDLI)
972 ret |= ITE_IRQ_TX_FIFO;
973 if (iflags & IT85_RDAI)
974 ret |= ITE_IRQ_RX_FIFO;
975 if (iflags & IT85_RFOI)
976 ret |= ITE_IRQ_RX_FIFO_OVERRUN;
977
978 return ret;
979 }
980
981 /* set the carrier parameters; to be called with the spinlock held */
it8709_set_carrier_params(struct ite_dev * dev,bool high_freq,bool use_demodulator,u8 carrier_freq_bits,u8 allowance_bits,u8 pulse_width_bits)982 static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq,
983 bool use_demodulator,
984 u8 carrier_freq_bits, u8 allowance_bits,
985 u8 pulse_width_bits)
986 {
987 u8 val;
988
989 val = (it8709_rr(dev, IT85_C0CFR)
990 &~(IT85_HCFS | IT85_CFQ)) |
991 carrier_freq_bits;
992
993 if (high_freq)
994 val |= IT85_HCFS;
995
996 it8709_wr(dev, val, IT85_C0CFR);
997
998 /* program the C0RCR register */
999 val = it8709_rr(dev, IT85_C0RCR)
1000 & ~(IT85_RXEND | IT85_RXDCR);
1001
1002 if (use_demodulator)
1003 val |= IT85_RXEND;
1004
1005 val |= allowance_bits;
1006
1007 it8709_wr(dev, val, IT85_C0RCR);
1008
1009 /* program the C0TCR register */
1010 val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW;
1011 val |= pulse_width_bits;
1012 it8709_wr(dev, val, IT85_C0TCR);
1013 }
1014
1015 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock
1016 * held */
it8709_get_rx_bytes(struct ite_dev * dev,u8 * buf,int buf_size)1017 static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size)
1018 {
1019 int fifo, read = 0;
1020
1021 /* read how many bytes are still in the FIFO */
1022 fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC;
1023
1024 while (fifo > 0 && buf_size > 0) {
1025 *(buf++) = it8709_rm(dev, IT8709_FIFO + read);
1026 fifo--;
1027 read++;
1028 buf_size--;
1029 }
1030
1031 /* 'clear' the FIFO by setting the writing index to 0; this is
1032 * completely bound to be racy, but we can't help it, since it's a
1033 * limitation of the protocol */
1034 it8709_wm(dev, 0, IT8709_RFSR);
1035
1036 return read;
1037 }
1038
1039 /* return how many bytes are still in the FIFO; this will be called
1040 * with the device spinlock NOT HELD while waiting for the TX FIFO to get
1041 * empty; let's expect this won't be a problem */
it8709_get_tx_used_slots(struct ite_dev * dev)1042 static int it8709_get_tx_used_slots(struct ite_dev *dev)
1043 {
1044 return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC;
1045 }
1046
1047 /* put a byte to the TX fifo; this should be called with the spinlock held */
it8709_put_tx_byte(struct ite_dev * dev,u8 value)1048 static void it8709_put_tx_byte(struct ite_dev *dev, u8 value)
1049 {
1050 it8709_wr(dev, value, IT85_C0DR);
1051 }
1052
1053 /* idle the receiver so that we won't receive samples until another
1054 pulse is detected; this must be called with the device spinlock held */
it8709_idle_rx(struct ite_dev * dev)1055 static void it8709_idle_rx(struct ite_dev *dev)
1056 {
1057 /* disable streaming by clearing RXACT writing it as 1 */
1058 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT,
1059 IT85_C0RCR);
1060
1061 /* clear the FIFO */
1062 it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR,
1063 IT85_C0MSTCR);
1064 }
1065
1066 /* disable the receiver; this must be called with the device spinlock held */
it8709_disable_rx(struct ite_dev * dev)1067 static void it8709_disable_rx(struct ite_dev *dev)
1068 {
1069 /* disable the receiver interrupts */
1070 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1071 ~(IT85_RDAIE | IT85_RFOIE),
1072 IT85_C0IER);
1073
1074 /* disable the receiver */
1075 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN,
1076 IT85_C0RCR);
1077
1078 /* clear the FIFO and RXACT (actually RXACT should have been cleared
1079 * in the previous it8709_wr(dev, ) call) */
1080 it8709_idle_rx(dev);
1081 }
1082
1083 /* enable the receiver; this must be called with the device spinlock held */
it8709_enable_rx(struct ite_dev * dev)1084 static void it8709_enable_rx(struct ite_dev *dev)
1085 {
1086 /* enable the receiver by setting RXEN */
1087 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN,
1088 IT85_C0RCR);
1089
1090 /* just prepare it to idle for the next reception */
1091 it8709_idle_rx(dev);
1092
1093 /* enable the receiver interrupts and master enable flag */
1094 it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1095 |IT85_RDAIE | IT85_RFOIE | IT85_IEC,
1096 IT85_C0IER);
1097 }
1098
1099 /* disable the transmitter interrupt; this must be called with the device
1100 * spinlock held */
it8709_disable_tx_interrupt(struct ite_dev * dev)1101 static void it8709_disable_tx_interrupt(struct ite_dev *dev)
1102 {
1103 /* disable the transmitter interrupts */
1104 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE,
1105 IT85_C0IER);
1106 }
1107
1108 /* enable the transmitter interrupt; this must be called with the device
1109 * spinlock held */
it8709_enable_tx_interrupt(struct ite_dev * dev)1110 static void it8709_enable_tx_interrupt(struct ite_dev *dev)
1111 {
1112 /* enable the transmitter interrupts and master enable flag */
1113 it8709_wr(dev, it8709_rr(dev, IT85_C0IER)
1114 |IT85_TLDLIE | IT85_IEC,
1115 IT85_C0IER);
1116 }
1117
1118 /* disable the device; this must be called with the device spinlock held */
it8709_disable(struct ite_dev * dev)1119 static void it8709_disable(struct ite_dev *dev)
1120 {
1121 /* clear out all interrupt enable flags */
1122 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1123 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1124 IT85_C0IER);
1125
1126 /* disable the receiver */
1127 it8709_disable_rx(dev);
1128
1129 /* erase the FIFO */
1130 it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR),
1131 IT85_C0MSTCR);
1132 }
1133
1134 /* initialize the hardware */
it8709_init_hardware(struct ite_dev * dev)1135 static void it8709_init_hardware(struct ite_dev *dev)
1136 {
1137 /* disable all the interrupts */
1138 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) &
1139 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE),
1140 IT85_C0IER);
1141
1142 /* program the baud rate divisor */
1143 it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR);
1144 it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff,
1145 IT85_C0BDHR);
1146
1147 /* program the C0MSTCR register defaults */
1148 it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) &
1149 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL
1150 | IT85_FIFOCLR | IT85_RESET)) | IT85_FIFOTL_DEFAULT,
1151 IT85_C0MSTCR);
1152
1153 /* program the C0RCR register defaults */
1154 it8709_wr(dev, (it8709_rr(dev, IT85_C0RCR) &
1155 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | IT85_RXACT
1156 | IT85_RXDCR)) | ITE_RXDCR_DEFAULT,
1157 IT85_C0RCR);
1158
1159 /* program the C0TCR register defaults */
1160 it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR) & ~(IT85_TXMPM | IT85_TXMPW))
1161 | IT85_TXRLE | IT85_TXENDF | IT85_TXMPM_DEFAULT
1162 | IT85_TXMPW_DEFAULT,
1163 IT85_C0TCR);
1164
1165 /* program the carrier parameters */
1166 ite_set_carrier_params(dev);
1167 }
1168
1169
1170 /* generic hardware setup/teardown code */
1171
1172 /* activate the device for use */
ite_open(struct rc_dev * rcdev)1173 static int ite_open(struct rc_dev *rcdev)
1174 {
1175 struct ite_dev *dev = rcdev->priv;
1176 unsigned long flags;
1177
1178 spin_lock_irqsave(&dev->lock, flags);
1179
1180 /* enable the receiver */
1181 dev->params->enable_rx(dev);
1182
1183 spin_unlock_irqrestore(&dev->lock, flags);
1184
1185 return 0;
1186 }
1187
1188 /* deactivate the device for use */
ite_close(struct rc_dev * rcdev)1189 static void ite_close(struct rc_dev *rcdev)
1190 {
1191 struct ite_dev *dev = rcdev->priv;
1192 unsigned long flags;
1193
1194 spin_lock_irqsave(&dev->lock, flags);
1195
1196 /* wait for any transmission to end */
1197 spin_unlock_irqrestore(&dev->lock, flags);
1198 wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1199 spin_lock_irqsave(&dev->lock, flags);
1200
1201 dev->params->disable(dev);
1202
1203 spin_unlock_irqrestore(&dev->lock, flags);
1204 }
1205
1206 /* supported models and their parameters */
1207 static const struct ite_dev_params ite_dev_descs[] = {
1208 { /* 0: ITE8704 */
1209 .model = "ITE8704 CIR transceiver",
1210 .io_region_size = IT87_IOREG_LENGTH,
1211 .io_rsrc_no = 0,
1212
1213 /* operations */
1214 .get_irq_causes = it87_get_irq_causes,
1215 .enable_rx = it87_enable_rx,
1216 .idle_rx = it87_idle_rx,
1217 .disable_rx = it87_idle_rx,
1218 .get_rx_bytes = it87_get_rx_bytes,
1219 .enable_tx_interrupt = it87_enable_tx_interrupt,
1220 .disable_tx_interrupt = it87_disable_tx_interrupt,
1221 .get_tx_used_slots = it87_get_tx_used_slots,
1222 .put_tx_byte = it87_put_tx_byte,
1223 .disable = it87_disable,
1224 .init_hardware = it87_init_hardware,
1225 .set_carrier_params = it87_set_carrier_params,
1226 },
1227 { /* 1: ITE8713 */
1228 .model = "ITE8713 CIR transceiver",
1229 .io_region_size = IT87_IOREG_LENGTH,
1230 .io_rsrc_no = 0,
1231
1232 /* operations */
1233 .get_irq_causes = it87_get_irq_causes,
1234 .enable_rx = it87_enable_rx,
1235 .idle_rx = it87_idle_rx,
1236 .disable_rx = it87_idle_rx,
1237 .get_rx_bytes = it87_get_rx_bytes,
1238 .enable_tx_interrupt = it87_enable_tx_interrupt,
1239 .disable_tx_interrupt = it87_disable_tx_interrupt,
1240 .get_tx_used_slots = it87_get_tx_used_slots,
1241 .put_tx_byte = it87_put_tx_byte,
1242 .disable = it87_disable,
1243 .init_hardware = it87_init_hardware,
1244 .set_carrier_params = it87_set_carrier_params,
1245 },
1246 { /* 2: ITE8708 */
1247 .model = "ITE8708 CIR transceiver",
1248 .io_region_size = IT8708_IOREG_LENGTH,
1249 .io_rsrc_no = 0,
1250
1251 /* operations */
1252 .get_irq_causes = it8708_get_irq_causes,
1253 .enable_rx = it8708_enable_rx,
1254 .idle_rx = it8708_idle_rx,
1255 .disable_rx = it8708_idle_rx,
1256 .get_rx_bytes = it8708_get_rx_bytes,
1257 .enable_tx_interrupt = it8708_enable_tx_interrupt,
1258 .disable_tx_interrupt =
1259 it8708_disable_tx_interrupt,
1260 .get_tx_used_slots = it8708_get_tx_used_slots,
1261 .put_tx_byte = it8708_put_tx_byte,
1262 .disable = it8708_disable,
1263 .init_hardware = it8708_init_hardware,
1264 .set_carrier_params = it8708_set_carrier_params,
1265 },
1266 { /* 3: ITE8709 */
1267 .model = "ITE8709 CIR transceiver",
1268 .io_region_size = IT8709_IOREG_LENGTH,
1269 .io_rsrc_no = 2,
1270
1271 /* operations */
1272 .get_irq_causes = it8709_get_irq_causes,
1273 .enable_rx = it8709_enable_rx,
1274 .idle_rx = it8709_idle_rx,
1275 .disable_rx = it8709_idle_rx,
1276 .get_rx_bytes = it8709_get_rx_bytes,
1277 .enable_tx_interrupt = it8709_enable_tx_interrupt,
1278 .disable_tx_interrupt =
1279 it8709_disable_tx_interrupt,
1280 .get_tx_used_slots = it8709_get_tx_used_slots,
1281 .put_tx_byte = it8709_put_tx_byte,
1282 .disable = it8709_disable,
1283 .init_hardware = it8709_init_hardware,
1284 .set_carrier_params = it8709_set_carrier_params,
1285 },
1286 };
1287
1288 static const struct pnp_device_id ite_ids[] = {
1289 {"ITE8704", 0}, /* Default model */
1290 {"ITE8713", 1}, /* CIR found in EEEBox 1501U */
1291 {"ITE8708", 2}, /* Bridged IT8512 */
1292 {"ITE8709", 3}, /* SRAM-Bridged IT8512 */
1293 {"", 0},
1294 };
1295
1296 /* allocate memory, probe hardware, and initialize everything */
ite_probe(struct pnp_dev * pdev,const struct pnp_device_id * dev_id)1297 static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
1298 *dev_id)
1299 {
1300 const struct ite_dev_params *dev_desc = NULL;
1301 struct ite_dev *itdev = NULL;
1302 struct rc_dev *rdev = NULL;
1303 int ret = -ENOMEM;
1304 int model_no;
1305 int io_rsrc_no;
1306
1307 itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL);
1308 if (!itdev)
1309 return ret;
1310
1311 /* input device for IR remote (and tx) */
1312 rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
1313 if (!rdev)
1314 goto exit_free_dev_rdev;
1315 itdev->rdev = rdev;
1316
1317 ret = -ENODEV;
1318
1319 /* get the model number */
1320 model_no = (int)dev_id->driver_data;
1321 dev_dbg(&pdev->dev, "Auto-detected model: %s\n",
1322 ite_dev_descs[model_no].model);
1323
1324 if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
1325 model_no = model_number;
1326 dev_info(&pdev->dev, "model has been forced to: %s",
1327 ite_dev_descs[model_no].model);
1328 }
1329
1330 /* get the description for the device */
1331 dev_desc = &ite_dev_descs[model_no];
1332 io_rsrc_no = dev_desc->io_rsrc_no;
1333
1334 /* validate pnp resources */
1335 if (!pnp_port_valid(pdev, io_rsrc_no) ||
1336 pnp_port_len(pdev, io_rsrc_no) < dev_desc->io_region_size) {
1337 dev_err(&pdev->dev, "IR PNP Port not valid!\n");
1338 goto exit_free_dev_rdev;
1339 }
1340
1341 if (!pnp_irq_valid(pdev, 0)) {
1342 dev_err(&pdev->dev, "PNP IRQ not valid!\n");
1343 goto exit_free_dev_rdev;
1344 }
1345
1346 /* store resource values */
1347 itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
1348 itdev->cir_irq = pnp_irq(pdev, 0);
1349
1350 /* initialize spinlocks */
1351 spin_lock_init(&itdev->lock);
1352
1353 /* set driver data into the pnp device */
1354 pnp_set_drvdata(pdev, itdev);
1355 itdev->pdev = pdev;
1356
1357 /* initialize waitqueues for transmission */
1358 init_waitqueue_head(&itdev->tx_queue);
1359 init_waitqueue_head(&itdev->tx_ended);
1360
1361 /* Set model-specific parameters */
1362 itdev->params = dev_desc;
1363
1364 /* set up hardware initial state */
1365 itdev->tx_duty_cycle = 33;
1366 itdev->tx_carrier_freq = ITE_DEFAULT_CARRIER_FREQ;
1367 itdev->params->init_hardware(itdev);
1368
1369 /* set up ir-core props */
1370 rdev->priv = itdev;
1371 rdev->dev.parent = &pdev->dev;
1372 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
1373 rdev->open = ite_open;
1374 rdev->close = ite_close;
1375 rdev->s_idle = ite_s_idle;
1376 rdev->s_rx_carrier_range = ite_set_rx_carrier_range;
1377 /* FIFO threshold is 17 bytes, so 17 * 8 samples minimum */
1378 rdev->min_timeout = 17 * 8 * ITE_BAUDRATE_DIVISOR *
1379 sample_period / 1000;
1380 rdev->timeout = IR_DEFAULT_TIMEOUT;
1381 rdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
1382 rdev->rx_resolution = ITE_BAUDRATE_DIVISOR * sample_period / 1000;
1383
1384 /* set up transmitter related values */
1385 rdev->tx_ir = ite_tx_ir;
1386 rdev->s_tx_carrier = ite_set_tx_carrier;
1387 rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
1388
1389 rdev->device_name = dev_desc->model;
1390 rdev->input_id.bustype = BUS_HOST;
1391 rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
1392 rdev->input_id.product = 0;
1393 rdev->input_id.version = 0;
1394 rdev->driver_name = ITE_DRIVER_NAME;
1395 rdev->map_name = RC_MAP_RC6_MCE;
1396
1397 ret = rc_register_device(rdev);
1398 if (ret)
1399 goto exit_free_dev_rdev;
1400
1401 ret = -EBUSY;
1402 /* now claim resources */
1403 if (!request_region(itdev->cir_addr,
1404 dev_desc->io_region_size, ITE_DRIVER_NAME))
1405 goto exit_unregister_device;
1406
1407 if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED,
1408 ITE_DRIVER_NAME, (void *)itdev))
1409 goto exit_release_cir_addr;
1410
1411 return 0;
1412
1413 exit_release_cir_addr:
1414 release_region(itdev->cir_addr, itdev->params->io_region_size);
1415 exit_unregister_device:
1416 rc_unregister_device(rdev);
1417 rdev = NULL;
1418 exit_free_dev_rdev:
1419 rc_free_device(rdev);
1420 kfree(itdev);
1421
1422 return ret;
1423 }
1424
ite_remove(struct pnp_dev * pdev)1425 static void ite_remove(struct pnp_dev *pdev)
1426 {
1427 struct ite_dev *dev = pnp_get_drvdata(pdev);
1428 unsigned long flags;
1429
1430 spin_lock_irqsave(&dev->lock, flags);
1431
1432 /* disable hardware */
1433 dev->params->disable(dev);
1434
1435 spin_unlock_irqrestore(&dev->lock, flags);
1436
1437 /* free resources */
1438 free_irq(dev->cir_irq, dev);
1439 release_region(dev->cir_addr, dev->params->io_region_size);
1440
1441 rc_unregister_device(dev->rdev);
1442
1443 kfree(dev);
1444 }
1445
ite_suspend(struct pnp_dev * pdev,pm_message_t state)1446 static int ite_suspend(struct pnp_dev *pdev, pm_message_t state)
1447 {
1448 struct ite_dev *dev = pnp_get_drvdata(pdev);
1449 unsigned long flags;
1450
1451 /* wait for any transmission to end */
1452 wait_event_interruptible(dev->tx_ended, !dev->transmitting);
1453
1454 spin_lock_irqsave(&dev->lock, flags);
1455
1456 /* disable all interrupts */
1457 dev->params->disable(dev);
1458
1459 spin_unlock_irqrestore(&dev->lock, flags);
1460
1461 return 0;
1462 }
1463
ite_resume(struct pnp_dev * pdev)1464 static int ite_resume(struct pnp_dev *pdev)
1465 {
1466 struct ite_dev *dev = pnp_get_drvdata(pdev);
1467 unsigned long flags;
1468
1469 spin_lock_irqsave(&dev->lock, flags);
1470
1471 /* reinitialize hardware config registers */
1472 dev->params->init_hardware(dev);
1473 /* enable the receiver */
1474 dev->params->enable_rx(dev);
1475
1476 spin_unlock_irqrestore(&dev->lock, flags);
1477
1478 return 0;
1479 }
1480
ite_shutdown(struct pnp_dev * pdev)1481 static void ite_shutdown(struct pnp_dev *pdev)
1482 {
1483 struct ite_dev *dev = pnp_get_drvdata(pdev);
1484 unsigned long flags;
1485
1486 spin_lock_irqsave(&dev->lock, flags);
1487
1488 /* disable all interrupts */
1489 dev->params->disable(dev);
1490
1491 spin_unlock_irqrestore(&dev->lock, flags);
1492 }
1493
1494 static struct pnp_driver ite_driver = {
1495 .name = ITE_DRIVER_NAME,
1496 .id_table = ite_ids,
1497 .probe = ite_probe,
1498 .remove = ite_remove,
1499 .suspend = ite_suspend,
1500 .resume = ite_resume,
1501 .shutdown = ite_shutdown,
1502 };
1503
1504 MODULE_DEVICE_TABLE(pnp, ite_ids);
1505 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver");
1506
1507 MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>");
1508 MODULE_LICENSE("GPL");
1509
1510 module_pnp_driver(ite_driver);
1511