1 /* 2 * Copyright (c) 2017-2018 Cavium, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 16 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 19 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25 * POSSIBILITY OF SUCH DAMAGE. 26 * 27 */ 28 29 #ifndef __ECORE_PROTO_IF_H__ 30 #define __ECORE_PROTO_IF_H__ 31 32 /* 33 * PF parameters (according to personality/protocol) 34 */ 35 36 #define ECORE_ROCE_PROTOCOL_INDEX (3) 37 38 struct ecore_eth_pf_params { 39 /* The following parameters are used during HW-init 40 * and these parameters need to be passed as arguments 41 * to update_pf_params routine invoked before slowpath start 42 */ 43 u16 num_cons; 44 45 /* per-VF number of CIDs */ 46 u8 num_vf_cons; 47 #define ETH_PF_PARAMS_VF_CONS_DEFAULT (32) 48 49 /* To enable arfs, previous to HW-init a positive number needs to be 50 * set [as filters require allocated searcher ILT memory]. 51 * This will set the maximal number of configured steering-filters. 52 */ 53 u32 num_arfs_filters; 54 }; 55 56 /* Most of the the parameters below are described in the FW FCoE HSI */ 57 struct ecore_fcoe_pf_params { 58 /* The following parameters are used during protocol-init */ 59 u64 glbl_q_params_addr; 60 u64 bdq_pbl_base_addr[2]; 61 62 /* The following parameters are used during HW-init 63 * and these parameters need to be passed as arguments 64 * to update_pf_params routine invoked before slowpath start 65 */ 66 u16 num_cons; 67 u16 num_tasks; 68 69 /* The following parameters are used during protocol-init */ 70 u16 sq_num_pbl_pages; 71 72 u16 cq_num_entries; 73 u16 cmdq_num_entries; 74 u16 rq_buffer_log_size; 75 u16 mtu; 76 u16 dummy_icid; 77 u16 bdq_xoff_threshold[2]; 78 u16 bdq_xon_threshold[2]; 79 u16 rq_buffer_size; 80 u8 num_cqs; /* num of global CQs */ 81 u8 log_page_size; 82 u8 gl_rq_pi; 83 u8 gl_cmd_pi; 84 u8 debug_mode; 85 u8 is_target; 86 u8 bdq_pbl_num_entries[2]; 87 }; 88 89 /* Most of the the parameters below are described in the FW iSCSI / TCP HSI */ 90 struct ecore_iscsi_pf_params { 91 u64 glbl_q_params_addr; 92 u64 bdq_pbl_base_addr[3]; 93 u16 cq_num_entries; 94 u16 cmdq_num_entries; 95 u32 two_msl_timer; 96 u16 tx_sws_timer; 97 /* The following parameters are used during HW-init 98 * and these parameters need to be passed as arguments 99 * to update_pf_params routine invoked before slowpath start 100 */ 101 u16 num_cons; 102 u16 num_tasks; 103 104 /* The following parameters are used during protocol-init */ 105 u16 half_way_close_timeout; 106 u16 bdq_xoff_threshold[3]; 107 u16 bdq_xon_threshold[3]; 108 u16 cmdq_xoff_threshold; 109 u16 cmdq_xon_threshold; 110 u16 rq_buffer_size; 111 112 u8 num_sq_pages_in_ring; 113 u8 num_r2tq_pages_in_ring; 114 u8 num_uhq_pages_in_ring; 115 u8 num_queues; 116 u8 log_page_size; 117 u8 rqe_log_size; 118 u8 max_fin_rt; 119 u8 gl_rq_pi; 120 u8 gl_cmd_pi; 121 u8 debug_mode; 122 u8 ll2_ooo_queue_id; 123 124 u8 is_target; 125 u8 is_soc_en; 126 u8 soc_num_of_blocks_log; 127 u8 bdq_pbl_num_entries[3]; 128 u8 disable_stats_collection; 129 }; 130 131 enum ecore_rdma_protocol { 132 ECORE_RDMA_PROTOCOL_DEFAULT, 133 ECORE_RDMA_PROTOCOL_NONE, 134 ECORE_RDMA_PROTOCOL_ROCE, 135 ECORE_RDMA_PROTOCOL_IWARP, 136 }; 137 138 struct ecore_rdma_pf_params { 139 /* Supplied to ECORE during resource allocation (may affect the ILT and 140 * the doorbell BAR). 141 */ 142 u32 min_dpis; /* number of requested DPIs */ 143 u32 num_qps; /* number of requested Queue Pairs */ 144 u32 num_srqs; /* number of requested SRQs */ 145 u32 num_xrc_srqs; /* number of requested XRC SRQs */ 146 u8 roce_edpm_mode; /* see QED_ROCE_EDPM_MODE_ENABLE */ 147 u8 gl_pi; /* protocol index */ 148 149 /* Will allocate rate limiters to be used with QPs */ 150 u8 enable_dcqcn; 151 152 /* Max number of CNQs - limits number of ECORE_RDMA_CNQ feature, 153 * Allowing an incrementation in ECORE_PF_L2_QUE. 154 * To disable CNQs, use dedicated value instead of `0'. 155 */ 156 #define ECORE_RDMA_PF_PARAMS_CNQS_NONE (0xffff) 157 u16 max_cnqs; 158 159 /* TCP port number used for the iwarp traffic */ 160 u16 iwarp_port; 161 enum ecore_rdma_protocol rdma_protocol; 162 }; 163 164 struct ecore_pf_params { 165 struct ecore_eth_pf_params eth_pf_params; 166 struct ecore_fcoe_pf_params fcoe_pf_params; 167 struct ecore_iscsi_pf_params iscsi_pf_params; 168 struct ecore_rdma_pf_params rdma_pf_params; 169 }; 170 171 #endif 172