1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2000 by Cisco Systems, Inc. All rights reserved.
23 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
24 *
25 * iSCSI Software Initiator
26 */
27
28 /*
29 * Framework interface routines for iSCSI
30 */
31
32 #include "iscsi.h" /* main header */
33 #include <sys/iscsi_protocol.h> /* protocol structs */
34 #include <sys/scsi/adapters/iscsi_if.h> /* ioctl interfaces */
35 #include "iscsi_targetparam.h"
36 #include "persistent.h"
37 #include <sys/scsi/adapters/iscsi_door.h>
38 #include <sys/dlpi.h>
39 #include <sys/utsname.h>
40 #include "isns_client.h"
41 #include "isns_protocol.h"
42 #include <sys/bootprops.h>
43 #include <sys/types.h>
44 #include <sys/bootconf.h>
45
46 #define ISCSI_NAME_VERSION "iSCSI Initiator v-1.55"
47
48 #define MAX_GET_NAME_SIZE 1024
49 #define MAX_NAME_PROP_SIZE 256
50 #define UNDEFINED -1
51 #define ISCSI_DISC_DELAY 2 /* seconds */
52
53 /*
54 * +--------------------------------------------------------------------+
55 * | iscsi globals |
56 * +--------------------------------------------------------------------+
57 */
58 void *iscsi_state;
59 kmutex_t iscsi_oid_mutex;
60 uint32_t iscsi_oid;
61 int iscsi_nop_delay = ISCSI_DEFAULT_NOP_DELAY;
62 int iscsi_rx_window = ISCSI_DEFAULT_RX_WINDOW;
63 int iscsi_rx_max_window = ISCSI_DEFAULT_RX_MAX_WINDOW;
64 boolean_t iscsi_logging = B_FALSE;
65
66 extern ib_boot_prop_t *iscsiboot_prop;
67 extern int modrootloaded;
68 extern struct bootobj rootfs;
69
70 /*
71 * +--------------------------------------------------------------------+
72 * | iscsi.c prototypes |
73 * +--------------------------------------------------------------------+
74 */
75 static int iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd,
76 void *arg, void **result);
77 static int iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd);
78 static int iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd);
79
80 /* scsi_tran prototypes */
81 static int iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
82 scsi_hba_tran_t *hba_tran, struct scsi_device *sd);
83 static int iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ());
84 static struct scsi_pkt *iscsi_tran_init_pkt(struct scsi_address *ap,
85 struct scsi_pkt *pkt, struct buf *bp, int cmdlen, int statuslen,
86 int tgtlen, int flags, int (*callback) (), caddr_t arg);
87 static void iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip,
88 scsi_hba_tran_t *hba_tran, struct scsi_device *sd);
89 static int iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt);
90 static int iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt);
91 static int iscsi_tran_reset(struct scsi_address *ap, int level);
92 static int iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom);
93 static int iscsi_tran_setcap(struct scsi_address *ap, char *cap,
94 int value, int whom);
95 static void iscsi_tran_destroy_pkt(struct scsi_address *ap,
96 struct scsi_pkt *pkt);
97 static void iscsi_tran_dmafree(struct scsi_address *ap,
98 struct scsi_pkt *pkt);
99 static void iscsi_tran_sync_pkt(struct scsi_address *ap,
100 struct scsi_pkt *pkt);
101 static void iscsi_tran_sync_pkt(struct scsi_address *ap,
102 struct scsi_pkt *pkt);
103 static int iscsi_tran_reset_notify(struct scsi_address *ap, int flag,
104 void (*callback) (caddr_t), caddr_t arg);
105 static int iscsi_tran_bus_config(dev_info_t *parent, uint_t flags,
106 ddi_bus_config_op_t op, void *arg, dev_info_t **childp);
107 static int iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flags,
108 ddi_bus_config_op_t op, void *arg);
109 static int iscsi_tran_get_name(struct scsi_device *sd, char *name, int len);
110 static int iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len);
111
112 /* bus_ops prototypes */
113 /* LINTED E_STATIC_UNUSED */
114 static ddi_intrspec_t iscsi_get_intrspec(dev_info_t *dip, dev_info_t *rdip,
115 uint_t inumber);
116 /* LINTED E_STATIC_UNUSED */
117 static int iscsi_add_intrspec(dev_info_t *dip, dev_info_t *rdip,
118 ddi_intrspec_t intrspec, ddi_iblock_cookie_t *iblock_cookiep,
119 ddi_idevice_cookie_t *idevice_cookiep, uint_t (*int_handler)(caddr_t
120 int_handler_arg), caddr_t int_handler_arg, int kind);
121 /* LINTED E_STATIC_UNUSED */
122 static void iscsi_remove_intrspec(dev_info_t *dip, dev_info_t *rdip,
123 ddi_intrspec_t intrspec, ddi_iblock_cookie_t iblock_cookie);
124 /* LINTED E_STATIC_UNUSED */
125 static int iscsi_ctl(dev_info_t *dip, dev_info_t *rdip, ddi_ctl_enum_t ctlop,
126 void *arg, void *result);
127
128 /* cb_ops prototypes */
129 static int iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp);
130 static int iscsi_close(dev_t dev, int flag, int otyp, cred_t *credp);
131 static int iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode,
132 cred_t *credp, int *rvalp);
133
134 int iscsi_get_persisted_param(uchar_t *name,
135 iscsi_param_get_t *ipgp,
136 iscsi_login_params_t *params);
137 static void iscsi_override_target_default(iscsi_hba_t *ihp,
138 iscsi_param_get_t *ipg);
139
140 /* scsi_tran helpers */
141 static int iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
142 scsi_hba_tran_t *hba_tran, struct scsi_device *sd);
143 static int iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
144 scsi_hba_tran_t *hba_tran, struct scsi_device *sd);
145 static int iscsi_i_commoncap(struct scsi_address *ap, char *cap,
146 int val, int lunonly, int doset);
147 static void iscsi_get_name_to_iqn(char *name, int name_max_len);
148 static void iscsi_get_name_from_iqn(char *name, int name_max_len);
149 static boolean_t iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid);
150
151 /* iscsi initiator service helpers */
152 static boolean_t iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status);
153 static void iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status);
154 static void iscsi_check_miniroot(iscsi_hba_t *ihp);
155 static void iscsi_get_tunable_default(iscsi_tunable_object_t *param);
156 static int iscsi_get_persisted_tunable_param(uchar_t *name,
157 iscsi_tunable_object_t *tpsg);
158 static void iscsi_set_default_tunable_params(iscsi_tunable_params_t *params);
159
160 /* struct helpers prototypes */
161
162 /*
163 * At this point this driver doesn't need this structure because nothing
164 * is done during the open, close or ioctl. Code put in place because
165 * some admin related work might be done in the ioctl routine.
166 */
167 static struct cb_ops iscsi_cb_ops = {
168 iscsi_open, /* open */
169 iscsi_close, /* close */
170 nodev, /* strategy */
171 nodev, /* print */
172 nodev, /* dump */
173 nodev, /* read */
174 nodev, /* write */
175 iscsi_ioctl, /* ioctl */
176 nodev, /* devmap */
177 nodev, /* mmap */
178 nodev, /* segmap */
179 nochpoll, /* poll */
180 ddi_prop_op, /* prop_op */
181 NULL, /* streamtab */
182 D_NEW | D_MP | D_HOTPLUG, /* flags */
183 CB_REV, /* cb_rev */
184 nodev, /* aread */
185 nodev, /* awrite */
186 };
187
188 static struct dev_ops iscsi_dev_ops = {
189 DEVO_REV, /* devo_rev */
190 0, /* refcnt */
191 iscsi_getinfo, /* getinfo */
192 nulldev, /* identify */
193 nulldev, /* probe */
194 iscsi_attach, /* attach */
195 iscsi_detach, /* detach */
196 nodev, /* reset */
197 &iscsi_cb_ops, /* driver operations */
198 NULL, /* bus ops */
199 NULL, /* power management */
200 ddi_quiesce_not_needed, /* quiesce */
201 };
202
203 static struct modldrv modldrv = {
204 &mod_driverops, /* drv_modops */
205 ISCSI_NAME_VERSION, /* drv_linkinfo */
206 &iscsi_dev_ops /* drv_dev_ops */
207 };
208
209 static struct modlinkage modlinkage = {
210 MODREV_1, /* ml_rev */
211 &modldrv, /* ml_linkage[] */
212 NULL /* NULL termination */
213 };
214
215 /*
216 * This structure is bogus. scsi_hba_attach_setup() requires, as in the kernel
217 * will panic if you don't pass this in to the routine, this information.
218 * Need to determine what the actual impact to the system is by providing
219 * this information if any. Since dma allocation is done in pkt_init it may
220 * not have any impact. These values are straight from the Writing Device
221 * Driver manual.
222 */
223 static ddi_dma_attr_t iscsi_dma_attr = {
224 DMA_ATTR_V0, /* ddi_dma_attr version */
225 0, /* low address */
226 0xffffffff, /* high address */
227 0x00ffffff, /* counter upper bound */
228 1, /* alignment requirements */
229 0x3f, /* burst sizes */
230 1, /* minimum DMA access */
231 0xffffffff, /* maximum DMA access */
232 (1 << 24) - 1, /* segment boundary restrictions */
233 1, /* scater/gather list length */
234 512, /* device granularity */
235 0 /* DMA flags */
236 };
237
238 /*
239 * _init - General driver init entry
240 */
241 int
_init(void)242 _init(void)
243 {
244 int rval = 0;
245
246 iscsi_net_init();
247
248 mutex_init(&iscsi_oid_mutex, NULL, MUTEX_DRIVER, NULL);
249 iscsi_oid = ISCSI_INITIATOR_OID;
250
251 /*
252 * Set up the soft state structures. If this driver is actually
253 * being attached to the system then we'll have at least one
254 * HBA/NIC used.
255 */
256 rval = ddi_soft_state_init(&iscsi_state,
257 sizeof (iscsi_hba_t), 1);
258 if (rval != 0) {
259 iscsi_net_fini();
260 goto init_done;
261 }
262
263 rval = scsi_hba_init(&modlinkage);
264 if (rval != 0) {
265 ddi_soft_state_fini(&iscsi_state);
266 iscsi_net_fini();
267 goto init_done;
268 }
269
270 rval = mod_install(&modlinkage);
271 if (rval != 0) {
272 ddi_soft_state_fini(&iscsi_state);
273 scsi_hba_fini(&modlinkage);
274 iscsi_net_fini();
275 goto init_done;
276 }
277 (void) iscsi_door_ini();
278
279 init_done:
280 return (rval);
281 }
282
283 /*
284 * _fini - General driver destructor entry
285 */
286 int
_fini(void)287 _fini(void)
288 {
289 int rval = 0;
290
291 rval = mod_remove(&modlinkage);
292 if (rval == 0) {
293 scsi_hba_fini(&modlinkage);
294 ddi_soft_state_fini(&iscsi_state);
295 mutex_destroy(&iscsi_oid_mutex);
296 (void) iscsi_door_term();
297 iscsi_net_fini();
298 }
299 return (rval);
300 }
301
302 /*
303 * _info - General driver info entry
304 */
305 int
_info(struct modinfo * mp)306 _info(struct modinfo *mp)
307 {
308 int rval = 0;
309
310 rval = mod_info(&modlinkage, mp);
311
312 return (rval);
313 }
314
315
316 /*
317 * +--------------------------------------------------------------------+
318 * | Start of dev_ops routines |
319 * +--------------------------------------------------------------------+
320 */
321
322 /*
323 * iscsi_getinfo - returns general driver information
324 */
325 /* ARGSUSED */
326 static int
iscsi_getinfo(dev_info_t * dip,ddi_info_cmd_t infocmd,void * arg,void ** result)327 iscsi_getinfo(dev_info_t *dip, ddi_info_cmd_t infocmd,
328 void *arg, void **result)
329 {
330 int rval = DDI_SUCCESS;
331 int instance = getminor((dev_t)arg);
332 iscsi_hba_t *ip;
333
334 switch (infocmd) {
335 case DDI_INFO_DEVT2DEVINFO:
336 if ((ip = ddi_get_soft_state(iscsi_state, instance)) == NULL) {
337 return (DDI_FAILURE);
338 }
339 *result = ip->hba_dip;
340 if (ip->hba_dip == NULL)
341 rval = DDI_FAILURE;
342 else
343 rval = DDI_SUCCESS;
344 break;
345
346 case DDI_INFO_DEVT2INSTANCE:
347 *result = (void *)(uintptr_t)instance;
348 rval = DDI_SUCCESS;
349 break;
350
351 default:
352 rval = DDI_FAILURE;
353 break;
354 }
355 return (rval);
356 }
357
358
359 /*
360 * iscsi_attach -- Attach instance of an iSCSI HBA. We
361 * will attempt to create our HBA and register it with
362 * scsi_vhci. If it's not possible to create the HBA
363 * or register with vhci we will fail the attach.
364 */
365 static int
iscsi_attach(dev_info_t * dip,ddi_attach_cmd_t cmd)366 iscsi_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
367 {
368 int rval = DDI_SUCCESS;
369 int instance = ddi_get_instance(dip);
370 iscsi_hba_t *ihp = NULL;
371 scsi_hba_tran_t *tran = NULL;
372 char init_port_name[MAX_NAME_PROP_SIZE];
373
374 switch (cmd) {
375 case DDI_ATTACH:
376 /* create iSCSH HBA devctl device node */
377 if (ddi_create_minor_node(dip, ISCSI_DEVCTL, S_IFCHR, 0,
378 DDI_PSEUDO, 0) == DDI_SUCCESS) {
379
380 /* allocate HBA soft state */
381 if (ddi_soft_state_zalloc(iscsi_state, instance) !=
382 DDI_SUCCESS) {
383 ddi_remove_minor_node(dip, NULL);
384 rval = DDI_FAILURE;
385 break;
386 }
387
388 /* get reference to soft state */
389 if ((ihp = (iscsi_hba_t *)ddi_get_soft_state(
390 iscsi_state, instance)) == NULL) {
391 ddi_remove_minor_node(dip, NULL);
392 ddi_soft_state_free(iscsi_state, instance);
393 rval = DDI_FAILURE;
394 break;
395 }
396
397 /* init HBA mutex used to protect discovery events */
398 mutex_init(&ihp->hba_discovery_events_mutex, NULL,
399 MUTEX_DRIVER, NULL);
400
401 /* Get LDI ident */
402 rval = ldi_ident_from_dip(dip, &ihp->hba_li);
403 ASSERT(rval == 0); /* Failure indicates invalid arg */
404
405 /* init HBA mutex used to protect service status */
406 mutex_init(&ihp->hba_service_lock, NULL,
407 MUTEX_DRIVER, NULL);
408 cv_init(&ihp->hba_service_cv, NULL, CV_DRIVER, NULL);
409
410 /*
411 * init SendTargets semaphore that is used to allow
412 * only one operation at a time
413 */
414 sema_init(&ihp->hba_sendtgts_semaphore, 1, NULL,
415 SEMA_DRIVER, NULL);
416
417 ihp->hba_sess_list = NULL;
418 rw_init(&ihp->hba_sess_list_rwlock, NULL,
419 RW_DRIVER, NULL);
420
421 /* allocate scsi_hba_tran */
422 if ((tran = scsi_hba_tran_alloc(dip, SCSI_HBA_CANSLEEP))
423 == NULL) {
424 ddi_remove_minor_node(dip, NULL);
425 goto iscsi_attach_failed2;
426 }
427
428 /* soft state setup */
429 ihp->hba_sig = ISCSI_SIG_HBA;
430 ihp->hba_tran = tran;
431 ihp->hba_dip = dip;
432 if (iscsiboot_prop == NULL) {
433 ihp->hba_service_status =
434 ISCSI_SERVICE_DISABLED;
435 ihp->hba_service_status_overwrite = B_FALSE;
436 } else {
437 ihp->hba_service_status =
438 ISCSI_SERVICE_ENABLED;
439 ihp->hba_service_status_overwrite = B_TRUE;
440 }
441 ihp->hba_service_client_count = 0;
442
443 mutex_enter(&iscsi_oid_mutex);
444 ihp->hba_oid = iscsi_oid++;
445 mutex_exit(&iscsi_oid_mutex);
446
447 ihp->hba_name[0] = '\0';
448 ihp->hba_name_length = 0;
449 ihp->hba_alias_length = 0;
450 ihp->hba_alias[0] = '\0';
451
452 iscsi_net->tweaks.rcvbuf = ddi_prop_get_int(
453 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-rcvbuf",
454 ISCSI_SOCKET_RCVBUF_SIZE);
455
456 iscsi_net->tweaks.sndbuf = ddi_prop_get_int(
457 DDI_DEV_T_ANY, ihp->hba_dip, 0, "so-sndbuf",
458 ISCSI_SOCKET_SNDBUF_SIZE);
459
460 iscsi_net->tweaks.nodelay = ddi_prop_get_int(
461 DDI_DEV_T_ANY, ihp->hba_dip, 0, "tcp-nodelay",
462 ISCSI_TCP_NODELAY_DEFAULT);
463
464 iscsi_net->tweaks.conn_notify_threshold =
465 ddi_prop_get_int(DDI_DEV_T_ANY,
466 ihp->hba_dip, 0, "tcp-conn-notify-threshold",
467 ISCSI_TCP_CNOTIFY_THRESHOLD_DEFAULT);
468
469 iscsi_net->tweaks.conn_abort_threshold =
470 ddi_prop_get_int(DDI_DEV_T_ANY, ihp->hba_dip,
471 0, "tcp-conn-abort-threshold",
472 ISCSI_TCP_CABORT_THRESHOLD_DEFAULT);
473
474 iscsi_net->tweaks.abort_threshold = ddi_prop_get_int(
475 DDI_DEV_T_ANY, ihp->hba_dip, 0,
476 "tcp-abort-threshold",
477 ISCSI_TCP_ABORT_THRESHOLD_DEFAULT);
478
479 ihp->hba_config_storm_delay = ddi_prop_get_int(
480 DDI_DEV_T_ANY, ihp->hba_dip, 0,
481 "config-storm-delay",
482 ISCSI_CONFIG_STORM_DELAY_DEFAULT);
483
484 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
485 "so-rcvbuf", iscsi_net->tweaks.rcvbuf);
486
487 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
488 "so-sndbuf", iscsi_net->tweaks.sndbuf);
489
490 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
491 "tcp-nodelay", iscsi_net->tweaks.nodelay);
492
493 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
494 "tcp-conn-notify-threshold",
495 iscsi_net->tweaks.conn_notify_threshold);
496
497 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
498 "tcp-conn-abort-threshold",
499 iscsi_net->tweaks.conn_abort_threshold);
500
501 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
502 "tcp-abort-threshold",
503 iscsi_net->tweaks.abort_threshold);
504
505 (void) ddi_prop_update_int(DDI_DEV_T_NONE, ihp->hba_dip,
506 "config-storm-delay",
507 ihp->hba_config_storm_delay);
508
509 /* setup hba defaults */
510 iscsi_set_default_login_params(&ihp->hba_params);
511 iscsi_set_default_tunable_params(
512 &ihp->hba_tunable_params);
513
514 /* setup minimal initiator params */
515 iscsid_set_default_initiator_node_settings(ihp, B_TRUE);
516
517 /* hba set up */
518 tran->tran_hba_private = ihp;
519 tran->tran_tgt_private = NULL;
520 tran->tran_tgt_init = iscsi_tran_lun_init;
521 tran->tran_tgt_probe = iscsi_tran_lun_probe;
522 tran->tran_tgt_free = iscsi_tran_lun_free;
523 tran->tran_start = iscsi_tran_start;
524 tran->tran_abort = iscsi_tran_abort;
525 tran->tran_reset = iscsi_tran_reset;
526 tran->tran_getcap = iscsi_tran_getcap;
527 tran->tran_setcap = iscsi_tran_setcap;
528 tran->tran_init_pkt = iscsi_tran_init_pkt;
529 tran->tran_destroy_pkt = iscsi_tran_destroy_pkt;
530 tran->tran_dmafree = iscsi_tran_dmafree;
531 tran->tran_sync_pkt = iscsi_tran_sync_pkt;
532 tran->tran_reset_notify = iscsi_tran_reset_notify;
533 tran->tran_bus_config = iscsi_tran_bus_config;
534 tran->tran_bus_unconfig = iscsi_tran_bus_unconfig;
535
536 tran->tran_get_name = iscsi_tran_get_name;
537 tran->tran_get_bus_addr = iscsi_tran_get_bus_addr;
538 tran->tran_interconnect_type = INTERCONNECT_ISCSI;
539
540 /* register scsi hba with scsa */
541 if (scsi_hba_attach_setup(dip, &iscsi_dma_attr,
542 tran, SCSI_HBA_TRAN_CLONE) != DDI_SUCCESS) {
543 goto iscsi_attach_failed1;
544 }
545
546 /* register scsi hba with mdi (MPxIO/vhci) */
547 if (mdi_phci_register(MDI_HCI_CLASS_SCSI, dip, 0) !=
548 MDI_SUCCESS) {
549 ihp->hba_mpxio_enabled = B_FALSE;
550 } else {
551 ihp->hba_mpxio_enabled = B_TRUE;
552 }
553
554 (void) iscsi_hba_kstat_init(ihp);
555
556 /* Initialize targetparam list */
557 iscsi_targetparam_init();
558
559 /* Initialize ISID */
560 ihp->hba_isid[0] = ISCSI_SUN_ISID_0;
561 ihp->hba_isid[1] = ISCSI_SUN_ISID_1;
562 ihp->hba_isid[2] = ISCSI_SUN_ISID_2;
563 ihp->hba_isid[3] = ISCSI_SUN_ISID_3;
564 ihp->hba_isid[4] = ISCSI_SUN_ISID_4;
565 ihp->hba_isid[5] = ISCSI_SUN_ISID_5;
566
567 /* Setup iSNS transport services and client */
568 isns_client_init();
569
570 /*
571 * initialize persistent store,
572 * or boot target info in case of iscsi boot
573 */
574 ihp->hba_persistent_loaded = B_FALSE;
575 if (iscsid_init(ihp) == B_FALSE) {
576 goto iscsi_attach_failed0;
577 }
578
579 /* Setup init_port_name for MPAPI */
580 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE,
581 "%s,%02x%02x%02x%02x%02x%02x",
582 (char *)ihp->hba_name, ihp->hba_isid[0],
583 ihp->hba_isid[1], ihp->hba_isid[2],
584 ihp->hba_isid[3], ihp->hba_isid[4],
585 ihp->hba_isid[5]);
586
587 if (ddi_prop_update_string(DDI_DEV_T_NONE, dip,
588 SCSI_ADDR_PROP_INITIATOR_PORT, init_port_name) !=
589 DDI_PROP_SUCCESS) {
590 cmn_err(CE_WARN, "iscsi_attach: Creating "
591 SCSI_ADDR_PROP_INITIATOR_PORT
592 " property on iSCSI "
593 "HBA(%s) with dip(%d) Failed",
594 (char *)ihp->hba_name,
595 ddi_get_instance(dip));
596 }
597
598 ddi_report_dev(dip);
599 } else {
600 rval = DDI_FAILURE;
601 }
602 break;
603
604 iscsi_attach_failed0:
605 isns_client_cleanup();
606 if (ihp->stats.ks) {
607 (void) iscsi_hba_kstat_term(ihp);
608 }
609 if (ihp->hba_mpxio_enabled == B_TRUE) {
610 (void) mdi_phci_unregister(dip, 0);
611 }
612 (void) scsi_hba_detach(ihp->hba_dip);
613 iscsi_attach_failed1:
614 ddi_remove_minor_node(dip, NULL);
615 ddi_prop_remove_all(ihp->hba_dip);
616 scsi_hba_tran_free(tran);
617 iscsi_attach_failed2:
618 cv_destroy(&ihp->hba_service_cv);
619 mutex_destroy(&ihp->hba_service_lock);
620 mutex_destroy(&ihp->hba_discovery_events_mutex);
621 sema_destroy(&ihp->hba_sendtgts_semaphore);
622 rw_destroy(&ihp->hba_sess_list_rwlock);
623 ddi_soft_state_free(iscsi_state, instance);
624 rval = DDI_FAILURE;
625 break;
626
627 case DDI_RESUME:
628 break;
629
630 default:
631 rval = DDI_FAILURE;
632 }
633
634 if (rval != DDI_SUCCESS) {
635 cmn_err(CE_WARN, "iscsi driver unable to attach "
636 "hba instance %d", instance);
637 }
638
639 return (rval);
640 }
641
642 /*
643 * iscsi_detach - called on unload of hba instance
644 */
645 static int
iscsi_detach(dev_info_t * dip,ddi_detach_cmd_t cmd)646 iscsi_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
647 {
648 int rval = DDI_SUCCESS;
649 scsi_hba_tran_t *tran = NULL;
650 iscsi_hba_t *ihp = NULL;
651 iscsi_hba_t *ihp_check = NULL;
652 int instance;
653 char *init_node_name;
654
655 instance = ddi_get_instance(dip);
656
657 switch (cmd) {
658 case DDI_DETACH:
659 if (!(tran = (scsi_hba_tran_t *)ddi_get_driver_private(dip))) {
660 rval = DDI_SUCCESS;
661 break;
662 }
663
664 if ((ihp = (iscsi_hba_t *)tran->tran_hba_private) == NULL) {
665 rval = DDI_FAILURE;
666 break;
667 }
668
669 /*
670 * Validate that what is stored by the DDI framework is still
671 * the same state structure referenced by the SCSI framework
672 */
673 ihp_check = ddi_get_soft_state(iscsi_state, instance);
674 if (ihp_check != ihp) {
675 rval = DDI_FAILURE;
676 break;
677 }
678
679 /* If a session exists we can't safely detach */
680 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
681 if (ihp->hba_sess_list != NULL) {
682 rw_exit(&ihp->hba_sess_list_rwlock);
683 rval = DDI_FAILURE;
684 break;
685 }
686 rw_exit(&ihp->hba_sess_list_rwlock);
687
688 /* Disable all discovery services */
689 if (iscsid_disable_discovery(ihp,
690 ISCSI_ALL_DISCOVERY_METHODS) == B_FALSE) {
691 /* Disable failed. Fail detach */
692 rval = DDI_FAILURE;
693 break;
694 }
695
696 /* Deregister from iSNS server(s). */
697 init_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
698 if (persistent_initiator_name_get(init_node_name,
699 ISCSI_MAX_NAME_LEN) == B_TRUE) {
700 if (strlen(init_node_name) > 0) {
701 (void) isns_dereg(ihp->hba_isid,
702 (uint8_t *)init_node_name);
703 }
704 }
705 kmem_free(init_node_name, ISCSI_MAX_NAME_LEN);
706 init_node_name = NULL;
707
708 /* Cleanup iSNS Client */
709 isns_client_cleanup();
710
711 iscsi_targetparam_cleanup();
712
713 /* Cleanup iscsid resources */
714 iscsid_fini();
715
716 if (rval != DDI_SUCCESS) {
717 break;
718 }
719 /* kstat hba. destroy */
720 KSTAT_DEC_HBA_CNTR_SESS(ihp);
721
722 if (ihp->hba_mpxio_enabled == B_TRUE) {
723 (void) mdi_phci_unregister(dip, 0);
724 }
725 ddi_remove_minor_node(dip, NULL);
726
727 ddi_prop_remove_all(ihp->hba_dip);
728
729 ldi_ident_release(ihp->hba_li);
730
731 cv_destroy(&ihp->hba_service_cv);
732 mutex_destroy(&ihp->hba_service_lock);
733 mutex_destroy(&ihp->hba_discovery_events_mutex);
734 rw_destroy(&ihp->hba_sess_list_rwlock);
735 (void) iscsi_hba_kstat_term(ihp);
736
737 (void) scsi_hba_detach(dip);
738 if (tran != NULL) {
739 scsi_hba_tran_free(tran);
740 }
741 ddi_soft_state_free(iscsi_state, instance);
742 break;
743 default:
744 break;
745 }
746
747 if (rval != DDI_SUCCESS) {
748 cmn_err(CE_WARN, "iscsi driver unable to "
749 "detach hba instance %d", instance);
750 }
751
752 return (rval);
753 }
754
755 /*
756 * +--------------------------------------------------------------------+
757 * | End of dev_ops routines |
758 * +--------------------------------------------------------------------+
759 */
760
761 /*
762 * +--------------------------------------------------------------------+
763 * | scsi_tran(9E) routines |
764 * +--------------------------------------------------------------------+
765 */
766
767 /*
768 * iscsi_tran_lun_init - Find target device based on SCSI device
769 * Based on the information given (SCSI device, target dev_info) find
770 * the target iSCSI device and put a pointer to that information in
771 * the scsi_hba_tran_t structure.
772 */
773 static int
iscsi_tran_lun_init(dev_info_t * hba_dip,dev_info_t * lun_dip,scsi_hba_tran_t * hba_tran,struct scsi_device * sd)774 iscsi_tran_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
775 scsi_hba_tran_t *hba_tran, struct scsi_device *sd)
776 {
777 int rval = 0;
778 int type = 0;
779
780 ASSERT(hba_tran->tran_hba_private != NULL);
781
782 /*
783 * Child node is getting initialized. Look at the mpxio component
784 * type on the child device to see if this device is mpxio managed
785 * or not.
786 */
787 type = mdi_get_component_type(lun_dip);
788 if (type != MDI_COMPONENT_CLIENT) {
789 rval = iscsi_phys_lun_init(hba_dip, lun_dip, hba_tran, sd);
790 } else {
791 rval = iscsi_virt_lun_init(hba_dip, lun_dip, hba_tran, sd);
792 }
793
794 return (rval);
795 }
796
797 /*
798 * iscsi_tran_lun_probe - This function didn't need to be implemented.
799 * We could have left NULL in the tran table. Since this isn't a
800 * performance path this seems safe. We are just wrappering the
801 * function so we can see the call go through if we have debugging
802 * enabled.
803 */
804 static int
iscsi_tran_lun_probe(struct scsi_device * sd,int (* callback)())805 iscsi_tran_lun_probe(struct scsi_device *sd, int (*callback) ())
806 {
807 int rval = 0;
808
809 rval = scsi_hba_probe(sd, callback);
810
811 return (rval);
812 }
813
814 /*
815 * iscsi_init_pkt - Allocate SCSI packet and fill in required info.
816 */
817 /* ARGSUSED */
818 static struct scsi_pkt *
iscsi_tran_init_pkt(struct scsi_address * ap,struct scsi_pkt * pkt,struct buf * bp,int cmdlen,int statuslen,int tgtlen,int flags,int (* callback)(),caddr_t arg)819 iscsi_tran_init_pkt(struct scsi_address *ap, struct scsi_pkt *pkt,
820 struct buf *bp, int cmdlen, int statuslen, int tgtlen, int flags,
821 int (*callback) (), caddr_t arg)
822 {
823 iscsi_lun_t *ilp;
824 iscsi_cmd_t *icmdp;
825
826 ASSERT(ap != NULL);
827 ASSERT(callback == NULL_FUNC || callback == SLEEP_FUNC);
828
829 /*
830 * The software stack doesn't have DMA which means the iSCSI
831 * protocol layer will be doing a bcopy from bp to outgoing
832 * streams buffers. Make sure that the buffer is mapped in
833 * so that the copy won't panic the system.
834 */
835 if (bp && (bp->b_bcount != 0) &&
836 bp_mapin_common(bp, (callback == NULL_FUNC) ?
837 VM_NOSLEEP : VM_SLEEP) == NULL) {
838 return (NULL);
839 }
840
841 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private;
842 ASSERT(ilp != NULL);
843
844 if (pkt == NULL) {
845 pkt = scsi_hba_pkt_alloc(ilp->lun_sess->sess_hba->hba_dip,
846 ap, cmdlen, statuslen, tgtlen, sizeof (iscsi_cmd_t),
847 callback, arg);
848 if (pkt == NULL) {
849 return (NULL);
850 }
851 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private;
852 icmdp->cmd_sig = ISCSI_SIG_CMD;
853 icmdp->cmd_state = ISCSI_CMD_STATE_FREE;
854 icmdp->cmd_lun = ilp;
855 icmdp->cmd_type = ISCSI_CMD_TYPE_SCSI;
856 /* add the report lun addressing type on to the lun */
857 icmdp->cmd_un.scsi.lun = ilp->lun_addr_type << 14;
858 icmdp->cmd_un.scsi.lun = icmdp->cmd_un.scsi.lun |
859 ilp->lun_num;
860 icmdp->cmd_un.scsi.pkt = pkt;
861 icmdp->cmd_un.scsi.bp = bp;
862 icmdp->cmd_un.scsi.cmdlen = cmdlen;
863 icmdp->cmd_un.scsi.statuslen = statuslen;
864 icmdp->cmd_crc_error_seen = B_FALSE;
865 icmdp->cmd_misc_flags = 0;
866 if (flags & PKT_XARQ) {
867 icmdp->cmd_misc_flags |= ISCSI_CMD_MISCFLAG_XARQ;
868 }
869
870
871 idm_sm_audit_init(&icmdp->cmd_state_audit);
872
873 mutex_init(&icmdp->cmd_mutex, NULL, MUTEX_DRIVER, NULL);
874 cv_init(&icmdp->cmd_completion, NULL, CV_DRIVER, NULL);
875
876 pkt->pkt_address = *ap;
877 pkt->pkt_comp = (void (*)())NULL;
878 pkt->pkt_flags = 0;
879 pkt->pkt_time = 0;
880 pkt->pkt_resid = 0;
881 pkt->pkt_statistics = 0;
882 pkt->pkt_reason = 0;
883 }
884 return (pkt);
885 }
886
887 /*
888 * iscsi_tran_lun_free - Free a SCSI LUN
889 */
890 static void
iscsi_tran_lun_free(dev_info_t * hba_dip,dev_info_t * lun_dip,scsi_hba_tran_t * hba_tran,struct scsi_device * sd)891 iscsi_tran_lun_free(dev_info_t *hba_dip, dev_info_t *lun_dip,
892 scsi_hba_tran_t *hba_tran, struct scsi_device *sd)
893 {
894 iscsi_lun_t *ilp = NULL;
895
896 ASSERT(hba_dip != NULL);
897 ASSERT(lun_dip != NULL);
898 ASSERT(hba_tran != NULL);
899 ASSERT(sd != NULL);
900 ilp = (iscsi_lun_t *)hba_tran->tran_tgt_private;
901 ASSERT(ilp != NULL);
902
903 (void) mdi_prop_remove(ilp->lun_pip, NULL);
904 }
905
906 /*
907 * iscsi_start -- Start a SCSI transaction based on the packet
908 * This will attempt to add the icmdp to the pending queue
909 * for the connection and kick the queue. If the enqueue
910 * fails that means the queue is full.
911 */
912 static int
iscsi_tran_start(struct scsi_address * ap,struct scsi_pkt * pkt)913 iscsi_tran_start(struct scsi_address *ap, struct scsi_pkt *pkt)
914 {
915 iscsi_lun_t *ilp = NULL;
916 iscsi_sess_t *isp = NULL;
917 iscsi_cmd_t *icmdp = NULL;
918 uint_t flags;
919
920 ASSERT(ap != NULL);
921 ASSERT(pkt != NULL);
922 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private;
923 isp = (iscsi_sess_t *)ilp->lun_sess;
924 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private;
925 flags = pkt->pkt_flags;
926 ASSERT(ilp != NULL);
927 ASSERT(isp != NULL);
928 ASSERT(icmdp != NULL);
929
930 /*
931 * If the session is in the FREE state then
932 * all connections are down and retries have
933 * been exhausted. Fail command with fatal error.
934 */
935 rw_enter(&isp->sess_state_rwlock, RW_READER);
936 if (isp->sess_state == ISCSI_SESS_STATE_FREE) {
937 rw_exit(&isp->sess_state_rwlock);
938 return (TRAN_FATAL_ERROR);
939 }
940
941 /*
942 * If we haven't received data from the target in the
943 * max specified period something is wrong with the
944 * transport. Fail IO with FATAL_ERROR.
945 */
946 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_max_window) <
947 ddi_get_lbolt()) {
948 rw_exit(&isp->sess_state_rwlock);
949 return (TRAN_FATAL_ERROR);
950 }
951
952 /*
953 * If the session is not in LOGGED_IN then we have
954 * no connections LOGGED_IN, but we haven't exhuasted
955 * our retries. Fail the command with busy so the
956 * caller might try again later. Once retries are
957 * exhausted the state machine will move us to FREE.
958 */
959 if (isp->sess_state != ISCSI_SESS_STATE_LOGGED_IN) {
960 rw_exit(&isp->sess_state_rwlock);
961 return (TRAN_BUSY);
962 }
963
964 /*
965 * If we haven't received data from the target in the
966 * specified period something is probably wrong with
967 * the transport. Just return back BUSY until either
968 * the problem is resolved of the transport fails.
969 */
970 if (isp->sess_rx_lbolt + SEC_TO_TICK(iscsi_rx_window) <
971 ddi_get_lbolt()) {
972 rw_exit(&isp->sess_state_rwlock);
973 return (TRAN_BUSY);
974 }
975
976
977 /* reset cmd values in case upper level driver is retrying cmd */
978 icmdp->cmd_prev = icmdp->cmd_next = NULL;
979 icmdp->cmd_crc_error_seen = B_FALSE;
980 icmdp->cmd_lbolt_pending = icmdp->cmd_lbolt_active =
981 icmdp->cmd_lbolt_aborting = icmdp->cmd_lbolt_timeout =
982 (clock_t)NULL;
983 icmdp->cmd_itt = icmdp->cmd_ttt = 0;
984 icmdp->cmd_un.scsi.abort_icmdp = NULL;
985
986 mutex_enter(&isp->sess_queue_pending.mutex);
987 iscsi_cmd_state_machine(icmdp, ISCSI_CMD_EVENT_E1, isp);
988 mutex_exit(&isp->sess_queue_pending.mutex);
989 rw_exit(&isp->sess_state_rwlock);
990
991 /*
992 * If this packet doesn't have FLAG_NOINTR set, it could have
993 * already run to completion (and the memory freed) at this
994 * point, so check our local copy of pkt_flags. Otherwise we
995 * have to wait for completion before returning to the caller.
996 */
997 if (flags & FLAG_NOINTR) {
998 mutex_enter(&icmdp->cmd_mutex);
999 while ((icmdp->cmd_state != ISCSI_CMD_STATE_COMPLETED) ||
1000 (icmdp->cmd_un.scsi.r2t_icmdp != NULL) ||
1001 (icmdp->cmd_un.scsi.abort_icmdp != NULL) ||
1002 (icmdp->cmd_un.scsi.r2t_more == B_TRUE)) {
1003 cv_wait(&icmdp->cmd_completion, &icmdp->cmd_mutex);
1004 }
1005 icmdp->cmd_state = ISCSI_CMD_STATE_FREE;
1006 mutex_exit(&icmdp->cmd_mutex);
1007 }
1008
1009 return (TRAN_ACCEPT);
1010 }
1011
1012 /*
1013 * iscsi_tran_abort - Called when an upper level application
1014 * or driver wants to kill a scsi_pkt that was already sent to
1015 * this driver.
1016 */
1017 /* ARGSUSED */
1018 static int
iscsi_tran_abort(struct scsi_address * ap,struct scsi_pkt * pkt)1019 iscsi_tran_abort(struct scsi_address *ap, struct scsi_pkt *pkt)
1020 {
1021 return (0);
1022 }
1023
1024 /*
1025 * iscsi_tran_reset - Reset target at either BUS, TARGET, or LUN
1026 * level. This will require the issuing of a task management
1027 * command down to the target/lun.
1028 */
1029 static int
iscsi_tran_reset(struct scsi_address * ap,int level)1030 iscsi_tran_reset(struct scsi_address *ap, int level)
1031 {
1032 int rval = ISCSI_STATUS_INTERNAL_ERROR;
1033 iscsi_sess_t *isp = NULL;
1034 iscsi_lun_t *ilp = NULL;
1035
1036 ilp = (iscsi_lun_t *)ap->a_hba_tran->tran_tgt_private;
1037 ASSERT(ilp != NULL);
1038 isp = ilp->lun_sess;
1039 ASSERT(isp != NULL);
1040
1041 switch (level) {
1042 case RESET_LUN:
1043 /* reset attempt will block until attempt is complete */
1044 rval = iscsi_handle_reset(isp, level, ilp);
1045 break;
1046 case RESET_BUS:
1047 /*
1048 * What are we going to realy reset the ethernet
1049 * network!? Just fall through to a target reset.
1050 */
1051 case RESET_TARGET:
1052 /* reset attempt will block until attempt is complete */
1053 rval = iscsi_handle_reset(isp, level, NULL);
1054 break;
1055 case RESET_ALL:
1056 default:
1057 break;
1058 }
1059
1060 return (ISCSI_SUCCESS(rval) ? 1 : 0);
1061 }
1062
1063 /*
1064 * iscsi_tran_getcap - Get target/lun capabilities.
1065 */
1066 static int
iscsi_tran_getcap(struct scsi_address * ap,char * cap,int whom)1067 iscsi_tran_getcap(struct scsi_address *ap, char *cap, int whom)
1068 {
1069 return (iscsi_i_commoncap(ap, cap, 0, whom, 0));
1070 }
1071
1072
1073 /*
1074 * iscsi_tran_setcap - Set target/lun capabilities.
1075 */
1076 /* ARGSUSED */
1077 static int
iscsi_tran_setcap(struct scsi_address * ap,char * cap,int value,int whom)1078 iscsi_tran_setcap(struct scsi_address *ap, char *cap, int value, int whom)
1079 {
1080 return (iscsi_i_commoncap(ap, cap, value, whom, 1));
1081 }
1082
1083
1084 /*
1085 * iscsi_tran_destroy_pkt - Clean up packet
1086 */
1087 static void
iscsi_tran_destroy_pkt(struct scsi_address * ap,struct scsi_pkt * pkt)1088 iscsi_tran_destroy_pkt(struct scsi_address *ap, struct scsi_pkt *pkt)
1089 {
1090 iscsi_cmd_t *icmdp;
1091
1092 icmdp = (iscsi_cmd_t *)pkt->pkt_ha_private;
1093
1094 ASSERT(icmdp != NULL);
1095 ASSERT(icmdp->cmd_sig == ISCSI_SIG_CMD);
1096 ASSERT(icmdp->cmd_state == ISCSI_CMD_STATE_FREE);
1097
1098 mutex_destroy(&icmdp->cmd_mutex);
1099 cv_destroy(&icmdp->cmd_completion);
1100 scsi_hba_pkt_free(ap, pkt);
1101 }
1102
1103 /*
1104 * iscsi_tran_dmafree - This is a software driver, NO DMA
1105 */
1106 /* ARGSUSED */
1107 static void
iscsi_tran_dmafree(struct scsi_address * ap,struct scsi_pkt * pkt)1108 iscsi_tran_dmafree(struct scsi_address *ap, struct scsi_pkt *pkt)
1109 {
1110 /*
1111 * The iSCSI interface doesn't deal with DMA
1112 */
1113 }
1114
1115 /*
1116 * iscsi_tran_sync_pkt - This is a software driver, NO DMA
1117 */
1118 /* ARGSUSED */
1119 static void
iscsi_tran_sync_pkt(struct scsi_address * ap,struct scsi_pkt * pkt)1120 iscsi_tran_sync_pkt(struct scsi_address *ap, struct scsi_pkt *pkt)
1121 {
1122 /*
1123 * The iSCSI interface doesn't deal with DMA
1124 */
1125 }
1126
1127 /*
1128 * iscsi_tran_reset_notify - We don't support BUS_RESET so there
1129 * is no point in support callback.
1130 */
1131 /* ARGSUSED */
1132 static int
iscsi_tran_reset_notify(struct scsi_address * ap,int flag,void (* callback)(caddr_t),caddr_t arg)1133 iscsi_tran_reset_notify(struct scsi_address *ap, int flag,
1134 void (*callback) (caddr_t), caddr_t arg)
1135 {
1136
1137 /*
1138 * We never do BUS_RESETS so allowing this call
1139 * back to register has no point?
1140 */
1141 return (DDI_SUCCESS);
1142 }
1143
1144
1145 /*
1146 * iscsi_tran_bus_config - on demand device configuration
1147 *
1148 * iscsi_tran_bus_config is called by the NDI layer at the completion
1149 * of a dev_node creation. There are two primary cases defined in this
1150 * function. The first is BUS_CONFIG_ALL. In this case the NDI is trying
1151 * to identify that targets/luns are available configured at that point
1152 * in time. It is safe to just complete the process succcessfully. The
1153 * second case is a new case that was defined in S10 for devfs. BUS_CONFIG_ONE
1154 * this is to help driver the top down discovery instead of bottom up. If
1155 * we receive a BUS_CONFIG_ONE we should check to see if the <addr> exists
1156 * if so complete successfull processing. Otherwise we should call the
1157 * deamon and see if we can plumb the <addr>. If it is possible to plumb the
1158 * <addr> block until plumbing is complete. In both cases of being able to
1159 * plumb <addr> or not continue with successfull processing.
1160 */
1161 static int
iscsi_tran_bus_config(dev_info_t * parent,uint_t flags,ddi_bus_config_op_t op,void * arg,dev_info_t ** childp)1162 iscsi_tran_bus_config(dev_info_t *parent, uint_t flags,
1163 ddi_bus_config_op_t op, void *arg, dev_info_t **childp)
1164 {
1165 int rval = NDI_SUCCESS;
1166 iscsi_hba_t *ihp = NULL;
1167 int iflags = flags;
1168 char *name = NULL;
1169 char *ptr = NULL;
1170 boolean_t config_root = B_FALSE;
1171
1172 /* get reference to soft state */
1173 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state,
1174 ddi_get_instance(parent));
1175 if (ihp == NULL) {
1176 return (NDI_FAILURE);
1177 }
1178
1179 iscsi_check_miniroot(ihp);
1180 if ((modrootloaded == 0) && (iscsiboot_prop != NULL)) {
1181 config_root = B_TRUE;
1182 }
1183
1184 if (config_root == B_FALSE) {
1185 if (iscsi_client_request_service(ihp) == B_FALSE) {
1186 return (NDI_FAILURE);
1187 }
1188 }
1189
1190 /* lock so only one config operation occrs */
1191 sema_p(&iscsid_config_semaphore);
1192
1193 switch (op) {
1194 case BUS_CONFIG_ONE:
1195 /* parse target name out of name given */
1196 if ((ptr = strchr((char *)arg, '@')) == NULL) {
1197 rval = NDI_FAILURE;
1198 break;
1199 }
1200 ptr++; /* move past '@' */
1201 name = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP);
1202 (void) strncpy(name, ptr, MAX_GET_NAME_SIZE);
1203 /* We need to strip the LUN */
1204 if ((ptr = strchr(name, ',')) == NULL) {
1205 rval = NDI_FAILURE;
1206 kmem_free(name, MAX_GET_NAME_SIZE);
1207 name = NULL;
1208 break;
1209 }
1210 /* We also need to strip the 4 bytes of hex TPGT */
1211 ptr -= 4;
1212 if (ptr <= name) {
1213 rval = NDI_FAILURE;
1214 kmem_free(name, MAX_GET_NAME_SIZE);
1215 name = NULL;
1216 break;
1217 }
1218 *ptr = '\0'; /* NULL terminate */
1219
1220 /* translate name back to original iSCSI name */
1221 iscsi_get_name_to_iqn(name, MAX_GET_NAME_SIZE);
1222
1223 /* configure target, skip 4 byte ISID */
1224 iscsid_config_one(ihp, (name+4), B_TRUE);
1225
1226 kmem_free(name, MAX_GET_NAME_SIZE);
1227 name = NULL;
1228
1229 /*
1230 * DDI group instructed us to use this flag.
1231 */
1232 iflags |= NDI_MDI_FALLBACK;
1233 break;
1234 case BUS_CONFIG_DRIVER:
1235 /* FALLTHRU */
1236 case BUS_CONFIG_ALL:
1237 iscsid_config_all(ihp, B_TRUE);
1238 break;
1239 default:
1240 rval = NDI_FAILURE;
1241 break;
1242 }
1243
1244 if (rval == NDI_SUCCESS) {
1245 rval = ndi_busop_bus_config(parent, iflags,
1246 op, arg, childp, 0);
1247 }
1248 sema_v(&iscsid_config_semaphore);
1249
1250 if (config_root == B_FALSE) {
1251 iscsi_client_release_service(ihp);
1252 }
1253
1254 return (rval);
1255 }
1256
1257 /*
1258 * iscsi_tran_bus_unconfig - on demand device unconfiguration
1259 *
1260 * Called by the os framework under low resource situations.
1261 * It will attempt to unload our minor nodes (logical units
1262 * ndi/mdi nodes).
1263 */
1264 static int
iscsi_tran_bus_unconfig(dev_info_t * parent,uint_t flag,ddi_bus_config_op_t op,void * arg)1265 iscsi_tran_bus_unconfig(dev_info_t *parent, uint_t flag,
1266 ddi_bus_config_op_t op, void *arg)
1267 {
1268 int rval = NDI_SUCCESS;
1269 iscsi_hba_t *ihp = NULL;
1270
1271 /* get reference to soft state */
1272 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state,
1273 ddi_get_instance(parent));
1274 if (ihp == NULL) {
1275 return (NDI_FAILURE);
1276 }
1277
1278 if (iscsi_client_request_service(ihp) == B_FALSE) {
1279 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
1280 if (ihp->hba_sess_list != NULL) {
1281 rval = NDI_FAILURE;
1282 }
1283 rw_exit(&ihp->hba_sess_list_rwlock);
1284 return (rval);
1285 }
1286
1287 rval = ndi_busop_bus_unconfig(parent, flag, op, arg);
1288
1289 iscsi_client_release_service(ihp);
1290
1291 return (rval);
1292 }
1293
1294
1295 /*
1296 * iscsi_tran_get_name - create private /devices name for LUN
1297 *
1298 * This creates the <addr> in /devices/iscsi/<driver>@<addr>
1299 * path. For this <addr> we return the <session/target_name>,<lun num>
1300 * Where <target_name> is an <iqn/eui/...> as defined by the iSCSI
1301 * specification. We do modify the name slightly so that it still
1302 * complies with the IEEE <addr> naming scheme. This means that we
1303 * will substitute out the ':', '@', ... and other reserved characters
1304 * defined in the IEEE definition with '%<hex value of special char>'
1305 * This routine is indirectly called by iscsi_lun_create_xxx. These
1306 * calling routines must prevent the session and lun lists from changing
1307 * during this routine.
1308 */
1309 static int
iscsi_tran_get_name(struct scsi_device * sd,char * name,int len)1310 iscsi_tran_get_name(struct scsi_device *sd, char *name, int len)
1311 {
1312 int target = 0;
1313 int lun = 0;
1314 iscsi_hba_t *ihp = NULL;
1315 iscsi_sess_t *isp = NULL;
1316 iscsi_lun_t *ilp = NULL;
1317 dev_info_t *lun_dip = NULL;
1318
1319 ASSERT(sd != NULL);
1320 ASSERT(name != NULL);
1321 lun_dip = sd->sd_dev;
1322 ASSERT(lun_dip != NULL);
1323
1324 /* get reference to soft state */
1325 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state,
1326 ddi_get_instance(ddi_get_parent(lun_dip)));
1327 if (ihp == NULL) {
1328 name[0] = '\0';
1329 return (0);
1330 }
1331
1332 /* Get the target num */
1333 target = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev,
1334 DDI_PROP_DONTPASS, TARGET_PROP, 0);
1335
1336 /* Get the target num */
1337 lun = ddi_prop_get_int(DDI_DEV_T_ANY, sd->sd_dev,
1338 DDI_PROP_DONTPASS, LUN_PROP, 0);
1339
1340 /*
1341 * Now we need to find our ilp by walking the lists
1342 * off the ihp and isp.
1343 */
1344 /* See if we already created this session */
1345
1346 /* Walk the HBA's session list */
1347 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) {
1348 /* compare target name as the unique identifier */
1349 if (target == isp->sess_oid) {
1350 /* found match */
1351 break;
1352 }
1353 }
1354
1355 /* If we found matching session continue searching for tgt */
1356 if (isp == NULL) {
1357 /* sess not found */
1358 name[0] = '\0';
1359 return (0);
1360 }
1361
1362 /*
1363 * Search for the matching iscsi lun structure. We don't
1364 * need to hold the READER for the lun list at this point.
1365 * because the tran_get_name is being called from the online
1366 * function which is already holding a reader on the lun
1367 * list.
1368 */
1369 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) {
1370 if (lun == ilp->lun_num) {
1371 /* found match */
1372 break;
1373 }
1374 }
1375
1376 if (ilp == NULL) {
1377 /* tgt not found */
1378 name[0] = '\0';
1379 return (0);
1380 }
1381
1382 /* Ensure enough space for lun_addr is available */
1383 ASSERT(ilp->lun_addr != NULL);
1384 if ((strlen(ilp->lun_addr) + 1) > len) {
1385 return (0);
1386 }
1387
1388 /* copy lun_addr name */
1389 (void) strcpy(name, ilp->lun_addr);
1390
1391 /*
1392 * Based on IEEE-1275 we can't have any ':', ' ', '@', or '/'
1393 * characters in our naming. So replace all those characters
1394 * with '-'
1395 */
1396 iscsi_get_name_from_iqn(name, len);
1397
1398 return (1);
1399 }
1400
1401 /*
1402 * iscsi_tran_get_bus_addr - This returns a human readable string
1403 * for the bus address. Examining most other drivers fcp, etc. They
1404 * all just return the same string as tran_get_name. In our case
1405 * our tran get name is already some what usable so leave alone.
1406 */
1407 static int
iscsi_tran_get_bus_addr(struct scsi_device * sd,char * name,int len)1408 iscsi_tran_get_bus_addr(struct scsi_device *sd, char *name, int len)
1409 {
1410 return (iscsi_tran_get_name(sd, name, len));
1411 }
1412
1413
1414 /*
1415 * +--------------------------------------------------------------------+
1416 * | End of scsi_tran routines |
1417 * +--------------------------------------------------------------------+
1418 */
1419
1420 /*
1421 * +--------------------------------------------------------------------+
1422 * | Start of cb_ops routines |
1423 * +--------------------------------------------------------------------+
1424 */
1425
1426 /*
1427 * iscsi_open - Driver should be made IOCTL MT safe. Otherwise
1428 * this function needs updated.
1429 */
1430 /* ARGSUSED */
1431 static int
iscsi_open(dev_t * devp,int flags,int otyp,cred_t * credp)1432 iscsi_open(dev_t *devp, int flags, int otyp, cred_t *credp)
1433 {
1434 return (0);
1435 }
1436
1437 /*
1438 * iscsi_close -
1439 */
1440 /* ARGSUSED */
1441 static int
iscsi_close(dev_t dev,int flags,int otyp,cred_t * credp)1442 iscsi_close(dev_t dev, int flags, int otyp, cred_t *credp)
1443 {
1444 return (0);
1445 }
1446
1447 /*
1448 * iscsi_ioctl -
1449 */
1450 /* ARGSUSED */
1451 static int
iscsi_ioctl(dev_t dev,int cmd,intptr_t arg,int mode,cred_t * credp,int * rvalp)1452 iscsi_ioctl(dev_t dev, int cmd, intptr_t arg, int mode,
1453 cred_t *credp, int *rvalp)
1454 {
1455 int rtn = 0;
1456 int instance = 0;
1457 int list_space = 0;
1458 int lun_sz = 0;
1459 int did;
1460 int retry;
1461 iscsi_hba_t *ihp = NULL;
1462 iscsi_sess_t *isp = NULL;
1463 iscsi_conn_t *icp = NULL;
1464 iscsi_login_params_t *params = NULL;
1465 iscsi_login_params_t *tmpParams = NULL;
1466 uchar_t *name = NULL;
1467 dev_info_t *lun_dip = NULL;
1468
1469 entry_t e;
1470 iscsi_oid_t oid;
1471 iscsi_property_t *ipp;
1472 iscsi_static_property_t *ispp;
1473 iscsi_param_get_t *ilg;
1474 iscsi_param_set_t *ils;
1475 iscsi_target_list_t idl, *idlp = NULL;
1476 iscsi_addr_list_t ial, *ialp = NULL;
1477 iscsi_chap_props_t *chap = NULL;
1478 iscsi_radius_props_t *radius = NULL;
1479 iscsi_auth_props_t *auth = NULL;
1480 iscsi_lun_list_t *ll, *llp = NULL;
1481 iscsi_lun_props_t *lun = NULL;
1482 iscsi_lun_t *ilp = NULL;
1483 iSCSIDiscoveryMethod_t method;
1484 iSCSIDiscoveryProperties_t discovery_props;
1485 iscsi_uscsi_t iu;
1486 iscsi_uscsi_t iu_caller;
1487 #ifdef _MULTI_DATAMODEL
1488 /* For use when a 32 bit app makes a call into a 64 bit ioctl */
1489 iscsi_uscsi32_t iu32_caller;
1490 model_t model;
1491 #endif /* _MULTI_DATAMODEL */
1492 void *void_p;
1493 iscsi_sendtgts_list_t *stl_hdr;
1494 iscsi_sendtgts_list_t *istl;
1495 int stl_sz;
1496 iscsi_target_entry_t *target;
1497 uint32_t old_oid;
1498 uint32_t target_oid;
1499 iscsi_targetparam_entry_t *curr_entry;
1500 char *initiator_node_name;
1501 char *initiator_node_alias;
1502 isns_portal_group_list_t *pg_list = NULL;
1503 isns_server_portal_group_list_t *server_pg_list_hdr = NULL;
1504 isns_server_portal_group_list_t *server_pg_list = NULL;
1505 int pg_list_sz, pg_sz_copy_out, server_pg_list_sz;
1506 iscsi_config_sess_t *ics;
1507 int size;
1508 boolean_t rval;
1509 char init_port_name[MAX_NAME_PROP_SIZE];
1510 iscsi_sockaddr_t addr_dsc;
1511 iscsi_boot_property_t *bootProp;
1512 boolean_t discovered = B_TRUE;
1513 iscsi_tunable_object_t *tpsg;
1514 iscsi_tunable_object_t *tpss;
1515 iscsi_reen_t *reenum;
1516
1517 instance = getminor(dev);
1518 ihp = (iscsi_hba_t *)ddi_get_soft_state(iscsi_state, instance);
1519 if (ihp == NULL)
1520 return (EFAULT);
1521
1522 iscsi_check_miniroot(ihp);
1523 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) &&
1524 (cmd != ISCSI_SMF_GET)) {
1525 /* other cmd needs to acquire the service */
1526 if (iscsi_client_request_service(ihp) == B_FALSE) {
1527 return (EFAULT);
1528 }
1529 }
1530
1531 switch (cmd) {
1532 /*
1533 * ISCSI_CREATE_OID - Create a Object IDentifier for a TargetName
1534 */
1535 case ISCSI_CREATE_OID:
1536 if (ddi_copyin((caddr_t)arg, &oid, sizeof (oid), mode)) {
1537 rtn = EFAULT;
1538 break;
1539 }
1540 if (oid.o_vers != ISCSI_INTERFACE_VERSION) {
1541 rtn = EINVAL;
1542 break;
1543 }
1544
1545 /* Set the target that this session is associated with */
1546 oid.o_oid = iscsi_targetparam_get_oid(oid.o_name);
1547
1548 if (ddi_copyout(&oid, (caddr_t)arg, sizeof (oid), mode)) {
1549 rtn = EFAULT;
1550 break;
1551 }
1552 break;
1553 /*
1554 * ISCSI_PARAM_GET - Get param for specified
1555 * connection/session.
1556 */
1557 case ISCSI_PARAM_GET:
1558 /* copyin user args */
1559 ilg = (iscsi_param_get_t *)kmem_alloc(sizeof (*ilg), KM_SLEEP);
1560 if (ddi_copyin((caddr_t)arg, ilg, sizeof (*ilg), mode)) {
1561 rtn = EFAULT;
1562 kmem_free(ilg, sizeof (*ilg));
1563 break;
1564 }
1565
1566 if (ilg->g_vers != ISCSI_INTERFACE_VERSION) {
1567 rtn = EINVAL;
1568 kmem_free(ilg, sizeof (*ilg));
1569 break;
1570 }
1571
1572 /* handle special case for Initiator name */
1573 if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_NAME) {
1574 (void) strlcpy((char *)ilg->g_value.v_name,
1575 (char *)ihp->hba_name, ISCSI_MAX_NAME_LEN);
1576 } else if (ilg->g_param == ISCSI_LOGIN_PARAM_INITIATOR_ALIAS) {
1577 if (ihp->hba_alias_length == 0) {
1578 rtn = EINVAL;
1579 } else {
1580 (void) strlcpy((char *)ilg->g_value.v_name,
1581 (char *)ihp->hba_alias, ISCSI_MAX_NAME_LEN);
1582 }
1583 } else {
1584 /* To describe the validity of the requested param */
1585 boolean_t valid_flag = B_TRUE;
1586
1587 name = NULL;
1588
1589 /*
1590 * switch login based if looking for initiator
1591 * params
1592 */
1593 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
1594 if (ilg->g_oid == ihp->hba_oid) {
1595 /* initiator */
1596 params = &ihp->hba_params;
1597 name = ihp->hba_name;
1598 if (iscsi_get_persisted_param(name,
1599 ilg, params) != 0) {
1600 valid_flag = B_FALSE;
1601 }
1602 } else {
1603 /*
1604 * If the oid does represent a session check
1605 * to see if it is a target oid. If so,
1606 * return the target's associated session.
1607 */
1608 rtn = iscsi_sess_get(ilg->g_oid, ihp, &isp);
1609 if (rtn != 0) {
1610 rtn = iscsi_sess_get_by_target(
1611 ilg->g_oid, ihp, &isp);
1612 }
1613
1614 /*
1615 * If rtn is zero then we have found an
1616 * existing session. Use the session name to
1617 * do param lookup. If rtn is non-zero then
1618 * create a targetparam object and use its name
1619 * for param lookup.
1620 */
1621 if (rtn == 0) {
1622 name = isp->sess_name;
1623 params = &isp->sess_params;
1624 } else {
1625 name =
1626 iscsi_targetparam_get_name(
1627 ilg->g_oid);
1628 if (ilg->g_param_type ==
1629 ISCSI_SESS_PARAM) {
1630 tmpParams =
1631 (iscsi_login_params_t *)
1632 kmem_alloc(
1633 sizeof (*tmpParams),
1634 KM_SLEEP);
1635 params = tmpParams;
1636 }
1637 rtn = 0;
1638 }
1639
1640 if (name == NULL) {
1641 rw_exit(
1642 &ihp->hba_sess_list_rwlock);
1643 rtn = EFAULT;
1644 kmem_free(ilg, sizeof (*ilg));
1645 if (tmpParams != NULL)
1646 kmem_free(tmpParams,
1647 sizeof (*tmpParams));
1648
1649 break;
1650 }
1651
1652 if (ilg->g_param_type == ISCSI_SESS_PARAM) {
1653 /* session */
1654 /*
1655 * Update sess_params with the
1656 * latest params from the
1657 * persistent store.
1658 */
1659 if (iscsi_get_persisted_param(name,
1660 ilg, params) != 0) {
1661 /*
1662 * If the parameter in
1663 * question is not
1664 * overriden, no effect
1665 * on existing session
1666 * parameters. However,
1667 * the parameter is
1668 * marked invalid
1669 * (from the standpoint
1670 * of whether it is
1671 * overriden).
1672 */
1673 valid_flag = B_FALSE;
1674 }
1675 } else if (ilg->g_param_type ==
1676 ISCSI_CONN_PARAM && isp != NULL) {
1677 /* connection */
1678 rw_enter(&isp->sess_conn_list_rwlock,
1679 RW_READER);
1680 /* Assuming 1 conn per sess. */
1681 /*
1682 * MC/S - Need to be modified to
1683 * take g_conn_cid into account when
1684 * we go multi-connection.
1685 */
1686 if ((isp->sess_conn_act != NULL) &&
1687 (isp->sess_conn_act->conn_state ==
1688 ISCSI_CONN_STATE_LOGGED_IN)) {
1689 params = &(isp->
1690 sess_conn_act->
1691 conn_params);
1692 } else {
1693 valid_flag = B_FALSE;
1694 }
1695 rw_exit(&isp->sess_conn_list_rwlock);
1696 }
1697 }
1698
1699 /* make sure we have params to get info from */
1700 if (params) {
1701 rtn = iscsi_get_param(params, valid_flag, ilg);
1702
1703 /*
1704 * for target parameters, check if any
1705 * parameters were overridden at the initiator
1706 * level. If so, then change the default value
1707 * to the initiator's overridden value
1708 */
1709 if ((rtn == 0) &&
1710 (ilg->g_oid != ihp->hba_oid)) {
1711 iscsi_override_target_default(ihp,
1712 ilg);
1713 }
1714 }
1715 rw_exit(&ihp->hba_sess_list_rwlock);
1716 }
1717
1718 if (rtn == 0) {
1719 rtn = ddi_copyout(ilg, (caddr_t)arg,
1720 sizeof (iscsi_param_get_t), mode);
1721 }
1722 kmem_free(ilg, sizeof (*ilg));
1723 if (tmpParams != NULL)
1724 kmem_free(tmpParams, sizeof (*tmpParams));
1725 break;
1726
1727 /*
1728 * ISCSI_INIT_NODE_NAME_SET - Change the initiator-node name for
1729 * the specified connection/session.
1730 */
1731 case ISCSI_INIT_NODE_NAME_SET:
1732 /* copyin user args */
1733 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP);
1734 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) {
1735 rtn = EFAULT;
1736 kmem_free(ils, sizeof (*ils));
1737 break;
1738 }
1739
1740 if (ils->s_vers != ISCSI_INTERFACE_VERSION) {
1741 rtn = EINVAL;
1742 kmem_free(ils, sizeof (*ils));
1743 break;
1744 }
1745
1746 /* saving off the old initiator-node name */
1747 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
1748 rval = persistent_initiator_name_get(initiator_node_name,
1749 ISCSI_MAX_NAME_LEN);
1750
1751 rtn = iscsi_set_params(ils, ihp, B_TRUE);
1752 kmem_free(ils, sizeof (*ils));
1753 if (rtn != 0) {
1754 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
1755 initiator_node_name = NULL;
1756 break;
1757 }
1758
1759 (void) snprintf(init_port_name, MAX_NAME_PROP_SIZE,
1760 "%s,%02x%02x%02x%02x%02x%02x",
1761 (char *)ihp->hba_name, ihp->hba_isid[0],
1762 ihp->hba_isid[1], ihp->hba_isid[2],
1763 ihp->hba_isid[3], ihp->hba_isid[4],
1764 ihp->hba_isid[5]);
1765
1766 if (ddi_prop_update_string(DDI_DEV_T_NONE,
1767 ihp->hba_dip, SCSI_ADDR_PROP_INITIATOR_PORT,
1768 init_port_name) != DDI_PROP_SUCCESS) {
1769 cmn_err(CE_WARN, "iscsi_ioctl: Updating "
1770 SCSI_ADDR_PROP_INITIATOR_PORT " property on iSCSI "
1771 "HBA(%s) with dip(%d) Failed",
1772 (char *)ihp->hba_name,
1773 ddi_get_instance(ihp->hba_dip));
1774 }
1775
1776 /*
1777 * Deregister the old initiator-node name from the iSNS
1778 * server
1779 * Register the new initiator-node name with the iSNS server
1780 */
1781 method = persistent_disc_meth_get();
1782 if (method & iSCSIDiscoveryMethodISNS) {
1783 if (rval == B_TRUE) {
1784 if (strlen(initiator_node_name) > 0) {
1785 /*
1786 * we will attempt to offline the targets.
1787 * if logouts fail, we will still continue
1788 */
1789 #define STRING_INNO "initiator-node name - Offline "
1790 #define STRING_FFOMD "failed for one or more devices"
1791 if ((iscsid_del(
1792 ihp, NULL, method, NULL))
1793 != B_TRUE) {
1794 cmn_err(CE_NOTE,
1795 "Attempting to change "
1796 STRING_INNO
1797 STRING_FFOMD);
1798 }
1799 (void) isns_dereg(ihp->hba_isid,
1800 (uint8_t *)initiator_node_name);
1801 #undef STRING_INNO
1802 #undef STRING_FFOMD
1803 }
1804 }
1805 if (persistent_initiator_name_get(initiator_node_name,
1806 ISCSI_MAX_NAME_LEN) != B_TRUE) {
1807 kmem_free(initiator_node_name,
1808 ISCSI_MAX_NAME_LEN);
1809 initiator_node_name = NULL;
1810 rtn = EIO;
1811 break;
1812 }
1813 if (strlen(initiator_node_name) == 0) {
1814 kmem_free(initiator_node_name,
1815 ISCSI_MAX_NAME_LEN);
1816 initiator_node_name = NULL;
1817 rtn = EIO;
1818 break;
1819 }
1820
1821 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN,
1822 KM_SLEEP);
1823 if (persistent_alias_name_get(initiator_node_alias,
1824 ISCSI_MAX_NAME_LEN) != B_TRUE) {
1825 initiator_node_alias[0] = '\0';
1826 }
1827
1828 (void) isns_reg(ihp->hba_isid,
1829 (uint8_t *)initiator_node_name,
1830 ISCSI_MAX_NAME_LEN,
1831 (uint8_t *)initiator_node_alias,
1832 ISCSI_MAX_NAME_LEN,
1833 ISNS_INITIATOR_NODE_TYPE,
1834 isns_scn_callback);
1835 iscsid_do_isns_query(ihp);
1836
1837 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN);
1838 initiator_node_alias = NULL;
1839 }
1840
1841 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
1842 initiator_node_name = NULL;
1843 break;
1844
1845 /*
1846 * ISCSI_PARAM_SET - Set param for specified connection/session.
1847 */
1848 case ISCSI_PARAM_SET:
1849 /* copyin user args */
1850 ils = (iscsi_param_set_t *)kmem_alloc(sizeof (*ils), KM_SLEEP);
1851 if (ddi_copyin((caddr_t)arg, ils, sizeof (*ils), mode)) {
1852 rtn = EFAULT;
1853 kmem_free(ils, sizeof (*ils));
1854 break;
1855 }
1856
1857 if (ils->s_vers != ISCSI_INTERFACE_VERSION) {
1858 rtn = EINVAL;
1859 kmem_free(ils, sizeof (*ils));
1860 break;
1861 }
1862 rtn = iscsi_set_params(ils, ihp, B_TRUE);
1863 if (iscsiboot_prop) {
1864 if (iscsi_cmp_boot_sess_oid(ihp, ils->s_oid)) {
1865 /*
1866 * found active session for this object
1867 * or this is initiator's object
1868 * with mpxio enabled
1869 */
1870 if (!iscsi_reconfig_boot_sess(ihp)) {
1871 rtn = EINVAL;
1872 kmem_free(ils, sizeof (*ils));
1873 break;
1874 }
1875 }
1876 }
1877 kmem_free(ils, sizeof (*ils));
1878 break;
1879
1880 /*
1881 * ISCSI_TARGET_PARAM_CLEAR
1882 * - remove custom parameter settings for a target.
1883 */
1884 case ISCSI_TARGET_PARAM_CLEAR:
1885 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
1886 rtn = EFAULT;
1887 break;
1888 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
1889 rtn = EINVAL;
1890 break;
1891 }
1892
1893 if ((e.e_oid != ihp->hba_oid) &&
1894 (e.e_oid != ISCSI_OID_NOTSET)) {
1895 boolean_t rval1, rval2, rval3;
1896 uchar_t *t_name;
1897 iscsi_sess_t *t_isp;
1898 boolean_t t_rtn = B_TRUE;
1899 persistent_param_t t_param;
1900 iscsi_config_sess_t t_ics;
1901 persistent_tunable_param_t t_tpsg;
1902
1903 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
1904 /*
1905 * If the oid does represent a session check to see
1906 * if it is a target oid. If so, return the target's
1907 * associated session.
1908 */
1909 rtn = iscsi_sess_get(e.e_oid, ihp, &isp);
1910 if (rtn != 0) {
1911 rtn = iscsi_sess_get_by_target(e.e_oid, ihp,
1912 &isp);
1913 }
1914
1915 /*
1916 * If rtn is zero then we have found an
1917 * existing session. Use the session name to
1918 * do param lookup. If rtn is non-zero then
1919 * create a targetparam object and use its name
1920 * for param lookup.
1921 */
1922 if (rtn == 0) {
1923 t_name = isp->sess_name;
1924 } else {
1925 t_name = iscsi_targetparam_get_name(e.e_oid);
1926 rtn = 0;
1927 }
1928
1929 if (t_name == NULL) {
1930 rw_exit(&ihp->hba_sess_list_rwlock);
1931 rtn = EFAULT;
1932 break;
1933 }
1934
1935 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
1936 (void) strncpy((char *)name, (char *)t_name,
1937 ISCSI_MAX_NAME_LEN);
1938
1939 t_ics.ics_in = 1;
1940 rval1 = persistent_param_get((char *)name, &t_param);
1941 rval2 = persistent_get_config_session((char *)name,
1942 &t_ics);
1943 rval3 = persistent_get_tunable_param((char *)name,
1944 &t_tpsg);
1945
1946 if ((rval1 == B_FALSE) && (rval2 == B_FALSE) &&
1947 (rval3 == B_FALSE)) {
1948 /* no any target parameters get */
1949 kmem_free(name, ISCSI_MAX_NAME_LEN);
1950 rw_exit(&ihp->hba_sess_list_rwlock);
1951 rtn = EIO;
1952 break;
1953 }
1954
1955 if (persistent_param_clear((char *)name) == B_FALSE) {
1956 kmem_free(name, ISCSI_MAX_NAME_LEN);
1957 rw_exit(&ihp->hba_sess_list_rwlock);
1958 rtn = EIO;
1959 break;
1960 }
1961
1962 ics = kmem_zalloc(sizeof (*ics), KM_SLEEP);
1963 ics->ics_ver = ISCSI_INTERFACE_VERSION;
1964 ics->ics_oid = ISCSI_INITIATOR_OID;
1965 ics->ics_in = 1;
1966
1967 /*
1968 * We may have multiple sessions with different
1969 * tpgt values. So we need to loop through
1970 * the sessions and update all sessions.
1971 */
1972 for (isp = ihp->hba_sess_list; isp;
1973 isp = t_isp) {
1974 t_isp = isp->sess_next;
1975
1976 if (strncmp((char *)isp->sess_name,
1977 (char *)name, ISCSI_MAX_NAME_LEN) == 0) {
1978 /*
1979 * When removing target-params we need
1980 * slightly different actions depending
1981 * on if the session should still exist.
1982 * Get the initiator-node value for
1983 * MS/T. If there is no initiator
1984 * value then assume the default value
1985 * of 1. If the initiator value is
1986 * less than this ISID then we need to
1987 * destroy the session. Otherwise
1988 * update the session information and
1989 * resync (N7 event).
1990 */
1991 rtn = iscsi_ioctl_get_config_sess(
1992 ihp, ics);
1993 if (((rtn != 0) &&
1994 (isp->sess_isid[5] > 0)) ||
1995 ((rtn == 0) &&
1996 (ics->ics_out <=
1997 isp->sess_isid[5]))) {
1998
1999 /*
2000 * This session should no
2001 * longer exist. Remove
2002 * session.
2003 */
2004 if (!ISCSI_SUCCESS(
2005 iscsi_sess_destroy(isp))) {
2006 t_rtn = B_FALSE;
2007 continue;
2008 }
2009 isp = ihp->hba_sess_list;
2010 } else {
2011 uint32_t event_count;
2012 /*
2013 * Reset the session
2014 * parameters.
2015 */
2016 bcopy(&(isp->sess_hba->
2017 hba_params),
2018 &(isp->sess_params),
2019 sizeof (isp->sess_params));
2020 if (iscsiboot_prop &&
2021 isp->sess_boot) {
2022 /*
2023 * reconfig boot
2024 * session later
2025 */
2026 continue;
2027 }
2028 /*
2029 * Notify the session that the
2030 * login parameters have
2031 * changed.
2032 */
2033 event_count = atomic_inc_32_nv(
2034 &isp->
2035 sess_state_event_count);
2036 iscsi_sess_enter_state_zone(
2037 isp);
2038
2039 iscsi_sess_state_machine(isp,
2040 ISCSI_SESS_EVENT_N7,
2041 event_count);
2042
2043 iscsi_sess_exit_state_zone(
2044 isp);
2045 }
2046 }
2047 }
2048 if (t_rtn == B_FALSE) {
2049 boolean_t t_rval = B_TRUE;
2050 /* Failure!, restore target's parameters */
2051 if (rval1 == B_TRUE) {
2052 rval1 = persistent_param_set(
2053 (char *)name, &t_param);
2054 if (rval1 == B_FALSE) {
2055 t_rval = B_FALSE;
2056 }
2057 }
2058 if (rval2 == B_TRUE) {
2059 rval2 = persistent_set_config_session(
2060 (char *)name, &t_ics);
2061 if (rval2 == B_FALSE) {
2062 t_rval = B_FALSE;
2063 }
2064 }
2065 if (rval3 == B_TRUE) {
2066 rval3 = persistent_set_tunable_param(
2067 (char *)name, &t_tpsg);
2068 if (rval3 == B_FALSE) {
2069 t_rval = B_FALSE;
2070 }
2071 }
2072 if (t_rval == B_FALSE) {
2073 cmn_err(CE_WARN, "Failed to restore "
2074 "target's parameters after remove "
2075 "session related to target "
2076 "parameters failure.");
2077 }
2078 rtn = EBUSY;
2079 }
2080 kmem_free(ics, sizeof (*ics));
2081 kmem_free(name, ISCSI_MAX_NAME_LEN);
2082 rw_exit(&ihp->hba_sess_list_rwlock);
2083 if (iscsiboot_prop) {
2084 if (iscsi_cmp_boot_sess_oid(ihp, e.e_oid)) {
2085 /*
2086 * found active session for this object
2087 * or this is initiator object
2088 * with mpxio enabled
2089 */
2090 if (!iscsi_reconfig_boot_sess(ihp)) {
2091 rtn = EINVAL;
2092 break;
2093 }
2094 }
2095 }
2096 }
2097 break;
2098
2099 /*
2100 * ISCSI_TARGET_OID_LIST_GET -
2101 */
2102 case ISCSI_TARGET_OID_LIST_GET:
2103 /* copyin user args */
2104 if (ddi_copyin((caddr_t)arg, &idl,
2105 sizeof (idl), mode)) {
2106 rtn = EFAULT;
2107 break;
2108 }
2109
2110 if (idl.tl_vers != ISCSI_INTERFACE_VERSION) {
2111 rtn = EINVAL;
2112 break;
2113 }
2114
2115 list_space = sizeof (iscsi_target_list_t);
2116 if (idl.tl_in_cnt != 0)
2117 list_space += (sizeof (uint32_t) *
2118 (idl.tl_in_cnt - 1));
2119
2120 idlp = kmem_zalloc(list_space, KM_SLEEP);
2121 bcopy(&idl, idlp, sizeof (idl));
2122 idlp->tl_out_cnt = 0;
2123
2124 /*
2125 * If target list type is ISCSI_TGT_OID_LIST and discovery
2126 * has not been completed or in progress, poke the discovery
2127 * methods so target information is returned
2128 */
2129 mutex_enter(&ihp->hba_discovery_events_mutex);
2130 method = ihp->hba_discovery_events;
2131 if ((idl.tl_tgt_list_type == ISCSI_TGT_OID_LIST) &&
2132 (method != ISCSI_ALL_DISCOVERY_METHODS) &&
2133 (ihp->hba_discovery_in_progress == B_FALSE)) {
2134 ihp->hba_discovery_in_progress = B_TRUE;
2135 mutex_exit(&ihp->hba_discovery_events_mutex);
2136 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown);
2137 mutex_enter(&ihp->hba_discovery_events_mutex);
2138 ihp->hba_discovery_in_progress = B_FALSE;
2139 }
2140 mutex_exit(&ihp->hba_discovery_events_mutex);
2141
2142 /*
2143 * Return the correct list information based on the type
2144 */
2145 switch (idl.tl_tgt_list_type) {
2146 /* ISCSI_TGT_PARAM_OID_LIST - iscsiadm list target-params */
2147 case ISCSI_TGT_PARAM_OID_LIST:
2148 /* get params from persistent store */
2149 iscsi_targetparam_lock_list(RW_READER);
2150 curr_entry = iscsi_targetparam_get_next_entry(NULL);
2151 while (curr_entry != NULL) {
2152 if (idlp->tl_out_cnt < idlp->tl_in_cnt) {
2153 idlp->tl_oid_list[idlp->tl_out_cnt] =
2154 curr_entry->target_oid;
2155 }
2156 idlp->tl_out_cnt++;
2157 curr_entry = iscsi_targetparam_get_next_entry(
2158 curr_entry);
2159 }
2160 iscsi_targetparam_unlock_list();
2161 break;
2162
2163 /* ISCSI_STATIC_TGT_OID_LIST - iscsiadm list static-config */
2164 case ISCSI_STATIC_TGT_OID_LIST:
2165 {
2166 char *target_name = NULL;
2167 void *v = NULL;
2168
2169 /* get static-config from persistent store */
2170 target_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
2171 persistent_static_addr_lock();
2172 while (persistent_static_addr_next(&v,
2173 (char *)target_name, &e) == B_TRUE) {
2174
2175 if (idlp->tl_out_cnt < idlp->tl_in_cnt) {
2176 idlp->tl_oid_list[idlp->tl_out_cnt] =
2177 e.e_oid;
2178 }
2179 idlp->tl_out_cnt++;
2180
2181 }
2182
2183 persistent_static_addr_unlock();
2184 kmem_free(target_name, ISCSI_MAX_NAME_LEN);
2185 break;
2186 }
2187
2188 /* ISCSI_TGT_OID_LIST - iscsiadm list target */
2189 case ISCSI_TGT_OID_LIST:
2190
2191 /* get sessions from hba's session list */
2192 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2193 for (isp = ihp->hba_sess_list; isp;
2194 isp = isp->sess_next) {
2195
2196 if (((isp->sess_state !=
2197 ISCSI_SESS_STATE_FREE) ||
2198 (isp->sess_discovered_by !=
2199 iSCSIDiscoveryMethodUnknown)) &&
2200 (isp->sess_type ==
2201 ISCSI_SESS_TYPE_NORMAL)) {
2202 if (idlp->tl_out_cnt <
2203 idlp->tl_in_cnt) {
2204 idlp->tl_oid_list[
2205 idlp->tl_out_cnt] =
2206 isp->sess_oid;
2207 }
2208 idlp->tl_out_cnt++;
2209 }
2210
2211 }
2212 rw_exit(&ihp->hba_sess_list_rwlock);
2213 break;
2214
2215 default:
2216 ASSERT(FALSE);
2217 }
2218
2219 rtn = ddi_copyout(idlp, (caddr_t)arg, list_space, mode);
2220 kmem_free(idlp, list_space);
2221 break;
2222
2223 /*
2224 * ISCSI_TARGET_PROPS_GET -
2225 */
2226 case ISCSI_TARGET_PROPS_GET:
2227 /* ---- fall through sense the code is almost the same ---- */
2228
2229 /*
2230 * ISCSI_TARGET_PROPS_SET -
2231 */
2232 case ISCSI_TARGET_PROPS_SET:
2233 /* copyin user args */
2234 ipp = (iscsi_property_t *)kmem_alloc(sizeof (*ipp),
2235 KM_SLEEP);
2236 if (ddi_copyin((caddr_t)arg, ipp, sizeof (*ipp), mode)) {
2237 rtn = EFAULT;
2238 kmem_free(ipp, sizeof (*ipp));
2239 break;
2240 }
2241
2242 if (ipp->p_vers != ISCSI_INTERFACE_VERSION) {
2243 rtn = EINVAL;
2244 kmem_free(ipp, sizeof (*ipp));
2245 break;
2246 }
2247
2248 rtn = iscsi_target_prop_mod(ihp, ipp, cmd);
2249 if (rtn == 0)
2250 rtn = ddi_copyout(ipp, (caddr_t)arg,
2251 sizeof (*ipp), mode);
2252 kmem_free(ipp, sizeof (*ipp));
2253 break;
2254
2255 /*
2256 * ISCSI_TARGET_ADDRESS_GET -
2257 */
2258 case ISCSI_TARGET_ADDRESS_GET:
2259 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) {
2260 rtn = EFAULT;
2261 break;
2262 }
2263
2264 if (ial.al_vers != ISCSI_INTERFACE_VERSION) {
2265 rtn = EINVAL;
2266 break;
2267 }
2268
2269 /*
2270 * Find out how much space we need to malloc for the users
2271 * request.
2272 */
2273 list_space = sizeof (iscsi_addr_list_t);
2274 if (ial.al_in_cnt != 0) {
2275 list_space += (sizeof (iscsi_addr_t) *
2276 (ial.al_in_cnt - 1));
2277 }
2278 ialp = (iscsi_addr_list_t *)kmem_zalloc(list_space, KM_SLEEP);
2279
2280 /* Copy in the header portion */
2281 bcopy(&ial, ialp, sizeof (ial));
2282
2283 /* session */
2284 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2285 rtn = iscsi_sess_get(ialp->al_oid, ihp, &isp);
2286 if (rtn != 0) {
2287 rw_exit(&ihp->hba_sess_list_rwlock);
2288 rtn = EFAULT;
2289 break;
2290 }
2291
2292 ialp->al_out_cnt = 0;
2293 ialp->al_tpgt = isp->sess_tpgt_conf;
2294 rw_enter(&isp->sess_conn_list_rwlock, RW_READER);
2295 for (icp = isp->sess_conn_list; icp; icp = icp->conn_next) {
2296 if (icp->conn_state != ISCSI_CONN_STATE_LOGGED_IN) {
2297 continue;
2298 }
2299 if (ialp->al_out_cnt < ialp->al_in_cnt) {
2300 iscsi_addr_t *ap;
2301
2302 ap = &ialp->al_addrs[ialp->al_out_cnt];
2303 if (icp->conn_base_addr.sin.sa_family
2304 == AF_INET) {
2305
2306 struct sockaddr_in *addr_in =
2307 (struct sockaddr_in *)&icp->
2308 conn_base_addr.sin4;
2309 ap->a_addr.i_insize =
2310 sizeof (struct in_addr);
2311 bcopy(&addr_in->sin_addr.s_addr,
2312 &ap->a_addr.i_addr.in4.s_addr,
2313 sizeof (struct in_addr));
2314 ap->a_port = addr_in->sin_port;
2315
2316 } else {
2317
2318 struct sockaddr_in6 *addr_in6 =
2319 (struct sockaddr_in6 *)&icp->
2320 conn_base_addr.sin6;
2321 ap->a_addr.i_insize =
2322 sizeof (struct in6_addr);
2323 bcopy(&addr_in6->sin6_addr.s6_addr,
2324 &ap->a_addr.i_addr.in6.s6_addr,
2325 sizeof (struct in6_addr));
2326 ap->a_port = addr_in6->sin6_port;
2327
2328 }
2329 }
2330 ialp->al_out_cnt++;
2331 }
2332 rw_exit(&isp->sess_conn_list_rwlock);
2333 rw_exit(&ihp->hba_sess_list_rwlock);
2334
2335 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode);
2336 kmem_free(ialp, list_space);
2337 break;
2338
2339 /*
2340 * ISCSI_CHAP_SET -
2341 */
2342 case ISCSI_CHAP_SET:
2343 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap),
2344 KM_SLEEP);
2345 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) {
2346 rtn = EFAULT;
2347 kmem_free(chap, sizeof (*chap));
2348 break;
2349 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) {
2350 rtn = EINVAL;
2351 kmem_free(chap, sizeof (*chap));
2352 break;
2353 }
2354
2355 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2356 if (chap->c_oid == ihp->hba_oid)
2357 name = ihp->hba_name;
2358 else {
2359 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp);
2360 if (rtn != 0) {
2361 rtn = iscsi_sess_get_by_target(
2362 chap->c_oid, ihp, &isp);
2363 }
2364
2365 /*
2366 * If rtn is zero then we have found an
2367 * existing session. Use the session name to
2368 * do param lookup. If rtn is non-zero then
2369 * create a targetparam object and use its name
2370 * for param lookup.
2371 */
2372 if (rtn == 0) {
2373 name = isp->sess_name;
2374 } else {
2375 name =
2376 iscsi_targetparam_get_name(chap->c_oid);
2377 rtn = 0;
2378 }
2379 }
2380
2381 if (name == NULL) {
2382 rw_exit(
2383 &ihp->hba_sess_list_rwlock);
2384 rtn = EFAULT;
2385 kmem_free(chap, sizeof (*chap));
2386 break;
2387 }
2388
2389 if (persistent_chap_set((char *)name, chap) ==
2390 B_FALSE) {
2391 rtn = EIO;
2392 }
2393 rw_exit(&ihp->hba_sess_list_rwlock);
2394 kmem_free(chap, sizeof (*chap));
2395 break;
2396
2397 /*
2398 * ISCSI_CHAP_GET -
2399 */
2400 case ISCSI_CHAP_GET:
2401 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap),
2402 KM_SLEEP);
2403 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) {
2404 kmem_free(chap, sizeof (*chap));
2405 rtn = EFAULT;
2406 break;
2407 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) {
2408 kmem_free(chap, sizeof (*chap));
2409 rtn = EINVAL;
2410 break;
2411 }
2412
2413 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2414 if (chap->c_oid == ihp->hba_oid)
2415 name = ihp->hba_name;
2416 else {
2417 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp);
2418 if (rtn != 0) {
2419 rtn = iscsi_sess_get_by_target(
2420 chap->c_oid, ihp, &isp);
2421 }
2422
2423 /*
2424 * If rtn is zero then we have found an
2425 * existing session. Use the session name to
2426 * do param lookup. If rtn is non-zero then
2427 * create a targetparam object and use its name
2428 * for param lookup.
2429 */
2430 if (rtn == 0) {
2431 name = isp->sess_name;
2432 } else {
2433 rtn = 0;
2434 name =
2435 iscsi_targetparam_get_name(chap->c_oid);
2436 }
2437
2438 if (name == NULL) {
2439 rw_exit(&ihp->hba_sess_list_rwlock);
2440 rtn = EFAULT;
2441 break;
2442 }
2443 /*
2444 * Initialize the target-side chap name to the
2445 * session name if no chap settings have been
2446 * saved for the current session.
2447 */
2448 if (persistent_chap_get((char *)name,
2449 chap) == B_FALSE) {
2450 int name_len = strlen((char *)name);
2451 iscsi_chap_props_t *chap = NULL;
2452 chap = (iscsi_chap_props_t *)kmem_zalloc
2453 (sizeof (iscsi_chap_props_t), KM_SLEEP);
2454 bcopy((char *)name, chap->c_user, name_len);
2455 chap->c_user_len = name_len;
2456 (void) (persistent_chap_set((char *)name,
2457 chap));
2458 kmem_free(chap, sizeof (*chap));
2459 }
2460 }
2461
2462 if (name == NULL) {
2463 rw_exit(
2464 &ihp->hba_sess_list_rwlock);
2465 rtn = EFAULT;
2466 break;
2467 }
2468
2469 if (persistent_chap_get((char *)name, chap) == B_FALSE) {
2470 rw_exit(&ihp->hba_sess_list_rwlock);
2471 rtn = EIO;
2472 break;
2473 }
2474 rw_exit(&ihp->hba_sess_list_rwlock);
2475
2476 rtn = ddi_copyout(chap, (caddr_t)arg, sizeof (*chap), mode);
2477 kmem_free(chap, sizeof (*chap));
2478 break;
2479
2480 /*
2481 * ISCSI_CHAP_CLEAR -
2482 */
2483 case ISCSI_CHAP_CLEAR:
2484 chap = (iscsi_chap_props_t *)kmem_zalloc(sizeof (*chap),
2485 KM_SLEEP);
2486 if (ddi_copyin((caddr_t)arg, chap, sizeof (*chap), mode)) {
2487 rtn = EFAULT;
2488 kmem_free(chap, sizeof (*chap));
2489 break;
2490 } else if (chap->c_vers != ISCSI_INTERFACE_VERSION) {
2491 rtn = EINVAL;
2492 kmem_free(chap, sizeof (*chap));
2493 break;
2494 }
2495
2496 if (chap->c_oid == ihp->hba_oid) {
2497 iscsi_sess_t *sessp;
2498
2499 name = ihp->hba_name;
2500
2501 if (persistent_chap_clear(
2502 (char *)name) == B_FALSE) {
2503 rtn = EIO;
2504 }
2505
2506 /*
2507 * Loop through all sessions and memset their
2508 * (initiator's) passwords
2509 */
2510 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2511 for (sessp = ihp->hba_sess_list; sessp;
2512 sessp = sessp->sess_next) {
2513 (void) memset(sessp->sess_auth.password,
2514 0, iscsiAuthStringMaxLength);
2515 sessp->sess_auth.password_length = 0;
2516 }
2517 rw_exit(&ihp->hba_sess_list_rwlock);
2518
2519 } else {
2520 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
2521 /*
2522 * If the oid does represent a session check to see
2523 * if it is a target oid. If so, return the target's
2524 * associated session.
2525 */
2526 rtn = iscsi_sess_get(chap->c_oid, ihp, &isp);
2527 if (rtn != 0) {
2528 rtn = iscsi_sess_get_by_target(chap->c_oid,
2529 ihp, &isp);
2530 }
2531
2532 rw_exit(&ihp->hba_sess_list_rwlock);
2533
2534 /*
2535 * If rtn is zero then we have found an
2536 * existing session. Use the session name to
2537 * do param lookup. If rtn is non-zero then
2538 * create a targetparam object and use its name
2539 * for param lookup.
2540 */
2541 if (rtn == 0) {
2542 name = isp->sess_name;
2543 } else {
2544 name =
2545 iscsi_targetparam_get_name(chap->c_oid);
2546 rtn = 0;
2547 }
2548
2549 if (name == NULL) {
2550 rtn = EFAULT;
2551 break;
2552 }
2553
2554 if (persistent_chap_clear(
2555 (char *)name) == B_FALSE) {
2556 rtn = EIO;
2557 }
2558
2559 /*
2560 * Clear out session chap password if we found a
2561 * session above.
2562 */
2563 if (isp != NULL) {
2564 (void) memset(isp->sess_auth.password_in,
2565 0, iscsiAuthStringMaxLength);
2566 isp->sess_auth.password_length_in = 0;
2567 }
2568
2569 }
2570
2571 kmem_free(chap, sizeof (*chap));
2572 break;
2573
2574 /*
2575 * ISCSI_STATIC_GET -
2576 */
2577 case ISCSI_STATIC_GET:
2578 ispp = (iscsi_static_property_t *)kmem_alloc(
2579 sizeof (*ispp), KM_SLEEP);
2580
2581 if (ddi_copyin((caddr_t)arg, ispp, sizeof (*ispp), mode)) {
2582 rtn = EFAULT;
2583 kmem_free(ispp, sizeof (*ispp));
2584 break;
2585 }
2586
2587 if (ispp->p_vers != ISCSI_INTERFACE_VERSION) {
2588 rtn = EINVAL;
2589 kmem_free(ispp, sizeof (*ispp));
2590 break;
2591 }
2592
2593 {
2594 void *v = NULL;
2595 boolean_t found = B_FALSE;
2596
2597 persistent_static_addr_lock();
2598 while (persistent_static_addr_next(&v,
2599 (char *)ispp->p_name, &e) == B_TRUE) {
2600
2601 if (ispp->p_oid == e.e_oid) {
2602 /*
2603 * In case there are multiple
2604 * addresses associated with the
2605 * given target OID, pick the first
2606 * one.
2607 */
2608 iscsi_addr_t *ap;
2609
2610 ap = &(ispp->p_addr_list.al_addrs[0]);
2611 ap->a_port = e.e_port;
2612 ap->a_addr.i_insize = e.e_insize;
2613 bcopy(e.e_u.u_in6.s6_addr,
2614 ap->a_addr.i_addr.in6.s6_addr,
2615 e.e_insize);
2616 ispp->p_name_len =
2617 strlen((char *)ispp->p_name);
2618 ispp->p_addr_list.al_tpgt = e.e_tpgt;
2619 ispp->p_addr_list.al_out_cnt = 1;
2620
2621 found = B_TRUE;
2622 break;
2623 }
2624 }
2625 persistent_static_addr_unlock();
2626
2627 if (found == B_TRUE) {
2628 rtn = ddi_copyout(ispp, (caddr_t)arg,
2629 sizeof (*ispp), mode);
2630 } else {
2631 rtn = ENOENT;
2632 }
2633 }
2634 kmem_free(ispp, sizeof (*ispp));
2635
2636 break;
2637
2638 /*
2639 * ISCSI_STATIC_SET -
2640 */
2641 case ISCSI_STATIC_SET:
2642 target = iscsi_ioctl_copyin((caddr_t)arg, mode,
2643 sizeof (*target));
2644 if (target == NULL) {
2645 rtn = EFAULT;
2646 break;
2647 }
2648
2649 if ((target->te_entry.e_vers != ISCSI_INTERFACE_VERSION) ||
2650 (target->te_entry.e_insize == 0)) {
2651 kmem_free(target, sizeof (*target));
2652 rtn = EINVAL;
2653 break;
2654 }
2655
2656 /* Check if the target's already been added */
2657 {
2658 boolean_t static_target_found = B_FALSE;
2659 void *v = NULL;
2660
2661 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
2662 persistent_static_addr_lock();
2663 while (persistent_static_addr_next(&v, (char *)name,
2664 &e) == B_TRUE) {
2665 /*
2666 * MC/S - Need to check IP address and port
2667 * number as well when we support MC/S.
2668 */
2669 if ((strncmp((char *)name,
2670 (char *)target->te_name,
2671 ISCSI_MAX_NAME_LEN) == 0) &&
2672 (target->te_entry.e_tpgt == e.e_tpgt) &&
2673 (target->te_entry.e_insize == e.e_insize) &&
2674 (bcmp(&target->te_entry.e_u, &e.e_u,
2675 e.e_insize) == 0)) {
2676 /*
2677 * We don't allow MC/S for now but
2678 * we do allow adding the same target
2679 * with different TPGTs (hence,
2680 * different sessions).
2681 */
2682 static_target_found = B_TRUE;
2683 break;
2684 }
2685 }
2686 persistent_static_addr_unlock();
2687 kmem_free(name, ISCSI_MAX_NAME_LEN);
2688
2689 if (static_target_found == B_TRUE) {
2690 /* Duplicate entry */
2691 kmem_free(target, sizeof (*target));
2692 rtn = EEXIST;
2693 break;
2694 }
2695 }
2696
2697 if (target->te_entry.e_oid == ISCSI_OID_NOTSET) {
2698 mutex_enter(&iscsi_oid_mutex);
2699 target->te_entry.e_oid = iscsi_oid++;
2700 mutex_exit(&iscsi_oid_mutex);
2701 }
2702
2703 persistent_static_addr_lock();
2704 if (persistent_static_addr_set((char *)target->te_name,
2705 &target->te_entry) == B_FALSE) {
2706 persistent_static_addr_unlock();
2707 kmem_free(target, sizeof (*target));
2708 rtn = EIO;
2709 break;
2710 }
2711 persistent_static_addr_unlock();
2712
2713 /*
2714 * If Static Targets discovery is enabled, then add
2715 * target to discovery queue. Otherwise, just create
2716 * the session for potential future use.
2717 */
2718 method = persistent_disc_meth_get();
2719 if (method & iSCSIDiscoveryMethodStatic) {
2720 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodStatic);
2721 (void) iscsid_login_tgt(ihp, (char *)target->te_name,
2722 iSCSIDiscoveryMethodStatic, NULL);
2723 }
2724
2725 rtn = iscsi_ioctl_copyout(target, sizeof (*target),
2726 (caddr_t)arg, mode);
2727 break;
2728
2729 /*
2730 * ISCSI_STATIC_CLEAR -
2731 */
2732 case ISCSI_STATIC_CLEAR:
2733 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
2734 rtn = EFAULT;
2735 break;
2736 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
2737 rtn = EINVAL;
2738 break;
2739 }
2740
2741 {
2742 boolean_t found = B_FALSE;
2743 void *v = NULL;
2744 entry_t tmp_e;
2745 char *name = NULL;
2746
2747 name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
2748
2749 /* Find name for matching static_tgt oid */
2750 persistent_static_addr_lock();
2751 while (persistent_static_addr_next(&v,
2752 (char *)name, &tmp_e) == B_TRUE) {
2753 if (e.e_oid == tmp_e.e_oid) {
2754 found = B_TRUE;
2755 break;
2756 }
2757 }
2758
2759 /* If static_tgt found logout and remove it */
2760 if (found == B_TRUE) {
2761
2762 iscsid_addr_to_sockaddr(tmp_e.e_insize,
2763 &tmp_e.e_u, tmp_e.e_port, &addr_dsc.sin);
2764
2765 persistent_static_addr_unlock();
2766
2767 /*
2768 * If discovery in progress, try few times
2769 * before return busy
2770 */
2771 retry = 0;
2772 mutex_enter(&ihp->hba_discovery_events_mutex);
2773 while (ihp->hba_discovery_in_progress ==
2774 B_TRUE) {
2775 if (++retry == 5) {
2776 rtn = EBUSY;
2777 break;
2778 }
2779 mutex_exit(
2780 &ihp->hba_discovery_events_mutex);
2781 delay(SEC_TO_TICK(
2782 ISCSI_DISC_DELAY));
2783 mutex_enter(
2784 &ihp->hba_discovery_events_mutex);
2785 }
2786 /* remove from persistent store */
2787 if (rtn == 0 && persistent_static_addr_clear(
2788 e.e_oid) == B_FALSE) {
2789 rtn = EIO;
2790 }
2791 mutex_exit(&ihp->hba_discovery_events_mutex);
2792
2793 if (rtn != 0) {
2794 kmem_free(name, ISCSI_MAX_NAME_LEN);
2795 break;
2796 }
2797
2798 /* Attempt to logout of target */
2799 if (iscsid_del(ihp, (char *)name,
2800 iSCSIDiscoveryMethodStatic, &addr_dsc.sin)
2801 == B_FALSE) {
2802 persistent_static_addr_lock();
2803
2804 /*
2805 * Restore static_tgt to
2806 * persistent store
2807 */
2808 if (persistent_static_addr_set(
2809 (char *)name,
2810 &tmp_e) == B_FALSE) {
2811 cmn_err(CE_WARN, "Failed to "
2812 "restore static target "
2813 "address after logout "
2814 "target failure.");
2815 }
2816 persistent_static_addr_unlock();
2817 rtn = EBUSY;
2818 } else {
2819 iscsid_poke_discovery(ihp,
2820 iSCSIDiscoveryMethodStatic);
2821 (void) iscsid_login_tgt(ihp,
2822 (char *)name,
2823 iSCSIDiscoveryMethodStatic,
2824 NULL);
2825
2826 }
2827 } else {
2828 persistent_static_addr_unlock();
2829 rtn = EIO;
2830 }
2831 kmem_free(name, ISCSI_MAX_NAME_LEN);
2832 }
2833 break;
2834
2835 /*
2836 * ISCSI_ISNS_SERVER_ADDR_SET:
2837 */
2838 case ISCSI_ISNS_SERVER_ADDR_SET:
2839 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
2840 rtn = EFAULT;
2841 break;
2842 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
2843 rtn = EINVAL;
2844 break;
2845 }
2846
2847 if (persistent_isns_addr_set(&e) == B_FALSE) {
2848 rtn = EIO;
2849 break;
2850 }
2851
2852 /*
2853 * If iSNS server discovery is enabled, then kickoff
2854 * discovery of the targets advertised by the recently
2855 * added iSNS server address.
2856 */
2857 method = persistent_disc_meth_get();
2858 if (method & iSCSIDiscoveryMethodISNS) {
2859 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN,
2860 KM_SLEEP);
2861 if (persistent_initiator_name_get(initiator_node_name,
2862 ISCSI_MAX_NAME_LEN) != B_TRUE) {
2863 kmem_free(initiator_node_name,
2864 ISCSI_MAX_NAME_LEN);
2865 initiator_node_name = NULL;
2866 rtn = EIO;
2867 break;
2868 }
2869 if (strlen(initiator_node_name) == 0) {
2870 kmem_free(initiator_node_name,
2871 ISCSI_MAX_NAME_LEN);
2872 initiator_node_name = NULL;
2873 rtn = EIO;
2874 break;
2875 }
2876
2877 initiator_node_alias = kmem_zalloc(ISCSI_MAX_NAME_LEN,
2878 KM_SLEEP);
2879 if (persistent_alias_name_get(initiator_node_alias,
2880 ISCSI_MAX_NAME_LEN) != B_TRUE) {
2881 initiator_node_alias[0] = '\0';
2882 }
2883
2884 /*
2885 * Register this initiator node against this iSNS
2886 * server.
2887 */
2888 (void) isns_reg_one_server(&e, ihp->hba_isid,
2889 (uint8_t *)initiator_node_name,
2890 ISCSI_MAX_NAME_LEN,
2891 (uint8_t *)initiator_node_alias,
2892 ISCSI_MAX_NAME_LEN,
2893 ISNS_INITIATOR_NODE_TYPE,
2894 isns_scn_callback);
2895
2896 iscsid_do_isns_query_one_server(ihp, &e);
2897
2898 iscsid_addr_to_sockaddr(e.e_insize,
2899 &e.e_u, e.e_port, &addr_dsc.sin);
2900
2901 (void) iscsid_login_tgt(ihp, NULL,
2902 iSCSIDiscoveryMethodISNS,
2903 &addr_dsc.sin);
2904
2905 /* Done using the name and alias - free them. */
2906 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
2907 initiator_node_name = NULL;
2908 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN);
2909 initiator_node_alias = NULL;
2910 }
2911 break;
2912
2913 /*
2914 * ISCSI_DISCOVERY_ADDR_SET:
2915 */
2916 case ISCSI_DISCOVERY_ADDR_SET:
2917 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
2918 rtn = EFAULT;
2919 break;
2920 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
2921 rtn = EINVAL;
2922 break;
2923 }
2924
2925 if (e.e_oid == ISCSI_OID_NOTSET) {
2926 mutex_enter(&iscsi_oid_mutex);
2927 e.e_oid = iscsi_oid++;
2928 mutex_exit(&iscsi_oid_mutex);
2929 }
2930
2931 if (persistent_disc_addr_set(&e) == B_FALSE) {
2932 rtn = EIO;
2933 break;
2934 }
2935
2936 /*
2937 * If Send Targets discovery is enabled, then kickoff
2938 * discovery of the targets advertised by the recently
2939 * added discovery address.
2940 */
2941 method = persistent_disc_meth_get();
2942 if (method & iSCSIDiscoveryMethodSendTargets) {
2943
2944 iscsid_addr_to_sockaddr(e.e_insize,
2945 &e.e_u, e.e_port, &addr_dsc.sin);
2946 iscsid_do_sendtgts(&e);
2947 (void) iscsid_login_tgt(ihp, NULL,
2948 iSCSIDiscoveryMethodSendTargets,
2949 &addr_dsc.sin);
2950
2951 }
2952 break;
2953
2954 /*
2955 * ISCSI_DISCOVERY_ADDR_LIST_GET
2956 */
2957 case ISCSI_DISCOVERY_ADDR_LIST_GET:
2958 /* copyin user args */
2959 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) {
2960 rtn = EFAULT;
2961 break;
2962 }
2963
2964 if (ial.al_vers != ISCSI_INTERFACE_VERSION) {
2965 rtn = EINVAL;
2966 break;
2967 }
2968
2969 list_space = sizeof (iscsi_addr_list_t);
2970 if (ial.al_in_cnt != 0) {
2971 list_space += (sizeof (iscsi_addr_t) *
2972 (ial.al_in_cnt - 1));
2973 }
2974
2975 ialp = kmem_zalloc(list_space, KM_SLEEP);
2976 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t));
2977
2978 void_p = NULL;
2979 ialp->al_out_cnt = 0;
2980 persistent_disc_addr_lock();
2981 while (persistent_disc_addr_next(&void_p, &e) == B_TRUE) {
2982 if (ialp->al_out_cnt < ialp->al_in_cnt) {
2983 int i = ialp->al_out_cnt;
2984 iscsi_addr_t *addr = &ialp->al_addrs[i];
2985
2986 addr->a_port = e.e_port;
2987 addr->a_addr.i_insize = e.e_insize;
2988 addr->a_oid = e.e_oid;
2989
2990 if (e.e_insize == sizeof (struct in_addr)) {
2991 /* IPv4 */
2992 addr->a_addr.i_addr.in4.s_addr =
2993 e.e_u.u_in4.s_addr;
2994 } else if (e.e_insize ==
2995 sizeof (struct in6_addr)) {
2996 /* IPv6 */
2997 bcopy(e.e_u.u_in6.s6_addr,
2998 addr->a_addr.i_addr.in6.s6_addr,
2999 16);
3000 }
3001 }
3002 ialp->al_out_cnt++;
3003 }
3004 persistent_disc_addr_unlock();
3005
3006 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode);
3007 kmem_free(ialp, list_space);
3008 break;
3009
3010 /*
3011 * ISCSI_ISNS_SERVER_ADDR_LIST_GET
3012 */
3013 case ISCSI_ISNS_SERVER_ADDR_LIST_GET:
3014 /* copyin user args */
3015 if (ddi_copyin((caddr_t)arg, &ial, sizeof (ial), mode)) {
3016 rtn = EFAULT;
3017 break;
3018 }
3019
3020 if (ial.al_vers != ISCSI_INTERFACE_VERSION) {
3021 rtn = EINVAL;
3022 break;
3023 }
3024
3025 list_space = sizeof (iscsi_addr_list_t);
3026 if (ial.al_in_cnt != 0) {
3027 list_space += (sizeof (iscsi_addr_t) *
3028 (ial.al_in_cnt - 1));
3029 }
3030
3031 ialp = kmem_zalloc(list_space, KM_SLEEP);
3032 bcopy(&ial, ialp, sizeof (iscsi_addr_list_t));
3033
3034 void_p = NULL;
3035 ialp->al_out_cnt = 0;
3036 persistent_isns_addr_lock();
3037 while (persistent_isns_addr_next(&void_p, &e) == B_TRUE) {
3038 if (ialp->al_out_cnt < ialp->al_in_cnt) {
3039 int i = ialp->al_out_cnt;
3040 iscsi_addr_t *addr = &ialp->al_addrs[i];
3041
3042 addr->a_port = e.e_port;
3043 addr->a_addr.i_insize = e.e_insize;
3044 if (e.e_insize == sizeof (struct in_addr)) {
3045 /* IPv4 */
3046 addr->a_addr.i_addr.in4.s_addr =
3047 e.e_u.u_in4.s_addr;
3048 } else if (e.e_insize ==
3049 sizeof (struct in6_addr)) {
3050 /* IPv6 */
3051 bcopy(e.e_u.u_in6.s6_addr,
3052 addr->a_addr.i_addr.in6.s6_addr,
3053 16);
3054 }
3055 }
3056 ialp->al_out_cnt++;
3057 }
3058 persistent_isns_addr_unlock();
3059
3060 rtn = ddi_copyout(ialp, (caddr_t)arg, list_space, mode);
3061 kmem_free(ialp, list_space);
3062 break;
3063
3064 /*
3065 * ISCSI_DISCOVERY_ADDR_CLEAR:
3066 */
3067 case ISCSI_DISCOVERY_ADDR_CLEAR:
3068 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
3069 rtn = EFAULT;
3070 break;
3071 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
3072 rtn = EINVAL;
3073 break;
3074 }
3075
3076 iscsid_addr_to_sockaddr(e.e_insize,
3077 &e.e_u, e.e_port, &addr_dsc.sin);
3078
3079 /* If discovery in progress, try few times before return busy */
3080 retry = 0;
3081 mutex_enter(&ihp->hba_discovery_events_mutex);
3082 while (ihp->hba_discovery_in_progress == B_TRUE) {
3083 if (++retry == 5) {
3084 rtn = EBUSY;
3085 break;
3086 }
3087 mutex_exit(&ihp->hba_discovery_events_mutex);
3088 delay(SEC_TO_TICK(ISCSI_DISC_DELAY));
3089 mutex_enter(&ihp->hba_discovery_events_mutex);
3090 }
3091
3092 /*
3093 * Clear discovery address first, so that any bus config
3094 * will ignore this discovery address
3095 */
3096 if (rtn == 0 && persistent_disc_addr_clear(&e) == B_FALSE) {
3097 rtn = EIO;
3098 }
3099 mutex_exit(&ihp->hba_discovery_events_mutex);
3100
3101 if (rtn != 0) {
3102 break;
3103 }
3104 /* Attempt to logout of associated targets */
3105 if (iscsid_del(ihp, NULL,
3106 iSCSIDiscoveryMethodSendTargets, &addr_dsc.sin) ==
3107 B_FALSE) {
3108 /* Failure!, restore the discovery addr. */
3109 if (persistent_disc_addr_set(&e) == B_FALSE) {
3110 cmn_err(CE_WARN, "Failed to restore sendtgt "
3111 "discovery address after logout associated "
3112 "targets failures.");
3113 }
3114 rtn = EBUSY;
3115 }
3116 break;
3117
3118 /*
3119 * ISCSI_ISNS_SERVER_CLEAR:
3120 */
3121 case ISCSI_ISNS_SERVER_ADDR_CLEAR:
3122 if (ddi_copyin((caddr_t)arg, &e, sizeof (e), mode)) {
3123 rtn = EFAULT;
3124 break;
3125 } else if (e.e_vers != ISCSI_INTERFACE_VERSION) {
3126 rtn = EINVAL;
3127 break;
3128 }
3129
3130 iscsid_addr_to_sockaddr(e.e_insize,
3131 &e.e_u, e.e_port, &addr_dsc.sin);
3132
3133 /* If discovery in progress, try few times before return busy */
3134 retry = 0;
3135 mutex_enter(&ihp->hba_discovery_events_mutex);
3136 while (ihp->hba_discovery_in_progress == B_TRUE) {
3137 if (++retry == 5) {
3138 rtn = EBUSY;
3139 break;
3140 }
3141 mutex_exit(&ihp->hba_discovery_events_mutex);
3142 delay(SEC_TO_TICK(ISCSI_DISC_DELAY));
3143 mutex_enter(&ihp->hba_discovery_events_mutex);
3144 }
3145
3146 /*
3147 * Clear isns server address first, so that any bus config
3148 * will ignore any target registerd on this isns server
3149 */
3150 if (rtn == 0 && persistent_isns_addr_clear(&e) == B_FALSE) {
3151 rtn = EIO;
3152 }
3153 mutex_exit(&ihp->hba_discovery_events_mutex);
3154
3155 if (rtn != 0) {
3156 break;
3157 }
3158
3159 /* Attempt logout of associated targets */
3160 if (iscsid_del(ihp, NULL, iSCSIDiscoveryMethodISNS,
3161 &addr_dsc.sin) == B_FALSE) {
3162 /* Failure!, restore the isns server addr. */
3163
3164 if (persistent_isns_addr_set(&e) == B_FALSE) {
3165 cmn_err(CE_WARN, "Failed to restore isns server"
3166 " address after logout associated targets"
3167 " failures.");
3168 }
3169 rtn = EBUSY;
3170 } else {
3171 method = persistent_disc_meth_get();
3172 if (method & iSCSIDiscoveryMethodISNS) {
3173 boolean_t is_last_isns_server_b =
3174 B_FALSE;
3175 int isns_server_count = 0;
3176 void *void_p = NULL;
3177
3178 /*
3179 * Check if the last iSNS server's been
3180 * removed.
3181 */
3182 {
3183 entry_t tmp_e;
3184 persistent_isns_addr_lock();
3185 while (persistent_isns_addr_next(
3186 &void_p, &tmp_e) == B_TRUE) {
3187 isns_server_count++;
3188 }
3189 }
3190 persistent_isns_addr_unlock();
3191 if (isns_server_count == 0) {
3192 is_last_isns_server_b = B_TRUE;
3193 }
3194
3195 /*
3196 * Deregister this node from this iSNS
3197 * server.
3198 */
3199 initiator_node_name = kmem_zalloc(
3200 ISCSI_MAX_NAME_LEN, KM_SLEEP);
3201 if (persistent_initiator_name_get(
3202 initiator_node_name,
3203 ISCSI_MAX_NAME_LEN) == B_TRUE) {
3204
3205 if (strlen(initiator_node_name) > 0) {
3206 (void) isns_dereg_one_server(
3207 &e, (uint8_t *)
3208 initiator_node_name,
3209 is_last_isns_server_b);
3210 }
3211 }
3212 kmem_free(initiator_node_name,
3213 ISCSI_MAX_NAME_LEN);
3214 initiator_node_name = NULL;
3215 }
3216 }
3217 break;
3218
3219 /*
3220 * ISCSI_DISCOVERY_SET -
3221 */
3222 case ISCSI_DISCOVERY_SET:
3223 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) {
3224 rtn = EFAULT;
3225 break;
3226 }
3227
3228 if (persistent_disc_meth_set(method) == B_FALSE) {
3229 rtn = EIO;
3230 } else {
3231 (void) iscsid_enable_discovery(ihp, method, B_FALSE);
3232 iscsid_poke_discovery(ihp, method);
3233 (void) iscsid_login_tgt(ihp, NULL, method, NULL);
3234 }
3235 break;
3236
3237 /*
3238 * ISCSI_DISCOVERY_GET -
3239 */
3240 case ISCSI_DISCOVERY_GET:
3241 method = persistent_disc_meth_get();
3242 rtn = ddi_copyout(&method, (caddr_t)arg,
3243 sizeof (method), mode);
3244 break;
3245
3246 /*
3247 * ISCSI_DISCOVERY_CLEAR -
3248 */
3249 case ISCSI_DISCOVERY_CLEAR:
3250 if (ddi_copyin((caddr_t)arg, &method, sizeof (method), mode)) {
3251 rtn = EFAULT;
3252 break;
3253 }
3254
3255 /* If discovery in progress, try few times before return busy */
3256 retry = 0;
3257 mutex_enter(&ihp->hba_discovery_events_mutex);
3258 while (ihp->hba_discovery_in_progress == B_TRUE) {
3259 if (++retry == 5) {
3260 rtn = EBUSY;
3261 break;
3262 }
3263 mutex_exit(&ihp->hba_discovery_events_mutex);
3264 delay(SEC_TO_TICK(ISCSI_DISC_DELAY));
3265 mutex_enter(&ihp->hba_discovery_events_mutex);
3266 }
3267
3268 /*
3269 * Clear discovery first, so that any bus config or
3270 * discovery requests will ignore this discovery method
3271 */
3272 if (rtn == 0 && persistent_disc_meth_clear(method) == B_FALSE) {
3273 rtn = EIO;
3274 }
3275 mutex_exit(&ihp->hba_discovery_events_mutex);
3276
3277 if (rtn != 0) {
3278 break;
3279 }
3280
3281 /* Attempt to logout from all associated targets */
3282 if (iscsid_disable_discovery(ihp, method) == B_FALSE) {
3283 /* Failure!, reset the discovery */
3284 if (persistent_disc_meth_set(method) == B_FALSE) {
3285 cmn_err(CE_WARN, "Failed to reset discovery "
3286 "method after discovery disable failure.");
3287 }
3288 rtn = EBUSY;
3289 }
3290 break;
3291
3292 /*
3293 * ISCSI_DISCOVERY_PROPS -
3294 */
3295 case ISCSI_DISCOVERY_PROPS:
3296 iscsid_props(&discovery_props);
3297 if (ddi_copyout(&discovery_props, (caddr_t)arg,
3298 sizeof (discovery_props), mode))
3299 rtn = EFAULT;
3300 break;
3301
3302 /*
3303 * ISCSI_LUN_OID_LIST --
3304 */
3305 case ISCSI_LUN_OID_LIST_GET:
3306 ll = (iscsi_lun_list_t *)kmem_alloc(sizeof (*ll), KM_SLEEP);
3307 if (ddi_copyin((caddr_t)arg, ll, sizeof (*ll), mode)) {
3308 rtn = EFAULT;
3309 kmem_free(ll, sizeof (*ll));
3310 break;
3311 }
3312
3313 if (ll->ll_vers != ISCSI_INTERFACE_VERSION) {
3314 rtn = EINVAL;
3315 kmem_free(ll, sizeof (*ll));
3316 break;
3317 }
3318
3319 /*
3320 * Find out how much space the user has allocated in their
3321 * structure. Match the same space for our structure.
3322 */
3323 lun_sz = sizeof (iscsi_lun_list_t);
3324 if (ll->ll_in_cnt > 0) {
3325 lun_sz += (ll->ll_in_cnt - 1) * sizeof (iscsi_if_lun_t);
3326 }
3327
3328 llp = kmem_zalloc(lun_sz, KM_SLEEP);
3329 bcopy(ll, llp, sizeof (*ll));
3330 kmem_free(ll, sizeof (*ll));
3331
3332 /*
3333 * Check to see if oid references a target-param oid. If so,
3334 * find the associated session oid before getting lu list.
3335 */
3336 if (iscsi_targetparam_get_name(llp->ll_tgt_oid) != NULL) {
3337 for (isp = ihp->hba_sess_list; isp;
3338 isp = isp->sess_next) {
3339 if (isp->sess_target_oid == llp->ll_tgt_oid) {
3340 target_oid = isp->sess_oid;
3341 break;
3342 }
3343 }
3344 } else {
3345 target_oid = llp->ll_tgt_oid;
3346 }
3347
3348
3349 /*
3350 * Look at the LUNs attached to the specified target. If there
3351 * is space in the user structure save that information locally.
3352 * Always add up the count to the total. By always adding
3353 * the count this code can be used if ll_in_cnt == 0 and
3354 * the user just wishes to know the appropriate size to
3355 * allocate.
3356 */
3357 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3358 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) {
3359 if ((llp->ll_all_tgts == B_FALSE) &&
3360 (isp->sess_oid != target_oid)) {
3361 continue;
3362 }
3363 rw_enter(&isp->sess_lun_list_rwlock, RW_READER);
3364 for (ilp = isp->sess_lun_list; ilp;
3365 ilp = ilp->lun_next) {
3366 if ((ilp->lun_state &
3367 ISCSI_LUN_STATE_ONLINE) &&
3368 !(ilp->lun_state &
3369 ISCSI_LUN_STATE_INVALID)) {
3370 if (llp->ll_out_cnt <
3371 llp->ll_in_cnt) {
3372 iscsi_if_lun_t *lp;
3373 lp = &llp->ll_luns[
3374 llp->ll_out_cnt];
3375
3376 lp->l_tgt_oid =
3377 isp->sess_oid;
3378 lp->l_oid = ilp->lun_oid;
3379 lp->l_num = ilp->lun_num;
3380 }
3381 llp->ll_out_cnt++;
3382 }
3383 }
3384 rw_exit(&isp->sess_lun_list_rwlock);
3385 }
3386 rw_exit(&ihp->hba_sess_list_rwlock);
3387
3388 if (ddi_copyout(llp, (caddr_t)arg, lun_sz, mode)) {
3389 rtn = EFAULT;
3390 }
3391
3392 kmem_free(llp, lun_sz);
3393 break;
3394
3395 /*
3396 * ISCSI_LUN_PROPS_GET --
3397 */
3398 case ISCSI_LUN_PROPS_GET:
3399 lun = (iscsi_lun_props_t *)kmem_zalloc(sizeof (*lun), KM_SLEEP);
3400 if (ddi_copyin((caddr_t)arg, lun, sizeof (*lun), mode)) {
3401 rtn = EFAULT;
3402 kmem_free(lun, sizeof (*lun));
3403 break;
3404 }
3405
3406 if (lun->lp_vers != ISCSI_INTERFACE_VERSION) {
3407 rtn = EINVAL;
3408 kmem_free(lun, sizeof (*lun));
3409 break;
3410 }
3411
3412 /*
3413 * For the target specified, find the LUN specified and
3414 * return its properties
3415 */
3416 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3417 rtn = iscsi_sess_get(lun->lp_tgt_oid, ihp, &isp);
3418 if (rtn != 0) {
3419 rw_exit(&ihp->hba_sess_list_rwlock);
3420 rtn = EFAULT;
3421 kmem_free(lun, sizeof (*lun));
3422 break;
3423 }
3424 rtn = EINVAL; /* Set bad rtn, correct only if found */
3425 rw_enter(&isp->sess_lun_list_rwlock, RW_READER);
3426 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) {
3427 if (ilp->lun_oid == lun->lp_oid) {
3428 lun->lp_num = ilp->lun_num;
3429 lun->lp_status = LunValid;
3430 lun->lp_time_online = ilp->lun_time_online;
3431
3432 if (ilp->lun_pip != NULL) {
3433 lun_dip = mdi_pi_get_client(
3434 ilp->lun_pip);
3435 } else {
3436 lun_dip = ilp->lun_dip;
3437 }
3438
3439 if (lun_dip != NULL &&
3440 ((i_ddi_devi_attached(lun_dip)) ||
3441 (ddi_get_devstate(lun_dip) ==
3442 DDI_DEVSTATE_UP))) {
3443 (void) ddi_pathname(lun_dip,
3444 lun->lp_pathname);
3445 } else {
3446 /*
3447 * The LUN is not exported to the
3448 * OS yet. It is in the process
3449 * of being added.
3450 */
3451 lun->lp_status = LunDoesNotExist;
3452 }
3453 bcopy(ilp->lun_vid, lun->lp_vid,
3454 sizeof (lun->lp_vid));
3455 bcopy(ilp->lun_pid, lun->lp_pid,
3456 sizeof (lun->lp_pid));
3457 rtn = ddi_copyout(lun, (caddr_t)arg,
3458 sizeof (*lun), mode);
3459 if (rtn == -1) {
3460 rtn = EFAULT;
3461 }
3462 break;
3463 }
3464 }
3465 rw_exit(&isp->sess_lun_list_rwlock);
3466 rw_exit(&ihp->hba_sess_list_rwlock);
3467
3468 kmem_free(lun, sizeof (*lun));
3469 break;
3470
3471 /*
3472 * ISCSI_CONN_OID_LIST_GET --
3473 */
3474 #define ISCSIIOCOLGC iscsi_ioctl_conn_oid_list_get_copyout
3475 case ISCSI_CONN_OID_LIST_GET:
3476 {
3477 iscsi_conn_list_t *cl;
3478
3479 /* Asuume the worst */
3480 rtn = EFAULT;
3481
3482 /* Copy the input argument into kernel world. */
3483 cl = iscsi_ioctl_conn_oid_list_get_copyin(
3484 (caddr_t)arg,
3485 mode);
3486 if (cl != NULL) {
3487 if (iscsi_ioctl_conn_oid_list_get(ihp, cl) ==
3488 B_TRUE) {
3489 rtn =
3490 ISCSIIOCOLGC(
3491 cl, (caddr_t)arg, mode);
3492 }
3493 }
3494 break;
3495 }
3496 #undef ISCSIIOCOLGC
3497 /*
3498 * ISCSI_CONN_OID_LIST_GET --
3499 */
3500 case ISCSI_CONN_PROPS_GET:
3501 {
3502 iscsi_conn_props_t *cp;
3503
3504 /* Asuume the worst */
3505 rtn = EFAULT;
3506
3507 /* Copy the input argument into kernel world. */
3508 cp = iscsi_ioctl_copyin(
3509 (caddr_t)arg,
3510 mode,
3511 sizeof (iscsi_conn_props_t));
3512
3513 if (cp != NULL) {
3514 /* Get the propereties. */
3515 if (iscsi_ioctl_conn_props_get(ihp, cp) ==
3516 B_TRUE) {
3517 rtn =
3518 iscsi_ioctl_copyout(
3519 cp,
3520 sizeof (*cp),
3521 (caddr_t)arg,
3522 mode);
3523 } else {
3524 kmem_free(cp, sizeof (*cp));
3525 cp = NULL;
3526 }
3527 }
3528 break;
3529 }
3530
3531 /*
3532 * ISCSI_RADIUS_GET -
3533 */
3534 case ISCSI_RADIUS_GET:
3535 {
3536 iscsi_nvfile_status_t status;
3537
3538 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius),
3539 KM_SLEEP);
3540 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) {
3541 kmem_free(radius, sizeof (*radius));
3542 rtn = EFAULT;
3543 break;
3544 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) {
3545 kmem_free(radius, sizeof (*radius));
3546 rtn = EINVAL;
3547 break;
3548 }
3549
3550 old_oid = radius->r_oid;
3551
3552 if (radius->r_oid == ihp->hba_oid) {
3553 name = ihp->hba_name;
3554 } else {
3555 /*
3556 * RADIUS configuration should be done on a per
3557 * initiator basis.
3558 */
3559 kmem_free(radius, sizeof (*radius));
3560 rtn = EINVAL;
3561 break;
3562 }
3563
3564 status = persistent_radius_get(radius);
3565 if (status == ISCSI_NVFILE_SUCCESS) {
3566 /*
3567 * Restore the value for overridden (and bogus) oid.
3568 */
3569 radius->r_oid = old_oid;
3570 rtn = ddi_copyout(radius, (caddr_t)arg,
3571 sizeof (*radius), mode);
3572 } else if (status == ISCSI_NVFILE_NAMEVAL_NOT_FOUND) {
3573 rtn = ENOENT;
3574 } else {
3575 rtn = EIO;
3576 }
3577 kmem_free(radius, sizeof (*radius));
3578 break;
3579 }
3580
3581 /*
3582 * ISCSI_RADIUS_SET -
3583 */
3584 case ISCSI_RADIUS_SET:
3585 radius = (iscsi_radius_props_t *)kmem_zalloc(sizeof (*radius),
3586 KM_SLEEP);
3587 if (ddi_copyin((caddr_t)arg, radius, sizeof (*radius), mode)) {
3588 rtn = EFAULT;
3589 kmem_free(radius, sizeof (*radius));
3590 break;
3591 } else if (radius->r_vers != ISCSI_INTERFACE_VERSION) {
3592 rtn = EINVAL;
3593 kmem_free(radius, sizeof (*radius));
3594 break;
3595 }
3596
3597 if (radius->r_oid == ihp->hba_oid) {
3598 name = ihp->hba_name;
3599 } else {
3600 /*
3601 * RADIUS configuration should be done on a per
3602 * initiator basis.
3603 */
3604 kmem_free(radius, sizeof (*radius));
3605 rtn = EINVAL;
3606 break;
3607 }
3608
3609 if (persistent_radius_set(radius) == B_FALSE) {
3610 rtn = EIO;
3611 }
3612
3613 kmem_free(radius, sizeof (*radius));
3614 break;
3615
3616 /*
3617 * ISCSI_AUTH_GET -
3618 */
3619 case ISCSI_AUTH_GET:
3620 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth),
3621 KM_SLEEP);
3622 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) {
3623 kmem_free(auth, sizeof (*auth));
3624 rtn = EFAULT;
3625 break;
3626 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) {
3627 kmem_free(auth, sizeof (*auth));
3628 rtn = EINVAL;
3629 break;
3630 }
3631
3632 old_oid = auth->a_oid;
3633
3634 if (auth->a_oid == ihp->hba_oid) {
3635 name = ihp->hba_name;
3636 } else {
3637
3638 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3639 /*
3640 * If the oid does represent a session check to see
3641 * if it is a target oid. If so, return the target's
3642 * associated session.
3643 */
3644 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp);
3645 if (rtn != 0) {
3646 rtn = iscsi_sess_get_by_target(auth->a_oid,
3647 ihp, &isp);
3648 }
3649 rw_exit(&ihp->hba_sess_list_rwlock);
3650
3651 /*
3652 * If rtn is zero then we have found an
3653 * existing session. Use the session name to
3654 * do param lookup. If rtn is non-zero then
3655 * create a targetparam object and use its name
3656 * for param lookup.
3657 */
3658 if (rtn == 0) {
3659 name = isp->sess_name;
3660 } else {
3661 name =
3662 iscsi_targetparam_get_name(auth->a_oid);
3663 }
3664 }
3665
3666 if (name == NULL) {
3667 rtn = EFAULT;
3668 break;
3669 }
3670
3671 if (persistent_auth_get((char *)name, auth) == B_TRUE) {
3672 /*
3673 * Restore the value for overridden (and bogus) oid.
3674 */
3675 auth->a_oid = old_oid;
3676 rtn = ddi_copyout(auth, (caddr_t)arg,
3677 sizeof (*auth), mode);
3678 } else {
3679 rtn = EIO;
3680 }
3681
3682 kmem_free(auth, sizeof (*auth));
3683 break;
3684
3685 /*
3686 * ISCSI_AUTH_SET -
3687 */
3688 case ISCSI_AUTH_SET:
3689 auth = (iscsi_auth_props_t *)kmem_zalloc(sizeof (*auth),
3690 KM_SLEEP);
3691 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) {
3692 kmem_free(auth, sizeof (*auth));
3693 rtn = EFAULT;
3694 break;
3695 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) {
3696 kmem_free(auth, sizeof (*auth));
3697 rtn = EINVAL;
3698 break;
3699 }
3700
3701 if (auth->a_oid == ihp->hba_oid) {
3702 name = ihp->hba_name;
3703 } else {
3704 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3705 /*
3706 * If the oid does represent a session check to see
3707 * if it is a target oid. If so, return the target's
3708 * associated session.
3709 */
3710 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp);
3711 if (rtn != 0) {
3712 rtn = iscsi_sess_get_by_target(auth->a_oid,
3713 ihp, &isp);
3714 }
3715 rw_exit(&ihp->hba_sess_list_rwlock);
3716
3717 /*
3718 * If rtn is zero then we have found an
3719 * existing session. Use the session name to
3720 * do param lookup. If rtn is non-zero then
3721 * create a targetparam object and use its name
3722 * for param lookup.
3723 */
3724 if (rtn == 0) {
3725 name = isp->sess_name;
3726 } else {
3727 name =
3728 iscsi_targetparam_get_name(auth->a_oid);
3729 rtn = 0;
3730 }
3731 }
3732
3733 if (name == NULL) {
3734 rtn = EFAULT;
3735 } else if (persistent_auth_set((char *)name, auth)
3736 == B_FALSE) {
3737 rtn = EIO;
3738 }
3739
3740 kmem_free(auth, sizeof (*auth));
3741 break;
3742
3743 /*
3744 * ISCSI_AUTH_CLEAR -
3745 */
3746 case ISCSI_AUTH_CLEAR:
3747 auth = (iscsi_auth_props_t *)kmem_alloc(sizeof (*auth),
3748 KM_SLEEP);
3749 if (ddi_copyin((caddr_t)arg, auth, sizeof (*auth), mode)) {
3750 kmem_free(auth, sizeof (*auth));
3751 rtn = EFAULT;
3752 break;
3753 } else if (auth->a_vers != ISCSI_INTERFACE_VERSION) {
3754 kmem_free(auth, sizeof (*auth));
3755 rtn = EINVAL;
3756 break;
3757 }
3758
3759 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3760 /*
3761 * If the oid does represent a session check to see
3762 * if it is a target oid. If so, return the target's
3763 * associated session.
3764 */
3765 rtn = iscsi_sess_get(auth->a_oid, ihp, &isp);
3766 if (rtn != 0) {
3767 rtn = iscsi_sess_get_by_target(auth->a_oid, ihp, &isp);
3768 }
3769 rw_exit(&ihp->hba_sess_list_rwlock);
3770
3771 /*
3772 * If rtn is zero then we have found an
3773 * existing session. Use the session name to
3774 * do param lookup. If rtn is non-zero then
3775 * create a targetparam object and use its name
3776 * for param lookup.
3777 */
3778 if (rtn == 0) {
3779 name = isp->sess_name;
3780 } else {
3781 name =
3782 iscsi_targetparam_get_name(auth->a_oid);
3783 rtn = 0;
3784 discovered = B_FALSE;
3785 }
3786
3787 if (name == NULL) {
3788 rtn = EFAULT;
3789 break;
3790 }
3791
3792 if (persistent_auth_clear((char *)name) == B_FALSE) {
3793 rtn = EIO;
3794 }
3795
3796 /*
3797 * ISCSI_TARGET_PARAM_CLEAR, ISCSI_CHAP_CLEAR and
3798 * ISCSI_AUTH_CLEAR ioctl are called sequentially to remove
3799 * target parameters. Here, the target that is not discovered
3800 * by initiator should be removed from the iscsi_targets list
3801 * residing in the memory.
3802 */
3803 if (discovered == B_FALSE) {
3804 (void) iscsi_targetparam_remove_target(auth->a_oid);
3805 }
3806
3807 kmem_free(auth, sizeof (*auth));
3808 break;
3809
3810 /*
3811 * ISCSI_DB_DUMP -
3812 */
3813 case ISCSI_DB_DUMP:
3814 persistent_dump_data();
3815 break;
3816
3817 case ISCSI_USCSI:
3818
3819 #ifdef _MULTI_DATAMODEL
3820 model = ddi_model_convert_from(mode & FMODELS);
3821 switch (model) {
3822 case DDI_MODEL_ILP32:
3823
3824 if (ddi_copyin((caddr_t)arg, &iu32_caller,
3825 sizeof (iscsi_uscsi32_t), mode)) {
3826 rtn = EFAULT;
3827 break;
3828 }
3829
3830 /* perform conversion from 32 -> 64 */
3831 iu_caller.iu_vers = iu32_caller.iu_vers;
3832 iu_caller.iu_oid = iu32_caller.iu_oid;
3833 iu_caller.iu_tpgt = iu32_caller.iu_tpgt;
3834 iu_caller.iu_len = iu32_caller.iu_len;
3835 iu_caller.iu_lun = iu32_caller.iu_lun;
3836 uscsi_cmd32touscsi_cmd((&iu32_caller.iu_ucmd),
3837 (&iu_caller.iu_ucmd));
3838
3839 break;
3840 case DDI_MODEL_NONE:
3841 if (ddi_copyin((caddr_t)arg, &iu_caller,
3842 sizeof (iscsi_uscsi_t), mode)) {
3843 rtn = EFAULT;
3844 break;
3845 }
3846 break;
3847 default:
3848 ASSERT(FALSE);
3849 rtn = EINVAL;
3850 break;
3851 }
3852 #endif /* _MULTI_DATAMODEL */
3853
3854 /* If failures earlier break */
3855 if (rtn != 0) {
3856 break;
3857 }
3858
3859 /* copy from caller to internel cmd */
3860 bcopy(&iu_caller, &iu, sizeof (iu));
3861
3862 if (iu.iu_vers != ISCSI_INTERFACE_VERSION) {
3863 rtn = EINVAL;
3864 break;
3865 }
3866 /*
3867 * Check to see if oid references a target-param oid. If so,
3868 * find the associated session oid before getting lu list.
3869 */
3870 if (iscsi_targetparam_get_name(iu.iu_oid) != NULL) {
3871 for (isp = ihp->hba_sess_list; isp; isp =
3872 isp->sess_next) {
3873 if (isp->sess_target_oid == iu.iu_oid) {
3874 target_oid = isp->sess_oid;
3875 break;
3876 }
3877 }
3878 } else {
3879 target_oid = iu.iu_oid;
3880 }
3881
3882 /* make sure we have a matching session for this command */
3883 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
3884 rtn = iscsi_sess_get(target_oid, ihp, &isp);
3885 if (rtn != 0) {
3886 rtn = iscsi_sess_get_by_target(target_oid, ihp,
3887 &isp);
3888 if (rtn != 0) {
3889 rw_exit(&ihp->hba_sess_list_rwlock);
3890 rtn = EFAULT;
3891 break;
3892 }
3893 }
3894 /*
3895 * If a caller buffer is present allocate duplicate
3896 * kernel space and copyin caller memory.
3897 */
3898 if (iu.iu_ucmd.uscsi_buflen > 0) {
3899 iu.iu_ucmd.uscsi_bufaddr = (caddr_t)kmem_alloc(
3900 iu.iu_ucmd.uscsi_buflen, KM_SLEEP);
3901 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_bufaddr,
3902 iu.iu_ucmd.uscsi_bufaddr,
3903 iu.iu_ucmd.uscsi_buflen, mode)) {
3904 rw_exit(&ihp->hba_sess_list_rwlock);
3905 rtn = EFAULT;
3906 break;
3907 }
3908 }
3909
3910 /*
3911 * If a caller cdb is present allocate duplicate
3912 * kernel space and copyin caller memory.
3913 */
3914 if (iu.iu_ucmd.uscsi_cdblen > 0) {
3915 iu.iu_ucmd.uscsi_cdb = (caddr_t)kmem_alloc(
3916 iu_caller.iu_ucmd.uscsi_cdblen, KM_SLEEP);
3917 if (ddi_copyin(iu_caller.iu_ucmd.uscsi_cdb,
3918 iu.iu_ucmd.uscsi_cdb,
3919 iu.iu_ucmd.uscsi_cdblen, mode)) {
3920 if (iu.iu_ucmd.uscsi_buflen > 0) {
3921 kmem_free(iu.iu_ucmd.uscsi_bufaddr,
3922 iu_caller.iu_ucmd.uscsi_buflen);
3923 }
3924 rw_exit(&ihp->hba_sess_list_rwlock);
3925 rtn = EFAULT;
3926 break;
3927 }
3928 }
3929
3930 /*
3931 * If a caller request sense is present allocate
3932 * duplicate kernel space. No need to copyin.
3933 */
3934 if (iu.iu_ucmd.uscsi_rqlen > 0) {
3935 iu.iu_ucmd.uscsi_rqbuf = (caddr_t)kmem_alloc(
3936 iu.iu_ucmd.uscsi_rqlen, KM_SLEEP);
3937 }
3938
3939 /* issue passthru to io path handler */
3940 rtn = iscsi_handle_passthru(isp, iu.iu_lun, &iu.iu_ucmd);
3941 if (rtn != 0) {
3942 rtn = EFAULT;
3943 }
3944
3945 /*
3946 * If the caller had a buf we need to do a copyout
3947 * and free the kernel memory
3948 */
3949 if (iu.iu_ucmd.uscsi_buflen > 0) {
3950 if (ddi_copyout(iu.iu_ucmd.uscsi_bufaddr,
3951 iu_caller.iu_ucmd.uscsi_bufaddr,
3952 iu.iu_ucmd.uscsi_buflen, mode) != 0) {
3953 rtn = EFAULT;
3954 }
3955 kmem_free(iu.iu_ucmd.uscsi_bufaddr,
3956 iu.iu_ucmd.uscsi_buflen);
3957 }
3958
3959 /* We need to free kernel cdb, no need to copyout */
3960 if (iu.iu_ucmd.uscsi_cdblen > 0) {
3961 kmem_free(iu.iu_ucmd.uscsi_cdb,
3962 iu.iu_ucmd.uscsi_cdblen);
3963 }
3964
3965 /*
3966 * If the caller had a request sense we need to
3967 * do a copyout and free the kernel memory
3968 */
3969 if (iu.iu_ucmd.uscsi_rqlen > 0) {
3970 if (ddi_copyout(iu.iu_ucmd.uscsi_rqbuf,
3971 iu_caller.iu_ucmd.uscsi_rqbuf,
3972 iu.iu_ucmd.uscsi_rqlen - iu.iu_ucmd.uscsi_rqresid,
3973 mode) != 0) {
3974 rtn = EFAULT;
3975 }
3976 kmem_free(iu.iu_ucmd.uscsi_rqbuf,
3977 iu.iu_ucmd.uscsi_rqlen);
3978 }
3979
3980 #ifdef _MULTI_DATAMODEL
3981 switch (model = ddi_model_convert_from(mode & FMODELS)) {
3982 case DDI_MODEL_ILP32:
3983 if (iu.iu_ucmd.uscsi_status != 0) {
3984 iu32_caller.iu_ucmd.uscsi_status =
3985 iu.iu_ucmd.uscsi_status;
3986 iu32_caller.iu_ucmd.uscsi_rqresid =
3987 iu.iu_ucmd.uscsi_rqresid;
3988 }
3989 iu32_caller.iu_ucmd.uscsi_resid =
3990 iu.iu_ucmd.uscsi_resid;
3991 if (ddi_copyout((void *)&iu32_caller, (caddr_t)arg,
3992 sizeof (iscsi_uscsi32_t), mode) != 0) {
3993 rtn = EFAULT;
3994 }
3995 break;
3996 case DDI_MODEL_NONE:
3997 if (iu.iu_ucmd.uscsi_status != 0) {
3998 iu_caller.iu_ucmd.uscsi_status =
3999 iu.iu_ucmd.uscsi_status;
4000 iu_caller.iu_ucmd.uscsi_rqresid =
4001 iu.iu_ucmd.uscsi_rqresid;
4002 }
4003 iu_caller.iu_ucmd.uscsi_resid = iu.iu_ucmd.uscsi_resid;
4004 if (ddi_copyout((void *)&iu_caller, (caddr_t)arg,
4005 sizeof (iscsi_uscsi_t), mode) != 0) {
4006 rtn = EFAULT;
4007 }
4008 break;
4009 default:
4010 ASSERT(FALSE);
4011 }
4012 #endif /* _MULTI_DATAMODEL */
4013 rw_exit(&ihp->hba_sess_list_rwlock);
4014 break;
4015
4016 case ISCSI_SMF_ONLINE:
4017 if (ddi_copyin((caddr_t)arg, &did, sizeof (int), mode) != 0) {
4018 rtn = EFAULT;
4019 break;
4020 }
4021 /* just a theoretical case */
4022 if (ihp->hba_persistent_loaded == B_FALSE) {
4023 rtn = EFAULT;
4024 break;
4025 }
4026
4027 /* doesn't need to overwrite the status anymore */
4028 mutex_enter(&ihp->hba_service_lock);
4029 if (ihp->hba_service_status_overwrite == B_TRUE) {
4030 ihp->hba_service_status = ISCSI_SERVICE_DISABLED;
4031 ihp->hba_service_status_overwrite = B_FALSE;
4032 }
4033 mutex_exit(&ihp->hba_service_lock);
4034
4035 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_ENABLED) ==
4036 B_FALSE) {
4037 break;
4038 }
4039
4040 rval = iscsi_door_bind(did);
4041 if (rval == B_TRUE) {
4042 rval = iscsid_start(ihp);
4043 if (rval == B_FALSE) {
4044 iscsi_door_unbind();
4045 }
4046 }
4047
4048 if (rval == B_TRUE) {
4049 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_ENABLED);
4050 } else {
4051 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED);
4052 rtn = EFAULT;
4053 }
4054
4055 break;
4056
4057 case ISCSI_SMF_OFFLINE:
4058 if (iscsi_enter_service_zone(ihp, ISCSI_SERVICE_DISABLED)
4059 == B_FALSE) {
4060 break;
4061 }
4062
4063 rval = iscsid_stop(ihp);
4064 iscsi_door_unbind();
4065
4066 iscsi_exit_service_zone(ihp, ISCSI_SERVICE_DISABLED);
4067
4068 if (ddi_copyout((void *)&rval, (caddr_t)arg,
4069 sizeof (boolean_t), mode) != 0) {
4070 rtn = EFAULT;
4071 }
4072
4073 break;
4074
4075 case ISCSI_SMF_GET:
4076 mutex_enter(&ihp->hba_service_lock);
4077 while (ihp->hba_service_status ==
4078 ISCSI_SERVICE_TRANSITION) {
4079 cv_wait(&ihp->hba_service_cv,
4080 &ihp->hba_service_lock);
4081 }
4082 if (ddi_copyout((void *)&ihp->hba_service_status,
4083 (caddr_t)arg, sizeof (boolean_t), mode) != 0) {
4084 rtn = EFAULT;
4085 }
4086 mutex_exit(&ihp->hba_service_lock);
4087 break;
4088
4089 case ISCSI_DISCOVERY_EVENTS:
4090 /*
4091 * If discovery has not been completed and not in progress,
4092 * poke the discovery methods
4093 */
4094 mutex_enter(&ihp->hba_discovery_events_mutex);
4095 method = ihp->hba_discovery_events;
4096 if ((method != ISCSI_ALL_DISCOVERY_METHODS) &&
4097 (ihp->hba_discovery_in_progress == B_FALSE)) {
4098 ihp->hba_discovery_in_progress = B_TRUE;
4099 mutex_exit(&ihp->hba_discovery_events_mutex);
4100 iscsid_poke_discovery(ihp, iSCSIDiscoveryMethodUnknown);
4101 mutex_enter(&ihp->hba_discovery_events_mutex);
4102 ihp->hba_discovery_in_progress = B_FALSE;
4103 method = ihp->hba_discovery_events;
4104 }
4105 mutex_exit(&ihp->hba_discovery_events_mutex);
4106
4107 if (ddi_copyout((void *)&method, (caddr_t)arg,
4108 sizeof (method), mode) != 0)
4109 rtn = EFAULT;
4110 break;
4111
4112 /*
4113 * ISCSI_SENDTGTS_GET --
4114 */
4115 case ISCSI_SENDTGTS_GET:
4116 stl_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode,
4117 sizeof (*stl_hdr));
4118 if (stl_hdr == NULL) {
4119 rtn = EFAULT;
4120 break;
4121 }
4122
4123 if (stl_hdr->stl_entry.e_vers != ISCSI_INTERFACE_VERSION) {
4124 rtn = EINVAL;
4125 kmem_free(stl_hdr, sizeof (*stl_hdr));
4126 break;
4127 }
4128
4129 /* calculate how much memory user allocated for SendTgts */
4130 stl_sz = sizeof (*stl_hdr);
4131 if (stl_hdr->stl_in_cnt > 0) {
4132 stl_sz += ((stl_hdr->stl_in_cnt - 1) *
4133 sizeof (iscsi_sendtgts_entry_t));
4134 }
4135
4136 /* allocate local SendTgts list of the same size */
4137 istl = kmem_zalloc(stl_sz, KM_SLEEP);
4138 bcopy(stl_hdr, istl, sizeof (*stl_hdr));
4139 kmem_free(stl_hdr, sizeof (*stl_hdr));
4140
4141 /* lock interface so only one SendTargets operation occurs */
4142 sema_p(&ihp->hba_sendtgts_semaphore);
4143
4144 rtn = iscsi_ioctl_sendtgts_get(ihp, istl);
4145
4146 if (rtn == 0) {
4147 rtn = iscsi_ioctl_copyout(istl, stl_sz,
4148 (caddr_t)arg, mode);
4149 }
4150
4151 /* release lock to allow another SendTargets discovery */
4152 sema_v(&ihp->hba_sendtgts_semaphore);
4153
4154 break;
4155
4156 /*
4157 * ISCSI_ISNS_SERVER_GET --
4158 */
4159 case ISCSI_ISNS_SERVER_GET:
4160 server_pg_list_hdr = iscsi_ioctl_copyin((caddr_t)arg, mode,
4161 sizeof (*server_pg_list_hdr));
4162 if (server_pg_list_hdr == NULL) {
4163 rtn = EFAULT;
4164 break;
4165 }
4166
4167 /* If iSNS discovery mode is not set, return with zero entry */
4168 method = persistent_disc_meth_get();
4169 if ((method & iSCSIDiscoveryMethodISNS) == 0) {
4170 kmem_free(server_pg_list_hdr,
4171 sizeof (*server_pg_list_hdr));
4172 server_pg_list_hdr = NULL;
4173 rtn = EACCES;
4174 break;
4175 }
4176
4177 initiator_node_name = kmem_zalloc(ISCSI_MAX_NAME_LEN, KM_SLEEP);
4178 if (persistent_initiator_name_get(initiator_node_name,
4179 ISCSI_MAX_NAME_LEN) != B_TRUE) {
4180 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
4181 initiator_node_name = NULL;
4182 kmem_free(server_pg_list_hdr,
4183 sizeof (*server_pg_list_hdr));
4184 server_pg_list_hdr = NULL;
4185 rtn = EIO;
4186 break;
4187 }
4188 if (strlen(initiator_node_name) == 0) {
4189 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
4190 initiator_node_name = NULL;
4191 kmem_free(server_pg_list_hdr,
4192 sizeof (*server_pg_list_hdr));
4193 server_pg_list_hdr = NULL;
4194 rtn = EIO;
4195 break;
4196 }
4197
4198 initiator_node_alias = kmem_zalloc(
4199 ISCSI_MAX_NAME_LEN, KM_SLEEP);
4200 if (persistent_alias_name_get(initiator_node_alias,
4201 ISCSI_MAX_NAME_LEN) != B_TRUE) {
4202 initiator_node_alias[0] = '\0';
4203 }
4204 rtn = isns_query_one_server(&(server_pg_list_hdr->addr),
4205 ihp->hba_isid,
4206 (uint8_t *)initiator_node_name,
4207 (uint8_t *)initiator_node_alias,
4208 ISNS_INITIATOR_NODE_TYPE,
4209 &pg_list);
4210 if (rtn != isns_ok || pg_list == NULL) {
4211 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
4212 initiator_node_name = NULL;
4213 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN);
4214 initiator_node_alias = NULL;
4215 kmem_free(server_pg_list_hdr,
4216 sizeof (*server_pg_list_hdr));
4217 server_pg_list_hdr = NULL;
4218 rtn = EIO;
4219 break;
4220 }
4221
4222 /*
4223 * pg_list_sz is the size of the pg_list returned from the
4224 * isns_query_all
4225 *
4226 * pg_sz_copy_out is the size of the pg_list we are going to
4227 * return back to the caller
4228 *
4229 * server_pg_list_sz is total amount of data we are returning
4230 * back to the caller
4231 */
4232 pg_list->pg_in_cnt =
4233 server_pg_list_hdr->addr_port_list.pg_in_cnt;
4234 pg_list_sz = sizeof (isns_portal_group_list_t);
4235 if (pg_list->pg_out_cnt > 0) {
4236 pg_list_sz += (pg_list->pg_out_cnt - 1) *
4237 sizeof (isns_portal_group_t);
4238 }
4239 /*
4240 * check if caller passed in a buffer with enough space
4241 * if there isn't enough space, fill the caller's buffer with
4242 * as much information as possible.
4243 *
4244 * if pg_out_cnt > pg_in_cnt, pg_out_cnt will be returned with
4245 * the total number of targets found
4246 *
4247 * if pg_out_cnt < pg_in_cnt, pg_out_cnt will be the number
4248 * of targets returned
4249 */
4250 if (pg_list->pg_in_cnt < pg_list->pg_out_cnt) {
4251 pg_sz_copy_out = sizeof (isns_portal_group_list_t);
4252 if (pg_list->pg_in_cnt > 0) {
4253 pg_sz_copy_out += (pg_list->pg_in_cnt - 1) *
4254 sizeof (isns_portal_group_t);
4255 }
4256 server_pg_list_sz =
4257 sizeof (isns_server_portal_group_list_t);
4258 if (pg_list->pg_in_cnt > 0) {
4259 server_pg_list_sz += (pg_list->pg_in_cnt - 1) *
4260 sizeof (isns_portal_group_t);
4261 }
4262 } else {
4263 pg_sz_copy_out = pg_list_sz;
4264 server_pg_list_sz =
4265 sizeof (isns_server_portal_group_list_t);
4266 if (pg_list->pg_out_cnt > 0) {
4267 server_pg_list_sz += (pg_list->pg_out_cnt - 1) *
4268 sizeof (isns_portal_group_t);
4269 }
4270 }
4271
4272 server_pg_list = (isns_server_portal_group_list_t *)kmem_zalloc(
4273 server_pg_list_sz, KM_SLEEP);
4274
4275 bcopy(&(server_pg_list_hdr->addr), &(server_pg_list->addr),
4276 sizeof (server_pg_list->addr));
4277 bcopy(pg_list, &server_pg_list->addr_port_list, pg_sz_copy_out);
4278
4279 if (ddi_copyout(server_pg_list, (caddr_t)arg, server_pg_list_sz,
4280 mode) != 0) {
4281 rtn = EFAULT;
4282 }
4283 DTRACE_PROBE1(iscsi_ioctl_iscsi_isns_server_get_pg_sz,
4284 int, pg_list_sz);
4285 kmem_free(initiator_node_name, ISCSI_MAX_NAME_LEN);
4286 initiator_node_name = NULL;
4287 kmem_free(initiator_node_alias, ISCSI_MAX_NAME_LEN);
4288 initiator_node_alias = NULL;
4289 kmem_free(pg_list, pg_list_sz);
4290 pg_list = NULL;
4291 kmem_free(server_pg_list, server_pg_list_sz);
4292 server_pg_list = NULL;
4293 kmem_free(server_pg_list_hdr, sizeof (*server_pg_list_hdr));
4294 server_pg_list_hdr = NULL;
4295 break;
4296
4297 /*
4298 * ISCSI_GET_CONFIG_SESSIONS --
4299 */
4300 case ISCSI_GET_CONFIG_SESSIONS:
4301 /* FALLTHRU */
4302
4303 case ISCSI_SET_CONFIG_SESSIONS:
4304 size = sizeof (*ics);
4305 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size);
4306 if (ics == NULL) {
4307 rtn = EFAULT;
4308 break;
4309 }
4310
4311 /* verify version infomration */
4312 if (ics->ics_ver != ISCSI_INTERFACE_VERSION) {
4313 rtn = EINVAL;
4314 kmem_free(ics, size);
4315 ics = NULL;
4316 break;
4317 }
4318
4319 /* Check to see if we need to copy in more memory */
4320 if (ics->ics_in > 1) {
4321 /* record correct size */
4322 size = ISCSI_SESSION_CONFIG_SIZE(ics->ics_in);
4323 /* free old buffer */
4324 kmem_free(ics, sizeof (*ics));
4325
4326 /* copy in complete buffer size */
4327 ics = iscsi_ioctl_copyin((caddr_t)arg, mode, size);
4328 if (ics == NULL) {
4329 rtn = EFAULT;
4330 break;
4331 }
4332 }
4333
4334 /* switch action based on get or set */
4335 if (cmd == ISCSI_GET_CONFIG_SESSIONS) {
4336 /* get */
4337 rtn = iscsi_ioctl_get_config_sess(ihp, ics);
4338 if (rtn == 0) {
4339 /* copyout data for gets */
4340 rtn = iscsi_ioctl_copyout(ics, size,
4341 (caddr_t)arg, mode);
4342 } else {
4343 kmem_free(ics, size);
4344 ics = NULL;
4345 }
4346 } else {
4347 /* set */
4348 rtn = iscsi_ioctl_set_config_sess(ihp, ics);
4349 if (iscsiboot_prop) {
4350 if (iscsi_cmp_boot_sess_oid(ihp,
4351 ics->ics_oid)) {
4352 /*
4353 * found active session for this object
4354 * or this is initiator object
4355 * with mpxio enabled
4356 */
4357 if (!iscsi_reconfig_boot_sess(ihp)) {
4358 kmem_free(ics, size);
4359 ics = NULL;
4360 rtn = EINVAL;
4361 break;
4362 }
4363 }
4364 }
4365 kmem_free(ics, size);
4366 ics = NULL;
4367 }
4368 break;
4369
4370 case ISCSI_IS_ACTIVE:
4371 /*
4372 * dhcpagent calls here to check if there are
4373 * active iSCSI sessions
4374 */
4375 instance = 0;
4376 if (iscsiboot_prop) {
4377 instance = 1;
4378 }
4379 if (!instance) {
4380 rw_enter(&ihp->hba_sess_list_rwlock,
4381 RW_READER);
4382 for (isp = ihp->hba_sess_list; isp;
4383 isp = isp->sess_next) {
4384 if ((isp->sess_state ==
4385 ISCSI_SESS_STATE_LOGGED_IN) &&
4386 (isp->sess_lun_list !=
4387 NULL)) {
4388 instance = 1;
4389 break;
4390 }
4391 }
4392 rw_exit(&ihp->hba_sess_list_rwlock);
4393 }
4394 size = sizeof (instance);
4395 if (ddi_copyout(&instance, (caddr_t)arg, size,
4396 mode) != 0) {
4397 rtn = EFAULT;
4398 }
4399 break;
4400
4401 case ISCSI_BOOTPROP_GET:
4402 size = sizeof (*bootProp);
4403 bootProp = iscsi_ioctl_copyin((caddr_t)arg, mode, size);
4404 if (bootProp == NULL) {
4405 rtn = EFAULT;
4406 break;
4407 }
4408 bootProp->hba_mpxio_enabled =
4409 iscsi_chk_bootlun_mpxio(ihp);
4410 if (iscsiboot_prop == NULL) {
4411 bootProp->iscsiboot = 0;
4412 rtn = iscsi_ioctl_copyout(bootProp, size,
4413 (caddr_t)arg, mode);
4414 break;
4415 } else {
4416 bootProp->iscsiboot = 1;
4417 }
4418
4419 if (iscsiboot_prop->boot_init.ini_name != NULL) {
4420 (void) strncpy((char *)bootProp->ini_name.n_name,
4421 (char *)iscsiboot_prop->boot_init.ini_name,
4422 ISCSI_MAX_NAME_LEN);
4423 }
4424 if (iscsiboot_prop->boot_init.ini_chap_name != NULL) {
4425 bootProp->auth.a_auth_method = authMethodCHAP;
4426 (void) strncpy((char *)bootProp->ini_chap.c_user,
4427 (char *)iscsiboot_prop->boot_init.ini_chap_name,
4428 ISCSI_MAX_NAME_LEN);
4429 (void) strncpy((char *)bootProp->ini_chap.c_secret,
4430 (char *)iscsiboot_prop->boot_init.ini_chap_sec,
4431 ISCSI_CHAP_SECRET_LEN);
4432 if (iscsiboot_prop->boot_tgt.tgt_chap_name !=
4433 NULL) {
4434 bootProp->auth.a_bi_auth = B_TRUE;
4435 } else {
4436 bootProp->auth.a_bi_auth = B_FALSE;
4437 }
4438 }
4439 if (iscsiboot_prop->boot_tgt.tgt_name != NULL) {
4440 (void) strncpy((char *)bootProp->tgt_name.n_name,
4441 (char *)iscsiboot_prop->boot_tgt.tgt_name,
4442 ISCSI_MAX_NAME_LEN);
4443 }
4444 if (iscsiboot_prop->boot_tgt.tgt_chap_name != NULL) {
4445 (void) strncpy((char *)bootProp->tgt_chap.c_user,
4446 (char *)iscsiboot_prop->boot_tgt.tgt_chap_name,
4447 ISCSI_MAX_NAME_LEN);
4448 (void) strncpy((char *)bootProp->tgt_chap.c_secret,
4449 (char *)iscsiboot_prop->boot_tgt.tgt_chap_sec,
4450 ISCSI_CHAP_SECRET_LEN);
4451 }
4452
4453 rtn = iscsi_ioctl_copyout(bootProp, size, (caddr_t)arg, mode);
4454 break;
4455
4456 case ISCSI_TARGET_REENUM:
4457 size = sizeof (iscsi_reen_t);
4458 reenum = (iscsi_reen_t *)kmem_alloc(size, KM_SLEEP);
4459
4460 if (ddi_copyin((caddr_t)arg, reenum, size, mode) != 0) {
4461 rtn = EFAULT;
4462 kmem_free(reenum, size);
4463 break;
4464 }
4465 if (reenum->re_ver != ISCSI_INTERFACE_VERSION) {
4466 rtn = EINVAL;
4467 kmem_free(reenum, size);
4468 break;
4469 }
4470 rw_enter(&ihp->hba_sess_list_rwlock, RW_READER);
4471 rtn = iscsi_sess_get(reenum->re_oid, ihp, &isp);
4472 if (rtn != 0) {
4473 rtn = iscsi_sess_get_by_target(
4474 reenum->re_oid, ihp, &isp);
4475 }
4476
4477 if (rtn != 0) {
4478 rw_exit(&ihp->hba_sess_list_rwlock);
4479 kmem_free(reenum, size);
4480 break;
4481 }
4482 kmem_free(reenum, size);
4483 if (isp->sess_type == ISCSI_SESS_TYPE_NORMAL) {
4484 rw_enter(&isp->sess_state_rwlock, RW_READER);
4485 if ((isp->sess_state ==
4486 ISCSI_SESS_STATE_LOGGED_IN) &&
4487 (iscsi_sess_enum_request(isp, B_TRUE,
4488 isp->sess_state_event_count)
4489 == ISCSI_SESS_ENUM_SUBMITTED)) {
4490 (void) iscsi_sess_enum_query(isp);
4491 }
4492 rw_exit(&isp->sess_state_rwlock);
4493 }
4494 rw_exit(&ihp->hba_sess_list_rwlock);
4495 break;
4496
4497 case ISCSI_TUNABLE_PARAM_SET:
4498 tpss = (iscsi_tunable_object_t *)kmem_alloc(sizeof (*tpss),
4499 KM_SLEEP);
4500 if (ddi_copyin((caddr_t)arg, tpss, sizeof (*tpss), mode)) {
4501 rtn = EFAULT;
4502 kmem_free(tpss, sizeof (*tpss));
4503 break;
4504 }
4505 rtn = iscsi_ioctl_set_tunable_param(ihp, tpss);
4506 kmem_free(tpss, sizeof (*tpss));
4507 break;
4508
4509 case ISCSI_TUNABLE_PARAM_GET:
4510 tpsg = (iscsi_tunable_object_t *)kmem_alloc(sizeof (*tpsg),
4511 KM_SLEEP);
4512 if (ddi_copyin((caddr_t)arg, tpsg, sizeof (*tpsg), mode)) {
4513 rtn = EFAULT;
4514 kmem_free(tpsg, sizeof (*tpsg));
4515 break;
4516 }
4517 if (tpsg->t_oid == ihp->hba_oid) {
4518 /* initiator */
4519 name = ihp->hba_name;
4520 if (iscsi_get_persisted_tunable_param((uchar_t *)name,
4521 tpsg) == 1) {
4522 /*
4523 * no persisted tunable parameters found
4524 * for iscsi initiator, use default tunable
4525 * params for initiator node.
4526 */
4527 iscsi_get_tunable_default(tpsg);
4528 }
4529 } else {
4530 /* check whether it is a target oid */
4531 name = iscsi_targetparam_get_name(tpsg->t_oid);
4532 if (name == NULL) {
4533 /* invalid node name */
4534 rtn = EINVAL;
4535 kmem_free(tpsg, sizeof (*tpsg));
4536 break;
4537 }
4538 if (iscsi_get_persisted_tunable_param((uchar_t *)name,
4539 tpsg) == 1) {
4540 /*
4541 * no persisted tunable parameters found for
4542 * iscsi target, use initiator's configure.
4543 */
4544 if (iscsi_get_persisted_tunable_param(
4545 (uchar_t *)ihp->hba_name, tpsg) == -1) {
4546 /*
4547 * No initiator tunable parameters set
4548 * use default value for target
4549 */
4550 iscsi_get_tunable_default(tpsg);
4551 }
4552 }
4553 }
4554
4555 if (ddi_copyout(tpsg, (caddr_t)arg,
4556 sizeof (iscsi_tunable_object_t), mode) != 0) {
4557 rtn = EFAULT;
4558 }
4559 kmem_free(tpsg, sizeof (*tpsg));
4560 break;
4561
4562 default:
4563 rtn = ENOTTY;
4564 cmn_err(CE_NOTE, "unrecognized ioctl 0x%x", cmd);
4565 } /* end of ioctl type switch/cases */
4566
4567 if ((cmd != ISCSI_SMF_ONLINE) && (cmd != ISCSI_SMF_OFFLINE) &&
4568 (cmd != ISCSI_SMF_GET)) {
4569 /* other cmds need to release the service */
4570 iscsi_client_release_service(ihp);
4571 }
4572
4573 return (rtn);
4574 }
4575
4576 /*
4577 * +--------------------------------------------------------------------+
4578 * | End of cb_ops routines |
4579 * +--------------------------------------------------------------------+
4580 */
4581
4582
4583 /*
4584 * +--------------------------------------------------------------------+
4585 * | Common scsi_tran support routines |
4586 * +--------------------------------------------------------------------+
4587 */
4588
4589 /*
4590 * iscsi_i_commoncap -- SCSA host adapter get/set capability routines.
4591 *
4592 * Need to determine if any of these can be determined through the iSCSI
4593 * protocol. For now just return error on most.
4594 */
4595 /* ARGSUSED */
4596 static int
iscsi_i_commoncap(struct scsi_address * ap,char * cap,int val,int tgtonly,int doset)4597 iscsi_i_commoncap(struct scsi_address *ap, char *cap, int val,
4598 int tgtonly, int doset)
4599 {
4600 int rtn;
4601 int cidx;
4602 iscsi_lun_t *ilp;
4603
4604 ASSERT((ap)->a_hba_tran->tran_hba_private != NULL);
4605 ilp = (iscsi_lun_t *)((ap)->a_hba_tran->tran_tgt_private);
4606 ASSERT(ilp != NULL);
4607
4608 if (cap == (char *)0) {
4609 return (FALSE);
4610 }
4611
4612 cidx = scsi_hba_lookup_capstr(cap);
4613 if (cidx == -1) {
4614 return (cidx);
4615 }
4616
4617 /*
4618 * Process setcap request.
4619 */
4620 if (doset) {
4621 /*
4622 * At present, we can only set binary (0/1) values
4623 */
4624 switch (cidx) {
4625 case SCSI_CAP_LUN_RESET:
4626 if (val) {
4627 ilp->lun_cap |= ISCSI_LUN_CAP_RESET;
4628 } else {
4629 ilp->lun_cap &= ~ISCSI_LUN_CAP_RESET;
4630 }
4631 rtn = TRUE;
4632 break;
4633 default:
4634 /*
4635 * None of these are settable via
4636 * the capability interface.
4637 */
4638 rtn = FALSE;
4639 break;
4640 }
4641
4642 /*
4643 * Process getcap request.
4644 */
4645 } else {
4646 switch (cidx) {
4647 case SCSI_CAP_DMA_MAX:
4648 /* no DMA, Psuedo value */
4649 rtn = INT32_MAX;
4650 break;
4651 case SCSI_CAP_INITIATOR_ID:
4652 rtn = 7;
4653 break;
4654 case SCSI_CAP_ARQ:
4655 case SCSI_CAP_RESET_NOTIFICATION:
4656 case SCSI_CAP_TAGGED_QING:
4657 rtn = TRUE;
4658 break;
4659 case SCSI_CAP_SCSI_VERSION:
4660 rtn = SCSI_VERSION_3;
4661 break;
4662 case SCSI_CAP_INTERCONNECT_TYPE:
4663 rtn = INTERCONNECT_FABRIC;
4664 break;
4665 case SCSI_CAP_LUN_RESET:
4666 rtn = ((ilp->lun_cap & ISCSI_LUN_CAP_RESET) != 0) ?
4667 TRUE : FALSE;
4668 break;
4669 case SCSI_CAP_CDB_LEN:
4670 /*
4671 * iSCSI RFC 3720 defines a default 16 byte
4672 * CDB as part of the Basic Header Segment
4673 * (BHS) (10.2.1) and allows for an Additional
4674 * Header Segment (AHS) Length of 255 * 4
4675 * (10.2.1.5). The AHS length can be used
4676 * for different purposes two of which are
4677 * Extended CDB ADS (10.2.2.3) and Bidirectional
4678 * Expected Read-Data Length AHS (10.2.2.4).
4679 * The largest header of these consumes is
4680 * 32 bytes. So the total Max CDB Length is
4681 * 16 + ((255 * 4 ) - 32) = 1004.
4682 */
4683 rtn = 1004;
4684 break;
4685 default:
4686 rtn = UNDEFINED;
4687 break;
4688 }
4689 }
4690 return (rtn);
4691 }
4692
4693 /*
4694 * iscsi_virt_lun_init - attempts to complete a mdi/scsi_vhci binding
4695 *
4696 * This routine is used to associate the tran_tgt_private to our ilp
4697 * structure. This function is indirectly called from our
4698 * iscsi_lun_create_xxx routines. These routines must prevent
4699 * the session and lun lists from changing during this call.
4700 */
4701 /* ARGSUSED */
4702 static int
iscsi_virt_lun_init(dev_info_t * hba_dip,dev_info_t * lun_dip,scsi_hba_tran_t * hba_tran,struct scsi_device * sd)4703 iscsi_virt_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
4704 scsi_hba_tran_t *hba_tran, struct scsi_device *sd)
4705 {
4706 iscsi_lun_t *ilp = NULL;
4707 iscsi_lun_t *ilp_check = NULL;
4708 iscsi_sess_t *isp = NULL;
4709 char *lun_guid = NULL;
4710 mdi_pathinfo_t *pip = NULL;
4711 iscsi_hba_t *ihp = (iscsi_hba_t *)hba_tran->tran_hba_private;
4712 char target_port_name[MAX_NAME_PROP_SIZE];
4713
4714 /*
4715 * Here's a nice little piece of undocumented stuff.
4716 */
4717 if ((pip = (mdi_pathinfo_t *)sd->sd_private) == NULL) {
4718 /*
4719 * Very bad news if this occurs. Somehow SCSI_vhci has
4720 * lost the pathinfo node for this target.
4721 */
4722 return (DDI_NOT_WELL_FORMED);
4723 }
4724
4725 ilp = (iscsi_lun_t *)mdi_pi_get_phci_private(pip);
4726
4727 /*
4728 * +----------------------------------------------------+
4729 * | Looking to find the target device via the property |
4730 * | is not required since the driver can easily get |
4731 * | this information from the mdi_phci_get_private() |
4732 * | call above. This is just a consistency check |
4733 * | which can be removed. |
4734 */
4735 if (mdi_prop_lookup_string(pip, MDI_GUID, &lun_guid) !=
4736 DDI_PROP_SUCCESS) {
4737 return (DDI_NOT_WELL_FORMED);
4738 }
4739
4740 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) {
4741
4742 /* If this isn't the matching session continue */
4743 if (ilp->lun_sess != isp) {
4744 continue;
4745 }
4746
4747 /*
4748 * We are already holding the lun list rwlock
4749 * for this thread on the callers side of mdi_pi_online
4750 * or ndi_devi_online. Which lead to this functions
4751 * call.
4752 */
4753 for (ilp_check = isp->sess_lun_list; ilp_check;
4754 ilp_check = ilp_check->lun_next) {
4755
4756 /*
4757 * If this is the matching LUN and contains
4758 * the same LUN GUID then break we found our
4759 * match.
4760 */
4761 if ((ilp == ilp_check) &&
4762 (strcmp(lun_guid, ilp_check->lun_guid) == 0)) {
4763 break;
4764 }
4765 }
4766 if (ilp_check != NULL) {
4767 break;
4768 }
4769 }
4770
4771 /*
4772 * Free resource that's no longer required.
4773 */
4774 if (lun_guid != NULL)
4775 (void) mdi_prop_free(lun_guid);
4776
4777 if (ilp_check == NULL) {
4778 /*
4779 * Failed to find iSCSI LUN in HBA chain based
4780 * on the GUID that was stored as a property on
4781 * the pathinfo node.
4782 */
4783 return (DDI_NOT_WELL_FORMED);
4784 }
4785
4786 if (ilp != ilp_check) {
4787 /*
4788 * The iSCSI target that we found on the HBA link is
4789 * different than the iSCSI target that was stored as
4790 * private data on the pathinfo node.
4791 */
4792 return (DDI_NOT_WELL_FORMED);
4793 }
4794 /*
4795 * | End of consistency check |
4796 * +----------------------------------------------------+
4797 */
4798
4799 hba_tran->tran_tgt_private = ilp;
4800
4801 target_port_name[0] = '\0';
4802 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) {
4803 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE,
4804 "%02x%02x%02x%02x%02x%02x,%s",
4805 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1],
4806 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3],
4807 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5],
4808 ilp->lun_sess->sess_name);
4809 } else {
4810 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE,
4811 "%02x%02x%02x%02x%02x%02x,%s,%d",
4812 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1],
4813 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3],
4814 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5],
4815 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf);
4816 }
4817
4818 if (mdi_prop_update_string(pip,
4819 SCSI_ADDR_PROP_TARGET_PORT, target_port_name) != DDI_PROP_SUCCESS) {
4820 cmn_err(CE_WARN, "iscsi_virt_lun_init: Creating '"
4821 SCSI_ADDR_PROP_TARGET_PORT "' property on Path(%p) "
4822 "for Target(%s), Lun(%d) Failed",
4823 (void *)pip, ilp->lun_sess->sess_name, ilp->lun_num);
4824 }
4825
4826 return (DDI_SUCCESS);
4827 }
4828
4829 /*
4830 * iscsi_phys_lun_init - attempts to complete a ndi binding
4831 *
4832 * This routine is used to associate the tran_tgt_private to our
4833 * ilp structure. This function is indirectly called from our
4834 * iscsi_lun_create_xxx routines. These routines must prevent
4835 * the session and lun lists from changing during this call.
4836 */
4837 static int
iscsi_phys_lun_init(dev_info_t * hba_dip,dev_info_t * lun_dip,scsi_hba_tran_t * hba_tran,struct scsi_device * sd)4838 iscsi_phys_lun_init(dev_info_t *hba_dip, dev_info_t *lun_dip,
4839 scsi_hba_tran_t *hba_tran, struct scsi_device *sd)
4840 {
4841 int rtn = DDI_SUCCESS;
4842 iscsi_hba_t *ihp = NULL;
4843 iscsi_sess_t *isp = NULL;
4844 iscsi_lun_t *ilp = NULL;
4845 char target_port_name[MAX_NAME_PROP_SIZE];
4846 int *words = NULL;
4847 uint_t nwords = 0;
4848
4849 ASSERT(hba_dip);
4850 ASSERT(lun_dip);
4851 ASSERT(hba_tran);
4852 ASSERT(sd);
4853 ihp = (iscsi_hba_t *)hba_tran->tran_hba_private;
4854 ASSERT(ihp);
4855
4856 if (ddi_prop_lookup_int_array(DDI_DEV_T_ANY, lun_dip,
4857 DDI_PROP_DONTPASS, LUN_PROP, &words, &nwords) != DDI_PROP_SUCCESS) {
4858 cmn_err(CE_WARN, "iscsi_phys_lun_init: Returning DDI_FAILURE:"
4859 "lun for %s (instance %d)", ddi_get_name(lun_dip),
4860 ddi_get_instance(lun_dip));
4861 return (DDI_FAILURE);
4862 }
4863
4864 if (nwords == 0) {
4865 ddi_prop_free(words);
4866 return (DDI_FAILURE);
4867 }
4868
4869 ASSERT(words != NULL);
4870
4871 /* See if we already created this session */
4872
4873 /* Walk the HBA's session list */
4874 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) {
4875 /* compare target name as the unique identifier */
4876 if (sd->sd_address.a_target == isp->sess_oid) {
4877 /* found match */
4878 break;
4879 }
4880 }
4881
4882 /* If we found matching session continue searching for tgt */
4883 if (isp != NULL) {
4884 /*
4885 * Search for the matching iscsi lun structure. We don't
4886 * need to hold the READER for the lun list at this point.
4887 * because the tran_get_name is being called from the online
4888 * function which is already holding a reader on the lun
4889 * list.
4890 */
4891 for (ilp = isp->sess_lun_list; ilp; ilp = ilp->lun_next) {
4892 if (*words == ilp->lun_num) {
4893 /* found match */
4894 break;
4895 }
4896 }
4897
4898 if (ilp != NULL) {
4899 /*
4900 * tgt found path it to the tran_lun_private
4901 * this is used later for fast access on
4902 * init_pkt and start
4903 */
4904 hba_tran->tran_tgt_private = ilp;
4905 } else {
4906 /* tgt not found */
4907 ddi_prop_free(words);
4908 return (DDI_FAILURE);
4909 }
4910 } else {
4911 /* sess not found */
4912 ddi_prop_free(words);
4913 return (DDI_FAILURE);
4914 }
4915 ddi_prop_free(words);
4916
4917 target_port_name[0] = '\0';
4918 if (ilp->lun_sess->sess_tpgt_conf == ISCSI_DEFAULT_TPGT) {
4919 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE,
4920 "%02x%02x%02x%02x%02x%02x,%s",
4921 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1],
4922 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3],
4923 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5],
4924 ilp->lun_sess->sess_name);
4925 } else {
4926 (void) snprintf(target_port_name, MAX_NAME_PROP_SIZE,
4927 "%02x%02x%02x%02x%02x%02x,%s,%d",
4928 ilp->lun_sess->sess_isid[0], ilp->lun_sess->sess_isid[1],
4929 ilp->lun_sess->sess_isid[2], ilp->lun_sess->sess_isid[3],
4930 ilp->lun_sess->sess_isid[4], ilp->lun_sess->sess_isid[5],
4931 ilp->lun_sess->sess_name, ilp->lun_sess->sess_tpgt_conf);
4932 }
4933
4934 if (ddi_prop_update_string(DDI_DEV_T_NONE, lun_dip,
4935 SCSI_ADDR_PROP_TARGET_PORT, target_port_name) != DDI_PROP_SUCCESS) {
4936 cmn_err(CE_WARN, "iscsi_phys_lun_init: Creating '"
4937 SCSI_ADDR_PROP_TARGET_PORT "' property on Target(%s), "
4938 "Lun(%d) Failed", ilp->lun_sess->sess_name, ilp->lun_num);
4939 }
4940
4941 return (rtn);
4942 }
4943
4944 /*
4945 * +--------------------------------------------------------------------+
4946 * | End of scsi_tran support routines |
4947 * +--------------------------------------------------------------------+
4948 */
4949
4950 /*
4951 * +--------------------------------------------------------------------+
4952 * | Begin of struct utility routines |
4953 * +--------------------------------------------------------------------+
4954 */
4955
4956
4957 /*
4958 * iscsi_set_default_login_params - This function sets the
4959 * driver default login params. This is using during the
4960 * creation of our iSCSI HBA structure initialization by
4961 * could be used at other times to reset back to the defaults.
4962 */
4963 void
iscsi_set_default_login_params(iscsi_login_params_t * params)4964 iscsi_set_default_login_params(iscsi_login_params_t *params)
4965 {
4966 params->immediate_data = ISCSI_DEFAULT_IMMEDIATE_DATA;
4967 params->initial_r2t = ISCSI_DEFAULT_INITIALR2T;
4968 params->first_burst_length = ISCSI_DEFAULT_FIRST_BURST_LENGTH;
4969 params->max_burst_length = ISCSI_DEFAULT_MAX_BURST_LENGTH;
4970 params->data_pdu_in_order = ISCSI_DEFAULT_DATA_PDU_IN_ORDER;
4971 params->data_sequence_in_order = ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER;
4972 params->default_time_to_wait = ISCSI_DEFAULT_TIME_TO_WAIT;
4973 params->default_time_to_retain = ISCSI_DEFAULT_TIME_TO_RETAIN;
4974 params->header_digest = ISCSI_DEFAULT_HEADER_DIGEST;
4975 params->data_digest = ISCSI_DEFAULT_DATA_DIGEST;
4976 params->max_recv_data_seg_len = ISCSI_DEFAULT_MAX_RECV_SEG_LEN;
4977 params->max_xmit_data_seg_len = ISCSI_DEFAULT_MAX_XMIT_SEG_LEN;
4978 params->max_connections = ISCSI_DEFAULT_MAX_CONNECTIONS;
4979 params->max_outstanding_r2t = ISCSI_DEFAULT_MAX_OUT_R2T;
4980 params->error_recovery_level = ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL;
4981 params->ifmarker = ISCSI_DEFAULT_IFMARKER;
4982 params->ofmarker = ISCSI_DEFAULT_OFMARKER;
4983 }
4984
4985 /* Helper function to sets the driver default tunable parameters */
4986 static void
iscsi_set_default_tunable_params(iscsi_tunable_params_t * params)4987 iscsi_set_default_tunable_params(iscsi_tunable_params_t *params)
4988 {
4989 params->recv_login_rsp_timeout = ISCSI_DEFAULT_RX_TIMEOUT_VALUE;
4990 params->conn_login_max = ISCSI_DEFAULT_CONN_DEFAULT_LOGIN_MAX;
4991 params->polling_login_delay = ISCSI_DEFAULT_LOGIN_POLLING_DELAY;
4992 }
4993
4994 /*
4995 * +--------------------------------------------------------------------+
4996 * | End of struct utility routines |
4997 * +--------------------------------------------------------------------+
4998 */
4999
5000 /*
5001 * +--------------------------------------------------------------------+
5002 * | Begin of ioctl utility routines |
5003 * +--------------------------------------------------------------------+
5004 */
5005
5006 /*
5007 * iscsi_get_param - This function is a helper to ISCSI_GET_PARAM
5008 * IOCTL
5009 */
5010 int
iscsi_get_param(iscsi_login_params_t * params,boolean_t valid_flag,iscsi_param_get_t * ipgp)5011 iscsi_get_param(iscsi_login_params_t *params, boolean_t valid_flag,
5012 iscsi_param_get_t *ipgp) {
5013 int rtn = 0;
5014
5015 /* ---- Default to settable, possibly changed later ---- */
5016 ipgp->g_value.v_valid = valid_flag;
5017 ipgp->g_value.v_settable = B_TRUE;
5018
5019 switch (ipgp->g_param) {
5020 /*
5021 * Boolean parameters
5022 */
5023 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER:
5024 ipgp->g_value.v_bool.b_current =
5025 params->data_sequence_in_order;
5026 ipgp->g_value.v_bool.b_default =
5027 ISCSI_DEFAULT_DATA_SEQUENCE_IN_ORDER;
5028 break;
5029 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA:
5030 ipgp->g_value.v_bool.b_current =
5031 params->immediate_data;
5032 ipgp->g_value.v_bool.b_default =
5033 ISCSI_DEFAULT_IMMEDIATE_DATA;
5034 break;
5035 case ISCSI_LOGIN_PARAM_INITIAL_R2T:
5036 ipgp->g_value.v_bool.b_current =
5037 params->initial_r2t;
5038 ipgp->g_value.v_bool.b_default =
5039 ISCSI_DEFAULT_IMMEDIATE_DATA;
5040 break;
5041 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER:
5042 ipgp->g_value.v_bool.b_current =
5043 params->data_pdu_in_order;
5044 ipgp->g_value.v_bool.b_default =
5045 ISCSI_DEFAULT_DATA_PDU_IN_ORDER;
5046 break;
5047
5048 /*
5049 * Integer parameters
5050 */
5051 case ISCSI_LOGIN_PARAM_HEADER_DIGEST:
5052 ipgp->g_value.v_integer.i_current = params->header_digest;
5053 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_HEADER_DIGEST;
5054 ipgp->g_value.v_integer.i_min = 0;
5055 ipgp->g_value.v_integer.i_max = ISCSI_MAX_HEADER_DIGEST;
5056 ipgp->g_value.v_integer.i_incr = 1;
5057 break;
5058 case ISCSI_LOGIN_PARAM_DATA_DIGEST:
5059 ipgp->g_value.v_integer.i_current = params->data_digest;
5060 ipgp->g_value.v_integer.i_default = ISCSI_DEFAULT_DATA_DIGEST;
5061 ipgp->g_value.v_integer.i_min = 0;
5062 ipgp->g_value.v_integer.i_max = ISCSI_MAX_DATA_DIGEST;
5063 ipgp->g_value.v_integer.i_incr = 1;
5064 break;
5065 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN:
5066 ipgp->g_value.v_integer.i_current =
5067 params->default_time_to_retain;
5068 ipgp->g_value.v_integer.i_default =
5069 ISCSI_DEFAULT_TIME_TO_RETAIN;
5070 ipgp->g_value.v_integer.i_min = 0;
5071 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2RETAIN;
5072 ipgp->g_value.v_integer.i_incr = 1;
5073 break;
5074 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT:
5075 ipgp->g_value.v_integer.i_current =
5076 params->default_time_to_wait;
5077 ipgp->g_value.v_integer.i_default =
5078 ISCSI_DEFAULT_TIME_TO_WAIT;
5079 ipgp->g_value.v_integer.i_min = 0;
5080 ipgp->g_value.v_integer.i_max = ISCSI_MAX_TIME2WAIT;
5081 ipgp->g_value.v_integer.i_incr = 1;
5082 break;
5083 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL:
5084 ipgp->g_value.v_integer.i_current =
5085 params->error_recovery_level;
5086 ipgp->g_value.v_integer.i_default =
5087 ISCSI_DEFAULT_ERROR_RECOVERY_LEVEL;
5088 ipgp->g_value.v_integer.i_min = 0;
5089 ipgp->g_value.v_integer.i_max = ISCSI_MAX_ERROR_RECOVERY_LEVEL;
5090 ipgp->g_value.v_integer.i_incr = 1;
5091 ipgp->g_value.v_settable = B_FALSE;
5092 break;
5093 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH:
5094 ipgp->g_value.v_integer.i_current =
5095 params->first_burst_length;
5096 ipgp->g_value.v_integer.i_default =
5097 ISCSI_DEFAULT_FIRST_BURST_LENGTH;
5098 ipgp->g_value.v_integer.i_min = 512;
5099 ipgp->g_value.v_integer.i_max = ISCSI_MAX_FIRST_BURST_LENGTH;
5100 ipgp->g_value.v_integer.i_incr = 1;
5101 break;
5102 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH:
5103 ipgp->g_value.v_integer.i_current =
5104 params->max_burst_length;
5105 ipgp->g_value.v_integer.i_default =
5106 ISCSI_DEFAULT_MAX_BURST_LENGTH;
5107 ipgp->g_value.v_integer.i_min = 512;
5108 ipgp->g_value.v_integer.i_max = ISCSI_MAX_BURST_LENGTH;
5109 ipgp->g_value.v_integer.i_incr = 1;
5110 break;
5111 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS:
5112 ipgp->g_value.v_integer.i_current =
5113 params->max_connections;
5114 ipgp->g_value.v_settable = B_FALSE;
5115 ipgp->g_value.v_integer.i_default =
5116 ISCSI_DEFAULT_MAX_CONNECTIONS;
5117 ipgp->g_value.v_integer.i_min = 1;
5118 ipgp->g_value.v_integer.i_max = ISCSI_MAX_CONNECTIONS;
5119 ipgp->g_value.v_integer.i_incr = 1;
5120 break;
5121 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T:
5122 ipgp->g_value.v_integer.i_current =
5123 params->max_outstanding_r2t;
5124 ipgp->g_value.v_settable = B_FALSE;
5125 ipgp->g_value.v_integer.i_default =
5126 ISCSI_DEFAULT_MAX_OUT_R2T;
5127 ipgp->g_value.v_integer.i_min = 1;
5128 ipgp->g_value.v_integer.i_max = ISCSI_MAX_OUTSTANDING_R2T;
5129 ipgp->g_value.v_integer.i_incr = 1;
5130 break;
5131 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH:
5132 ipgp->g_value.v_integer.i_current =
5133 params->max_recv_data_seg_len;
5134 ipgp->g_value.v_integer.i_default =
5135 ISCSI_DEFAULT_MAX_RECV_SEG_LEN;
5136 ipgp->g_value.v_integer.i_min = 512;
5137 ipgp->g_value.v_integer.i_max =
5138 ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
5139 ipgp->g_value.v_integer.i_incr = 1;
5140 break;
5141 default:
5142 rtn = EINVAL;
5143 }
5144
5145 return (rtn);
5146 }
5147
5148 /*
5149 * +--------------------------------------------------------------------+
5150 * | End of ioctl utility routines |
5151 * +--------------------------------------------------------------------+
5152 */
5153
5154 /*
5155 * iscsi_get_name_from_iqn - Translates a normal iqn/eui into a
5156 * IEEE safe address. IEEE addresses have a number of characters
5157 * set aside as reserved.
5158 */
5159 static void
iscsi_get_name_from_iqn(char * name,int name_max_len)5160 iscsi_get_name_from_iqn(char *name, int name_max_len)
5161 {
5162 char *tmp = NULL;
5163 char *oldch = NULL;
5164 char *newch = NULL;
5165
5166 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP);
5167
5168 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0';
5169 oldch++, newch++) {
5170 switch (*oldch) {
5171 case ':':
5172 *newch++ = '%';
5173 *newch++ = '3';
5174 *newch = 'A';
5175 break;
5176 case ' ':
5177 *newch++ = '%';
5178 *newch++ = '2';
5179 *newch = '0';
5180 break;
5181 case '@':
5182 *newch++ = '%';
5183 *newch++ = '4';
5184 *newch = '0';
5185 break;
5186 case '/':
5187 *newch++ = '%';
5188 *newch++ = '2';
5189 *newch = 'F';
5190 break;
5191 default:
5192 *newch = *oldch;
5193 }
5194 }
5195 (void) strncpy(name, tmp, name_max_len);
5196 kmem_free(tmp, MAX_GET_NAME_SIZE);
5197 }
5198
5199 /*
5200 * iscsi_get_name_to_iqn - Converts IEEE safe address back
5201 * into a iscsi iqn/eui.
5202 */
5203 static void
iscsi_get_name_to_iqn(char * name,int name_max_len)5204 iscsi_get_name_to_iqn(char *name, int name_max_len)
5205 {
5206 char *tmp = NULL;
5207 char *oldch = NULL;
5208 char *newch = NULL;
5209
5210 tmp = kmem_zalloc(MAX_GET_NAME_SIZE, KM_SLEEP);
5211
5212 for (oldch = &name[0], newch = &tmp[0]; *oldch != '\0';
5213 oldch++, newch++) {
5214 if (*oldch == '%') {
5215 switch (*(oldch+1)) {
5216 case '2':
5217 if (*(oldch+2) == '0') {
5218 *newch = ' ';
5219 oldch += 2;
5220 } else if (*(oldch+2) == 'F') {
5221 *newch = '/';
5222 oldch += 2;
5223 } else {
5224 *newch = *oldch;
5225 }
5226 break;
5227 case '3':
5228 if (*(oldch+2) == 'A') {
5229 *newch = ':';
5230 oldch += 2;
5231 } else {
5232 *newch = *oldch;
5233 }
5234 break;
5235 case '4':
5236 if (*(oldch+2) == '0') {
5237 *newch = '@';
5238 oldch += 2;
5239 } else {
5240 *newch = *oldch;
5241 }
5242 break;
5243 default:
5244 *newch = *oldch;
5245 }
5246 } else {
5247 *newch = *oldch;
5248 }
5249 }
5250 (void) strncpy(name, tmp, name_max_len);
5251 kmem_free(tmp, MAX_GET_NAME_SIZE);
5252 }
5253
5254 /*
5255 * iscsi_get_persisted_param * - a helper to ISCSI_GET_PARAM ioctl
5256 *
5257 * On return 0 means persisted parameter found
5258 */
5259 int
iscsi_get_persisted_param(uchar_t * name,iscsi_param_get_t * ipgp,iscsi_login_params_t * params)5260 iscsi_get_persisted_param(uchar_t *name, iscsi_param_get_t *ipgp,
5261 iscsi_login_params_t *params)
5262 {
5263 int rtn = 1;
5264 persistent_param_t *pparam;
5265
5266 if (name == NULL || strlen((char *)name) == 0) {
5267 return (rtn);
5268 }
5269
5270 pparam = (persistent_param_t *)kmem_zalloc(sizeof (*pparam), KM_SLEEP);
5271
5272 if (persistent_param_get((char *)name, pparam) == B_TRUE) {
5273 if (pparam->p_bitmap & (1 << ipgp->g_param)) {
5274 /* Found configured parameter. */
5275 bcopy(&pparam->p_params, params, sizeof (*params));
5276 rtn = 0;
5277 }
5278 }
5279
5280 kmem_free(pparam, sizeof (*pparam));
5281
5282 return (rtn);
5283 }
5284
5285 /*
5286 * iscsi_override_target_default - helper function set the target's default
5287 * login parameter if there is a configured initiator parameter.
5288 *
5289 */
5290 static void
iscsi_override_target_default(iscsi_hba_t * ihp,iscsi_param_get_t * ipg)5291 iscsi_override_target_default(iscsi_hba_t *ihp, iscsi_param_get_t *ipg)
5292 {
5293 persistent_param_t *pp;
5294 iscsi_login_params_t *params;
5295
5296 pp = (persistent_param_t *)kmem_zalloc(sizeof (*pp), KM_SLEEP);
5297 if (persistent_param_get((char *)ihp->hba_name, pp) == B_TRUE) {
5298 if (pp->p_bitmap & (1 << ipg->g_param)) {
5299 params = &pp->p_params;
5300 switch (ipg->g_param) {
5301 case ISCSI_LOGIN_PARAM_DATA_SEQUENCE_IN_ORDER:
5302 ipg->g_value.v_bool.b_default =
5303 params->data_sequence_in_order;
5304 break;
5305 case ISCSI_LOGIN_PARAM_IMMEDIATE_DATA:
5306 ipg->g_value.v_bool.b_default =
5307 params->immediate_data;
5308 break;
5309 case ISCSI_LOGIN_PARAM_INITIAL_R2T:
5310 ipg->g_value.v_bool.b_default =
5311 params->initial_r2t;
5312 break;
5313 case ISCSI_LOGIN_PARAM_DATA_PDU_IN_ORDER:
5314 ipg->g_value.v_bool.b_default =
5315 params->data_pdu_in_order;
5316 break;
5317 case ISCSI_LOGIN_PARAM_HEADER_DIGEST:
5318 ipg->g_value.v_integer.i_default =
5319 params->header_digest;
5320 break;
5321 case ISCSI_LOGIN_PARAM_DATA_DIGEST:
5322 ipg->g_value.v_integer.i_default =
5323 params->data_digest;
5324 break;
5325 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_RETAIN:
5326 ipg->g_value.v_integer.i_default =
5327 params->default_time_to_retain;
5328 break;
5329 case ISCSI_LOGIN_PARAM_DEFAULT_TIME_2_WAIT:
5330 ipg->g_value.v_integer.i_default =
5331 params->default_time_to_wait;
5332 break;
5333 case ISCSI_LOGIN_PARAM_ERROR_RECOVERY_LEVEL:
5334 ipg->g_value.v_integer.i_default =
5335 params->error_recovery_level;
5336 break;
5337 case ISCSI_LOGIN_PARAM_FIRST_BURST_LENGTH:
5338 ipg->g_value.v_integer.i_default =
5339 params->first_burst_length;
5340 break;
5341 case ISCSI_LOGIN_PARAM_MAX_BURST_LENGTH:
5342 ipg->g_value.v_integer.i_default =
5343 params->max_burst_length;
5344 break;
5345 case ISCSI_LOGIN_PARAM_MAX_CONNECTIONS:
5346 ipg->g_value.v_integer.i_default =
5347 params->max_connections;
5348 break;
5349 case ISCSI_LOGIN_PARAM_OUTSTANDING_R2T:
5350 ipg->g_value.v_integer.i_default =
5351 params->max_outstanding_r2t;
5352 break;
5353 case ISCSI_LOGIN_PARAM_MAX_RECV_DATA_SEGMENT_LENGTH:
5354 ipg->g_value.v_integer.i_default =
5355 params->max_xmit_data_seg_len;
5356 break;
5357 default:
5358 break;
5359 }
5360 }
5361 }
5362 kmem_free(pp, sizeof (*pp));
5363 }
5364
5365 static boolean_t
iscsi_cmp_boot_sess_oid(iscsi_hba_t * ihp,uint32_t oid)5366 iscsi_cmp_boot_sess_oid(iscsi_hba_t *ihp, uint32_t oid)
5367 {
5368 iscsi_sess_t *isp = NULL;
5369
5370 if (iscsi_chk_bootlun_mpxio(ihp)) {
5371 for (isp = ihp->hba_sess_list; isp; isp = isp->sess_next) {
5372 if ((isp->sess_oid == oid) && isp->sess_boot) {
5373 /* oid is session object */
5374 break;
5375 }
5376 if ((isp->sess_target_oid == oid) && isp->sess_boot) {
5377 /*
5378 * oid is target object while
5379 * this session is boot session
5380 */
5381 break;
5382 }
5383 }
5384 if (oid == ihp->hba_oid) {
5385 /* oid is initiator object id */
5386 return (B_TRUE);
5387 } else if ((isp != NULL) && (isp->sess_boot)) {
5388 /* oid is boot session object id */
5389 return (B_TRUE);
5390 }
5391 }
5392 return (B_FALSE);
5393 }
5394
5395 /*
5396 * iscsi_client_request_service - request the iSCSI service
5397 * returns true if the service is enabled and increases the count
5398 * returns false if the service is disabled
5399 * blocks until the service status is either enabled or disabled
5400 */
5401 boolean_t
iscsi_client_request_service(iscsi_hba_t * ihp)5402 iscsi_client_request_service(iscsi_hba_t *ihp) {
5403 boolean_t rval = B_TRUE;
5404
5405 mutex_enter(&ihp->hba_service_lock);
5406 while ((ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) ||
5407 (ihp->hba_service_client_count == UINT_MAX)) {
5408 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock);
5409 }
5410 if (ihp->hba_service_status == ISCSI_SERVICE_ENABLED) {
5411 ihp->hba_service_client_count++;
5412 } else {
5413 rval = B_FALSE;
5414 }
5415 mutex_exit(&ihp->hba_service_lock);
5416
5417 return (rval);
5418 }
5419
5420 /*
5421 * iscsi_client_release_service - decrease the count and wake up
5422 * blocking threads if the count reaches zero
5423 */
5424 void
iscsi_client_release_service(iscsi_hba_t * ihp)5425 iscsi_client_release_service(iscsi_hba_t *ihp) {
5426 mutex_enter(&ihp->hba_service_lock);
5427 ASSERT(ihp->hba_service_client_count > 0);
5428 ihp->hba_service_client_count--;
5429 if (ihp->hba_service_client_count == 0) {
5430 cv_broadcast(&ihp->hba_service_cv);
5431 }
5432 mutex_exit(&ihp->hba_service_lock);
5433 }
5434
5435 /*
5436 * iscsi_enter_service_zone - enter the service zone, should be called
5437 * before doing any modifications to the service status
5438 * return TRUE if the zone is entered
5439 * FALSE if no need to enter the zone
5440 */
5441 static boolean_t
iscsi_enter_service_zone(iscsi_hba_t * ihp,uint32_t status)5442 iscsi_enter_service_zone(iscsi_hba_t *ihp, uint32_t status) {
5443 if ((status != ISCSI_SERVICE_ENABLED) &&
5444 (status != ISCSI_SERVICE_DISABLED)) {
5445 return (B_FALSE);
5446 }
5447
5448 mutex_enter(&ihp->hba_service_lock);
5449 while (ihp->hba_service_status == ISCSI_SERVICE_TRANSITION) {
5450 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock);
5451 }
5452 if (ihp->hba_service_status == status) {
5453 mutex_exit(&ihp->hba_service_lock);
5454 return (B_FALSE);
5455 }
5456 ihp->hba_service_status = ISCSI_SERVICE_TRANSITION;
5457 while (ihp->hba_service_client_count > 0) {
5458 cv_wait(&ihp->hba_service_cv, &ihp->hba_service_lock);
5459 }
5460 mutex_exit(&ihp->hba_service_lock);
5461 return (B_TRUE);
5462 }
5463
5464 /*
5465 * iscsi_exit_service_zone - exits the service zone and wakes up waiters
5466 */
5467 static void
iscsi_exit_service_zone(iscsi_hba_t * ihp,uint32_t status)5468 iscsi_exit_service_zone(iscsi_hba_t *ihp, uint32_t status) {
5469 if ((status != ISCSI_SERVICE_ENABLED) &&
5470 (status != ISCSI_SERVICE_DISABLED)) {
5471 return;
5472 }
5473
5474 mutex_enter(&ihp->hba_service_lock);
5475 ASSERT(ihp->hba_service_status == ISCSI_SERVICE_TRANSITION);
5476 ihp->hba_service_status = status;
5477 cv_broadcast(&ihp->hba_service_cv);
5478 mutex_exit(&ihp->hba_service_lock);
5479 }
5480
5481 static void
iscsi_check_miniroot(iscsi_hba_t * ihp)5482 iscsi_check_miniroot(iscsi_hba_t *ihp) {
5483 if (strncmp(rootfs.bo_name, "/ramdisk", 8) == 0) {
5484 /*
5485 * in miniroot we don't have the persistent store
5486 * so just to need to ensure an enabled status
5487 */
5488 ihp->hba_service_status = ISCSI_SERVICE_ENABLED;
5489 }
5490 }
5491
5492 static void
iscsi_get_tunable_default(iscsi_tunable_object_t * param)5493 iscsi_get_tunable_default(iscsi_tunable_object_t *param) {
5494 int param_id = 0;
5495
5496 param_id = 1 << (param->t_param - 1);
5497 param->t_set = B_FALSE;
5498 switch (param_id) {
5499 case ISCSI_TUNABLE_PARAM_RX_TIMEOUT_VALUE:
5500 param->t_value.v_integer = ISCSI_DEFAULT_RX_TIMEOUT_VALUE;
5501 break;
5502 case ISCSI_TUNABLE_PARAM_LOGIN_POLLING_DELAY:
5503 param->t_value.v_integer = ISCSI_DEFAULT_LOGIN_POLLING_DELAY;
5504 break;
5505 case ISCSI_TUNABLE_PARAM_CONN_LOGIN_MAX:
5506 param->t_value.v_integer = ISCSI_DEFAULT_CONN_DEFAULT_LOGIN_MAX;
5507 break;
5508 default:
5509 break;
5510 }
5511 }
5512
5513 /*
5514 * iscsi_get_persisted_tunable_param * - a helper to ISCSI_TUNABLE_PARAM_GET
5515 * ioctl
5516 * return:
5517 * 0 persisted tunable parameter found
5518 * 1 persisted tunable parameter not found
5519 */
5520 static int
iscsi_get_persisted_tunable_param(uchar_t * name,iscsi_tunable_object_t * tpsg)5521 iscsi_get_persisted_tunable_param(uchar_t *name, iscsi_tunable_object_t *tpsg)
5522 {
5523 int rtn = 1;
5524 int param_id = 0;
5525 persistent_tunable_param_t *pparam;
5526
5527 if ((name == NULL) || strlen((char *)name) == 0) {
5528 return (rtn);
5529 }
5530
5531 tpsg->t_set = B_FALSE;
5532 pparam = (persistent_tunable_param_t *)kmem_zalloc(sizeof (*pparam),
5533 KM_SLEEP);
5534 if (persistent_get_tunable_param((char *)name, pparam) == B_TRUE) {
5535 if (pparam->p_bitmap & (1 << (tpsg->t_param - 1))) {
5536 tpsg->t_set = B_TRUE;
5537 param_id = 1 << (tpsg->t_param - 1);
5538 switch (param_id) {
5539 case ISCSI_TUNABLE_PARAM_RX_TIMEOUT_VALUE:
5540 tpsg->t_value.v_integer =
5541 pparam->p_params.recv_login_rsp_timeout;
5542 break;
5543 case ISCSI_TUNABLE_PARAM_LOGIN_POLLING_DELAY:
5544 tpsg->t_value.v_integer =
5545 pparam->p_params.polling_login_delay;
5546 break;
5547 case ISCSI_TUNABLE_PARAM_CONN_LOGIN_MAX:
5548 tpsg->t_value.v_integer =
5549 pparam->p_params.conn_login_max;
5550 break;
5551 default:
5552 break;
5553 }
5554 rtn = 0;
5555 }
5556 }
5557
5558 kmem_free(pparam, sizeof (*pparam));
5559
5560 return (rtn);
5561 }
5562