1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright © 2009 Intel Corporation
4 */
5
6 #include <linux/delay.h>
7 #include <linux/i2c.h>
8 #include <linux/pm_runtime.h>
9
10 #include <drm/drm_fourcc.h>
11 #include <drm/drm_framebuffer.h>
12 #include <drm/drm_modeset_helper_vtables.h>
13
14 #include "framebuffer.h"
15 #include "gem.h"
16 #include "gma_display.h"
17 #include "power.h"
18 #include "psb_drv.h"
19 #include "psb_intel_drv.h"
20 #include "psb_intel_reg.h"
21
22 #define MRST_LIMIT_LVDS_100L 0
23 #define MRST_LIMIT_LVDS_83 1
24 #define MRST_LIMIT_LVDS_100 2
25 #define MRST_LIMIT_SDVO 3
26
27 #define MRST_DOT_MIN 19750
28 #define MRST_DOT_MAX 120000
29 #define MRST_M_MIN_100L 20
30 #define MRST_M_MIN_100 10
31 #define MRST_M_MIN_83 12
32 #define MRST_M_MAX_100L 34
33 #define MRST_M_MAX_100 17
34 #define MRST_M_MAX_83 20
35 #define MRST_P1_MIN 2
36 #define MRST_P1_MAX_0 7
37 #define MRST_P1_MAX_1 8
38
39 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
40 struct drm_crtc *crtc, int target,
41 int refclk, struct gma_clock_t *best_clock);
42
43 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
44 struct drm_crtc *crtc, int target,
45 int refclk, struct gma_clock_t *best_clock);
46
47 static const struct gma_limit_t mrst_limits[] = {
48 { /* MRST_LIMIT_LVDS_100L */
49 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
50 .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
51 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
52 .find_pll = mrst_lvds_find_best_pll,
53 },
54 { /* MRST_LIMIT_LVDS_83L */
55 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
56 .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
57 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
58 .find_pll = mrst_lvds_find_best_pll,
59 },
60 { /* MRST_LIMIT_LVDS_100 */
61 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
62 .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
63 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
64 .find_pll = mrst_lvds_find_best_pll,
65 },
66 { /* MRST_LIMIT_SDVO */
67 .vco = {.min = 1400000, .max = 2800000},
68 .n = {.min = 3, .max = 7},
69 .m = {.min = 80, .max = 137},
70 .p1 = {.min = 1, .max = 2},
71 .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10},
72 .find_pll = mrst_sdvo_find_best_pll,
73 },
74 };
75
76 #define MRST_M_MIN 10
77 static const u32 oaktrail_m_converts[] = {
78 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
79 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
80 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
81 };
82
mrst_limit(struct drm_crtc * crtc,int refclk)83 static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc,
84 int refclk)
85 {
86 const struct gma_limit_t *limit = NULL;
87 struct drm_device *dev = crtc->dev;
88 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
89
90 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
91 || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
92 switch (dev_priv->core_freq) {
93 case 100:
94 limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
95 break;
96 case 166:
97 limit = &mrst_limits[MRST_LIMIT_LVDS_83];
98 break;
99 case 200:
100 limit = &mrst_limits[MRST_LIMIT_LVDS_100];
101 break;
102 }
103 } else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
104 limit = &mrst_limits[MRST_LIMIT_SDVO];
105 } else {
106 limit = NULL;
107 dev_err(dev->dev, "mrst_limit Wrong display type.\n");
108 }
109
110 return limit;
111 }
112
113 /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
mrst_lvds_clock(int refclk,struct gma_clock_t * clock)114 static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock)
115 {
116 clock->dot = (refclk * clock->m) / (14 * clock->p1);
117 }
118
mrst_print_pll(struct gma_clock_t * clock)119 static void mrst_print_pll(struct gma_clock_t *clock)
120 {
121 DRM_DEBUG_DRIVER("dotclock=%d, m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n",
122 clock->dot, clock->m, clock->m1, clock->m2, clock->n,
123 clock->p1, clock->p2);
124 }
125
mrst_sdvo_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)126 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
127 struct drm_crtc *crtc, int target,
128 int refclk, struct gma_clock_t *best_clock)
129 {
130 struct gma_clock_t clock;
131 u32 target_vco, actual_freq;
132 s32 freq_error, min_error = 100000;
133
134 memset(best_clock, 0, sizeof(*best_clock));
135 memset(&clock, 0, sizeof(clock));
136
137 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
138 for (clock.n = limit->n.min; clock.n <= limit->n.max;
139 clock.n++) {
140 for (clock.p1 = limit->p1.min;
141 clock.p1 <= limit->p1.max; clock.p1++) {
142 /* p2 value always stored in p2_slow on SDVO */
143 clock.p = clock.p1 * limit->p2.p2_slow;
144 target_vco = target * clock.p;
145
146 /* VCO will increase at this point so break */
147 if (target_vco > limit->vco.max)
148 break;
149
150 if (target_vco < limit->vco.min)
151 continue;
152
153 actual_freq = (refclk * clock.m) /
154 (clock.n * clock.p);
155 freq_error = 10000 -
156 ((target * 10000) / actual_freq);
157
158 if (freq_error < -min_error) {
159 /* freq_error will start to decrease at
160 this point so break */
161 break;
162 }
163
164 if (freq_error < 0)
165 freq_error = -freq_error;
166
167 if (freq_error < min_error) {
168 min_error = freq_error;
169 *best_clock = clock;
170 }
171 }
172 }
173 if (min_error == 0)
174 break;
175 }
176
177 return min_error == 0;
178 }
179
180 /*
181 * Returns a set of divisors for the desired target clock with the given refclk,
182 * or FALSE. Divisor values are the actual divisors for
183 */
mrst_lvds_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)184 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
185 struct drm_crtc *crtc, int target,
186 int refclk, struct gma_clock_t *best_clock)
187 {
188 struct gma_clock_t clock;
189 int err = target;
190
191 memset(best_clock, 0, sizeof(*best_clock));
192 memset(&clock, 0, sizeof(clock));
193
194 for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
195 for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
196 clock.p1++) {
197 int this_err;
198
199 mrst_lvds_clock(refclk, &clock);
200
201 this_err = abs(clock.dot - target);
202 if (this_err < err) {
203 *best_clock = clock;
204 err = this_err;
205 }
206 }
207 }
208 return err != target;
209 }
210
211 /*
212 * Sets the power management mode of the pipe and plane.
213 *
214 * This code should probably grow support for turning the cursor off and back
215 * on appropriately at the same time as we're turning the pipe off/on.
216 */
oaktrail_crtc_dpms(struct drm_crtc * crtc,int mode)217 static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
218 {
219 struct drm_device *dev = crtc->dev;
220 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
221 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
222 int pipe = gma_crtc->pipe;
223 const struct psb_offset *map = &dev_priv->regmap[pipe];
224 u32 temp;
225 int i;
226 int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
227
228 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
229 oaktrail_crtc_hdmi_dpms(crtc, mode);
230 return;
231 }
232
233 if (!gma_power_begin(dev, true))
234 return;
235
236 /* XXX: When our outputs are all unaware of DPMS modes other than off
237 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
238 */
239 switch (mode) {
240 case DRM_MODE_DPMS_ON:
241 case DRM_MODE_DPMS_STANDBY:
242 case DRM_MODE_DPMS_SUSPEND:
243 for (i = 0; i <= need_aux; i++) {
244 /* Enable the DPLL */
245 temp = REG_READ_WITH_AUX(map->dpll, i);
246 if ((temp & DPLL_VCO_ENABLE) == 0) {
247 REG_WRITE_WITH_AUX(map->dpll, temp, i);
248 REG_READ_WITH_AUX(map->dpll, i);
249 /* Wait for the clocks to stabilize. */
250 udelay(150);
251 REG_WRITE_WITH_AUX(map->dpll,
252 temp | DPLL_VCO_ENABLE, i);
253 REG_READ_WITH_AUX(map->dpll, i);
254 /* Wait for the clocks to stabilize. */
255 udelay(150);
256 REG_WRITE_WITH_AUX(map->dpll,
257 temp | DPLL_VCO_ENABLE, i);
258 REG_READ_WITH_AUX(map->dpll, i);
259 /* Wait for the clocks to stabilize. */
260 udelay(150);
261 }
262
263 /* Enable the pipe */
264 temp = REG_READ_WITH_AUX(map->conf, i);
265 if ((temp & PIPEACONF_ENABLE) == 0) {
266 REG_WRITE_WITH_AUX(map->conf,
267 temp | PIPEACONF_ENABLE, i);
268 }
269
270 /* Enable the plane */
271 temp = REG_READ_WITH_AUX(map->cntr, i);
272 if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
273 REG_WRITE_WITH_AUX(map->cntr,
274 temp | DISPLAY_PLANE_ENABLE,
275 i);
276 /* Flush the plane changes */
277 REG_WRITE_WITH_AUX(map->base,
278 REG_READ_WITH_AUX(map->base, i), i);
279 }
280
281 }
282 gma_crtc_load_lut(crtc);
283
284 /* Give the overlay scaler a chance to enable
285 if it's on this pipe */
286 /* psb_intel_crtc_dpms_video(crtc, true); TODO */
287 break;
288 case DRM_MODE_DPMS_OFF:
289 /* Give the overlay scaler a chance to disable
290 * if it's on this pipe */
291 /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
292
293 for (i = 0; i <= need_aux; i++) {
294 /* Disable the VGA plane that we never use */
295 REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
296 /* Disable display plane */
297 temp = REG_READ_WITH_AUX(map->cntr, i);
298 if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
299 REG_WRITE_WITH_AUX(map->cntr,
300 temp & ~DISPLAY_PLANE_ENABLE, i);
301 /* Flush the plane changes */
302 REG_WRITE_WITH_AUX(map->base,
303 REG_READ(map->base), i);
304 REG_READ_WITH_AUX(map->base, i);
305 }
306
307 /* Next, disable display pipes */
308 temp = REG_READ_WITH_AUX(map->conf, i);
309 if ((temp & PIPEACONF_ENABLE) != 0) {
310 REG_WRITE_WITH_AUX(map->conf,
311 temp & ~PIPEACONF_ENABLE, i);
312 REG_READ_WITH_AUX(map->conf, i);
313 }
314 /* Wait for the pipe disable to take effect. */
315 gma_wait_for_vblank(dev);
316
317 temp = REG_READ_WITH_AUX(map->dpll, i);
318 if ((temp & DPLL_VCO_ENABLE) != 0) {
319 REG_WRITE_WITH_AUX(map->dpll,
320 temp & ~DPLL_VCO_ENABLE, i);
321 REG_READ_WITH_AUX(map->dpll, i);
322 }
323
324 /* Wait for the clocks to turn off. */
325 udelay(150);
326 }
327 break;
328 }
329
330 /* Set FIFO Watermarks (values taken from EMGD) */
331 REG_WRITE(DSPARB, 0x3f80);
332 REG_WRITE(DSPFW1, 0x3f8f0404);
333 REG_WRITE(DSPFW2, 0x04040f04);
334 REG_WRITE(DSPFW3, 0x0);
335 REG_WRITE(DSPFW4, 0x04040404);
336 REG_WRITE(DSPFW5, 0x04040404);
337 REG_WRITE(DSPFW6, 0x78);
338 REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040);
339
340 gma_power_end(dev);
341 }
342
343 /*
344 * Return the pipe currently connected to the panel fitter,
345 * or -1 if the panel fitter is not present or not in use
346 */
oaktrail_panel_fitter_pipe(struct drm_device * dev)347 static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
348 {
349 u32 pfit_control;
350
351 pfit_control = REG_READ(PFIT_CONTROL);
352
353 /* See if the panel fitter is in use */
354 if ((pfit_control & PFIT_ENABLE) == 0)
355 return -1;
356 return (pfit_control >> 29) & 3;
357 }
358
oaktrail_crtc_mode_set(struct drm_crtc * crtc,struct drm_display_mode * mode,struct drm_display_mode * adjusted_mode,int x,int y,struct drm_framebuffer * old_fb)359 static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
360 struct drm_display_mode *mode,
361 struct drm_display_mode *adjusted_mode,
362 int x, int y,
363 struct drm_framebuffer *old_fb)
364 {
365 struct drm_device *dev = crtc->dev;
366 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
367 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
368 int pipe = gma_crtc->pipe;
369 const struct psb_offset *map = &dev_priv->regmap[pipe];
370 int refclk = 0;
371 struct gma_clock_t clock;
372 const struct gma_limit_t *limit;
373 u32 dpll = 0, fp = 0, dspcntr, pipeconf;
374 bool ok, is_sdvo = false;
375 bool is_lvds = false;
376 bool is_mipi = false;
377 struct gma_encoder *gma_encoder = NULL;
378 uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
379 struct drm_connector_list_iter conn_iter;
380 struct drm_connector *connector;
381 int i;
382 int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
383
384 if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
385 return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
386
387 if (!gma_power_begin(dev, true))
388 return 0;
389
390 drm_mode_copy(&gma_crtc->saved_mode, mode);
391 drm_mode_copy(&gma_crtc->saved_adjusted_mode, adjusted_mode);
392
393 drm_connector_list_iter_begin(dev, &conn_iter);
394 drm_for_each_connector_iter(connector, &conn_iter) {
395 if (!connector->encoder || connector->encoder->crtc != crtc)
396 continue;
397
398 gma_encoder = gma_attached_encoder(connector);
399
400 switch (gma_encoder->type) {
401 case INTEL_OUTPUT_LVDS:
402 is_lvds = true;
403 break;
404 case INTEL_OUTPUT_SDVO:
405 is_sdvo = true;
406 break;
407 case INTEL_OUTPUT_MIPI:
408 is_mipi = true;
409 break;
410 }
411
412 break;
413 }
414
415 if (gma_encoder)
416 drm_object_property_get_value(&connector->base,
417 dev->mode_config.scaling_mode_property, &scalingType);
418
419 drm_connector_list_iter_end(&conn_iter);
420
421 /* Disable the VGA plane that we never use */
422 for (i = 0; i <= need_aux; i++)
423 REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
424
425 /* Disable the panel fitter if it was on our pipe */
426 if (oaktrail_panel_fitter_pipe(dev) == pipe)
427 REG_WRITE(PFIT_CONTROL, 0);
428
429 for (i = 0; i <= need_aux; i++) {
430 REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) |
431 (mode->crtc_vdisplay - 1), i);
432 }
433
434 if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
435 /* Moorestown doesn't have register support for centering so
436 * we need to mess with the h/vblank and h/vsync start and
437 * ends to get centering */
438 int offsetX = 0, offsetY = 0;
439
440 offsetX = (adjusted_mode->crtc_hdisplay -
441 mode->crtc_hdisplay) / 2;
442 offsetY = (adjusted_mode->crtc_vdisplay -
443 mode->crtc_vdisplay) / 2;
444
445 for (i = 0; i <= need_aux; i++) {
446 REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) |
447 ((adjusted_mode->crtc_htotal - 1) << 16), i);
448 REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) |
449 ((adjusted_mode->crtc_vtotal - 1) << 16), i);
450 REG_WRITE_WITH_AUX(map->hblank,
451 (adjusted_mode->crtc_hblank_start - offsetX - 1) |
452 ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i);
453 REG_WRITE_WITH_AUX(map->hsync,
454 (adjusted_mode->crtc_hsync_start - offsetX - 1) |
455 ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i);
456 REG_WRITE_WITH_AUX(map->vblank,
457 (adjusted_mode->crtc_vblank_start - offsetY - 1) |
458 ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i);
459 REG_WRITE_WITH_AUX(map->vsync,
460 (adjusted_mode->crtc_vsync_start - offsetY - 1) |
461 ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i);
462 }
463 } else {
464 for (i = 0; i <= need_aux; i++) {
465 REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
466 ((adjusted_mode->crtc_htotal - 1) << 16), i);
467 REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
468 ((adjusted_mode->crtc_vtotal - 1) << 16), i);
469 REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
470 ((adjusted_mode->crtc_hblank_end - 1) << 16), i);
471 REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
472 ((adjusted_mode->crtc_hsync_end - 1) << 16), i);
473 REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
474 ((adjusted_mode->crtc_vblank_end - 1) << 16), i);
475 REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
476 ((adjusted_mode->crtc_vsync_end - 1) << 16), i);
477 }
478 }
479
480 /* Flush the plane changes */
481 {
482 const struct drm_crtc_helper_funcs *crtc_funcs =
483 crtc->helper_private;
484 crtc_funcs->mode_set_base(crtc, x, y, old_fb);
485 }
486
487 /* setup pipeconf */
488 pipeconf = REG_READ(map->conf);
489
490 /* Set up the display plane register */
491 dspcntr = REG_READ(map->cntr);
492 dspcntr |= DISPPLANE_GAMMA_ENABLE;
493
494 if (pipe == 0)
495 dspcntr |= DISPPLANE_SEL_PIPE_A;
496 else
497 dspcntr |= DISPPLANE_SEL_PIPE_B;
498
499 if (is_mipi)
500 goto oaktrail_crtc_mode_set_exit;
501
502
503 dpll = 0; /*BIT16 = 0 for 100MHz reference */
504
505 refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000;
506 limit = mrst_limit(crtc, refclk);
507 ok = limit->find_pll(limit, crtc, adjusted_mode->clock,
508 refclk, &clock);
509
510 if (is_sdvo) {
511 /* Convert calculated values to register values */
512 clock.p1 = (1L << (clock.p1 - 1));
513 clock.m -= 2;
514 clock.n = (1L << (clock.n - 1));
515 }
516
517 if (!ok)
518 DRM_ERROR("Failed to find proper PLL settings");
519
520 mrst_print_pll(&clock);
521
522 if (is_sdvo)
523 fp = clock.n << 16 | clock.m;
524 else
525 fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
526
527 dpll |= DPLL_VGA_MODE_DIS;
528
529
530 dpll |= DPLL_VCO_ENABLE;
531
532 if (is_lvds)
533 dpll |= DPLLA_MODE_LVDS;
534 else
535 dpll |= DPLLB_MODE_DAC_SERIAL;
536
537 if (is_sdvo) {
538 int sdvo_pixel_multiply =
539 adjusted_mode->clock / mode->clock;
540
541 dpll |= DPLL_DVO_HIGH_SPEED;
542 dpll |=
543 (sdvo_pixel_multiply -
544 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
545 }
546
547
548 /* compute bitmask from p1 value */
549 if (is_sdvo)
550 dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16;
551 else
552 dpll |= (1 << (clock.p1 - 2)) << 17;
553
554 dpll |= DPLL_VCO_ENABLE;
555
556 if (dpll & DPLL_VCO_ENABLE) {
557 for (i = 0; i <= need_aux; i++) {
558 REG_WRITE_WITH_AUX(map->fp0, fp, i);
559 REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i);
560 REG_READ_WITH_AUX(map->dpll, i);
561 /* Check the DPLLA lock bit PIPEACONF[29] */
562 udelay(150);
563 }
564 }
565
566 for (i = 0; i <= need_aux; i++) {
567 REG_WRITE_WITH_AUX(map->fp0, fp, i);
568 REG_WRITE_WITH_AUX(map->dpll, dpll, i);
569 REG_READ_WITH_AUX(map->dpll, i);
570 /* Wait for the clocks to stabilize. */
571 udelay(150);
572
573 /* write it again -- the BIOS does, after all */
574 REG_WRITE_WITH_AUX(map->dpll, dpll, i);
575 REG_READ_WITH_AUX(map->dpll, i);
576 /* Wait for the clocks to stabilize. */
577 udelay(150);
578
579 REG_WRITE_WITH_AUX(map->conf, pipeconf, i);
580 REG_READ_WITH_AUX(map->conf, i);
581 gma_wait_for_vblank(dev);
582
583 REG_WRITE_WITH_AUX(map->cntr, dspcntr, i);
584 gma_wait_for_vblank(dev);
585 }
586
587 oaktrail_crtc_mode_set_exit:
588 gma_power_end(dev);
589 return 0;
590 }
591
oaktrail_pipe_set_base(struct drm_crtc * crtc,int x,int y,struct drm_framebuffer * old_fb)592 static int oaktrail_pipe_set_base(struct drm_crtc *crtc,
593 int x, int y, struct drm_framebuffer *old_fb)
594 {
595 struct drm_device *dev = crtc->dev;
596 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
597 struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
598 struct drm_framebuffer *fb = crtc->primary->fb;
599 int pipe = gma_crtc->pipe;
600 const struct psb_offset *map = &dev_priv->regmap[pipe];
601 unsigned long start, offset;
602
603 u32 dspcntr;
604 int ret = 0;
605
606 /* no fb bound */
607 if (!fb) {
608 dev_dbg(dev->dev, "No FB bound\n");
609 return 0;
610 }
611
612 if (!gma_power_begin(dev, true))
613 return 0;
614
615 start = to_psb_gem_object(fb->obj[0])->offset;
616 offset = y * fb->pitches[0] + x * fb->format->cpp[0];
617
618 REG_WRITE(map->stride, fb->pitches[0]);
619
620 dspcntr = REG_READ(map->cntr);
621 dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
622
623 switch (fb->format->cpp[0] * 8) {
624 case 8:
625 dspcntr |= DISPPLANE_8BPP;
626 break;
627 case 16:
628 if (fb->format->depth == 15)
629 dspcntr |= DISPPLANE_15_16BPP;
630 else
631 dspcntr |= DISPPLANE_16BPP;
632 break;
633 case 24:
634 case 32:
635 dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
636 break;
637 default:
638 dev_err(dev->dev, "Unknown color depth\n");
639 ret = -EINVAL;
640 goto pipe_set_base_exit;
641 }
642 REG_WRITE(map->cntr, dspcntr);
643
644 REG_WRITE(map->base, offset);
645 REG_READ(map->base);
646 REG_WRITE(map->surf, start);
647 REG_READ(map->surf);
648
649 pipe_set_base_exit:
650 gma_power_end(dev);
651 return ret;
652 }
653
654 const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
655 .dpms = oaktrail_crtc_dpms,
656 .mode_set = oaktrail_crtc_mode_set,
657 .mode_set_base = oaktrail_pipe_set_base,
658 .prepare = gma_crtc_prepare,
659 .commit = gma_crtc_commit,
660 };
661
662 /* Not used yet */
663 const struct gma_clock_funcs mrst_clock_funcs = {
664 .clock = mrst_lvds_clock,
665 .limit = mrst_limit,
666 .pll_is_valid = gma_pll_is_valid,
667 };
668