1 /*
2 * Copyright © 2016 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 */
22
23 #include <linux/delay.h>
24 #include <linux/errno.h>
25 #include <linux/export.h>
26 #include <linux/i2c.h>
27 #include <linux/slab.h>
28 #include <linux/string.h>
29
30 #include <drm/display/drm_dp_dual_mode_helper.h>
31 #include <drm/drm_device.h>
32 #include <drm/drm_print.h>
33
34 /**
35 * DOC: dp dual mode helpers
36 *
37 * Helper functions to deal with DP dual mode (aka. DP++) adaptors.
38 *
39 * Type 1:
40 * Adaptor registers (if any) and the sink DDC bus may be accessed via I2C.
41 *
42 * Type 2:
43 * Adaptor registers and sink DDC bus can be accessed either via I2C or
44 * I2C-over-AUX. Source devices may choose to implement either of these
45 * access methods.
46 */
47
48 #define DP_DUAL_MODE_SLAVE_ADDRESS 0x40
49
50 /**
51 * drm_dp_dual_mode_read - Read from the DP dual mode adaptor register(s)
52 * @adapter: I2C adapter for the DDC bus
53 * @offset: register offset
54 * @buffer: buffer for return data
55 * @size: size of the buffer
56 *
57 * Reads @size bytes from the DP dual mode adaptor registers
58 * starting at @offset.
59 *
60 * Returns:
61 * 0 on success, negative error code on failure
62 */
drm_dp_dual_mode_read(struct i2c_adapter * adapter,u8 offset,void * buffer,size_t size)63 ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter,
64 u8 offset, void *buffer, size_t size)
65 {
66 u8 zero = 0;
67 char *tmpbuf = NULL;
68 /*
69 * As sub-addressing is not supported by all adaptors,
70 * always explicitly read from the start and discard
71 * any bytes that come before the requested offset.
72 * This way, no matter whether the adaptor supports it
73 * or not, we'll end up reading the proper data.
74 */
75 struct i2c_msg msgs[] = {
76 {
77 .addr = DP_DUAL_MODE_SLAVE_ADDRESS,
78 .flags = 0,
79 .len = 1,
80 .buf = &zero,
81 },
82 {
83 .addr = DP_DUAL_MODE_SLAVE_ADDRESS,
84 .flags = I2C_M_RD,
85 .len = size + offset,
86 .buf = buffer,
87 },
88 };
89 int ret;
90
91 if (offset) {
92 tmpbuf = kmalloc(size + offset, GFP_KERNEL);
93 if (!tmpbuf)
94 return -ENOMEM;
95
96 msgs[1].buf = tmpbuf;
97 }
98
99 ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
100 if (tmpbuf)
101 memcpy(buffer, tmpbuf + offset, size);
102
103 kfree(tmpbuf);
104
105 if (ret < 0)
106 return ret;
107 if (ret != ARRAY_SIZE(msgs))
108 return -EPROTO;
109
110 return 0;
111 }
112 EXPORT_SYMBOL(drm_dp_dual_mode_read);
113
114 /**
115 * drm_dp_dual_mode_write - Write to the DP dual mode adaptor register(s)
116 * @adapter: I2C adapter for the DDC bus
117 * @offset: register offset
118 * @buffer: buffer for write data
119 * @size: size of the buffer
120 *
121 * Writes @size bytes to the DP dual mode adaptor registers
122 * starting at @offset.
123 *
124 * Returns:
125 * 0 on success, negative error code on failure
126 */
drm_dp_dual_mode_write(struct i2c_adapter * adapter,u8 offset,const void * buffer,size_t size)127 ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter,
128 u8 offset, const void *buffer, size_t size)
129 {
130 struct i2c_msg msg = {
131 .addr = DP_DUAL_MODE_SLAVE_ADDRESS,
132 .flags = 0,
133 .len = 1 + size,
134 .buf = NULL,
135 };
136 void *data;
137 int ret;
138
139 data = kmalloc(msg.len, GFP_KERNEL);
140 if (!data)
141 return -ENOMEM;
142
143 msg.buf = data;
144
145 memcpy(data, &offset, 1);
146 memcpy(data + 1, buffer, size);
147
148 ret = i2c_transfer(adapter, &msg, 1);
149
150 kfree(data);
151
152 if (ret < 0)
153 return ret;
154 if (ret != 1)
155 return -EPROTO;
156
157 return 0;
158 }
159 EXPORT_SYMBOL(drm_dp_dual_mode_write);
160
is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])161 static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
162 {
163 static const char dp_dual_mode_hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] =
164 "DP-HDMI ADAPTOR\x04";
165
166 return memcmp(hdmi_id, dp_dual_mode_hdmi_id,
167 sizeof(dp_dual_mode_hdmi_id)) == 0;
168 }
169
is_type1_adaptor(uint8_t adaptor_id)170 static bool is_type1_adaptor(uint8_t adaptor_id)
171 {
172 return adaptor_id == 0 || adaptor_id == 0xff;
173 }
174
is_type2_adaptor(uint8_t adaptor_id)175 static bool is_type2_adaptor(uint8_t adaptor_id)
176 {
177 return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
178 DP_DUAL_MODE_REV_TYPE2);
179 }
180
is_lspcon_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN],const uint8_t adaptor_id)181 static bool is_lspcon_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN],
182 const uint8_t adaptor_id)
183 {
184 return is_hdmi_adaptor(hdmi_id) &&
185 (adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
186 DP_DUAL_MODE_TYPE_HAS_DPCD));
187 }
188
189 /**
190 * drm_dp_dual_mode_detect - Identify the DP dual mode adaptor
191 * @dev: &drm_device to use
192 * @adapter: I2C adapter for the DDC bus
193 *
194 * Attempt to identify the type of the DP dual mode adaptor used.
195 *
196 * Note that when the answer is @DRM_DP_DUAL_MODE_UNKNOWN it's not
197 * certain whether we're dealing with a native HDMI port or
198 * a type 1 DVI dual mode adaptor. The driver will have to use
199 * some other hardware/driver specific mechanism to make that
200 * distinction.
201 *
202 * Returns:
203 * The type of the DP dual mode adaptor used
204 */
drm_dp_dual_mode_detect(const struct drm_device * dev,struct i2c_adapter * adapter)205 enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(const struct drm_device *dev,
206 struct i2c_adapter *adapter)
207 {
208 char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = {};
209 uint8_t adaptor_id = 0x00;
210 ssize_t ret;
211
212 /*
213 * Let's see if the adaptor is there the by reading the
214 * HDMI ID registers.
215 *
216 * Note that type 1 DVI adaptors are not required to implemnt
217 * any registers, and that presents a problem for detection.
218 * If the i2c transfer is nacked, we may or may not be dealing
219 * with a type 1 DVI adaptor. Some other mechanism of detecting
220 * the presence of the adaptor is required. One way would be
221 * to check the state of the CONFIG1 pin, Another method would
222 * simply require the driver to know whether the port is a DP++
223 * port or a native HDMI port. Both of these methods are entirely
224 * hardware/driver specific so we can't deal with them here.
225 */
226 ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
227 hdmi_id, sizeof(hdmi_id));
228 drm_dbg_kms(dev, "DP dual mode HDMI ID: %*pE (err %zd)\n",
229 ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
230 if (ret)
231 return DRM_DP_DUAL_MODE_UNKNOWN;
232
233 ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
234 &adaptor_id, sizeof(adaptor_id));
235 drm_dbg_kms(dev, "DP dual mode adaptor ID: %02x (err %zd)\n", adaptor_id, ret);
236 if (ret == 0) {
237 if (is_lspcon_adaptor(hdmi_id, adaptor_id))
238 return DRM_DP_DUAL_MODE_LSPCON;
239 if (is_type2_adaptor(adaptor_id)) {
240 if (is_hdmi_adaptor(hdmi_id))
241 return DRM_DP_DUAL_MODE_TYPE2_HDMI;
242 else
243 return DRM_DP_DUAL_MODE_TYPE2_DVI;
244 }
245 /*
246 * If not a proper type 1 ID, still assume type 1, but let
247 * the user know that we may have misdetected the type.
248 */
249 if (!is_type1_adaptor(adaptor_id))
250 drm_err(dev, "Unexpected DP dual mode adaptor ID %02x\n", adaptor_id);
251
252 }
253
254 if (is_hdmi_adaptor(hdmi_id))
255 return DRM_DP_DUAL_MODE_TYPE1_HDMI;
256 else
257 return DRM_DP_DUAL_MODE_TYPE1_DVI;
258 }
259 EXPORT_SYMBOL(drm_dp_dual_mode_detect);
260
261 /**
262 * drm_dp_dual_mode_max_tmds_clock - Max TMDS clock for DP dual mode adaptor
263 * @dev: &drm_device to use
264 * @type: DP dual mode adaptor type
265 * @adapter: I2C adapter for the DDC bus
266 *
267 * Determine the max TMDS clock the adaptor supports based on the
268 * type of the dual mode adaptor and the DP_DUAL_MODE_MAX_TMDS_CLOCK
269 * register (on type2 adaptors). As some type 1 adaptors have
270 * problems with registers (see comments in drm_dp_dual_mode_detect())
271 * we don't read the register on those, instead we simply assume
272 * a 165 MHz limit based on the specification.
273 *
274 * Returns:
275 * Maximum supported TMDS clock rate for the DP dual mode adaptor in kHz.
276 */
drm_dp_dual_mode_max_tmds_clock(const struct drm_device * dev,enum drm_dp_dual_mode_type type,struct i2c_adapter * adapter)277 int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
278 struct i2c_adapter *adapter)
279 {
280 uint8_t max_tmds_clock;
281 ssize_t ret;
282
283 /* native HDMI so no limit */
284 if (type == DRM_DP_DUAL_MODE_NONE)
285 return 0;
286
287 /*
288 * Type 1 adaptors are limited to 165MHz
289 * Type 2 adaptors can tells us their limit
290 */
291 if (type < DRM_DP_DUAL_MODE_TYPE2_DVI)
292 return 165000;
293
294 ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_MAX_TMDS_CLOCK,
295 &max_tmds_clock, sizeof(max_tmds_clock));
296 if (ret || max_tmds_clock == 0x00 || max_tmds_clock == 0xff) {
297 drm_dbg_kms(dev, "Failed to query max TMDS clock\n");
298 return 165000;
299 }
300
301 return max_tmds_clock * 5000 / 2;
302 }
303 EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock);
304
305 /**
306 * drm_dp_dual_mode_get_tmds_output - Get the state of the TMDS output buffers in the DP dual mode adaptor
307 * @dev: &drm_device to use
308 * @type: DP dual mode adaptor type
309 * @adapter: I2C adapter for the DDC bus
310 * @enabled: current state of the TMDS output buffers
311 *
312 * Get the state of the TMDS output buffers in the adaptor. For
313 * type2 adaptors this is queried from the DP_DUAL_MODE_TMDS_OEN
314 * register. As some type 1 adaptors have problems with registers
315 * (see comments in drm_dp_dual_mode_detect()) we don't read the
316 * register on those, instead we simply assume that the buffers
317 * are always enabled.
318 *
319 * Returns:
320 * 0 on success, negative error code on failure
321 */
drm_dp_dual_mode_get_tmds_output(const struct drm_device * dev,enum drm_dp_dual_mode_type type,struct i2c_adapter * adapter,bool * enabled)322 int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev,
323 enum drm_dp_dual_mode_type type, struct i2c_adapter *adapter,
324 bool *enabled)
325 {
326 uint8_t tmds_oen;
327 ssize_t ret;
328
329 if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) {
330 *enabled = true;
331 return 0;
332 }
333
334 ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
335 &tmds_oen, sizeof(tmds_oen));
336 if (ret) {
337 drm_dbg_kms(dev, "Failed to query state of TMDS output buffers\n");
338 return ret;
339 }
340
341 *enabled = !(tmds_oen & DP_DUAL_MODE_TMDS_DISABLE);
342
343 return 0;
344 }
345 EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output);
346
347 /**
348 * drm_dp_dual_mode_set_tmds_output - Enable/disable TMDS output buffers in the DP dual mode adaptor
349 * @dev: &drm_device to use
350 * @type: DP dual mode adaptor type
351 * @adapter: I2C adapter for the DDC bus
352 * @enable: enable (as opposed to disable) the TMDS output buffers
353 *
354 * Set the state of the TMDS output buffers in the adaptor. For
355 * type2 this is set via the DP_DUAL_MODE_TMDS_OEN register.
356 * Type1 adaptors do not support any register writes.
357 *
358 * Returns:
359 * 0 on success, negative error code on failure
360 */
drm_dp_dual_mode_set_tmds_output(const struct drm_device * dev,enum drm_dp_dual_mode_type type,struct i2c_adapter * adapter,bool enable)361 int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
362 struct i2c_adapter *adapter, bool enable)
363 {
364 uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE;
365 ssize_t ret;
366 int retry;
367
368 if (type < DRM_DP_DUAL_MODE_TYPE2_DVI)
369 return 0;
370
371 /*
372 * LSPCON adapters in low-power state may ignore the first write, so
373 * read back and verify the written value a few times.
374 */
375 for (retry = 0; retry < 3; retry++) {
376 uint8_t tmp;
377
378 ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN,
379 &tmds_oen, sizeof(tmds_oen));
380 if (ret) {
381 drm_dbg_kms(dev, "Failed to %s TMDS output buffers (%d attempts)\n",
382 enable ? "enable" : "disable", retry + 1);
383 return ret;
384 }
385
386 ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
387 &tmp, sizeof(tmp));
388 if (ret) {
389 drm_dbg_kms(dev,
390 "I2C read failed during TMDS output buffer %s (%d attempts)\n",
391 enable ? "enabling" : "disabling", retry + 1);
392 return ret;
393 }
394
395 if (tmp == tmds_oen)
396 return 0;
397 }
398
399 drm_dbg_kms(dev, "I2C write value mismatch during TMDS output buffer %s\n",
400 enable ? "enabling" : "disabling");
401
402 return -EIO;
403 }
404 EXPORT_SYMBOL(drm_dp_dual_mode_set_tmds_output);
405
406 /**
407 * drm_dp_get_dual_mode_type_name - Get the name of the DP dual mode adaptor type as a string
408 * @type: DP dual mode adaptor type
409 *
410 * Returns:
411 * String representation of the DP dual mode adaptor type
412 */
drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type)413 const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type)
414 {
415 switch (type) {
416 case DRM_DP_DUAL_MODE_NONE:
417 return "none";
418 case DRM_DP_DUAL_MODE_TYPE1_DVI:
419 return "type 1 DVI";
420 case DRM_DP_DUAL_MODE_TYPE1_HDMI:
421 return "type 1 HDMI";
422 case DRM_DP_DUAL_MODE_TYPE2_DVI:
423 return "type 2 DVI";
424 case DRM_DP_DUAL_MODE_TYPE2_HDMI:
425 return "type 2 HDMI";
426 case DRM_DP_DUAL_MODE_LSPCON:
427 return "lspcon";
428 default:
429 WARN_ON(type != DRM_DP_DUAL_MODE_UNKNOWN);
430 return "unknown";
431 }
432 }
433 EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name);
434
435 /**
436 * drm_lspcon_get_mode: Get LSPCON's current mode of operation by
437 * reading offset (0x80, 0x41)
438 * @dev: &drm_device to use
439 * @adapter: I2C-over-aux adapter
440 * @mode: current lspcon mode of operation output variable
441 *
442 * Returns:
443 * 0 on success, sets the current_mode value to appropriate mode
444 * -error on failure
445 */
drm_lspcon_get_mode(const struct drm_device * dev,struct i2c_adapter * adapter,enum drm_lspcon_mode * mode)446 int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
447 enum drm_lspcon_mode *mode)
448 {
449 u8 data;
450 int ret = 0;
451 int retry;
452
453 if (!mode) {
454 drm_err(dev, "NULL input\n");
455 return -EINVAL;
456 }
457
458 /* Read Status: i2c over aux */
459 for (retry = 0; retry < 6; retry++) {
460 if (retry)
461 usleep_range(500, 1000);
462
463 ret = drm_dp_dual_mode_read(adapter,
464 DP_DUAL_MODE_LSPCON_CURRENT_MODE,
465 &data, sizeof(data));
466 if (!ret)
467 break;
468 }
469
470 if (ret < 0) {
471 drm_dbg_kms(dev, "LSPCON read(0x80, 0x41) failed\n");
472 return -EFAULT;
473 }
474
475 if (data & DP_DUAL_MODE_LSPCON_MODE_PCON)
476 *mode = DRM_LSPCON_MODE_PCON;
477 else
478 *mode = DRM_LSPCON_MODE_LS;
479 return 0;
480 }
481 EXPORT_SYMBOL(drm_lspcon_get_mode);
482
483 /**
484 * drm_lspcon_set_mode: Change LSPCON's mode of operation by
485 * writing offset (0x80, 0x40)
486 * @dev: &drm_device to use
487 * @adapter: I2C-over-aux adapter
488 * @mode: required mode of operation
489 *
490 * Returns:
491 * 0 on success, -error on failure/timeout
492 */
drm_lspcon_set_mode(const struct drm_device * dev,struct i2c_adapter * adapter,enum drm_lspcon_mode mode)493 int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
494 enum drm_lspcon_mode mode)
495 {
496 u8 data = 0;
497 int ret;
498 int time_out = 200;
499 enum drm_lspcon_mode current_mode;
500
501 if (mode == DRM_LSPCON_MODE_PCON)
502 data = DP_DUAL_MODE_LSPCON_MODE_PCON;
503
504 /* Change mode */
505 ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_LSPCON_MODE_CHANGE,
506 &data, sizeof(data));
507 if (ret < 0) {
508 drm_err(dev, "LSPCON mode change failed\n");
509 return ret;
510 }
511
512 /*
513 * Confirm mode change by reading the status bit.
514 * Sometimes, it takes a while to change the mode,
515 * so wait and retry until time out or done.
516 */
517 do {
518 ret = drm_lspcon_get_mode(dev, adapter, ¤t_mode);
519 if (ret) {
520 drm_err(dev, "can't confirm LSPCON mode change\n");
521 return ret;
522 } else {
523 if (current_mode != mode) {
524 msleep(10);
525 time_out -= 10;
526 } else {
527 drm_dbg_kms(dev, "LSPCON mode changed to %s\n",
528 mode == DRM_LSPCON_MODE_LS ? "LS" : "PCON");
529 return 0;
530 }
531 }
532 } while (time_out);
533
534 drm_err(dev, "LSPCON mode change timed out\n");
535 return -ETIMEDOUT;
536 }
537 EXPORT_SYMBOL(drm_lspcon_set_mode);
538