1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * Low-level CPU initialisation 4 * Based on arch/arm/kernel/head.S 5 * 6 * Copyright (C) 1994-2002 Russell King 7 * Copyright (C) 2003-2012 ARM Ltd. 8 * Authors: Catalin Marinas <catalin.marinas@arm.com> 9 * Will Deacon <will.deacon@arm.com> 10 */ 11 12#include <linux/linkage.h> 13#include <linux/init.h> 14#include <linux/pgtable.h> 15 16#include <asm/asm_pointer_auth.h> 17#include <asm/assembler.h> 18#include <asm/boot.h> 19#include <asm/bug.h> 20#include <asm/ptrace.h> 21#include <asm/asm-offsets.h> 22#include <asm/cache.h> 23#include <asm/cputype.h> 24#include <asm/el2_setup.h> 25#include <asm/elf.h> 26#include <asm/image.h> 27#include <asm/kernel-pgtable.h> 28#include <asm/kvm_arm.h> 29#include <asm/memory.h> 30#include <asm/pgtable-hwdef.h> 31#include <asm/page.h> 32#include <asm/scs.h> 33#include <asm/smp.h> 34#include <asm/sysreg.h> 35#include <asm/stacktrace/frame.h> 36#include <asm/thread_info.h> 37#include <asm/virt.h> 38 39#include "efi-header.S" 40 41#if (PAGE_OFFSET & 0x1fffff) != 0 42#error PAGE_OFFSET must be at least 2MB aligned 43#endif 44 45/* 46 * Kernel startup entry point. 47 * --------------------------- 48 * 49 * The requirements are: 50 * MMU = off, D-cache = off, I-cache = on or off, 51 * x0 = physical address to the FDT blob. 52 * 53 * Note that the callee-saved registers are used for storing variables 54 * that are useful before the MMU is enabled. The allocations are described 55 * in the entry routines. 56 */ 57 __HEAD 58 /* 59 * DO NOT MODIFY. Image header expected by Linux boot-loaders. 60 */ 61 efi_signature_nop // special NOP to identity as PE/COFF executable 62 b primary_entry // branch to kernel start, magic 63 .quad 0 // Image load offset from start of RAM, little-endian 64 le64sym _kernel_size_le // Effective size of kernel image, little-endian 65 le64sym _kernel_flags_le // Informative flags, little-endian 66 .quad 0 // reserved 67 .quad 0 // reserved 68 .quad 0 // reserved 69 .ascii ARM64_IMAGE_MAGIC // Magic number 70 .long .Lpe_header_offset // Offset to the PE header. 71 72 __EFI_PE_HEADER 73 74 .section ".idmap.text","a" 75 76 /* 77 * The following callee saved general purpose registers are used on the 78 * primary lowlevel boot path: 79 * 80 * Register Scope Purpose 81 * x19 primary_entry() .. start_kernel() whether we entered with the MMU on 82 * x20 primary_entry() .. __primary_switch() CPU boot mode 83 * x21 primary_entry() .. start_kernel() FDT pointer passed at boot in x0 84 */ 85SYM_CODE_START(primary_entry) 86 bl record_mmu_state 87 bl preserve_boot_args 88 89 adrp x1, early_init_stack 90 mov sp, x1 91 mov x29, xzr 92 adrp x0, init_idmap_pg_dir 93 mov x1, xzr 94 bl __pi_create_init_idmap 95 96 /* 97 * If the page tables have been populated with non-cacheable 98 * accesses (MMU disabled), invalidate those tables again to 99 * remove any speculatively loaded cache lines. 100 */ 101 cbnz x19, 0f 102 dmb sy 103 mov x1, x0 // end of used region 104 adrp x0, init_idmap_pg_dir 105 adr_l x2, dcache_inval_poc 106 blr x2 107 b 1f 108 109 /* 110 * If we entered with the MMU and caches on, clean the ID mapped part 111 * of the primary boot code to the PoC so we can safely execute it with 112 * the MMU off. 113 */ 1140: adrp x0, __idmap_text_start 115 adr_l x1, __idmap_text_end 116 adr_l x2, dcache_clean_poc 117 blr x2 118 1191: mov x0, x19 120 bl init_kernel_el // w0=cpu_boot_mode 121 mov x20, x0 122 123 /* 124 * The following calls CPU setup code, see arch/arm64/mm/proc.S for 125 * details. 126 * On return, the CPU will be ready for the MMU to be turned on and 127 * the TCR will have been set. 128 */ 129 bl __cpu_setup // initialise processor 130 b __primary_switch 131SYM_CODE_END(primary_entry) 132 133 __INIT 134SYM_CODE_START_LOCAL(record_mmu_state) 135 mrs x19, CurrentEL 136 cmp x19, #CurrentEL_EL2 137 mrs x19, sctlr_el1 138 b.ne 0f 139 mrs x19, sctlr_el2 1400: 141CPU_LE( tbnz x19, #SCTLR_ELx_EE_SHIFT, 1f ) 142CPU_BE( tbz x19, #SCTLR_ELx_EE_SHIFT, 1f ) 143 tst x19, #SCTLR_ELx_C // Z := (C == 0) 144 and x19, x19, #SCTLR_ELx_M // isolate M bit 145 csel x19, xzr, x19, eq // clear x19 if Z 146 ret 147 148 /* 149 * Set the correct endianness early so all memory accesses issued 150 * before init_kernel_el() occur in the correct byte order. Note that 151 * this means the MMU must be disabled, or the active ID map will end 152 * up getting interpreted with the wrong byte order. 153 */ 1541: eor x19, x19, #SCTLR_ELx_EE 155 bic x19, x19, #SCTLR_ELx_M 156 b.ne 2f 157 pre_disable_mmu_workaround 158 msr sctlr_el2, x19 159 b 3f 1602: pre_disable_mmu_workaround 161 msr sctlr_el1, x19 1623: isb 163 mov x19, xzr 164 ret 165SYM_CODE_END(record_mmu_state) 166 167/* 168 * Preserve the arguments passed by the bootloader in x0 .. x3 169 */ 170SYM_CODE_START_LOCAL(preserve_boot_args) 171 mov x21, x0 // x21=FDT 172 173 adr_l x0, boot_args // record the contents of 174 stp x21, x1, [x0] // x0 .. x3 at kernel entry 175 stp x2, x3, [x0, #16] 176 177 cbnz x19, 0f // skip cache invalidation if MMU is on 178 dmb sy // needed before dc ivac with 179 // MMU off 180 181 add x1, x0, #0x20 // 4 x 8 bytes 182 b dcache_inval_poc // tail call 1830: str_l x19, mmu_enabled_at_boot, x0 184 ret 185SYM_CODE_END(preserve_boot_args) 186 187 /* 188 * Initialize CPU registers with task-specific and cpu-specific context. 189 * 190 * Create a final frame record at task_pt_regs(current)->stackframe, so 191 * that the unwinder can identify the final frame record of any task by 192 * its location in the task stack. We reserve the entire pt_regs space 193 * for consistency with user tasks and kthreads. 194 */ 195 .macro init_cpu_task tsk, tmp1, tmp2 196 msr sp_el0, \tsk 197 198 ldr \tmp1, [\tsk, #TSK_STACK] 199 add sp, \tmp1, #THREAD_SIZE 200 sub sp, sp, #PT_REGS_SIZE 201 202 stp xzr, xzr, [sp, #S_STACKFRAME] 203 mov \tmp1, #FRAME_META_TYPE_FINAL 204 str \tmp1, [sp, #S_STACKFRAME_TYPE] 205 add x29, sp, #S_STACKFRAME 206 207 scs_load_current 208 209 adr_l \tmp1, __per_cpu_offset 210 ldr w\tmp2, [\tsk, #TSK_TI_CPU] 211 ldr \tmp1, [\tmp1, \tmp2, lsl #3] 212 set_this_cpu_offset \tmp1 213 .endm 214 215/* 216 * The following fragment of code is executed with the MMU enabled. 217 * 218 * x0 = __pa(KERNEL_START) 219 */ 220SYM_FUNC_START_LOCAL(__primary_switched) 221 adr_l x4, init_task 222 init_cpu_task x4, x5, x6 223 224 adr_l x8, vectors // load VBAR_EL1 with virtual 225 msr vbar_el1, x8 // vector table address 226 isb 227 228 stp x29, x30, [sp, #-16]! 229 mov x29, sp 230 231 str_l x21, __fdt_pointer, x5 // Save FDT pointer 232 233 adrp x4, _text // Save the offset between 234 sub x4, x4, x0 // the kernel virtual and 235 str_l x4, kimage_voffset, x5 // physical mappings 236 237 mov x0, x20 238 bl set_cpu_boot_mode_flag 239 240#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) 241 bl kasan_early_init 242#endif 243 mov x0, x20 244 bl finalise_el2 // Prefer VHE if possible 245 ldp x29, x30, [sp], #16 246 bl start_kernel 247 ASM_BUG() 248SYM_FUNC_END(__primary_switched) 249 250/* 251 * end early head section, begin head code that is also used for 252 * hotplug and needs to have the same protections as the text region 253 */ 254 .section ".idmap.text","a" 255 256/* 257 * Starting from EL2 or EL1, configure the CPU to execute at the highest 258 * reachable EL supported by the kernel in a chosen default state. If dropping 259 * from EL2 to EL1, configure EL2 before configuring EL1. 260 * 261 * Since we cannot always rely on ERET synchronizing writes to sysregs (e.g. if 262 * SCTLR_ELx.EOS is clear), we place an ISB prior to ERET. 263 * 264 * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if 265 * booted in EL1 or EL2 respectively, with the top 32 bits containing 266 * potential context flags. These flags are *not* stored in __boot_cpu_mode. 267 * 268 * x0: whether we are being called from the primary boot path with the MMU on 269 */ 270SYM_FUNC_START(init_kernel_el) 271 mrs x1, CurrentEL 272 cmp x1, #CurrentEL_EL2 273 b.eq init_el2 274 275SYM_INNER_LABEL(init_el1, SYM_L_LOCAL) 276 mov_q x0, INIT_SCTLR_EL1_MMU_OFF 277 pre_disable_mmu_workaround 278 msr sctlr_el1, x0 279 isb 280 mov_q x0, INIT_PSTATE_EL1 281 msr spsr_el1, x0 282 msr elr_el1, lr 283 mov w0, #BOOT_CPU_MODE_EL1 284 eret 285 286SYM_INNER_LABEL(init_el2, SYM_L_LOCAL) 287 msr elr_el2, lr 288 289 // clean all HYP code to the PoC if we booted at EL2 with the MMU on 290 cbz x0, 0f 291 adrp x0, __hyp_idmap_text_start 292 adr_l x1, __hyp_text_end 293 adr_l x2, dcache_clean_poc 294 blr x2 295 296 mov_q x0, INIT_SCTLR_EL2_MMU_OFF 297 pre_disable_mmu_workaround 298 msr sctlr_el2, x0 299 isb 3000: 301 302 init_el2_hcr HCR_HOST_NVHE_FLAGS 303 init_el2_state 304 305 /* Hypervisor stub */ 306 adr_l x0, __hyp_stub_vectors 307 msr vbar_el2, x0 308 isb 309 310 mov_q x1, INIT_SCTLR_EL1_MMU_OFF 311 312 mrs x0, hcr_el2 313 and x0, x0, #HCR_E2H 314 cbz x0, 2f 315 316 /* Set a sane SCTLR_EL1, the VHE way */ 317 msr_s SYS_SCTLR_EL12, x1 318 mov x2, #BOOT_CPU_FLAG_E2H 319 b 3f 320 3212: 322 msr sctlr_el1, x1 323 mov x2, xzr 3243: 325 mov x0, #INIT_PSTATE_EL1 326 msr spsr_el2, x0 327 328 mov w0, #BOOT_CPU_MODE_EL2 329 orr x0, x0, x2 330 eret 331SYM_FUNC_END(init_kernel_el) 332 333 /* 334 * This provides a "holding pen" for platforms to hold all secondary 335 * cores are held until we're ready for them to initialise. 336 */ 337SYM_FUNC_START(secondary_holding_pen) 338 mov x0, xzr 339 bl init_kernel_el // w0=cpu_boot_mode 340 mrs x2, mpidr_el1 341 mov_q x1, MPIDR_HWID_BITMASK 342 and x2, x2, x1 343 adr_l x3, secondary_holding_pen_release 344pen: ldr x4, [x3] 345 cmp x4, x2 346 b.eq secondary_startup 347 wfe 348 b pen 349SYM_FUNC_END(secondary_holding_pen) 350 351 /* 352 * Secondary entry point that jumps straight into the kernel. Only to 353 * be used where CPUs are brought online dynamically by the kernel. 354 */ 355SYM_FUNC_START(secondary_entry) 356 mov x0, xzr 357 bl init_kernel_el // w0=cpu_boot_mode 358 b secondary_startup 359SYM_FUNC_END(secondary_entry) 360 361SYM_FUNC_START_LOCAL(secondary_startup) 362 /* 363 * Common entry point for secondary CPUs. 364 */ 365 mov x20, x0 // preserve boot mode 366 367#ifdef CONFIG_ARM64_VA_BITS_52 368alternative_if ARM64_HAS_VA52 369 bl __cpu_secondary_check52bitva 370alternative_else_nop_endif 371#endif 372 373 bl __cpu_setup // initialise processor 374 adrp x1, swapper_pg_dir 375 adrp x2, idmap_pg_dir 376 bl __enable_mmu 377 ldr x8, =__secondary_switched 378 br x8 379SYM_FUNC_END(secondary_startup) 380 381 .text 382SYM_FUNC_START_LOCAL(__secondary_switched) 383 mov x0, x20 384 bl set_cpu_boot_mode_flag 385 386 mov x0, x20 387 bl finalise_el2 388 389 str_l xzr, __early_cpu_boot_status, x3 390 adr_l x5, vectors 391 msr vbar_el1, x5 392 isb 393 394 adr_l x0, secondary_data 395 ldr x2, [x0, #CPU_BOOT_TASK] 396 cbz x2, __secondary_too_slow 397 398 init_cpu_task x2, x1, x3 399 400#ifdef CONFIG_ARM64_PTR_AUTH 401 ptrauth_keys_init_cpu x2, x3, x4, x5 402#endif 403 404 bl secondary_start_kernel 405 ASM_BUG() 406SYM_FUNC_END(__secondary_switched) 407 408SYM_FUNC_START_LOCAL(__secondary_too_slow) 409 wfe 410 wfi 411 b __secondary_too_slow 412SYM_FUNC_END(__secondary_too_slow) 413 414/* 415 * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed 416 * in w0. See arch/arm64/include/asm/virt.h for more info. 417 */ 418SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag) 419 adr_l x1, __boot_cpu_mode 420 cmp w0, #BOOT_CPU_MODE_EL2 421 b.ne 1f 422 add x1, x1, #4 4231: str w0, [x1] // Save CPU boot mode 424 ret 425SYM_FUNC_END(set_cpu_boot_mode_flag) 426 427/* 428 * The booting CPU updates the failed status @__early_cpu_boot_status, 429 * with MMU turned off. 430 * 431 * update_early_cpu_boot_status tmp, status 432 * - Corrupts tmp1, tmp2 433 * - Writes 'status' to __early_cpu_boot_status and makes sure 434 * it is committed to memory. 435 */ 436 437 .macro update_early_cpu_boot_status status, tmp1, tmp2 438 mov \tmp2, #\status 439 adr_l \tmp1, __early_cpu_boot_status 440 str \tmp2, [\tmp1] 441 dmb sy 442 dc ivac, \tmp1 // Invalidate potentially stale cache line 443 .endm 444 445/* 446 * Enable the MMU. 447 * 448 * x0 = SCTLR_EL1 value for turning on the MMU. 449 * x1 = TTBR1_EL1 value 450 * x2 = ID map root table address 451 * 452 * Returns to the caller via x30/lr. This requires the caller to be covered 453 * by the .idmap.text section. 454 * 455 * Checks if the selected granule size is supported by the CPU. 456 * If it isn't, park the CPU 457 */ 458 .section ".idmap.text","a" 459SYM_FUNC_START(__enable_mmu) 460 mrs x3, ID_AA64MMFR0_EL1 461 ubfx x3, x3, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4 462 cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN 463 b.lt __no_granule_support 464 cmp x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX 465 b.gt __no_granule_support 466 phys_to_ttbr x2, x2 467 msr ttbr0_el1, x2 // load TTBR0 468 load_ttbr1 x1, x1, x3 469 470 set_sctlr_el1 x0 471 472 ret 473SYM_FUNC_END(__enable_mmu) 474 475#ifdef CONFIG_ARM64_VA_BITS_52 476SYM_FUNC_START(__cpu_secondary_check52bitva) 477#ifndef CONFIG_ARM64_LPA2 478 mrs_s x0, SYS_ID_AA64MMFR2_EL1 479 and x0, x0, ID_AA64MMFR2_EL1_VARange_MASK 480 cbnz x0, 2f 481#else 482 mrs x0, id_aa64mmfr0_el1 483 sbfx x0, x0, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4 484 cmp x0, #ID_AA64MMFR0_EL1_TGRAN_LPA2 485 b.ge 2f 486#endif 487 488 update_early_cpu_boot_status \ 489 CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_52_BIT_VA, x0, x1 4901: wfe 491 wfi 492 b 1b 493 4942: ret 495SYM_FUNC_END(__cpu_secondary_check52bitva) 496#endif 497 498SYM_FUNC_START_LOCAL(__no_granule_support) 499 /* Indicate that this CPU can't boot and is stuck in the kernel */ 500 update_early_cpu_boot_status \ 501 CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_NO_GRAN, x1, x2 5021: 503 wfe 504 wfi 505 b 1b 506SYM_FUNC_END(__no_granule_support) 507 508SYM_FUNC_START_LOCAL(__primary_switch) 509 adrp x1, reserved_pg_dir 510 adrp x2, init_idmap_pg_dir 511 bl __enable_mmu 512 513 adrp x1, early_init_stack 514 mov sp, x1 515 mov x29, xzr 516 mov x0, x20 // pass the full boot status 517 mov x1, x21 // pass the FDT 518 bl __pi_early_map_kernel // Map and relocate the kernel 519 520 ldr x8, =__primary_switched 521 adrp x0, KERNEL_START // __pa(KERNEL_START) 522 br x8 523SYM_FUNC_END(__primary_switch) 524