1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
3 *
4 * Copyright (c) 2010-2012 Semihalf
5 * Copyright (c) 2012 The FreeBSD Foundation
6 * Copyright (c) 2013 Ian Lepore <ian@freebsd.org>
7 * All rights reserved.
8 *
9 * Portions of this software were developed by Oleksandr Rybalko
10 * under sponsorship from the FreeBSD Foundation.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 *
21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 */
33
34 #include <sys/cdefs.h>
35 /*
36 * EHCI driver for Freescale i.MX SoCs which incorporate the USBOH3 controller.
37 */
38
39 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/kernel.h>
42 #include <sys/module.h>
43 #include <sys/bus.h>
44 #include <sys/condvar.h>
45 #include <sys/rman.h>
46
47 #include <dev/ofw/ofw_bus.h>
48 #include <dev/ofw/ofw_bus_subr.h>
49
50 #include <dev/usb/usb.h>
51 #include <dev/usb/usbdi.h>
52 #include <dev/usb/usb_busdma.h>
53 #include <dev/usb/usb_process.h>
54 #include <dev/usb/usb_controller.h>
55 #include <dev/usb/usb_bus.h>
56 #include <dev/usb/controller/ehci.h>
57 #include <dev/usb/controller/ehcireg.h>
58 #include "usbdevs.h"
59
60 #include <machine/bus.h>
61 #include <machine/resource.h>
62
63 #include <arm/freescale/imx/imx_ccmvar.h>
64
65 #include "opt_platform.h"
66
67 /*
68 * Notes on the hardware and related FDT data seen in the wild.
69 *
70 * There are two sets of registers in the USBOH3 implementation; documentation
71 * refers to them as "core" and "non-core" registers. A set of core register
72 * exists for each OTG or EHCI device. There is a single set of non-core
73 * registers per USBOH3, and they control aspects of operation not directly
74 * related to the USB specs, such as whether interrupts from each of the core
75 * devices are able to generate a SoC wakeup event.
76 *
77 * In the FreeBSD universe we might be inclined to describe the core and
78 * non-core registers by using a pair of resource address/size values (two
79 * entries in the reg property for each core). However, we have to work with
80 * existing FDT data (which mostly comes from the linux universe), and the way
81 * they've chosen to represent this is with an entry for a "usbmisc" device
82 * whose reg property describes the non-core registers. The way we handle FDT
83 * data, this means that the resources (memory-mapped register range) for the
84 * non-core registers belongs to a device other than the echi devices.
85 *
86 * Because the main ehci device cannot access registers in a range that's
87 * defined in the fdt data as belonging to another device, we implement a teeny
88 * little "usbmisc" driver which exists only to provide access to the usbmisc
89 * control register for each of the 4 usb controller instances. That little
90 * driver is implemented here in this file, before the main driver.
91 *
92 * In addition to the single usbmisc device, the existing FDT data defines a
93 * separate device for each of the OTG or EHCI cores within the USBOH3. Each of
94 * those devices has a set of core registers described by the reg property.
95 *
96 * The core registers for each of the four cores in the USBOH3 are divided into
97 * two parts: a set of imx-specific registers at an offset of 0 from the
98 * beginning of the register range, and the standard USB (EHCI or OTG) registers
99 * at an offset of 0x100 from the beginning of the register range. The FreeBSD
100 * way of dealing with this might be to map out two ranges in the reg property,
101 * but that's not what the alternate universe has done. To work with existing
102 * FDT data, we acquire the resource that maps all the core registers, then use
103 * bus_space_subregion() to create another resource that maps just the standard
104 * USB registers, which we provide to the standard USB code in the ehci_softc.
105 *
106 * The following compat strings have been seen for the OTG and EHCI cores. The
107 * FDT compat table in this driver contains all these strings, but as of this
108 * writing, not all of these SoCs have been tested with the driver. The fact
109 * that imx27 is common to all of them gives some hope that the driver will work
110 * on all these SoCs.
111 * - "fsl,imx23-usb", "fsl,imx27-usb";
112 * - "fsl,imx25-usb", "fsl,imx27-usb";
113 * - "fsl,imx28-usb", "fsl,imx27-usb";
114 * - "fsl,imx51-usb", "fsl,imx27-usb";
115 * - "fsl,imx53-usb", "fsl,imx27-usb";
116 * - "fsl,imx6q-usb", "fsl,imx27-usb";
117 *
118 * The FDT data for some SoCs contains the following properties, which we don't
119 * currently do anything with:
120 * - fsl,usbmisc = <&usbmisc 0>;
121 * - fsl,usbphy = <&usbphy0>;
122 *
123 * Some imx SoCs have FDT data related to USB PHY, some don't. We have separate
124 * usbphy drivers where needed; this data is mentioned here just to keep all the
125 * imx-FDT-usb-related info in one place. Here are the usbphy compat strings
126 * known to exist:
127 * - "nop-usbphy"
128 * - "usb-nop-xceiv";
129 * - "fsl,imx23-usbphy"
130 * - "fsl,imx28-usbphy", "fsl,imx23-usbphy";
131 * - "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
132 *
133 */
134
135 /*-----------------------------------------------------------------------------
136 * imx_usbmisc driver
137 *---------------------------------------------------------------------------*/
138
139 #define USBNC_OVER_CUR_POL (1u << 8)
140 #define USBNC_OVER_CUR_DIS (1u << 7)
141
142 struct imx_usbmisc_softc {
143 device_t dev;
144 struct resource *mmio;
145 };
146
147 static struct ofw_compat_data usbmisc_compat_data[] = {
148 {"fsl,imx6q-usbmisc", true},
149 {"fsl,imx51-usbmisc", true},
150 {"fsl,imx25-usbmisc", true},
151 {NULL, false},
152 };
153
154 static void
imx_usbmisc_set_ctrl(device_t dev,u_int index,uint32_t bits)155 imx_usbmisc_set_ctrl(device_t dev, u_int index, uint32_t bits)
156 {
157 struct imx_usbmisc_softc *sc;
158 uint32_t reg;
159
160 sc = device_get_softc(dev);
161 reg = bus_read_4(sc->mmio, index * sizeof(uint32_t));
162 bus_write_4(sc->mmio, index * sizeof(uint32_t), reg | bits);
163 }
164
165 #ifdef notyet
166 static void
imx_usbmisc_clr_ctrl(device_t dev,u_int index,uint32_t bits)167 imx_usbmisc_clr_ctrl(device_t dev, u_int index, uint32_t bits)
168 {
169 struct imx_usbmisc_softc *sc;
170 uint32_t reg;
171
172 sc = device_get_softc(dev);
173 reg = bus_read_4(sc->mmio, index * sizeof(uint32_t));
174 bus_write_4(sc->mmio, index * sizeof(uint32_t), reg & ~bits);
175 }
176 #endif
177
178 static int
imx_usbmisc_probe(device_t dev)179 imx_usbmisc_probe(device_t dev)
180 {
181
182 if (!ofw_bus_status_okay(dev))
183 return (ENXIO);
184
185 if (ofw_bus_search_compatible(dev, usbmisc_compat_data)->ocd_data) {
186 device_set_desc(dev, "i.MX USB Misc Control");
187 return (BUS_PROBE_DEFAULT);
188 }
189 return (ENXIO);
190 }
191
192 static int
imx_usbmisc_detach(device_t dev)193 imx_usbmisc_detach(device_t dev)
194 {
195 struct imx_usbmisc_softc *sc;
196
197 sc = device_get_softc(dev);
198
199 if (sc->mmio != NULL)
200 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mmio);
201
202 return (0);
203 }
204
205 static int
imx_usbmisc_attach(device_t dev)206 imx_usbmisc_attach(device_t dev)
207 {
208 struct imx_usbmisc_softc *sc;
209 int rid;
210
211 sc = device_get_softc(dev);
212
213 /* Allocate bus_space resources. */
214 rid = 0;
215 sc->mmio = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
216 RF_ACTIVE);
217 if (sc->mmio == NULL) {
218 device_printf(dev, "Cannot allocate memory resources\n");
219 return (ENXIO);
220 }
221
222 OF_device_register_xref(OF_xref_from_node(ofw_bus_get_node(dev)), dev);
223
224 return (0);
225 }
226
227 static device_method_t imx_usbmisc_methods[] = {
228 /* Device interface */
229 DEVMETHOD(device_probe, imx_usbmisc_probe),
230 DEVMETHOD(device_attach, imx_usbmisc_attach),
231 DEVMETHOD(device_detach, imx_usbmisc_detach),
232
233 DEVMETHOD_END
234 };
235
236 static driver_t imx_usbmisc_driver = {
237 "imx_usbmisc",
238 imx_usbmisc_methods,
239 sizeof(struct imx_usbmisc_softc)
240 };
241
242 /*
243 * This driver needs to start before the ehci driver, but later than the usual
244 * "special" drivers like clocks and cpu. Ehci starts at DEFAULT so
245 * DEFAULT-1000 seems good.
246 */
247 EARLY_DRIVER_MODULE(imx_usbmisc, simplebus, imx_usbmisc_driver,
248 0, 0, BUS_PASS_DEFAULT - 1000);
249
250 /*-----------------------------------------------------------------------------
251 * imx_ehci driver...
252 *---------------------------------------------------------------------------*/
253
254 /*
255 * Each EHCI device in the SoC has some SoC-specific per-device registers at an
256 * offset of 0, then the standard EHCI registers begin at an offset of 0x100.
257 */
258 #define IMX_EHCI_REG_OFF 0x100
259 #define IMX_EHCI_REG_SIZE 0x100
260
261 struct imx_ehci_softc {
262 ehci_softc_t ehci_softc;
263 device_t dev;
264 struct resource *ehci_mem_res; /* EHCI core regs. */
265 struct resource *ehci_irq_res; /* EHCI core IRQ. */
266 };
267
268 static struct ofw_compat_data compat_data[] = {
269 {"fsl,imx6q-usb", 1},
270 {"fsl,imx53-usb", 1},
271 {"fsl,imx51-usb", 1},
272 {"fsl,imx28-usb", 1},
273 {"fsl,imx27-usb", 1},
274 {"fsl,imx25-usb", 1},
275 {"fsl,imx23-usb", 1},
276 {NULL, 0},
277 };
278
279 static void
imx_ehci_post_reset(struct ehci_softc * ehci_softc)280 imx_ehci_post_reset(struct ehci_softc *ehci_softc)
281 {
282 uint32_t usbmode;
283
284 /* Force HOST mode */
285 usbmode = EOREAD4(ehci_softc, EHCI_USBMODE_NOLPM);
286 usbmode &= ~EHCI_UM_CM;
287 usbmode |= EHCI_UM_CM_HOST;
288 EOWRITE4(ehci_softc, EHCI_USBMODE_NOLPM, usbmode);
289 }
290
291 static int
imx_ehci_probe(device_t dev)292 imx_ehci_probe(device_t dev)
293 {
294
295 if (!ofw_bus_status_okay(dev))
296 return (ENXIO);
297
298 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
299 device_set_desc(dev, "Freescale i.MX integrated USB controller");
300 return (BUS_PROBE_DEFAULT);
301 }
302 return (ENXIO);
303 }
304
305 static int
imx_ehci_detach(device_t dev)306 imx_ehci_detach(device_t dev)
307 {
308 struct imx_ehci_softc *sc;
309 ehci_softc_t *esc;
310 int err;
311
312 sc = device_get_softc(dev);
313
314 esc = &sc->ehci_softc;
315
316 /* First detach all children; we can't detach if that fails. */
317 if ((err = bus_generic_detach(dev)) != 0)
318 return (err);
319
320 if (esc->sc_flags & EHCI_SCFLG_DONEINIT)
321 ehci_detach(esc);
322 if (esc->sc_intr_hdl != NULL)
323 bus_teardown_intr(dev, esc->sc_irq_res,
324 esc->sc_intr_hdl);
325 if (sc->ehci_irq_res != NULL)
326 bus_release_resource(dev, SYS_RES_IRQ, 0,
327 sc->ehci_irq_res);
328 if (sc->ehci_mem_res != NULL)
329 bus_release_resource(dev, SYS_RES_MEMORY, 0,
330 sc->ehci_mem_res);
331
332 usb_bus_mem_free_all(&esc->sc_bus, &ehci_iterate_hw_softc);
333
334 return (0);
335 }
336
337 static void
imx_ehci_disable_oc(struct imx_ehci_softc * sc)338 imx_ehci_disable_oc(struct imx_ehci_softc *sc)
339 {
340 device_t usbmdev;
341 pcell_t usbmprops[2];
342 phandle_t node;
343 ssize_t size;
344 int index;
345
346 /* Get the reference to the usbmisc driver from the fdt data */
347 node = ofw_bus_get_node(sc->dev);
348 size = OF_getencprop(node, "fsl,usbmisc", usbmprops,
349 sizeof(usbmprops));
350 if (size < sizeof(usbmprops)) {
351 device_printf(sc->dev, "failed to retrieve fsl,usbmisc "
352 "property, cannot disable overcurrent protection");
353 return;
354 }
355 /* Retrieve the device_t via the xref handle. */
356 usbmdev = OF_device_from_xref(usbmprops[0]);
357 if (usbmdev == NULL) {
358 device_printf(sc->dev, "usbmisc device not found, "
359 "cannot disable overcurrent protection");
360 return;
361 }
362 /* Call the device routine to set the overcurrent disable bit. */
363 index = usbmprops[1];
364 imx_usbmisc_set_ctrl(usbmdev, index, USBNC_OVER_CUR_DIS);
365 }
366
367 static int
imx_ehci_attach(device_t dev)368 imx_ehci_attach(device_t dev)
369 {
370 struct imx_ehci_softc *sc;
371 ehci_softc_t *esc;
372 int err, rid;
373
374 sc = device_get_softc(dev);
375 sc->dev = dev;
376 esc = &sc->ehci_softc;
377 err = 0;
378
379 /* Allocate bus_space resources. */
380 rid = 0;
381 sc->ehci_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
382 RF_ACTIVE);
383 if (sc->ehci_mem_res == NULL) {
384 device_printf(dev, "Cannot allocate memory resources\n");
385 err = ENXIO;
386 goto out;
387 }
388
389 rid = 0;
390 sc->ehci_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
391 RF_ACTIVE);
392 if (sc->ehci_irq_res == NULL) {
393 device_printf(dev, "Cannot allocate IRQ resources\n");
394 err = ENXIO;
395 goto out;
396 }
397
398 esc->sc_io_tag = rman_get_bustag(sc->ehci_mem_res);
399 esc->sc_bus.parent = dev;
400 esc->sc_bus.devices = esc->sc_devices;
401 esc->sc_bus.devices_max = EHCI_MAX_DEVICES;
402 esc->sc_bus.dma_bits = 32;
403
404 /* allocate all DMA memory */
405 if (usb_bus_mem_alloc_all(&esc->sc_bus, USB_GET_DMA_TAG(dev),
406 &ehci_iterate_hw_softc) != 0) {
407 device_printf(dev, "usb_bus_mem_alloc_all() failed\n");
408 err = ENOMEM;
409 goto out;
410 }
411
412 /*
413 * Set handle to USB related registers subregion used by
414 * generic EHCI driver.
415 */
416 err = bus_space_subregion(esc->sc_io_tag,
417 rman_get_bushandle(sc->ehci_mem_res),
418 IMX_EHCI_REG_OFF, IMX_EHCI_REG_SIZE, &esc->sc_io_hdl);
419 if (err != 0) {
420 device_printf(dev, "bus_space_subregion() failed\n");
421 err = ENXIO;
422 goto out;
423 }
424
425 /* Setup interrupt handler. */
426 err = bus_setup_intr(dev, sc->ehci_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
427 NULL, (driver_intr_t *)ehci_interrupt, esc, &esc->sc_intr_hdl);
428 if (err != 0) {
429 device_printf(dev, "Could not setup IRQ\n");
430 goto out;
431 }
432
433 /* Turn on clocks. */
434 imx_ccm_usb_enable(dev);
435
436 /* Disable overcurrent detection, if configured to do so. */
437 if (OF_hasprop(ofw_bus_get_node(sc->dev), "disable-over-current"))
438 imx_ehci_disable_oc(sc);
439
440 /* Add USB bus device. */
441 esc->sc_bus.bdev = device_add_child(dev, "usbus", DEVICE_UNIT_ANY);
442 if (esc->sc_bus.bdev == NULL) {
443 device_printf(dev, "Could not add USB device\n");
444 goto out;
445 }
446 device_set_ivars(esc->sc_bus.bdev, &esc->sc_bus);
447
448 esc->sc_id_vendor = USB_VENDOR_FREESCALE;
449 strlcpy(esc->sc_vendor, "Freescale", sizeof(esc->sc_vendor));
450
451 /*
452 * Set flags that affect ehci_init() behavior, and hook our post-reset
453 * code into the standard controller code.
454 */
455 esc->sc_flags |= EHCI_SCFLG_NORESTERM | EHCI_SCFLG_TT;
456 esc->sc_vendor_post_reset = imx_ehci_post_reset;
457 esc->sc_vendor_get_port_speed = ehci_get_port_speed_portsc;
458
459 err = ehci_init(esc);
460 if (err != 0) {
461 device_printf(dev, "USB init failed, usb_err_t=%d\n",
462 err);
463 goto out;
464 }
465 esc->sc_flags |= EHCI_SCFLG_DONEINIT;
466
467 /* Probe the bus. */
468 err = device_probe_and_attach(esc->sc_bus.bdev);
469 if (err != 0) {
470 device_printf(dev,
471 "device_probe_and_attach() failed\n");
472 goto out;
473 }
474
475 err = 0;
476
477 out:
478
479 if (err != 0)
480 imx_ehci_detach(dev);
481
482 return (err);
483 }
484
485 static device_method_t ehci_methods[] = {
486 /* Device interface */
487 DEVMETHOD(device_probe, imx_ehci_probe),
488 DEVMETHOD(device_attach, imx_ehci_attach),
489 DEVMETHOD(device_detach, imx_ehci_detach),
490 DEVMETHOD(device_suspend, bus_generic_suspend),
491 DEVMETHOD(device_resume, bus_generic_resume),
492 DEVMETHOD(device_shutdown, bus_generic_shutdown),
493
494 /* Bus interface */
495 DEVMETHOD(bus_print_child, bus_generic_print_child),
496
497 DEVMETHOD_END
498 };
499
500 static driver_t ehci_driver = {
501 "ehci",
502 ehci_methods,
503 sizeof(struct imx_ehci_softc)
504 };
505
506 DRIVER_MODULE(imx_ehci, simplebus, ehci_driver, 0, 0);
507 MODULE_DEPEND(imx_ehci, usb, 1, 1, 1);
508