xref: /linux/drivers/gpu/drm/tiny/ili9225.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * DRM driver for Ilitek ILI9225 panels
4  *
5  * Copyright 2017 David Lechner <david@lechnology.com>
6  *
7  * Some code copied from mipi-dbi.c
8  * Copyright 2016 Noralf Trønnes
9  */
10 
11 #include <linux/delay.h>
12 #include <linux/dma-buf.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <linux/property.h>
16 #include <linux/spi/spi.h>
17 #include <video/mipi_display.h>
18 
19 #include <drm/drm_atomic_helper.h>
20 #include <drm/drm_damage_helper.h>
21 #include <drm/drm_drv.h>
22 #include <drm/drm_fb_dma_helper.h>
23 #include <drm/drm_fbdev_dma.h>
24 #include <drm/drm_fourcc.h>
25 #include <drm/drm_framebuffer.h>
26 #include <drm/drm_gem_atomic_helper.h>
27 #include <drm/drm_gem_dma_helper.h>
28 #include <drm/drm_gem_framebuffer_helper.h>
29 #include <drm/drm_managed.h>
30 #include <drm/drm_mipi_dbi.h>
31 #include <drm/drm_rect.h>
32 
33 #define ILI9225_DRIVER_READ_CODE	0x00
34 #define ILI9225_DRIVER_OUTPUT_CONTROL	0x01
35 #define ILI9225_LCD_AC_DRIVING_CONTROL	0x02
36 #define ILI9225_ENTRY_MODE		0x03
37 #define ILI9225_DISPLAY_CONTROL_1	0x07
38 #define ILI9225_BLANK_PERIOD_CONTROL_1	0x08
39 #define ILI9225_FRAME_CYCLE_CONTROL	0x0b
40 #define ILI9225_INTERFACE_CONTROL	0x0c
41 #define ILI9225_OSCILLATION_CONTROL	0x0f
42 #define ILI9225_POWER_CONTROL_1		0x10
43 #define ILI9225_POWER_CONTROL_2		0x11
44 #define ILI9225_POWER_CONTROL_3		0x12
45 #define ILI9225_POWER_CONTROL_4		0x13
46 #define ILI9225_POWER_CONTROL_5		0x14
47 #define ILI9225_VCI_RECYCLING		0x15
48 #define ILI9225_RAM_ADDRESS_SET_1	0x20
49 #define ILI9225_RAM_ADDRESS_SET_2	0x21
50 #define ILI9225_WRITE_DATA_TO_GRAM	0x22
51 #define ILI9225_SOFTWARE_RESET		0x28
52 #define ILI9225_GATE_SCAN_CONTROL	0x30
53 #define ILI9225_VERTICAL_SCROLL_1	0x31
54 #define ILI9225_VERTICAL_SCROLL_2	0x32
55 #define ILI9225_VERTICAL_SCROLL_3	0x33
56 #define ILI9225_PARTIAL_DRIVING_POS_1	0x34
57 #define ILI9225_PARTIAL_DRIVING_POS_2	0x35
58 #define ILI9225_HORIZ_WINDOW_ADDR_1	0x36
59 #define ILI9225_HORIZ_WINDOW_ADDR_2	0x37
60 #define ILI9225_VERT_WINDOW_ADDR_1	0x38
61 #define ILI9225_VERT_WINDOW_ADDR_2	0x39
62 #define ILI9225_GAMMA_CONTROL_1		0x50
63 #define ILI9225_GAMMA_CONTROL_2		0x51
64 #define ILI9225_GAMMA_CONTROL_3		0x52
65 #define ILI9225_GAMMA_CONTROL_4		0x53
66 #define ILI9225_GAMMA_CONTROL_5		0x54
67 #define ILI9225_GAMMA_CONTROL_6		0x55
68 #define ILI9225_GAMMA_CONTROL_7		0x56
69 #define ILI9225_GAMMA_CONTROL_8		0x57
70 #define ILI9225_GAMMA_CONTROL_9		0x58
71 #define ILI9225_GAMMA_CONTROL_10	0x59
72 
ili9225_command(struct mipi_dbi * dbi,u8 cmd,u16 data)73 static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data)
74 {
75 	u8 par[2] = { data >> 8, data & 0xff };
76 
77 	return mipi_dbi_command_buf(dbi, cmd, par, 2);
78 }
79 
ili9225_fb_dirty(struct iosys_map * src,struct drm_framebuffer * fb,struct drm_rect * rect,struct drm_format_conv_state * fmtcnv_state)80 static void ili9225_fb_dirty(struct iosys_map *src, struct drm_framebuffer *fb,
81 			     struct drm_rect *rect, struct drm_format_conv_state *fmtcnv_state)
82 {
83 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
84 	unsigned int height = rect->y2 - rect->y1;
85 	unsigned int width = rect->x2 - rect->x1;
86 	struct mipi_dbi *dbi = &dbidev->dbi;
87 	bool swap = dbi->swap_bytes;
88 	u16 x_start, y_start;
89 	u16 x1, x2, y1, y2;
90 	int ret = 0;
91 	bool full;
92 	void *tr;
93 
94 	full = width == fb->width && height == fb->height;
95 
96 	DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
97 
98 	if (!dbi->dc || !full || swap ||
99 	    fb->format->format == DRM_FORMAT_XRGB8888) {
100 		tr = dbidev->tx_buf;
101 		ret = mipi_dbi_buf_copy(tr, src, fb, rect, swap, fmtcnv_state);
102 		if (ret)
103 			goto err_msg;
104 	} else {
105 		tr = src->vaddr; /* TODO: Use mapping abstraction properly */
106 	}
107 
108 	switch (dbidev->rotation) {
109 	default:
110 		x1 = rect->x1;
111 		x2 = rect->x2 - 1;
112 		y1 = rect->y1;
113 		y2 = rect->y2 - 1;
114 		x_start = x1;
115 		y_start = y1;
116 		break;
117 	case 90:
118 		x1 = rect->y1;
119 		x2 = rect->y2 - 1;
120 		y1 = fb->width - rect->x2;
121 		y2 = fb->width - rect->x1 - 1;
122 		x_start = x1;
123 		y_start = y2;
124 		break;
125 	case 180:
126 		x1 = fb->width - rect->x2;
127 		x2 = fb->width - rect->x1 - 1;
128 		y1 = fb->height - rect->y2;
129 		y2 = fb->height - rect->y1 - 1;
130 		x_start = x2;
131 		y_start = y2;
132 		break;
133 	case 270:
134 		x1 = fb->height - rect->y2;
135 		x2 = fb->height - rect->y1 - 1;
136 		y1 = rect->x1;
137 		y2 = rect->x2 - 1;
138 		x_start = x2;
139 		y_start = y1;
140 		break;
141 	}
142 
143 	ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2);
144 	ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1);
145 	ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2);
146 	ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1);
147 
148 	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start);
149 	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start);
150 
151 	ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr,
152 				   width * height * 2);
153 err_msg:
154 	if (ret)
155 		dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
156 }
157 
ili9225_pipe_update(struct drm_simple_display_pipe * pipe,struct drm_plane_state * old_state)158 static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
159 				struct drm_plane_state *old_state)
160 {
161 	struct drm_plane_state *state = pipe->plane.state;
162 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
163 	struct drm_framebuffer *fb = state->fb;
164 	struct drm_rect rect;
165 	int idx;
166 
167 	if (!pipe->crtc.state->active)
168 		return;
169 
170 	if (!drm_dev_enter(fb->dev, &idx))
171 		return;
172 
173 	if (drm_atomic_helper_damage_merged(old_state, state, &rect))
174 		ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect,
175 				 &shadow_plane_state->fmtcnv_state);
176 
177 	drm_dev_exit(idx);
178 }
179 
ili9225_pipe_enable(struct drm_simple_display_pipe * pipe,struct drm_crtc_state * crtc_state,struct drm_plane_state * plane_state)180 static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
181 				struct drm_crtc_state *crtc_state,
182 				struct drm_plane_state *plane_state)
183 {
184 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
185 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
186 	struct drm_framebuffer *fb = plane_state->fb;
187 	struct device *dev = pipe->crtc.dev->dev;
188 	struct mipi_dbi *dbi = &dbidev->dbi;
189 	struct drm_rect rect = {
190 		.x1 = 0,
191 		.x2 = fb->width,
192 		.y1 = 0,
193 		.y2 = fb->height,
194 	};
195 	int ret, idx;
196 	u8 am_id;
197 
198 	if (!drm_dev_enter(pipe->crtc.dev, &idx))
199 		return;
200 
201 	DRM_DEBUG_KMS("\n");
202 
203 	mipi_dbi_hw_reset(dbi);
204 
205 	/*
206 	 * There don't seem to be two example init sequences that match, so
207 	 * using the one from the popular Arduino library for this display.
208 	 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp
209 	 */
210 
211 	ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000);
212 	if (ret) {
213 		DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
214 		goto out_exit;
215 	}
216 	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000);
217 	ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000);
218 	ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000);
219 	ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000);
220 
221 	msleep(40);
222 
223 	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018);
224 	ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121);
225 	ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f);
226 	ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f);
227 	ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800);
228 
229 	msleep(10);
230 
231 	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b);
232 
233 	msleep(50);
234 
235 	switch (dbidev->rotation) {
236 	default:
237 		am_id = 0x30;
238 		break;
239 	case 90:
240 		am_id = 0x18;
241 		break;
242 	case 180:
243 		am_id = 0x00;
244 		break;
245 	case 270:
246 		am_id = 0x28;
247 		break;
248 	}
249 	ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c);
250 	ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100);
251 	ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id);
252 	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
253 	ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808);
254 	ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100);
255 	ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000);
256 	ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01);
257 	ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020);
258 	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000);
259 	ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000);
260 
261 	ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000);
262 	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db);
263 	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000);
264 	ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000);
265 	ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db);
266 	ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000);
267 
268 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000);
269 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808);
270 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a);
271 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a);
272 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08);
273 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808);
274 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000);
275 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00);
276 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710);
277 	ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710);
278 
279 	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012);
280 
281 	msleep(50);
282 
283 	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017);
284 
285 	ili9225_fb_dirty(&shadow_plane_state->data[0], fb, &rect,
286 			 &shadow_plane_state->fmtcnv_state);
287 
288 out_exit:
289 	drm_dev_exit(idx);
290 }
291 
ili9225_pipe_disable(struct drm_simple_display_pipe * pipe)292 static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
293 {
294 	struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
295 	struct mipi_dbi *dbi = &dbidev->dbi;
296 
297 	DRM_DEBUG_KMS("\n");
298 
299 	/*
300 	 * This callback is not protected by drm_dev_enter/exit since we want to
301 	 * turn off the display on regular driver unload. It's highly unlikely
302 	 * that the underlying SPI controller is gone should this be called after
303 	 * unplug.
304 	 */
305 
306 	ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000);
307 	msleep(50);
308 	ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007);
309 	msleep(50);
310 	ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02);
311 }
312 
ili9225_dbi_command(struct mipi_dbi * dbi,u8 * cmd,u8 * par,size_t num)313 static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par,
314 			       size_t num)
315 {
316 	struct spi_device *spi = dbi->spi;
317 	unsigned int bpw = 8;
318 	u32 speed_hz;
319 	int ret;
320 
321 	spi_bus_lock(spi->controller);
322 	gpiod_set_value_cansleep(dbi->dc, 0);
323 	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1);
324 	ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1);
325 	spi_bus_unlock(spi->controller);
326 	if (ret || !num)
327 		return ret;
328 
329 	if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes)
330 		bpw = 16;
331 
332 	spi_bus_lock(spi->controller);
333 	gpiod_set_value_cansleep(dbi->dc, 1);
334 	speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
335 	ret = mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num);
336 	spi_bus_unlock(spi->controller);
337 
338 	return ret;
339 }
340 
341 static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = {
342 	.mode_valid	= mipi_dbi_pipe_mode_valid,
343 	.enable		= ili9225_pipe_enable,
344 	.disable	= ili9225_pipe_disable,
345 	.update		= ili9225_pipe_update,
346 	.begin_fb_access = mipi_dbi_pipe_begin_fb_access,
347 	.end_fb_access	= mipi_dbi_pipe_end_fb_access,
348 	.reset_plane	= mipi_dbi_pipe_reset_plane,
349 	.duplicate_plane_state = mipi_dbi_pipe_duplicate_plane_state,
350 	.destroy_plane_state = mipi_dbi_pipe_destroy_plane_state,
351 };
352 
353 static const struct drm_display_mode ili9225_mode = {
354 	DRM_SIMPLE_MODE(176, 220, 35, 44),
355 };
356 
357 DEFINE_DRM_GEM_DMA_FOPS(ili9225_fops);
358 
359 static const struct drm_driver ili9225_driver = {
360 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
361 	.fops			= &ili9225_fops,
362 	DRM_GEM_DMA_DRIVER_OPS_VMAP,
363 	.name			= "ili9225",
364 	.desc			= "Ilitek ILI9225",
365 	.date			= "20171106",
366 	.major			= 1,
367 	.minor			= 0,
368 };
369 
370 static const struct of_device_id ili9225_of_match[] = {
371 	{ .compatible = "vot,v220hf01a-t" },
372 	{},
373 };
374 MODULE_DEVICE_TABLE(of, ili9225_of_match);
375 
376 static const struct spi_device_id ili9225_id[] = {
377 	{ "v220hf01a-t", 0 },
378 	{ },
379 };
380 MODULE_DEVICE_TABLE(spi, ili9225_id);
381 
ili9225_probe(struct spi_device * spi)382 static int ili9225_probe(struct spi_device *spi)
383 {
384 	struct device *dev = &spi->dev;
385 	struct mipi_dbi_dev *dbidev;
386 	struct drm_device *drm;
387 	struct mipi_dbi *dbi;
388 	struct gpio_desc *rs;
389 	u32 rotation = 0;
390 	int ret;
391 
392 	dbidev = devm_drm_dev_alloc(dev, &ili9225_driver,
393 				    struct mipi_dbi_dev, drm);
394 	if (IS_ERR(dbidev))
395 		return PTR_ERR(dbidev);
396 
397 	dbi = &dbidev->dbi;
398 	drm = &dbidev->drm;
399 
400 	dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
401 	if (IS_ERR(dbi->reset))
402 		return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n");
403 
404 	rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW);
405 	if (IS_ERR(rs))
406 		return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n");
407 
408 	device_property_read_u32(dev, "rotation", &rotation);
409 
410 	ret = mipi_dbi_spi_init(spi, dbi, rs);
411 	if (ret)
412 		return ret;
413 
414 	/* override the command function set in  mipi_dbi_spi_init() */
415 	dbi->command = ili9225_dbi_command;
416 
417 	ret = mipi_dbi_dev_init(dbidev, &ili9225_pipe_funcs, &ili9225_mode, rotation);
418 	if (ret)
419 		return ret;
420 
421 	drm_mode_config_reset(drm);
422 
423 	ret = drm_dev_register(drm, 0);
424 	if (ret)
425 		return ret;
426 
427 	spi_set_drvdata(spi, drm);
428 
429 	drm_fbdev_dma_setup(drm, 0);
430 
431 	return 0;
432 }
433 
ili9225_remove(struct spi_device * spi)434 static void ili9225_remove(struct spi_device *spi)
435 {
436 	struct drm_device *drm = spi_get_drvdata(spi);
437 
438 	drm_dev_unplug(drm);
439 	drm_atomic_helper_shutdown(drm);
440 }
441 
ili9225_shutdown(struct spi_device * spi)442 static void ili9225_shutdown(struct spi_device *spi)
443 {
444 	drm_atomic_helper_shutdown(spi_get_drvdata(spi));
445 }
446 
447 static struct spi_driver ili9225_spi_driver = {
448 	.driver = {
449 		.name = "ili9225",
450 		.of_match_table = ili9225_of_match,
451 	},
452 	.id_table = ili9225_id,
453 	.probe = ili9225_probe,
454 	.remove = ili9225_remove,
455 	.shutdown = ili9225_shutdown,
456 };
457 module_spi_driver(ili9225_spi_driver);
458 
459 MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver");
460 MODULE_AUTHOR("David Lechner <david@lechnology.com>");
461 MODULE_LICENSE("GPL");
462