1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2007 - 2018 Intel Corporation. */
3
4 #include <linux/bitfield.h>
5 #include <linux/delay.h>
6 #include <linux/if_ether.h>
7 #include "e1000_mac.h"
8 #include "e1000_nvm.h"
9
10 /**
11 * igb_raise_eec_clk - Raise EEPROM clock
12 * @hw: pointer to the HW structure
13 * @eecd: pointer to the EEPROM
14 *
15 * Enable/Raise the EEPROM clock bit.
16 **/
igb_raise_eec_clk(struct e1000_hw * hw,u32 * eecd)17 static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
18 {
19 *eecd = *eecd | E1000_EECD_SK;
20 wr32(E1000_EECD, *eecd);
21 wrfl();
22 udelay(hw->nvm.delay_usec);
23 }
24
25 /**
26 * igb_lower_eec_clk - Lower EEPROM clock
27 * @hw: pointer to the HW structure
28 * @eecd: pointer to the EEPROM
29 *
30 * Clear/Lower the EEPROM clock bit.
31 **/
igb_lower_eec_clk(struct e1000_hw * hw,u32 * eecd)32 static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
33 {
34 *eecd = *eecd & ~E1000_EECD_SK;
35 wr32(E1000_EECD, *eecd);
36 wrfl();
37 udelay(hw->nvm.delay_usec);
38 }
39
40 /**
41 * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
42 * @hw: pointer to the HW structure
43 * @data: data to send to the EEPROM
44 * @count: number of bits to shift out
45 *
46 * We need to shift 'count' bits out to the EEPROM. So, the value in the
47 * "data" parameter will be shifted out to the EEPROM one bit at a time.
48 * In order to do this, "data" must be broken down into bits.
49 **/
igb_shift_out_eec_bits(struct e1000_hw * hw,u16 data,u16 count)50 static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
51 {
52 struct e1000_nvm_info *nvm = &hw->nvm;
53 u32 eecd = rd32(E1000_EECD);
54 u32 mask;
55
56 mask = 1u << (count - 1);
57 if (nvm->type == e1000_nvm_eeprom_spi)
58 eecd |= E1000_EECD_DO;
59
60 do {
61 eecd &= ~E1000_EECD_DI;
62
63 if (data & mask)
64 eecd |= E1000_EECD_DI;
65
66 wr32(E1000_EECD, eecd);
67 wrfl();
68
69 udelay(nvm->delay_usec);
70
71 igb_raise_eec_clk(hw, &eecd);
72 igb_lower_eec_clk(hw, &eecd);
73
74 mask >>= 1;
75 } while (mask);
76
77 eecd &= ~E1000_EECD_DI;
78 wr32(E1000_EECD, eecd);
79 }
80
81 /**
82 * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
83 * @hw: pointer to the HW structure
84 * @count: number of bits to shift in
85 *
86 * In order to read a register from the EEPROM, we need to shift 'count' bits
87 * in from the EEPROM. Bits are "shifted in" by raising the clock input to
88 * the EEPROM (setting the SK bit), and then reading the value of the data out
89 * "DO" bit. During this "shifting in" process the data in "DI" bit should
90 * always be clear.
91 **/
igb_shift_in_eec_bits(struct e1000_hw * hw,u16 count)92 static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
93 {
94 u32 eecd;
95 u32 i;
96 u16 data;
97
98 eecd = rd32(E1000_EECD);
99
100 eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
101 data = 0;
102
103 for (i = 0; i < count; i++) {
104 data <<= 1;
105 igb_raise_eec_clk(hw, &eecd);
106
107 eecd = rd32(E1000_EECD);
108
109 eecd &= ~E1000_EECD_DI;
110 if (eecd & E1000_EECD_DO)
111 data |= 1;
112
113 igb_lower_eec_clk(hw, &eecd);
114 }
115
116 return data;
117 }
118
119 /**
120 * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
121 * @hw: pointer to the HW structure
122 * @ee_reg: EEPROM flag for polling
123 *
124 * Polls the EEPROM status bit for either read or write completion based
125 * upon the value of 'ee_reg'.
126 **/
igb_poll_eerd_eewr_done(struct e1000_hw * hw,int ee_reg)127 static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
128 {
129 u32 attempts = 100000;
130 u32 i, reg = 0;
131 s32 ret_val = -E1000_ERR_NVM;
132
133 for (i = 0; i < attempts; i++) {
134 if (ee_reg == E1000_NVM_POLL_READ)
135 reg = rd32(E1000_EERD);
136 else
137 reg = rd32(E1000_EEWR);
138
139 if (reg & E1000_NVM_RW_REG_DONE) {
140 ret_val = 0;
141 break;
142 }
143
144 udelay(5);
145 }
146
147 return ret_val;
148 }
149
150 /**
151 * igb_acquire_nvm - Generic request for access to EEPROM
152 * @hw: pointer to the HW structure
153 *
154 * Set the EEPROM access request bit and wait for EEPROM access grant bit.
155 * Return successful if access grant bit set, else clear the request for
156 * EEPROM access and return -E1000_ERR_NVM (-1).
157 **/
igb_acquire_nvm(struct e1000_hw * hw)158 s32 igb_acquire_nvm(struct e1000_hw *hw)
159 {
160 u32 eecd = rd32(E1000_EECD);
161 s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
162 s32 ret_val = 0;
163
164
165 wr32(E1000_EECD, eecd | E1000_EECD_REQ);
166 eecd = rd32(E1000_EECD);
167
168 while (timeout) {
169 if (eecd & E1000_EECD_GNT)
170 break;
171 udelay(5);
172 eecd = rd32(E1000_EECD);
173 timeout--;
174 }
175
176 if (!timeout) {
177 eecd &= ~E1000_EECD_REQ;
178 wr32(E1000_EECD, eecd);
179 hw_dbg("Could not acquire NVM grant\n");
180 ret_val = -E1000_ERR_NVM;
181 }
182
183 return ret_val;
184 }
185
186 /**
187 * igb_standby_nvm - Return EEPROM to standby state
188 * @hw: pointer to the HW structure
189 *
190 * Return the EEPROM to a standby state.
191 **/
igb_standby_nvm(struct e1000_hw * hw)192 static void igb_standby_nvm(struct e1000_hw *hw)
193 {
194 struct e1000_nvm_info *nvm = &hw->nvm;
195 u32 eecd = rd32(E1000_EECD);
196
197 if (nvm->type == e1000_nvm_eeprom_spi) {
198 /* Toggle CS to flush commands */
199 eecd |= E1000_EECD_CS;
200 wr32(E1000_EECD, eecd);
201 wrfl();
202 udelay(nvm->delay_usec);
203 eecd &= ~E1000_EECD_CS;
204 wr32(E1000_EECD, eecd);
205 wrfl();
206 udelay(nvm->delay_usec);
207 }
208 }
209
210 /**
211 * e1000_stop_nvm - Terminate EEPROM command
212 * @hw: pointer to the HW structure
213 *
214 * Terminates the current command by inverting the EEPROM's chip select pin.
215 **/
e1000_stop_nvm(struct e1000_hw * hw)216 static void e1000_stop_nvm(struct e1000_hw *hw)
217 {
218 u32 eecd;
219
220 eecd = rd32(E1000_EECD);
221 if (hw->nvm.type == e1000_nvm_eeprom_spi) {
222 /* Pull CS high */
223 eecd |= E1000_EECD_CS;
224 igb_lower_eec_clk(hw, &eecd);
225 }
226 }
227
228 /**
229 * igb_release_nvm - Release exclusive access to EEPROM
230 * @hw: pointer to the HW structure
231 *
232 * Stop any current commands to the EEPROM and clear the EEPROM request bit.
233 **/
igb_release_nvm(struct e1000_hw * hw)234 void igb_release_nvm(struct e1000_hw *hw)
235 {
236 u32 eecd;
237
238 e1000_stop_nvm(hw);
239
240 eecd = rd32(E1000_EECD);
241 eecd &= ~E1000_EECD_REQ;
242 wr32(E1000_EECD, eecd);
243 }
244
245 /**
246 * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
247 * @hw: pointer to the HW structure
248 *
249 * Setups the EEPROM for reading and writing.
250 **/
igb_ready_nvm_eeprom(struct e1000_hw * hw)251 static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
252 {
253 struct e1000_nvm_info *nvm = &hw->nvm;
254 u32 eecd = rd32(E1000_EECD);
255 s32 ret_val = 0;
256 u16 timeout = 0;
257 u8 spi_stat_reg;
258
259
260 if (nvm->type == e1000_nvm_eeprom_spi) {
261 /* Clear SK and CS */
262 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
263 wr32(E1000_EECD, eecd);
264 wrfl();
265 udelay(1);
266 timeout = NVM_MAX_RETRY_SPI;
267
268 /* Read "Status Register" repeatedly until the LSB is cleared.
269 * The EEPROM will signal that the command has been completed
270 * by clearing bit 0 of the internal status register. If it's
271 * not cleared within 'timeout', then error out.
272 */
273 while (timeout) {
274 igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
275 hw->nvm.opcode_bits);
276 spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
277 if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
278 break;
279
280 udelay(5);
281 igb_standby_nvm(hw);
282 timeout--;
283 }
284
285 if (!timeout) {
286 hw_dbg("SPI NVM Status error\n");
287 ret_val = -E1000_ERR_NVM;
288 goto out;
289 }
290 }
291
292 out:
293 return ret_val;
294 }
295
296 /**
297 * igb_read_nvm_spi - Read EEPROM's using SPI
298 * @hw: pointer to the HW structure
299 * @offset: offset of word in the EEPROM to read
300 * @words: number of words to read
301 * @data: word read from the EEPROM
302 *
303 * Reads a 16 bit word from the EEPROM.
304 **/
igb_read_nvm_spi(struct e1000_hw * hw,u16 offset,u16 words,u16 * data)305 s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
306 {
307 struct e1000_nvm_info *nvm = &hw->nvm;
308 u32 i = 0;
309 s32 ret_val;
310 u16 word_in;
311 u8 read_opcode = NVM_READ_OPCODE_SPI;
312
313 /* A check for invalid values: offset too large, too many words,
314 * and not enough words.
315 */
316 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
317 (words == 0)) {
318 hw_dbg("nvm parameter(s) out of bounds\n");
319 ret_val = -E1000_ERR_NVM;
320 goto out;
321 }
322
323 ret_val = nvm->ops.acquire(hw);
324 if (ret_val)
325 goto out;
326
327 ret_val = igb_ready_nvm_eeprom(hw);
328 if (ret_val)
329 goto release;
330
331 igb_standby_nvm(hw);
332
333 if ((nvm->address_bits == 8) && (offset >= 128))
334 read_opcode |= NVM_A8_OPCODE_SPI;
335
336 /* Send the READ command (opcode + addr) */
337 igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
338 igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
339
340 /* Read the data. SPI NVMs increment the address with each byte
341 * read and will roll over if reading beyond the end. This allows
342 * us to read the whole NVM from any offset
343 */
344 for (i = 0; i < words; i++) {
345 word_in = igb_shift_in_eec_bits(hw, 16);
346 data[i] = (word_in >> 8) | (word_in << 8);
347 }
348
349 release:
350 nvm->ops.release(hw);
351
352 out:
353 return ret_val;
354 }
355
356 /**
357 * igb_read_nvm_eerd - Reads EEPROM using EERD register
358 * @hw: pointer to the HW structure
359 * @offset: offset of word in the EEPROM to read
360 * @words: number of words to read
361 * @data: word read from the EEPROM
362 *
363 * Reads a 16 bit word from the EEPROM using the EERD register.
364 **/
igb_read_nvm_eerd(struct e1000_hw * hw,u16 offset,u16 words,u16 * data)365 s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
366 {
367 struct e1000_nvm_info *nvm = &hw->nvm;
368 u32 i, eerd = 0;
369 s32 ret_val = 0;
370
371 /* A check for invalid values: offset too large, too many words,
372 * and not enough words.
373 */
374 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
375 (words == 0)) {
376 hw_dbg("nvm parameter(s) out of bounds\n");
377 ret_val = -E1000_ERR_NVM;
378 goto out;
379 }
380
381 for (i = 0; i < words; i++) {
382 eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
383 E1000_NVM_RW_REG_START;
384
385 wr32(E1000_EERD, eerd);
386 ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
387 if (ret_val)
388 break;
389
390 data[i] = (rd32(E1000_EERD) >>
391 E1000_NVM_RW_REG_DATA);
392 }
393
394 out:
395 return ret_val;
396 }
397
398 /**
399 * igb_write_nvm_spi - Write to EEPROM using SPI
400 * @hw: pointer to the HW structure
401 * @offset: offset within the EEPROM to be written to
402 * @words: number of words to write
403 * @data: 16 bit word(s) to be written to the EEPROM
404 *
405 * Writes data to EEPROM at offset using SPI interface.
406 *
407 * If e1000_update_nvm_checksum is not called after this function , the
408 * EEPROM will most likley contain an invalid checksum.
409 **/
igb_write_nvm_spi(struct e1000_hw * hw,u16 offset,u16 words,u16 * data)410 s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
411 {
412 struct e1000_nvm_info *nvm = &hw->nvm;
413 s32 ret_val = -E1000_ERR_NVM;
414 u16 widx = 0;
415
416 /* A check for invalid values: offset too large, too many words,
417 * and not enough words.
418 */
419 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
420 (words == 0)) {
421 hw_dbg("nvm parameter(s) out of bounds\n");
422 return ret_val;
423 }
424
425 while (widx < words) {
426 u8 write_opcode = NVM_WRITE_OPCODE_SPI;
427
428 ret_val = nvm->ops.acquire(hw);
429 if (ret_val)
430 return ret_val;
431
432 ret_val = igb_ready_nvm_eeprom(hw);
433 if (ret_val) {
434 nvm->ops.release(hw);
435 return ret_val;
436 }
437
438 igb_standby_nvm(hw);
439
440 /* Send the WRITE ENABLE command (8 bit opcode) */
441 igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
442 nvm->opcode_bits);
443
444 igb_standby_nvm(hw);
445
446 /* Some SPI eeproms use the 8th address bit embedded in the
447 * opcode
448 */
449 if ((nvm->address_bits == 8) && (offset >= 128))
450 write_opcode |= NVM_A8_OPCODE_SPI;
451
452 /* Send the Write command (8-bit opcode + addr) */
453 igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
454 igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
455 nvm->address_bits);
456
457 /* Loop to allow for up to whole page write of eeprom */
458 while (widx < words) {
459 u16 word_out = data[widx];
460
461 word_out = (word_out >> 8) | (word_out << 8);
462 igb_shift_out_eec_bits(hw, word_out, 16);
463 widx++;
464
465 if ((((offset + widx) * 2) % nvm->page_size) == 0) {
466 igb_standby_nvm(hw);
467 break;
468 }
469 }
470 usleep_range(1000, 2000);
471 nvm->ops.release(hw);
472 }
473
474 return ret_val;
475 }
476
477 /**
478 * igb_read_part_string - Read device part number
479 * @hw: pointer to the HW structure
480 * @part_num: pointer to device part number
481 * @part_num_size: size of part number buffer
482 *
483 * Reads the product board assembly (PBA) number from the EEPROM and stores
484 * the value in part_num.
485 **/
igb_read_part_string(struct e1000_hw * hw,u8 * part_num,u32 part_num_size)486 s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
487 {
488 s32 ret_val;
489 u16 nvm_data;
490 u16 pointer;
491 u16 offset;
492 u16 length;
493
494 if (part_num == NULL) {
495 hw_dbg("PBA string buffer was null\n");
496 ret_val = E1000_ERR_INVALID_ARGUMENT;
497 goto out;
498 }
499
500 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
501 if (ret_val) {
502 hw_dbg("NVM Read Error\n");
503 goto out;
504 }
505
506 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
507 if (ret_val) {
508 hw_dbg("NVM Read Error\n");
509 goto out;
510 }
511
512 /* if nvm_data is not ptr guard the PBA must be in legacy format which
513 * means pointer is actually our second data word for the PBA number
514 * and we can decode it into an ascii string
515 */
516 if (nvm_data != NVM_PBA_PTR_GUARD) {
517 hw_dbg("NVM PBA number is not stored as string\n");
518
519 /* we will need 11 characters to store the PBA */
520 if (part_num_size < 11) {
521 hw_dbg("PBA string buffer too small\n");
522 return E1000_ERR_NO_SPACE;
523 }
524
525 /* extract hex string from data and pointer */
526 part_num[0] = (nvm_data >> 12) & 0xF;
527 part_num[1] = (nvm_data >> 8) & 0xF;
528 part_num[2] = (nvm_data >> 4) & 0xF;
529 part_num[3] = nvm_data & 0xF;
530 part_num[4] = (pointer >> 12) & 0xF;
531 part_num[5] = (pointer >> 8) & 0xF;
532 part_num[6] = '-';
533 part_num[7] = 0;
534 part_num[8] = (pointer >> 4) & 0xF;
535 part_num[9] = pointer & 0xF;
536
537 /* put a null character on the end of our string */
538 part_num[10] = '\0';
539
540 /* switch all the data but the '-' to hex char */
541 for (offset = 0; offset < 10; offset++) {
542 if (part_num[offset] < 0xA)
543 part_num[offset] += '0';
544 else if (part_num[offset] < 0x10)
545 part_num[offset] += 'A' - 0xA;
546 }
547
548 goto out;
549 }
550
551 ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
552 if (ret_val) {
553 hw_dbg("NVM Read Error\n");
554 goto out;
555 }
556
557 if (length == 0xFFFF || length == 0) {
558 hw_dbg("NVM PBA number section invalid length\n");
559 ret_val = E1000_ERR_NVM_PBA_SECTION;
560 goto out;
561 }
562 /* check if part_num buffer is big enough */
563 if (part_num_size < (((u32)length * 2) - 1)) {
564 hw_dbg("PBA string buffer too small\n");
565 ret_val = E1000_ERR_NO_SPACE;
566 goto out;
567 }
568
569 /* trim pba length from start of string */
570 pointer++;
571 length--;
572
573 for (offset = 0; offset < length; offset++) {
574 ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
575 if (ret_val) {
576 hw_dbg("NVM Read Error\n");
577 goto out;
578 }
579 part_num[offset * 2] = (u8)(nvm_data >> 8);
580 part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
581 }
582 part_num[offset * 2] = '\0';
583
584 out:
585 return ret_val;
586 }
587
588 /**
589 * igb_read_mac_addr - Read device MAC address
590 * @hw: pointer to the HW structure
591 *
592 * Reads the device MAC address from the EEPROM and stores the value.
593 * Since devices with two ports use the same EEPROM, we increment the
594 * last bit in the MAC address for the second port.
595 **/
igb_read_mac_addr(struct e1000_hw * hw)596 s32 igb_read_mac_addr(struct e1000_hw *hw)
597 {
598 u32 rar_high;
599 u32 rar_low;
600 u16 i;
601
602 rar_high = rd32(E1000_RAH(0));
603 rar_low = rd32(E1000_RAL(0));
604
605 for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
606 hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
607
608 for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
609 hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
610
611 for (i = 0; i < ETH_ALEN; i++)
612 hw->mac.addr[i] = hw->mac.perm_addr[i];
613
614 return 0;
615 }
616
617 /**
618 * igb_validate_nvm_checksum - Validate EEPROM checksum
619 * @hw: pointer to the HW structure
620 *
621 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
622 * and then verifies that the sum of the EEPROM is equal to 0xBABA.
623 **/
igb_validate_nvm_checksum(struct e1000_hw * hw)624 s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
625 {
626 s32 ret_val = 0;
627 u16 checksum = 0;
628 u16 i, nvm_data;
629
630 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
631 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
632 if (ret_val) {
633 hw_dbg("NVM Read Error\n");
634 goto out;
635 }
636 checksum += nvm_data;
637 }
638
639 if (checksum != (u16) NVM_SUM) {
640 hw_dbg("NVM Checksum Invalid\n");
641 ret_val = -E1000_ERR_NVM;
642 goto out;
643 }
644
645 out:
646 return ret_val;
647 }
648
649 /**
650 * igb_update_nvm_checksum - Update EEPROM checksum
651 * @hw: pointer to the HW structure
652 *
653 * Updates the EEPROM checksum by reading/adding each word of the EEPROM
654 * up to the checksum. Then calculates the EEPROM checksum and writes the
655 * value to the EEPROM.
656 **/
igb_update_nvm_checksum(struct e1000_hw * hw)657 s32 igb_update_nvm_checksum(struct e1000_hw *hw)
658 {
659 s32 ret_val;
660 u16 checksum = 0;
661 u16 i, nvm_data;
662
663 for (i = 0; i < NVM_CHECKSUM_REG; i++) {
664 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
665 if (ret_val) {
666 hw_dbg("NVM Read Error while updating checksum.\n");
667 goto out;
668 }
669 checksum += nvm_data;
670 }
671 checksum = (u16) NVM_SUM - checksum;
672 ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
673 if (ret_val)
674 hw_dbg("NVM Write Error while updating checksum.\n");
675
676 out:
677 return ret_val;
678 }
679
680 /**
681 * igb_get_fw_version - Get firmware version information
682 * @hw: pointer to the HW structure
683 * @fw_vers: pointer to output structure
684 *
685 * unsupported MAC types will return all 0 version structure
686 **/
igb_get_fw_version(struct e1000_hw * hw,struct e1000_fw_version * fw_vers)687 void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
688 {
689 u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
690 u8 q, hval, rem, result;
691 u16 comb_verh, comb_verl, comb_offset;
692
693 memset(fw_vers, 0, sizeof(struct e1000_fw_version));
694
695 /* basic eeprom version numbers and bits used vary by part and by tool
696 * used to create the nvm images. Check which data format we have.
697 */
698 hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
699 switch (hw->mac.type) {
700 case e1000_i211:
701 igb_read_invm_version(hw, fw_vers);
702 return;
703 case e1000_82575:
704 case e1000_82576:
705 case e1000_82580:
706 /* Use this format, unless EETRACK ID exists,
707 * then use alternate format
708 */
709 if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
710 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
711 fw_vers->eep_major = FIELD_GET(NVM_MAJOR_MASK,
712 fw_version);
713 fw_vers->eep_minor = FIELD_GET(NVM_MINOR_MASK,
714 fw_version);
715 fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
716 goto etrack_id;
717 }
718 break;
719 case e1000_i210:
720 if (!(igb_get_flash_presence_i210(hw))) {
721 igb_read_invm_version(hw, fw_vers);
722 return;
723 }
724 fallthrough;
725 case e1000_i350:
726 /* find combo image version */
727 hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
728 if ((comb_offset != 0x0) &&
729 (comb_offset != NVM_VER_INVALID)) {
730
731 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
732 + 1), 1, &comb_verh);
733 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
734 1, &comb_verl);
735
736 /* get Option Rom version if it exists and is valid */
737 if ((comb_verh && comb_verl) &&
738 ((comb_verh != NVM_VER_INVALID) &&
739 (comb_verl != NVM_VER_INVALID))) {
740
741 fw_vers->or_valid = true;
742 fw_vers->or_major =
743 comb_verl >> NVM_COMB_VER_SHFT;
744 fw_vers->or_build =
745 (comb_verl << NVM_COMB_VER_SHFT)
746 | (comb_verh >> NVM_COMB_VER_SHFT);
747 fw_vers->or_patch =
748 comb_verh & NVM_COMB_VER_MASK;
749 }
750 }
751 break;
752 default:
753 return;
754 }
755 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
756 fw_vers->eep_major = FIELD_GET(NVM_MAJOR_MASK, fw_version);
757
758 /* check for old style version format in newer images*/
759 if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
760 eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
761 } else {
762 eeprom_verl = FIELD_GET(NVM_MINOR_MASK, fw_version);
763 }
764 /* Convert minor value to hex before assigning to output struct
765 * Val to be converted will not be higher than 99, per tool output
766 */
767 q = eeprom_verl / NVM_HEX_CONV;
768 hval = q * NVM_HEX_TENS;
769 rem = eeprom_verl % NVM_HEX_CONV;
770 result = hval + rem;
771 fw_vers->eep_minor = result;
772
773 etrack_id:
774 if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
775 hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
776 hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
777 fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
778 | eeprom_verl;
779 }
780 }
781