xref: /titanic_51/usr/src/uts/intel/io/dktp/hba/ghd/ghd.c (revision 14e0668fa5c67fe3c44f2abd39f29a6f18272f11)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */


#include <sys/types.h>
#include <sys/kmem.h>
#include <sys/debug.h>
#include <sys/scsi/scsi.h>

#include "ghd.h"

/* ghd_poll() function codes: */
typedef enum {
	GHD_POLL_REQUEST,	/* wait for a specific request */
	GHD_POLL_DEVICE,	/* wait for a specific device to idle */
	GHD_POLL_ALL		/* wait for the whole bus to idle */
} gpoll_t;

/*
 * Local functions:
 */
static	gcmd_t	*ghd_doneq_get(ccc_t *cccp);
static	void	 ghd_doneq_pollmode_enter(ccc_t *cccp);
static	void	 ghd_doneq_pollmode_exit(ccc_t *cccp);
static	uint_t	 ghd_doneq_process(caddr_t arg);
static	void	 ghd_do_reset_notify_callbacks(ccc_t *cccp);

static	int	 ghd_poll(ccc_t *cccp, gpoll_t polltype, ulong_t polltime,
			gcmd_t *poll_gcmdp, gtgt_t *gtgtp, void *intr_status);


/*
 * Local configuration variables
 */
#define	DEFAULT_GHD_TIMEOUT    50000	/* Amount of time to poll(50ms) */

ulong_t	ghd_tran_abort_timeout = DEFAULT_GHD_TIMEOUT;
ulong_t	ghd_tran_abort_lun_timeout = DEFAULT_GHD_TIMEOUT;
ulong_t	ghd_tran_reset_target_timeout = DEFAULT_GHD_TIMEOUT;
ulong_t	ghd_tran_reset_bus_timeout = DEFAULT_GHD_TIMEOUT;

static int
ghd_doneq_init(ccc_t *cccp)
{
	ddi_iblock_cookie_t iblock;

	L2_INIT(&cccp->ccc_doneq);
	cccp->ccc_hba_pollmode = TRUE;

	if (ddi_add_softintr(cccp->ccc_hba_dip, DDI_SOFTINT_LOW,
	    &cccp->ccc_doneq_softid, &iblock, NULL,
	    ghd_doneq_process, (caddr_t)cccp) != DDI_SUCCESS) {
		GDBG_ERROR(("ghd_doneq_init: add softintr failed cccp 0x%p\n",
		    (void *)cccp));
		return (FALSE);
	}

	mutex_init(&cccp->ccc_doneq_mutex, NULL, MUTEX_DRIVER, iblock);
	ghd_doneq_pollmode_exit(cccp);
	return (TRUE);
}

/*
 * ghd_complete():
 *
 *	The HBA driver calls this entry point when it's completely
 *	done processing a request.
 *
 *	See the GHD_COMPLETE_INLINE() macro in ghd.h for the actual code.
 */

void
ghd_complete(ccc_t *cccp, gcmd_t *gcmdp)
{
	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));
	GHD_COMPLETE_INLINE(cccp, gcmdp);
}


/*
 * ghd_doneq_put_head():
 *
 *	Mark the request done and prepend it to the doneq.
 *	See the GHD_DONEQ_PUT_HEAD_INLINE() macros in ghd.h for
 *	the actual code.
 */
void
ghd_doneq_put_head(ccc_t *cccp, gcmd_t *gcmdp)
{
	GHD_DONEQ_PUT_HEAD_INLINE(cccp, gcmdp)
}

/*
 * ghd_doneq_put_tail():
 *
 *	Mark the request done and append it to the doneq.
 *	See the GHD_DONEQ_PUT_TAIL_INLINE() macros in ghd.h for
 *	the actual code.
 */
void
ghd_doneq_put_tail(ccc_t *cccp, gcmd_t *gcmdp)
{
	GHD_DONEQ_PUT_TAIL_INLINE(cccp, gcmdp)
}

static gcmd_t	*
ghd_doneq_get(ccc_t *cccp)
{
	kmutex_t *doneq_mutexp = &cccp->ccc_doneq_mutex;
	gcmd_t	 *gcmdp;

	mutex_enter(doneq_mutexp);
	if ((gcmdp = L2_next(&cccp->ccc_doneq)) != NULL)
		L2_delete(&gcmdp->cmd_q);
	mutex_exit(doneq_mutexp);
	return (gcmdp);
}


static void
ghd_doneq_pollmode_enter(ccc_t *cccp)
{
	kmutex_t *doneq_mutexp = &cccp->ccc_doneq_mutex;

	mutex_enter(doneq_mutexp);
	cccp->ccc_hba_pollmode = TRUE;
	mutex_exit(doneq_mutexp);
}


static void
ghd_doneq_pollmode_exit(ccc_t *cccp)
{
	kmutex_t *doneq_mutexp = &cccp->ccc_doneq_mutex;

	mutex_enter(doneq_mutexp);
	cccp->ccc_hba_pollmode = FALSE;
	mutex_exit(doneq_mutexp);

	/* trigger software interrupt for the completion callbacks */
	if (!L2_EMPTY(&cccp->ccc_doneq)) {
		/*
		 * If we are panicking we should just call the completion
		 * function directly as we can not use soft interrupts
		 * or timeouts during panic.
		 */
		if (!ddi_in_panic())
			ddi_trigger_softintr(cccp->ccc_doneq_softid);
		else
			(void) ghd_doneq_process((caddr_t)cccp);
	}
}


/* ***************************************************************** */

/*
 *
 * ghd_doneq_process()
 *
 *	This function is called directly from the software interrupt
 *	handler.
 *
 *	The doneq is protected by a separate mutex than the
 *	HBA mutex in order to avoid mutex contention on MP systems.
 *
 */

static uint_t
ghd_doneq_process(caddr_t arg)
{
	ccc_t *cccp =	(ccc_t *)arg;
	kmutex_t	*doneq_mutexp;
	gcmd_t		*gcmdp;
	int			rc = DDI_INTR_UNCLAIMED;

	doneq_mutexp = &cccp->ccc_doneq_mutex;

	for (;;) {
		mutex_enter(doneq_mutexp);
		/* skip if FLAG_NOINTR request in progress */
		if (cccp->ccc_hba_pollmode)
			break;
		/* pop the first one from the done Q */
		if ((gcmdp = L2_next(&cccp->ccc_doneq)) == NULL)
			break;
		L2_delete(&gcmdp->cmd_q);

		if (gcmdp->cmd_flags & GCMDFLG_RESET_NOTIFY) {
			/* special request; processed here and discarded */
			ghd_do_reset_notify_callbacks(cccp);
			ghd_gcmd_free(gcmdp);
			mutex_exit(doneq_mutexp);
			continue;
		}

		/*
		 * drop the mutex since completion
		 * function can re-enter the top half via
		 * ghd_transport()
		 */
		mutex_exit(doneq_mutexp);
		gcmdp->cmd_state = GCMD_STATE_IDLE;
		(*cccp->ccc_hba_complete)(cccp->ccc_hba_handle, gcmdp, TRUE);
#ifdef notyet
		/* I don't think this is ever necessary */
		rc = DDI_INTR_CLAIMED;
#endif
	}
	mutex_exit(doneq_mutexp);
	return (rc);
}

static void
ghd_do_reset_notify_callbacks(ccc_t *cccp)
{
	ghd_reset_notify_list_t *rnp;
	L2el_t *rnl = &cccp->ccc_reset_notify_list;

	ASSERT(mutex_owned(&cccp->ccc_doneq_mutex));

	/* lock the reset notify list while we operate on it */
	mutex_enter(&cccp->ccc_reset_notify_mutex);

	for (rnp = (ghd_reset_notify_list_t *)L2_next(rnl);
	    rnp != NULL;
	    rnp = (ghd_reset_notify_list_t *)L2_next(&rnp->l2_link)) {

		/* don't call if HBA driver didn't set it */
		if (cccp->ccc_hba_reset_notify_callback) {
			(*cccp->ccc_hba_reset_notify_callback)(rnp->gtgtp,
			    rnp->callback, rnp->arg);
		}
	}
	mutex_exit(&cccp->ccc_reset_notify_mutex);
}


/* ***************************************************************** */


/*
 * ghd_register()
 *
 *	Do the usual interrupt handler setup stuff.
 *
 *	Also, set up three mutexes: the wait queue mutex, the HBA
 *	mutex, and the done queue mutex. The permitted locking
 *	orders are:
 *
 *		1. enter(waitq)
 *		2. enter(activel)
 *		3. enter(doneq)
 *		4. enter(HBA) then enter(activel)
 *		5. enter(HBA) then enter(doneq)
 *		6. enter(HBA) then enter(waitq)
 *		7. enter(waitq) then tryenter(HBA)
 *
 *	Note: cases 6 and 7 won't deadlock because case 7 is always
 *	mutex_tryenter() call.
 *
 */


int
ghd_register(char *labelp,
	ccc_t	*cccp,
	dev_info_t *dip,
	int	inumber,
	void	*hba_handle,
	int	(*ccballoc)(gtgt_t *, gcmd_t *, int, int, int, int),
	void	(*ccbfree)(gcmd_t *),
	void	(*sg_func)(gcmd_t *, ddi_dma_cookie_t *, int, int),
	int	(*hba_start)(void *, gcmd_t *),
	void    (*hba_complete)(void *, gcmd_t *, int),
	uint_t	(*int_handler)(caddr_t),
	int	(*get_status)(void *, void *),
	void	(*process_intr)(void *, void *),
	int	(*timeout_func)(void *, gcmd_t *, gtgt_t *, gact_t, int),
	tmr_t	*tmrp,
	void 	(*hba_reset_notify_callback)(gtgt_t *,
			void (*)(caddr_t), caddr_t))
{

	cccp->ccc_label = labelp;
	cccp->ccc_hba_dip = dip;
	cccp->ccc_ccballoc = ccballoc;
	cccp->ccc_ccbfree = ccbfree;
	cccp->ccc_sg_func = sg_func;
	cccp->ccc_hba_start = hba_start;
	cccp->ccc_hba_complete = hba_complete;
	cccp->ccc_process_intr = process_intr;
	cccp->ccc_get_status = get_status;
	cccp->ccc_hba_handle = hba_handle;
	cccp->ccc_hba_reset_notify_callback = hba_reset_notify_callback;

	/* initialize the HBA's list headers */
	CCCP_INIT(cccp);

	if (ddi_get_iblock_cookie(dip, inumber, &cccp->ccc_iblock)
	    != DDI_SUCCESS) {

		return (FALSE);
	}

	mutex_init(&cccp->ccc_hba_mutex, NULL, MUTEX_DRIVER, cccp->ccc_iblock);

	mutex_init(&cccp->ccc_waitq_mutex, NULL, MUTEX_DRIVER,
	    cccp->ccc_iblock);

	mutex_init(&cccp->ccc_reset_notify_mutex, NULL, MUTEX_DRIVER,
	    cccp->ccc_iblock);

	/* Establish interrupt handler */
	if (ddi_add_intr(dip, inumber, &cccp->ccc_iblock, NULL,
	    int_handler, (caddr_t)hba_handle) != DDI_SUCCESS) {
		mutex_destroy(&cccp->ccc_hba_mutex);
		mutex_destroy(&cccp->ccc_waitq_mutex);
		mutex_destroy(&cccp->ccc_reset_notify_mutex);

		return (FALSE);
	}

	if (ghd_timer_attach(cccp, tmrp, timeout_func) == FALSE) {
		ddi_remove_intr(cccp->ccc_hba_dip, 0, cccp->ccc_iblock);
		mutex_destroy(&cccp->ccc_hba_mutex);
		mutex_destroy(&cccp->ccc_waitq_mutex);
		mutex_destroy(&cccp->ccc_reset_notify_mutex);

		return (FALSE);
	}

	if (ghd_doneq_init(cccp)) {

		return (TRUE);
	}

	/*
	 * ghd_doneq_init() returned error:
	 */

	ghd_timer_detach(cccp);
	ddi_remove_intr(cccp->ccc_hba_dip, 0, cccp->ccc_iblock);
	mutex_destroy(&cccp->ccc_hba_mutex);
	mutex_destroy(&cccp->ccc_waitq_mutex);
	mutex_destroy(&cccp->ccc_reset_notify_mutex);

	return (FALSE);

}


void
ghd_unregister(ccc_t *cccp)
{
	ghd_timer_detach(cccp);
	ddi_remove_intr(cccp->ccc_hba_dip, 0, cccp->ccc_iblock);
	ddi_remove_softintr(cccp->ccc_doneq_softid);
	mutex_destroy(&cccp->ccc_hba_mutex);
	mutex_destroy(&cccp->ccc_waitq_mutex);
	mutex_destroy(&cccp->ccc_doneq_mutex);
}



int
ghd_intr(ccc_t *cccp, void *intr_status)
{
	int (*statfunc)(void *, void *) = cccp->ccc_get_status;
	void (*processfunc)(void *, void *) = cccp->ccc_process_intr;
	kmutex_t *waitq_mutexp = &cccp->ccc_waitq_mutex;
	kmutex_t *hba_mutexp = &cccp->ccc_hba_mutex;
	void		  *handle = cccp->ccc_hba_handle;
	int		   rc = DDI_INTR_UNCLAIMED;
	int		   more;


	mutex_enter(hba_mutexp);

	GDBG_INTR(("ghd_intr(): cccp=0x%p status=0x%p\n",
	    (void *)cccp, intr_status));

	for (;;) {
		more = FALSE;

		/* process the interrupt status */
		while ((*statfunc)(handle, intr_status)) {
			(*processfunc)(handle, intr_status);
			rc = DDI_INTR_CLAIMED;
			more = TRUE;
		}
		mutex_enter(waitq_mutexp);
		if (ghd_waitq_process_and_mutex_hold(cccp)) {
			ASSERT(mutex_owned(hba_mutexp));
			mutex_exit(waitq_mutexp);
			continue;
		}
		if (more) {
			mutex_exit(waitq_mutexp);
			continue;
		}
		GDBG_INTR(("ghd_intr(): done cccp=0x%p status=0x%p rc %d\n",
		    (void *)cccp, intr_status, rc));
		/*
		 * Release the mutexes in the opposite order that they
		 * were acquired to prevent requests queued by
		 * ghd_transport() from getting hung up in the wait queue.
		 */
		mutex_exit(hba_mutexp);
		mutex_exit(waitq_mutexp);
		return (rc);
	}
}

static int
ghd_poll(ccc_t	*cccp,
	gpoll_t	 polltype,
	ulong_t	 polltime,
	gcmd_t	*poll_gcmdp,
	gtgt_t	*gtgtp,
	void	*intr_status)
{
	gcmd_t	*gcmdp;
	L2el_t	 gcmd_hold_queue;
	int	 got_it = FALSE;
	clock_t  poll_lbolt;
	clock_t	 start_lbolt;
	clock_t	 current_lbolt;


	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));
	L2_INIT(&gcmd_hold_queue);

	/* Que hora es? */
	poll_lbolt = drv_usectohz((clock_t)polltime);
	start_lbolt = ddi_get_lbolt();

	/* unqueue and save all CMD/CCBs until I find the right one */
	while (!got_it) {

		/* Give up yet? */
		current_lbolt = ddi_get_lbolt();
		if (poll_lbolt && (current_lbolt - start_lbolt >= poll_lbolt))
			break;

		/*
		 * delay 1 msec each time around the loop (this is an
		 * arbitrary delay value, any value should work) except
		 * zero because some devices don't like being polled too
		 * fast and it saturates the bus on an MP system.
		 */
		drv_usecwait(1000);

		/*
		 * check for any new device status
		 */
		if ((*cccp->ccc_get_status)(cccp->ccc_hba_handle, intr_status))
			(*cccp->ccc_process_intr)(cccp->ccc_hba_handle,
			    intr_status);

		/*
		 * If something completed then try to start the
		 * next request from the wait queue. Don't release
		 * the HBA mutex because I don't know whether my
		 * request(s) is/are on the done queue yet.
		 */
		mutex_enter(&cccp->ccc_waitq_mutex);
		(void) ghd_waitq_process_and_mutex_hold(cccp);
		mutex_exit(&cccp->ccc_waitq_mutex);

		/*
		 * Process the first of any timed-out requests.
		 */
		ghd_timer_poll(cccp, GHD_TIMER_POLL_ONE);

		/*
		 * Unqueue all the completed requests, look for mine
		 */
		while (gcmdp = ghd_doneq_get(cccp)) {
			/*
			 * If we got one and it's my request, then
			 * we're done.
			 */
			if (gcmdp == poll_gcmdp) {
				poll_gcmdp->cmd_state = GCMD_STATE_IDLE;
				got_it = TRUE;
				continue;
			}
			/* fifo queue the other cmds on my local list */
			L2_add(&gcmd_hold_queue, &gcmdp->cmd_q, gcmdp);
		}


		/*
		 * Check whether we're done yet.
		 */
		switch (polltype) {
		case GHD_POLL_DEVICE:
			/*
			 * wait for everything queued on a specific device
			 */
			if (GDEV_NACTIVE(gtgtp->gt_gdevp) == 0)
				got_it = TRUE;
			break;

		case GHD_POLL_ALL:
			/*
			 * if waiting for all outstanding requests and
			 * if active list is now empty then exit
			 */
			if (GHBA_NACTIVE(cccp) == 0)
				got_it = TRUE;
			break;

		case GHD_POLL_REQUEST:
			break;

		}
	}

	if (L2_EMPTY(&gcmd_hold_queue)) {
		ASSERT(!mutex_owned(&cccp->ccc_waitq_mutex));
		ASSERT(mutex_owned(&cccp->ccc_hba_mutex));
		return (got_it);
	}

	/*
	 * copy the local gcmd_hold_queue back to the doneq so
	 * that the order of completion callbacks is preserved
	 */
	while (gcmdp = L2_next(&gcmd_hold_queue)) {
		L2_delete(&gcmdp->cmd_q);
		GHD_DONEQ_PUT_TAIL(cccp, gcmdp);
	}

	ASSERT(!mutex_owned(&cccp->ccc_waitq_mutex));
	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));
	return (got_it);
}


/*
 * ghd_tran_abort()
 *
 *	Abort specific command on a target.
 *
 */

int
ghd_tran_abort(ccc_t *cccp, gcmd_t *gcmdp, gtgt_t *gtgtp, void *intr_status)
{
	gact_t	 action;
	int	 rc;

	/*
	 * call the driver's abort_cmd function
	 */

	mutex_enter(&cccp->ccc_hba_mutex);
	ghd_doneq_pollmode_enter(cccp);

	switch (gcmdp->cmd_state) {
	case GCMD_STATE_WAITQ:
		/* not yet started */
		action = GACTION_EARLY_ABORT;
		break;

	case GCMD_STATE_ACTIVE:
		/* in progress */
		action = GACTION_ABORT_CMD;
		break;

	default:
		/* everything else, probably already being aborted */
		rc = FALSE;
		goto exit;
	}

	/* stop the timer and remove it from the active list */
	GHD_TIMER_STOP(cccp, gcmdp);

	/* start a new timer and send out the abort command */
	ghd_timer_newstate(cccp, gcmdp, gtgtp, action, GHD_TGTREQ);

	/* wait for the abort to complete */
	if (rc = ghd_poll(cccp, GHD_POLL_REQUEST, ghd_tran_abort_timeout,
	    gcmdp, gtgtp, intr_status)) {
		gcmdp->cmd_state = GCMD_STATE_DONEQ;
		GHD_DONEQ_PUT_TAIL(cccp, gcmdp);
	}

exit:
	ghd_doneq_pollmode_exit(cccp);

	mutex_enter(&cccp->ccc_waitq_mutex);
	ghd_waitq_process_and_mutex_exit(cccp);

	return (rc);
}


/*
 * ghd_tran_abort_lun()
 *
 *	Abort all commands on a specific target.
 *
 */

int
ghd_tran_abort_lun(ccc_t *cccp,	gtgt_t *gtgtp, void *intr_status)
{
	int	 rc;

	/*
	 * call the HBA driver's abort_device function
	 */

	mutex_enter(&cccp->ccc_hba_mutex);
	ghd_doneq_pollmode_enter(cccp);

	/* send out the abort device request */
	ghd_timer_newstate(cccp, NULL, gtgtp, GACTION_ABORT_DEV, GHD_TGTREQ);

	/* wait for the device to go idle */
	rc = ghd_poll(cccp, GHD_POLL_DEVICE, ghd_tran_abort_lun_timeout,
	    NULL, gtgtp, intr_status);

	ghd_doneq_pollmode_exit(cccp);

	mutex_enter(&cccp->ccc_waitq_mutex);
	ghd_waitq_process_and_mutex_exit(cccp);

	return (rc);
}



/*
 * ghd_tran_reset_target()
 *
 *	reset the target device
 *
 *
 */

int
ghd_tran_reset_target(ccc_t *cccp, gtgt_t *gtgtp, void *intr_status)
{
	int rc = TRUE;


	mutex_enter(&cccp->ccc_hba_mutex);
	ghd_doneq_pollmode_enter(cccp);

	/* send out the device reset request */
	ghd_timer_newstate(cccp, NULL, gtgtp, GACTION_RESET_TARGET, GHD_TGTREQ);

	/* wait for the device to reset */
	rc = ghd_poll(cccp, GHD_POLL_DEVICE, ghd_tran_reset_target_timeout,
	    NULL, gtgtp, intr_status);

	ghd_doneq_pollmode_exit(cccp);

	mutex_enter(&cccp->ccc_waitq_mutex);
	ghd_waitq_process_and_mutex_exit(cccp);

	return (rc);
}



/*
 * ghd_tran_reset_bus()
 *
 *	reset the scsi bus
 *
 */

int
ghd_tran_reset_bus(ccc_t *cccp, gtgt_t *gtgtp, void *intr_status)
{
	int	rc;

	mutex_enter(&cccp->ccc_hba_mutex);
	ghd_doneq_pollmode_enter(cccp);

	/* send out the bus reset request */
	ghd_timer_newstate(cccp, NULL, gtgtp, GACTION_RESET_BUS, GHD_TGTREQ);

	/*
	 * Wait for all active requests on this HBA to complete
	 */
	rc = ghd_poll(cccp, GHD_POLL_ALL, ghd_tran_reset_bus_timeout,
	    NULL, NULL, intr_status);


	ghd_doneq_pollmode_exit(cccp);

	mutex_enter(&cccp->ccc_waitq_mutex);
	ghd_waitq_process_and_mutex_exit(cccp);

	return (rc);
}


int
ghd_transport(ccc_t	*cccp,
		gcmd_t	*gcmdp,
		gtgt_t	*gtgtp,
		ulong_t	 timeout,
		int	 polled,
		void	*intr_status)
{
	gdev_t	*gdevp = gtgtp->gt_gdevp;

	ASSERT(!mutex_owned(&cccp->ccc_hba_mutex));
	ASSERT(!mutex_owned(&cccp->ccc_waitq_mutex));

	if (polled) {
		/*
		 * Grab the HBA mutex so no other requests are started
		 * until after this one completes.
		 */
		mutex_enter(&cccp->ccc_hba_mutex);

		GDBG_START(("ghd_transport: polled"
		    " cccp 0x%p gdevp 0x%p gtgtp 0x%p gcmdp 0x%p\n",
		    (void *)cccp, (void *)gdevp, (void *)gtgtp, (void *)gcmdp));

		/*
		 * Lock the doneq so no other thread flushes the Q.
		 */
		ghd_doneq_pollmode_enter(cccp);
	}
#if defined(GHD_DEBUG) || defined(__lint)
	else {
		GDBG_START(("ghd_transport: non-polled"
		    " cccp 0x%p gdevp 0x%p gtgtp 0x%p gcmdp 0x%p\n",
		    (void *)cccp, (void *)gdevp, (void *)gtgtp, (void *)gcmdp));
	}
#endif
	/*
	 * add this request to the tail of the waitq
	 */
	gcmdp->cmd_waitq_level = 1;
	mutex_enter(&cccp->ccc_waitq_mutex);
	L2_add(&GDEV_QHEAD(gdevp), &gcmdp->cmd_q, gcmdp);

	/*
	 * Add this request to the packet timer active list and start its
	 * abort timer.
	 */
	gcmdp->cmd_state = GCMD_STATE_WAITQ;
	ghd_timer_start(cccp, gcmdp, timeout);


	/*
	 * Check the device wait queue throttle and perhaps move
	 * some requests to the end of the HBA wait queue.
	 */
	ghd_waitq_shuffle_up(cccp, gdevp);

	if (!polled) {
		/*
		 * See if the HBA mutex is available but use the
		 * tryenter so I don't deadlock.
		 */
		if (!mutex_tryenter(&cccp->ccc_hba_mutex)) {
			/* The HBA mutex isn't available */
			GDBG_START(("ghd_transport: !mutex cccp 0x%p\n",
			    (void *)cccp));
			mutex_exit(&cccp->ccc_waitq_mutex);
			return (TRAN_ACCEPT);
		}
		GDBG_START(("ghd_transport: got mutex cccp 0x%p\n",
		    (void *)cccp));

		/*
		 * start as many requests as possible from the head
		 * of the HBA wait queue
		 */

		ghd_waitq_process_and_mutex_exit(cccp);

		ASSERT(!mutex_owned(&cccp->ccc_hba_mutex));
		ASSERT(!mutex_owned(&cccp->ccc_waitq_mutex));

		return (TRAN_ACCEPT);
	}


	/*
	 * If polled mode (FLAG_NOINTR specified in scsi_pkt flags),
	 * then ghd_poll() waits until the request completes or times out
	 * before returning.
	 */

	mutex_exit(&cccp->ccc_waitq_mutex);
	(void) ghd_poll(cccp, GHD_POLL_REQUEST, 0, gcmdp, gtgtp, intr_status);
	ghd_doneq_pollmode_exit(cccp);

	mutex_enter(&cccp->ccc_waitq_mutex);
	ghd_waitq_process_and_mutex_exit(cccp);

	/* call HBA's completion function but don't do callback to target */
	(*cccp->ccc_hba_complete)(cccp->ccc_hba_handle, gcmdp, FALSE);

	GDBG_START(("ghd_transport: polled done cccp 0x%p\n", (void *)cccp));
	return (TRAN_ACCEPT);
}

int ghd_reset_notify(ccc_t 	*cccp,
			gtgt_t *gtgtp,
			int 	flag,
			void 	(*callback)(caddr_t),
			caddr_t arg)
{
	ghd_reset_notify_list_t *rnp;
	int rc = FALSE;

	switch (flag) {

	case SCSI_RESET_NOTIFY:

		rnp = (ghd_reset_notify_list_t *)kmem_zalloc(sizeof (*rnp),
		    KM_SLEEP);
		rnp->gtgtp = gtgtp;
		rnp->callback = callback;
		rnp->arg = arg;

		mutex_enter(&cccp->ccc_reset_notify_mutex);
		L2_add(&cccp->ccc_reset_notify_list, &rnp->l2_link,
		    (void *)rnp);
		mutex_exit(&cccp->ccc_reset_notify_mutex);

		rc = TRUE;

		break;

	case SCSI_RESET_CANCEL:

		mutex_enter(&cccp->ccc_reset_notify_mutex);
		for (rnp = (ghd_reset_notify_list_t *)
		    L2_next(&cccp->ccc_reset_notify_list);
		    rnp != NULL;
		    rnp = (ghd_reset_notify_list_t *)L2_next(&rnp->l2_link)) {
			if (rnp->gtgtp == gtgtp &&
			    rnp->callback == callback &&
			    rnp->arg == arg) {
				L2_delete(&rnp->l2_link);
				kmem_free(rnp, sizeof (*rnp));
				rc = TRUE;
			}
		}
		mutex_exit(&cccp->ccc_reset_notify_mutex);
		break;

	default:
		rc = FALSE;
		break;
	}

	return (rc);
}

/*
 * freeze the HBA waitq output (see ghd_waitq_process_and_mutex_hold),
 * presumably because of a SCSI reset, for delay milliseconds.
 */

void
ghd_freeze_waitq(ccc_t *cccp, int delay)
{
	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));

	/* freeze the waitq for delay milliseconds */

	mutex_enter(&cccp->ccc_waitq_mutex);
	cccp->ccc_waitq_freezetime = ddi_get_lbolt();
	cccp->ccc_waitq_freezedelay = delay;
	cccp->ccc_waitq_frozen = 1;
	mutex_exit(&cccp->ccc_waitq_mutex);
}

void
ghd_queue_hold(ccc_t *cccp)
{
	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));

	mutex_enter(&cccp->ccc_waitq_mutex);
	cccp->ccc_waitq_held = 1;
	mutex_exit(&cccp->ccc_waitq_mutex);
}

void
ghd_queue_unhold(ccc_t *cccp)
{
	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));

	mutex_enter(&cccp->ccc_waitq_mutex);
	cccp->ccc_waitq_held = 0;
	mutex_exit(&cccp->ccc_waitq_mutex);
}



/*
 * Trigger previously-registered reset notifications
 */

void
ghd_trigger_reset_notify(ccc_t *cccp)
{
	gcmd_t *gcmdp;

	ASSERT(mutex_owned(&cccp->ccc_hba_mutex));

	/* create magic doneq entry */

	gcmdp = ghd_gcmd_alloc((gtgt_t *)NULL, 0, TRUE);
	gcmdp->cmd_flags = GCMDFLG_RESET_NOTIFY;

	/* put at head of doneq so it's processed ASAP */

	GHD_DONEQ_PUT_HEAD(cccp, gcmdp);
}