1 // SPDX-License-Identifier: GPL-2.0
2
3 #include <linux/delay.h>
4 #include <linux/firmware.h>
5 #include <linux/module.h>
6
7 #include <drm/drm_atomic_state_helper.h>
8 #include <drm/drm_edid.h>
9 #include <drm/drm_modeset_helper_vtables.h>
10 #include <drm/drm_probe_helper.h>
11
12 #include "ast_drv.h"
13
14 MODULE_FIRMWARE("ast_dp501_fw.bin");
15
ast_release_firmware(void * data)16 static void ast_release_firmware(void *data)
17 {
18 struct ast_device *ast = data;
19
20 release_firmware(ast->dp501_fw);
21 ast->dp501_fw = NULL;
22 }
23
ast_load_dp501_microcode(struct ast_device * ast)24 static int ast_load_dp501_microcode(struct ast_device *ast)
25 {
26 struct drm_device *dev = &ast->base;
27 int ret;
28
29 ret = request_firmware(&ast->dp501_fw, "ast_dp501_fw.bin", dev->dev);
30 if (ret)
31 return ret;
32
33 return devm_add_action_or_reset(dev->dev, ast_release_firmware, ast);
34 }
35
send_ack(struct ast_device * ast)36 static void send_ack(struct ast_device *ast)
37 {
38 u8 sendack;
39 sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff);
40 sendack |= 0x80;
41 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack);
42 }
43
send_nack(struct ast_device * ast)44 static void send_nack(struct ast_device *ast)
45 {
46 u8 sendack;
47 sendack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0xff);
48 sendack &= ~0x80;
49 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, 0x00, sendack);
50 }
51
wait_ack(struct ast_device * ast)52 static bool wait_ack(struct ast_device *ast)
53 {
54 u8 waitack;
55 u32 retry = 0;
56 do {
57 waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff);
58 waitack &= 0x80;
59 udelay(100);
60 } while ((!waitack) && (retry++ < 1000));
61
62 if (retry < 1000)
63 return true;
64 else
65 return false;
66 }
67
wait_nack(struct ast_device * ast)68 static bool wait_nack(struct ast_device *ast)
69 {
70 u8 waitack;
71 u32 retry = 0;
72 do {
73 waitack = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff);
74 waitack &= 0x80;
75 udelay(100);
76 } while ((waitack) && (retry++ < 1000));
77
78 if (retry < 1000)
79 return true;
80 else
81 return false;
82 }
83
set_cmd_trigger(struct ast_device * ast)84 static void set_cmd_trigger(struct ast_device *ast)
85 {
86 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x40);
87 }
88
clear_cmd_trigger(struct ast_device * ast)89 static void clear_cmd_trigger(struct ast_device *ast)
90 {
91 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9b, ~0x40, 0x00);
92 }
93
94 #if 0
95 static bool wait_fw_ready(struct ast_device *ast)
96 {
97 u8 waitready;
98 u32 retry = 0;
99 do {
100 waitready = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd2, 0xff);
101 waitready &= 0x40;
102 udelay(100);
103 } while ((!waitready) && (retry++ < 1000));
104
105 if (retry < 1000)
106 return true;
107 else
108 return false;
109 }
110 #endif
111
ast_write_cmd(struct ast_device * ast,u8 data)112 static bool ast_write_cmd(struct ast_device *ast, u8 data)
113 {
114 int retry = 0;
115
116 if (wait_nack(ast)) {
117 send_nack(ast);
118 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data);
119 send_ack(ast);
120 set_cmd_trigger(ast);
121 do {
122 if (wait_ack(ast)) {
123 clear_cmd_trigger(ast);
124 send_nack(ast);
125 return true;
126 }
127 } while (retry++ < 100);
128 }
129 clear_cmd_trigger(ast);
130 send_nack(ast);
131 return false;
132 }
133
ast_write_data(struct ast_device * ast,u8 data)134 static bool ast_write_data(struct ast_device *ast, u8 data)
135 {
136 if (wait_nack(ast)) {
137 send_nack(ast);
138 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, data);
139 send_ack(ast);
140 if (wait_ack(ast)) {
141 send_nack(ast);
142 return true;
143 }
144 }
145 send_nack(ast);
146 return false;
147 }
148
149 #if 0
150 static bool ast_read_data(struct drm_device *dev, u8 *data)
151 {
152 struct ast_device *ast = to_ast_device(dev);
153 u8 tmp;
154
155 *data = 0;
156
157 if (wait_ack(ast) == false)
158 return false;
159 tmp = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd3, 0xff);
160 *data = tmp;
161 if (wait_nack(ast) == false) {
162 send_nack(ast);
163 return false;
164 }
165 send_nack(ast);
166 return true;
167 }
168
169 static void clear_cmd(struct ast_device *ast)
170 {
171 send_nack(ast);
172 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0x9a, 0x00, 0x00);
173 }
174 #endif
175
ast_set_dp501_video_output(struct ast_device * ast,u8 mode)176 static void ast_set_dp501_video_output(struct ast_device *ast, u8 mode)
177 {
178 ast_write_cmd(ast, 0x40);
179 ast_write_data(ast, mode);
180
181 msleep(10);
182 }
183
get_fw_base(struct ast_device * ast)184 static u32 get_fw_base(struct ast_device *ast)
185 {
186 return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff;
187 }
188
ast_backup_fw(struct ast_device * ast,u8 * addr,u32 size)189 bool ast_backup_fw(struct ast_device *ast, u8 *addr, u32 size)
190 {
191 u32 i, data;
192 u32 boot_address;
193
194 if (ast->config_mode != ast_use_p2a)
195 return false;
196
197 data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
198 if (data) {
199 boot_address = get_fw_base(ast);
200 for (i = 0; i < size; i += 4)
201 *(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i);
202 return true;
203 }
204 return false;
205 }
206
ast_launch_m68k(struct ast_device * ast)207 static bool ast_launch_m68k(struct ast_device *ast)
208 {
209 u32 i, data, len = 0;
210 u32 boot_address;
211 u8 *fw_addr = NULL;
212 u8 jreg;
213
214 if (ast->config_mode != ast_use_p2a)
215 return false;
216
217 data = ast_mindwm(ast, 0x1e6e2100) & 0x01;
218 if (!data) {
219
220 if (ast->dp501_fw_addr) {
221 fw_addr = ast->dp501_fw_addr;
222 len = 32*1024;
223 } else {
224 if (!ast->dp501_fw &&
225 ast_load_dp501_microcode(ast) < 0)
226 return false;
227
228 fw_addr = (u8 *)ast->dp501_fw->data;
229 len = ast->dp501_fw->size;
230 }
231 /* Get BootAddress */
232 ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
233 data = ast_mindwm(ast, 0x1e6e0004);
234 switch (data & 0x03) {
235 case 0:
236 boot_address = 0x44000000;
237 break;
238 default:
239 case 1:
240 boot_address = 0x48000000;
241 break;
242 case 2:
243 boot_address = 0x50000000;
244 break;
245 case 3:
246 boot_address = 0x60000000;
247 break;
248 }
249 boot_address -= 0x200000; /* -2MB */
250
251 /* copy image to buffer */
252 for (i = 0; i < len; i += 4) {
253 data = *(u32 *)(fw_addr + i);
254 ast_moutdwm(ast, boot_address + i, data);
255 }
256
257 /* Init SCU */
258 ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8);
259
260 /* Launch FW */
261 ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address);
262 ast_moutdwm(ast, 0x1e6e2100, 1);
263
264 /* Update Scratch */
265 data = ast_mindwm(ast, 0x1e6e2040) & 0xfffff1ff; /* D[11:9] = 100b: UEFI handling */
266 data |= 0x800;
267 ast_moutdwm(ast, 0x1e6e2040, data);
268
269 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0x99, 0xfc); /* D[1:0]: Reserved Video Buffer */
270 jreg |= 0x02;
271 ast_set_index_reg(ast, AST_IO_VGACRI, 0x99, jreg);
272 }
273 return true;
274 }
275
ast_dp501_is_connected(struct ast_device * ast)276 static bool ast_dp501_is_connected(struct ast_device *ast)
277 {
278 u32 boot_address, offset, data;
279
280 if (ast->config_mode == ast_use_p2a) {
281 boot_address = get_fw_base(ast);
282
283 /* validate FW version */
284 offset = AST_DP501_GBL_VERSION;
285 data = ast_mindwm(ast, boot_address + offset);
286 if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1)
287 return false;
288
289 /* validate PnP Monitor */
290 offset = AST_DP501_PNPMONITOR;
291 data = ast_mindwm(ast, boot_address + offset);
292 if (!(data & AST_DP501_PNP_CONNECTED))
293 return false;
294 } else {
295 if (!ast->dp501_fw_buf)
296 return false;
297
298 /* dummy read */
299 offset = 0x0000;
300 data = readl(ast->dp501_fw_buf + offset);
301
302 /* validate FW version */
303 offset = AST_DP501_GBL_VERSION;
304 data = readl(ast->dp501_fw_buf + offset);
305 if ((data & AST_DP501_FW_VERSION_MASK) != AST_DP501_FW_VERSION_1)
306 return false;
307
308 /* validate PnP Monitor */
309 offset = AST_DP501_PNPMONITOR;
310 data = readl(ast->dp501_fw_buf + offset);
311 if (!(data & AST_DP501_PNP_CONNECTED))
312 return false;
313 }
314 return true;
315 }
316
ast_dp512_read_edid_block(void * data,u8 * buf,unsigned int block,size_t len)317 static int ast_dp512_read_edid_block(void *data, u8 *buf, unsigned int block, size_t len)
318 {
319 struct ast_device *ast = data;
320 size_t rdlen = round_up(len, 4);
321 u32 i, boot_address, offset, ediddata;
322
323 if (block > (512 / EDID_LENGTH))
324 return -EIO;
325
326 offset = AST_DP501_EDID_DATA + block * EDID_LENGTH;
327
328 if (ast->config_mode == ast_use_p2a) {
329 boot_address = get_fw_base(ast);
330
331 for (i = 0; i < rdlen; i += 4) {
332 ediddata = ast_mindwm(ast, boot_address + offset + i);
333 memcpy(buf, &ediddata, min((len - i), 4));
334 buf += 4;
335 }
336 } else {
337 for (i = 0; i < rdlen; i += 4) {
338 ediddata = readl(ast->dp501_fw_buf + offset + i);
339 memcpy(buf, &ediddata, min((len - i), 4));
340 buf += 4;
341 }
342 }
343
344 return true;
345 }
346
ast_init_dvo(struct ast_device * ast)347 static bool ast_init_dvo(struct ast_device *ast)
348 {
349 u8 jreg;
350 u32 data;
351 ast_write32(ast, 0xf004, 0x1e6e0000);
352 ast_write32(ast, 0xf000, 0x1);
353 ast_write32(ast, 0x12000, 0x1688a8a8);
354
355 jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff);
356 if (!(jreg & 0x80)) {
357 /* Init SCU DVO Settings */
358 data = ast_read32(ast, 0x12008);
359 /* delay phase */
360 data &= 0xfffff8ff;
361 data |= 0x00000500;
362 ast_write32(ast, 0x12008, data);
363
364 if (IS_AST_GEN4(ast)) {
365 data = ast_read32(ast, 0x12084);
366 /* multi-pins for DVO single-edge */
367 data |= 0xfffe0000;
368 ast_write32(ast, 0x12084, data);
369
370 data = ast_read32(ast, 0x12088);
371 /* multi-pins for DVO single-edge */
372 data |= 0x000fffff;
373 ast_write32(ast, 0x12088, data);
374
375 data = ast_read32(ast, 0x12090);
376 /* multi-pins for DVO single-edge */
377 data &= 0xffffffcf;
378 data |= 0x00000020;
379 ast_write32(ast, 0x12090, data);
380 } else { /* AST GEN5+ */
381 data = ast_read32(ast, 0x12088);
382 /* multi-pins for DVO single-edge */
383 data |= 0x30000000;
384 ast_write32(ast, 0x12088, data);
385
386 data = ast_read32(ast, 0x1208c);
387 /* multi-pins for DVO single-edge */
388 data |= 0x000000cf;
389 ast_write32(ast, 0x1208c, data);
390
391 data = ast_read32(ast, 0x120a4);
392 /* multi-pins for DVO single-edge */
393 data |= 0xffff0000;
394 ast_write32(ast, 0x120a4, data);
395
396 data = ast_read32(ast, 0x120a8);
397 /* multi-pins for DVO single-edge */
398 data |= 0x0000000f;
399 ast_write32(ast, 0x120a8, data);
400
401 data = ast_read32(ast, 0x12094);
402 /* multi-pins for DVO single-edge */
403 data |= 0x00000002;
404 ast_write32(ast, 0x12094, data);
405 }
406 }
407
408 /* Force to DVO */
409 data = ast_read32(ast, 0x1202c);
410 data &= 0xfffbffff;
411 ast_write32(ast, 0x1202c, data);
412
413 /* Init VGA DVO Settings */
414 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x80);
415 return true;
416 }
417
418
ast_init_analog(struct ast_device * ast)419 static void ast_init_analog(struct ast_device *ast)
420 {
421 u32 data;
422
423 /*
424 * Set DAC source to VGA mode in SCU2C via the P2A
425 * bridge. First configure the P2U to target the SCU
426 * in case it isn't at this stage.
427 */
428 ast_write32(ast, 0xf004, 0x1e6e0000);
429 ast_write32(ast, 0xf000, 0x1);
430
431 /* Then unlock the SCU with the magic password */
432 ast_write32(ast, 0x12000, 0x1688a8a8);
433 ast_write32(ast, 0x12000, 0x1688a8a8);
434 ast_write32(ast, 0x12000, 0x1688a8a8);
435
436 /* Finally, clear bits [17:16] of SCU2c */
437 data = ast_read32(ast, 0x1202c);
438 data &= 0xfffcffff;
439 ast_write32(ast, 0, data);
440
441 /* Disable DVO */
442 ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xcf, 0x00);
443 }
444
ast_init_3rdtx(struct ast_device * ast)445 void ast_init_3rdtx(struct ast_device *ast)
446 {
447 u8 vgacrd1;
448
449 if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) {
450 vgacrd1 = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1,
451 AST_IO_VGACRD1_TX_TYPE_MASK);
452 switch (vgacrd1) {
453 case AST_IO_VGACRD1_TX_SIL164_VBIOS:
454 ast_init_dvo(ast);
455 break;
456 case AST_IO_VGACRD1_TX_DP501_VBIOS:
457 ast_launch_m68k(ast);
458 break;
459 case AST_IO_VGACRD1_TX_FW_EMBEDDED_FW:
460 ast_init_dvo(ast);
461 break;
462 default:
463 if (ast->tx_chip == AST_TX_SIL164)
464 ast_init_dvo(ast);
465 else
466 ast_init_analog(ast);
467 }
468 }
469 }
470
471 /*
472 * Encoder
473 */
474
475 static const struct drm_encoder_funcs ast_dp501_encoder_funcs = {
476 .destroy = drm_encoder_cleanup,
477 };
478
ast_dp501_encoder_helper_atomic_enable(struct drm_encoder * encoder,struct drm_atomic_state * state)479 static void ast_dp501_encoder_helper_atomic_enable(struct drm_encoder *encoder,
480 struct drm_atomic_state *state)
481 {
482 struct ast_device *ast = to_ast_device(encoder->dev);
483
484 ast_set_dp501_video_output(ast, 1);
485 }
486
ast_dp501_encoder_helper_atomic_disable(struct drm_encoder * encoder,struct drm_atomic_state * state)487 static void ast_dp501_encoder_helper_atomic_disable(struct drm_encoder *encoder,
488 struct drm_atomic_state *state)
489 {
490 struct ast_device *ast = to_ast_device(encoder->dev);
491
492 ast_set_dp501_video_output(ast, 0);
493 }
494
495 static const struct drm_encoder_helper_funcs ast_dp501_encoder_helper_funcs = {
496 .atomic_enable = ast_dp501_encoder_helper_atomic_enable,
497 .atomic_disable = ast_dp501_encoder_helper_atomic_disable,
498 };
499
500 /*
501 * Connector
502 */
503
ast_dp501_connector_helper_get_modes(struct drm_connector * connector)504 static int ast_dp501_connector_helper_get_modes(struct drm_connector *connector)
505 {
506 struct ast_connector *ast_connector = to_ast_connector(connector);
507 int count;
508
509 if (ast_connector->physical_status == connector_status_connected) {
510 struct ast_device *ast = to_ast_device(connector->dev);
511 const struct drm_edid *drm_edid;
512
513 drm_edid = drm_edid_read_custom(connector, ast_dp512_read_edid_block, ast);
514 drm_edid_connector_update(connector, drm_edid);
515 count = drm_edid_connector_add_modes(connector);
516 drm_edid_free(drm_edid);
517 } else {
518 drm_edid_connector_update(connector, NULL);
519
520 /*
521 * There's no EDID data without a connected monitor. Set BMC-
522 * compatible modes in this case. The XGA default resolution
523 * should work well for all BMCs.
524 */
525 count = drm_add_modes_noedid(connector, 4096, 4096);
526 if (count)
527 drm_set_preferred_mode(connector, 1024, 768);
528 }
529
530 return count;
531 }
532
ast_dp501_connector_helper_detect_ctx(struct drm_connector * connector,struct drm_modeset_acquire_ctx * ctx,bool force)533 static int ast_dp501_connector_helper_detect_ctx(struct drm_connector *connector,
534 struct drm_modeset_acquire_ctx *ctx,
535 bool force)
536 {
537 struct ast_connector *ast_connector = to_ast_connector(connector);
538 struct ast_device *ast = to_ast_device(connector->dev);
539 enum drm_connector_status status = connector_status_disconnected;
540
541 if (ast_dp501_is_connected(ast))
542 status = connector_status_connected;
543
544 if (status != ast_connector->physical_status)
545 ++connector->epoch_counter;
546 ast_connector->physical_status = status;
547
548 return connector_status_connected;
549 }
550
551 static const struct drm_connector_helper_funcs ast_dp501_connector_helper_funcs = {
552 .get_modes = ast_dp501_connector_helper_get_modes,
553 .detect_ctx = ast_dp501_connector_helper_detect_ctx,
554 };
555
556 static const struct drm_connector_funcs ast_dp501_connector_funcs = {
557 .reset = drm_atomic_helper_connector_reset,
558 .fill_modes = drm_helper_probe_single_connector_modes,
559 .destroy = drm_connector_cleanup,
560 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
561 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
562 };
563
564 /*
565 * Output
566 */
567
ast_dp501_output_init(struct ast_device * ast)568 int ast_dp501_output_init(struct ast_device *ast)
569 {
570 struct drm_device *dev = &ast->base;
571 struct drm_crtc *crtc = &ast->crtc;
572 struct drm_encoder *encoder;
573 struct ast_connector *ast_connector;
574 struct drm_connector *connector;
575 int ret;
576
577 /* encoder */
578
579 encoder = &ast->output.dp501.encoder;
580 ret = drm_encoder_init(dev, encoder, &ast_dp501_encoder_funcs,
581 DRM_MODE_ENCODER_TMDS, NULL);
582 if (ret)
583 return ret;
584 drm_encoder_helper_add(encoder, &ast_dp501_encoder_helper_funcs);
585
586 encoder->possible_crtcs = drm_crtc_mask(crtc);
587
588 /* connector */
589
590 ast_connector = &ast->output.dp501.connector;
591 connector = &ast_connector->base;
592 ret = drm_connector_init(dev, connector, &ast_dp501_connector_funcs,
593 DRM_MODE_CONNECTOR_DisplayPort);
594 if (ret)
595 return ret;
596 drm_connector_helper_add(connector, &ast_dp501_connector_helper_funcs);
597
598 connector->interlace_allowed = 0;
599 connector->doublescan_allowed = 0;
600 connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
601
602 ast_connector->physical_status = connector->status;
603
604 ret = drm_connector_attach_encoder(connector, encoder);
605 if (ret)
606 return ret;
607
608 return 0;
609 }
610