1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright (c) 2012 Gary Mills
24 *
25 * Copyright 2010 Sun Microsystems, Inc. All rights reserved.
26 * Use is subject to license terms.
27 */
28
29 /*
30 * isa-specific console configuration routines
31 */
32
33 #include <sys/types.h>
34 #include <sys/param.h>
35 #include <sys/cmn_err.h>
36 #include <sys/systm.h>
37 #include <sys/conf.h>
38 #include <sys/debug.h>
39 #include <sys/ddi.h>
40 #include <sys/sunddi.h>
41 #include <sys/sunndi.h>
42 #include <sys/esunddi.h>
43 #include <sys/ddi_impldefs.h>
44 #include <sys/promif.h>
45 #include <sys/modctl.h>
46 #include <sys/termios.h>
47 #include <sys/pci.h>
48 #include <sys/framebuffer.h>
49 #include <sys/boot_console.h>
50 #if defined(__xpv)
51 #include <sys/hypervisor.h>
52 #endif
53
54 extern int pseudo_isa;
55
56 int
plat_use_polled_debug()57 plat_use_polled_debug()
58 {
59 return (0);
60 }
61
62 int
plat_support_serial_kbd_and_ms()63 plat_support_serial_kbd_and_ms()
64 {
65 return (0);
66 }
67
68 #define A_CNT(arr) (sizeof (arr) / sizeof (arr[0]))
69
70 #ifndef CONS_INVALID
71 #define CONS_INVALID -1
72 #define CONS_SCREEN_TEXT 0
73 #define CONS_TTY 1
74 #define CONS_XXX 2 /* Unused */
75 #define CONS_USBSER 3
76 #define CONS_HYPERVISOR 4
77 #define CONS_SCREEN_GRAPHICS 5
78 #endif /* CONS_INVALID */
79
80 char *plat_fbpath(void);
81
82 static int
console_type(int * tnum)83 console_type(int *tnum)
84 {
85 static int boot_console = CONS_INVALID;
86 static int tty_num = 0;
87
88 char *cons;
89 dev_info_t *root;
90
91 /* If we already have determined the console, just return it. */
92 if (boot_console != CONS_INVALID) {
93 if (tnum != NULL)
94 *tnum = tty_num;
95 return (boot_console);
96 }
97
98 #if defined(__xpv)
99 if (!DOMAIN_IS_INITDOMAIN(xen_info) || bcons_hypervisor_redirect()) {
100 boot_console = CONS_HYPERVISOR;
101 if (tnum != NULL)
102 *tnum = tty_num;
103 return (boot_console);
104 }
105 #endif /* __xpv */
106
107 /*
108 * console is defined by "console" property, with
109 * fallback on the old "input-device" property.
110 * If "input-device" is not defined either, also check "output-device".
111 */
112 boot_console = CONS_SCREEN_TEXT; /* default is screen/kb */
113 root = ddi_root_node();
114 if ((ddi_prop_lookup_string(DDI_DEV_T_ANY, root,
115 DDI_PROP_DONTPASS, "console", &cons) == DDI_SUCCESS) ||
116 (ddi_prop_lookup_string(DDI_DEV_T_ANY, root,
117 DDI_PROP_DONTPASS, "input-device", &cons) == DDI_SUCCESS) ||
118 (ddi_prop_lookup_string(DDI_DEV_T_ANY, root,
119 DDI_PROP_DONTPASS, "output-device", &cons) == DDI_SUCCESS)) {
120 if (strlen(cons) == 4 && strncmp(cons, "tty", 3) == 0 &&
121 cons[3] >= 'a' && cons[3] <= 'd') {
122 boot_console = CONS_TTY;
123 tty_num = cons[3] - 'a';
124 } else if (strcmp(cons, "usb-serial") == 0) {
125 (void) i_ddi_attach_hw_nodes("xhci");
126 (void) i_ddi_attach_hw_nodes("ehci");
127 (void) i_ddi_attach_hw_nodes("uhci");
128 (void) i_ddi_attach_hw_nodes("ohci");
129 /*
130 * USB device enumerate asynchronously.
131 * Wait 2 seconds for USB serial devices to attach.
132 */
133 delay(drv_usectohz(2000000));
134 boot_console = CONS_USBSER;
135 #if defined(__xpv)
136 } else if (strcmp(cons, "hypervisor") == 0) {
137 boot_console = CONS_HYPERVISOR;
138 #endif /* __xpv */
139 }
140 ddi_prop_free(cons);
141 }
142
143 /*
144 * If the console is configured to use a framebuffer but none
145 * could be found, fallback to "ttya" since it's likely to exist
146 * and it matches longstanding behavior on SPARC.
147 */
148 if (boot_console == CONS_SCREEN_TEXT && plat_fbpath() == NULL) {
149 boot_console = CONS_TTY;
150 tty_num = 0;
151 }
152
153 if (tnum != NULL)
154 *tnum = tty_num;
155 return (boot_console);
156 }
157
158 int
plat_stdin_is_keyboard(void)159 plat_stdin_is_keyboard(void)
160 {
161 return (console_type(NULL) == CONS_SCREEN_TEXT);
162 }
163
164 int
plat_stdout_is_framebuffer(void)165 plat_stdout_is_framebuffer(void)
166 {
167 return (console_type(NULL) == CONS_SCREEN_TEXT);
168 }
169
170 static char *
plat_devpath(char * name,char * path)171 plat_devpath(char *name, char *path)
172 {
173 major_t major;
174 dev_info_t *dip, *pdip;
175
176 if ((major = ddi_name_to_major(name)) == (major_t)-1)
177 return (NULL);
178
179 if ((dip = devnamesp[major].dn_head) == NULL)
180 return (NULL);
181
182 pdip = ddi_get_parent(dip);
183 if (i_ddi_attach_node_hierarchy(pdip) != DDI_SUCCESS)
184 return (NULL);
185 if (ddi_initchild(pdip, dip) != DDI_SUCCESS)
186 return (NULL);
187
188 (void) ddi_pathname(dip, path);
189
190 return (path);
191 }
192
193 /*
194 * Return generic path to keyboard device from the alias.
195 */
196 char *
plat_kbdpath(void)197 plat_kbdpath(void)
198 {
199 static char kbpath[MAXPATHLEN];
200
201 /*
202 * Hardcode to isa keyboard path
203 * XXX make it settable via bootprop?
204 */
205 if (pseudo_isa)
206 return ("/isa/i8042@1,60/keyboard@0");
207
208 if (plat_devpath("kb8042", kbpath) == NULL)
209 return (NULL);
210
211 return (kbpath);
212 }
213
214 /*
215 * NOTE: this function is duplicated here and in gfx_private/vgatext while
216 * we work on a set of commitable interfaces to sunpci.c.
217 *
218 * Use the class code to determine if the device is a PCI-to-PCI bridge.
219 * Returns: B_TRUE if the device is a bridge.
220 * B_FALSE if the device is not a bridge or the property cannot be
221 * retrieved.
222 */
223 static boolean_t
is_pci_bridge(dev_info_t * dip)224 is_pci_bridge(dev_info_t *dip)
225 {
226 uint32_t class_code;
227
228 class_code = (uint32_t)ddi_prop_get_int(DDI_DEV_T_ANY, dip,
229 DDI_PROP_DONTPASS, "class-code", 0xffffffff);
230
231 if (class_code == 0xffffffff || class_code == DDI_PROP_NOT_FOUND)
232 return (B_FALSE);
233
234 class_code &= 0x00ffff00;
235 if (class_code == ((PCI_CLASS_BRIDGE << 16) | (PCI_BRIDGE_PCI << 8)))
236 return (B_TRUE);
237
238 return (B_FALSE);
239 }
240
241 /*
242 * Type for the parameter of find_fb_dev()
243 */
244 struct find_fb_dev_param
245 {
246 dev_info_t *found_dip; /* dip found for VGA console */
247 int vga_enable; /* check PCI_BCNF_BCNTRL_VGA_ENABLE or not */
248 };
249
250 /*
251 * The VGA device could be under a subtractive PCI bridge on some systems.
252 * Though the PCI_BCNF_BCNTRL_VGA_ENABLE bit is not set on such subtractive
253 * PCI bridge, the subtractive PCI bridge can forward VGA access if no other
254 * agent claims the access.
255 * The vga_enable element in param acts as a flag, if not set, ignore the
256 * checking for the PCI_BCNF_BCNTRL_VGA_ENABLE bit of the PCI bridge during
257 * the search.
258 */
259 static int
find_fb_dev(dev_info_t * dip,void * param)260 find_fb_dev(dev_info_t *dip, void *param)
261 {
262 struct find_fb_dev_param *p = param;
263 char *dev_type;
264 dev_info_t *pdip;
265 char *parent_type;
266
267 if (dip == ddi_root_node())
268 return (DDI_WALK_CONTINUE);
269
270 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
271 "device_type", &dev_type) != DDI_SUCCESS)
272 return (DDI_WALK_PRUNECHILD);
273
274 if ((strcmp(dev_type, "isa") == 0) || (strcmp(dev_type, "eisa") == 0)) {
275 ddi_prop_free(dev_type);
276 return (DDI_WALK_CONTINUE);
277 }
278
279 if ((strcmp(dev_type, "pci") == 0) ||
280 (strcmp(dev_type, "pciex") == 0)) {
281 ddi_acc_handle_t pci_conf;
282 uint16_t data16;
283 char *nodename;
284
285 ddi_prop_free(dev_type);
286
287 if (!p->vga_enable)
288 return (DDI_WALK_CONTINUE);
289
290 nodename = ddi_node_name(dip);
291
292 /*
293 * If the node is not a PCI-to-PCI bridge, continue traversing
294 * (it could be the root node), otherwise, check for the
295 * VGAEnable bit to be set in the Bridge Control Register.
296 */
297 if (strcmp(nodename, "pci") == 0) {
298 if (is_pci_bridge(dip) == B_FALSE)
299 return (DDI_WALK_CONTINUE);
300 }
301
302 if (i_ddi_attach_node_hierarchy(dip) != DDI_SUCCESS)
303 return (DDI_WALK_PRUNECHILD);
304
305 if (pci_config_setup(dip, &pci_conf) != DDI_SUCCESS)
306 return (DDI_WALK_PRUNECHILD);
307
308 data16 = pci_config_get16(pci_conf, PCI_BCNF_BCNTRL);
309 pci_config_teardown(&pci_conf);
310
311 if (data16 & PCI_BCNF_BCNTRL_VGA_ENABLE)
312 return (DDI_WALK_CONTINUE);
313
314 return (DDI_WALK_PRUNECHILD);
315 }
316
317 if (strcmp(dev_type, "display") != 0) {
318 ddi_prop_free(dev_type);
319 return (DDI_WALK_CONTINUE);
320 }
321
322 ddi_prop_free(dev_type);
323
324 if ((pdip = ddi_get_parent(dip)) == NULL)
325 return (DDI_WALK_PRUNECHILD);
326
327 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, pdip, DDI_PROP_DONTPASS,
328 "device_type", &parent_type) != DDI_SUCCESS)
329 return (DDI_WALK_PRUNECHILD);
330
331 if ((strcmp(parent_type, "isa") == 0) ||
332 (strcmp(parent_type, "eisa") == 0)) {
333 p->found_dip = dip;
334 ddi_prop_free(parent_type);
335 return (DDI_WALK_TERMINATE);
336 }
337
338 if ((strcmp(parent_type, "pci") == 0) ||
339 (strcmp(parent_type, "pciex") == 0)) {
340 ddi_acc_handle_t pci_conf;
341 uint16_t data16;
342
343 ddi_prop_free(parent_type);
344
345 if (i_ddi_attach_node_hierarchy(dip) != DDI_SUCCESS)
346 return (DDI_WALK_PRUNECHILD);
347
348 if (pci_config_setup(dip, &pci_conf) != DDI_SUCCESS)
349 return (DDI_WALK_PRUNECHILD);
350
351 data16 = pci_config_get16(pci_conf, PCI_CONF_COMM);
352 pci_config_teardown(&pci_conf);
353
354 if (!(data16 & PCI_COMM_IO))
355 return (DDI_WALK_PRUNECHILD);
356
357 p->found_dip = dip;
358 return (DDI_WALK_TERMINATE);
359 }
360
361 ddi_prop_free(parent_type);
362 return (DDI_WALK_PRUNECHILD);
363 }
364
365 /*
366 * The first round search is to find:
367 * 1) a VGA device.
368 * 2) a PCI VGA compatible device whose IO space is enabled
369 * and the VGA Enable bit of any PCI-PCI bridge above it is set.
370 * If the first round search succeeds, prune the second round search.
371 *
372 * The second round seach does not check the VGA Enable bit.
373 *
374 * Return the device path as the console fb path.
375 */
376 char *
plat_fbpath(void)377 plat_fbpath(void)
378 {
379 struct find_fb_dev_param param;
380 static char *fbpath = NULL;
381 static char fbpath_buf[MAXPATHLEN];
382
383 /* first round search */
384 param.found_dip = NULL;
385 param.vga_enable = 1;
386 ddi_walk_devs(ddi_root_node(), find_fb_dev, ¶m);
387
388 if (param.found_dip != NULL) {
389 (void) ddi_pathname(param.found_dip, fbpath_buf);
390 fbpath = fbpath_buf;
391 return (fbpath);
392 }
393
394 /*
395 * second round search, do not check the
396 * PCI_BCNF_BCNTRL_VGA_ENABLE bit
397 */
398 param.found_dip = NULL;
399 param.vga_enable = 0;
400 ddi_walk_devs(ddi_root_node(), find_fb_dev, ¶m);
401
402 if (param.found_dip == NULL)
403 return (NULL);
404
405 (void) ddi_pathname(param.found_dip, fbpath_buf);
406 fbpath = fbpath_buf;
407 return (fbpath);
408 }
409
410 char *
plat_mousepath(void)411 plat_mousepath(void)
412 {
413 static char mpath[MAXPATHLEN];
414
415 /*
416 * Hardcode to isa mouse path
417 * XXX make it settable via bootprop?
418 */
419 if (pseudo_isa)
420 return ("/isa/i8042@1,60/mouse@1");
421
422 if (plat_devpath("mouse8042", mpath) == NULL)
423 return (NULL);
424
425 return (mpath);
426 }
427
428 /* return path of first usb serial device */
429 static char *
plat_usbser_path(void)430 plat_usbser_path(void)
431 {
432 extern dev_info_t *usbser_first_device(void);
433
434 dev_info_t *us_dip;
435 static char *us_path = NULL;
436
437 if (us_path)
438 return (us_path);
439
440 us_dip = usbser_first_device();
441 if (us_dip == NULL)
442 return (NULL);
443
444 us_path = kmem_alloc(MAXPATHLEN, KM_SLEEP);
445 (void) ddi_pathname(us_dip, us_path);
446 ndi_rele_devi(us_dip); /* held from usbser_first_device */
447 return (us_path);
448 }
449
450 static char *
plat_ttypath(int inum)451 plat_ttypath(int inum)
452 {
453 static char *defaultpath[] = {
454 "/isa/asy@1,3f8:a",
455 "/isa/asy@1,2f8:b",
456 "/isa/asy@1,3e8:c",
457 "/isa/asy@1,2e8:d"
458 };
459 static char path[MAXPATHLEN];
460 char *bp;
461 major_t major;
462 dev_info_t *dip;
463
464 if (pseudo_isa)
465 return (defaultpath[inum]);
466
467 if ((major = ddi_name_to_major("asy")) == (major_t)-1)
468 return (NULL);
469
470 if ((dip = devnamesp[major].dn_head) == NULL)
471 return (NULL);
472
473 for (; dip != NULL; dip = ddi_get_next(dip)) {
474 if (i_ddi_attach_node_hierarchy(dip) != DDI_SUCCESS)
475 return (NULL);
476
477 if (DEVI(dip)->devi_minor->ddm_name[0] == ('a' + (char)inum))
478 break;
479 }
480 if (dip == NULL)
481 return (NULL);
482
483 (void) ddi_pathname(dip, path);
484 bp = path + strlen(path);
485 (void) snprintf(bp, 3, ":%s", DEVI(dip)->devi_minor->ddm_name);
486
487 return (path);
488 }
489
490 /*
491 * Another possible enhancement could be to use properties
492 * for the port mapping rather than simply hard-code them.
493 */
494 char *
plat_stdinpath(void)495 plat_stdinpath(void)
496 {
497 int tty_num = 0;
498
499 switch (console_type(&tty_num)) {
500 #if defined(__xpv)
501 case CONS_HYPERVISOR:
502 return ("/xpvd/xencons@0");
503 #endif /* __xpv */
504 case CONS_TTY:
505 return (plat_ttypath(tty_num));
506 case CONS_USBSER:
507 return (plat_usbser_path());
508 case CONS_SCREEN_TEXT:
509 default:
510 break;
511 };
512 return (plat_kbdpath());
513 }
514
515 char *
plat_stdoutpath(void)516 plat_stdoutpath(void)
517 {
518 int tty_num = 0;
519
520 switch (console_type(&tty_num)) {
521 #if defined(__xpv)
522 case CONS_HYPERVISOR:
523 return ("/xpvd/xencons@0");
524 #endif /* __xpv */
525 case CONS_TTY:
526 return (plat_ttypath(tty_num));
527 case CONS_USBSER:
528 return (plat_usbser_path());
529 case CONS_SCREEN_TEXT:
530 default:
531 break;
532 };
533 return (plat_fbpath());
534 }
535
536 char *
plat_diagpath(void)537 plat_diagpath(void)
538 {
539 dev_info_t *root;
540 char *diag;
541 int tty_num = -1;
542
543 root = ddi_root_node();
544
545 if (ddi_prop_lookup_string(DDI_DEV_T_ANY, root, DDI_PROP_DONTPASS,
546 "diag-device", &diag) == DDI_SUCCESS) {
547 if (strlen(diag) == 4 && strncmp(diag, "tty", 3) == 0 &&
548 diag[3] >= 'a' && diag[3] <= 'd') {
549 tty_num = diag[3] - 'a';
550 }
551 ddi_prop_free(diag);
552 }
553
554 if (tty_num != -1)
555 return (plat_ttypath(tty_num));
556 return (NULL);
557 }
558
559 /*
560 * If VIS_PIXEL mode will be implemented on x86, these following
561 * functions should be re-considered. Now these functions are
562 * unused on x86.
563 */
564 void
plat_tem_get_colors(uint8_t * fg,uint8_t * bg)565 plat_tem_get_colors(uint8_t *fg, uint8_t *bg)
566 {
567 *fg = fb_info.fg_color;
568 *bg = fb_info.bg_color;
569 }
570
571 void
plat_tem_get_inverses(int * inverse,int * inverse_screen)572 plat_tem_get_inverses(int *inverse, int *inverse_screen)
573 {
574 *inverse = fb_info.inverse == B_TRUE? 1 : 0;
575 *inverse_screen = fb_info.inverse_screen == B_TRUE? 1 : 0;
576 }
577
578 void
plat_tem_get_prom_font_size(int * charheight,int * windowtop)579 plat_tem_get_prom_font_size(int *charheight, int *windowtop)
580 {
581 *charheight = fb_info.font_height;
582 *windowtop = fb_info.terminal_origin.y;
583 }
584
585 /*ARGSUSED*/
586 void
plat_tem_get_prom_size(size_t * height,size_t * width)587 plat_tem_get_prom_size(size_t *height, size_t *width)
588 {
589 *height = fb_info.terminal.y;
590 *width = fb_info.terminal.x;
591 }
592
593 /* this gets called once at boot time and only in case of VIS_PIXEL */
594 void
plat_tem_hide_prom_cursor(void)595 plat_tem_hide_prom_cursor(void)
596 {
597 if (boot_console_type(NULL) == CONS_FRAMEBUFFER)
598 boot_fb_cursor(B_FALSE);
599 }
600
601 /*ARGSUSED*/
602 void
plat_tem_get_prom_pos(uint32_t * row,uint32_t * col)603 plat_tem_get_prom_pos(uint32_t *row, uint32_t *col)
604 {
605 *row = fb_info.cursor.pos.y;
606 *col = fb_info.cursor.pos.x;
607 }
608