1 /******************************************************************************
2 SPDX-License-Identifier: BSD-3-Clause
3
4 Copyright (c) 2001-2020, Intel Corporation
5 All rights reserved.
6
7 Redistribution and use in source and binary forms, with or without
8 modification, are permitted provided that the following conditions are met:
9
10 1. Redistributions of source code must retain the above copyright notice,
11 this list of conditions and the following disclaimer.
12
13 2. Redistributions in binary form must reproduce the above copyright
14 notice, this list of conditions and the following disclaimer in the
15 documentation and/or other materials provided with the distribution.
16
17 3. Neither the name of the Intel Corporation nor the names of its
18 contributors may be used to endorse or promote products derived from
19 this software without specific prior written permission.
20
21 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31 POSSIBILITY OF SUCH DAMAGE.
32
33 ******************************************************************************/
34
35 #include "ixgbe_common.h"
36 #include "ixgbe_phy.h"
37 #include "ixgbe_dcb.h"
38 #include "ixgbe_dcb_82599.h"
39 #include "ixgbe_api.h"
40
41 static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
42 static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
43 static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
44 static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
45 static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
46 static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
47 u16 count);
48 static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
49 static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
50 static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
51 static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
52
53 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
54 static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
55 u16 *san_mac_offset);
56 static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
57 u16 words, u16 *data);
58 static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
59 u16 words, u16 *data);
60 static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
61 u16 offset);
62
63 /**
64 * ixgbe_init_ops_generic - Inits function ptrs
65 * @hw: pointer to the hardware structure
66 *
67 * Initialize the function pointers.
68 **/
ixgbe_init_ops_generic(struct ixgbe_hw * hw)69 s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
70 {
71 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
72 struct ixgbe_mac_info *mac = &hw->mac;
73 u32 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
74
75 DEBUGFUNC("ixgbe_init_ops_generic");
76
77 /* EEPROM */
78 eeprom->ops.init_params = ixgbe_init_eeprom_params_generic;
79 /* If EEPROM is valid (bit 8 = 1), use EERD otherwise use bit bang */
80 if (eec & IXGBE_EEC_PRES) {
81 eeprom->ops.read = ixgbe_read_eerd_generic;
82 eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_generic;
83 } else {
84 eeprom->ops.read = ixgbe_read_eeprom_bit_bang_generic;
85 eeprom->ops.read_buffer =
86 ixgbe_read_eeprom_buffer_bit_bang_generic;
87 }
88 eeprom->ops.write = ixgbe_write_eeprom_generic;
89 eeprom->ops.write_buffer = ixgbe_write_eeprom_buffer_bit_bang_generic;
90 eeprom->ops.validate_checksum =
91 ixgbe_validate_eeprom_checksum_generic;
92 eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_generic;
93 eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_generic;
94
95 /* MAC */
96 mac->ops.init_hw = ixgbe_init_hw_generic;
97 mac->ops.reset_hw = NULL;
98 mac->ops.start_hw = ixgbe_start_hw_generic;
99 mac->ops.clear_hw_cntrs = ixgbe_clear_hw_cntrs_generic;
100 mac->ops.get_media_type = NULL;
101 mac->ops.get_supported_physical_layer = NULL;
102 mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_generic;
103 mac->ops.get_mac_addr = ixgbe_get_mac_addr_generic;
104 mac->ops.stop_adapter = ixgbe_stop_adapter_generic;
105 mac->ops.get_bus_info = ixgbe_get_bus_info_generic;
106 mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie;
107 mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync;
108 mac->ops.release_swfw_sync = ixgbe_release_swfw_sync;
109 mac->ops.prot_autoc_read = prot_autoc_read_generic;
110 mac->ops.prot_autoc_write = prot_autoc_write_generic;
111
112 /* LEDs */
113 mac->ops.led_on = ixgbe_led_on_generic;
114 mac->ops.led_off = ixgbe_led_off_generic;
115 mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
116 mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
117 mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic;
118
119 /* RAR, Multicast, VLAN */
120 mac->ops.set_rar = ixgbe_set_rar_generic;
121 mac->ops.clear_rar = ixgbe_clear_rar_generic;
122 mac->ops.insert_mac_addr = NULL;
123 mac->ops.set_vmdq = NULL;
124 mac->ops.clear_vmdq = NULL;
125 mac->ops.init_rx_addrs = ixgbe_init_rx_addrs_generic;
126 mac->ops.update_uc_addr_list = ixgbe_update_uc_addr_list_generic;
127 mac->ops.update_mc_addr_list = ixgbe_update_mc_addr_list_generic;
128 mac->ops.enable_mc = ixgbe_enable_mc_generic;
129 mac->ops.disable_mc = ixgbe_disable_mc_generic;
130 mac->ops.clear_vfta = NULL;
131 mac->ops.set_vfta = NULL;
132 mac->ops.set_vlvf = NULL;
133 mac->ops.init_uta_tables = NULL;
134 mac->ops.enable_rx = ixgbe_enable_rx_generic;
135 mac->ops.disable_rx = ixgbe_disable_rx_generic;
136 mac->ops.toggle_txdctl = ixgbe_toggle_txdctl_generic;
137
138 /* Flow Control */
139 mac->ops.fc_enable = ixgbe_fc_enable_generic;
140 mac->ops.setup_fc = ixgbe_setup_fc_generic;
141 mac->ops.fc_autoneg = ixgbe_fc_autoneg;
142
143 /* Link */
144 mac->ops.get_link_capabilities = NULL;
145 mac->ops.setup_link = NULL;
146 mac->ops.check_link = NULL;
147 mac->ops.dmac_config = NULL;
148 mac->ops.dmac_update_tcs = NULL;
149 mac->ops.dmac_config_tcs = NULL;
150
151 return IXGBE_SUCCESS;
152 }
153
154 /**
155 * ixgbe_device_supports_autoneg_fc - Check if device supports autonegotiation
156 * of flow control
157 * @hw: pointer to hardware structure
158 *
159 * This function returns true if the device supports flow control
160 * autonegotiation, and false if it does not.
161 *
162 **/
ixgbe_device_supports_autoneg_fc(struct ixgbe_hw * hw)163 bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
164 {
165 bool supported = false;
166 ixgbe_link_speed speed;
167 bool link_up;
168
169 DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
170
171 switch (hw->phy.media_type) {
172 case ixgbe_media_type_fiber_fixed:
173 case ixgbe_media_type_fiber_qsfp:
174 case ixgbe_media_type_fiber:
175 /* flow control autoneg block list */
176 switch (hw->device_id) {
177 case IXGBE_DEV_ID_X550EM_A_SFP:
178 case IXGBE_DEV_ID_X550EM_A_SFP_N:
179 case IXGBE_DEV_ID_X550EM_A_QSFP:
180 case IXGBE_DEV_ID_X550EM_A_QSFP_N:
181 supported = false;
182 break;
183 default:
184 hw->mac.ops.check_link(hw, &speed, &link_up, false);
185 /* if link is down, assume supported */
186 if (link_up)
187 supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
188 true : false;
189 else
190 supported = true;
191 }
192
193 break;
194 case ixgbe_media_type_backplane:
195 if (hw->device_id == IXGBE_DEV_ID_X550EM_X_XFI)
196 supported = false;
197 else
198 supported = true;
199 break;
200 case ixgbe_media_type_copper:
201 /* only some copper devices support flow control autoneg */
202 switch (hw->device_id) {
203 case IXGBE_DEV_ID_82599_T3_LOM:
204 case IXGBE_DEV_ID_X540T:
205 case IXGBE_DEV_ID_X540T1:
206 case IXGBE_DEV_ID_X540_BYPASS:
207 case IXGBE_DEV_ID_X550T:
208 case IXGBE_DEV_ID_X550T1:
209 case IXGBE_DEV_ID_X550EM_X_10G_T:
210 case IXGBE_DEV_ID_X550EM_A_10G_T:
211 case IXGBE_DEV_ID_X550EM_A_1G_T:
212 case IXGBE_DEV_ID_X550EM_A_1G_T_L:
213 supported = true;
214 break;
215 default:
216 supported = false;
217 }
218 default:
219 break;
220 }
221
222 if (!supported)
223 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
224 "Device %x does not support flow control autoneg",
225 hw->device_id);
226
227 return supported;
228 }
229
230 /**
231 * ixgbe_setup_fc_generic - Set up flow control
232 * @hw: pointer to hardware structure
233 *
234 * Called at init time to set up flow control.
235 **/
ixgbe_setup_fc_generic(struct ixgbe_hw * hw)236 s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
237 {
238 s32 ret_val = IXGBE_SUCCESS;
239 u32 reg = 0, reg_bp = 0;
240 u16 reg_cu = 0;
241 bool locked = false;
242
243 DEBUGFUNC("ixgbe_setup_fc_generic");
244
245 /* Validate the requested mode */
246 if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
247 ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
248 "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
249 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
250 goto out;
251 }
252
253 /*
254 * 10gig parts do not have a word in the EEPROM to determine the
255 * default flow control setting, so we explicitly set it to full.
256 */
257 if (hw->fc.requested_mode == ixgbe_fc_default)
258 hw->fc.requested_mode = ixgbe_fc_full;
259
260 /*
261 * Set up the 1G and 10G flow control advertisement registers so the
262 * HW will be able to do fc autoneg once the cable is plugged in. If
263 * we link at 10G, the 1G advertisement is harmless and vice versa.
264 */
265 switch (hw->phy.media_type) {
266 case ixgbe_media_type_backplane:
267 /* some MAC's need RMW protection on AUTOC */
268 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, ®_bp);
269 if (ret_val != IXGBE_SUCCESS)
270 goto out;
271
272 reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
273 break;
274 case ixgbe_media_type_fiber_fixed:
275 case ixgbe_media_type_fiber_qsfp:
276 case ixgbe_media_type_fiber:
277 reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
278
279 break;
280 case ixgbe_media_type_copper:
281 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
282 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®_cu);
283 break;
284 default:
285 break;
286 }
287
288 /*
289 * The possible values of fc.requested_mode are:
290 * 0: Flow control is completely disabled
291 * 1: Rx flow control is enabled (we can receive pause frames,
292 * but not send pause frames).
293 * 2: Tx flow control is enabled (we can send pause frames but
294 * we do not support receiving pause frames).
295 * 3: Both Rx and Tx flow control (symmetric) are enabled.
296 * other: Invalid.
297 */
298 switch (hw->fc.requested_mode) {
299 case ixgbe_fc_none:
300 /* Flow control completely disabled by software override. */
301 reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
302 if (hw->phy.media_type == ixgbe_media_type_backplane)
303 reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
304 IXGBE_AUTOC_ASM_PAUSE);
305 else if (hw->phy.media_type == ixgbe_media_type_copper)
306 reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
307 break;
308 case ixgbe_fc_tx_pause:
309 /*
310 * Tx Flow control is enabled, and Rx Flow control is
311 * disabled by software override.
312 */
313 reg |= IXGBE_PCS1GANA_ASM_PAUSE;
314 reg &= ~IXGBE_PCS1GANA_SYM_PAUSE;
315 if (hw->phy.media_type == ixgbe_media_type_backplane) {
316 reg_bp |= IXGBE_AUTOC_ASM_PAUSE;
317 reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE;
318 } else if (hw->phy.media_type == ixgbe_media_type_copper) {
319 reg_cu |= IXGBE_TAF_ASM_PAUSE;
320 reg_cu &= ~IXGBE_TAF_SYM_PAUSE;
321 }
322 break;
323 case ixgbe_fc_rx_pause:
324 /*
325 * Rx Flow control is enabled and Tx Flow control is
326 * disabled by software override. Since there really
327 * isn't a way to advertise that we are capable of RX
328 * Pause ONLY, we will advertise that we support both
329 * symmetric and asymmetric Rx PAUSE, as such we fall
330 * through to the fc_full statement. Later, we will
331 * disable the adapter's ability to send PAUSE frames.
332 */
333 case ixgbe_fc_full:
334 /* Flow control (both Rx and Tx) is enabled by SW override. */
335 reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE;
336 if (hw->phy.media_type == ixgbe_media_type_backplane)
337 reg_bp |= IXGBE_AUTOC_SYM_PAUSE |
338 IXGBE_AUTOC_ASM_PAUSE;
339 else if (hw->phy.media_type == ixgbe_media_type_copper)
340 reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE;
341 break;
342 default:
343 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
344 "Flow control param set incorrectly\n");
345 ret_val = IXGBE_ERR_CONFIG;
346 goto out;
347 break;
348 }
349
350 if (hw->mac.type < ixgbe_mac_X540) {
351 /*
352 * Enable auto-negotiation between the MAC & PHY;
353 * the MAC will advertise clause 37 flow control.
354 */
355 IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
356 reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
357
358 /* Disable AN timeout */
359 if (hw->fc.strict_ieee)
360 reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
361
362 IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
363 DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
364 }
365
366 /*
367 * AUTOC restart handles negotiation of 1G and 10G on backplane
368 * and copper. There is no need to set the PCS1GCTL register.
369 *
370 */
371 if (hw->phy.media_type == ixgbe_media_type_backplane) {
372 reg_bp |= IXGBE_AUTOC_AN_RESTART;
373 ret_val = hw->mac.ops.prot_autoc_write(hw, reg_bp, locked);
374 if (ret_val)
375 goto out;
376 } else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
377 (ixgbe_device_supports_autoneg_fc(hw))) {
378 hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
379 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu);
380 }
381
382 DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg);
383 out:
384 return ret_val;
385 }
386
387 /**
388 * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
389 * @hw: pointer to hardware structure
390 *
391 * Starts the hardware by filling the bus info structure and media type, clears
392 * all on chip counters, initializes receive address registers, multicast
393 * table, VLAN filter table, calls routine to set up link and flow control
394 * settings, and leaves transmit and receive units disabled and uninitialized
395 **/
ixgbe_start_hw_generic(struct ixgbe_hw * hw)396 s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
397 {
398 s32 ret_val;
399 u32 ctrl_ext;
400 u16 device_caps;
401
402 DEBUGFUNC("ixgbe_start_hw_generic");
403
404 /* Set the media type */
405 hw->phy.media_type = hw->mac.ops.get_media_type(hw);
406
407 /* PHY ops initialization must be done in reset_hw() */
408
409 /* Clear the VLAN filter table */
410 hw->mac.ops.clear_vfta(hw);
411
412 /* Clear statistics registers */
413 hw->mac.ops.clear_hw_cntrs(hw);
414
415 /* Set No Snoop Disable */
416 ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
417 ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
418 IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
419 IXGBE_WRITE_FLUSH(hw);
420
421 /* Setup flow control */
422 ret_val = ixgbe_setup_fc(hw);
423 if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED) {
424 DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val);
425 return ret_val;
426 }
427
428 /* Cache bit indicating need for crosstalk fix */
429 switch (hw->mac.type) {
430 case ixgbe_mac_82599EB:
431 case ixgbe_mac_X550EM_x:
432 case ixgbe_mac_X550EM_a:
433 hw->mac.ops.get_device_caps(hw, &device_caps);
434 if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
435 hw->need_crosstalk_fix = false;
436 else
437 hw->need_crosstalk_fix = true;
438 break;
439 default:
440 hw->need_crosstalk_fix = false;
441 break;
442 }
443
444 /* Clear adapter stopped flag */
445 hw->adapter_stopped = false;
446
447 return IXGBE_SUCCESS;
448 }
449
450 /**
451 * ixgbe_start_hw_gen2 - Init sequence for common device family
452 * @hw: pointer to hw structure
453 *
454 * Performs the init sequence common to the second generation
455 * of 10 GbE devices.
456 * Devices in the second generation:
457 * 82599
458 * X540
459 **/
ixgbe_start_hw_gen2(struct ixgbe_hw * hw)460 void ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
461 {
462 u32 i;
463 u32 regval;
464
465 /* Clear the rate limiters */
466 for (i = 0; i < hw->mac.max_tx_queues; i++) {
467 IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
468 IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
469 }
470 IXGBE_WRITE_FLUSH(hw);
471
472 /* Disable relaxed ordering */
473 for (i = 0; i < hw->mac.max_tx_queues; i++) {
474 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
475 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
476 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
477 }
478
479 for (i = 0; i < hw->mac.max_rx_queues; i++) {
480 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
481 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
482 IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
483 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
484 }
485 }
486
487 /**
488 * ixgbe_init_hw_generic - Generic hardware initialization
489 * @hw: pointer to hardware structure
490 *
491 * Initialize the hardware by resetting the hardware, filling the bus info
492 * structure and media type, clears all on chip counters, initializes receive
493 * address registers, multicast table, VLAN filter table, calls routine to set
494 * up link and flow control settings, and leaves transmit and receive units
495 * disabled and uninitialized
496 **/
ixgbe_init_hw_generic(struct ixgbe_hw * hw)497 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
498 {
499 s32 status;
500
501 DEBUGFUNC("ixgbe_init_hw_generic");
502
503 /* Reset the hardware */
504 status = hw->mac.ops.reset_hw(hw);
505
506 if (status == IXGBE_SUCCESS || status == IXGBE_ERR_SFP_NOT_PRESENT) {
507 /* Start the HW */
508 status = hw->mac.ops.start_hw(hw);
509 }
510
511 /* Initialize the LED link active for LED blink support */
512 if (hw->mac.ops.init_led_link_act)
513 hw->mac.ops.init_led_link_act(hw);
514
515 if (status != IXGBE_SUCCESS)
516 DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status);
517
518 return status;
519 }
520
521 /**
522 * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
523 * @hw: pointer to hardware structure
524 *
525 * Clears all hardware statistics counters by reading them from the hardware
526 * Statistics counters are clear on read.
527 **/
ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw * hw)528 s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
529 {
530 u16 i = 0;
531
532 DEBUGFUNC("ixgbe_clear_hw_cntrs_generic");
533
534 IXGBE_READ_REG(hw, IXGBE_CRCERRS);
535 IXGBE_READ_REG(hw, IXGBE_ILLERRC);
536 IXGBE_READ_REG(hw, IXGBE_ERRBC);
537 IXGBE_READ_REG(hw, IXGBE_MSPDC);
538 for (i = 0; i < 8; i++)
539 IXGBE_READ_REG(hw, IXGBE_MPC(i));
540
541 IXGBE_READ_REG(hw, IXGBE_MLFC);
542 IXGBE_READ_REG(hw, IXGBE_MRFC);
543 IXGBE_READ_REG(hw, IXGBE_RLEC);
544 IXGBE_READ_REG(hw, IXGBE_LXONTXC);
545 IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
546 if (hw->mac.type >= ixgbe_mac_82599EB) {
547 IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
548 IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
549 } else {
550 IXGBE_READ_REG(hw, IXGBE_LXONRXC);
551 IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
552 }
553
554 for (i = 0; i < 8; i++) {
555 IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
556 IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
557 if (hw->mac.type >= ixgbe_mac_82599EB) {
558 IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
559 IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
560 } else {
561 IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
562 IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
563 }
564 }
565 if (hw->mac.type >= ixgbe_mac_82599EB)
566 for (i = 0; i < 8; i++)
567 IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
568 IXGBE_READ_REG(hw, IXGBE_PRC64);
569 IXGBE_READ_REG(hw, IXGBE_PRC127);
570 IXGBE_READ_REG(hw, IXGBE_PRC255);
571 IXGBE_READ_REG(hw, IXGBE_PRC511);
572 IXGBE_READ_REG(hw, IXGBE_PRC1023);
573 IXGBE_READ_REG(hw, IXGBE_PRC1522);
574 IXGBE_READ_REG(hw, IXGBE_GPRC);
575 IXGBE_READ_REG(hw, IXGBE_BPRC);
576 IXGBE_READ_REG(hw, IXGBE_MPRC);
577 IXGBE_READ_REG(hw, IXGBE_GPTC);
578 IXGBE_READ_REG(hw, IXGBE_GORCL);
579 IXGBE_READ_REG(hw, IXGBE_GORCH);
580 IXGBE_READ_REG(hw, IXGBE_GOTCL);
581 IXGBE_READ_REG(hw, IXGBE_GOTCH);
582 if (hw->mac.type == ixgbe_mac_82598EB)
583 for (i = 0; i < 8; i++)
584 IXGBE_READ_REG(hw, IXGBE_RNBC(i));
585 IXGBE_READ_REG(hw, IXGBE_RUC);
586 IXGBE_READ_REG(hw, IXGBE_RFC);
587 IXGBE_READ_REG(hw, IXGBE_ROC);
588 IXGBE_READ_REG(hw, IXGBE_RJC);
589 IXGBE_READ_REG(hw, IXGBE_MNGPRC);
590 IXGBE_READ_REG(hw, IXGBE_MNGPDC);
591 IXGBE_READ_REG(hw, IXGBE_MNGPTC);
592 IXGBE_READ_REG(hw, IXGBE_TORL);
593 IXGBE_READ_REG(hw, IXGBE_TORH);
594 IXGBE_READ_REG(hw, IXGBE_TPR);
595 IXGBE_READ_REG(hw, IXGBE_TPT);
596 IXGBE_READ_REG(hw, IXGBE_PTC64);
597 IXGBE_READ_REG(hw, IXGBE_PTC127);
598 IXGBE_READ_REG(hw, IXGBE_PTC255);
599 IXGBE_READ_REG(hw, IXGBE_PTC511);
600 IXGBE_READ_REG(hw, IXGBE_PTC1023);
601 IXGBE_READ_REG(hw, IXGBE_PTC1522);
602 IXGBE_READ_REG(hw, IXGBE_MPTC);
603 IXGBE_READ_REG(hw, IXGBE_BPTC);
604 for (i = 0; i < 16; i++) {
605 IXGBE_READ_REG(hw, IXGBE_QPRC(i));
606 IXGBE_READ_REG(hw, IXGBE_QPTC(i));
607 if (hw->mac.type >= ixgbe_mac_82599EB) {
608 IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
609 IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
610 IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
611 IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
612 IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
613 } else {
614 IXGBE_READ_REG(hw, IXGBE_QBRC(i));
615 IXGBE_READ_REG(hw, IXGBE_QBTC(i));
616 }
617 }
618
619 if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) {
620 if (hw->phy.id == 0)
621 ixgbe_identify_phy(hw);
622 hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL,
623 IXGBE_MDIO_PCS_DEV_TYPE, &i);
624 hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH,
625 IXGBE_MDIO_PCS_DEV_TYPE, &i);
626 hw->phy.ops.read_reg(hw, IXGBE_LDPCECL,
627 IXGBE_MDIO_PCS_DEV_TYPE, &i);
628 hw->phy.ops.read_reg(hw, IXGBE_LDPCECH,
629 IXGBE_MDIO_PCS_DEV_TYPE, &i);
630 }
631
632 return IXGBE_SUCCESS;
633 }
634
635 /**
636 * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
637 * @hw: pointer to hardware structure
638 * @pba_num: stores the part number string from the EEPROM
639 * @pba_num_size: part number string buffer length
640 *
641 * Reads the part number string from the EEPROM.
642 **/
ixgbe_read_pba_string_generic(struct ixgbe_hw * hw,u8 * pba_num,u32 pba_num_size)643 s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
644 u32 pba_num_size)
645 {
646 s32 ret_val;
647 u16 data;
648 u16 pba_ptr;
649 u16 offset;
650 u16 length;
651
652 DEBUGFUNC("ixgbe_read_pba_string_generic");
653
654 if (pba_num == NULL) {
655 DEBUGOUT("PBA string buffer was null\n");
656 return IXGBE_ERR_INVALID_ARGUMENT;
657 }
658
659 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
660 if (ret_val) {
661 DEBUGOUT("NVM Read Error\n");
662 return ret_val;
663 }
664
665 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
666 if (ret_val) {
667 DEBUGOUT("NVM Read Error\n");
668 return ret_val;
669 }
670
671 /*
672 * if data is not ptr guard the PBA must be in legacy format which
673 * means pba_ptr is actually our second data word for the PBA number
674 * and we can decode it into an ascii string
675 */
676 if (data != IXGBE_PBANUM_PTR_GUARD) {
677 DEBUGOUT("NVM PBA number is not stored as string\n");
678
679 /* we will need 11 characters to store the PBA */
680 if (pba_num_size < 11) {
681 DEBUGOUT("PBA string buffer too small\n");
682 return IXGBE_ERR_NO_SPACE;
683 }
684
685 /* extract hex string from data and pba_ptr */
686 pba_num[0] = (data >> 12) & 0xF;
687 pba_num[1] = (data >> 8) & 0xF;
688 pba_num[2] = (data >> 4) & 0xF;
689 pba_num[3] = data & 0xF;
690 pba_num[4] = (pba_ptr >> 12) & 0xF;
691 pba_num[5] = (pba_ptr >> 8) & 0xF;
692 pba_num[6] = '-';
693 pba_num[7] = 0;
694 pba_num[8] = (pba_ptr >> 4) & 0xF;
695 pba_num[9] = pba_ptr & 0xF;
696
697 /* put a null character on the end of our string */
698 pba_num[10] = '\0';
699
700 /* switch all the data but the '-' to hex char */
701 for (offset = 0; offset < 10; offset++) {
702 if (pba_num[offset] < 0xA)
703 pba_num[offset] += '0';
704 else if (pba_num[offset] < 0x10)
705 pba_num[offset] += 'A' - 0xA;
706 }
707
708 return IXGBE_SUCCESS;
709 }
710
711 ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
712 if (ret_val) {
713 DEBUGOUT("NVM Read Error\n");
714 return ret_val;
715 }
716
717 if (length == 0xFFFF || length == 0 || length > hw->eeprom.word_size) {
718 DEBUGOUT("NVM PBA number section invalid length\n");
719 return IXGBE_ERR_PBA_SECTION;
720 }
721
722 /* check if pba_num buffer is big enough */
723 if (pba_num_size < (((u32)length * 2) - 1)) {
724 DEBUGOUT("PBA string buffer too small\n");
725 return IXGBE_ERR_NO_SPACE;
726 }
727
728 /* trim pba length from start of string */
729 pba_ptr++;
730 length--;
731
732 for (offset = 0; offset < length; offset++) {
733 ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
734 if (ret_val) {
735 DEBUGOUT("NVM Read Error\n");
736 return ret_val;
737 }
738 pba_num[offset * 2] = (u8)(data >> 8);
739 pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
740 }
741 pba_num[offset * 2] = '\0';
742
743 return IXGBE_SUCCESS;
744 }
745
746 /**
747 * ixgbe_read_pba_num_generic - Reads part number from EEPROM
748 * @hw: pointer to hardware structure
749 * @pba_num: stores the part number from the EEPROM
750 *
751 * Reads the part number from the EEPROM.
752 **/
ixgbe_read_pba_num_generic(struct ixgbe_hw * hw,u32 * pba_num)753 s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
754 {
755 s32 ret_val;
756 u16 data;
757
758 DEBUGFUNC("ixgbe_read_pba_num_generic");
759
760 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
761 if (ret_val) {
762 DEBUGOUT("NVM Read Error\n");
763 return ret_val;
764 } else if (data == IXGBE_PBANUM_PTR_GUARD) {
765 DEBUGOUT("NVM Not supported\n");
766 return IXGBE_NOT_IMPLEMENTED;
767 }
768 *pba_num = (u32)(data << 16);
769
770 ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
771 if (ret_val) {
772 DEBUGOUT("NVM Read Error\n");
773 return ret_val;
774 }
775 *pba_num |= (u32)data;
776
777 return IXGBE_SUCCESS;
778 }
779
780 /**
781 * ixgbe_read_pba_raw
782 * @hw: pointer to the HW structure
783 * @eeprom_buf: optional pointer to EEPROM image
784 * @eeprom_buf_size: size of EEPROM image in words
785 * @max_pba_block_size: PBA block size limit
786 * @pba: pointer to output PBA structure
787 *
788 * Reads PBA from EEPROM image when eeprom_buf is not NULL.
789 * Reads PBA from physical EEPROM device when eeprom_buf is NULL.
790 *
791 **/
ixgbe_read_pba_raw(struct ixgbe_hw * hw,u16 * eeprom_buf,u32 eeprom_buf_size,u16 max_pba_block_size,struct ixgbe_pba * pba)792 s32 ixgbe_read_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
793 u32 eeprom_buf_size, u16 max_pba_block_size,
794 struct ixgbe_pba *pba)
795 {
796 s32 ret_val;
797 u16 pba_block_size;
798
799 if (pba == NULL)
800 return IXGBE_ERR_PARAM;
801
802 if (eeprom_buf == NULL) {
803 ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
804 &pba->word[0]);
805 if (ret_val)
806 return ret_val;
807 } else {
808 if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
809 pba->word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
810 pba->word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
811 } else {
812 return IXGBE_ERR_PARAM;
813 }
814 }
815
816 if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
817 if (pba->pba_block == NULL)
818 return IXGBE_ERR_PARAM;
819
820 ret_val = ixgbe_get_pba_block_size(hw, eeprom_buf,
821 eeprom_buf_size,
822 &pba_block_size);
823 if (ret_val)
824 return ret_val;
825
826 if (pba_block_size > max_pba_block_size)
827 return IXGBE_ERR_PARAM;
828
829 if (eeprom_buf == NULL) {
830 ret_val = hw->eeprom.ops.read_buffer(hw, pba->word[1],
831 pba_block_size,
832 pba->pba_block);
833 if (ret_val)
834 return ret_val;
835 } else {
836 if (eeprom_buf_size > (u32)(pba->word[1] +
837 pba_block_size)) {
838 memcpy(pba->pba_block,
839 &eeprom_buf[pba->word[1]],
840 pba_block_size * sizeof(u16));
841 } else {
842 return IXGBE_ERR_PARAM;
843 }
844 }
845 }
846
847 return IXGBE_SUCCESS;
848 }
849
850 /**
851 * ixgbe_write_pba_raw
852 * @hw: pointer to the HW structure
853 * @eeprom_buf: optional pointer to EEPROM image
854 * @eeprom_buf_size: size of EEPROM image in words
855 * @pba: pointer to PBA structure
856 *
857 * Writes PBA to EEPROM image when eeprom_buf is not NULL.
858 * Writes PBA to physical EEPROM device when eeprom_buf is NULL.
859 *
860 **/
ixgbe_write_pba_raw(struct ixgbe_hw * hw,u16 * eeprom_buf,u32 eeprom_buf_size,struct ixgbe_pba * pba)861 s32 ixgbe_write_pba_raw(struct ixgbe_hw *hw, u16 *eeprom_buf,
862 u32 eeprom_buf_size, struct ixgbe_pba *pba)
863 {
864 s32 ret_val;
865
866 if (pba == NULL)
867 return IXGBE_ERR_PARAM;
868
869 if (eeprom_buf == NULL) {
870 ret_val = hw->eeprom.ops.write_buffer(hw, IXGBE_PBANUM0_PTR, 2,
871 &pba->word[0]);
872 if (ret_val)
873 return ret_val;
874 } else {
875 if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
876 eeprom_buf[IXGBE_PBANUM0_PTR] = pba->word[0];
877 eeprom_buf[IXGBE_PBANUM1_PTR] = pba->word[1];
878 } else {
879 return IXGBE_ERR_PARAM;
880 }
881 }
882
883 if (pba->word[0] == IXGBE_PBANUM_PTR_GUARD) {
884 if (pba->pba_block == NULL)
885 return IXGBE_ERR_PARAM;
886
887 if (eeprom_buf == NULL) {
888 ret_val = hw->eeprom.ops.write_buffer(hw, pba->word[1],
889 pba->pba_block[0],
890 pba->pba_block);
891 if (ret_val)
892 return ret_val;
893 } else {
894 if (eeprom_buf_size > (u32)(pba->word[1] +
895 pba->pba_block[0])) {
896 memcpy(&eeprom_buf[pba->word[1]],
897 pba->pba_block,
898 pba->pba_block[0] * sizeof(u16));
899 } else {
900 return IXGBE_ERR_PARAM;
901 }
902 }
903 }
904
905 return IXGBE_SUCCESS;
906 }
907
908 /**
909 * ixgbe_get_pba_block_size
910 * @hw: pointer to the HW structure
911 * @eeprom_buf: optional pointer to EEPROM image
912 * @eeprom_buf_size: size of EEPROM image in words
913 * @pba_data_size: pointer to output variable
914 *
915 * Returns the size of the PBA block in words. Function operates on EEPROM
916 * image if the eeprom_buf pointer is not NULL otherwise it accesses physical
917 * EEPROM device.
918 *
919 **/
ixgbe_get_pba_block_size(struct ixgbe_hw * hw,u16 * eeprom_buf,u32 eeprom_buf_size,u16 * pba_block_size)920 s32 ixgbe_get_pba_block_size(struct ixgbe_hw *hw, u16 *eeprom_buf,
921 u32 eeprom_buf_size, u16 *pba_block_size)
922 {
923 s32 ret_val;
924 u16 pba_word[2];
925 u16 length;
926
927 DEBUGFUNC("ixgbe_get_pba_block_size");
928
929 if (eeprom_buf == NULL) {
930 ret_val = hw->eeprom.ops.read_buffer(hw, IXGBE_PBANUM0_PTR, 2,
931 &pba_word[0]);
932 if (ret_val)
933 return ret_val;
934 } else {
935 if (eeprom_buf_size > IXGBE_PBANUM1_PTR) {
936 pba_word[0] = eeprom_buf[IXGBE_PBANUM0_PTR];
937 pba_word[1] = eeprom_buf[IXGBE_PBANUM1_PTR];
938 } else {
939 return IXGBE_ERR_PARAM;
940 }
941 }
942
943 if (pba_word[0] == IXGBE_PBANUM_PTR_GUARD) {
944 if (eeprom_buf == NULL) {
945 ret_val = hw->eeprom.ops.read(hw, pba_word[1] + 0,
946 &length);
947 if (ret_val)
948 return ret_val;
949 } else {
950 if (eeprom_buf_size > pba_word[1])
951 length = eeprom_buf[pba_word[1] + 0];
952 else
953 return IXGBE_ERR_PARAM;
954 }
955
956 if (length == 0xFFFF || length == 0)
957 return IXGBE_ERR_PBA_SECTION;
958 } else {
959 /* PBA number in legacy format, there is no PBA Block. */
960 length = 0;
961 }
962
963 if (pba_block_size != NULL)
964 *pba_block_size = length;
965
966 return IXGBE_SUCCESS;
967 }
968
969 /**
970 * ixgbe_get_mac_addr_generic - Generic get MAC address
971 * @hw: pointer to hardware structure
972 * @mac_addr: Adapter MAC address
973 *
974 * Reads the adapter's MAC address from first Receive Address Register (RAR0)
975 * A reset of the adapter must be performed prior to calling this function
976 * in order for the MAC address to have been loaded from the EEPROM into RAR0
977 **/
ixgbe_get_mac_addr_generic(struct ixgbe_hw * hw,u8 * mac_addr)978 s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
979 {
980 u32 rar_high;
981 u32 rar_low;
982 u16 i;
983
984 DEBUGFUNC("ixgbe_get_mac_addr_generic");
985
986 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
987 rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
988
989 for (i = 0; i < 4; i++)
990 mac_addr[i] = (u8)(rar_low >> (i*8));
991
992 for (i = 0; i < 2; i++)
993 mac_addr[i+4] = (u8)(rar_high >> (i*8));
994
995 return IXGBE_SUCCESS;
996 }
997
998 /**
999 * ixgbe_set_pci_config_data_generic - Generic store PCI bus info
1000 * @hw: pointer to hardware structure
1001 * @link_status: the link status returned by the PCI config space
1002 *
1003 * Stores the PCI bus info (speed, width, type) within the ixgbe_hw structure
1004 **/
ixgbe_set_pci_config_data_generic(struct ixgbe_hw * hw,u16 link_status)1005 void ixgbe_set_pci_config_data_generic(struct ixgbe_hw *hw, u16 link_status)
1006 {
1007 struct ixgbe_mac_info *mac = &hw->mac;
1008
1009 if (hw->bus.type == ixgbe_bus_type_unknown)
1010 hw->bus.type = ixgbe_bus_type_pci_express;
1011
1012 switch (link_status & IXGBE_PCI_LINK_WIDTH) {
1013 case IXGBE_PCI_LINK_WIDTH_1:
1014 hw->bus.width = ixgbe_bus_width_pcie_x1;
1015 break;
1016 case IXGBE_PCI_LINK_WIDTH_2:
1017 hw->bus.width = ixgbe_bus_width_pcie_x2;
1018 break;
1019 case IXGBE_PCI_LINK_WIDTH_4:
1020 hw->bus.width = ixgbe_bus_width_pcie_x4;
1021 break;
1022 case IXGBE_PCI_LINK_WIDTH_8:
1023 hw->bus.width = ixgbe_bus_width_pcie_x8;
1024 break;
1025 default:
1026 hw->bus.width = ixgbe_bus_width_unknown;
1027 break;
1028 }
1029
1030 switch (link_status & IXGBE_PCI_LINK_SPEED) {
1031 case IXGBE_PCI_LINK_SPEED_2500:
1032 hw->bus.speed = ixgbe_bus_speed_2500;
1033 break;
1034 case IXGBE_PCI_LINK_SPEED_5000:
1035 hw->bus.speed = ixgbe_bus_speed_5000;
1036 break;
1037 case IXGBE_PCI_LINK_SPEED_8000:
1038 hw->bus.speed = ixgbe_bus_speed_8000;
1039 break;
1040 default:
1041 hw->bus.speed = ixgbe_bus_speed_unknown;
1042 break;
1043 }
1044
1045 mac->ops.set_lan_id(hw);
1046 }
1047
1048 /**
1049 * ixgbe_get_bus_info_generic - Generic set PCI bus info
1050 * @hw: pointer to hardware structure
1051 *
1052 * Gets the PCI bus info (speed, width, type) then calls helper function to
1053 * store this data within the ixgbe_hw structure.
1054 **/
ixgbe_get_bus_info_generic(struct ixgbe_hw * hw)1055 s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
1056 {
1057 u16 link_status;
1058
1059 DEBUGFUNC("ixgbe_get_bus_info_generic");
1060
1061 /* Get the negotiated link width and speed from PCI config space */
1062 link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS);
1063
1064 ixgbe_set_pci_config_data_generic(hw, link_status);
1065
1066 return IXGBE_SUCCESS;
1067 }
1068
1069 /**
1070 * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
1071 * @hw: pointer to the HW structure
1072 *
1073 * Determines the LAN function id by reading memory-mapped registers and swaps
1074 * the port value if requested, and set MAC instance for devices that share
1075 * CS4227.
1076 **/
ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw * hw)1077 void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
1078 {
1079 struct ixgbe_bus_info *bus = &hw->bus;
1080 u32 reg;
1081 u16 ee_ctrl_4;
1082
1083 DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie");
1084
1085 reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
1086 bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
1087 bus->lan_id = (u8)bus->func;
1088
1089 /* check for a port swap */
1090 reg = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
1091 if (reg & IXGBE_FACTPS_LFS)
1092 bus->func ^= 0x1;
1093
1094 /* Get MAC instance from EEPROM for configuring CS4227 */
1095 if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
1096 hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
1097 bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
1098 IXGBE_EE_CTRL_4_INST_ID_SHIFT;
1099 }
1100 }
1101
1102 /**
1103 * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
1104 * @hw: pointer to hardware structure
1105 *
1106 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
1107 * disables transmit and receive units. The adapter_stopped flag is used by
1108 * the shared code and drivers to determine if the adapter is in a stopped
1109 * state and should not touch the hardware.
1110 **/
ixgbe_stop_adapter_generic(struct ixgbe_hw * hw)1111 s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
1112 {
1113 u32 reg_val;
1114 u16 i;
1115
1116 DEBUGFUNC("ixgbe_stop_adapter_generic");
1117
1118 /*
1119 * Set the adapter_stopped flag so other driver functions stop touching
1120 * the hardware
1121 */
1122 hw->adapter_stopped = true;
1123
1124 /* Disable the receive unit */
1125 ixgbe_disable_rx(hw);
1126
1127 /* Clear interrupt mask to stop interrupts from being generated */
1128 IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
1129
1130 /* Clear any pending interrupts, flush previous writes */
1131 IXGBE_READ_REG(hw, IXGBE_EICR);
1132
1133 /* Disable the transmit unit. Each queue must be disabled. */
1134 for (i = 0; i < hw->mac.max_tx_queues; i++)
1135 IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH);
1136
1137 /* Disable the receive unit by stopping each queue */
1138 for (i = 0; i < hw->mac.max_rx_queues; i++) {
1139 reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
1140 reg_val &= ~IXGBE_RXDCTL_ENABLE;
1141 reg_val |= IXGBE_RXDCTL_SWFLSH;
1142 IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
1143 }
1144
1145 /* flush all queues disables */
1146 IXGBE_WRITE_FLUSH(hw);
1147 msec_delay(2);
1148
1149 /*
1150 * Prevent the PCI-E bus from hanging by disabling PCI-E primary
1151 * access and verify no pending requests
1152 */
1153 return ixgbe_disable_pcie_primary(hw);
1154 }
1155
1156 /**
1157 * ixgbe_init_led_link_act_generic - Store the LED index link/activity.
1158 * @hw: pointer to hardware structure
1159 *
1160 * Store the index for the link active LED. This will be used to support
1161 * blinking the LED.
1162 **/
ixgbe_init_led_link_act_generic(struct ixgbe_hw * hw)1163 s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
1164 {
1165 struct ixgbe_mac_info *mac = &hw->mac;
1166 u32 led_reg, led_mode;
1167 u8 i;
1168
1169 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
1170
1171 /* Get LED link active from the LEDCTL register */
1172 for (i = 0; i < 4; i++) {
1173 led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
1174
1175 if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
1176 IXGBE_LED_LINK_ACTIVE) {
1177 mac->led_link_act = i;
1178 return IXGBE_SUCCESS;
1179 }
1180 }
1181
1182 /*
1183 * If LEDCTL register does not have the LED link active set, then use
1184 * known MAC defaults.
1185 */
1186 switch (hw->mac.type) {
1187 case ixgbe_mac_X550EM_a:
1188 case ixgbe_mac_X550EM_x:
1189 mac->led_link_act = 1;
1190 break;
1191 default:
1192 mac->led_link_act = 2;
1193 }
1194 return IXGBE_SUCCESS;
1195 }
1196
1197 /**
1198 * ixgbe_led_on_generic - Turns on the software controllable LEDs.
1199 * @hw: pointer to hardware structure
1200 * @index: led number to turn on
1201 **/
ixgbe_led_on_generic(struct ixgbe_hw * hw,u32 index)1202 s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
1203 {
1204 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
1205
1206 DEBUGFUNC("ixgbe_led_on_generic");
1207
1208 if (index > 3)
1209 return IXGBE_ERR_PARAM;
1210
1211 /* To turn on the LED, set mode to ON. */
1212 led_reg &= ~IXGBE_LED_MODE_MASK(index);
1213 led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
1214 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
1215 IXGBE_WRITE_FLUSH(hw);
1216
1217 return IXGBE_SUCCESS;
1218 }
1219
1220 /**
1221 * ixgbe_led_off_generic - Turns off the software controllable LEDs.
1222 * @hw: pointer to hardware structure
1223 * @index: led number to turn off
1224 **/
ixgbe_led_off_generic(struct ixgbe_hw * hw,u32 index)1225 s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
1226 {
1227 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
1228
1229 DEBUGFUNC("ixgbe_led_off_generic");
1230
1231 if (index > 3)
1232 return IXGBE_ERR_PARAM;
1233
1234 /* To turn off the LED, set mode to OFF. */
1235 led_reg &= ~IXGBE_LED_MODE_MASK(index);
1236 led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
1237 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
1238 IXGBE_WRITE_FLUSH(hw);
1239
1240 return IXGBE_SUCCESS;
1241 }
1242
1243 /**
1244 * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
1245 * @hw: pointer to hardware structure
1246 *
1247 * Initializes the EEPROM parameters ixgbe_eeprom_info within the
1248 * ixgbe_hw struct in order to set up EEPROM access.
1249 **/
ixgbe_init_eeprom_params_generic(struct ixgbe_hw * hw)1250 s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
1251 {
1252 struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
1253 u32 eec;
1254 u16 eeprom_size;
1255
1256 DEBUGFUNC("ixgbe_init_eeprom_params_generic");
1257
1258 if (eeprom->type == ixgbe_eeprom_uninitialized) {
1259 eeprom->type = ixgbe_eeprom_none;
1260 /* Set default semaphore delay to 10ms which is a well
1261 * tested value */
1262 eeprom->semaphore_delay = 10;
1263 /* Clear EEPROM page size, it will be initialized as needed */
1264 eeprom->word_page_size = 0;
1265
1266 /*
1267 * Check for EEPROM present first.
1268 * If not present leave as none
1269 */
1270 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
1271 if (eec & IXGBE_EEC_PRES) {
1272 eeprom->type = ixgbe_eeprom_spi;
1273
1274 /*
1275 * SPI EEPROM is assumed here. This code would need to
1276 * change if a future EEPROM is not SPI.
1277 */
1278 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
1279 IXGBE_EEC_SIZE_SHIFT);
1280 eeprom->word_size = 1 << (eeprom_size +
1281 IXGBE_EEPROM_WORD_SIZE_SHIFT);
1282 }
1283
1284 if (eec & IXGBE_EEC_ADDR_SIZE)
1285 eeprom->address_bits = 16;
1286 else
1287 eeprom->address_bits = 8;
1288 DEBUGOUT3("Eeprom params: type = %d, size = %d, address bits: "
1289 "%d\n", eeprom->type, eeprom->word_size,
1290 eeprom->address_bits);
1291 }
1292
1293 return IXGBE_SUCCESS;
1294 }
1295
1296 /**
1297 * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
1298 * @hw: pointer to hardware structure
1299 * @offset: offset within the EEPROM to write
1300 * @words: number of word(s)
1301 * @data: 16 bit word(s) to write to EEPROM
1302 *
1303 * Reads 16 bit word(s) from EEPROM through bit-bang method
1304 **/
ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1305 s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
1306 u16 words, u16 *data)
1307 {
1308 s32 status = IXGBE_SUCCESS;
1309 u16 i, count;
1310
1311 DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang_generic");
1312
1313 hw->eeprom.ops.init_params(hw);
1314
1315 if (words == 0) {
1316 status = IXGBE_ERR_INVALID_ARGUMENT;
1317 goto out;
1318 }
1319
1320 if (offset + words > hw->eeprom.word_size) {
1321 status = IXGBE_ERR_EEPROM;
1322 goto out;
1323 }
1324
1325 /*
1326 * The EEPROM page size cannot be queried from the chip. We do lazy
1327 * initialization. It is worth to do that when we write large buffer.
1328 */
1329 if ((hw->eeprom.word_page_size == 0) &&
1330 (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
1331 ixgbe_detect_eeprom_page_size_generic(hw, offset);
1332
1333 /*
1334 * We cannot hold synchronization semaphores for too long
1335 * to avoid other entity starvation. However it is more efficient
1336 * to read in bursts than synchronizing access for each word.
1337 */
1338 for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
1339 count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
1340 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
1341 status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
1342 count, &data[i]);
1343
1344 if (status != IXGBE_SUCCESS)
1345 break;
1346 }
1347
1348 out:
1349 return status;
1350 }
1351
1352 /**
1353 * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
1354 * @hw: pointer to hardware structure
1355 * @offset: offset within the EEPROM to be written to
1356 * @words: number of word(s)
1357 * @data: 16 bit word(s) to be written to the EEPROM
1358 *
1359 * If ixgbe_eeprom_update_checksum is not called after this function, the
1360 * EEPROM will most likely contain an invalid checksum.
1361 **/
ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1362 static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
1363 u16 words, u16 *data)
1364 {
1365 s32 status;
1366 u16 word;
1367 u16 page_size;
1368 u16 i;
1369 u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
1370
1371 DEBUGFUNC("ixgbe_write_eeprom_buffer_bit_bang");
1372
1373 /* Prepare the EEPROM for writing */
1374 status = ixgbe_acquire_eeprom(hw);
1375
1376 if (status == IXGBE_SUCCESS) {
1377 if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
1378 ixgbe_release_eeprom(hw);
1379 status = IXGBE_ERR_EEPROM;
1380 }
1381 }
1382
1383 if (status == IXGBE_SUCCESS) {
1384 for (i = 0; i < words; i++) {
1385 ixgbe_standby_eeprom(hw);
1386
1387 /* Send the WRITE ENABLE command (8 bit opcode ) */
1388 ixgbe_shift_out_eeprom_bits(hw,
1389 IXGBE_EEPROM_WREN_OPCODE_SPI,
1390 IXGBE_EEPROM_OPCODE_BITS);
1391
1392 ixgbe_standby_eeprom(hw);
1393
1394 /*
1395 * Some SPI eeproms use the 8th address bit embedded
1396 * in the opcode
1397 */
1398 if ((hw->eeprom.address_bits == 8) &&
1399 ((offset + i) >= 128))
1400 write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
1401
1402 /* Send the Write command (8-bit opcode + addr) */
1403 ixgbe_shift_out_eeprom_bits(hw, write_opcode,
1404 IXGBE_EEPROM_OPCODE_BITS);
1405 ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
1406 hw->eeprom.address_bits);
1407
1408 page_size = hw->eeprom.word_page_size;
1409
1410 /* Send the data in burst via SPI*/
1411 do {
1412 word = data[i];
1413 word = (word >> 8) | (word << 8);
1414 ixgbe_shift_out_eeprom_bits(hw, word, 16);
1415
1416 if (page_size == 0)
1417 break;
1418
1419 /* do not wrap around page */
1420 if (((offset + i) & (page_size - 1)) ==
1421 (page_size - 1))
1422 break;
1423 } while (++i < words);
1424
1425 ixgbe_standby_eeprom(hw);
1426 msec_delay(10);
1427 }
1428 /* Done with writing - release the EEPROM */
1429 ixgbe_release_eeprom(hw);
1430 }
1431
1432 return status;
1433 }
1434
1435 /**
1436 * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
1437 * @hw: pointer to hardware structure
1438 * @offset: offset within the EEPROM to be written to
1439 * @data: 16 bit word to be written to the EEPROM
1440 *
1441 * If ixgbe_eeprom_update_checksum is not called after this function, the
1442 * EEPROM will most likely contain an invalid checksum.
1443 **/
ixgbe_write_eeprom_generic(struct ixgbe_hw * hw,u16 offset,u16 data)1444 s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
1445 {
1446 s32 status;
1447
1448 DEBUGFUNC("ixgbe_write_eeprom_generic");
1449
1450 hw->eeprom.ops.init_params(hw);
1451
1452 if (offset >= hw->eeprom.word_size) {
1453 status = IXGBE_ERR_EEPROM;
1454 goto out;
1455 }
1456
1457 status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
1458
1459 out:
1460 return status;
1461 }
1462
1463 /**
1464 * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
1465 * @hw: pointer to hardware structure
1466 * @offset: offset within the EEPROM to be read
1467 * @data: read 16 bit words(s) from EEPROM
1468 * @words: number of word(s)
1469 *
1470 * Reads 16 bit word(s) from EEPROM through bit-bang method
1471 **/
ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1472 s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
1473 u16 words, u16 *data)
1474 {
1475 s32 status = IXGBE_SUCCESS;
1476 u16 i, count;
1477
1478 DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang_generic");
1479
1480 hw->eeprom.ops.init_params(hw);
1481
1482 if (words == 0) {
1483 status = IXGBE_ERR_INVALID_ARGUMENT;
1484 goto out;
1485 }
1486
1487 if (offset + words > hw->eeprom.word_size) {
1488 status = IXGBE_ERR_EEPROM;
1489 goto out;
1490 }
1491
1492 /*
1493 * We cannot hold synchronization semaphores for too long
1494 * to avoid other entity starvation. However it is more efficient
1495 * to read in bursts than synchronizing access for each word.
1496 */
1497 for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
1498 count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
1499 IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
1500
1501 status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
1502 count, &data[i]);
1503
1504 if (status != IXGBE_SUCCESS)
1505 break;
1506 }
1507
1508 out:
1509 return status;
1510 }
1511
1512 /**
1513 * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
1514 * @hw: pointer to hardware structure
1515 * @offset: offset within the EEPROM to be read
1516 * @words: number of word(s)
1517 * @data: read 16 bit word(s) from EEPROM
1518 *
1519 * Reads 16 bit word(s) from EEPROM through bit-bang method
1520 **/
ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1521 static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
1522 u16 words, u16 *data)
1523 {
1524 s32 status;
1525 u16 word_in;
1526 u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
1527 u16 i;
1528
1529 DEBUGFUNC("ixgbe_read_eeprom_buffer_bit_bang");
1530
1531 /* Prepare the EEPROM for reading */
1532 status = ixgbe_acquire_eeprom(hw);
1533
1534 if (status == IXGBE_SUCCESS) {
1535 if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
1536 ixgbe_release_eeprom(hw);
1537 status = IXGBE_ERR_EEPROM;
1538 }
1539 }
1540
1541 if (status == IXGBE_SUCCESS) {
1542 for (i = 0; i < words; i++) {
1543 ixgbe_standby_eeprom(hw);
1544 /*
1545 * Some SPI eeproms use the 8th address bit embedded
1546 * in the opcode
1547 */
1548 if ((hw->eeprom.address_bits == 8) &&
1549 ((offset + i) >= 128))
1550 read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
1551
1552 /* Send the READ command (opcode + addr) */
1553 ixgbe_shift_out_eeprom_bits(hw, read_opcode,
1554 IXGBE_EEPROM_OPCODE_BITS);
1555 ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
1556 hw->eeprom.address_bits);
1557
1558 /* Read the data. */
1559 word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
1560 data[i] = (word_in >> 8) | (word_in << 8);
1561 }
1562
1563 /* End this read operation */
1564 ixgbe_release_eeprom(hw);
1565 }
1566
1567 return status;
1568 }
1569
1570 /**
1571 * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
1572 * @hw: pointer to hardware structure
1573 * @offset: offset within the EEPROM to be read
1574 * @data: read 16 bit value from EEPROM
1575 *
1576 * Reads 16 bit value from EEPROM through bit-bang method
1577 **/
ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw * hw,u16 offset,u16 * data)1578 s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
1579 u16 *data)
1580 {
1581 s32 status;
1582
1583 DEBUGFUNC("ixgbe_read_eeprom_bit_bang_generic");
1584
1585 hw->eeprom.ops.init_params(hw);
1586
1587 if (offset >= hw->eeprom.word_size) {
1588 status = IXGBE_ERR_EEPROM;
1589 goto out;
1590 }
1591
1592 status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
1593
1594 out:
1595 return status;
1596 }
1597
1598 /**
1599 * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
1600 * @hw: pointer to hardware structure
1601 * @offset: offset of word in the EEPROM to read
1602 * @words: number of word(s)
1603 * @data: 16 bit word(s) from the EEPROM
1604 *
1605 * Reads a 16 bit word(s) from the EEPROM using the EERD register.
1606 **/
ixgbe_read_eerd_buffer_generic(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1607 s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
1608 u16 words, u16 *data)
1609 {
1610 u32 eerd;
1611 s32 status = IXGBE_SUCCESS;
1612 u32 i;
1613
1614 DEBUGFUNC("ixgbe_read_eerd_buffer_generic");
1615
1616 hw->eeprom.ops.init_params(hw);
1617
1618 if (words == 0) {
1619 status = IXGBE_ERR_INVALID_ARGUMENT;
1620 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
1621 goto out;
1622 }
1623
1624 if (offset >= hw->eeprom.word_size) {
1625 status = IXGBE_ERR_EEPROM;
1626 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
1627 goto out;
1628 }
1629
1630 for (i = 0; i < words; i++) {
1631 eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
1632 IXGBE_EEPROM_RW_REG_START;
1633
1634 IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
1635 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
1636
1637 if (status == IXGBE_SUCCESS) {
1638 data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
1639 IXGBE_EEPROM_RW_REG_DATA);
1640 } else {
1641 DEBUGOUT("Eeprom read timed out\n");
1642 goto out;
1643 }
1644 }
1645 out:
1646 return status;
1647 }
1648
1649 /**
1650 * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
1651 * @hw: pointer to hardware structure
1652 * @offset: offset within the EEPROM to be used as a scratch pad
1653 *
1654 * Discover EEPROM page size by writing marching data at given offset.
1655 * This function is called only when we are writing a new large buffer
1656 * at given offset so the data would be overwritten anyway.
1657 **/
ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw * hw,u16 offset)1658 static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
1659 u16 offset)
1660 {
1661 u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
1662 s32 status = IXGBE_SUCCESS;
1663 u16 i;
1664
1665 DEBUGFUNC("ixgbe_detect_eeprom_page_size_generic");
1666
1667 for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
1668 data[i] = i;
1669
1670 hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
1671 status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
1672 IXGBE_EEPROM_PAGE_SIZE_MAX, data);
1673 hw->eeprom.word_page_size = 0;
1674 if (status != IXGBE_SUCCESS)
1675 goto out;
1676
1677 status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
1678 if (status != IXGBE_SUCCESS)
1679 goto out;
1680
1681 /*
1682 * When writing in burst more than the actual page size
1683 * EEPROM address wraps around current page.
1684 */
1685 hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
1686
1687 DEBUGOUT1("Detected EEPROM page size = %d words.",
1688 hw->eeprom.word_page_size);
1689 out:
1690 return status;
1691 }
1692
1693 /**
1694 * ixgbe_read_eerd_generic - Read EEPROM word using EERD
1695 * @hw: pointer to hardware structure
1696 * @offset: offset of word in the EEPROM to read
1697 * @data: word read from the EEPROM
1698 *
1699 * Reads a 16 bit word from the EEPROM using the EERD register.
1700 **/
ixgbe_read_eerd_generic(struct ixgbe_hw * hw,u16 offset,u16 * data)1701 s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
1702 {
1703 return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
1704 }
1705
1706 /**
1707 * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
1708 * @hw: pointer to hardware structure
1709 * @offset: offset of word in the EEPROM to write
1710 * @words: number of word(s)
1711 * @data: word(s) write to the EEPROM
1712 *
1713 * Write a 16 bit word(s) to the EEPROM using the EEWR register.
1714 **/
ixgbe_write_eewr_buffer_generic(struct ixgbe_hw * hw,u16 offset,u16 words,u16 * data)1715 s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
1716 u16 words, u16 *data)
1717 {
1718 u32 eewr;
1719 s32 status = IXGBE_SUCCESS;
1720 u16 i;
1721
1722 DEBUGFUNC("ixgbe_write_eewr_generic");
1723
1724 hw->eeprom.ops.init_params(hw);
1725
1726 if (words == 0) {
1727 status = IXGBE_ERR_INVALID_ARGUMENT;
1728 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words");
1729 goto out;
1730 }
1731
1732 if (offset >= hw->eeprom.word_size) {
1733 status = IXGBE_ERR_EEPROM;
1734 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset");
1735 goto out;
1736 }
1737
1738 for (i = 0; i < words; i++) {
1739 eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
1740 (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
1741 IXGBE_EEPROM_RW_REG_START;
1742
1743 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
1744 if (status != IXGBE_SUCCESS) {
1745 DEBUGOUT("Eeprom write EEWR timed out\n");
1746 goto out;
1747 }
1748
1749 IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
1750
1751 status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
1752 if (status != IXGBE_SUCCESS) {
1753 DEBUGOUT("Eeprom write EEWR timed out\n");
1754 goto out;
1755 }
1756 }
1757
1758 out:
1759 return status;
1760 }
1761
1762 /**
1763 * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
1764 * @hw: pointer to hardware structure
1765 * @offset: offset of word in the EEPROM to write
1766 * @data: word write to the EEPROM
1767 *
1768 * Write a 16 bit word to the EEPROM using the EEWR register.
1769 **/
ixgbe_write_eewr_generic(struct ixgbe_hw * hw,u16 offset,u16 data)1770 s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
1771 {
1772 return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
1773 }
1774
1775 /**
1776 * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
1777 * @hw: pointer to hardware structure
1778 * @ee_reg: EEPROM flag for polling
1779 *
1780 * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
1781 * read or write is done respectively.
1782 **/
ixgbe_poll_eerd_eewr_done(struct ixgbe_hw * hw,u32 ee_reg)1783 s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
1784 {
1785 u32 i;
1786 u32 reg;
1787 s32 status = IXGBE_ERR_EEPROM;
1788
1789 DEBUGFUNC("ixgbe_poll_eerd_eewr_done");
1790
1791 for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
1792 if (ee_reg == IXGBE_NVM_POLL_READ)
1793 reg = IXGBE_READ_REG(hw, IXGBE_EERD);
1794 else
1795 reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
1796
1797 if (reg & IXGBE_EEPROM_RW_REG_DONE) {
1798 status = IXGBE_SUCCESS;
1799 break;
1800 }
1801 usec_delay(5);
1802 }
1803
1804 if (i == IXGBE_EERD_EEWR_ATTEMPTS)
1805 ERROR_REPORT1(IXGBE_ERROR_POLLING,
1806 "EEPROM read/write done polling timed out");
1807
1808 return status;
1809 }
1810
1811 /**
1812 * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
1813 * @hw: pointer to hardware structure
1814 *
1815 * Prepares EEPROM for access using bit-bang method. This function should
1816 * be called before issuing a command to the EEPROM.
1817 **/
ixgbe_acquire_eeprom(struct ixgbe_hw * hw)1818 static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
1819 {
1820 s32 status = IXGBE_SUCCESS;
1821 u32 eec;
1822 u32 i;
1823
1824 DEBUGFUNC("ixgbe_acquire_eeprom");
1825
1826 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)
1827 != IXGBE_SUCCESS)
1828 status = IXGBE_ERR_SWFW_SYNC;
1829
1830 if (status == IXGBE_SUCCESS) {
1831 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
1832
1833 /* Request EEPROM Access */
1834 eec |= IXGBE_EEC_REQ;
1835 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
1836
1837 for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
1838 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
1839 if (eec & IXGBE_EEC_GNT)
1840 break;
1841 usec_delay(5);
1842 }
1843
1844 /* Release if grant not acquired */
1845 if (!(eec & IXGBE_EEC_GNT)) {
1846 eec &= ~IXGBE_EEC_REQ;
1847 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
1848 DEBUGOUT("Could not acquire EEPROM grant\n");
1849
1850 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
1851 status = IXGBE_ERR_EEPROM;
1852 }
1853
1854 /* Setup EEPROM for Read/Write */
1855 if (status == IXGBE_SUCCESS) {
1856 /* Clear CS and SK */
1857 eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
1858 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
1859 IXGBE_WRITE_FLUSH(hw);
1860 usec_delay(1);
1861 }
1862 }
1863 return status;
1864 }
1865
1866 /**
1867 * ixgbe_get_eeprom_semaphore - Get hardware semaphore
1868 * @hw: pointer to hardware structure
1869 *
1870 * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
1871 **/
ixgbe_get_eeprom_semaphore(struct ixgbe_hw * hw)1872 static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
1873 {
1874 s32 status = IXGBE_ERR_EEPROM;
1875 u32 timeout = 2000;
1876 u32 i;
1877 u32 swsm;
1878
1879 DEBUGFUNC("ixgbe_get_eeprom_semaphore");
1880
1881
1882 /* Get SMBI software semaphore between device drivers first */
1883 for (i = 0; i < timeout; i++) {
1884 /*
1885 * If the SMBI bit is 0 when we read it, then the bit will be
1886 * set and we have the semaphore
1887 */
1888 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
1889 if (!(swsm & IXGBE_SWSM_SMBI)) {
1890 status = IXGBE_SUCCESS;
1891 break;
1892 }
1893 usec_delay(50);
1894 }
1895
1896 if (i == timeout) {
1897 DEBUGOUT("Driver can't access the Eeprom - SMBI Semaphore "
1898 "not granted.\n");
1899 /*
1900 * this release is particularly important because our attempts
1901 * above to get the semaphore may have succeeded, and if there
1902 * was a timeout, we should unconditionally clear the semaphore
1903 * bits to free the driver to make progress
1904 */
1905 ixgbe_release_eeprom_semaphore(hw);
1906
1907 usec_delay(50);
1908 /*
1909 * one last try
1910 * If the SMBI bit is 0 when we read it, then the bit will be
1911 * set and we have the semaphore
1912 */
1913 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
1914 if (!(swsm & IXGBE_SWSM_SMBI))
1915 status = IXGBE_SUCCESS;
1916 }
1917
1918 /* Now get the semaphore between SW/FW through the SWESMBI bit */
1919 if (status == IXGBE_SUCCESS) {
1920 for (i = 0; i < timeout; i++) {
1921 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
1922
1923 /* Set the SW EEPROM semaphore bit to request access */
1924 swsm |= IXGBE_SWSM_SWESMBI;
1925 IXGBE_WRITE_REG(hw, IXGBE_SWSM_BY_MAC(hw), swsm);
1926
1927 /*
1928 * If we set the bit successfully then we got the
1929 * semaphore.
1930 */
1931 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
1932 if (swsm & IXGBE_SWSM_SWESMBI)
1933 break;
1934
1935 usec_delay(50);
1936 }
1937
1938 /*
1939 * Release semaphores and return error if SW EEPROM semaphore
1940 * was not granted because we don't have access to the EEPROM
1941 */
1942 if (i >= timeout) {
1943 ERROR_REPORT1(IXGBE_ERROR_POLLING,
1944 "SWESMBI Software EEPROM semaphore not granted.\n");
1945 ixgbe_release_eeprom_semaphore(hw);
1946 status = IXGBE_ERR_EEPROM;
1947 }
1948 } else {
1949 ERROR_REPORT1(IXGBE_ERROR_POLLING,
1950 "Software semaphore SMBI between device drivers "
1951 "not granted.\n");
1952 }
1953
1954 return status;
1955 }
1956
1957 /**
1958 * ixgbe_release_eeprom_semaphore - Release hardware semaphore
1959 * @hw: pointer to hardware structure
1960 *
1961 * This function clears hardware semaphore bits.
1962 **/
ixgbe_release_eeprom_semaphore(struct ixgbe_hw * hw)1963 static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
1964 {
1965 u32 swsm;
1966
1967 DEBUGFUNC("ixgbe_release_eeprom_semaphore");
1968
1969 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
1970
1971 /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
1972 swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
1973 IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
1974 IXGBE_WRITE_FLUSH(hw);
1975 }
1976
1977 /**
1978 * ixgbe_ready_eeprom - Polls for EEPROM ready
1979 * @hw: pointer to hardware structure
1980 **/
ixgbe_ready_eeprom(struct ixgbe_hw * hw)1981 static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
1982 {
1983 s32 status = IXGBE_SUCCESS;
1984 u16 i;
1985 u8 spi_stat_reg;
1986
1987 DEBUGFUNC("ixgbe_ready_eeprom");
1988
1989 /*
1990 * Read "Status Register" repeatedly until the LSB is cleared. The
1991 * EEPROM will signal that the command has been completed by clearing
1992 * bit 0 of the internal status register. If it's not cleared within
1993 * 5 milliseconds, then error out.
1994 */
1995 for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
1996 ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
1997 IXGBE_EEPROM_OPCODE_BITS);
1998 spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
1999 if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
2000 break;
2001
2002 usec_delay(5);
2003 ixgbe_standby_eeprom(hw);
2004 }
2005
2006 /*
2007 * On some parts, SPI write time could vary from 0-20mSec on 3.3V
2008 * devices (and only 0-5mSec on 5V devices)
2009 */
2010 if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
2011 DEBUGOUT("SPI EEPROM Status error\n");
2012 status = IXGBE_ERR_EEPROM;
2013 }
2014
2015 return status;
2016 }
2017
2018 /**
2019 * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
2020 * @hw: pointer to hardware structure
2021 **/
ixgbe_standby_eeprom(struct ixgbe_hw * hw)2022 static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
2023 {
2024 u32 eec;
2025
2026 DEBUGFUNC("ixgbe_standby_eeprom");
2027
2028 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
2029
2030 /* Toggle CS to flush commands */
2031 eec |= IXGBE_EEC_CS;
2032 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2033 IXGBE_WRITE_FLUSH(hw);
2034 usec_delay(1);
2035 eec &= ~IXGBE_EEC_CS;
2036 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2037 IXGBE_WRITE_FLUSH(hw);
2038 usec_delay(1);
2039 }
2040
2041 /**
2042 * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
2043 * @hw: pointer to hardware structure
2044 * @data: data to send to the EEPROM
2045 * @count: number of bits to shift out
2046 **/
ixgbe_shift_out_eeprom_bits(struct ixgbe_hw * hw,u16 data,u16 count)2047 static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
2048 u16 count)
2049 {
2050 u32 eec;
2051 u32 mask;
2052 u32 i;
2053
2054 DEBUGFUNC("ixgbe_shift_out_eeprom_bits");
2055
2056 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
2057
2058 /*
2059 * Mask is used to shift "count" bits of "data" out to the EEPROM
2060 * one bit at a time. Determine the starting bit based on count
2061 */
2062 mask = 0x01 << (count - 1);
2063
2064 for (i = 0; i < count; i++) {
2065 /*
2066 * A "1" is shifted out to the EEPROM by setting bit "DI" to a
2067 * "1", and then raising and then lowering the clock (the SK
2068 * bit controls the clock input to the EEPROM). A "0" is
2069 * shifted out to the EEPROM by setting "DI" to "0" and then
2070 * raising and then lowering the clock.
2071 */
2072 if (data & mask)
2073 eec |= IXGBE_EEC_DI;
2074 else
2075 eec &= ~IXGBE_EEC_DI;
2076
2077 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2078 IXGBE_WRITE_FLUSH(hw);
2079
2080 usec_delay(1);
2081
2082 ixgbe_raise_eeprom_clk(hw, &eec);
2083 ixgbe_lower_eeprom_clk(hw, &eec);
2084
2085 /*
2086 * Shift mask to signify next bit of data to shift in to the
2087 * EEPROM
2088 */
2089 mask = mask >> 1;
2090 }
2091
2092 /* We leave the "DI" bit set to "0" when we leave this routine. */
2093 eec &= ~IXGBE_EEC_DI;
2094 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2095 IXGBE_WRITE_FLUSH(hw);
2096 }
2097
2098 /**
2099 * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
2100 * @hw: pointer to hardware structure
2101 * @count: number of bits to shift
2102 **/
ixgbe_shift_in_eeprom_bits(struct ixgbe_hw * hw,u16 count)2103 static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
2104 {
2105 u32 eec;
2106 u32 i;
2107 u16 data = 0;
2108
2109 DEBUGFUNC("ixgbe_shift_in_eeprom_bits");
2110
2111 /*
2112 * In order to read a register from the EEPROM, we need to shift
2113 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
2114 * the clock input to the EEPROM (setting the SK bit), and then reading
2115 * the value of the "DO" bit. During this "shifting in" process the
2116 * "DI" bit should always be clear.
2117 */
2118 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
2119
2120 eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
2121
2122 for (i = 0; i < count; i++) {
2123 data = data << 1;
2124 ixgbe_raise_eeprom_clk(hw, &eec);
2125
2126 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
2127
2128 eec &= ~(IXGBE_EEC_DI);
2129 if (eec & IXGBE_EEC_DO)
2130 data |= 1;
2131
2132 ixgbe_lower_eeprom_clk(hw, &eec);
2133 }
2134
2135 return data;
2136 }
2137
2138 /**
2139 * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
2140 * @hw: pointer to hardware structure
2141 * @eec: EEC register's current value
2142 **/
ixgbe_raise_eeprom_clk(struct ixgbe_hw * hw,u32 * eec)2143 static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
2144 {
2145 DEBUGFUNC("ixgbe_raise_eeprom_clk");
2146
2147 /*
2148 * Raise the clock input to the EEPROM
2149 * (setting the SK bit), then delay
2150 */
2151 *eec = *eec | IXGBE_EEC_SK;
2152 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), *eec);
2153 IXGBE_WRITE_FLUSH(hw);
2154 usec_delay(1);
2155 }
2156
2157 /**
2158 * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
2159 * @hw: pointer to hardware structure
2160 * @eec: EEC's current value
2161 **/
ixgbe_lower_eeprom_clk(struct ixgbe_hw * hw,u32 * eec)2162 static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
2163 {
2164 DEBUGFUNC("ixgbe_lower_eeprom_clk");
2165
2166 /*
2167 * Lower the clock input to the EEPROM (clearing the SK bit), then
2168 * delay
2169 */
2170 *eec = *eec & ~IXGBE_EEC_SK;
2171 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), *eec);
2172 IXGBE_WRITE_FLUSH(hw);
2173 usec_delay(1);
2174 }
2175
2176 /**
2177 * ixgbe_release_eeprom - Release EEPROM, release semaphores
2178 * @hw: pointer to hardware structure
2179 **/
ixgbe_release_eeprom(struct ixgbe_hw * hw)2180 static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
2181 {
2182 u32 eec;
2183
2184 DEBUGFUNC("ixgbe_release_eeprom");
2185
2186 eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
2187
2188 eec |= IXGBE_EEC_CS; /* Pull CS high */
2189 eec &= ~IXGBE_EEC_SK; /* Lower SCK */
2190
2191 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2192 IXGBE_WRITE_FLUSH(hw);
2193
2194 usec_delay(1);
2195
2196 /* Stop requesting EEPROM access */
2197 eec &= ~IXGBE_EEC_REQ;
2198 IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), eec);
2199
2200 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
2201
2202 /* Delay before attempt to obtain semaphore again to allow FW access */
2203 msec_delay(hw->eeprom.semaphore_delay);
2204 }
2205
2206 /**
2207 * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
2208 * @hw: pointer to hardware structure
2209 *
2210 * Returns a negative error code on error, or the 16-bit checksum
2211 **/
ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw * hw)2212 s32 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
2213 {
2214 u16 i;
2215 u16 j;
2216 u16 checksum = 0;
2217 u16 length = 0;
2218 u16 pointer = 0;
2219 u16 word = 0;
2220
2221 DEBUGFUNC("ixgbe_calc_eeprom_checksum_generic");
2222
2223 /* Include 0x0-0x3F in the checksum */
2224 for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
2225 if (hw->eeprom.ops.read(hw, i, &word)) {
2226 DEBUGOUT("EEPROM read failed\n");
2227 return IXGBE_ERR_EEPROM;
2228 }
2229 checksum += word;
2230 }
2231
2232 /* Include all data from pointers except for the fw pointer */
2233 for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
2234 if (hw->eeprom.ops.read(hw, i, &pointer)) {
2235 DEBUGOUT("EEPROM read failed\n");
2236 return IXGBE_ERR_EEPROM;
2237 }
2238
2239 /* If the pointer seems invalid */
2240 if (pointer == 0xFFFF || pointer == 0)
2241 continue;
2242
2243 if (hw->eeprom.ops.read(hw, pointer, &length)) {
2244 DEBUGOUT("EEPROM read failed\n");
2245 return IXGBE_ERR_EEPROM;
2246 }
2247
2248 if (length == 0xFFFF || length == 0)
2249 continue;
2250
2251 for (j = pointer + 1; j <= pointer + length; j++) {
2252 if (hw->eeprom.ops.read(hw, j, &word)) {
2253 DEBUGOUT("EEPROM read failed\n");
2254 return IXGBE_ERR_EEPROM;
2255 }
2256 checksum += word;
2257 }
2258 }
2259
2260 checksum = (u16)IXGBE_EEPROM_SUM - checksum;
2261
2262 return (s32)checksum;
2263 }
2264
2265 /**
2266 * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
2267 * @hw: pointer to hardware structure
2268 * @checksum_val: calculated checksum
2269 *
2270 * Performs checksum calculation and validates the EEPROM checksum. If the
2271 * caller does not need checksum_val, the value can be NULL.
2272 **/
ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw * hw,u16 * checksum_val)2273 s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
2274 u16 *checksum_val)
2275 {
2276 s32 status;
2277 u16 checksum;
2278 u16 read_checksum = 0;
2279
2280 DEBUGFUNC("ixgbe_validate_eeprom_checksum_generic");
2281
2282 /* Read the first word from the EEPROM. If this times out or fails, do
2283 * not continue or we could be in for a very long wait while every
2284 * EEPROM read fails
2285 */
2286 status = hw->eeprom.ops.read(hw, 0, &checksum);
2287 if (status) {
2288 DEBUGOUT("EEPROM read failed\n");
2289 return status;
2290 }
2291
2292 status = hw->eeprom.ops.calc_checksum(hw);
2293 if (status < 0)
2294 return status;
2295
2296 checksum = (u16)(status & 0xffff);
2297
2298 status = hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
2299 if (status) {
2300 DEBUGOUT("EEPROM read failed\n");
2301 return status;
2302 }
2303
2304 /* Verify read checksum from EEPROM is the same as
2305 * calculated checksum
2306 */
2307 if (read_checksum != checksum)
2308 status = IXGBE_ERR_EEPROM_CHECKSUM;
2309
2310 /* If the user cares, return the calculated checksum */
2311 if (checksum_val)
2312 *checksum_val = checksum;
2313
2314 return status;
2315 }
2316
2317 /**
2318 * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
2319 * @hw: pointer to hardware structure
2320 **/
ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw * hw)2321 s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
2322 {
2323 s32 status;
2324 u16 checksum;
2325
2326 DEBUGFUNC("ixgbe_update_eeprom_checksum_generic");
2327
2328 /* Read the first word from the EEPROM. If this times out or fails, do
2329 * not continue or we could be in for a very long wait while every
2330 * EEPROM read fails
2331 */
2332 status = hw->eeprom.ops.read(hw, 0, &checksum);
2333 if (status) {
2334 DEBUGOUT("EEPROM read failed\n");
2335 return status;
2336 }
2337
2338 status = hw->eeprom.ops.calc_checksum(hw);
2339 if (status < 0)
2340 return status;
2341
2342 checksum = (u16)(status & 0xffff);
2343
2344 status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, checksum);
2345
2346 return status;
2347 }
2348
2349 /**
2350 * ixgbe_validate_mac_addr - Validate MAC address
2351 * @mac_addr: pointer to MAC address.
2352 *
2353 * Tests a MAC address to ensure it is a valid Individual Address.
2354 **/
ixgbe_validate_mac_addr(u8 * mac_addr)2355 s32 ixgbe_validate_mac_addr(u8 *mac_addr)
2356 {
2357 s32 status = IXGBE_SUCCESS;
2358
2359 DEBUGFUNC("ixgbe_validate_mac_addr");
2360
2361 /* Make sure it is not a multicast address */
2362 if (IXGBE_IS_MULTICAST(mac_addr)) {
2363 status = IXGBE_ERR_INVALID_MAC_ADDR;
2364 /* Not a broadcast address */
2365 } else if (IXGBE_IS_BROADCAST(mac_addr)) {
2366 status = IXGBE_ERR_INVALID_MAC_ADDR;
2367 /* Reject the zero address */
2368 } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
2369 mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
2370 status = IXGBE_ERR_INVALID_MAC_ADDR;
2371 }
2372 return status;
2373 }
2374
2375 /**
2376 * ixgbe_set_rar_generic - Set Rx address register
2377 * @hw: pointer to hardware structure
2378 * @index: Receive address register to write
2379 * @addr: Address to put into receive address register
2380 * @vmdq: VMDq "set" or "pool" index
2381 * @enable_addr: set flag that address is active
2382 *
2383 * Puts an ethernet address into a receive address register.
2384 **/
ixgbe_set_rar_generic(struct ixgbe_hw * hw,u32 index,u8 * addr,u32 vmdq,u32 enable_addr)2385 s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
2386 u32 enable_addr)
2387 {
2388 u32 rar_low, rar_high;
2389 u32 rar_entries = hw->mac.num_rar_entries;
2390
2391 DEBUGFUNC("ixgbe_set_rar_generic");
2392
2393 /* Make sure we are using a valid rar index range */
2394 if (index >= rar_entries) {
2395 ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
2396 "RAR index %d is out of range.\n", index);
2397 return IXGBE_ERR_INVALID_ARGUMENT;
2398 }
2399
2400 /* setup VMDq pool selection before this RAR gets enabled */
2401 hw->mac.ops.set_vmdq(hw, index, vmdq);
2402
2403 /*
2404 * HW expects these in little endian so we reverse the byte
2405 * order from network order (big endian) to little endian
2406 */
2407 rar_low = ((u32)addr[0] |
2408 ((u32)addr[1] << 8) |
2409 ((u32)addr[2] << 16) |
2410 ((u32)addr[3] << 24));
2411 /*
2412 * Some parts put the VMDq setting in the extra RAH bits,
2413 * so save everything except the lower 16 bits that hold part
2414 * of the address and the address valid bit.
2415 */
2416 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
2417 rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
2418 rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
2419
2420 if (enable_addr != 0)
2421 rar_high |= IXGBE_RAH_AV;
2422
2423 IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
2424 IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
2425
2426 return IXGBE_SUCCESS;
2427 }
2428
2429 /**
2430 * ixgbe_clear_rar_generic - Remove Rx address register
2431 * @hw: pointer to hardware structure
2432 * @index: Receive address register to write
2433 *
2434 * Clears an ethernet address from a receive address register.
2435 **/
ixgbe_clear_rar_generic(struct ixgbe_hw * hw,u32 index)2436 s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
2437 {
2438 u32 rar_high;
2439 u32 rar_entries = hw->mac.num_rar_entries;
2440
2441 DEBUGFUNC("ixgbe_clear_rar_generic");
2442
2443 /* Make sure we are using a valid rar index range */
2444 if (index >= rar_entries) {
2445 ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
2446 "RAR index %d is out of range.\n", index);
2447 return IXGBE_ERR_INVALID_ARGUMENT;
2448 }
2449
2450 /*
2451 * Some parts put the VMDq setting in the extra RAH bits,
2452 * so save everything except the lower 16 bits that hold part
2453 * of the address and the address valid bit.
2454 */
2455 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
2456 rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
2457
2458 IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
2459 IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
2460
2461 /* clear VMDq pool/queue selection for this RAR */
2462 hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
2463
2464 return IXGBE_SUCCESS;
2465 }
2466
2467 /**
2468 * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
2469 * @hw: pointer to hardware structure
2470 *
2471 * Places the MAC address in receive address register 0 and clears the rest
2472 * of the receive address registers. Clears the multicast table. Assumes
2473 * the receiver is in reset when the routine is called.
2474 **/
ixgbe_init_rx_addrs_generic(struct ixgbe_hw * hw)2475 s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
2476 {
2477 u32 i;
2478 u32 rar_entries = hw->mac.num_rar_entries;
2479
2480 DEBUGFUNC("ixgbe_init_rx_addrs_generic");
2481
2482 /*
2483 * If the current mac address is valid, assume it is a software override
2484 * to the permanent address.
2485 * Otherwise, use the permanent address from the eeprom.
2486 */
2487 if (ixgbe_validate_mac_addr(hw->mac.addr) ==
2488 IXGBE_ERR_INVALID_MAC_ADDR) {
2489 /* Get the MAC address from the RAR0 for later reference */
2490 hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
2491
2492 DEBUGOUT3(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
2493 hw->mac.addr[0], hw->mac.addr[1],
2494 hw->mac.addr[2]);
2495 DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
2496 hw->mac.addr[4], hw->mac.addr[5]);
2497 } else {
2498 /* Setup the receive address. */
2499 DEBUGOUT("Overriding MAC Address in RAR[0]\n");
2500 DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ",
2501 hw->mac.addr[0], hw->mac.addr[1],
2502 hw->mac.addr[2]);
2503 DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
2504 hw->mac.addr[4], hw->mac.addr[5]);
2505
2506 hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
2507 }
2508
2509 /* clear VMDq pool/queue selection for RAR 0 */
2510 hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
2511
2512 hw->addr_ctrl.overflow_promisc = 0;
2513
2514 hw->addr_ctrl.rar_used_count = 1;
2515
2516 /* Zero out the other receive addresses. */
2517 DEBUGOUT1("Clearing RAR[1-%d]\n", rar_entries - 1);
2518 for (i = 1; i < rar_entries; i++) {
2519 IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
2520 IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
2521 }
2522
2523 /* Clear the MTA */
2524 hw->addr_ctrl.mta_in_use = 0;
2525 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
2526
2527 DEBUGOUT(" Clearing MTA\n");
2528 for (i = 0; i < hw->mac.mcft_size; i++)
2529 IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
2530
2531 ixgbe_init_uta_tables(hw);
2532
2533 return IXGBE_SUCCESS;
2534 }
2535
2536 /**
2537 * ixgbe_add_uc_addr - Adds a secondary unicast address.
2538 * @hw: pointer to hardware structure
2539 * @addr: new address
2540 * @vmdq: VMDq "set" or "pool" index
2541 *
2542 * Adds it to unused receive address register or goes into promiscuous mode.
2543 **/
ixgbe_add_uc_addr(struct ixgbe_hw * hw,u8 * addr,u32 vmdq)2544 void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
2545 {
2546 u32 rar_entries = hw->mac.num_rar_entries;
2547 u32 rar;
2548
2549 DEBUGFUNC("ixgbe_add_uc_addr");
2550
2551 DEBUGOUT6(" UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
2552 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
2553
2554 /*
2555 * Place this address in the RAR if there is room,
2556 * else put the controller into promiscuous mode
2557 */
2558 if (hw->addr_ctrl.rar_used_count < rar_entries) {
2559 rar = hw->addr_ctrl.rar_used_count;
2560 hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
2561 DEBUGOUT1("Added a secondary address to RAR[%d]\n", rar);
2562 hw->addr_ctrl.rar_used_count++;
2563 } else {
2564 hw->addr_ctrl.overflow_promisc++;
2565 }
2566
2567 DEBUGOUT("ixgbe_add_uc_addr Complete\n");
2568 }
2569
2570 /**
2571 * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
2572 * @hw: pointer to hardware structure
2573 * @addr_list: the list of new addresses
2574 * @addr_count: number of addresses
2575 * @next: iterator function to walk the address list
2576 *
2577 * The given list replaces any existing list. Clears the secondary addrs from
2578 * receive address registers. Uses unused receive address registers for the
2579 * first secondary addresses, and falls back to promiscuous mode as needed.
2580 *
2581 * Drivers using secondary unicast addresses must set user_set_promisc when
2582 * manually putting the device into promiscuous mode.
2583 **/
ixgbe_update_uc_addr_list_generic(struct ixgbe_hw * hw,u8 * addr_list,u32 addr_count,ixgbe_mc_addr_itr next)2584 s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
2585 u32 addr_count, ixgbe_mc_addr_itr next)
2586 {
2587 u8 *addr;
2588 u32 i;
2589 u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
2590 u32 uc_addr_in_use;
2591 u32 fctrl;
2592 u32 vmdq;
2593
2594 DEBUGFUNC("ixgbe_update_uc_addr_list_generic");
2595
2596 /*
2597 * Clear accounting of old secondary address list,
2598 * don't count RAR[0]
2599 */
2600 uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
2601 hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
2602 hw->addr_ctrl.overflow_promisc = 0;
2603
2604 /* Zero out the other receive addresses */
2605 DEBUGOUT1("Clearing RAR[1-%d]\n", uc_addr_in_use+1);
2606 for (i = 0; i < uc_addr_in_use; i++) {
2607 IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0);
2608 IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0);
2609 }
2610
2611 /* Add the new addresses */
2612 for (i = 0; i < addr_count; i++) {
2613 DEBUGOUT(" Adding the secondary addresses:\n");
2614 addr = next(hw, &addr_list, &vmdq);
2615 ixgbe_add_uc_addr(hw, addr, vmdq);
2616 }
2617
2618 if (hw->addr_ctrl.overflow_promisc) {
2619 /* enable promisc if not already in overflow or set by user */
2620 if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
2621 DEBUGOUT(" Entering address overflow promisc mode\n");
2622 fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
2623 fctrl |= IXGBE_FCTRL_UPE;
2624 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
2625 }
2626 } else {
2627 /* only disable if set by overflow, not by user */
2628 if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
2629 DEBUGOUT(" Leaving address overflow promisc mode\n");
2630 fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
2631 fctrl &= ~IXGBE_FCTRL_UPE;
2632 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
2633 }
2634 }
2635
2636 DEBUGOUT("ixgbe_update_uc_addr_list_generic Complete\n");
2637 return IXGBE_SUCCESS;
2638 }
2639
2640 /**
2641 * ixgbe_mta_vector - Determines bit-vector in multicast table to set
2642 * @hw: pointer to hardware structure
2643 * @mc_addr: the multicast address
2644 *
2645 * Extracts the 12 bits, from a multicast address, to determine which
2646 * bit-vector to set in the multicast table. The hardware uses 12 bits, from
2647 * incoming rx multicast addresses, to determine the bit-vector to check in
2648 * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
2649 * by the MO field of the MCSTCTRL. The MO field is set during initialization
2650 * to mc_filter_type.
2651 **/
ixgbe_mta_vector(struct ixgbe_hw * hw,u8 * mc_addr)2652 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
2653 {
2654 u32 vector = 0;
2655
2656 DEBUGFUNC("ixgbe_mta_vector");
2657
2658 switch (hw->mac.mc_filter_type) {
2659 case 0: /* use bits [47:36] of the address */
2660 vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
2661 break;
2662 case 1: /* use bits [46:35] of the address */
2663 vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
2664 break;
2665 case 2: /* use bits [45:34] of the address */
2666 vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
2667 break;
2668 case 3: /* use bits [43:32] of the address */
2669 vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
2670 break;
2671 default: /* Invalid mc_filter_type */
2672 DEBUGOUT("MC filter type param set incorrectly\n");
2673 ASSERT(0);
2674 break;
2675 }
2676
2677 /* vector can only be 12-bits or boundary will be exceeded */
2678 vector &= 0xFFF;
2679 return vector;
2680 }
2681
2682 /**
2683 * ixgbe_set_mta - Set bit-vector in multicast table
2684 * @hw: pointer to hardware structure
2685 * @mc_addr: Multicast address
2686 *
2687 * Sets the bit-vector in the multicast table.
2688 **/
ixgbe_set_mta(struct ixgbe_hw * hw,u8 * mc_addr)2689 void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
2690 {
2691 u32 vector;
2692 u32 vector_bit;
2693 u32 vector_reg;
2694
2695 DEBUGFUNC("ixgbe_set_mta");
2696
2697 hw->addr_ctrl.mta_in_use++;
2698
2699 vector = ixgbe_mta_vector(hw, mc_addr);
2700 DEBUGOUT1(" bit-vector = 0x%03X\n", vector);
2701
2702 /*
2703 * The MTA is a register array of 128 32-bit registers. It is treated
2704 * like an array of 4096 bits. We want to set bit
2705 * BitArray[vector_value]. So we figure out what register the bit is
2706 * in, read it, OR in the new bit, then write back the new value. The
2707 * register is determined by the upper 7 bits of the vector value and
2708 * the bit within that register are determined by the lower 5 bits of
2709 * the value.
2710 */
2711 vector_reg = (vector >> 5) & 0x7F;
2712 vector_bit = vector & 0x1F;
2713 hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
2714 }
2715
2716 /**
2717 * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
2718 * @hw: pointer to hardware structure
2719 * @mc_addr_list: the list of new multicast addresses
2720 * @mc_addr_count: number of addresses
2721 * @next: iterator function to walk the multicast address list
2722 * @clear: flag, when set clears the table beforehand
2723 *
2724 * When the clear flag is set, the given list replaces any existing list.
2725 * Hashes the given addresses into the multicast table.
2726 **/
ixgbe_update_mc_addr_list_generic(struct ixgbe_hw * hw,u8 * mc_addr_list,u32 mc_addr_count,ixgbe_mc_addr_itr next,bool clear)2727 s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
2728 u32 mc_addr_count, ixgbe_mc_addr_itr next,
2729 bool clear)
2730 {
2731 u32 i;
2732 u32 vmdq;
2733
2734 DEBUGFUNC("ixgbe_update_mc_addr_list_generic");
2735
2736 /*
2737 * Set the new number of MC addresses that we are being requested to
2738 * use.
2739 */
2740 hw->addr_ctrl.num_mc_addrs = mc_addr_count;
2741 hw->addr_ctrl.mta_in_use = 0;
2742
2743 /* Clear mta_shadow */
2744 if (clear) {
2745 DEBUGOUT(" Clearing MTA\n");
2746 memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
2747 }
2748
2749 /* Update mta_shadow */
2750 for (i = 0; i < mc_addr_count; i++) {
2751 DEBUGOUT(" Adding the multicast addresses:\n");
2752 ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
2753 }
2754
2755 /* Enable mta */
2756 for (i = 0; i < hw->mac.mcft_size; i++)
2757 IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
2758 hw->mac.mta_shadow[i]);
2759
2760 if (hw->addr_ctrl.mta_in_use > 0)
2761 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
2762 IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
2763
2764 DEBUGOUT("ixgbe_update_mc_addr_list_generic Complete\n");
2765 return IXGBE_SUCCESS;
2766 }
2767
2768 /**
2769 * ixgbe_enable_mc_generic - Enable multicast address in RAR
2770 * @hw: pointer to hardware structure
2771 *
2772 * Enables multicast address in RAR and the use of the multicast hash table.
2773 **/
ixgbe_enable_mc_generic(struct ixgbe_hw * hw)2774 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
2775 {
2776 struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
2777
2778 DEBUGFUNC("ixgbe_enable_mc_generic");
2779
2780 if (a->mta_in_use > 0)
2781 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
2782 hw->mac.mc_filter_type);
2783
2784 return IXGBE_SUCCESS;
2785 }
2786
2787 /**
2788 * ixgbe_disable_mc_generic - Disable multicast address in RAR
2789 * @hw: pointer to hardware structure
2790 *
2791 * Disables multicast address in RAR and the use of the multicast hash table.
2792 **/
ixgbe_disable_mc_generic(struct ixgbe_hw * hw)2793 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
2794 {
2795 struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
2796
2797 DEBUGFUNC("ixgbe_disable_mc_generic");
2798
2799 if (a->mta_in_use > 0)
2800 IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
2801
2802 return IXGBE_SUCCESS;
2803 }
2804
2805 /**
2806 * ixgbe_fc_enable_generic - Enable flow control
2807 * @hw: pointer to hardware structure
2808 *
2809 * Enable flow control according to the current settings.
2810 **/
ixgbe_fc_enable_generic(struct ixgbe_hw * hw)2811 s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
2812 {
2813 s32 ret_val = IXGBE_SUCCESS;
2814 u32 mflcn_reg, fccfg_reg;
2815 u32 reg;
2816 u32 fcrtl, fcrth;
2817 int i;
2818
2819 DEBUGFUNC("ixgbe_fc_enable_generic");
2820
2821 /* Validate the water mark configuration */
2822 if (!hw->fc.pause_time) {
2823 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
2824 goto out;
2825 }
2826
2827 /* Low water mark of zero causes XOFF floods */
2828 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
2829 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
2830 hw->fc.high_water[i]) {
2831 if (!hw->fc.low_water[i] ||
2832 hw->fc.low_water[i] >= hw->fc.high_water[i]) {
2833 DEBUGOUT("Invalid water mark configuration\n");
2834 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
2835 goto out;
2836 }
2837 }
2838 }
2839
2840 /* Negotiate the fc mode to use */
2841 hw->mac.ops.fc_autoneg(hw);
2842
2843 /* Disable any previous flow control settings */
2844 mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
2845 mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE);
2846
2847 fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
2848 fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
2849
2850 /*
2851 * The possible values of fc.current_mode are:
2852 * 0: Flow control is completely disabled
2853 * 1: Rx flow control is enabled (we can receive pause frames,
2854 * but not send pause frames).
2855 * 2: Tx flow control is enabled (we can send pause frames but
2856 * we do not support receiving pause frames).
2857 * 3: Both Rx and Tx flow control (symmetric) are enabled.
2858 * other: Invalid.
2859 */
2860 switch (hw->fc.current_mode) {
2861 case ixgbe_fc_none:
2862 /*
2863 * Flow control is disabled by software override or autoneg.
2864 * The code below will actually disable it in the HW.
2865 */
2866 break;
2867 case ixgbe_fc_rx_pause:
2868 /*
2869 * Rx Flow control is enabled and Tx Flow control is
2870 * disabled by software override. Since there really
2871 * isn't a way to advertise that we are capable of RX
2872 * Pause ONLY, we will advertise that we support both
2873 * symmetric and asymmetric Rx PAUSE. Later, we will
2874 * disable the adapter's ability to send PAUSE frames.
2875 */
2876 mflcn_reg |= IXGBE_MFLCN_RFCE;
2877 break;
2878 case ixgbe_fc_tx_pause:
2879 /*
2880 * Tx Flow control is enabled, and Rx Flow control is
2881 * disabled by software override.
2882 */
2883 fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
2884 break;
2885 case ixgbe_fc_full:
2886 /* Flow control (both Rx and Tx) is enabled by SW override. */
2887 mflcn_reg |= IXGBE_MFLCN_RFCE;
2888 fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
2889 break;
2890 default:
2891 ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
2892 "Flow control param set incorrectly\n");
2893 ret_val = IXGBE_ERR_CONFIG;
2894 goto out;
2895 break;
2896 }
2897
2898 /* Set 802.3x based flow control settings. */
2899 mflcn_reg |= IXGBE_MFLCN_DPF;
2900 IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
2901 IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
2902
2903
2904 /* Set up and enable Rx high/low water mark thresholds, enable XON. */
2905 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
2906 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
2907 hw->fc.high_water[i]) {
2908 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
2909 IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl);
2910 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
2911 } else {
2912 IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
2913 /*
2914 * In order to prevent Tx hangs when the internal Tx
2915 * switch is enabled we must set the high water mark
2916 * to the Rx packet buffer size - 24KB. This allows
2917 * the Tx switch to function even under heavy Rx
2918 * workloads.
2919 */
2920 fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 24576;
2921 }
2922
2923 IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth);
2924 }
2925
2926 /* Configure pause time (2 TCs per register) */
2927 reg = hw->fc.pause_time * 0x00010001;
2928 for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
2929 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
2930
2931 /* Configure flow control refresh threshold value */
2932 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
2933
2934 out:
2935 return ret_val;
2936 }
2937
2938 /**
2939 * ixgbe_negotiate_fc - Negotiate flow control
2940 * @hw: pointer to hardware structure
2941 * @adv_reg: flow control advertised settings
2942 * @lp_reg: link partner's flow control settings
2943 * @adv_sym: symmetric pause bit in advertisement
2944 * @adv_asm: asymmetric pause bit in advertisement
2945 * @lp_sym: symmetric pause bit in link partner advertisement
2946 * @lp_asm: asymmetric pause bit in link partner advertisement
2947 *
2948 * Find the intersection between advertised settings and link partner's
2949 * advertised settings
2950 **/
ixgbe_negotiate_fc(struct ixgbe_hw * hw,u32 adv_reg,u32 lp_reg,u32 adv_sym,u32 adv_asm,u32 lp_sym,u32 lp_asm)2951 s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
2952 u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
2953 {
2954 if ((!(adv_reg)) || (!(lp_reg))) {
2955 ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
2956 "Local or link partner's advertised flow control "
2957 "settings are NULL. Local: %x, link partner: %x\n",
2958 adv_reg, lp_reg);
2959 return IXGBE_ERR_FC_NOT_NEGOTIATED;
2960 }
2961
2962 if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
2963 /*
2964 * Now we need to check if the user selected Rx ONLY
2965 * of pause frames. In this case, we had to advertise
2966 * FULL flow control because we could not advertise RX
2967 * ONLY. Hence, we must now check to see if we need to
2968 * turn OFF the TRANSMISSION of PAUSE frames.
2969 */
2970 if (hw->fc.requested_mode == ixgbe_fc_full) {
2971 hw->fc.current_mode = ixgbe_fc_full;
2972 DEBUGOUT("Flow Control = FULL.\n");
2973 } else {
2974 hw->fc.current_mode = ixgbe_fc_rx_pause;
2975 DEBUGOUT("Flow Control=RX PAUSE frames only\n");
2976 }
2977 } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
2978 (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
2979 hw->fc.current_mode = ixgbe_fc_tx_pause;
2980 DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
2981 } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
2982 !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
2983 hw->fc.current_mode = ixgbe_fc_rx_pause;
2984 DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
2985 } else {
2986 hw->fc.current_mode = ixgbe_fc_none;
2987 DEBUGOUT("Flow Control = NONE.\n");
2988 }
2989 return IXGBE_SUCCESS;
2990 }
2991
2992 /**
2993 * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
2994 * @hw: pointer to hardware structure
2995 *
2996 * Enable flow control according on 1 gig fiber.
2997 **/
ixgbe_fc_autoneg_fiber(struct ixgbe_hw * hw)2998 static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
2999 {
3000 u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
3001 s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
3002
3003 /*
3004 * On multispeed fiber at 1g, bail out if
3005 * - link is up but AN did not complete, or if
3006 * - link is up and AN completed but timed out
3007 */
3008
3009 linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
3010 if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
3011 (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
3012 DEBUGOUT("Auto-Negotiation did not complete or timed out\n");
3013 goto out;
3014 }
3015
3016 pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
3017 pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
3018
3019 ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg,
3020 pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
3021 IXGBE_PCS1GANA_ASM_PAUSE,
3022 IXGBE_PCS1GANA_SYM_PAUSE,
3023 IXGBE_PCS1GANA_ASM_PAUSE);
3024
3025 out:
3026 return ret_val;
3027 }
3028
3029 /**
3030 * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
3031 * @hw: pointer to hardware structure
3032 *
3033 * Enable flow control according to IEEE clause 37.
3034 **/
ixgbe_fc_autoneg_backplane(struct ixgbe_hw * hw)3035 static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
3036 {
3037 u32 links2, anlp1_reg, autoc_reg, links;
3038 s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
3039
3040 /*
3041 * On backplane, bail out if
3042 * - backplane autoneg was not completed, or if
3043 * - we are 82599 and link partner is not AN enabled
3044 */
3045 links = IXGBE_READ_REG(hw, IXGBE_LINKS);
3046 if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
3047 DEBUGOUT("Auto-Negotiation did not complete\n");
3048 goto out;
3049 }
3050
3051 if (hw->mac.type == ixgbe_mac_82599EB) {
3052 links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
3053 if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
3054 DEBUGOUT("Link partner is not AN enabled\n");
3055 goto out;
3056 }
3057 }
3058 /*
3059 * Read the 10g AN autoc and LP ability registers and resolve
3060 * local flow control settings accordingly
3061 */
3062 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
3063 anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
3064
3065 ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
3066 anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
3067 IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
3068
3069 out:
3070 return ret_val;
3071 }
3072
3073 /**
3074 * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
3075 * @hw: pointer to hardware structure
3076 *
3077 * Enable flow control according to IEEE clause 37.
3078 **/
ixgbe_fc_autoneg_copper(struct ixgbe_hw * hw)3079 static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
3080 {
3081 u16 technology_ability_reg = 0;
3082 u16 lp_technology_ability_reg = 0;
3083
3084 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT,
3085 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3086 &technology_ability_reg);
3087 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_LP,
3088 IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
3089 &lp_technology_ability_reg);
3090
3091 return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
3092 (u32)lp_technology_ability_reg,
3093 IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
3094 IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
3095 }
3096
3097 /**
3098 * ixgbe_fc_autoneg - Configure flow control
3099 * @hw: pointer to hardware structure
3100 *
3101 * Compares our advertised flow control capabilities to those advertised by
3102 * our link partner, and determines the proper flow control mode to use.
3103 **/
ixgbe_fc_autoneg(struct ixgbe_hw * hw)3104 void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
3105 {
3106 s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
3107 ixgbe_link_speed speed;
3108 bool link_up;
3109
3110 DEBUGFUNC("ixgbe_fc_autoneg");
3111
3112 /*
3113 * AN should have completed when the cable was plugged in.
3114 * Look for reasons to bail out. Bail out if:
3115 * - FC autoneg is disabled, or if
3116 * - link is not up.
3117 */
3118 if (hw->fc.disable_fc_autoneg) {
3119 /* TODO: This should be just an informative log */
3120 ERROR_REPORT1(IXGBE_ERROR_CAUTION,
3121 "Flow control autoneg is disabled");
3122 goto out;
3123 }
3124
3125 hw->mac.ops.check_link(hw, &speed, &link_up, false);
3126 if (!link_up) {
3127 ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
3128 goto out;
3129 }
3130
3131 switch (hw->phy.media_type) {
3132 /* Autoneg flow control on fiber adapters */
3133 case ixgbe_media_type_fiber_fixed:
3134 case ixgbe_media_type_fiber_qsfp:
3135 case ixgbe_media_type_fiber:
3136 if (speed == IXGBE_LINK_SPEED_1GB_FULL)
3137 ret_val = ixgbe_fc_autoneg_fiber(hw);
3138 break;
3139
3140 /* Autoneg flow control on backplane adapters */
3141 case ixgbe_media_type_backplane:
3142 ret_val = ixgbe_fc_autoneg_backplane(hw);
3143 break;
3144
3145 /* Autoneg flow control on copper adapters */
3146 case ixgbe_media_type_copper:
3147 if (ixgbe_device_supports_autoneg_fc(hw))
3148 ret_val = ixgbe_fc_autoneg_copper(hw);
3149 break;
3150
3151 default:
3152 break;
3153 }
3154
3155 out:
3156 if (ret_val == IXGBE_SUCCESS) {
3157 hw->fc.fc_was_autonegged = true;
3158 } else {
3159 hw->fc.fc_was_autonegged = false;
3160 hw->fc.current_mode = hw->fc.requested_mode;
3161 }
3162 }
3163
3164 /*
3165 * ixgbe_pcie_timeout_poll - Return number of times to poll for completion
3166 * @hw: pointer to hardware structure
3167 *
3168 * System-wide timeout range is encoded in PCIe Device Control2 register.
3169 *
3170 * Add 10% to specified maximum and return the number of times to poll for
3171 * completion timeout, in units of 100 microsec. Never return less than
3172 * 800 = 80 millisec.
3173 */
ixgbe_pcie_timeout_poll(struct ixgbe_hw * hw)3174 static u32 ixgbe_pcie_timeout_poll(struct ixgbe_hw *hw)
3175 {
3176 s16 devctl2;
3177 u32 pollcnt;
3178
3179 devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
3180 devctl2 &= IXGBE_PCIDEVCTRL2_TIMEO_MASK;
3181
3182 switch (devctl2) {
3183 case IXGBE_PCIDEVCTRL2_65_130ms:
3184 pollcnt = 1300; /* 130 millisec */
3185 break;
3186 case IXGBE_PCIDEVCTRL2_260_520ms:
3187 pollcnt = 5200; /* 520 millisec */
3188 break;
3189 case IXGBE_PCIDEVCTRL2_1_2s:
3190 pollcnt = 20000; /* 2 sec */
3191 break;
3192 case IXGBE_PCIDEVCTRL2_4_8s:
3193 pollcnt = 80000; /* 8 sec */
3194 break;
3195 case IXGBE_PCIDEVCTRL2_17_34s:
3196 pollcnt = 34000; /* 34 sec */
3197 break;
3198 case IXGBE_PCIDEVCTRL2_50_100us: /* 100 microsecs */
3199 case IXGBE_PCIDEVCTRL2_1_2ms: /* 2 millisecs */
3200 case IXGBE_PCIDEVCTRL2_16_32ms: /* 32 millisec */
3201 case IXGBE_PCIDEVCTRL2_16_32ms_def: /* 32 millisec default */
3202 default:
3203 pollcnt = 800; /* 80 millisec minimum */
3204 break;
3205 }
3206
3207 /* add 10% to spec maximum */
3208 return (pollcnt * 11) / 10;
3209 }
3210
3211 /**
3212 * ixgbe_disable_pcie_primary - Disable PCI-express primary access
3213 * @hw: pointer to hardware structure
3214 *
3215 * Disables PCI-Express primary access and verifies there are no pending
3216 * requests. IXGBE_ERR_PRIMARY_REQUESTS_PENDING is returned if primary disable
3217 * bit hasn't caused the primary requests to be disabled, else IXGBE_SUCCESS
3218 * is returned signifying primary requests disabled.
3219 **/
ixgbe_disable_pcie_primary(struct ixgbe_hw * hw)3220 s32 ixgbe_disable_pcie_primary(struct ixgbe_hw *hw)
3221 {
3222 s32 status = IXGBE_SUCCESS;
3223 u32 i, poll;
3224 u16 value;
3225
3226 DEBUGFUNC("ixgbe_disable_pcie_primary");
3227
3228 /* Always set this bit to ensure any future transactions are blocked */
3229 IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS);
3230
3231 /* Exit if primary requests are blocked */
3232 if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO) ||
3233 IXGBE_REMOVED(hw->hw_addr))
3234 goto out;
3235
3236 /* Poll for primary request bit to clear */
3237 for (i = 0; i < IXGBE_PCI_PRIMARY_DISABLE_TIMEOUT; i++) {
3238 usec_delay(100);
3239 if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
3240 goto out;
3241 }
3242
3243 /*
3244 * Two consecutive resets are required via CTRL.RST per datasheet
3245 * 5.2.5.3.2 Primary Disable. We set a flag to inform the reset routine
3246 * of this need. The first reset prevents new primary requests from
3247 * being issued by our device. We then must wait 1usec or more for any
3248 * remaining completions from the PCIe bus to trickle in, and then reset
3249 * again to clear out any effects they may have had on our device.
3250 */
3251 DEBUGOUT("GIO Primary Disable bit didn't clear - requesting resets\n");
3252 hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
3253
3254 if (hw->mac.type >= ixgbe_mac_X550)
3255 goto out;
3256
3257 /*
3258 * Before proceeding, make sure that the PCIe block does not have
3259 * transactions pending.
3260 */
3261 poll = ixgbe_pcie_timeout_poll(hw);
3262 for (i = 0; i < poll; i++) {
3263 usec_delay(100);
3264 value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
3265 if (IXGBE_REMOVED(hw->hw_addr))
3266 goto out;
3267 if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
3268 goto out;
3269 }
3270
3271 ERROR_REPORT1(IXGBE_ERROR_POLLING,
3272 "PCIe transaction pending bit also did not clear.\n");
3273 status = IXGBE_ERR_PRIMARY_REQUESTS_PENDING;
3274
3275 out:
3276 return status;
3277 }
3278
3279 /**
3280 * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
3281 * @hw: pointer to hardware structure
3282 * @mask: Mask to specify which semaphore to acquire
3283 *
3284 * Acquires the SWFW semaphore through the GSSR register for the specified
3285 * function (CSR, PHY0, PHY1, EEPROM, Flash)
3286 **/
ixgbe_acquire_swfw_sync(struct ixgbe_hw * hw,u32 mask)3287 s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u32 mask)
3288 {
3289 u32 gssr = 0;
3290 u32 swmask = mask;
3291 u32 fwmask = mask << 5;
3292 u32 timeout = 200;
3293 u32 i;
3294
3295 DEBUGFUNC("ixgbe_acquire_swfw_sync");
3296
3297 for (i = 0; i < timeout; i++) {
3298 /*
3299 * SW NVM semaphore bit is used for access to all
3300 * SW_FW_SYNC bits (not just NVM)
3301 */
3302 if (ixgbe_get_eeprom_semaphore(hw))
3303 return IXGBE_ERR_SWFW_SYNC;
3304
3305 gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
3306 if (!(gssr & (fwmask | swmask))) {
3307 gssr |= swmask;
3308 IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
3309 ixgbe_release_eeprom_semaphore(hw);
3310 return IXGBE_SUCCESS;
3311 } else {
3312 /* Resource is currently in use by FW or SW */
3313 ixgbe_release_eeprom_semaphore(hw);
3314 msec_delay(5);
3315 }
3316 }
3317
3318 /* If time expired clear the bits holding the lock and retry */
3319 if (gssr & (fwmask | swmask))
3320 ixgbe_release_swfw_sync(hw, gssr & (fwmask | swmask));
3321
3322 msec_delay(5);
3323 return IXGBE_ERR_SWFW_SYNC;
3324 }
3325
3326 /**
3327 * ixgbe_release_swfw_sync - Release SWFW semaphore
3328 * @hw: pointer to hardware structure
3329 * @mask: Mask to specify which semaphore to release
3330 *
3331 * Releases the SWFW semaphore through the GSSR register for the specified
3332 * function (CSR, PHY0, PHY1, EEPROM, Flash)
3333 **/
ixgbe_release_swfw_sync(struct ixgbe_hw * hw,u32 mask)3334 void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u32 mask)
3335 {
3336 u32 gssr;
3337 u32 swmask = mask;
3338
3339 DEBUGFUNC("ixgbe_release_swfw_sync");
3340
3341 ixgbe_get_eeprom_semaphore(hw);
3342
3343 gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
3344 gssr &= ~swmask;
3345 IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
3346
3347 ixgbe_release_eeprom_semaphore(hw);
3348 }
3349
3350 /**
3351 * ixgbe_disable_sec_rx_path_generic - Stops the receive data path
3352 * @hw: pointer to hardware structure
3353 *
3354 * Stops the receive data path and waits for the HW to internally empty
3355 * the Rx security block
3356 **/
ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw * hw)3357 s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw)
3358 {
3359 #define IXGBE_MAX_SECRX_POLL 4000
3360
3361 int i;
3362 int secrxreg;
3363
3364 DEBUGFUNC("ixgbe_disable_sec_rx_path_generic");
3365
3366
3367 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
3368 secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
3369 IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
3370 for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
3371 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
3372 if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
3373 break;
3374 else
3375 /* Use interrupt-safe sleep just in case */
3376 usec_delay(10);
3377 }
3378
3379 /* For informational purposes only */
3380 if (i >= IXGBE_MAX_SECRX_POLL)
3381 DEBUGOUT("Rx unit being enabled before security "
3382 "path fully disabled. Continuing with init.\n");
3383
3384 return IXGBE_SUCCESS;
3385 }
3386
3387 /**
3388 * prot_autoc_read_generic - Hides MAC differences needed for AUTOC read
3389 * @hw: pointer to hardware structure
3390 * @locked: bool to indicate whether the SW/FW lock was taken
3391 * @reg_val: Value we read from AUTOC
3392 *
3393 * The default case requires no protection so just to the register read.
3394 */
prot_autoc_read_generic(struct ixgbe_hw * hw,bool * locked,u32 * reg_val)3395 s32 prot_autoc_read_generic(struct ixgbe_hw *hw, bool *locked, u32 *reg_val)
3396 {
3397 *locked = false;
3398 *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
3399 return IXGBE_SUCCESS;
3400 }
3401
3402 /**
3403 * prot_autoc_write_generic - Hides MAC differences needed for AUTOC write
3404 * @hw: pointer to hardware structure
3405 * @reg_val: value to write to AUTOC
3406 * @locked: bool to indicate whether the SW/FW lock was already taken by
3407 * previous read.
3408 *
3409 * The default case requires no protection so just to the register write.
3410 */
prot_autoc_write_generic(struct ixgbe_hw * hw,u32 reg_val,bool locked)3411 s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
3412 {
3413 UNREFERENCED_1PARAMETER(locked);
3414
3415 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_val);
3416 return IXGBE_SUCCESS;
3417 }
3418
3419 /**
3420 * ixgbe_enable_sec_rx_path_generic - Enables the receive data path
3421 * @hw: pointer to hardware structure
3422 *
3423 * Enables the receive data path.
3424 **/
ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw * hw)3425 s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
3426 {
3427 u32 secrxreg;
3428
3429 DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
3430
3431 secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
3432 secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
3433 IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
3434 IXGBE_WRITE_FLUSH(hw);
3435
3436 return IXGBE_SUCCESS;
3437 }
3438
3439 /**
3440 * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
3441 * @hw: pointer to hardware structure
3442 * @regval: register value to write to RXCTRL
3443 *
3444 * Enables the Rx DMA unit
3445 **/
ixgbe_enable_rx_dma_generic(struct ixgbe_hw * hw,u32 regval)3446 s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
3447 {
3448 DEBUGFUNC("ixgbe_enable_rx_dma_generic");
3449
3450 if (regval & IXGBE_RXCTRL_RXEN)
3451 ixgbe_enable_rx(hw);
3452 else
3453 ixgbe_disable_rx(hw);
3454
3455 return IXGBE_SUCCESS;
3456 }
3457
3458 /**
3459 * ixgbe_blink_led_start_generic - Blink LED based on index.
3460 * @hw: pointer to hardware structure
3461 * @index: led number to blink
3462 **/
ixgbe_blink_led_start_generic(struct ixgbe_hw * hw,u32 index)3463 s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
3464 {
3465 ixgbe_link_speed speed = 0;
3466 bool link_up = 0;
3467 u32 autoc_reg = 0;
3468 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
3469 s32 ret_val = IXGBE_SUCCESS;
3470 bool locked = false;
3471
3472 DEBUGFUNC("ixgbe_blink_led_start_generic");
3473
3474 if (index > 3)
3475 return IXGBE_ERR_PARAM;
3476
3477 /*
3478 * Link must be up to auto-blink the LEDs;
3479 * Force it if link is down.
3480 */
3481 hw->mac.ops.check_link(hw, &speed, &link_up, false);
3482
3483 if (!link_up) {
3484 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
3485 if (ret_val != IXGBE_SUCCESS)
3486 goto out;
3487
3488 autoc_reg |= IXGBE_AUTOC_AN_RESTART;
3489 autoc_reg |= IXGBE_AUTOC_FLU;
3490
3491 ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
3492 if (ret_val != IXGBE_SUCCESS)
3493 goto out;
3494
3495 IXGBE_WRITE_FLUSH(hw);
3496 msec_delay(10);
3497 }
3498
3499 led_reg &= ~IXGBE_LED_MODE_MASK(index);
3500 led_reg |= IXGBE_LED_BLINK(index);
3501 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
3502 IXGBE_WRITE_FLUSH(hw);
3503
3504 out:
3505 return ret_val;
3506 }
3507
3508 /**
3509 * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
3510 * @hw: pointer to hardware structure
3511 * @index: led number to stop blinking
3512 **/
ixgbe_blink_led_stop_generic(struct ixgbe_hw * hw,u32 index)3513 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
3514 {
3515 u32 autoc_reg = 0;
3516 u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
3517 s32 ret_val = IXGBE_SUCCESS;
3518 bool locked = false;
3519
3520 DEBUGFUNC("ixgbe_blink_led_stop_generic");
3521
3522 if (index > 3)
3523 return IXGBE_ERR_PARAM;
3524
3525 ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
3526 if (ret_val != IXGBE_SUCCESS)
3527 goto out;
3528
3529 autoc_reg &= ~IXGBE_AUTOC_FLU;
3530 autoc_reg |= IXGBE_AUTOC_AN_RESTART;
3531
3532 ret_val = hw->mac.ops.prot_autoc_write(hw, autoc_reg, locked);
3533 if (ret_val != IXGBE_SUCCESS)
3534 goto out;
3535
3536 led_reg &= ~IXGBE_LED_MODE_MASK(index);
3537 led_reg &= ~IXGBE_LED_BLINK(index);
3538 led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
3539 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
3540 IXGBE_WRITE_FLUSH(hw);
3541
3542 out:
3543 return ret_val;
3544 }
3545
3546 /**
3547 * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
3548 * @hw: pointer to hardware structure
3549 * @san_mac_offset: SAN MAC address offset
3550 *
3551 * This function will read the EEPROM location for the SAN MAC address
3552 * pointer, and returns the value at that location. This is used in both
3553 * get and set mac_addr routines.
3554 **/
ixgbe_get_san_mac_addr_offset(struct ixgbe_hw * hw,u16 * san_mac_offset)3555 static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
3556 u16 *san_mac_offset)
3557 {
3558 s32 ret_val;
3559
3560 DEBUGFUNC("ixgbe_get_san_mac_addr_offset");
3561
3562 /*
3563 * First read the EEPROM pointer to see if the MAC addresses are
3564 * available.
3565 */
3566 ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR,
3567 san_mac_offset);
3568 if (ret_val) {
3569 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
3570 "eeprom at offset %d failed",
3571 IXGBE_SAN_MAC_ADDR_PTR);
3572 }
3573
3574 return ret_val;
3575 }
3576
3577 /**
3578 * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
3579 * @hw: pointer to hardware structure
3580 * @san_mac_addr: SAN MAC address
3581 *
3582 * Reads the SAN MAC address from the EEPROM, if it's available. This is
3583 * per-port, so set_lan_id() must be called before reading the addresses.
3584 * set_lan_id() is called by identify_sfp(), but this cannot be relied
3585 * upon for non-SFP connections, so we must call it here.
3586 **/
ixgbe_get_san_mac_addr_generic(struct ixgbe_hw * hw,u8 * san_mac_addr)3587 s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
3588 {
3589 u16 san_mac_data, san_mac_offset;
3590 u8 i;
3591 s32 ret_val;
3592
3593 DEBUGFUNC("ixgbe_get_san_mac_addr_generic");
3594
3595 /*
3596 * First read the EEPROM pointer to see if the MAC addresses are
3597 * available. If they're not, no point in calling set_lan_id() here.
3598 */
3599 ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
3600 if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
3601 goto san_mac_addr_out;
3602
3603 /* make sure we know which port we need to program */
3604 hw->mac.ops.set_lan_id(hw);
3605 /* apply the port offset to the address offset */
3606 (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
3607 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
3608 for (i = 0; i < 3; i++) {
3609 ret_val = hw->eeprom.ops.read(hw, san_mac_offset,
3610 &san_mac_data);
3611 if (ret_val) {
3612 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
3613 "eeprom read at offset %d failed",
3614 san_mac_offset);
3615 goto san_mac_addr_out;
3616 }
3617 san_mac_addr[i * 2] = (u8)(san_mac_data);
3618 san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
3619 san_mac_offset++;
3620 }
3621 return IXGBE_SUCCESS;
3622
3623 san_mac_addr_out:
3624 /*
3625 * No addresses available in this EEPROM. It's not an
3626 * error though, so just wipe the local address and return.
3627 */
3628 for (i = 0; i < 6; i++)
3629 san_mac_addr[i] = 0xFF;
3630 return IXGBE_SUCCESS;
3631 }
3632
3633 /**
3634 * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM
3635 * @hw: pointer to hardware structure
3636 * @san_mac_addr: SAN MAC address
3637 *
3638 * Write a SAN MAC address to the EEPROM.
3639 **/
ixgbe_set_san_mac_addr_generic(struct ixgbe_hw * hw,u8 * san_mac_addr)3640 s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
3641 {
3642 s32 ret_val;
3643 u16 san_mac_data, san_mac_offset;
3644 u8 i;
3645
3646 DEBUGFUNC("ixgbe_set_san_mac_addr_generic");
3647
3648 /* Look for SAN mac address pointer. If not defined, return */
3649 ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
3650 if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF)
3651 return IXGBE_ERR_NO_SAN_ADDR_PTR;
3652
3653 /* Make sure we know which port we need to write */
3654 hw->mac.ops.set_lan_id(hw);
3655 /* Apply the port offset to the address offset */
3656 (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
3657 (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
3658
3659 for (i = 0; i < 3; i++) {
3660 san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8);
3661 san_mac_data |= (u16)(san_mac_addr[i * 2]);
3662 hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data);
3663 san_mac_offset++;
3664 }
3665
3666 return IXGBE_SUCCESS;
3667 }
3668
3669 /**
3670 * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
3671 * @hw: pointer to hardware structure
3672 *
3673 * Read PCIe configuration space, and get the MSI-X vector count from
3674 * the capabilities table.
3675 **/
ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw * hw)3676 u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
3677 {
3678 u16 msix_count = 1;
3679 u16 max_msix_count;
3680 u16 pcie_offset;
3681
3682 switch (hw->mac.type) {
3683 case ixgbe_mac_82598EB:
3684 pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS;
3685 max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598;
3686 break;
3687 case ixgbe_mac_82599EB:
3688 case ixgbe_mac_X540:
3689 case ixgbe_mac_X550:
3690 case ixgbe_mac_X550EM_x:
3691 case ixgbe_mac_X550EM_a:
3692 pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS;
3693 max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
3694 break;
3695 default:
3696 return msix_count;
3697 }
3698
3699 DEBUGFUNC("ixgbe_get_pcie_msix_count_generic");
3700 msix_count = IXGBE_READ_PCIE_WORD(hw, pcie_offset);
3701 if (IXGBE_REMOVED(hw->hw_addr))
3702 msix_count = 0;
3703 msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
3704
3705 /* MSI-X count is zero-based in HW */
3706 msix_count++;
3707
3708 if (msix_count > max_msix_count)
3709 msix_count = max_msix_count;
3710
3711 return msix_count;
3712 }
3713
3714 /**
3715 * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address
3716 * @hw: pointer to hardware structure
3717 * @addr: Address to put into receive address register
3718 * @vmdq: VMDq pool to assign
3719 *
3720 * Puts an ethernet address into a receive address register, or
3721 * finds the rar that it is already in; adds to the pool list
3722 **/
ixgbe_insert_mac_addr_generic(struct ixgbe_hw * hw,u8 * addr,u32 vmdq)3723 s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
3724 {
3725 static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF;
3726 u32 first_empty_rar = NO_EMPTY_RAR_FOUND;
3727 u32 rar;
3728 u32 rar_low, rar_high;
3729 u32 addr_low, addr_high;
3730
3731 DEBUGFUNC("ixgbe_insert_mac_addr_generic");
3732
3733 /* swap bytes for HW little endian */
3734 addr_low = addr[0] | (addr[1] << 8)
3735 | (addr[2] << 16)
3736 | (addr[3] << 24);
3737 addr_high = addr[4] | (addr[5] << 8);
3738
3739 /*
3740 * Either find the mac_id in rar or find the first empty space.
3741 * rar_highwater points to just after the highest currently used
3742 * rar in order to shorten the search. It grows when we add a new
3743 * rar to the top.
3744 */
3745 for (rar = 0; rar < hw->mac.rar_highwater; rar++) {
3746 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
3747
3748 if (((IXGBE_RAH_AV & rar_high) == 0)
3749 && first_empty_rar == NO_EMPTY_RAR_FOUND) {
3750 first_empty_rar = rar;
3751 } else if ((rar_high & 0xFFFF) == addr_high) {
3752 rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar));
3753 if (rar_low == addr_low)
3754 break; /* found it already in the rars */
3755 }
3756 }
3757
3758 if (rar < hw->mac.rar_highwater) {
3759 /* already there so just add to the pool bits */
3760 ixgbe_set_vmdq(hw, rar, vmdq);
3761 } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) {
3762 /* stick it into first empty RAR slot we found */
3763 rar = first_empty_rar;
3764 ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
3765 } else if (rar == hw->mac.rar_highwater) {
3766 /* add it to the top of the list and inc the highwater mark */
3767 ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
3768 hw->mac.rar_highwater++;
3769 } else if (rar >= hw->mac.num_rar_entries) {
3770 return IXGBE_ERR_INVALID_MAC_ADDR;
3771 }
3772
3773 /*
3774 * If we found rar[0], make sure the default pool bit (we use pool 0)
3775 * remains cleared to be sure default pool packets will get delivered
3776 */
3777 if (rar == 0)
3778 ixgbe_clear_vmdq(hw, rar, 0);
3779
3780 return rar;
3781 }
3782
3783 /**
3784 * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
3785 * @hw: pointer to hardware struct
3786 * @rar: receive address register index to disassociate
3787 * @vmdq: VMDq pool index to remove from the rar
3788 **/
ixgbe_clear_vmdq_generic(struct ixgbe_hw * hw,u32 rar,u32 vmdq)3789 s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
3790 {
3791 u32 mpsar_lo, mpsar_hi;
3792 u32 rar_entries = hw->mac.num_rar_entries;
3793
3794 DEBUGFUNC("ixgbe_clear_vmdq_generic");
3795
3796 /* Make sure we are using a valid rar index range */
3797 if (rar >= rar_entries) {
3798 ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
3799 "RAR index %d is out of range.\n", rar);
3800 return IXGBE_ERR_INVALID_ARGUMENT;
3801 }
3802
3803 mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
3804 mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
3805
3806 if (IXGBE_REMOVED(hw->hw_addr))
3807 goto done;
3808
3809 if (!mpsar_lo && !mpsar_hi)
3810 goto done;
3811
3812 if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
3813 if (mpsar_lo) {
3814 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
3815 mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
3816 }
3817 if (mpsar_hi) {
3818 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
3819 mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
3820 }
3821 } else if (vmdq < 32) {
3822 mpsar_lo &= ~(1 << vmdq);
3823 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
3824 } else {
3825 mpsar_hi &= ~(1 << (vmdq - 32));
3826 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
3827 }
3828
3829 /* was that the last pool using this rar? */
3830 if (mpsar_lo == 0 && mpsar_hi == 0 &&
3831 rar != 0 && rar != hw->mac.san_mac_rar_index)
3832 hw->mac.ops.clear_rar(hw, rar);
3833 done:
3834 return IXGBE_SUCCESS;
3835 }
3836
3837 /**
3838 * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
3839 * @hw: pointer to hardware struct
3840 * @rar: receive address register index to associate with a VMDq index
3841 * @vmdq: VMDq pool index
3842 **/
ixgbe_set_vmdq_generic(struct ixgbe_hw * hw,u32 rar,u32 vmdq)3843 s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
3844 {
3845 u32 mpsar;
3846 u32 rar_entries = hw->mac.num_rar_entries;
3847
3848 DEBUGFUNC("ixgbe_set_vmdq_generic");
3849
3850 /* Make sure we are using a valid rar index range */
3851 if (rar >= rar_entries) {
3852 ERROR_REPORT2(IXGBE_ERROR_ARGUMENT,
3853 "RAR index %d is out of range.\n", rar);
3854 return IXGBE_ERR_INVALID_ARGUMENT;
3855 }
3856
3857 if (vmdq < 32) {
3858 mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
3859 mpsar |= 1 << vmdq;
3860 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
3861 } else {
3862 mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
3863 mpsar |= 1 << (vmdq - 32);
3864 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
3865 }
3866 return IXGBE_SUCCESS;
3867 }
3868
3869 /**
3870 * ixgbe_set_vmdq_san_mac_generic - Associate default VMDq pool index with
3871 * a rx address
3872 * @hw: pointer to hardware struct
3873 * @vmdq: VMDq pool index
3874 *
3875 * This function should only be involved in the IOV mode.
3876 * In IOV mode, Default pool is next pool after the number of
3877 * VFs advertized and not 0.
3878 * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index]
3879 **/
ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw * hw,u32 vmdq)3880 s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq)
3881 {
3882 u32 rar = hw->mac.san_mac_rar_index;
3883
3884 DEBUGFUNC("ixgbe_set_vmdq_san_mac");
3885
3886 if (vmdq < 32) {
3887 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 1 << vmdq);
3888 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
3889 } else {
3890 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
3891 IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 1 << (vmdq - 32));
3892 }
3893
3894 return IXGBE_SUCCESS;
3895 }
3896
3897 /**
3898 * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
3899 * @hw: pointer to hardware structure
3900 **/
ixgbe_init_uta_tables_generic(struct ixgbe_hw * hw)3901 s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
3902 {
3903 int i;
3904
3905 DEBUGFUNC("ixgbe_init_uta_tables_generic");
3906 DEBUGOUT(" Clearing UTA\n");
3907
3908 for (i = 0; i < 128; i++)
3909 IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
3910
3911 return IXGBE_SUCCESS;
3912 }
3913
3914 /**
3915 * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
3916 * @hw: pointer to hardware structure
3917 * @vlan: VLAN id to write to VLAN filter
3918 * @vlvf_bypass: true to find vlanid only, false returns first empty slot if
3919 * vlanid not found
3920 *
3921 *
3922 * return the VLVF index where this VLAN id should be placed
3923 *
3924 **/
ixgbe_find_vlvf_slot(struct ixgbe_hw * hw,u32 vlan,bool vlvf_bypass)3925 s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass)
3926 {
3927 s32 regindex, first_empty_slot;
3928 u32 bits;
3929
3930 /* short cut the special case */
3931 if (vlan == 0)
3932 return 0;
3933
3934 /* if vlvf_bypass is set we don't want to use an empty slot, we
3935 * will simply bypass the VLVF if there are no entries present in the
3936 * VLVF that contain our VLAN
3937 */
3938 first_empty_slot = vlvf_bypass ? IXGBE_ERR_NO_SPACE : 0;
3939
3940 /* add VLAN enable bit for comparison */
3941 vlan |= IXGBE_VLVF_VIEN;
3942
3943 /* Search for the vlan id in the VLVF entries. Save off the first empty
3944 * slot found along the way.
3945 *
3946 * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1
3947 */
3948 for (regindex = IXGBE_VLVF_ENTRIES; --regindex;) {
3949 bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
3950 if (bits == vlan)
3951 return regindex;
3952 if (!first_empty_slot && !bits)
3953 first_empty_slot = regindex;
3954 }
3955
3956 /* If we are here then we didn't find the VLAN. Return first empty
3957 * slot we found during our search, else error.
3958 */
3959 if (!first_empty_slot)
3960 ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "No space in VLVF.\n");
3961
3962 return first_empty_slot ? first_empty_slot : IXGBE_ERR_NO_SPACE;
3963 }
3964
3965 /**
3966 * ixgbe_set_vfta_generic - Set VLAN filter table
3967 * @hw: pointer to hardware structure
3968 * @vlan: VLAN id to write to VLAN filter
3969 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
3970 * @vlan_on: boolean flag to turn on/off VLAN
3971 * @vlvf_bypass: boolean flag indicating updating default pool is okay
3972 *
3973 * Turn on/off specified VLAN in the VLAN filter table.
3974 **/
ixgbe_set_vfta_generic(struct ixgbe_hw * hw,u32 vlan,u32 vind,bool vlan_on,bool vlvf_bypass)3975 s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
3976 bool vlan_on, bool vlvf_bypass)
3977 {
3978 u32 regidx, vfta_delta, vfta;
3979 s32 ret_val;
3980
3981 DEBUGFUNC("ixgbe_set_vfta_generic");
3982
3983 if (vlan > 4095 || vind > 63)
3984 return IXGBE_ERR_PARAM;
3985
3986 /*
3987 * this is a 2 part operation - first the VFTA, then the
3988 * VLVF and VLVFB if VT Mode is set
3989 * We don't write the VFTA until we know the VLVF part succeeded.
3990 */
3991
3992 /* Part 1
3993 * The VFTA is a bitstring made up of 128 32-bit registers
3994 * that enable the particular VLAN id, much like the MTA:
3995 * bits[11-5]: which register
3996 * bits[4-0]: which bit in the register
3997 */
3998 regidx = vlan / 32;
3999 vfta_delta = 1 << (vlan % 32);
4000 vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
4001
4002 /*
4003 * vfta_delta represents the difference between the current value
4004 * of vfta and the value we want in the register. Since the diff
4005 * is an XOR mask we can just update the vfta using an XOR
4006 */
4007 vfta_delta &= vlan_on ? ~vfta : vfta;
4008 vfta ^= vfta_delta;
4009
4010 /* Part 2
4011 * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF
4012 */
4013 ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on, &vfta_delta,
4014 vfta, vlvf_bypass);
4015 if (ret_val != IXGBE_SUCCESS) {
4016 if (vlvf_bypass)
4017 goto vfta_update;
4018 return ret_val;
4019 }
4020
4021 vfta_update:
4022 /* Update VFTA now that we are ready for traffic */
4023 if (vfta_delta)
4024 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regidx), vfta);
4025
4026 return IXGBE_SUCCESS;
4027 }
4028
4029 /**
4030 * ixgbe_set_vlvf_generic - Set VLAN Pool Filter
4031 * @hw: pointer to hardware structure
4032 * @vlan: VLAN id to write to VLAN filter
4033 * @vind: VMDq output index that maps queue to VLAN id in VLVFB
4034 * @vlan_on: boolean flag to turn on/off VLAN in VLVF
4035 * @vfta_delta: pointer to the difference between the current value of VFTA
4036 * and the desired value
4037 * @vfta: the desired value of the VFTA
4038 * @vlvf_bypass: boolean flag indicating updating default pool is okay
4039 *
4040 * Turn on/off specified bit in VLVF table.
4041 **/
ixgbe_set_vlvf_generic(struct ixgbe_hw * hw,u32 vlan,u32 vind,bool vlan_on,u32 * vfta_delta,u32 vfta,bool vlvf_bypass)4042 s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
4043 bool vlan_on, u32 *vfta_delta, u32 vfta,
4044 bool vlvf_bypass)
4045 {
4046 u32 bits;
4047 s32 vlvf_index;
4048
4049 DEBUGFUNC("ixgbe_set_vlvf_generic");
4050
4051 if (vlan > 4095 || vind > 63)
4052 return IXGBE_ERR_PARAM;
4053
4054 /* If VT Mode is set
4055 * Either vlan_on
4056 * make sure the vlan is in VLVF
4057 * set the vind bit in the matching VLVFB
4058 * Or !vlan_on
4059 * clear the pool bit and possibly the vind
4060 */
4061 if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
4062 return IXGBE_SUCCESS;
4063
4064 vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
4065 if (vlvf_index < 0)
4066 return vlvf_index;
4067
4068 bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32));
4069
4070 /* set the pool bit */
4071 bits |= 1 << (vind % 32);
4072 if (vlan_on)
4073 goto vlvf_update;
4074
4075 /* clear the pool bit */
4076 bits ^= 1 << (vind % 32);
4077
4078 if (!bits &&
4079 !IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + 1 - vind / 32))) {
4080 /* Clear VFTA first, then disable VLVF. Otherwise
4081 * we run the risk of stray packets leaking into
4082 * the PF via the default pool
4083 */
4084 if (*vfta_delta)
4085 IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
4086
4087 /* disable VLVF and clear remaining bit from pool */
4088 IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
4089 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), 0);
4090
4091 return IXGBE_SUCCESS;
4092 }
4093
4094 /* If there are still bits set in the VLVFB registers
4095 * for the VLAN ID indicated we need to see if the
4096 * caller is requesting that we clear the VFTA entry bit.
4097 * If the caller has requested that we clear the VFTA
4098 * entry bit but there are still pools/VFs using this VLAN
4099 * ID entry then ignore the request. We're not worried
4100 * about the case where we're turning the VFTA VLAN ID
4101 * entry bit on, only when requested to turn it off as
4102 * there may be multiple pools and/or VFs using the
4103 * VLAN ID entry. In that case we cannot clear the
4104 * VFTA bit until all pools/VFs using that VLAN ID have also
4105 * been cleared. This will be indicated by "bits" being
4106 * zero.
4107 */
4108 *vfta_delta = 0;
4109
4110 vlvf_update:
4111 /* record pool change and enable VLAN ID if not already enabled */
4112 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), bits);
4113 IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), IXGBE_VLVF_VIEN | vlan);
4114
4115 return IXGBE_SUCCESS;
4116 }
4117
4118 /**
4119 * ixgbe_clear_vfta_generic - Clear VLAN filter table
4120 * @hw: pointer to hardware structure
4121 *
4122 * Clears the VLAN filter table, and the VMDq index associated with the filter
4123 **/
ixgbe_clear_vfta_generic(struct ixgbe_hw * hw)4124 s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
4125 {
4126 u32 offset;
4127
4128 DEBUGFUNC("ixgbe_clear_vfta_generic");
4129
4130 for (offset = 0; offset < hw->mac.vft_size; offset++)
4131 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
4132
4133 for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
4134 IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
4135 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
4136 IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2 + 1), 0);
4137 }
4138
4139 return IXGBE_SUCCESS;
4140 }
4141
4142
4143 /**
4144 * ixgbe_toggle_txdctl_generic - Toggle VF's queues
4145 * @hw: pointer to hardware structure
4146 * @vf_number: VF index
4147 *
4148 * Enable and disable each queue in VF.
4149 */
ixgbe_toggle_txdctl_generic(struct ixgbe_hw * hw,u32 vf_number)4150 s32 ixgbe_toggle_txdctl_generic(struct ixgbe_hw *hw, u32 vf_number)
4151 {
4152 u8 queue_count, i;
4153 u32 offset, reg;
4154
4155 if (vf_number > 63)
4156 return IXGBE_ERR_PARAM;
4157
4158 /*
4159 * Determine number of queues by checking
4160 * number of virtual functions
4161 */
4162 reg = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
4163 switch (reg & IXGBE_GCR_EXT_VT_MODE_MASK) {
4164 case IXGBE_GCR_EXT_VT_MODE_64:
4165 queue_count = 2;
4166 break;
4167 case IXGBE_GCR_EXT_VT_MODE_32:
4168 queue_count = 4;
4169 break;
4170 case IXGBE_GCR_EXT_VT_MODE_16:
4171 queue_count = 8;
4172 break;
4173 default:
4174 return IXGBE_ERR_CONFIG;
4175 }
4176
4177 /* Toggle queues */
4178 for (i = 0; i < queue_count; ++i) {
4179 /* Calculate offset of current queue */
4180 offset = queue_count * vf_number + i;
4181
4182 /* Enable queue */
4183 reg = IXGBE_READ_REG(hw, IXGBE_PVFTXDCTL(offset));
4184 reg |= IXGBE_TXDCTL_ENABLE;
4185 IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(offset), reg);
4186 IXGBE_WRITE_FLUSH(hw);
4187
4188 /* Disable queue */
4189 reg = IXGBE_READ_REG(hw, IXGBE_PVFTXDCTL(offset));
4190 reg &= ~IXGBE_TXDCTL_ENABLE;
4191 IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(offset), reg);
4192 IXGBE_WRITE_FLUSH(hw);
4193 }
4194
4195 return IXGBE_SUCCESS;
4196 }
4197
4198 /**
4199 * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
4200 * @hw: pointer to hardware structure
4201 *
4202 * Contains the logic to identify if we need to verify link for the
4203 * crosstalk fix
4204 **/
ixgbe_need_crosstalk_fix(struct ixgbe_hw * hw)4205 static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
4206 {
4207
4208 /* Does FW say we need the fix */
4209 if (!hw->need_crosstalk_fix)
4210 return false;
4211
4212 /* Only consider SFP+ PHYs i.e. media type fiber */
4213 switch (hw->mac.ops.get_media_type(hw)) {
4214 case ixgbe_media_type_fiber:
4215 case ixgbe_media_type_fiber_qsfp:
4216 break;
4217 default:
4218 return false;
4219 }
4220
4221 return true;
4222 }
4223
4224 /**
4225 * ixgbe_check_mac_link_generic - Determine link and speed status
4226 * @hw: pointer to hardware structure
4227 * @speed: pointer to link speed
4228 * @link_up: true when link is up
4229 * @link_up_wait_to_complete: bool used to wait for link up or not
4230 *
4231 * Reads the links register to determine if link is up and the current speed
4232 **/
ixgbe_check_mac_link_generic(struct ixgbe_hw * hw,ixgbe_link_speed * speed,bool * link_up,bool link_up_wait_to_complete)4233 s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
4234 bool *link_up, bool link_up_wait_to_complete)
4235 {
4236 u32 links_reg, links_orig;
4237 u32 i;
4238
4239 DEBUGFUNC("ixgbe_check_mac_link_generic");
4240
4241 /* If Crosstalk fix enabled do the sanity check of making sure
4242 * the SFP+ cage is full.
4243 */
4244 if (ixgbe_need_crosstalk_fix(hw)) {
4245 u32 sfp_cage_full;
4246
4247 switch (hw->mac.type) {
4248 case ixgbe_mac_82599EB:
4249 sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
4250 IXGBE_ESDP_SDP2;
4251 break;
4252 case ixgbe_mac_X550EM_x:
4253 case ixgbe_mac_X550EM_a:
4254 sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
4255 IXGBE_ESDP_SDP0;
4256 break;
4257 default:
4258 /* sanity check - No SFP+ devices here */
4259 sfp_cage_full = false;
4260 break;
4261 }
4262
4263 if (!sfp_cage_full) {
4264 *link_up = false;
4265 *speed = IXGBE_LINK_SPEED_UNKNOWN;
4266 return IXGBE_SUCCESS;
4267 }
4268 }
4269
4270 /* clear the old state */
4271 links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
4272
4273 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
4274
4275 if (links_orig != links_reg) {
4276 DEBUGOUT2("LINKS changed from %08X to %08X\n",
4277 links_orig, links_reg);
4278 }
4279
4280 if (link_up_wait_to_complete) {
4281 for (i = 0; i < hw->mac.max_link_up_time; i++) {
4282 if (links_reg & IXGBE_LINKS_UP) {
4283 *link_up = true;
4284 break;
4285 } else {
4286 *link_up = false;
4287 }
4288 msec_delay(100);
4289 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
4290 }
4291 } else {
4292 if (links_reg & IXGBE_LINKS_UP) {
4293 if (ixgbe_need_crosstalk_fix(hw)) {
4294 /* Check the link state again after a delay
4295 * to filter out spurious link up
4296 * notifications.
4297 */
4298 msec_delay(5);
4299 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
4300 if (!(links_reg & IXGBE_LINKS_UP)) {
4301 *link_up = false;
4302 *speed = IXGBE_LINK_SPEED_UNKNOWN;
4303 return IXGBE_SUCCESS;
4304 }
4305
4306 }
4307 *link_up = true;
4308 } else {
4309 *link_up = false;
4310 }
4311 }
4312
4313 switch (links_reg & IXGBE_LINKS_SPEED_82599) {
4314 case IXGBE_LINKS_SPEED_10G_82599:
4315 *speed = IXGBE_LINK_SPEED_10GB_FULL;
4316 if (hw->mac.type >= ixgbe_mac_X550) {
4317 if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
4318 *speed = IXGBE_LINK_SPEED_2_5GB_FULL;
4319 }
4320 break;
4321 case IXGBE_LINKS_SPEED_1G_82599:
4322 *speed = IXGBE_LINK_SPEED_1GB_FULL;
4323 break;
4324 case IXGBE_LINKS_SPEED_100_82599:
4325 *speed = IXGBE_LINK_SPEED_100_FULL;
4326 if (hw->mac.type == ixgbe_mac_X550) {
4327 if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
4328 *speed = IXGBE_LINK_SPEED_5GB_FULL;
4329 }
4330 break;
4331 case IXGBE_LINKS_SPEED_10_X550EM_A:
4332 *speed = IXGBE_LINK_SPEED_UNKNOWN;
4333 if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
4334 hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L)
4335 *speed = IXGBE_LINK_SPEED_10_FULL;
4336 break;
4337 default:
4338 *speed = IXGBE_LINK_SPEED_UNKNOWN;
4339 }
4340
4341 return IXGBE_SUCCESS;
4342 }
4343
4344 /**
4345 * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from
4346 * the EEPROM
4347 * @hw: pointer to hardware structure
4348 * @wwnn_prefix: the alternative WWNN prefix
4349 * @wwpn_prefix: the alternative WWPN prefix
4350 *
4351 * This function will read the EEPROM from the alternative SAN MAC address
4352 * block to check the support for the alternative WWNN/WWPN prefix support.
4353 **/
ixgbe_get_wwn_prefix_generic(struct ixgbe_hw * hw,u16 * wwnn_prefix,u16 * wwpn_prefix)4354 s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
4355 u16 *wwpn_prefix)
4356 {
4357 u16 offset, caps;
4358 u16 alt_san_mac_blk_offset;
4359
4360 DEBUGFUNC("ixgbe_get_wwn_prefix_generic");
4361
4362 /* clear output first */
4363 *wwnn_prefix = 0xFFFF;
4364 *wwpn_prefix = 0xFFFF;
4365
4366 /* check if alternative SAN MAC is supported */
4367 offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR;
4368 if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset))
4369 goto wwn_prefix_err;
4370
4371 if ((alt_san_mac_blk_offset == 0) ||
4372 (alt_san_mac_blk_offset == 0xFFFF))
4373 goto wwn_prefix_out;
4374
4375 /* check capability in alternative san mac address block */
4376 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
4377 if (hw->eeprom.ops.read(hw, offset, &caps))
4378 goto wwn_prefix_err;
4379 if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
4380 goto wwn_prefix_out;
4381
4382 /* get the corresponding prefix for WWNN/WWPN */
4383 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
4384 if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) {
4385 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
4386 "eeprom read at offset %d failed", offset);
4387 }
4388
4389 offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
4390 if (hw->eeprom.ops.read(hw, offset, wwpn_prefix))
4391 goto wwn_prefix_err;
4392
4393 wwn_prefix_out:
4394 return IXGBE_SUCCESS;
4395
4396 wwn_prefix_err:
4397 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
4398 "eeprom read at offset %d failed", offset);
4399 return IXGBE_SUCCESS;
4400 }
4401
4402 /**
4403 * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM
4404 * @hw: pointer to hardware structure
4405 * @bs: the fcoe boot status
4406 *
4407 * This function will read the FCOE boot status from the iSCSI FCOE block
4408 **/
ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw * hw,u16 * bs)4409 s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs)
4410 {
4411 u16 offset, caps, flags;
4412 s32 status;
4413
4414 DEBUGFUNC("ixgbe_get_fcoe_boot_status_generic");
4415
4416 /* clear output first */
4417 *bs = ixgbe_fcoe_bootstatus_unavailable;
4418
4419 /* check if FCOE IBA block is present */
4420 offset = IXGBE_FCOE_IBA_CAPS_BLK_PTR;
4421 status = hw->eeprom.ops.read(hw, offset, &caps);
4422 if (status != IXGBE_SUCCESS)
4423 goto out;
4424
4425 if (!(caps & IXGBE_FCOE_IBA_CAPS_FCOE))
4426 goto out;
4427
4428 /* check if iSCSI FCOE block is populated */
4429 status = hw->eeprom.ops.read(hw, IXGBE_ISCSI_FCOE_BLK_PTR, &offset);
4430 if (status != IXGBE_SUCCESS)
4431 goto out;
4432
4433 if ((offset == 0) || (offset == 0xFFFF))
4434 goto out;
4435
4436 /* read fcoe flags in iSCSI FCOE block */
4437 offset = offset + IXGBE_ISCSI_FCOE_FLAGS_OFFSET;
4438 status = hw->eeprom.ops.read(hw, offset, &flags);
4439 if (status != IXGBE_SUCCESS)
4440 goto out;
4441
4442 if (flags & IXGBE_ISCSI_FCOE_FLAGS_ENABLE)
4443 *bs = ixgbe_fcoe_bootstatus_enabled;
4444 else
4445 *bs = ixgbe_fcoe_bootstatus_disabled;
4446
4447 out:
4448 return status;
4449 }
4450
4451 /**
4452 * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
4453 * @hw: pointer to hardware structure
4454 * @enable: enable or disable switch for MAC anti-spoofing
4455 * @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing
4456 *
4457 **/
ixgbe_set_mac_anti_spoofing(struct ixgbe_hw * hw,bool enable,int vf)4458 void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
4459 {
4460 int vf_target_reg = vf >> 3;
4461 int vf_target_shift = vf % 8;
4462 u32 pfvfspoof;
4463
4464 if (hw->mac.type == ixgbe_mac_82598EB)
4465 return;
4466
4467 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
4468 if (enable)
4469 pfvfspoof |= (1 << vf_target_shift);
4470 else
4471 pfvfspoof &= ~(1 << vf_target_shift);
4472 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
4473 }
4474
4475 /**
4476 * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
4477 * @hw: pointer to hardware structure
4478 * @enable: enable or disable switch for VLAN anti-spoofing
4479 * @vf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
4480 *
4481 **/
ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw * hw,bool enable,int vf)4482 void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
4483 {
4484 int vf_target_reg = vf >> 3;
4485 int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
4486 u32 pfvfspoof;
4487
4488 if (hw->mac.type == ixgbe_mac_82598EB)
4489 return;
4490
4491 pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
4492 if (enable)
4493 pfvfspoof |= (1 << vf_target_shift);
4494 else
4495 pfvfspoof &= ~(1 << vf_target_shift);
4496 IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
4497 }
4498
4499 /**
4500 * ixgbe_get_device_caps_generic - Get additional device capabilities
4501 * @hw: pointer to hardware structure
4502 * @device_caps: the EEPROM word with the extra device capabilities
4503 *
4504 * This function will read the EEPROM location for the device capabilities,
4505 * and return the word through device_caps.
4506 **/
ixgbe_get_device_caps_generic(struct ixgbe_hw * hw,u16 * device_caps)4507 s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
4508 {
4509 DEBUGFUNC("ixgbe_get_device_caps_generic");
4510
4511 hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
4512
4513 return IXGBE_SUCCESS;
4514 }
4515
4516 /**
4517 * ixgbe_enable_relaxed_ordering_gen2 - Enable relaxed ordering
4518 * @hw: pointer to hardware structure
4519 *
4520 **/
ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw * hw)4521 void ixgbe_enable_relaxed_ordering_gen2(struct ixgbe_hw *hw)
4522 {
4523 u32 regval;
4524 u32 i;
4525
4526 DEBUGFUNC("ixgbe_enable_relaxed_ordering_gen2");
4527
4528 /* Enable relaxed ordering */
4529 for (i = 0; i < hw->mac.max_tx_queues; i++) {
4530 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
4531 regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN;
4532 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
4533 }
4534
4535 for (i = 0; i < hw->mac.max_rx_queues; i++) {
4536 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
4537 regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN |
4538 IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
4539 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
4540 }
4541
4542 }
4543
4544 /**
4545 * ixgbe_calculate_checksum - Calculate checksum for buffer
4546 * @buffer: pointer to EEPROM
4547 * @length: size of EEPROM to calculate a checksum for
4548 * Calculates the checksum for some buffer on a specified length. The
4549 * checksum calculated is returned.
4550 **/
ixgbe_calculate_checksum(u8 * buffer,u32 length)4551 u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
4552 {
4553 u32 i;
4554 u8 sum = 0;
4555
4556 DEBUGFUNC("ixgbe_calculate_checksum");
4557
4558 if (!buffer)
4559 return 0;
4560
4561 for (i = 0; i < length; i++)
4562 sum += buffer[i];
4563
4564 return (u8) (0 - sum);
4565 }
4566
4567 /**
4568 * ixgbe_hic_unlocked - Issue command to manageability block unlocked
4569 * @hw: pointer to the HW structure
4570 * @buffer: command to write and where the return status will be placed
4571 * @length: length of buffer, must be multiple of 4 bytes
4572 * @timeout: time in ms to wait for command completion
4573 *
4574 * Communicates with the manageability block. On success return IXGBE_SUCCESS
4575 * else returns semaphore error when encountering an error acquiring
4576 * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
4577 *
4578 * This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
4579 * by the caller.
4580 **/
ixgbe_hic_unlocked(struct ixgbe_hw * hw,u32 * buffer,u32 length,u32 timeout)4581 s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
4582 u32 timeout)
4583 {
4584 u32 hicr, i, fwsts;
4585 u16 dword_len;
4586
4587 DEBUGFUNC("ixgbe_hic_unlocked");
4588
4589 if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
4590 DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
4591 return IXGBE_ERR_HOST_INTERFACE_COMMAND;
4592 }
4593
4594 /* Set bit 9 of FWSTS clearing FW reset indication */
4595 fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
4596 IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
4597
4598 /* Check that the host interface is enabled. */
4599 hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
4600 if (!(hicr & IXGBE_HICR_EN)) {
4601 DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
4602 return IXGBE_ERR_HOST_INTERFACE_COMMAND;
4603 }
4604
4605 /* Calculate length in DWORDs. We must be DWORD aligned */
4606 if (length % sizeof(u32)) {
4607 DEBUGOUT("Buffer length failure, not aligned to dword");
4608 return IXGBE_ERR_INVALID_ARGUMENT;
4609 }
4610
4611 dword_len = length >> 2;
4612
4613 /* The device driver writes the relevant command block
4614 * into the ram area.
4615 */
4616 for (i = 0; i < dword_len; i++)
4617 IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
4618 i, IXGBE_CPU_TO_LE32(buffer[i]));
4619
4620 /* Setting this bit tells the ARC that a new command is pending. */
4621 IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
4622
4623 for (i = 0; i < timeout; i++) {
4624 hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
4625 if (!(hicr & IXGBE_HICR_C))
4626 break;
4627 msec_delay(1);
4628 }
4629
4630 /* For each command except "Apply Update" perform
4631 * status checks in the HICR registry.
4632 */
4633 if ((buffer[0] & IXGBE_HOST_INTERFACE_MASK_CMD) ==
4634 IXGBE_HOST_INTERFACE_APPLY_UPDATE_CMD)
4635 return IXGBE_SUCCESS;
4636
4637 /* Check command completion */
4638 if ((timeout && i == timeout) ||
4639 !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
4640 ERROR_REPORT1(IXGBE_ERROR_CAUTION,
4641 "Command has failed with no status valid.\n");
4642 return IXGBE_ERR_HOST_INTERFACE_COMMAND;
4643 }
4644
4645 return IXGBE_SUCCESS;
4646 }
4647
4648 /**
4649 * ixgbe_host_interface_command - Issue command to manageability block
4650 * @hw: pointer to the HW structure
4651 * @buffer: contains the command to write and where the return status will
4652 * be placed
4653 * @length: length of buffer, must be multiple of 4 bytes
4654 * @timeout: time in ms to wait for command completion
4655 * @return_data: read and return data from the buffer (true) or not (false)
4656 * Needed because FW structures are big endian and decoding of
4657 * these fields can be 8 bit or 16 bit based on command. Decoding
4658 * is not easily understood without making a table of commands.
4659 * So we will leave this up to the caller to read back the data
4660 * in these cases.
4661 *
4662 * Communicates with the manageability block. On success return IXGBE_SUCCESS
4663 * else returns semaphore error when encountering an error acquiring
4664 * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
4665 **/
ixgbe_host_interface_command(struct ixgbe_hw * hw,u32 * buffer,u32 length,u32 timeout,bool return_data)4666 s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
4667 u32 length, u32 timeout, bool return_data)
4668 {
4669 u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
4670 struct ixgbe_hic_hdr *resp = (struct ixgbe_hic_hdr *)buffer;
4671 u16 buf_len;
4672 s32 status;
4673 u32 bi;
4674 u32 dword_len;
4675
4676 DEBUGFUNC("ixgbe_host_interface_command");
4677
4678 if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
4679 DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
4680 return IXGBE_ERR_HOST_INTERFACE_COMMAND;
4681 }
4682
4683 /* Take management host interface semaphore */
4684 status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
4685 if (status)
4686 return status;
4687
4688 status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
4689 if (status)
4690 goto rel_out;
4691
4692 if (!return_data)
4693 goto rel_out;
4694
4695 /* Calculate length in DWORDs */
4696 dword_len = hdr_size >> 2;
4697
4698 /* first pull in the header so we know the buffer length */
4699 for (bi = 0; bi < dword_len; bi++) {
4700 buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
4701 IXGBE_LE32_TO_CPUS(&buffer[bi]);
4702 }
4703
4704 /*
4705 * If there is any thing in data position pull it in
4706 * Read Flash command requires reading buffer length from
4707 * two byes instead of one byte
4708 */
4709 if (resp->cmd == IXGBE_HOST_INTERFACE_FLASH_READ_CMD ||
4710 resp->cmd == IXGBE_HOST_INTERFACE_SHADOW_RAM_READ_CMD) {
4711 for (; bi < dword_len + 2; bi++) {
4712 buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG,
4713 bi);
4714 IXGBE_LE32_TO_CPUS(&buffer[bi]);
4715 }
4716 buf_len = (((u16)(resp->cmd_or_resp.ret_status) << 3)
4717 & 0xF00) | resp->buf_len;
4718 hdr_size += (2 << 2);
4719 } else {
4720 buf_len = resp->buf_len;
4721 }
4722 if (!buf_len)
4723 goto rel_out;
4724
4725 if (length < buf_len + hdr_size) {
4726 DEBUGOUT("Buffer not large enough for reply message.\n");
4727 status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
4728 goto rel_out;
4729 }
4730
4731 /* Calculate length in DWORDs, add 3 for odd lengths */
4732 dword_len = (buf_len + 3) >> 2;
4733
4734 /* Pull in the rest of the buffer (bi is where we left off) */
4735 for (; bi <= dword_len; bi++) {
4736 buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
4737 IXGBE_LE32_TO_CPUS(&buffer[bi]);
4738 }
4739
4740 rel_out:
4741 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
4742
4743 return status;
4744 }
4745
4746 /**
4747 * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
4748 * @hw: pointer to the HW structure
4749 * @maj: driver version major number
4750 * @min: driver version minor number
4751 * @build: driver version build number
4752 * @sub: driver version sub build number
4753 * @len: unused
4754 * @driver_ver: unused
4755 *
4756 * Sends driver version number to firmware through the manageability
4757 * block. On success return IXGBE_SUCCESS
4758 * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
4759 * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
4760 **/
ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw * hw,u8 maj,u8 min,u8 build,u8 sub,u16 len,const char * driver_ver)4761 s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
4762 u8 build, u8 sub, u16 len,
4763 const char *driver_ver)
4764 {
4765 struct ixgbe_hic_drv_info fw_cmd;
4766 int i;
4767 s32 ret_val = IXGBE_SUCCESS;
4768
4769 DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
4770 UNREFERENCED_2PARAMETER(len, driver_ver);
4771
4772 fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
4773 fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
4774 fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
4775 fw_cmd.port_num = (u8)hw->bus.func;
4776 fw_cmd.ver_maj = maj;
4777 fw_cmd.ver_min = min;
4778 fw_cmd.ver_build = build;
4779 fw_cmd.ver_sub = sub;
4780 fw_cmd.hdr.checksum = 0;
4781 fw_cmd.pad = 0;
4782 fw_cmd.pad2 = 0;
4783 fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
4784 (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
4785
4786 for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
4787 ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
4788 sizeof(fw_cmd),
4789 IXGBE_HI_COMMAND_TIMEOUT,
4790 true);
4791 if (ret_val != IXGBE_SUCCESS)
4792 continue;
4793
4794 if (fw_cmd.hdr.cmd_or_resp.ret_status ==
4795 FW_CEM_RESP_STATUS_SUCCESS)
4796 ret_val = IXGBE_SUCCESS;
4797 else
4798 ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
4799
4800 break;
4801 }
4802
4803 return ret_val;
4804 }
4805
4806 /**
4807 * ixgbe_set_rxpba_generic - Initialize Rx packet buffer
4808 * @hw: pointer to hardware structure
4809 * @num_pb: number of packet buffers to allocate
4810 * @headroom: reserve n KB of headroom
4811 * @strategy: packet buffer allocation strategy
4812 **/
ixgbe_set_rxpba_generic(struct ixgbe_hw * hw,int num_pb,u32 headroom,int strategy)4813 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom,
4814 int strategy)
4815 {
4816 u32 pbsize = hw->mac.rx_pb_size;
4817 int i = 0;
4818 u32 rxpktsize, txpktsize, txpbthresh;
4819
4820 /* Reserve headroom */
4821 pbsize -= headroom;
4822
4823 if (!num_pb)
4824 num_pb = 1;
4825
4826 /* Divide remaining packet buffer space amongst the number of packet
4827 * buffers requested using supplied strategy.
4828 */
4829 switch (strategy) {
4830 case PBA_STRATEGY_WEIGHTED:
4831 /* ixgbe_dcb_pba_80_48 strategy weight first half of packet
4832 * buffer with 5/8 of the packet buffer space.
4833 */
4834 rxpktsize = (pbsize * 5) / (num_pb * 4);
4835 pbsize -= rxpktsize * (num_pb / 2);
4836 rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
4837 for (; i < (num_pb / 2); i++)
4838 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
4839 rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
4840 for (; i < num_pb; i++)
4841 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
4842 break;
4843 case PBA_STRATEGY_EQUAL:
4844 rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
4845 for (; i < num_pb; i++)
4846 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
4847 break;
4848 default:
4849 break;
4850 }
4851
4852 /* Only support an equally distributed Tx packet buffer strategy. */
4853 txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
4854 txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
4855 for (i = 0; i < num_pb; i++) {
4856 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
4857 IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
4858 }
4859
4860 /* Clear unused TCs, if any, to zero buffer size*/
4861 for (; i < IXGBE_MAX_PB; i++) {
4862 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
4863 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
4864 IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
4865 }
4866 }
4867
4868 /**
4869 * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo
4870 * @hw: pointer to the hardware structure
4871 *
4872 * The 82599 and x540 MACs can experience issues if TX work is still pending
4873 * when a reset occurs. This function prevents this by flushing the PCIe
4874 * buffers on the system.
4875 **/
ixgbe_clear_tx_pending(struct ixgbe_hw * hw)4876 void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
4877 {
4878 u32 gcr_ext, hlreg0, i, poll;
4879 u16 value;
4880
4881 /*
4882 * If double reset is not requested then all transactions should
4883 * already be clear and as such there is no work to do
4884 */
4885 if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED))
4886 return;
4887
4888 /*
4889 * Set loopback enable to prevent any transmits from being sent
4890 * should the link come up. This assumes that the RXCTRL.RXEN bit
4891 * has already been cleared.
4892 */
4893 hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
4894 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK);
4895
4896 /* Wait for a last completion before clearing buffers */
4897 IXGBE_WRITE_FLUSH(hw);
4898 msec_delay(3);
4899
4900 /*
4901 * Before proceeding, make sure that the PCIe block does not have
4902 * transactions pending.
4903 */
4904 poll = ixgbe_pcie_timeout_poll(hw);
4905 for (i = 0; i < poll; i++) {
4906 usec_delay(100);
4907 value = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS);
4908 if (IXGBE_REMOVED(hw->hw_addr))
4909 goto out;
4910 if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
4911 goto out;
4912 }
4913
4914 out:
4915 /* initiate cleaning flow for buffers in the PCIe transaction layer */
4916 gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
4917 IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT,
4918 gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR);
4919
4920 /* Flush all writes and allow 20usec for all transactions to clear */
4921 IXGBE_WRITE_FLUSH(hw);
4922 usec_delay(20);
4923
4924 /* restore previous register values */
4925 IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
4926 IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
4927 }
4928
4929 static const u8 ixgbe_emc_temp_data[4] = {
4930 IXGBE_EMC_INTERNAL_DATA,
4931 IXGBE_EMC_DIODE1_DATA,
4932 IXGBE_EMC_DIODE2_DATA,
4933 IXGBE_EMC_DIODE3_DATA
4934 };
4935 static const u8 ixgbe_emc_therm_limit[4] = {
4936 IXGBE_EMC_INTERNAL_THERM_LIMIT,
4937 IXGBE_EMC_DIODE1_THERM_LIMIT,
4938 IXGBE_EMC_DIODE2_THERM_LIMIT,
4939 IXGBE_EMC_DIODE3_THERM_LIMIT
4940 };
4941
4942 /**
4943 * ixgbe_get_thermal_sensor_data_generic - Gathers thermal sensor data
4944 * @hw: pointer to hardware structure
4945 *
4946 * Returns the thermal sensor data structure
4947 **/
ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw * hw)4948 s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
4949 {
4950 s32 status = IXGBE_SUCCESS;
4951 u16 ets_offset;
4952 u16 ets_cfg;
4953 u16 ets_sensor;
4954 u8 num_sensors;
4955 u8 sensor_index;
4956 u8 sensor_location;
4957 u8 i;
4958 struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
4959
4960 DEBUGFUNC("ixgbe_get_thermal_sensor_data_generic");
4961
4962 /* Only support thermal sensors attached to 82599 physical port 0 */
4963 if ((hw->mac.type != ixgbe_mac_82599EB) ||
4964 (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
4965 status = IXGBE_NOT_IMPLEMENTED;
4966 goto out;
4967 }
4968
4969 status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
4970 if (status)
4971 goto out;
4972
4973 if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) {
4974 status = IXGBE_NOT_IMPLEMENTED;
4975 goto out;
4976 }
4977
4978 status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
4979 if (status)
4980 goto out;
4981
4982 if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
4983 != IXGBE_ETS_TYPE_EMC) {
4984 status = IXGBE_NOT_IMPLEMENTED;
4985 goto out;
4986 }
4987
4988 num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
4989 if (num_sensors > IXGBE_MAX_SENSORS)
4990 num_sensors = IXGBE_MAX_SENSORS;
4991
4992 for (i = 0; i < num_sensors; i++) {
4993 status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
4994 &ets_sensor);
4995 if (status)
4996 goto out;
4997
4998 sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
4999 IXGBE_ETS_DATA_INDEX_SHIFT);
5000 sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
5001 IXGBE_ETS_DATA_LOC_SHIFT);
5002
5003 if (sensor_location != 0) {
5004 status = hw->phy.ops.read_i2c_byte(hw,
5005 ixgbe_emc_temp_data[sensor_index],
5006 IXGBE_I2C_THERMAL_SENSOR_ADDR,
5007 &data->sensor[i].temp);
5008 if (status)
5009 goto out;
5010 }
5011 }
5012 out:
5013 return status;
5014 }
5015
5016 /**
5017 * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
5018 * @hw: pointer to hardware structure
5019 *
5020 * Inits the thermal sensor thresholds according to the NVM map
5021 * and save off the threshold and location values into mac.thermal_sensor_data
5022 **/
ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw * hw)5023 s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
5024 {
5025 s32 status = IXGBE_SUCCESS;
5026 u16 offset;
5027 u16 ets_offset;
5028 u16 ets_cfg;
5029 u16 ets_sensor;
5030 u8 low_thresh_delta;
5031 u8 num_sensors;
5032 u8 sensor_index;
5033 u8 sensor_location;
5034 u8 therm_limit;
5035 u8 i;
5036 struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
5037
5038 DEBUGFUNC("ixgbe_init_thermal_sensor_thresh_generic");
5039
5040 memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
5041
5042 /* Only support thermal sensors attached to 82599 physical port 0 */
5043 if ((hw->mac.type != ixgbe_mac_82599EB) ||
5044 (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
5045 return IXGBE_NOT_IMPLEMENTED;
5046
5047 offset = IXGBE_ETS_CFG;
5048 if (hw->eeprom.ops.read(hw, offset, &ets_offset))
5049 goto eeprom_err;
5050 if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
5051 return IXGBE_NOT_IMPLEMENTED;
5052
5053 offset = ets_offset;
5054 if (hw->eeprom.ops.read(hw, offset, &ets_cfg))
5055 goto eeprom_err;
5056 if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
5057 != IXGBE_ETS_TYPE_EMC)
5058 return IXGBE_NOT_IMPLEMENTED;
5059
5060 low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
5061 IXGBE_ETS_LTHRES_DELTA_SHIFT);
5062 num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
5063
5064 for (i = 0; i < num_sensors; i++) {
5065 offset = ets_offset + 1 + i;
5066 if (hw->eeprom.ops.read(hw, offset, &ets_sensor)) {
5067 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
5068 "eeprom read at offset %d failed",
5069 offset);
5070 continue;
5071 }
5072 sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
5073 IXGBE_ETS_DATA_INDEX_SHIFT);
5074 sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
5075 IXGBE_ETS_DATA_LOC_SHIFT);
5076 therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
5077
5078 hw->phy.ops.write_i2c_byte(hw,
5079 ixgbe_emc_therm_limit[sensor_index],
5080 IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
5081
5082 if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) {
5083 data->sensor[i].location = sensor_location;
5084 data->sensor[i].caution_thresh = therm_limit;
5085 data->sensor[i].max_op_thresh = therm_limit -
5086 low_thresh_delta;
5087 }
5088 }
5089 return status;
5090
5091 eeprom_err:
5092 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
5093 "eeprom read at offset %d failed", offset);
5094 return IXGBE_NOT_IMPLEMENTED;
5095 }
5096
5097 /**
5098 * ixgbe_bypass_rw_generic - Bit bang data into by_pass FW
5099 *
5100 * @hw: pointer to hardware structure
5101 * @cmd: Command we send to the FW
5102 * @status: The reply from the FW
5103 *
5104 * Bit-bangs the cmd to the by_pass FW status points to what is returned.
5105 **/
5106 #define IXGBE_BYPASS_BB_WAIT 1
ixgbe_bypass_rw_generic(struct ixgbe_hw * hw,u32 cmd,u32 * status)5107 s32 ixgbe_bypass_rw_generic(struct ixgbe_hw *hw, u32 cmd, u32 *status)
5108 {
5109 int i;
5110 u32 sck, sdi, sdo, dir_sck, dir_sdi, dir_sdo;
5111 u32 esdp;
5112
5113 if (!status)
5114 return IXGBE_ERR_PARAM;
5115
5116 *status = 0;
5117
5118 /* SDP vary by MAC type */
5119 switch (hw->mac.type) {
5120 case ixgbe_mac_82599EB:
5121 sck = IXGBE_ESDP_SDP7;
5122 sdi = IXGBE_ESDP_SDP0;
5123 sdo = IXGBE_ESDP_SDP6;
5124 dir_sck = IXGBE_ESDP_SDP7_DIR;
5125 dir_sdi = IXGBE_ESDP_SDP0_DIR;
5126 dir_sdo = IXGBE_ESDP_SDP6_DIR;
5127 break;
5128 case ixgbe_mac_X540:
5129 sck = IXGBE_ESDP_SDP2;
5130 sdi = IXGBE_ESDP_SDP0;
5131 sdo = IXGBE_ESDP_SDP1;
5132 dir_sck = IXGBE_ESDP_SDP2_DIR;
5133 dir_sdi = IXGBE_ESDP_SDP0_DIR;
5134 dir_sdo = IXGBE_ESDP_SDP1_DIR;
5135 break;
5136 default:
5137 return IXGBE_ERR_DEVICE_NOT_SUPPORTED;
5138 }
5139
5140 /* Set SDP pins direction */
5141 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
5142 esdp |= dir_sck; /* SCK as output */
5143 esdp |= dir_sdi; /* SDI as output */
5144 esdp &= ~dir_sdo; /* SDO as input */
5145 esdp |= sck;
5146 esdp |= sdi;
5147 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5148 IXGBE_WRITE_FLUSH(hw);
5149 msec_delay(IXGBE_BYPASS_BB_WAIT);
5150
5151 /* Generate start condition */
5152 esdp &= ~sdi;
5153 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5154 IXGBE_WRITE_FLUSH(hw);
5155 msec_delay(IXGBE_BYPASS_BB_WAIT);
5156
5157 esdp &= ~sck;
5158 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5159 IXGBE_WRITE_FLUSH(hw);
5160 msec_delay(IXGBE_BYPASS_BB_WAIT);
5161
5162 /* Clock out the new control word and clock in the status */
5163 for (i = 0; i < 32; i++) {
5164 if ((cmd >> (31 - i)) & 0x01) {
5165 esdp |= sdi;
5166 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5167 } else {
5168 esdp &= ~sdi;
5169 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5170 }
5171 IXGBE_WRITE_FLUSH(hw);
5172 msec_delay(IXGBE_BYPASS_BB_WAIT);
5173
5174 esdp |= sck;
5175 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5176 IXGBE_WRITE_FLUSH(hw);
5177 msec_delay(IXGBE_BYPASS_BB_WAIT);
5178
5179 esdp &= ~sck;
5180 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5181 IXGBE_WRITE_FLUSH(hw);
5182 msec_delay(IXGBE_BYPASS_BB_WAIT);
5183
5184 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
5185 if (esdp & sdo)
5186 *status = (*status << 1) | 0x01;
5187 else
5188 *status = (*status << 1) | 0x00;
5189 msec_delay(IXGBE_BYPASS_BB_WAIT);
5190 }
5191
5192 /* stop condition */
5193 esdp |= sck;
5194 esdp &= ~sdi;
5195 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5196 IXGBE_WRITE_FLUSH(hw);
5197 msec_delay(IXGBE_BYPASS_BB_WAIT);
5198
5199 esdp |= sdi;
5200 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
5201 IXGBE_WRITE_FLUSH(hw);
5202
5203 /* set the page bits to match the cmd that the status it belongs to */
5204 *status = (*status & 0x3fffffff) | (cmd & 0xc0000000);
5205
5206 return IXGBE_SUCCESS;
5207 }
5208
5209 /**
5210 * ixgbe_bypass_valid_rd_generic - Verify valid return from bit-bang.
5211 * @in_reg: The register cmd for the bit-bang read.
5212 * @out_reg: The register returned from a bit-bang read.
5213 *
5214 * If we send a write we can't be sure it took until we can read back
5215 * that same register. It can be a problem as some of the fields may
5216 * for valid reasons change inbetween the time wrote the register and
5217 * we read it again to verify. So this function check everything we
5218 * can check and then assumes it worked.
5219 **/
ixgbe_bypass_valid_rd_generic(u32 in_reg,u32 out_reg)5220 bool ixgbe_bypass_valid_rd_generic(u32 in_reg, u32 out_reg)
5221 {
5222 u32 mask;
5223
5224 /* Page must match for all control pages */
5225 if ((in_reg & BYPASS_PAGE_M) != (out_reg & BYPASS_PAGE_M))
5226 return false;
5227
5228 switch (in_reg & BYPASS_PAGE_M) {
5229 case BYPASS_PAGE_CTL0:
5230 /* All the following can't change since the last write
5231 * - All the event actions
5232 * - The timeout value
5233 */
5234 mask = BYPASS_AUX_ON_M | BYPASS_MAIN_ON_M |
5235 BYPASS_MAIN_OFF_M | BYPASS_AUX_OFF_M |
5236 BYPASS_WDTIMEOUT_M |
5237 BYPASS_WDT_VALUE_M;
5238 if ((out_reg & mask) != (in_reg & mask))
5239 return false;
5240
5241 /* 0x0 is never a valid value for bypass status */
5242 if (!(out_reg & BYPASS_STATUS_OFF_M))
5243 return false;
5244 break;
5245 case BYPASS_PAGE_CTL1:
5246 /* All the following can't change since the last write
5247 * - time valid bit
5248 * - time we last sent
5249 */
5250 mask = BYPASS_CTL1_VALID_M | BYPASS_CTL1_TIME_M;
5251 if ((out_reg & mask) != (in_reg & mask))
5252 return false;
5253 break;
5254 case BYPASS_PAGE_CTL2:
5255 /* All we can check in this page is control number
5256 * which is already done above.
5257 */
5258 break;
5259 }
5260
5261 /* We are as sure as we can be return true */
5262 return true;
5263 }
5264
5265 /**
5266 * ixgbe_bypass_set_generic - Set a bypass field in the FW CTRL Regiter.
5267 *
5268 * @hw: pointer to hardware structure
5269 * @ctrl: The control word we are setting.
5270 * @event: The event we are setting in the FW. This also happens to
5271 * be the mask for the event we are setting (handy)
5272 * @action: The action we set the event to in the FW. This is in a
5273 * bit field that happens to be what we want to put in
5274 * the event spot (also handy)
5275 **/
ixgbe_bypass_set_generic(struct ixgbe_hw * hw,u32 ctrl,u32 event,u32 action)5276 s32 ixgbe_bypass_set_generic(struct ixgbe_hw *hw, u32 ctrl, u32 event,
5277 u32 action)
5278 {
5279 u32 by_ctl = 0;
5280 u32 cmd, verify;
5281 u32 count = 0;
5282
5283 /* Get current values */
5284 cmd = ctrl; /* just reading only need control number */
5285 if (ixgbe_bypass_rw_generic(hw, cmd, &by_ctl))
5286 return IXGBE_ERR_INVALID_ARGUMENT;
5287
5288 /* Set to new action */
5289 cmd = (by_ctl & ~event) | BYPASS_WE | action;
5290 if (ixgbe_bypass_rw_generic(hw, cmd, &by_ctl))
5291 return IXGBE_ERR_INVALID_ARGUMENT;
5292
5293 /* Page 0 force a FW eeprom write which is slow so verify */
5294 if ((cmd & BYPASS_PAGE_M) == BYPASS_PAGE_CTL0) {
5295 verify = BYPASS_PAGE_CTL0;
5296 do {
5297 if (count++ > 5)
5298 return IXGBE_BYPASS_FW_WRITE_FAILURE;
5299
5300 if (ixgbe_bypass_rw_generic(hw, verify, &by_ctl))
5301 return IXGBE_ERR_INVALID_ARGUMENT;
5302 } while (!ixgbe_bypass_valid_rd_generic(cmd, by_ctl));
5303 } else {
5304 /* We have give the FW time for the write to stick */
5305 msec_delay(100);
5306 }
5307
5308 return IXGBE_SUCCESS;
5309 }
5310
5311 /**
5312 * ixgbe_bypass_rd_eep_generic - Read the bypass FW eeprom addres.
5313 *
5314 * @hw: pointer to hardware structure
5315 * @addr: The bypass eeprom address to read.
5316 * @value: The 8b of data at the address above.
5317 **/
ixgbe_bypass_rd_eep_generic(struct ixgbe_hw * hw,u32 addr,u8 * value)5318 s32 ixgbe_bypass_rd_eep_generic(struct ixgbe_hw *hw, u32 addr, u8 *value)
5319 {
5320 u32 cmd;
5321 u32 status;
5322
5323
5324 /* send the request */
5325 cmd = BYPASS_PAGE_CTL2 | BYPASS_WE;
5326 cmd |= (addr << BYPASS_CTL2_OFFSET_SHIFT) & BYPASS_CTL2_OFFSET_M;
5327 if (ixgbe_bypass_rw_generic(hw, cmd, &status))
5328 return IXGBE_ERR_INVALID_ARGUMENT;
5329
5330 /* We have give the FW time for the write to stick */
5331 msec_delay(100);
5332
5333 /* now read the results */
5334 cmd &= ~BYPASS_WE;
5335 if (ixgbe_bypass_rw_generic(hw, cmd, &status))
5336 return IXGBE_ERR_INVALID_ARGUMENT;
5337
5338 *value = status & BYPASS_CTL2_DATA_M;
5339
5340 return IXGBE_SUCCESS;
5341 }
5342
5343 /**
5344 * ixgbe_get_orom_version - Return option ROM from EEPROM
5345 *
5346 * @hw: pointer to hardware structure
5347 * @nvm_ver: pointer to output structure
5348 *
5349 * if valid option ROM version, nvm_ver->or_valid set to true
5350 * else nvm_ver->or_valid is false.
5351 **/
ixgbe_get_orom_version(struct ixgbe_hw * hw,struct ixgbe_nvm_version * nvm_ver)5352 void ixgbe_get_orom_version(struct ixgbe_hw *hw,
5353 struct ixgbe_nvm_version *nvm_ver)
5354 {
5355 u16 offset, eeprom_cfg_blkh, eeprom_cfg_blkl;
5356
5357 nvm_ver->or_valid = false;
5358 /* Option Rom may or may not be present. Start with pointer */
5359 hw->eeprom.ops.read(hw, NVM_OROM_OFFSET, &offset);
5360
5361 /* make sure offset is valid */
5362 if ((offset == 0x0) || (offset == NVM_INVALID_PTR))
5363 return;
5364
5365 hw->eeprom.ops.read(hw, offset + NVM_OROM_BLK_HI, &eeprom_cfg_blkh);
5366 hw->eeprom.ops.read(hw, offset + NVM_OROM_BLK_LOW, &eeprom_cfg_blkl);
5367
5368 /* option rom exists and is valid */
5369 if ((eeprom_cfg_blkl | eeprom_cfg_blkh) == 0x0 ||
5370 eeprom_cfg_blkl == NVM_VER_INVALID ||
5371 eeprom_cfg_blkh == NVM_VER_INVALID)
5372 return;
5373
5374 nvm_ver->or_valid = true;
5375 nvm_ver->or_major = eeprom_cfg_blkl >> NVM_OROM_SHIFT;
5376 nvm_ver->or_build = (eeprom_cfg_blkl << NVM_OROM_SHIFT) |
5377 (eeprom_cfg_blkh >> NVM_OROM_SHIFT);
5378 nvm_ver->or_patch = eeprom_cfg_blkh & NVM_OROM_PATCH_MASK;
5379 }
5380
5381 /**
5382 * ixgbe_get_oem_prod_version - Return OEM Product version
5383 *
5384 * @hw: pointer to hardware structure
5385 * @nvm_ver: pointer to output structure
5386 *
5387 * if valid OEM product version, nvm_ver->oem_valid set to true
5388 * else nvm_ver->oem_valid is false.
5389 **/
ixgbe_get_oem_prod_version(struct ixgbe_hw * hw,struct ixgbe_nvm_version * nvm_ver)5390 void ixgbe_get_oem_prod_version(struct ixgbe_hw *hw,
5391 struct ixgbe_nvm_version *nvm_ver)
5392 {
5393 u16 rel_num, prod_ver, mod_len, cap, offset;
5394
5395 nvm_ver->oem_valid = false;
5396 hw->eeprom.ops.read(hw, NVM_OEM_PROD_VER_PTR, &offset);
5397
5398 /* Return if offset to OEM Product Version block is invalid */
5399 if (offset == 0x0 || offset == NVM_INVALID_PTR)
5400 return;
5401
5402 /* Read product version block */
5403 hw->eeprom.ops.read(hw, offset, &mod_len);
5404 hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_CAP_OFF, &cap);
5405
5406 /* Return if OEM product version block is invalid */
5407 if (mod_len != NVM_OEM_PROD_VER_MOD_LEN ||
5408 (cap & NVM_OEM_PROD_VER_CAP_MASK) != 0x0)
5409 return;
5410
5411 hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_OFF_L, &prod_ver);
5412 hw->eeprom.ops.read(hw, offset + NVM_OEM_PROD_VER_OFF_H, &rel_num);
5413
5414 /* Return if version is invalid */
5415 if ((rel_num | prod_ver) == 0x0 ||
5416 rel_num == NVM_VER_INVALID || prod_ver == NVM_VER_INVALID)
5417 return;
5418
5419 nvm_ver->oem_major = prod_ver >> NVM_VER_SHIFT;
5420 nvm_ver->oem_minor = prod_ver & NVM_VER_MASK;
5421 nvm_ver->oem_release = rel_num;
5422 nvm_ver->oem_valid = true;
5423 }
5424
5425 /**
5426 * ixgbe_get_etk_id - Return Etrack ID from EEPROM
5427 *
5428 * @hw: pointer to hardware structure
5429 * @nvm_ver: pointer to output structure
5430 *
5431 * word read errors will return 0xFFFF
5432 **/
ixgbe_get_etk_id(struct ixgbe_hw * hw,struct ixgbe_nvm_version * nvm_ver)5433 void ixgbe_get_etk_id(struct ixgbe_hw *hw, struct ixgbe_nvm_version *nvm_ver)
5434 {
5435 u16 etk_id_l, etk_id_h;
5436
5437 if (hw->eeprom.ops.read(hw, NVM_ETK_OFF_LOW, &etk_id_l))
5438 etk_id_l = NVM_VER_INVALID;
5439 if (hw->eeprom.ops.read(hw, NVM_ETK_OFF_HI, &etk_id_h))
5440 etk_id_h = NVM_VER_INVALID;
5441
5442 /* The word order for the version format is determined by high order
5443 * word bit 15.
5444 */
5445 if ((etk_id_h & NVM_ETK_VALID) == 0) {
5446 nvm_ver->etk_id = etk_id_h;
5447 nvm_ver->etk_id |= (etk_id_l << NVM_ETK_SHIFT);
5448 } else {
5449 nvm_ver->etk_id = etk_id_l;
5450 nvm_ver->etk_id |= (etk_id_h << NVM_ETK_SHIFT);
5451 }
5452 }
5453
5454 /**
5455 * ixgbe_get_nvm_version - Return version of NVM and its components
5456 *
5457 * @hw: pointer to hardware structure
5458 * @nvm_ver: pointer to output structure
5459 *
5460 * irrelevant component fields will return 0, read errors will return 0xff
5461 **/
ixgbe_get_nvm_version(struct ixgbe_hw * hw,struct ixgbe_nvm_version * nvm_ver)5462 void ixgbe_get_nvm_version(struct ixgbe_hw *hw,
5463 struct ixgbe_nvm_version *nvm_ver)
5464 {
5465 u16 word, phy_ver;
5466
5467 DEBUGFUNC("ixgbe_get_nvm_version");
5468
5469 memset(nvm_ver, 0, sizeof(struct ixgbe_nvm_version));
5470
5471 /* eeprom version is mac-type specific */
5472 switch (hw->mac.type) {
5473 case ixgbe_mac_82598EB:
5474 /* version of eeprom section */
5475 if (ixgbe_read_eeprom(hw, NVM_EEP_OFFSET_82598, &word))
5476 word = NVM_VER_INVALID;
5477 nvm_ver->nvm_major = ((word & NVM_EEP_MAJOR_MASK)
5478 >> NVM_EEP_MAJ_SHIFT);
5479 nvm_ver->nvm_minor = ((word & NVM_EEP_MINOR_MASK)
5480 >> NVM_EEP_MIN_SHIFT);
5481 nvm_ver->nvm_id = (word & NVM_EEP_ID_MASK);
5482 break;
5483 case ixgbe_mac_X540:
5484 /* version of eeprom section */
5485 if (ixgbe_read_eeprom(hw, NVM_EEP_OFFSET_X540, &word))
5486 word = NVM_VER_INVALID;
5487 nvm_ver->nvm_major = ((word & NVM_EEP_MAJOR_MASK)
5488 >> NVM_EEP_MAJ_SHIFT);
5489 nvm_ver->nvm_minor = ((word & NVM_EEP_MINOR_MASK)
5490 >> NVM_EEP_MIN_SHIFT);
5491 nvm_ver->nvm_id = (word & NVM_EEP_ID_MASK);
5492 break;
5493
5494 case ixgbe_mac_X550:
5495 case ixgbe_mac_X550EM_x:
5496 case ixgbe_mac_X550EM_a:
5497 /* version of eeprom section */
5498 if (ixgbe_read_eeprom(hw, NVM_EEP_OFFSET_X540, &word))
5499 word = NVM_VER_INVALID;
5500 nvm_ver->nvm_major = ((word & NVM_EEP_MAJOR_MASK)
5501 >> NVM_EEP_MAJ_SHIFT);
5502 nvm_ver->nvm_minor = (word & NVM_EEP_X550_MINOR_MASK);
5503
5504 break;
5505 default:
5506 break;
5507 }
5508
5509 /* phy version is mac-type specific */
5510 switch (hw->mac.type) {
5511 case ixgbe_mac_X540:
5512 case ixgbe_mac_X550:
5513 case ixgbe_mac_X550EM_x:
5514 case ixgbe_mac_X550EM_a:
5515 /* intel phy firmware version */
5516 if (ixgbe_read_eeprom(hw, NVM_EEP_PHY_OFF_X540, &word))
5517 word = NVM_VER_INVALID;
5518 nvm_ver->phy_fw_maj = ((word & NVM_PHY_MAJOR_MASK)
5519 >> NVM_PHY_MAJ_SHIFT);
5520 nvm_ver->phy_fw_min = ((word & NVM_PHY_MINOR_MASK)
5521 >> NVM_PHY_MIN_SHIFT);
5522 nvm_ver->phy_fw_id = (word & NVM_PHY_ID_MASK);
5523 break;
5524 default:
5525 break;
5526 }
5527
5528 ixgbe_get_etk_id(hw, nvm_ver);
5529
5530 /* devstarter image */
5531 if (ixgbe_read_eeprom(hw, NVM_DS_OFFSET, &word))
5532 word = NVM_VER_INVALID;
5533 nvm_ver->devstart_major = ((word & NVM_DS_MAJOR_MASK) >> NVM_DS_SHIFT);
5534 nvm_ver->devstart_minor = (word & NVM_DS_MINOR_MASK);
5535
5536 /* OEM customization word */
5537 if (ixgbe_read_eeprom(hw, NVM_OEM_OFFSET, &nvm_ver->oem_specific))
5538 nvm_ver->oem_specific = NVM_VER_INVALID;
5539
5540 /* vendor (not intel) phy firmware version */
5541 if (ixgbe_get_phy_firmware_version(hw, &phy_ver))
5542 phy_ver = NVM_VER_INVALID;
5543 nvm_ver->phy_vend_maj = ((phy_ver & NVM_PHYVEND_MAJOR_MASK)
5544 >> NVM_PHYVEND_SHIFT);
5545 nvm_ver->phy_vend_min = (phy_ver & NVM_PHYVEND_MINOR_MASK);
5546
5547 /* Option Rom may or may not be present. Start with pointer */
5548 ixgbe_get_orom_version(hw, nvm_ver);
5549 return;
5550 }
5551
5552 /**
5553 * ixgbe_dcb_get_rtrup2tc_generic - read rtrup2tc reg
5554 * @hw: pointer to hardware structure
5555 * @map: pointer to u8 arr for returning map
5556 *
5557 * Read the rtrup2tc HW register and resolve its content into map
5558 **/
ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw * hw,u8 * map)5559 void ixgbe_dcb_get_rtrup2tc_generic(struct ixgbe_hw *hw, u8 *map)
5560 {
5561 u32 reg, i;
5562
5563 reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
5564 for (i = 0; i < IXGBE_DCB_MAX_USER_PRIORITY; i++)
5565 map[i] = IXGBE_RTRUP2TC_UP_MASK &
5566 (reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT));
5567 return;
5568 }
5569
ixgbe_disable_rx_generic(struct ixgbe_hw * hw)5570 void ixgbe_disable_rx_generic(struct ixgbe_hw *hw)
5571 {
5572 u32 pfdtxgswc;
5573 u32 rxctrl;
5574
5575 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
5576 if (rxctrl & IXGBE_RXCTRL_RXEN) {
5577 if (hw->mac.type != ixgbe_mac_82598EB) {
5578 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
5579 if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
5580 pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
5581 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
5582 hw->mac.set_lben = true;
5583 } else {
5584 hw->mac.set_lben = false;
5585 }
5586 }
5587 rxctrl &= ~IXGBE_RXCTRL_RXEN;
5588 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
5589 }
5590 }
5591
ixgbe_enable_rx_generic(struct ixgbe_hw * hw)5592 void ixgbe_enable_rx_generic(struct ixgbe_hw *hw)
5593 {
5594 u32 pfdtxgswc;
5595 u32 rxctrl;
5596
5597 rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
5598 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, (rxctrl | IXGBE_RXCTRL_RXEN));
5599
5600 if (hw->mac.type != ixgbe_mac_82598EB) {
5601 if (hw->mac.set_lben) {
5602 pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
5603 pfdtxgswc |= IXGBE_PFDTXGSWC_VT_LBEN;
5604 IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
5605 hw->mac.set_lben = false;
5606 }
5607 }
5608 }
5609
5610 /**
5611 * ixgbe_mng_present - returns true when management capability is present
5612 * @hw: pointer to hardware structure
5613 */
ixgbe_mng_present(struct ixgbe_hw * hw)5614 bool ixgbe_mng_present(struct ixgbe_hw *hw)
5615 {
5616 u32 fwsm;
5617
5618 if (hw->mac.type < ixgbe_mac_82599EB)
5619 return false;
5620
5621 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw));
5622
5623 return !!(fwsm & IXGBE_FWSM_FW_MODE_PT);
5624 }
5625
5626 /**
5627 * ixgbe_mng_enabled - Is the manageability engine enabled?
5628 * @hw: pointer to hardware structure
5629 *
5630 * Returns true if the manageability engine is enabled.
5631 **/
ixgbe_mng_enabled(struct ixgbe_hw * hw)5632 bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
5633 {
5634 u32 fwsm, manc, factps;
5635
5636 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw));
5637 if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
5638 return false;
5639
5640 manc = IXGBE_READ_REG(hw, IXGBE_MANC);
5641 if (!(manc & IXGBE_MANC_RCV_TCO_EN))
5642 return false;
5643
5644 if (hw->mac.type <= ixgbe_mac_X540) {
5645 factps = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
5646 if (factps & IXGBE_FACTPS_MNGCG)
5647 return false;
5648 }
5649
5650 return true;
5651 }
5652
5653 /**
5654 * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
5655 * @hw: pointer to hardware structure
5656 * @speed: new link speed
5657 * @autoneg_wait_to_complete: true when waiting for completion is needed
5658 *
5659 * Set the link speed in the MAC and/or PHY register and restarts link.
5660 **/
ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw * hw,ixgbe_link_speed speed,bool autoneg_wait_to_complete)5661 s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
5662 ixgbe_link_speed speed,
5663 bool autoneg_wait_to_complete)
5664 {
5665 ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
5666 ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
5667 s32 status = IXGBE_SUCCESS;
5668 u32 speedcnt = 0;
5669 u32 i = 0;
5670 bool autoneg, link_up = false;
5671
5672 DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber");
5673
5674 /* Mask off requested but non-supported speeds */
5675 status = ixgbe_get_link_capabilities(hw, &link_speed, &autoneg);
5676 if (status != IXGBE_SUCCESS)
5677 return status;
5678
5679 speed &= link_speed;
5680
5681 /* Try each speed one by one, highest priority first. We do this in
5682 * software because 10Gb fiber doesn't support speed autonegotiation.
5683 */
5684 if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
5685 speedcnt++;
5686 highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
5687
5688 /* Set the module link speed */
5689 switch (hw->phy.media_type) {
5690 case ixgbe_media_type_fiber_fixed:
5691 case ixgbe_media_type_fiber:
5692 ixgbe_set_rate_select_speed(hw,
5693 IXGBE_LINK_SPEED_10GB_FULL);
5694 break;
5695 case ixgbe_media_type_fiber_qsfp:
5696 /* QSFP module automatically detects MAC link speed */
5697 break;
5698 default:
5699 DEBUGOUT("Unexpected media type.\n");
5700 break;
5701 }
5702
5703 /* Allow module to change analog characteristics (1G->10G) */
5704 msec_delay(40);
5705
5706 status = ixgbe_setup_mac_link(hw,
5707 IXGBE_LINK_SPEED_10GB_FULL,
5708 autoneg_wait_to_complete);
5709 if (status != IXGBE_SUCCESS)
5710 return status;
5711
5712 /* Flap the Tx laser if it has not already been done */
5713 ixgbe_flap_tx_laser(hw);
5714
5715 /* Wait for the controller to acquire link. Per IEEE 802.3ap,
5716 * Section 73.10.2, we may have to wait up to 1000ms if KR is
5717 * attempted. 82599 uses the same timing for 10g SFI.
5718 */
5719 for (i = 0; i < 10; i++) {
5720 /* Wait for the link partner to also set speed */
5721 msec_delay(100);
5722
5723 /* If we have link, just jump out */
5724 status = ixgbe_check_link(hw, &link_speed,
5725 &link_up, false);
5726 if (status != IXGBE_SUCCESS)
5727 return status;
5728
5729 if (link_up)
5730 goto out;
5731 }
5732 }
5733
5734 if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
5735 speedcnt++;
5736 if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
5737 highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
5738
5739 /* Set the module link speed */
5740 switch (hw->phy.media_type) {
5741 case ixgbe_media_type_fiber_fixed:
5742 case ixgbe_media_type_fiber:
5743 ixgbe_set_rate_select_speed(hw,
5744 IXGBE_LINK_SPEED_1GB_FULL);
5745 break;
5746 case ixgbe_media_type_fiber_qsfp:
5747 /* QSFP module automatically detects link speed */
5748 break;
5749 default:
5750 DEBUGOUT("Unexpected media type.\n");
5751 break;
5752 }
5753
5754 /* Allow module to change analog characteristics (10G->1G) */
5755 msec_delay(40);
5756
5757 status = ixgbe_setup_mac_link(hw,
5758 IXGBE_LINK_SPEED_1GB_FULL,
5759 autoneg_wait_to_complete);
5760 if (status != IXGBE_SUCCESS)
5761 return status;
5762
5763 /* Flap the Tx laser if it has not already been done */
5764 ixgbe_flap_tx_laser(hw);
5765
5766 /* Wait for the link partner to also set speed */
5767 msec_delay(100);
5768
5769 /* If we have link, just jump out */
5770 status = ixgbe_check_link(hw, &link_speed, &link_up, false);
5771 if (status != IXGBE_SUCCESS)
5772 return status;
5773
5774 if (link_up)
5775 goto out;
5776 }
5777
5778 /* We didn't get link. Configure back to the highest speed we tried,
5779 * (if there was more than one). We call ourselves back with just the
5780 * single highest speed that the user requested.
5781 */
5782 if (speedcnt > 1)
5783 status = ixgbe_setup_mac_link_multispeed_fiber(hw,
5784 highest_link_speed,
5785 autoneg_wait_to_complete);
5786
5787 out:
5788 /* Set autoneg_advertised value based on input link speed */
5789 hw->phy.autoneg_advertised = 0;
5790
5791 if (speed & IXGBE_LINK_SPEED_10GB_FULL)
5792 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
5793
5794 if (speed & IXGBE_LINK_SPEED_1GB_FULL)
5795 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
5796
5797 return status;
5798 }
5799
5800 /**
5801 * ixgbe_set_soft_rate_select_speed - Set module link speed
5802 * @hw: pointer to hardware structure
5803 * @speed: link speed to set
5804 *
5805 * Set module link speed via the soft rate select.
5806 */
ixgbe_set_soft_rate_select_speed(struct ixgbe_hw * hw,ixgbe_link_speed speed)5807 void ixgbe_set_soft_rate_select_speed(struct ixgbe_hw *hw,
5808 ixgbe_link_speed speed)
5809 {
5810 s32 status;
5811 u8 rs, eeprom_data;
5812
5813 switch (speed) {
5814 case IXGBE_LINK_SPEED_10GB_FULL:
5815 /* one bit mask same as setting on */
5816 rs = IXGBE_SFF_SOFT_RS_SELECT_10G;
5817 break;
5818 case IXGBE_LINK_SPEED_1GB_FULL:
5819 rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
5820 break;
5821 default:
5822 DEBUGOUT("Invalid fixed module speed\n");
5823 return;
5824 }
5825
5826 /* Set RS0 */
5827 status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
5828 IXGBE_I2C_EEPROM_DEV_ADDR2,
5829 &eeprom_data);
5830 if (status) {
5831 DEBUGOUT("Failed to read Rx Rate Select RS0\n");
5832 goto out;
5833 }
5834
5835 eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
5836
5837 status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
5838 IXGBE_I2C_EEPROM_DEV_ADDR2,
5839 eeprom_data);
5840 if (status) {
5841 DEBUGOUT("Failed to write Rx Rate Select RS0\n");
5842 goto out;
5843 }
5844
5845 /* Set RS1 */
5846 status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
5847 IXGBE_I2C_EEPROM_DEV_ADDR2,
5848 &eeprom_data);
5849 if (status) {
5850 DEBUGOUT("Failed to read Rx Rate Select RS1\n");
5851 goto out;
5852 }
5853
5854 eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) | rs;
5855
5856 status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
5857 IXGBE_I2C_EEPROM_DEV_ADDR2,
5858 eeprom_data);
5859 if (status) {
5860 DEBUGOUT("Failed to write Rx Rate Select RS1\n");
5861 goto out;
5862 }
5863 out:
5864 return;
5865 }
5866