1#!/bin/sh 2 3# Package which should be installed onto all EC2 AMIs: 4# * ebsnvme-id, which is very minimal and provides important EBS-specific 5# functionality, 6export VM_EXTRA_PACKAGES="${VM_EXTRA_PACKAGES} ebsnvme-id" 7 8# Services which should be enabled by default in rc.conf(5). 9export VM_RC_LIST="dev_aws_disk ntpd" 10 11# Build with a 7.9 GB partition; the growfs rc.d script will expand 12# the partition to fill the root disk after the EC2 instance is launched. 13# Note that if this is set to <N>G, we will end up with an <N+1> GB disk 14# image since VMSIZE is the size of the filesystem partition, not the disk 15# which it resides within. 16export VMSIZE=8000m 17 18# No swap space; it doesn't make sense to provision any as part of the disk 19# image when we could be launching onto a system with anywhere between 0.5 20# and 4096 GB of RAM. 21export NOSWAP=YES 22 23ec2_common() { 24 # Delete the pkg package and the repo database; they will likely be 25 # long out of date before the EC2 instance is launched. In 26 # unprivileged builds this is unnecessary as pkg will not be 27 # installed to begin with. 28 if [ -z "${NO_ROOT}" ]; then 29 mount -t devfs devfs ${DESTDIR}/dev 30 chroot ${DESTDIR} ${EMULATOR} env ASSUME_ALWAYS_YES=yes \ 31 /usr/sbin/pkg delete -f -y pkg 32 umount ${DESTDIR}/dev 33 rm -r ${DESTDIR}/var/db/pkg/repos/FreeBSD-ports 34 rm -r ${DESTDIR}/var/db/pkg/repos/FreeBSD-ports-kmods 35 fi 36 37 # Turn off IPv6 Duplicate Address Detection; the EC2 networking 38 # configuration makes it unnecessary. 39 echo 'net.inet6.ip6.dad_count=0' >> ${DESTDIR}/etc/sysctl.conf 40 metalog_add_data ./etc/sysctl.conf 41 42 # Tell gptboot not to wait 3 seconds for a keypress which will 43 # never arrive. 44 printf -- "-n\n" > ${DESTDIR}/boot.config 45 metalog_add_data ./boot.config 46 47 # Booting quickly is more important than giving users a chance to 48 # access the boot loader via the serial port. 49 echo 'autoboot_delay="-1"' >> ${DESTDIR}/boot/loader.conf 50 echo 'beastie_disable="YES"' >> ${DESTDIR}/boot/loader.conf 51 52 # The EFI RNG on Graviton 2 is particularly slow if we ask for the 53 # default 2048 bytes of entropy; ask for 64 bytes instead. 54 echo 'entropy_efi_seed_size="64"' >> ${DESTDIR}/boot/loader.conf 55 56 # The emulated keyboard attached to EC2 instances is inaccessible to 57 # users, and there is no mouse attached at all; disable to keyboard 58 # and the keyboard controller (to which the mouse would attach, if 59 # one existed) in order to save time in device probing. 60 echo 'hint.atkbd.0.disabled=1' >> ${DESTDIR}/boot/loader.conf 61 echo 'hint.atkbdc.0.disabled=1' >> ${DESTDIR}/boot/loader.conf 62 63 # There is no floppy drive on EC2 instances so disable the driver. 64 echo 'hint.fd.0.disabled=1' >> ${DESTDIR}/boot/loader.conf 65 echo 'hint.fdc.0.disabled=1' >> ${DESTDIR}/boot/loader.conf 66 67 # There is no parallel port on EC2 instances so disable driver. 68 echo 'hint.ppc.0.disabled=1' >> ${DESTDIR}/boot/loader.conf 69 70 # EC2 has two consoles: An emulated serial port ("system log"), 71 # which has been present since 2006; and a VGA console ("instance 72 # screenshot") which was introduced in 2016. 73 echo 'boot_multicons="YES"' >> ${DESTDIR}/boot/loader.conf 74 75 # Graviton 1 through Graviton 4 have a bug in their ACPI where they 76 # mark the PL061's pins as needing to be configured in PullUp mode 77 # (in fact the PL061 has no pullup/pulldown resistors). Graviton 1 78 # through Graviton 3 have non-functional PCI _EJ0 and need a value 79 # written to the PCI power status register in order to eject a 80 # device. EC2 instances with PCI (not PCIe) buses need a short 81 # delay before rescanning upon device detach. 82 echo 'debug.acpi.quirks="56"' >> ${DESTDIR}/boot/loader.conf 83 84 # The default behaviour of re-routing INTx interrupts causes a 85 # resource leak on INTRng (aka on Graviton systems). Repeated 86 # hotplug/unplug on PCI (not PCIe) Graviton systems ends up with 87 # a kernel panic unless we disable this. 88 echo 'hw.pci.intx_reroute=0' >> ${DESTDIR}/boot/loader.conf 89 90 # Load the kernel module for the Amazon "Elastic Network Adapter" 91 echo 'if_ena_load="YES"' >> ${DESTDIR}/boot/loader.conf 92 93 # Use the "nda" driver for accessing NVMe disks rather than the 94 # historical "nvd" driver. 95 echo 'hw.nvme.use_nvd="0"' >> ${DESTDIR}/boot/loader.conf 96 97 # Reduce the timeout for PCIe Eject ("hotunplug") requests. PCIe 98 # mandates a 5 second timeout to allow someone to cancel the eject 99 # by pressing the "Attention button" a second time, but in the EC2 100 # environment this delay serves no purpose. 101 echo 'hw.pci.pcie_hp_detach_timeout="0"' >> ${DESTDIR}/boot/loader.conf 102 metalog_add_data ./boot/loader.conf 103 104 # Disable KbdInteractiveAuthentication according to EC2 requirements. 105 sed -i '' -e \ 106 's/^#KbdInteractiveAuthentication yes/KbdInteractiveAuthentication no/' \ 107 ${DESTDIR}/etc/ssh/sshd_config 108 109 # RSA host keys are obsolete and also very slow to generate 110 echo 'sshd_rsa_enable="NO"' >> ${DESTDIR}/etc/rc.conf 111 112 # Use FreeBSD Update mirrors hosted in AWS 113 sed -i '' -e 's/update.FreeBSD.org/aws.update.FreeBSD.org/' \ 114 ${DESTDIR}/etc/freebsd-update.conf 115 116 # Use the NTP service provided by Amazon 117 sed -i '' -e 's/^pool/#pool/' \ 118 -e '1,/^#server/s/^#server.*/server 169.254.169.123 iburst/' \ 119 ${DESTDIR}/etc/ntp.conf 120 121 # Provide a map for accessing Elastic File System mounts 122 cat > ${DESTDIR}/etc/autofs/special_efs <<'EOF' 123#!/bin/sh 124 125if [ $# -eq 0 ]; then 126 # No way to know which EFS filesystems exist and are 127 # accessible to this EC2 instance. 128 exit 0 129fi 130 131# Provide instructions on how to mount the requested filesystem. 132FS=$1 133REGION=`fetch -qo- http://169.254.169.254/latest/meta-data/placement/availability-zone | sed -e 's/[a-z]$//'` 134echo "-nfsv4,minorversion=1,oneopenown ${FS}.efs.${REGION}.amazonaws.com:/" 135EOF 136 chmod 755 ${DESTDIR}/etc/autofs/special_efs 137 metalog_add_data ./etc/autofs/special_efs 0755 138 139 return 0 140} 141 142ec2_base_networking () { 143 # EC2 instances use DHCP to get their network configuration. IPv6 144 # requires accept_rtadv. 145 echo 'ifconfig_DEFAULT="SYNCDHCP accept_rtadv"' >> ${DESTDIR}/etc/rc.conf 146 147 # The EC2 DHCP server can be trusted to know whether an IP address is 148 # assigned to us; we don't need to ARP to check if anyone else is using 149 # the address before we start using it. 150 echo 'dhclient_arpwait="NO"' >> ${DESTDIR}/etc/rc.conf 151 152 # Enable IPv6 on all interfaces, and spawn DHCPv6 via rtsold 153 echo 'ipv6_activate_all_interfaces="YES"' >> ${DESTDIR}/etc/rc.conf 154 echo 'rtsold_enable="YES"' >> ${DESTDIR}/etc/rc.conf 155 echo 'rtsold_flags="-M /usr/local/libexec/rtsold-M -a"' >> ${DESTDIR}/etc/rc.conf 156 157 # Provide a script which rtsold can use to launch DHCPv6 158 mkdir -p ${DESTDIR}/usr/local/libexec 159 cat > ${DESTDIR}/usr/local/libexec/rtsold-M <<'EOF' 160#!/bin/sh 161 162/usr/local/sbin/dhclient -6 -nw -N -cf /dev/null $1 163EOF 164 chmod 755 ${DESTDIR}/usr/local/libexec/rtsold-M 165 metalog_add_data ./usr/local/libexec/rtsold-M 0755 166 167 return 0 168} 169