xref: /linux/drivers/power/supply/cw2015_battery.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Fuel gauge driver for CellWise 2013 / 2015
4  *
5  * Copyright (C) 2012, RockChip
6  * Copyright (C) 2020, Tobias Schramm
7  *
8  * Authors: xuhuicong <xhc@rock-chips.com>
9  * Authors: Tobias Schramm <t.schramm@manjaro.org>
10  */
11 
12 #include <linux/bits.h>
13 #include <linux/delay.h>
14 #include <linux/i2c.h>
15 #include <linux/gfp.h>
16 #include <linux/gpio/consumer.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/power_supply.h>
20 #include <linux/property.h>
21 #include <linux/regmap.h>
22 #include <linux/time.h>
23 #include <linux/workqueue.h>
24 #include <linux/devm-helpers.h>
25 
26 #define CW2015_SIZE_BATINFO		64
27 
28 #define CW2015_RESET_TRIES		5
29 
30 #define CW2015_REG_VERSION		0x00
31 #define CW2015_REG_VCELL		0x02
32 #define CW2015_REG_SOC			0x04
33 #define CW2015_REG_RRT_ALERT		0x06
34 #define CW2015_REG_CONFIG		0x08
35 #define CW2015_REG_MODE			0x0A
36 #define CW2015_REG_BATINFO		0x10
37 
38 #define CW2015_MODE_SLEEP_MASK		GENMASK(7, 6)
39 #define CW2015_MODE_SLEEP		(0x03 << 6)
40 #define CW2015_MODE_NORMAL		(0x00 << 6)
41 #define CW2015_MODE_QUICK_START		(0x03 << 4)
42 #define CW2015_MODE_RESTART		(0x0f << 0)
43 
44 #define CW2015_CONFIG_UPDATE_FLG	(0x01 << 1)
45 #define CW2015_ATHD(x)			((x) << 3)
46 #define CW2015_MASK_ATHD		GENMASK(7, 3)
47 #define CW2015_MASK_SOC			GENMASK(12, 0)
48 
49 /* reset gauge of no valid state of charge could be polled for 40s */
50 #define CW2015_BAT_SOC_ERROR_MS		(40 * MSEC_PER_SEC)
51 /* reset gauge if state of charge stuck for half an hour during charging */
52 #define CW2015_BAT_CHARGING_STUCK_MS	(1800 * MSEC_PER_SEC)
53 
54 /* poll interval from CellWise GPL Android driver example */
55 #define CW2015_DEFAULT_POLL_INTERVAL_MS		8000
56 
57 #define CW2015_AVERAGING_SAMPLES		3
58 
59 struct cw_battery {
60 	struct device *dev;
61 	struct workqueue_struct *battery_workqueue;
62 	struct delayed_work battery_delay_work;
63 	struct regmap *regmap;
64 	struct power_supply *rk_bat;
65 	struct power_supply_battery_info *battery;
66 	u8 *bat_profile;
67 
68 	bool charger_attached;
69 	bool battery_changed;
70 
71 	int soc;
72 	int voltage_mv;
73 	int status;
74 	int time_to_empty;
75 	int charge_count;
76 
77 	u32 poll_interval_ms;
78 	u8 alert_level;
79 
80 	unsigned int read_errors;
81 	unsigned int charge_stuck_cnt;
82 };
83 
cw_read_word(struct cw_battery * cw_bat,u8 reg,u16 * val)84 static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
85 {
86 	__be16 value;
87 	int ret;
88 
89 	ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
90 	if (ret)
91 		return ret;
92 
93 	*val = be16_to_cpu(value);
94 	return 0;
95 }
96 
cw_update_profile(struct cw_battery * cw_bat)97 static int cw_update_profile(struct cw_battery *cw_bat)
98 {
99 	int ret;
100 	unsigned int reg_val;
101 	u8 reset_val;
102 
103 	/* make sure gauge is not in sleep mode */
104 	ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
105 	if (ret)
106 		return ret;
107 
108 	reset_val = reg_val;
109 	if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
110 		dev_err(cw_bat->dev,
111 			"Gauge is in sleep mode, can't update battery info\n");
112 		return -EINVAL;
113 	}
114 
115 	/* write new battery info */
116 	ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
117 			       cw_bat->bat_profile,
118 			       CW2015_SIZE_BATINFO);
119 	if (ret)
120 		return ret;
121 
122 	/* set config update flag  */
123 	reg_val |= CW2015_CONFIG_UPDATE_FLG;
124 	reg_val &= ~CW2015_MASK_ATHD;
125 	reg_val |= CW2015_ATHD(cw_bat->alert_level);
126 	ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
127 	if (ret)
128 		return ret;
129 
130 	/* reset gauge to apply new battery profile */
131 	reset_val &= ~CW2015_MODE_RESTART;
132 	reg_val = reset_val | CW2015_MODE_RESTART;
133 	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
134 	if (ret)
135 		return ret;
136 
137 	/* wait for gauge to reset */
138 	msleep(20);
139 
140 	/* clear reset flag */
141 	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
142 	if (ret)
143 		return ret;
144 
145 	/* wait for gauge to become ready */
146 	ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
147 				       reg_val, reg_val <= 100,
148 				       10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
149 	if (ret)
150 		dev_err(cw_bat->dev,
151 			"Gauge did not become ready after profile upload\n");
152 	else
153 		dev_dbg(cw_bat->dev, "Battery profile updated\n");
154 
155 	return ret;
156 }
157 
cw_init(struct cw_battery * cw_bat)158 static int cw_init(struct cw_battery *cw_bat)
159 {
160 	int ret;
161 	unsigned int reg_val = CW2015_MODE_SLEEP;
162 
163 	if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
164 		reg_val = CW2015_MODE_NORMAL;
165 		ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
166 		if (ret)
167 			return ret;
168 	}
169 
170 	ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
171 	if (ret)
172 		return ret;
173 
174 	if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
175 		dev_dbg(cw_bat->dev, "Setting new alert level\n");
176 		reg_val &= ~CW2015_MASK_ATHD;
177 		reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
178 		ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
179 		if (ret)
180 			return ret;
181 	}
182 
183 	ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
184 	if (ret)
185 		return ret;
186 
187 	if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
188 		dev_dbg(cw_bat->dev,
189 			"Battery profile not present, uploading battery profile\n");
190 		if (cw_bat->bat_profile) {
191 			ret = cw_update_profile(cw_bat);
192 			if (ret) {
193 				dev_err(cw_bat->dev,
194 					"Failed to upload battery profile\n");
195 				return ret;
196 			}
197 		} else {
198 			dev_warn(cw_bat->dev,
199 				 "No profile specified, continuing without profile\n");
200 		}
201 	} else if (cw_bat->bat_profile) {
202 		u8 bat_info[CW2015_SIZE_BATINFO];
203 
204 		ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
205 				      bat_info, CW2015_SIZE_BATINFO);
206 		if (ret) {
207 			dev_err(cw_bat->dev,
208 				"Failed to read stored battery profile\n");
209 			return ret;
210 		}
211 
212 		if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
213 			dev_warn(cw_bat->dev, "Replacing stored battery profile\n");
214 			ret = cw_update_profile(cw_bat);
215 			if (ret)
216 				return ret;
217 		}
218 	} else {
219 		dev_warn(cw_bat->dev,
220 			 "Can't check current battery profile, no profile provided\n");
221 	}
222 
223 	dev_dbg(cw_bat->dev, "Battery profile configured\n");
224 	return 0;
225 }
226 
cw_power_on_reset(struct cw_battery * cw_bat)227 static int cw_power_on_reset(struct cw_battery *cw_bat)
228 {
229 	int ret;
230 	unsigned char reset_val;
231 
232 	reset_val = CW2015_MODE_SLEEP;
233 	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
234 	if (ret)
235 		return ret;
236 
237 	/* wait for gauge to enter sleep */
238 	msleep(20);
239 
240 	reset_val = CW2015_MODE_NORMAL;
241 	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
242 	if (ret)
243 		return ret;
244 
245 	ret = cw_init(cw_bat);
246 	if (ret)
247 		return ret;
248 	return 0;
249 }
250 
251 #define HYSTERESIS(current, previous, up, down) \
252 	(((current) < (previous) + (up)) && ((current) > (previous) - (down)))
253 
cw_get_soc(struct cw_battery * cw_bat)254 static int cw_get_soc(struct cw_battery *cw_bat)
255 {
256 	unsigned int soc;
257 	int ret;
258 
259 	ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
260 	if (ret)
261 		return ret;
262 
263 	if (soc > 100) {
264 		int max_error_cycles =
265 			CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
266 
267 		dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc);
268 		cw_bat->read_errors++;
269 		if (cw_bat->read_errors > max_error_cycles) {
270 			dev_warn(cw_bat->dev,
271 				 "Too many invalid SoC reports, resetting gauge\n");
272 			cw_power_on_reset(cw_bat);
273 			cw_bat->read_errors = 0;
274 		}
275 		return cw_bat->soc;
276 	}
277 	cw_bat->read_errors = 0;
278 
279 	/* Reset gauge if stuck while charging */
280 	if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
281 		int max_stuck_cycles =
282 			CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
283 
284 		cw_bat->charge_stuck_cnt++;
285 		if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
286 			dev_warn(cw_bat->dev,
287 				 "SoC stuck @%u%%, resetting gauge\n", soc);
288 			cw_power_on_reset(cw_bat);
289 			cw_bat->charge_stuck_cnt = 0;
290 		}
291 	} else {
292 		cw_bat->charge_stuck_cnt = 0;
293 	}
294 
295 	/* Ignore voltage dips during charge */
296 	if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
297 		soc = cw_bat->soc;
298 
299 	/* Ignore voltage spikes during discharge */
300 	if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
301 		soc = cw_bat->soc;
302 
303 	return soc;
304 }
305 
cw_get_voltage(struct cw_battery * cw_bat)306 static int cw_get_voltage(struct cw_battery *cw_bat)
307 {
308 	int ret, i, voltage_mv;
309 	u16 reg_val;
310 	u32 avg = 0;
311 
312 	for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
313 		ret = cw_read_word(cw_bat, CW2015_REG_VCELL, &reg_val);
314 		if (ret)
315 			return ret;
316 
317 		avg += reg_val;
318 	}
319 	avg /= CW2015_AVERAGING_SAMPLES;
320 
321 	/*
322 	 * 305 uV per ADC step
323 	 * Use 312 / 1024  as efficient approximation of 305 / 1000
324 	 * Negligible error of 0.1%
325 	 */
326 	voltage_mv = avg * 312 / 1024;
327 
328 	dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
329 		voltage_mv, reg_val);
330 	return voltage_mv;
331 }
332 
cw_get_time_to_empty(struct cw_battery * cw_bat)333 static int cw_get_time_to_empty(struct cw_battery *cw_bat)
334 {
335 	int ret;
336 	u16 value16;
337 
338 	ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
339 	if (ret)
340 		return ret;
341 
342 	return value16 & CW2015_MASK_SOC;
343 }
344 
cw_update_charge_status(struct cw_battery * cw_bat)345 static void cw_update_charge_status(struct cw_battery *cw_bat)
346 {
347 	int ret;
348 
349 	ret = power_supply_am_i_supplied(cw_bat->rk_bat);
350 	if (ret < 0) {
351 		dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret);
352 	} else {
353 		bool charger_attached;
354 
355 		charger_attached = !!ret;
356 		if (cw_bat->charger_attached != charger_attached) {
357 			cw_bat->battery_changed = true;
358 			if (charger_attached)
359 				cw_bat->charge_count++;
360 		}
361 		cw_bat->charger_attached = charger_attached;
362 	}
363 }
364 
cw_update_soc(struct cw_battery * cw_bat)365 static void cw_update_soc(struct cw_battery *cw_bat)
366 {
367 	int soc;
368 
369 	soc = cw_get_soc(cw_bat);
370 	if (soc < 0)
371 		dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc);
372 	else if (cw_bat->soc != soc) {
373 		cw_bat->soc = soc;
374 		cw_bat->battery_changed = true;
375 	}
376 }
377 
cw_update_voltage(struct cw_battery * cw_bat)378 static void cw_update_voltage(struct cw_battery *cw_bat)
379 {
380 	int voltage_mv;
381 
382 	voltage_mv = cw_get_voltage(cw_bat);
383 	if (voltage_mv < 0)
384 		dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n",
385 			voltage_mv);
386 	else
387 		cw_bat->voltage_mv = voltage_mv;
388 }
389 
cw_update_status(struct cw_battery * cw_bat)390 static void cw_update_status(struct cw_battery *cw_bat)
391 {
392 	int status = POWER_SUPPLY_STATUS_DISCHARGING;
393 
394 	if (cw_bat->charger_attached) {
395 		if (cw_bat->soc >= 100)
396 			status = POWER_SUPPLY_STATUS_FULL;
397 		else
398 			status = POWER_SUPPLY_STATUS_CHARGING;
399 	}
400 
401 	if (cw_bat->status != status)
402 		cw_bat->battery_changed = true;
403 	cw_bat->status = status;
404 }
405 
cw_update_time_to_empty(struct cw_battery * cw_bat)406 static void cw_update_time_to_empty(struct cw_battery *cw_bat)
407 {
408 	int time_to_empty;
409 
410 	time_to_empty = cw_get_time_to_empty(cw_bat);
411 	if (time_to_empty < 0)
412 		dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n",
413 			time_to_empty);
414 	else if (cw_bat->time_to_empty != time_to_empty) {
415 		cw_bat->time_to_empty = time_to_empty;
416 		cw_bat->battery_changed = true;
417 	}
418 }
419 
cw_bat_work(struct work_struct * work)420 static void cw_bat_work(struct work_struct *work)
421 {
422 	struct delayed_work *delay_work;
423 	struct cw_battery *cw_bat;
424 	int ret;
425 	unsigned int reg_val;
426 
427 	delay_work = to_delayed_work(work);
428 	cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
429 	ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
430 	if (ret) {
431 		dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret);
432 	} else {
433 		if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
434 			int i;
435 
436 			for (i = 0; i < CW2015_RESET_TRIES; i++) {
437 				if (!cw_power_on_reset(cw_bat))
438 					break;
439 			}
440 		}
441 		cw_update_soc(cw_bat);
442 		cw_update_voltage(cw_bat);
443 		cw_update_charge_status(cw_bat);
444 		cw_update_status(cw_bat);
445 		cw_update_time_to_empty(cw_bat);
446 	}
447 	dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached);
448 	dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status);
449 	dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc);
450 	dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv);
451 
452 	if (cw_bat->battery_changed)
453 		power_supply_changed(cw_bat->rk_bat);
454 	cw_bat->battery_changed = false;
455 
456 	queue_delayed_work(cw_bat->battery_workqueue,
457 			   &cw_bat->battery_delay_work,
458 			   msecs_to_jiffies(cw_bat->poll_interval_ms));
459 }
460 
cw_battery_valid_time_to_empty(struct cw_battery * cw_bat)461 static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
462 {
463 	return	cw_bat->time_to_empty > 0 &&
464 		cw_bat->time_to_empty < CW2015_MASK_SOC &&
465 		cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
466 }
467 
cw_battery_get_property(struct power_supply * psy,enum power_supply_property psp,union power_supply_propval * val)468 static int cw_battery_get_property(struct power_supply *psy,
469 				   enum power_supply_property psp,
470 				   union power_supply_propval *val)
471 {
472 	struct cw_battery *cw_bat;
473 
474 	cw_bat = power_supply_get_drvdata(psy);
475 	switch (psp) {
476 	case POWER_SUPPLY_PROP_CAPACITY:
477 		val->intval = cw_bat->soc;
478 		break;
479 
480 	case POWER_SUPPLY_PROP_STATUS:
481 		val->intval = cw_bat->status;
482 		break;
483 
484 	case POWER_SUPPLY_PROP_PRESENT:
485 		val->intval = !!cw_bat->voltage_mv;
486 		break;
487 
488 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
489 		val->intval = cw_bat->voltage_mv * 1000;
490 		break;
491 
492 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
493 		if (cw_battery_valid_time_to_empty(cw_bat))
494 			val->intval = cw_bat->time_to_empty * 60;
495 		else
496 			val->intval = 0;
497 		break;
498 
499 	case POWER_SUPPLY_PROP_TECHNOLOGY:
500 		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
501 		break;
502 
503 	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
504 		val->intval = cw_bat->charge_count;
505 		break;
506 
507 	case POWER_SUPPLY_PROP_CHARGE_FULL:
508 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
509 		if (cw_bat->battery->charge_full_design_uah > 0)
510 			val->intval = cw_bat->battery->charge_full_design_uah;
511 		else
512 			val->intval = 0;
513 		break;
514 
515 	case POWER_SUPPLY_PROP_CHARGE_NOW:
516 		val->intval = cw_bat->battery->charge_full_design_uah;
517 		val->intval = val->intval * cw_bat->soc / 100;
518 		break;
519 
520 	case POWER_SUPPLY_PROP_CURRENT_NOW:
521 		if (cw_battery_valid_time_to_empty(cw_bat) &&
522 		    cw_bat->battery->charge_full_design_uah > 0) {
523 			/* calculate remaining capacity */
524 			val->intval = cw_bat->battery->charge_full_design_uah;
525 			val->intval = val->intval * cw_bat->soc / 100;
526 
527 			/* estimate current based on time to empty */
528 			val->intval = 60 * val->intval / cw_bat->time_to_empty;
529 		} else {
530 			val->intval = 0;
531 		}
532 
533 		break;
534 
535 	default:
536 		break;
537 	}
538 	return 0;
539 }
540 
541 static enum power_supply_property cw_battery_properties[] = {
542 	POWER_SUPPLY_PROP_CAPACITY,
543 	POWER_SUPPLY_PROP_STATUS,
544 	POWER_SUPPLY_PROP_PRESENT,
545 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
546 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
547 	POWER_SUPPLY_PROP_TECHNOLOGY,
548 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
549 	POWER_SUPPLY_PROP_CHARGE_FULL,
550 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
551 	POWER_SUPPLY_PROP_CHARGE_NOW,
552 	POWER_SUPPLY_PROP_CURRENT_NOW,
553 };
554 
555 static const struct power_supply_desc cw2015_bat_desc = {
556 	.name		= "cw2015-battery",
557 	.type		= POWER_SUPPLY_TYPE_BATTERY,
558 	.properties	= cw_battery_properties,
559 	.num_properties	= ARRAY_SIZE(cw_battery_properties),
560 	.get_property	= cw_battery_get_property,
561 };
562 
cw2015_parse_properties(struct cw_battery * cw_bat)563 static int cw2015_parse_properties(struct cw_battery *cw_bat)
564 {
565 	struct device *dev = cw_bat->dev;
566 	int length;
567 	int ret;
568 
569 	length = device_property_count_u8(dev, "cellwise,battery-profile");
570 	if (length < 0) {
571 		dev_warn(cw_bat->dev,
572 			 "No battery-profile found, using current flash contents\n");
573 	} else if (length != CW2015_SIZE_BATINFO) {
574 		dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
575 			CW2015_SIZE_BATINFO);
576 		return -EINVAL;
577 	} else {
578 		cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
579 		if (!cw_bat->bat_profile)
580 			return -ENOMEM;
581 
582 		ret = device_property_read_u8_array(dev,
583 						"cellwise,battery-profile",
584 						cw_bat->bat_profile,
585 						length);
586 		if (ret)
587 			return ret;
588 	}
589 
590 	ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms",
591 				       &cw_bat->poll_interval_ms);
592 	if (ret) {
593 		dev_dbg(cw_bat->dev, "Using default poll interval\n");
594 		cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
595 	}
596 
597 	return 0;
598 }
599 
600 static const struct regmap_range regmap_ranges_rd_yes[] = {
601 	regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
602 	regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
603 	regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
604 	regmap_reg_range(CW2015_REG_BATINFO,
605 			CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
606 };
607 
608 static const struct regmap_access_table regmap_rd_table = {
609 	.yes_ranges = regmap_ranges_rd_yes,
610 	.n_yes_ranges = 4,
611 };
612 
613 static const struct regmap_range regmap_ranges_wr_yes[] = {
614 	regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
615 	regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
616 	regmap_reg_range(CW2015_REG_BATINFO,
617 			CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
618 };
619 
620 static const struct regmap_access_table regmap_wr_table = {
621 	.yes_ranges = regmap_ranges_wr_yes,
622 	.n_yes_ranges = 3,
623 };
624 
625 static const struct regmap_range regmap_ranges_vol_yes[] = {
626 	regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
627 };
628 
629 static const struct regmap_access_table regmap_vol_table = {
630 	.yes_ranges = regmap_ranges_vol_yes,
631 	.n_yes_ranges = 1,
632 };
633 
634 static const struct regmap_config cw2015_regmap_config = {
635 	.reg_bits = 8,
636 	.val_bits = 8,
637 	.rd_table = &regmap_rd_table,
638 	.wr_table = &regmap_wr_table,
639 	.volatile_table = &regmap_vol_table,
640 	.max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
641 };
642 
cw_bat_probe(struct i2c_client * client)643 static int cw_bat_probe(struct i2c_client *client)
644 {
645 	int ret;
646 	struct cw_battery *cw_bat;
647 	struct power_supply_config psy_cfg = { 0 };
648 
649 	cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
650 	if (!cw_bat)
651 		return -ENOMEM;
652 
653 	i2c_set_clientdata(client, cw_bat);
654 	cw_bat->dev = &client->dev;
655 	cw_bat->soc = 1;
656 
657 	ret = cw2015_parse_properties(cw_bat);
658 	if (ret) {
659 		dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n");
660 		return ret;
661 	}
662 
663 	cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
664 	if (IS_ERR(cw_bat->regmap)) {
665 		dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n",
666 			PTR_ERR(cw_bat->regmap));
667 		return PTR_ERR(cw_bat->regmap);
668 	}
669 
670 	ret = cw_init(cw_bat);
671 	if (ret) {
672 		dev_err(cw_bat->dev, "Init failed: %d\n", ret);
673 		return ret;
674 	}
675 
676 	psy_cfg.drv_data = cw_bat;
677 	psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
678 
679 	cw_bat->rk_bat = devm_power_supply_register(&client->dev,
680 						    &cw2015_bat_desc,
681 						    &psy_cfg);
682 	if (IS_ERR(cw_bat->rk_bat)) {
683 		/* try again if this happens */
684 		dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat),
685 			"Failed to register power supply\n");
686 		return PTR_ERR(cw_bat->rk_bat);
687 	}
688 
689 	ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
690 	if (ret) {
691 		/* Allocate an empty battery */
692 		cw_bat->battery = devm_kzalloc(&client->dev,
693 					       sizeof(*cw_bat->battery),
694 					       GFP_KERNEL);
695 		if (!cw_bat->battery)
696 			return -ENOMEM;
697 		dev_warn(cw_bat->dev,
698 			 "No monitored battery, some properties will be missing\n");
699 	}
700 
701 	cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
702 	if (!cw_bat->battery_workqueue)
703 		return -ENOMEM;
704 
705 	devm_delayed_work_autocancel(&client->dev,
706 							  &cw_bat->battery_delay_work, cw_bat_work);
707 	queue_delayed_work(cw_bat->battery_workqueue,
708 			   &cw_bat->battery_delay_work, msecs_to_jiffies(10));
709 	return 0;
710 }
711 
cw_bat_suspend(struct device * dev)712 static int __maybe_unused cw_bat_suspend(struct device *dev)
713 {
714 	struct i2c_client *client = to_i2c_client(dev);
715 	struct cw_battery *cw_bat = i2c_get_clientdata(client);
716 
717 	cancel_delayed_work_sync(&cw_bat->battery_delay_work);
718 	return 0;
719 }
720 
cw_bat_resume(struct device * dev)721 static int __maybe_unused cw_bat_resume(struct device *dev)
722 {
723 	struct i2c_client *client = to_i2c_client(dev);
724 	struct cw_battery *cw_bat = i2c_get_clientdata(client);
725 
726 	queue_delayed_work(cw_bat->battery_workqueue,
727 			   &cw_bat->battery_delay_work, 0);
728 	return 0;
729 }
730 
731 static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
732 
733 static const struct i2c_device_id cw_bat_id_table[] = {
734 	{ "cw2015" },
735 	{ }
736 };
737 
738 static const struct of_device_id cw2015_of_match[] = {
739 	{ .compatible = "cellwise,cw2015" },
740 	{ }
741 };
742 MODULE_DEVICE_TABLE(of, cw2015_of_match);
743 
744 static struct i2c_driver cw_bat_driver = {
745 	.driver = {
746 		.name = "cw2015",
747 		.of_match_table = cw2015_of_match,
748 		.pm = &cw_bat_pm_ops,
749 	},
750 	.probe = cw_bat_probe,
751 	.id_table = cw_bat_id_table,
752 };
753 
754 module_i2c_driver(cw_bat_driver);
755 
756 MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
757 MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
758 MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
759 MODULE_LICENSE("GPL");
760