1 /* $OpenBSD: clientloop.c,v 1.410 2024/12/03 22:30:03 jsg Exp $ */
2 /*
3 * Author: Tatu Ylonen <ylo@cs.hut.fi>
4 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5 * All rights reserved
6 * The main loop for the interactive session (client side).
7 *
8 * As far as I am concerned, the code I have written for this software
9 * can be used freely for any purpose. Any derived versions of this
10 * software must be clearly marked as such, and if the derived work is
11 * incompatible with the protocol description in the RFC file, it must be
12 * called by a name other than "ssh" or "Secure Shell".
13 *
14 *
15 * Copyright (c) 1999 Theo de Raadt. All rights reserved.
16 *
17 * Redistribution and use in source and binary forms, with or without
18 * modification, are permitted provided that the following conditions
19 * are met:
20 * 1. Redistributions of source code must retain the above copyright
21 * notice, this list of conditions and the following disclaimer.
22 * 2. Redistributions in binary form must reproduce the above copyright
23 * notice, this list of conditions and the following disclaimer in the
24 * documentation and/or other materials provided with the distribution.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
27 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
28 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
29 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
30 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
31 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
32 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
33 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
34 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
35 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 *
37 *
38 * SSH2 support added by Markus Friedl.
39 * Copyright (c) 1999, 2000, 2001 Markus Friedl. All rights reserved.
40 *
41 * Redistribution and use in source and binary forms, with or without
42 * modification, are permitted provided that the following conditions
43 * are met:
44 * 1. Redistributions of source code must retain the above copyright
45 * notice, this list of conditions and the following disclaimer.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 *
50 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
51 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
52 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
53 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
54 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
55 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
56 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
57 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
58 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
59 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
60 */
61
62 #include "includes.h"
63
64 #include <sys/types.h>
65 #include <sys/ioctl.h>
66 #ifdef HAVE_SYS_STAT_H
67 # include <sys/stat.h>
68 #endif
69 #ifdef HAVE_SYS_TIME_H
70 # include <sys/time.h>
71 #endif
72 #include <sys/socket.h>
73
74 #include <ctype.h>
75 #include <errno.h>
76 #ifdef HAVE_PATHS_H
77 #include <paths.h>
78 #endif
79 #ifdef HAVE_POLL_H
80 #include <poll.h>
81 #endif
82 #include <signal.h>
83 #include <stdio.h>
84 #include <stdlib.h>
85 #include <string.h>
86 #include <stdarg.h>
87 #include <termios.h>
88 #include <pwd.h>
89 #include <unistd.h>
90 #include <limits.h>
91
92 #include "openbsd-compat/sys-queue.h"
93 #include "xmalloc.h"
94 #include "ssh.h"
95 #include "ssh2.h"
96 #include "packet.h"
97 #include "sshbuf.h"
98 #include "compat.h"
99 #include "channels.h"
100 #include "dispatch.h"
101 #include "sshkey.h"
102 #include "cipher.h"
103 #include "kex.h"
104 #include "myproposal.h"
105 #include "log.h"
106 #include "misc.h"
107 #include "readconf.h"
108 #include "clientloop.h"
109 #include "sshconnect.h"
110 #include "authfd.h"
111 #include "atomicio.h"
112 #include "sshpty.h"
113 #include "match.h"
114 #include "msg.h"
115 #include "ssherr.h"
116 #include "hostfile.h"
117
118 /* Permitted RSA signature algorithms for UpdateHostkeys proofs */
119 #define HOSTKEY_PROOF_RSA_ALGS "rsa-sha2-512,rsa-sha2-256"
120
121 /* Uncertainty (in percent) of keystroke timing intervals */
122 #define SSH_KEYSTROKE_TIMING_FUZZ 10
123
124 /* import options */
125 extern Options options;
126
127 /* Control socket */
128 extern int muxserver_sock; /* XXX use mux_client_cleanup() instead */
129
130 /*
131 * Name of the host we are connecting to. This is the name given on the
132 * command line, or the Hostname specified for the user-supplied name in a
133 * configuration file.
134 */
135 extern char *host;
136
137 /*
138 * If this field is not NULL, the ForwardAgent socket is this path and different
139 * instead of SSH_AUTH_SOCK.
140 */
141 extern char *forward_agent_sock_path;
142
143 /*
144 * Flag to indicate that we have received a window change signal which has
145 * not yet been processed. This will cause a message indicating the new
146 * window size to be sent to the server a little later. This is volatile
147 * because this is updated in a signal handler.
148 */
149 static volatile sig_atomic_t received_window_change_signal = 0;
150 static volatile sig_atomic_t received_signal = 0;
151
152 /* Time when backgrounded control master using ControlPersist should exit */
153 static time_t control_persist_exit_time = 0;
154
155 /* Common data for the client loop code. */
156 volatile sig_atomic_t quit_pending; /* Set non-zero to quit the loop. */
157 static int last_was_cr; /* Last character was a newline. */
158 static int exit_status; /* Used to store the command exit status. */
159 static int connection_in; /* Connection to server (input). */
160 static int connection_out; /* Connection to server (output). */
161 static int need_rekeying; /* Set to non-zero if rekeying is requested. */
162 static int session_closed; /* In SSH2: login session closed. */
163 static time_t x11_refuse_time; /* If >0, refuse x11 opens after this time. */
164 static time_t server_alive_time; /* Time to do server_alive_check */
165 static int hostkeys_update_complete;
166 static int session_setup_complete;
167
168 static void client_init_dispatch(struct ssh *ssh);
169 int session_ident = -1;
170
171 /* Track escape per proto2 channel */
172 struct escape_filter_ctx {
173 int escape_pending;
174 int escape_char;
175 };
176
177 /* Context for channel confirmation replies */
178 struct channel_reply_ctx {
179 const char *request_type;
180 int id;
181 enum confirm_action action;
182 };
183
184 /* Global request success/failure callbacks */
185 /* XXX move to struct ssh? */
186 struct global_confirm {
187 TAILQ_ENTRY(global_confirm) entry;
188 global_confirm_cb *cb;
189 void *ctx;
190 int ref_count;
191 };
192 TAILQ_HEAD(global_confirms, global_confirm);
193 static struct global_confirms global_confirms =
194 TAILQ_HEAD_INITIALIZER(global_confirms);
195
196 static void quit_message(const char *fmt, ...)
197 __attribute__((__format__ (printf, 1, 2)));
198
199 static void
quit_message(const char * fmt,...)200 quit_message(const char *fmt, ...)
201 {
202 char *msg, *fmt2;
203 va_list args;
204 xasprintf(&fmt2, "%s\r\n", fmt);
205
206 va_start(args, fmt);
207 xvasprintf(&msg, fmt2, args);
208 va_end(args);
209
210 (void)atomicio(vwrite, STDERR_FILENO, msg, strlen(msg));
211 free(msg);
212 free(fmt2);
213
214 quit_pending = 1;
215 }
216
217 /*
218 * Signal handler for the window change signal (SIGWINCH). This just sets a
219 * flag indicating that the window has changed.
220 */
221 static void
window_change_handler(int sig)222 window_change_handler(int sig)
223 {
224 received_window_change_signal = 1;
225 }
226
227 /*
228 * Signal handler for signals that cause the program to terminate. These
229 * signals must be trapped to restore terminal modes.
230 */
231 static void
signal_handler(int sig)232 signal_handler(int sig)
233 {
234 received_signal = sig;
235 quit_pending = 1;
236 }
237
238 /*
239 * Sets control_persist_exit_time to the absolute time when the
240 * backgrounded control master should exit due to expiry of the
241 * ControlPersist timeout. Sets it to 0 if we are not a backgrounded
242 * control master process, or if there is no ControlPersist timeout.
243 */
244 static void
set_control_persist_exit_time(struct ssh * ssh)245 set_control_persist_exit_time(struct ssh *ssh)
246 {
247 if (muxserver_sock == -1 || !options.control_persist
248 || options.control_persist_timeout == 0) {
249 /* not using a ControlPersist timeout */
250 control_persist_exit_time = 0;
251 } else if (channel_still_open(ssh)) {
252 /* some client connections are still open */
253 if (control_persist_exit_time > 0)
254 debug2_f("cancel scheduled exit");
255 control_persist_exit_time = 0;
256 } else if (control_persist_exit_time <= 0) {
257 /* a client connection has recently closed */
258 control_persist_exit_time = monotime() +
259 (time_t)options.control_persist_timeout;
260 debug2_f("schedule exit in %d seconds",
261 options.control_persist_timeout);
262 }
263 /* else we are already counting down to the timeout */
264 }
265
266 #define SSH_X11_VALID_DISPLAY_CHARS ":/.-_"
267 static int
client_x11_display_valid(const char * display)268 client_x11_display_valid(const char *display)
269 {
270 size_t i, dlen;
271
272 if (display == NULL)
273 return 0;
274
275 dlen = strlen(display);
276 for (i = 0; i < dlen; i++) {
277 if (!isalnum((u_char)display[i]) &&
278 strchr(SSH_X11_VALID_DISPLAY_CHARS, display[i]) == NULL) {
279 debug("Invalid character '%c' in DISPLAY", display[i]);
280 return 0;
281 }
282 }
283 return 1;
284 }
285
286 #define SSH_X11_PROTO "MIT-MAGIC-COOKIE-1"
287 #define X11_TIMEOUT_SLACK 60
288 int
client_x11_get_proto(struct ssh * ssh,const char * display,const char * xauth_path,u_int trusted,u_int timeout,char ** _proto,char ** _data)289 client_x11_get_proto(struct ssh *ssh, const char *display,
290 const char *xauth_path, u_int trusted, u_int timeout,
291 char **_proto, char **_data)
292 {
293 char *cmd, line[512], xdisplay[512];
294 char xauthfile[PATH_MAX], xauthdir[PATH_MAX];
295 static char proto[512], data[512];
296 FILE *f;
297 int got_data = 0, generated = 0, do_unlink = 0, r;
298 struct stat st;
299 u_int now, x11_timeout_real;
300
301 *_proto = proto;
302 *_data = data;
303 proto[0] = data[0] = xauthfile[0] = xauthdir[0] = '\0';
304
305 if (!client_x11_display_valid(display)) {
306 if (display != NULL)
307 logit("DISPLAY \"%s\" invalid; disabling X11 forwarding",
308 display);
309 return -1;
310 }
311 if (xauth_path != NULL && stat(xauth_path, &st) == -1) {
312 debug("No xauth program.");
313 xauth_path = NULL;
314 }
315
316 if (xauth_path != NULL) {
317 /*
318 * Handle FamilyLocal case where $DISPLAY does
319 * not match an authorization entry. For this we
320 * just try "xauth list unix:displaynum.screennum".
321 * XXX: "localhost" match to determine FamilyLocal
322 * is not perfect.
323 */
324 if (strncmp(display, "localhost:", 10) == 0) {
325 if ((r = snprintf(xdisplay, sizeof(xdisplay), "unix:%s",
326 display + 10)) < 0 ||
327 (size_t)r >= sizeof(xdisplay)) {
328 error_f("display name too long");
329 return -1;
330 }
331 display = xdisplay;
332 }
333 if (trusted == 0) {
334 /*
335 * Generate an untrusted X11 auth cookie.
336 *
337 * The authentication cookie should briefly outlive
338 * ssh's willingness to forward X11 connections to
339 * avoid nasty fail-open behaviour in the X server.
340 */
341 mktemp_proto(xauthdir, sizeof(xauthdir));
342 if (mkdtemp(xauthdir) == NULL) {
343 error_f("mkdtemp: %s", strerror(errno));
344 return -1;
345 }
346 do_unlink = 1;
347 if ((r = snprintf(xauthfile, sizeof(xauthfile),
348 "%s/xauthfile", xauthdir)) < 0 ||
349 (size_t)r >= sizeof(xauthfile)) {
350 error_f("xauthfile path too long");
351 rmdir(xauthdir);
352 return -1;
353 }
354
355 if (timeout == 0) {
356 /* auth doesn't time out */
357 xasprintf(&cmd, "%s -f %s generate %s %s "
358 "untrusted 2>%s",
359 xauth_path, xauthfile, display,
360 SSH_X11_PROTO, _PATH_DEVNULL);
361 } else {
362 /* Add some slack to requested expiry */
363 if (timeout < UINT_MAX - X11_TIMEOUT_SLACK)
364 x11_timeout_real = timeout +
365 X11_TIMEOUT_SLACK;
366 else {
367 /* Don't overflow on long timeouts */
368 x11_timeout_real = UINT_MAX;
369 }
370 xasprintf(&cmd, "%s -f %s generate %s %s "
371 "untrusted timeout %u 2>%s",
372 xauth_path, xauthfile, display,
373 SSH_X11_PROTO, x11_timeout_real,
374 _PATH_DEVNULL);
375 }
376 debug2_f("xauth command: %s", cmd);
377
378 if (timeout != 0 && x11_refuse_time == 0) {
379 now = monotime() + 1;
380 if (SSH_TIME_T_MAX - timeout < now)
381 x11_refuse_time = SSH_TIME_T_MAX;
382 else
383 x11_refuse_time = now + timeout;
384 channel_set_x11_refuse_time(ssh,
385 x11_refuse_time);
386 }
387 if (system(cmd) == 0)
388 generated = 1;
389 free(cmd);
390 }
391
392 /*
393 * When in untrusted mode, we read the cookie only if it was
394 * successfully generated as an untrusted one in the step
395 * above.
396 */
397 if (trusted || generated) {
398 xasprintf(&cmd,
399 "%s %s%s list %s 2>" _PATH_DEVNULL,
400 xauth_path,
401 generated ? "-f " : "" ,
402 generated ? xauthfile : "",
403 display);
404 debug2("x11_get_proto: %s", cmd);
405 f = popen(cmd, "r");
406 if (f && fgets(line, sizeof(line), f) &&
407 sscanf(line, "%*s %511s %511s", proto, data) == 2)
408 got_data = 1;
409 if (f)
410 pclose(f);
411 free(cmd);
412 }
413 }
414
415 if (do_unlink) {
416 unlink(xauthfile);
417 rmdir(xauthdir);
418 }
419
420 /* Don't fall back to fake X11 data for untrusted forwarding */
421 if (!trusted && !got_data) {
422 error("Warning: untrusted X11 forwarding setup failed: "
423 "xauth key data not generated");
424 return -1;
425 }
426
427 /*
428 * If we didn't get authentication data, just make up some
429 * data. The forwarding code will check the validity of the
430 * response anyway, and substitute this data. The X11
431 * server, however, will ignore this fake data and use
432 * whatever authentication mechanisms it was using otherwise
433 * for the local connection.
434 */
435 if (!got_data) {
436 u_int8_t rnd[16];
437 u_int i;
438
439 logit("Warning: No xauth data; "
440 "using fake authentication data for X11 forwarding.");
441 strlcpy(proto, SSH_X11_PROTO, sizeof proto);
442 arc4random_buf(rnd, sizeof(rnd));
443 for (i = 0; i < sizeof(rnd); i++) {
444 snprintf(data + 2 * i, sizeof data - 2 * i, "%02x",
445 rnd[i]);
446 }
447 }
448
449 return 0;
450 }
451
452 /*
453 * Checks if the client window has changed, and sends a packet about it to
454 * the server if so. The actual change is detected elsewhere (by a software
455 * interrupt on Unix); this just checks the flag and sends a message if
456 * appropriate.
457 */
458
459 static void
client_check_window_change(struct ssh * ssh)460 client_check_window_change(struct ssh *ssh)
461 {
462 if (!received_window_change_signal)
463 return;
464 received_window_change_signal = 0;
465 debug2_f("changed");
466 channel_send_window_changes(ssh);
467 }
468
469 static int
client_global_request_reply(int type,u_int32_t seq,struct ssh * ssh)470 client_global_request_reply(int type, u_int32_t seq, struct ssh *ssh)
471 {
472 struct global_confirm *gc;
473
474 if ((gc = TAILQ_FIRST(&global_confirms)) == NULL)
475 return 0;
476 if (gc->cb != NULL)
477 gc->cb(ssh, type, seq, gc->ctx);
478 if (--gc->ref_count <= 0) {
479 TAILQ_REMOVE(&global_confirms, gc, entry);
480 freezero(gc, sizeof(*gc));
481 }
482
483 ssh_packet_set_alive_timeouts(ssh, 0);
484 return 0;
485 }
486
487 static void
schedule_server_alive_check(void)488 schedule_server_alive_check(void)
489 {
490 if (options.server_alive_interval > 0)
491 server_alive_time = monotime() + options.server_alive_interval;
492 }
493
494 static void
server_alive_check(struct ssh * ssh)495 server_alive_check(struct ssh *ssh)
496 {
497 int r;
498
499 if (ssh_packet_inc_alive_timeouts(ssh) > options.server_alive_count_max) {
500 logit("Timeout, server %s not responding.", host);
501 cleanup_exit(255);
502 }
503 if ((r = sshpkt_start(ssh, SSH2_MSG_GLOBAL_REQUEST)) != 0 ||
504 (r = sshpkt_put_cstring(ssh, "keepalive@openssh.com")) != 0 ||
505 (r = sshpkt_put_u8(ssh, 1)) != 0 || /* boolean: want reply */
506 (r = sshpkt_send(ssh)) != 0)
507 fatal_fr(r, "send packet");
508 /* Insert an empty placeholder to maintain ordering */
509 client_register_global_confirm(NULL, NULL);
510 schedule_server_alive_check();
511 }
512
513 /* Try to send a dummy keystroke */
514 static int
send_chaff(struct ssh * ssh)515 send_chaff(struct ssh *ssh)
516 {
517 int r;
518
519 if (ssh->kex == NULL || (ssh->kex->flags & KEX_HAS_PING) == 0)
520 return 0;
521 /* XXX probabilistically send chaff? */
522 /*
523 * a SSH2_MSG_CHANNEL_DATA payload is 9 bytes:
524 * 4 bytes channel ID + 4 bytes string length + 1 byte string data
525 * simulate that here.
526 */
527 if ((r = sshpkt_start(ssh, SSH2_MSG_PING)) != 0 ||
528 (r = sshpkt_put_cstring(ssh, "PING!")) != 0 ||
529 (r = sshpkt_send(ssh)) != 0)
530 fatal_fr(r, "send packet");
531 return 1;
532 }
533
534 /* Sets the next interval to send a keystroke or chaff packet */
535 static void
set_next_interval(const struct timespec * now,struct timespec * next_interval,u_int interval_ms,int starting)536 set_next_interval(const struct timespec *now, struct timespec *next_interval,
537 u_int interval_ms, int starting)
538 {
539 struct timespec tmp;
540 long long interval_ns, fuzz_ns;
541 static long long rate_fuzz;
542
543 interval_ns = interval_ms * (1000LL * 1000);
544 fuzz_ns = (interval_ns * SSH_KEYSTROKE_TIMING_FUZZ) / 100;
545 /* Center fuzz around requested interval */
546 if (fuzz_ns > INT_MAX)
547 fuzz_ns = INT_MAX;
548 if (fuzz_ns > interval_ns) {
549 /* Shouldn't happen */
550 fatal_f("internal error: fuzz %u%% %lldns > interval %lldns",
551 SSH_KEYSTROKE_TIMING_FUZZ, fuzz_ns, interval_ns);
552 }
553 /*
554 * Randomise the keystroke/chaff intervals in two ways:
555 * 1. Each interval has some random jitter applied to make the
556 * interval-to-interval time unpredictable.
557 * 2. The overall interval rate is also randomly perturbed for each
558 * chaffing session to make the average rate unpredictable.
559 */
560 if (starting)
561 rate_fuzz = arc4random_uniform(fuzz_ns);
562 interval_ns -= fuzz_ns;
563 interval_ns += arc4random_uniform(fuzz_ns) + rate_fuzz;
564
565 tmp.tv_sec = interval_ns / (1000 * 1000 * 1000);
566 tmp.tv_nsec = interval_ns % (1000 * 1000 * 1000);
567
568 timespecadd(now, &tmp, next_interval);
569 }
570
571 /*
572 * Performs keystroke timing obfuscation. Returns non-zero if the
573 * output fd should be polled.
574 */
575 static int
obfuscate_keystroke_timing(struct ssh * ssh,struct timespec * timeout,int channel_did_enqueue)576 obfuscate_keystroke_timing(struct ssh *ssh, struct timespec *timeout,
577 int channel_did_enqueue)
578 {
579 static int active;
580 static struct timespec next_interval, chaff_until;
581 struct timespec now, tmp;
582 int just_started = 0, had_keystroke = 0;
583 static unsigned long long nchaff;
584 char *stop_reason = NULL;
585 long long n;
586
587 monotime_ts(&now);
588
589 if (options.obscure_keystroke_timing_interval <= 0)
590 return 1; /* disabled in config */
591
592 if (!channel_tty_open(ssh) || quit_pending) {
593 /* Stop if no channels left of we're waiting for one to close */
594 stop_reason = "no active channels";
595 } else if (ssh_packet_is_rekeying(ssh)) {
596 /* Stop if we're rekeying */
597 stop_reason = "rekeying started";
598 } else if (!ssh_packet_interactive_data_to_write(ssh) &&
599 ssh_packet_have_data_to_write(ssh)) {
600 /* Stop if the output buffer has more than a few keystrokes */
601 stop_reason = "output buffer filling";
602 } else if (active && channel_did_enqueue &&
603 ssh_packet_have_data_to_write(ssh)) {
604 /* Still in active mode and have a keystroke queued. */
605 had_keystroke = 1;
606 } else if (active) {
607 if (timespeccmp(&now, &chaff_until, >=)) {
608 /* Stop if there have been no keystrokes for a while */
609 stop_reason = "chaff time expired";
610 } else if (timespeccmp(&now, &next_interval, >=) &&
611 !ssh_packet_have_data_to_write(ssh)) {
612 /* If due to send but have no data, then send chaff */
613 if (send_chaff(ssh))
614 nchaff++;
615 }
616 }
617
618 if (stop_reason != NULL) {
619 if (active) {
620 debug3_f("stopping: %s (%llu chaff packets sent)",
621 stop_reason, nchaff);
622 active = 0;
623 }
624 return 1;
625 }
626
627 /*
628 * If we're in interactive mode, and only have a small amount
629 * of outbound data, then we assume that the user is typing
630 * interactively. In this case, start quantising outbound packets to
631 * fixed time intervals to hide inter-keystroke timing.
632 */
633 if (!active && ssh_packet_interactive_data_to_write(ssh) &&
634 channel_did_enqueue && ssh_packet_have_data_to_write(ssh)) {
635 debug3_f("starting: interval ~%dms",
636 options.obscure_keystroke_timing_interval);
637 just_started = had_keystroke = active = 1;
638 nchaff = 0;
639 set_next_interval(&now, &next_interval,
640 options.obscure_keystroke_timing_interval, 1);
641 }
642
643 /* Don't hold off if obfuscation inactive */
644 if (!active)
645 return 1;
646
647 if (had_keystroke) {
648 /*
649 * Arrange to send chaff packets for a random interval after
650 * the last keystroke was sent.
651 */
652 ms_to_timespec(&tmp, SSH_KEYSTROKE_CHAFF_MIN_MS +
653 arc4random_uniform(SSH_KEYSTROKE_CHAFF_RNG_MS));
654 timespecadd(&now, &tmp, &chaff_until);
655 }
656
657 ptimeout_deadline_monotime_tsp(timeout, &next_interval);
658
659 if (just_started)
660 return 1;
661
662 /* Don't arm output fd for poll until the timing interval has elapsed... */
663 if (timespeccmp(&now, &next_interval, <))
664 /* ...unless there's x11 communication happening */
665 return x11_channel_used_recently(ssh);
666
667 /* Calculate number of intervals missed since the last check */
668 n = (now.tv_sec - next_interval.tv_sec) * 1000LL * 1000 * 1000;
669 n += now.tv_nsec - next_interval.tv_nsec;
670 n /= options.obscure_keystroke_timing_interval * 1000LL * 1000;
671 n = (n < 0) ? 1 : n + 1;
672
673 /* Advance to the next interval */
674 set_next_interval(&now, &next_interval,
675 options.obscure_keystroke_timing_interval * n, 0);
676 return 1;
677 }
678
679 /*
680 * Waits until the client can do something (some data becomes available on
681 * one of the file descriptors).
682 */
683 static void
client_wait_until_can_do_something(struct ssh * ssh,struct pollfd ** pfdp,u_int * npfd_allocp,u_int * npfd_activep,int channel_did_enqueue,sigset_t * sigsetp,int * conn_in_readyp,int * conn_out_readyp)684 client_wait_until_can_do_something(struct ssh *ssh, struct pollfd **pfdp,
685 u_int *npfd_allocp, u_int *npfd_activep, int channel_did_enqueue,
686 sigset_t *sigsetp, int *conn_in_readyp, int *conn_out_readyp)
687 {
688 struct timespec timeout;
689 int ret, oready;
690 u_int p;
691
692 *conn_in_readyp = *conn_out_readyp = 0;
693
694 /* Prepare channel poll. First two pollfd entries are reserved */
695 ptimeout_init(&timeout);
696 channel_prepare_poll(ssh, pfdp, npfd_allocp, npfd_activep, 2, &timeout);
697 if (*npfd_activep < 2)
698 fatal_f("bad npfd %u", *npfd_activep); /* shouldn't happen */
699
700 /* channel_prepare_poll could have closed the last channel */
701 if (session_closed && !channel_still_open(ssh) &&
702 !ssh_packet_have_data_to_write(ssh)) {
703 /* clear events since we did not call poll() */
704 for (p = 0; p < *npfd_activep; p++)
705 (*pfdp)[p].revents = 0;
706 return;
707 }
708
709 oready = obfuscate_keystroke_timing(ssh, &timeout, channel_did_enqueue);
710
711 /* Monitor server connection on reserved pollfd entries */
712 (*pfdp)[0].fd = connection_in;
713 (*pfdp)[0].events = POLLIN;
714 (*pfdp)[1].fd = connection_out;
715 (*pfdp)[1].events = (oready && ssh_packet_have_data_to_write(ssh)) ?
716 POLLOUT : 0;
717
718 /*
719 * Wait for something to happen. This will suspend the process until
720 * some polled descriptor can be read, written, or has some other
721 * event pending, or a timeout expires.
722 */
723 set_control_persist_exit_time(ssh);
724 if (control_persist_exit_time > 0)
725 ptimeout_deadline_monotime(&timeout, control_persist_exit_time);
726 if (options.server_alive_interval > 0)
727 ptimeout_deadline_monotime(&timeout, server_alive_time);
728 if (options.rekey_interval > 0 && !ssh_packet_is_rekeying(ssh)) {
729 ptimeout_deadline_sec(&timeout,
730 ssh_packet_get_rekey_timeout(ssh));
731 }
732
733 ret = ppoll(*pfdp, *npfd_activep, ptimeout_get_tsp(&timeout), sigsetp);
734
735 if (ret == -1) {
736 /*
737 * We have to clear the events because we return.
738 * We have to return, because the mainloop checks for the flags
739 * set by the signal handlers.
740 */
741 for (p = 0; p < *npfd_activep; p++)
742 (*pfdp)[p].revents = 0;
743 if (errno == EINTR)
744 return;
745 /* Note: we might still have data in the buffers. */
746 quit_message("poll: %s", strerror(errno));
747 return;
748 }
749
750 *conn_in_readyp = (*pfdp)[0].revents != 0;
751 *conn_out_readyp = (*pfdp)[1].revents != 0;
752
753 if (options.server_alive_interval > 0 && !*conn_in_readyp &&
754 monotime() >= server_alive_time) {
755 /*
756 * ServerAlive check is needed. We can't rely on the poll
757 * timing out since traffic on the client side such as port
758 * forwards can keep waking it up.
759 */
760 server_alive_check(ssh);
761 }
762 }
763
764 static void
client_suspend_self(struct sshbuf * bin,struct sshbuf * bout,struct sshbuf * berr)765 client_suspend_self(struct sshbuf *bin, struct sshbuf *bout, struct sshbuf *berr)
766 {
767 /* Flush stdout and stderr buffers. */
768 if (sshbuf_len(bout) > 0)
769 atomicio(vwrite, fileno(stdout), sshbuf_mutable_ptr(bout),
770 sshbuf_len(bout));
771 if (sshbuf_len(berr) > 0)
772 atomicio(vwrite, fileno(stderr), sshbuf_mutable_ptr(berr),
773 sshbuf_len(berr));
774
775 leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
776
777 sshbuf_reset(bin);
778 sshbuf_reset(bout);
779 sshbuf_reset(berr);
780
781 /* Send the suspend signal to the program itself. */
782 kill(getpid(), SIGTSTP);
783
784 /* Reset window sizes in case they have changed */
785 received_window_change_signal = 1;
786
787 enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
788 }
789
790 static void
client_process_net_input(struct ssh * ssh)791 client_process_net_input(struct ssh *ssh)
792 {
793 int r;
794
795 /*
796 * Read input from the server, and add any such data to the buffer of
797 * the packet subsystem.
798 */
799 schedule_server_alive_check();
800 if ((r = ssh_packet_process_read(ssh, connection_in)) == 0)
801 return; /* success */
802 if (r == SSH_ERR_SYSTEM_ERROR) {
803 if (errno == EAGAIN || errno == EINTR || errno == EWOULDBLOCK)
804 return;
805 if (errno == EPIPE) {
806 quit_message("Connection to %s closed by remote host.",
807 host);
808 return;
809 }
810 }
811 quit_message("Read from remote host %s: %s", host, ssh_err(r));
812 }
813
814 static void
client_status_confirm(struct ssh * ssh,int type,Channel * c,void * ctx)815 client_status_confirm(struct ssh *ssh, int type, Channel *c, void *ctx)
816 {
817 struct channel_reply_ctx *cr = (struct channel_reply_ctx *)ctx;
818 char errmsg[256];
819 int r, tochan;
820
821 /*
822 * If a TTY was explicitly requested, then a failure to allocate
823 * one is fatal.
824 */
825 if (cr->action == CONFIRM_TTY &&
826 (options.request_tty == REQUEST_TTY_FORCE ||
827 options.request_tty == REQUEST_TTY_YES))
828 cr->action = CONFIRM_CLOSE;
829
830 /* XXX suppress on mux _client_ quietmode */
831 tochan = options.log_level >= SYSLOG_LEVEL_ERROR &&
832 c->ctl_chan != -1 && c->extended_usage == CHAN_EXTENDED_WRITE;
833
834 if (type == SSH2_MSG_CHANNEL_SUCCESS) {
835 debug2("%s request accepted on channel %d",
836 cr->request_type, c->self);
837 } else if (type == SSH2_MSG_CHANNEL_FAILURE) {
838 if (tochan) {
839 snprintf(errmsg, sizeof(errmsg),
840 "%s request failed\r\n", cr->request_type);
841 } else {
842 snprintf(errmsg, sizeof(errmsg),
843 "%s request failed on channel %d",
844 cr->request_type, c->self);
845 }
846 /* If error occurred on primary session channel, then exit */
847 if (cr->action == CONFIRM_CLOSE && c->self == session_ident)
848 fatal("%s", errmsg);
849 /*
850 * If error occurred on mux client, append to
851 * their stderr.
852 */
853 if (tochan) {
854 debug3_f("channel %d: mux request: %s", c->self,
855 cr->request_type);
856 if ((r = sshbuf_put(c->extended, errmsg,
857 strlen(errmsg))) != 0)
858 fatal_fr(r, "sshbuf_put");
859 } else
860 error("%s", errmsg);
861 if (cr->action == CONFIRM_TTY) {
862 /*
863 * If a TTY allocation error occurred, then arrange
864 * for the correct TTY to leave raw mode.
865 */
866 if (c->self == session_ident)
867 leave_raw_mode(0);
868 else
869 mux_tty_alloc_failed(ssh, c);
870 } else if (cr->action == CONFIRM_CLOSE) {
871 chan_read_failed(ssh, c);
872 chan_write_failed(ssh, c);
873 }
874 }
875 free(cr);
876 }
877
878 static void
client_abandon_status_confirm(struct ssh * ssh,Channel * c,void * ctx)879 client_abandon_status_confirm(struct ssh *ssh, Channel *c, void *ctx)
880 {
881 free(ctx);
882 }
883
884 void
client_expect_confirm(struct ssh * ssh,int id,const char * request,enum confirm_action action)885 client_expect_confirm(struct ssh *ssh, int id, const char *request,
886 enum confirm_action action)
887 {
888 struct channel_reply_ctx *cr = xcalloc(1, sizeof(*cr));
889
890 cr->request_type = request;
891 cr->action = action;
892
893 channel_register_status_confirm(ssh, id, client_status_confirm,
894 client_abandon_status_confirm, cr);
895 }
896
897 void
client_register_global_confirm(global_confirm_cb * cb,void * ctx)898 client_register_global_confirm(global_confirm_cb *cb, void *ctx)
899 {
900 struct global_confirm *gc, *last_gc;
901
902 /* Coalesce identical callbacks */
903 last_gc = TAILQ_LAST(&global_confirms, global_confirms);
904 if (last_gc && last_gc->cb == cb && last_gc->ctx == ctx) {
905 if (++last_gc->ref_count >= INT_MAX)
906 fatal_f("last_gc->ref_count = %d",
907 last_gc->ref_count);
908 return;
909 }
910
911 gc = xcalloc(1, sizeof(*gc));
912 gc->cb = cb;
913 gc->ctx = ctx;
914 gc->ref_count = 1;
915 TAILQ_INSERT_TAIL(&global_confirms, gc, entry);
916 }
917
918 /*
919 * Returns non-zero if the client is able to handle a hostkeys-00@openssh.com
920 * hostkey update request.
921 */
922 static int
can_update_hostkeys(void)923 can_update_hostkeys(void)
924 {
925 if (hostkeys_update_complete)
926 return 0;
927 if (options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK &&
928 options.batch_mode)
929 return 0; /* won't ask in batchmode, so don't even try */
930 if (!options.update_hostkeys || options.num_user_hostfiles <= 0)
931 return 0;
932 return 1;
933 }
934
935 static void
client_repledge(void)936 client_repledge(void)
937 {
938 debug3_f("enter");
939
940 /* Might be able to tighten pledge now that session is established */
941 if (options.control_master || options.control_path != NULL ||
942 options.forward_x11 || options.fork_after_authentication ||
943 can_update_hostkeys() ||
944 (session_ident != -1 && !session_setup_complete)) {
945 /* Can't tighten */
946 return;
947 }
948 /*
949 * LocalCommand and UpdateHostkeys have finished, so can get rid of
950 * filesystem.
951 *
952 * XXX protocol allows a server can to change hostkeys during the
953 * connection at rekey time that could trigger a hostkeys update
954 * but AFAIK no implementations support this. Could improve by
955 * forcing known_hosts to be read-only or via unveil(2).
956 */
957 if (options.num_local_forwards != 0 ||
958 options.num_remote_forwards != 0 ||
959 options.num_permitted_remote_opens != 0 ||
960 options.enable_escape_commandline != 0) {
961 /* rfwd needs inet */
962 debug("pledge: network");
963 if (pledge("stdio unix inet dns proc tty", NULL) == -1)
964 fatal_f("pledge(): %s", strerror(errno));
965 } else if (options.forward_agent != 0) {
966 /* agent forwarding needs to open $SSH_AUTH_SOCK at will */
967 debug("pledge: agent");
968 if (pledge("stdio unix proc tty", NULL) == -1)
969 fatal_f("pledge(): %s", strerror(errno));
970 } else {
971 debug("pledge: fork");
972 if (pledge("stdio proc tty", NULL) == -1)
973 fatal_f("pledge(): %s", strerror(errno));
974 }
975 /* XXX further things to do:
976 *
977 * - might be able to get rid of proc if we kill ~^Z
978 * - ssh -N (no session)
979 * - stdio forwarding
980 * - sessions without tty
981 */
982 }
983
984 static void
process_cmdline(struct ssh * ssh)985 process_cmdline(struct ssh *ssh)
986 {
987 void (*handler)(int);
988 char *s, *cmd;
989 int ok, delete = 0, local = 0, remote = 0, dynamic = 0;
990 struct Forward fwd;
991
992 memset(&fwd, 0, sizeof(fwd));
993
994 leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
995 handler = ssh_signal(SIGINT, SIG_IGN);
996 cmd = s = read_passphrase("\r\nssh> ", RP_ECHO);
997 if (s == NULL)
998 goto out;
999 while (isspace((u_char)*s))
1000 s++;
1001 if (*s == '-')
1002 s++; /* Skip cmdline '-', if any */
1003 if (*s == '\0')
1004 goto out;
1005
1006 if (*s == 'h' || *s == 'H' || *s == '?') {
1007 logit("Commands:");
1008 logit(" -L[bind_address:]port:host:hostport "
1009 "Request local forward");
1010 logit(" -R[bind_address:]port:host:hostport "
1011 "Request remote forward");
1012 logit(" -D[bind_address:]port "
1013 "Request dynamic forward");
1014 logit(" -KL[bind_address:]port "
1015 "Cancel local forward");
1016 logit(" -KR[bind_address:]port "
1017 "Cancel remote forward");
1018 logit(" -KD[bind_address:]port "
1019 "Cancel dynamic forward");
1020 if (!options.permit_local_command)
1021 goto out;
1022 logit(" !args "
1023 "Execute local command");
1024 goto out;
1025 }
1026
1027 if (*s == '!' && options.permit_local_command) {
1028 s++;
1029 ssh_local_cmd(s);
1030 goto out;
1031 }
1032
1033 if (*s == 'K') {
1034 delete = 1;
1035 s++;
1036 }
1037 if (*s == 'L')
1038 local = 1;
1039 else if (*s == 'R')
1040 remote = 1;
1041 else if (*s == 'D')
1042 dynamic = 1;
1043 else {
1044 logit("Invalid command.");
1045 goto out;
1046 }
1047
1048 while (isspace((u_char)*++s))
1049 ;
1050
1051 /* XXX update list of forwards in options */
1052 if (delete) {
1053 /* We pass 1 for dynamicfwd to restrict to 1 or 2 fields. */
1054 if (!parse_forward(&fwd, s, 1, 0)) {
1055 logit("Bad forwarding close specification.");
1056 goto out;
1057 }
1058 if (remote)
1059 ok = channel_request_rforward_cancel(ssh, &fwd) == 0;
1060 else if (dynamic)
1061 ok = channel_cancel_lport_listener(ssh, &fwd,
1062 0, &options.fwd_opts) > 0;
1063 else
1064 ok = channel_cancel_lport_listener(ssh, &fwd,
1065 CHANNEL_CANCEL_PORT_STATIC,
1066 &options.fwd_opts) > 0;
1067 if (!ok) {
1068 logit("Unknown port forwarding.");
1069 goto out;
1070 }
1071 logit("Canceled forwarding.");
1072 } else {
1073 /* -R specs can be both dynamic or not, so check both. */
1074 if (remote) {
1075 if (!parse_forward(&fwd, s, 0, remote) &&
1076 !parse_forward(&fwd, s, 1, remote)) {
1077 logit("Bad remote forwarding specification.");
1078 goto out;
1079 }
1080 } else if (!parse_forward(&fwd, s, dynamic, remote)) {
1081 logit("Bad local forwarding specification.");
1082 goto out;
1083 }
1084 if (local || dynamic) {
1085 if (!channel_setup_local_fwd_listener(ssh, &fwd,
1086 &options.fwd_opts)) {
1087 logit("Port forwarding failed.");
1088 goto out;
1089 }
1090 } else {
1091 if (channel_request_remote_forwarding(ssh, &fwd) < 0) {
1092 logit("Port forwarding failed.");
1093 goto out;
1094 }
1095 }
1096 logit("Forwarding port.");
1097 }
1098
1099 out:
1100 ssh_signal(SIGINT, handler);
1101 enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1102 free(cmd);
1103 free(fwd.listen_host);
1104 free(fwd.listen_path);
1105 free(fwd.connect_host);
1106 free(fwd.connect_path);
1107 }
1108
1109 /* reasons to suppress output of an escape command in help output */
1110 #define SUPPRESS_NEVER 0 /* never suppress, always show */
1111 #define SUPPRESS_MUXCLIENT 1 /* don't show in mux client sessions */
1112 #define SUPPRESS_MUXMASTER 2 /* don't show in mux master sessions */
1113 #define SUPPRESS_SYSLOG 4 /* don't show when logging to syslog */
1114 #define SUPPRESS_NOCMDLINE 8 /* don't show when cmdline disabled*/
1115 struct escape_help_text {
1116 const char *cmd;
1117 const char *text;
1118 unsigned int flags;
1119 };
1120 static struct escape_help_text esc_txt[] = {
1121 {".", "terminate session", SUPPRESS_MUXMASTER},
1122 {".", "terminate connection (and any multiplexed sessions)",
1123 SUPPRESS_MUXCLIENT},
1124 {"B", "send a BREAK to the remote system", SUPPRESS_NEVER},
1125 {"C", "open a command line", SUPPRESS_MUXCLIENT|SUPPRESS_NOCMDLINE},
1126 {"R", "request rekey", SUPPRESS_NEVER},
1127 {"V/v", "decrease/increase verbosity (LogLevel)", SUPPRESS_MUXCLIENT},
1128 {"^Z", "suspend ssh", SUPPRESS_MUXCLIENT},
1129 {"#", "list forwarded connections", SUPPRESS_NEVER},
1130 {"&", "background ssh (when waiting for connections to terminate)",
1131 SUPPRESS_MUXCLIENT},
1132 {"?", "this message", SUPPRESS_NEVER},
1133 };
1134
1135 static void
print_escape_help(struct sshbuf * b,int escape_char,int mux_client,int using_stderr)1136 print_escape_help(struct sshbuf *b, int escape_char, int mux_client,
1137 int using_stderr)
1138 {
1139 unsigned int i, suppress_flags;
1140 int r;
1141
1142 if ((r = sshbuf_putf(b,
1143 "%c?\r\nSupported escape sequences:\r\n", escape_char)) != 0)
1144 fatal_fr(r, "sshbuf_putf");
1145
1146 suppress_flags =
1147 (mux_client ? SUPPRESS_MUXCLIENT : 0) |
1148 (mux_client ? 0 : SUPPRESS_MUXMASTER) |
1149 (using_stderr ? 0 : SUPPRESS_SYSLOG) |
1150 (options.enable_escape_commandline == 0 ? SUPPRESS_NOCMDLINE : 0);
1151
1152 for (i = 0; i < sizeof(esc_txt)/sizeof(esc_txt[0]); i++) {
1153 if (esc_txt[i].flags & suppress_flags)
1154 continue;
1155 if ((r = sshbuf_putf(b, " %c%-3s - %s\r\n",
1156 escape_char, esc_txt[i].cmd, esc_txt[i].text)) != 0)
1157 fatal_fr(r, "sshbuf_putf");
1158 }
1159
1160 if ((r = sshbuf_putf(b,
1161 " %c%c - send the escape character by typing it twice\r\n"
1162 "(Note that escapes are only recognized immediately after "
1163 "newline.)\r\n", escape_char, escape_char)) != 0)
1164 fatal_fr(r, "sshbuf_putf");
1165 }
1166
1167 /*
1168 * Process the characters one by one.
1169 */
1170 static int
process_escapes(struct ssh * ssh,Channel * c,struct sshbuf * bin,struct sshbuf * bout,struct sshbuf * berr,char * buf,int len)1171 process_escapes(struct ssh *ssh, Channel *c,
1172 struct sshbuf *bin, struct sshbuf *bout, struct sshbuf *berr,
1173 char *buf, int len)
1174 {
1175 pid_t pid;
1176 int r, bytes = 0;
1177 u_int i;
1178 u_char ch;
1179 char *s;
1180 struct escape_filter_ctx *efc;
1181
1182 if (c == NULL || c->filter_ctx == NULL || len <= 0)
1183 return 0;
1184
1185 efc = (struct escape_filter_ctx *)c->filter_ctx;
1186
1187 for (i = 0; i < (u_int)len; i++) {
1188 /* Get one character at a time. */
1189 ch = buf[i];
1190
1191 if (efc->escape_pending) {
1192 /* We have previously seen an escape character. */
1193 /* Clear the flag now. */
1194 efc->escape_pending = 0;
1195
1196 /* Process the escaped character. */
1197 switch (ch) {
1198 case '.':
1199 /* Terminate the connection. */
1200 if ((r = sshbuf_putf(berr, "%c.\r\n",
1201 efc->escape_char)) != 0)
1202 fatal_fr(r, "sshbuf_putf");
1203 if (c && c->ctl_chan != -1) {
1204 channel_force_close(ssh, c, 1);
1205 return 0;
1206 } else
1207 quit_pending = 1;
1208 return -1;
1209
1210 case 'Z' - 64:
1211 /* XXX support this for mux clients */
1212 if (c && c->ctl_chan != -1) {
1213 char b[16];
1214 noescape:
1215 if (ch == 'Z' - 64)
1216 snprintf(b, sizeof b, "^Z");
1217 else
1218 snprintf(b, sizeof b, "%c", ch);
1219 if ((r = sshbuf_putf(berr,
1220 "%c%s escape not available to "
1221 "multiplexed sessions\r\n",
1222 efc->escape_char, b)) != 0)
1223 fatal_fr(r, "sshbuf_putf");
1224 continue;
1225 }
1226 /* Suspend the program. Inform the user */
1227 if ((r = sshbuf_putf(berr,
1228 "%c^Z [suspend ssh]\r\n",
1229 efc->escape_char)) != 0)
1230 fatal_fr(r, "sshbuf_putf");
1231
1232 /* Restore terminal modes and suspend. */
1233 client_suspend_self(bin, bout, berr);
1234
1235 /* We have been continued. */
1236 continue;
1237
1238 case 'B':
1239 if ((r = sshbuf_putf(berr,
1240 "%cB\r\n", efc->escape_char)) != 0)
1241 fatal_fr(r, "sshbuf_putf");
1242 channel_request_start(ssh, c->self, "break", 0);
1243 if ((r = sshpkt_put_u32(ssh, 1000)) != 0 ||
1244 (r = sshpkt_send(ssh)) != 0)
1245 fatal_fr(r, "send packet");
1246 continue;
1247
1248 case 'R':
1249 if (ssh->compat & SSH_BUG_NOREKEY)
1250 logit("Server does not "
1251 "support re-keying");
1252 else
1253 need_rekeying = 1;
1254 continue;
1255
1256 case 'V':
1257 /* FALLTHROUGH */
1258 case 'v':
1259 if (c && c->ctl_chan != -1)
1260 goto noescape;
1261 if (!log_is_on_stderr()) {
1262 if ((r = sshbuf_putf(berr,
1263 "%c%c [Logging to syslog]\r\n",
1264 efc->escape_char, ch)) != 0)
1265 fatal_fr(r, "sshbuf_putf");
1266 continue;
1267 }
1268 if (ch == 'V' && options.log_level >
1269 SYSLOG_LEVEL_QUIET)
1270 log_change_level(--options.log_level);
1271 if (ch == 'v' && options.log_level <
1272 SYSLOG_LEVEL_DEBUG3)
1273 log_change_level(++options.log_level);
1274 if ((r = sshbuf_putf(berr,
1275 "%c%c [LogLevel %s]\r\n",
1276 efc->escape_char, ch,
1277 log_level_name(options.log_level))) != 0)
1278 fatal_fr(r, "sshbuf_putf");
1279 continue;
1280
1281 case '&':
1282 if (c->ctl_chan != -1)
1283 goto noescape;
1284 /*
1285 * Detach the program (continue to serve
1286 * connections, but put in background and no
1287 * more new connections).
1288 */
1289 /* Restore tty modes. */
1290 leave_raw_mode(
1291 options.request_tty == REQUEST_TTY_FORCE);
1292
1293 /* Stop listening for new connections. */
1294 channel_stop_listening(ssh);
1295
1296 if ((r = sshbuf_putf(berr, "%c& "
1297 "[backgrounded]\n", efc->escape_char)) != 0)
1298 fatal_fr(r, "sshbuf_putf");
1299
1300 /* Fork into background. */
1301 pid = fork();
1302 if (pid == -1) {
1303 error("fork: %.100s", strerror(errno));
1304 continue;
1305 }
1306 if (pid != 0) { /* This is the parent. */
1307 /* The parent just exits. */
1308 exit(0);
1309 }
1310 /* The child continues serving connections. */
1311 /* fake EOF on stdin */
1312 if ((r = sshbuf_put_u8(bin, 4)) != 0)
1313 fatal_fr(r, "sshbuf_put_u8");
1314 return -1;
1315 case '?':
1316 print_escape_help(berr, efc->escape_char,
1317 (c && c->ctl_chan != -1),
1318 log_is_on_stderr());
1319 continue;
1320
1321 case '#':
1322 if ((r = sshbuf_putf(berr, "%c#\r\n",
1323 efc->escape_char)) != 0)
1324 fatal_fr(r, "sshbuf_putf");
1325 s = channel_open_message(ssh);
1326 if ((r = sshbuf_put(berr, s, strlen(s))) != 0)
1327 fatal_fr(r, "sshbuf_put");
1328 free(s);
1329 continue;
1330
1331 case 'C':
1332 if (c && c->ctl_chan != -1)
1333 goto noescape;
1334 if (options.enable_escape_commandline == 0) {
1335 if ((r = sshbuf_putf(berr,
1336 "commandline disabled\r\n")) != 0)
1337 fatal_fr(r, "sshbuf_putf");
1338 continue;
1339 }
1340 process_cmdline(ssh);
1341 continue;
1342
1343 default:
1344 if (ch != efc->escape_char) {
1345 if ((r = sshbuf_put_u8(bin,
1346 efc->escape_char)) != 0)
1347 fatal_fr(r, "sshbuf_put_u8");
1348 bytes++;
1349 }
1350 /* Escaped characters fall through here */
1351 break;
1352 }
1353 } else {
1354 /*
1355 * The previous character was not an escape char.
1356 * Check if this is an escape.
1357 */
1358 if (last_was_cr && ch == efc->escape_char) {
1359 /*
1360 * It is. Set the flag and continue to
1361 * next character.
1362 */
1363 efc->escape_pending = 1;
1364 continue;
1365 }
1366 }
1367
1368 /*
1369 * Normal character. Record whether it was a newline,
1370 * and append it to the buffer.
1371 */
1372 last_was_cr = (ch == '\r' || ch == '\n');
1373 if ((r = sshbuf_put_u8(bin, ch)) != 0)
1374 fatal_fr(r, "sshbuf_put_u8");
1375 bytes++;
1376 }
1377 return bytes;
1378 }
1379
1380 /*
1381 * Get packets from the connection input buffer, and process them as long as
1382 * there are packets available.
1383 *
1384 * Any unknown packets received during the actual
1385 * session cause the session to terminate. This is
1386 * intended to make debugging easier since no
1387 * confirmations are sent. Any compatible protocol
1388 * extensions must be negotiated during the
1389 * preparatory phase.
1390 */
1391
1392 static void
client_process_buffered_input_packets(struct ssh * ssh)1393 client_process_buffered_input_packets(struct ssh *ssh)
1394 {
1395 ssh_dispatch_run_fatal(ssh, DISPATCH_NONBLOCK, &quit_pending);
1396 }
1397
1398 /* scan buf[] for '~' before sending data to the peer */
1399
1400 /* Helper: allocate a new escape_filter_ctx and fill in its escape char */
1401 void *
client_new_escape_filter_ctx(int escape_char)1402 client_new_escape_filter_ctx(int escape_char)
1403 {
1404 struct escape_filter_ctx *ret;
1405
1406 ret = xcalloc(1, sizeof(*ret));
1407 ret->escape_pending = 0;
1408 ret->escape_char = escape_char;
1409 return (void *)ret;
1410 }
1411
1412 /* Free the escape filter context on channel free */
1413 void
client_filter_cleanup(struct ssh * ssh,int cid,void * ctx)1414 client_filter_cleanup(struct ssh *ssh, int cid, void *ctx)
1415 {
1416 free(ctx);
1417 }
1418
1419 int
client_simple_escape_filter(struct ssh * ssh,Channel * c,char * buf,int len)1420 client_simple_escape_filter(struct ssh *ssh, Channel *c, char *buf, int len)
1421 {
1422 if (c->extended_usage != CHAN_EXTENDED_WRITE)
1423 return 0;
1424
1425 return process_escapes(ssh, c, c->input, c->output, c->extended,
1426 buf, len);
1427 }
1428
1429 static void
client_channel_closed(struct ssh * ssh,int id,int force,void * arg)1430 client_channel_closed(struct ssh *ssh, int id, int force, void *arg)
1431 {
1432 channel_cancel_cleanup(ssh, id);
1433 session_closed = 1;
1434 leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1435 }
1436
1437 /*
1438 * Implements the interactive session with the server. This is called after
1439 * the user has been authenticated, and a command has been started on the
1440 * remote host. If escape_char != SSH_ESCAPECHAR_NONE, it is the character
1441 * used as an escape character for terminating or suspending the session.
1442 */
1443 int
client_loop(struct ssh * ssh,int have_pty,int escape_char_arg,int ssh2_chan_id)1444 client_loop(struct ssh *ssh, int have_pty, int escape_char_arg,
1445 int ssh2_chan_id)
1446 {
1447 struct pollfd *pfd = NULL;
1448 u_int npfd_alloc = 0, npfd_active = 0;
1449 double start_time, total_time;
1450 int channel_did_enqueue = 0, r;
1451 u_int64_t ibytes, obytes;
1452 int conn_in_ready, conn_out_ready;
1453 sigset_t bsigset, osigset;
1454
1455 debug("Entering interactive session.");
1456 session_ident = ssh2_chan_id;
1457
1458 if (options.control_master &&
1459 !option_clear_or_none(options.control_path)) {
1460 debug("pledge: id");
1461 if (pledge("stdio rpath wpath cpath unix inet dns recvfd sendfd proc exec id tty",
1462 NULL) == -1)
1463 fatal_f("pledge(): %s", strerror(errno));
1464
1465 } else if (options.forward_x11 || options.permit_local_command) {
1466 debug("pledge: exec");
1467 if (pledge("stdio rpath wpath cpath unix inet dns proc exec tty",
1468 NULL) == -1)
1469 fatal_f("pledge(): %s", strerror(errno));
1470
1471 } else if (options.update_hostkeys) {
1472 debug("pledge: filesystem");
1473 if (pledge("stdio rpath wpath cpath unix inet dns proc tty",
1474 NULL) == -1)
1475 fatal_f("pledge(): %s", strerror(errno));
1476
1477 } else if (!option_clear_or_none(options.proxy_command) ||
1478 options.fork_after_authentication) {
1479 debug("pledge: proc");
1480 if (pledge("stdio cpath unix inet dns proc tty", NULL) == -1)
1481 fatal_f("pledge(): %s", strerror(errno));
1482
1483 } else {
1484 debug("pledge: network");
1485 if (pledge("stdio unix inet dns proc tty", NULL) == -1)
1486 fatal_f("pledge(): %s", strerror(errno));
1487 }
1488
1489 /* might be able to tighten now */
1490 client_repledge();
1491
1492 start_time = monotime_double();
1493
1494 /* Initialize variables. */
1495 last_was_cr = 1;
1496 exit_status = -1;
1497 connection_in = ssh_packet_get_connection_in(ssh);
1498 connection_out = ssh_packet_get_connection_out(ssh);
1499
1500 quit_pending = 0;
1501
1502 client_init_dispatch(ssh);
1503
1504 /*
1505 * Set signal handlers, (e.g. to restore non-blocking mode)
1506 * but don't overwrite SIG_IGN, matches behaviour from rsh(1)
1507 */
1508 if (ssh_signal(SIGHUP, SIG_IGN) != SIG_IGN)
1509 ssh_signal(SIGHUP, signal_handler);
1510 if (ssh_signal(SIGINT, SIG_IGN) != SIG_IGN)
1511 ssh_signal(SIGINT, signal_handler);
1512 if (ssh_signal(SIGQUIT, SIG_IGN) != SIG_IGN)
1513 ssh_signal(SIGQUIT, signal_handler);
1514 if (ssh_signal(SIGTERM, SIG_IGN) != SIG_IGN)
1515 ssh_signal(SIGTERM, signal_handler);
1516 ssh_signal(SIGWINCH, window_change_handler);
1517
1518 if (have_pty)
1519 enter_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1520
1521 if (session_ident != -1) {
1522 if (escape_char_arg != SSH_ESCAPECHAR_NONE) {
1523 channel_register_filter(ssh, session_ident,
1524 client_simple_escape_filter, NULL,
1525 client_filter_cleanup,
1526 client_new_escape_filter_ctx(
1527 escape_char_arg));
1528 }
1529 channel_register_cleanup(ssh, session_ident,
1530 client_channel_closed, 0);
1531 }
1532
1533 schedule_server_alive_check();
1534
1535 if (sigemptyset(&bsigset) == -1 ||
1536 sigaddset(&bsigset, SIGHUP) == -1 ||
1537 sigaddset(&bsigset, SIGINT) == -1 ||
1538 sigaddset(&bsigset, SIGQUIT) == -1 ||
1539 sigaddset(&bsigset, SIGTERM) == -1)
1540 error_f("bsigset setup: %s", strerror(errno));
1541
1542 /* Main loop of the client for the interactive session mode. */
1543 while (!quit_pending) {
1544 channel_did_enqueue = 0;
1545
1546 /* Process buffered packets sent by the server. */
1547 client_process_buffered_input_packets(ssh);
1548
1549 if (session_closed && !channel_still_open(ssh))
1550 break;
1551
1552 if (ssh_packet_is_rekeying(ssh)) {
1553 debug("rekeying in progress");
1554 } else if (need_rekeying) {
1555 /* manual rekey request */
1556 debug("need rekeying");
1557 if ((r = kex_start_rekex(ssh)) != 0)
1558 fatal_fr(r, "kex_start_rekex");
1559 need_rekeying = 0;
1560 } else {
1561 /*
1562 * Make packets from buffered channel data, and
1563 * enqueue them for sending to the server.
1564 */
1565 if (ssh_packet_not_very_much_data_to_write(ssh))
1566 channel_did_enqueue = channel_output_poll(ssh);
1567
1568 /*
1569 * Check if the window size has changed, and buffer a
1570 * message about it to the server if so.
1571 */
1572 client_check_window_change(ssh);
1573 }
1574 /*
1575 * Wait until we have something to do (something becomes
1576 * available on one of the descriptors).
1577 */
1578 if (sigprocmask(SIG_BLOCK, &bsigset, &osigset) == -1)
1579 error_f("bsigset sigprocmask: %s", strerror(errno));
1580 if (quit_pending)
1581 break;
1582 client_wait_until_can_do_something(ssh, &pfd, &npfd_alloc,
1583 &npfd_active, channel_did_enqueue, &osigset,
1584 &conn_in_ready, &conn_out_ready);
1585 if (sigprocmask(SIG_SETMASK, &osigset, NULL) == -1)
1586 error_f("osigset sigprocmask: %s", strerror(errno));
1587
1588 if (quit_pending)
1589 break;
1590
1591 /* Do channel operations. */
1592 channel_after_poll(ssh, pfd, npfd_active);
1593
1594 /* Buffer input from the connection. */
1595 if (conn_in_ready)
1596 client_process_net_input(ssh);
1597
1598 if (quit_pending)
1599 break;
1600
1601 /* A timeout may have triggered rekeying */
1602 if ((r = ssh_packet_check_rekey(ssh)) != 0)
1603 fatal_fr(r, "cannot start rekeying");
1604
1605 /*
1606 * Send as much buffered packet data as possible to the
1607 * sender.
1608 */
1609 if (conn_out_ready) {
1610 if ((r = ssh_packet_write_poll(ssh)) != 0) {
1611 sshpkt_fatal(ssh, r,
1612 "%s: ssh_packet_write_poll", __func__);
1613 }
1614 }
1615
1616 /*
1617 * If we are a backgrounded control master, and the
1618 * timeout has expired without any active client
1619 * connections, then quit.
1620 */
1621 if (control_persist_exit_time > 0) {
1622 if (monotime() >= control_persist_exit_time) {
1623 debug("ControlPersist timeout expired");
1624 break;
1625 }
1626 }
1627 }
1628 free(pfd);
1629
1630 /* Terminate the session. */
1631
1632 /*
1633 * In interactive mode (with pseudo tty) display a message indicating
1634 * that the connection has been closed.
1635 */
1636 if (have_pty && options.log_level >= SYSLOG_LEVEL_INFO)
1637 quit_message("Connection to %s closed.", host);
1638
1639
1640 /* Stop watching for window change. */
1641 ssh_signal(SIGWINCH, SIG_DFL);
1642
1643 if ((r = sshpkt_start(ssh, SSH2_MSG_DISCONNECT)) != 0 ||
1644 (r = sshpkt_put_u32(ssh, SSH2_DISCONNECT_BY_APPLICATION)) != 0 ||
1645 (r = sshpkt_put_cstring(ssh, "disconnected by user")) != 0 ||
1646 (r = sshpkt_put_cstring(ssh, "")) != 0 || /* language tag */
1647 (r = sshpkt_send(ssh)) != 0 ||
1648 (r = ssh_packet_write_wait(ssh)) != 0)
1649 fatal_fr(r, "send disconnect");
1650
1651 channel_free_all(ssh);
1652
1653 if (have_pty)
1654 leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
1655
1656 /*
1657 * If there was no shell or command requested, there will be no remote
1658 * exit status to be returned. In that case, clear error code if the
1659 * connection was deliberately terminated at this end.
1660 */
1661 if (options.session_type == SESSION_TYPE_NONE &&
1662 received_signal == SIGTERM) {
1663 received_signal = 0;
1664 exit_status = 0;
1665 }
1666
1667 if (received_signal) {
1668 verbose("Killed by signal %d.", (int) received_signal);
1669 cleanup_exit(255);
1670 }
1671
1672 /* Report bytes transferred, and transfer rates. */
1673 total_time = monotime_double() - start_time;
1674 ssh_packet_get_bytes(ssh, &ibytes, &obytes);
1675 verbose("Transferred: sent %llu, received %llu bytes, in %.1f seconds",
1676 (unsigned long long)obytes, (unsigned long long)ibytes, total_time);
1677 if (total_time > 0)
1678 verbose("Bytes per second: sent %.1f, received %.1f",
1679 obytes / total_time, ibytes / total_time);
1680 /* Return the exit status of the program. */
1681 debug("Exit status %d", exit_status);
1682 return exit_status;
1683 }
1684
1685 /*********/
1686
1687 static Channel *
client_request_forwarded_tcpip(struct ssh * ssh,const char * request_type,int rchan,u_int rwindow,u_int rmaxpack)1688 client_request_forwarded_tcpip(struct ssh *ssh, const char *request_type,
1689 int rchan, u_int rwindow, u_int rmaxpack)
1690 {
1691 Channel *c = NULL;
1692 struct sshbuf *b = NULL;
1693 char *listen_address, *originator_address;
1694 u_int listen_port, originator_port;
1695 int r;
1696
1697 /* Get rest of the packet */
1698 if ((r = sshpkt_get_cstring(ssh, &listen_address, NULL)) != 0 ||
1699 (r = sshpkt_get_u32(ssh, &listen_port)) != 0 ||
1700 (r = sshpkt_get_cstring(ssh, &originator_address, NULL)) != 0 ||
1701 (r = sshpkt_get_u32(ssh, &originator_port)) != 0 ||
1702 (r = sshpkt_get_end(ssh)) != 0)
1703 fatal_fr(r, "parse packet");
1704
1705 debug_f("listen %s port %d, originator %s port %d",
1706 listen_address, listen_port, originator_address, originator_port);
1707
1708 if (listen_port > 0xffff)
1709 error_f("invalid listen port");
1710 else if (originator_port > 0xffff)
1711 error_f("invalid originator port");
1712 else {
1713 c = channel_connect_by_listen_address(ssh,
1714 listen_address, listen_port, "forwarded-tcpip",
1715 originator_address);
1716 }
1717
1718 if (c != NULL && c->type == SSH_CHANNEL_MUX_CLIENT) {
1719 if ((b = sshbuf_new()) == NULL) {
1720 error_f("alloc reply");
1721 goto out;
1722 }
1723 /* reconstruct and send to muxclient */
1724 if ((r = sshbuf_put_u8(b, 0)) != 0 || /* padlen */
1725 (r = sshbuf_put_u8(b, SSH2_MSG_CHANNEL_OPEN)) != 0 ||
1726 (r = sshbuf_put_cstring(b, request_type)) != 0 ||
1727 (r = sshbuf_put_u32(b, rchan)) != 0 ||
1728 (r = sshbuf_put_u32(b, rwindow)) != 0 ||
1729 (r = sshbuf_put_u32(b, rmaxpack)) != 0 ||
1730 (r = sshbuf_put_cstring(b, listen_address)) != 0 ||
1731 (r = sshbuf_put_u32(b, listen_port)) != 0 ||
1732 (r = sshbuf_put_cstring(b, originator_address)) != 0 ||
1733 (r = sshbuf_put_u32(b, originator_port)) != 0 ||
1734 (r = sshbuf_put_stringb(c->output, b)) != 0) {
1735 error_fr(r, "compose for muxclient");
1736 goto out;
1737 }
1738 }
1739
1740 out:
1741 sshbuf_free(b);
1742 free(originator_address);
1743 free(listen_address);
1744 return c;
1745 }
1746
1747 static Channel *
client_request_forwarded_streamlocal(struct ssh * ssh,const char * request_type,int rchan)1748 client_request_forwarded_streamlocal(struct ssh *ssh,
1749 const char *request_type, int rchan)
1750 {
1751 Channel *c = NULL;
1752 char *listen_path;
1753 int r;
1754
1755 /* Get the remote path. */
1756 if ((r = sshpkt_get_cstring(ssh, &listen_path, NULL)) != 0 ||
1757 (r = sshpkt_get_string(ssh, NULL, NULL)) != 0 || /* reserved */
1758 (r = sshpkt_get_end(ssh)) != 0)
1759 fatal_fr(r, "parse packet");
1760
1761 debug_f("request: %s", listen_path);
1762
1763 c = channel_connect_by_listen_path(ssh, listen_path,
1764 "forwarded-streamlocal@openssh.com", "forwarded-streamlocal");
1765 free(listen_path);
1766 return c;
1767 }
1768
1769 static Channel *
client_request_x11(struct ssh * ssh,const char * request_type,int rchan)1770 client_request_x11(struct ssh *ssh, const char *request_type, int rchan)
1771 {
1772 Channel *c = NULL;
1773 char *originator;
1774 u_int originator_port;
1775 int r, sock;
1776
1777 if (!options.forward_x11) {
1778 error("Warning: ssh server tried X11 forwarding.");
1779 error("Warning: this is probably a break-in attempt by a "
1780 "malicious server.");
1781 return NULL;
1782 }
1783 if (x11_refuse_time != 0 && monotime() >= x11_refuse_time) {
1784 verbose("Rejected X11 connection after ForwardX11Timeout "
1785 "expired");
1786 return NULL;
1787 }
1788 if ((r = sshpkt_get_cstring(ssh, &originator, NULL)) != 0 ||
1789 (r = sshpkt_get_u32(ssh, &originator_port)) != 0 ||
1790 (r = sshpkt_get_end(ssh)) != 0)
1791 fatal_fr(r, "parse packet");
1792 /* XXX check permission */
1793 /* XXX range check originator port? */
1794 debug("client_request_x11: request from %s %u", originator,
1795 originator_port);
1796 free(originator);
1797 sock = x11_connect_display(ssh);
1798 if (sock < 0)
1799 return NULL;
1800 c = channel_new(ssh, "x11-connection",
1801 SSH_CHANNEL_X11_OPEN, sock, sock, -1,
1802 CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1);
1803 c->force_drain = 1;
1804 return c;
1805 }
1806
1807 static Channel *
client_request_agent(struct ssh * ssh,const char * request_type,int rchan)1808 client_request_agent(struct ssh *ssh, const char *request_type, int rchan)
1809 {
1810 Channel *c = NULL;
1811 int r, sock;
1812
1813 if (!options.forward_agent) {
1814 error("Warning: ssh server tried agent forwarding.");
1815 error("Warning: this is probably a break-in attempt by a "
1816 "malicious server.");
1817 return NULL;
1818 }
1819 if (forward_agent_sock_path == NULL) {
1820 r = ssh_get_authentication_socket(&sock);
1821 } else {
1822 r = ssh_get_authentication_socket_path(forward_agent_sock_path, &sock);
1823 }
1824 if (r != 0) {
1825 if (r != SSH_ERR_AGENT_NOT_PRESENT)
1826 debug_fr(r, "ssh_get_authentication_socket");
1827 return NULL;
1828 }
1829 if ((r = ssh_agent_bind_hostkey(sock, ssh->kex->initial_hostkey,
1830 ssh->kex->session_id, ssh->kex->initial_sig, 1)) == 0)
1831 debug_f("bound agent to hostkey");
1832 else
1833 debug2_fr(r, "ssh_agent_bind_hostkey");
1834
1835 c = channel_new(ssh, "agent-connection",
1836 SSH_CHANNEL_OPEN, sock, sock, -1,
1837 CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0,
1838 "authentication agent connection", 1);
1839 c->force_drain = 1;
1840 return c;
1841 }
1842
1843 char *
client_request_tun_fwd(struct ssh * ssh,int tun_mode,int local_tun,int remote_tun,channel_open_fn * cb,void * cbctx)1844 client_request_tun_fwd(struct ssh *ssh, int tun_mode,
1845 int local_tun, int remote_tun, channel_open_fn *cb, void *cbctx)
1846 {
1847 Channel *c;
1848 int r, fd;
1849 char *ifname = NULL;
1850
1851 if (tun_mode == SSH_TUNMODE_NO)
1852 return 0;
1853
1854 debug("Requesting tun unit %d in mode %d", local_tun, tun_mode);
1855
1856 /* Open local tunnel device */
1857 if ((fd = tun_open(local_tun, tun_mode, &ifname)) == -1) {
1858 error("Tunnel device open failed.");
1859 return NULL;
1860 }
1861 debug("Tunnel forwarding using interface %s", ifname);
1862
1863 c = channel_new(ssh, "tun-connection", SSH_CHANNEL_OPENING, fd, fd, -1,
1864 CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 0, "tun", 1);
1865 c->datagram = 1;
1866
1867 #if defined(SSH_TUN_FILTER)
1868 if (options.tun_open == SSH_TUNMODE_POINTOPOINT)
1869 channel_register_filter(ssh, c->self, sys_tun_infilter,
1870 sys_tun_outfilter, NULL, NULL);
1871 #endif
1872
1873 if (cb != NULL)
1874 channel_register_open_confirm(ssh, c->self, cb, cbctx);
1875
1876 if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN)) != 0 ||
1877 (r = sshpkt_put_cstring(ssh, "tun@openssh.com")) != 0 ||
1878 (r = sshpkt_put_u32(ssh, c->self)) != 0 ||
1879 (r = sshpkt_put_u32(ssh, c->local_window_max)) != 0 ||
1880 (r = sshpkt_put_u32(ssh, c->local_maxpacket)) != 0 ||
1881 (r = sshpkt_put_u32(ssh, tun_mode)) != 0 ||
1882 (r = sshpkt_put_u32(ssh, remote_tun)) != 0 ||
1883 (r = sshpkt_send(ssh)) != 0)
1884 sshpkt_fatal(ssh, r, "%s: send reply", __func__);
1885
1886 return ifname;
1887 }
1888
1889 /* XXXX move to generic input handler */
1890 static int
client_input_channel_open(int type,u_int32_t seq,struct ssh * ssh)1891 client_input_channel_open(int type, u_int32_t seq, struct ssh *ssh)
1892 {
1893 Channel *c = NULL;
1894 char *ctype = NULL;
1895 int r;
1896 u_int rchan;
1897 size_t len;
1898 u_int rmaxpack, rwindow;
1899
1900 if ((r = sshpkt_get_cstring(ssh, &ctype, &len)) != 0 ||
1901 (r = sshpkt_get_u32(ssh, &rchan)) != 0 ||
1902 (r = sshpkt_get_u32(ssh, &rwindow)) != 0 ||
1903 (r = sshpkt_get_u32(ssh, &rmaxpack)) != 0)
1904 goto out;
1905
1906 debug("client_input_channel_open: ctype %s rchan %d win %d max %d",
1907 ctype, rchan, rwindow, rmaxpack);
1908
1909 if (strcmp(ctype, "forwarded-tcpip") == 0) {
1910 c = client_request_forwarded_tcpip(ssh, ctype, rchan, rwindow,
1911 rmaxpack);
1912 } else if (strcmp(ctype, "forwarded-streamlocal@openssh.com") == 0) {
1913 c = client_request_forwarded_streamlocal(ssh, ctype, rchan);
1914 } else if (strcmp(ctype, "x11") == 0) {
1915 c = client_request_x11(ssh, ctype, rchan);
1916 } else if (strcmp(ctype, "auth-agent@openssh.com") == 0) {
1917 c = client_request_agent(ssh, ctype, rchan);
1918 }
1919 if (c != NULL && c->type == SSH_CHANNEL_MUX_CLIENT) {
1920 debug3("proxied to downstream: %s", ctype);
1921 } else if (c != NULL) {
1922 debug("confirm %s", ctype);
1923 c->remote_id = rchan;
1924 c->have_remote_id = 1;
1925 c->remote_window = rwindow;
1926 c->remote_maxpacket = rmaxpack;
1927 if (c->type != SSH_CHANNEL_CONNECTING) {
1928 if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN_CONFIRMATION)) != 0 ||
1929 (r = sshpkt_put_u32(ssh, c->remote_id)) != 0 ||
1930 (r = sshpkt_put_u32(ssh, c->self)) != 0 ||
1931 (r = sshpkt_put_u32(ssh, c->local_window)) != 0 ||
1932 (r = sshpkt_put_u32(ssh, c->local_maxpacket)) != 0 ||
1933 (r = sshpkt_send(ssh)) != 0)
1934 sshpkt_fatal(ssh, r, "%s: send reply", __func__);
1935 }
1936 } else {
1937 debug("failure %s", ctype);
1938 if ((r = sshpkt_start(ssh, SSH2_MSG_CHANNEL_OPEN_FAILURE)) != 0 ||
1939 (r = sshpkt_put_u32(ssh, rchan)) != 0 ||
1940 (r = sshpkt_put_u32(ssh, SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED)) != 0 ||
1941 (r = sshpkt_put_cstring(ssh, "open failed")) != 0 ||
1942 (r = sshpkt_put_cstring(ssh, "")) != 0 ||
1943 (r = sshpkt_send(ssh)) != 0)
1944 sshpkt_fatal(ssh, r, "%s: send failure", __func__);
1945 }
1946 r = 0;
1947 out:
1948 free(ctype);
1949 return r;
1950 }
1951
1952 static int
client_input_channel_req(int type,u_int32_t seq,struct ssh * ssh)1953 client_input_channel_req(int type, u_int32_t seq, struct ssh *ssh)
1954 {
1955 Channel *c = NULL;
1956 char *rtype = NULL;
1957 u_char reply;
1958 u_int id, exitval;
1959 int r, success = 0;
1960
1961 if ((r = sshpkt_get_u32(ssh, &id)) != 0)
1962 return r;
1963 if (id <= INT_MAX)
1964 c = channel_lookup(ssh, id);
1965 if (channel_proxy_upstream(c, type, seq, ssh))
1966 return 0;
1967 if ((r = sshpkt_get_cstring(ssh, &rtype, NULL)) != 0 ||
1968 (r = sshpkt_get_u8(ssh, &reply)) != 0)
1969 goto out;
1970
1971 debug("client_input_channel_req: channel %u rtype %s reply %d",
1972 id, rtype, reply);
1973
1974 if (c == NULL) {
1975 error("client_input_channel_req: channel %d: "
1976 "unknown channel", id);
1977 } else if (strcmp(rtype, "eow@openssh.com") == 0) {
1978 if ((r = sshpkt_get_end(ssh)) != 0)
1979 goto out;
1980 chan_rcvd_eow(ssh, c);
1981 } else if (strcmp(rtype, "exit-status") == 0) {
1982 if ((r = sshpkt_get_u32(ssh, &exitval)) != 0)
1983 goto out;
1984 if (c->ctl_chan != -1) {
1985 mux_exit_message(ssh, c, exitval);
1986 success = 1;
1987 } else if ((int)id == session_ident) {
1988 /* Record exit value of local session */
1989 success = 1;
1990 exit_status = exitval;
1991 } else {
1992 /* Probably for a mux channel that has already closed */
1993 debug_f("no sink for exit-status on channel %d",
1994 id);
1995 }
1996 if ((r = sshpkt_get_end(ssh)) != 0)
1997 goto out;
1998 }
1999 if (reply && c != NULL && !(c->flags & CHAN_CLOSE_SENT)) {
2000 if (!c->have_remote_id)
2001 fatal_f("channel %d: no remote_id", c->self);
2002 if ((r = sshpkt_start(ssh, success ?
2003 SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE)) != 0 ||
2004 (r = sshpkt_put_u32(ssh, c->remote_id)) != 0 ||
2005 (r = sshpkt_send(ssh)) != 0)
2006 sshpkt_fatal(ssh, r, "%s: send failure", __func__);
2007 }
2008 r = 0;
2009 out:
2010 free(rtype);
2011 return r;
2012 }
2013
2014 struct hostkeys_update_ctx {
2015 /* The hostname and (optionally) IP address string for the server */
2016 char *host_str, *ip_str;
2017
2018 /*
2019 * Keys received from the server and a flag for each indicating
2020 * whether they already exist in known_hosts.
2021 * keys_match is filled in by hostkeys_find() and later (for new
2022 * keys) by client_global_hostkeys_prove_confirm().
2023 */
2024 struct sshkey **keys;
2025 u_int *keys_match; /* mask of HKF_MATCH_* from hostfile.h */
2026 int *keys_verified; /* flag for new keys verified by server */
2027 size_t nkeys, nnew, nincomplete; /* total, new keys, incomplete match */
2028
2029 /*
2030 * Keys that are in known_hosts, but were not present in the update
2031 * from the server (i.e. scheduled to be deleted).
2032 * Filled in by hostkeys_find().
2033 */
2034 struct sshkey **old_keys;
2035 size_t nold;
2036
2037 /* Various special cases. */
2038 int complex_hostspec; /* wildcard or manual pattern-list host name */
2039 int ca_available; /* saw CA key for this host */
2040 int old_key_seen; /* saw old key with other name/addr */
2041 int other_name_seen; /* saw key with other name/addr */
2042 };
2043
2044 static void
hostkeys_update_ctx_free(struct hostkeys_update_ctx * ctx)2045 hostkeys_update_ctx_free(struct hostkeys_update_ctx *ctx)
2046 {
2047 size_t i;
2048
2049 if (ctx == NULL)
2050 return;
2051 for (i = 0; i < ctx->nkeys; i++)
2052 sshkey_free(ctx->keys[i]);
2053 free(ctx->keys);
2054 free(ctx->keys_match);
2055 free(ctx->keys_verified);
2056 for (i = 0; i < ctx->nold; i++)
2057 sshkey_free(ctx->old_keys[i]);
2058 free(ctx->old_keys);
2059 free(ctx->host_str);
2060 free(ctx->ip_str);
2061 free(ctx);
2062 }
2063
2064 /*
2065 * Returns non-zero if a known_hosts hostname list is not of a form that
2066 * can be handled by UpdateHostkeys. These include wildcard hostnames and
2067 * hostnames lists that do not follow the form host[,ip].
2068 */
2069 static int
hostspec_is_complex(const char * hosts)2070 hostspec_is_complex(const char *hosts)
2071 {
2072 char *cp;
2073
2074 /* wildcard */
2075 if (strchr(hosts, '*') != NULL || strchr(hosts, '?') != NULL)
2076 return 1;
2077 /* single host/ip = ok */
2078 if ((cp = strchr(hosts, ',')) == NULL)
2079 return 0;
2080 /* more than two entries on the line */
2081 if (strchr(cp + 1, ',') != NULL)
2082 return 1;
2083 /* XXX maybe parse cp+1 and ensure it is an IP? */
2084 return 0;
2085 }
2086
2087 /* callback to search for ctx->keys in known_hosts */
2088 static int
hostkeys_find(struct hostkey_foreach_line * l,void * _ctx)2089 hostkeys_find(struct hostkey_foreach_line *l, void *_ctx)
2090 {
2091 struct hostkeys_update_ctx *ctx = (struct hostkeys_update_ctx *)_ctx;
2092 size_t i;
2093 struct sshkey **tmp;
2094
2095 if (l->key == NULL)
2096 return 0;
2097 if (l->status != HKF_STATUS_MATCHED) {
2098 /* Record if one of the keys appears on a non-matching line */
2099 for (i = 0; i < ctx->nkeys; i++) {
2100 if (sshkey_equal(l->key, ctx->keys[i])) {
2101 ctx->other_name_seen = 1;
2102 debug3_f("found %s key under different "
2103 "name/addr at %s:%ld",
2104 sshkey_ssh_name(ctx->keys[i]),
2105 l->path, l->linenum);
2106 return 0;
2107 }
2108 }
2109 return 0;
2110 }
2111 /* Don't proceed if revocation or CA markers are present */
2112 /* XXX relax this */
2113 if (l->marker != MRK_NONE) {
2114 debug3_f("hostkeys file %s:%ld has CA/revocation marker",
2115 l->path, l->linenum);
2116 ctx->complex_hostspec = 1;
2117 return 0;
2118 }
2119
2120 /* If CheckHostIP is enabled, then check for mismatched hostname/addr */
2121 if (ctx->ip_str != NULL && strchr(l->hosts, ',') != NULL) {
2122 if ((l->match & HKF_MATCH_HOST) == 0) {
2123 /* Record if address matched a different hostname. */
2124 ctx->other_name_seen = 1;
2125 debug3_f("found address %s against different hostname "
2126 "at %s:%ld", ctx->ip_str, l->path, l->linenum);
2127 return 0;
2128 } else if ((l->match & HKF_MATCH_IP) == 0) {
2129 /* Record if hostname matched a different address. */
2130 ctx->other_name_seen = 1;
2131 debug3_f("found hostname %s against different address "
2132 "at %s:%ld", ctx->host_str, l->path, l->linenum);
2133 }
2134 }
2135
2136 /*
2137 * UpdateHostkeys is skipped for wildcard host names and hostnames
2138 * that contain more than two entries (ssh never writes these).
2139 */
2140 if (hostspec_is_complex(l->hosts)) {
2141 debug3_f("hostkeys file %s:%ld complex host specification",
2142 l->path, l->linenum);
2143 ctx->complex_hostspec = 1;
2144 return 0;
2145 }
2146
2147 /* Mark off keys we've already seen for this host */
2148 for (i = 0; i < ctx->nkeys; i++) {
2149 if (!sshkey_equal(l->key, ctx->keys[i]))
2150 continue;
2151 debug3_f("found %s key at %s:%ld",
2152 sshkey_ssh_name(ctx->keys[i]), l->path, l->linenum);
2153 ctx->keys_match[i] |= l->match;
2154 return 0;
2155 }
2156 /* This line contained a key that not offered by the server */
2157 debug3_f("deprecated %s key at %s:%ld", sshkey_ssh_name(l->key),
2158 l->path, l->linenum);
2159 if ((tmp = recallocarray(ctx->old_keys, ctx->nold, ctx->nold + 1,
2160 sizeof(*ctx->old_keys))) == NULL)
2161 fatal_f("recallocarray failed nold = %zu", ctx->nold);
2162 ctx->old_keys = tmp;
2163 ctx->old_keys[ctx->nold++] = l->key;
2164 l->key = NULL;
2165
2166 return 0;
2167 }
2168
2169 /* callback to search for ctx->old_keys in known_hosts under other names */
2170 static int
hostkeys_check_old(struct hostkey_foreach_line * l,void * _ctx)2171 hostkeys_check_old(struct hostkey_foreach_line *l, void *_ctx)
2172 {
2173 struct hostkeys_update_ctx *ctx = (struct hostkeys_update_ctx *)_ctx;
2174 size_t i;
2175 int hashed;
2176
2177 /* only care about lines that *don't* match the active host spec */
2178 if (l->status == HKF_STATUS_MATCHED || l->key == NULL)
2179 return 0;
2180
2181 hashed = l->match & (HKF_MATCH_HOST_HASHED|HKF_MATCH_IP_HASHED);
2182 for (i = 0; i < ctx->nold; i++) {
2183 if (!sshkey_equal(l->key, ctx->old_keys[i]))
2184 continue;
2185 debug3_f("found deprecated %s key at %s:%ld as %s",
2186 sshkey_ssh_name(ctx->old_keys[i]), l->path, l->linenum,
2187 hashed ? "[HASHED]" : l->hosts);
2188 ctx->old_key_seen = 1;
2189 break;
2190 }
2191 return 0;
2192 }
2193
2194 /*
2195 * Check known_hosts files for deprecated keys under other names. Returns 0
2196 * on success or -1 on failure. Updates ctx->old_key_seen if deprecated keys
2197 * exist under names other than the active hostname/IP.
2198 */
2199 static int
check_old_keys_othernames(struct hostkeys_update_ctx * ctx)2200 check_old_keys_othernames(struct hostkeys_update_ctx *ctx)
2201 {
2202 size_t i;
2203 int r;
2204
2205 debug2_f("checking for %zu deprecated keys", ctx->nold);
2206 for (i = 0; i < options.num_user_hostfiles; i++) {
2207 debug3_f("searching %s for %s / %s",
2208 options.user_hostfiles[i], ctx->host_str,
2209 ctx->ip_str ? ctx->ip_str : "(none)");
2210 if ((r = hostkeys_foreach(options.user_hostfiles[i],
2211 hostkeys_check_old, ctx, ctx->host_str, ctx->ip_str,
2212 HKF_WANT_PARSE_KEY, 0)) != 0) {
2213 if (r == SSH_ERR_SYSTEM_ERROR && errno == ENOENT) {
2214 debug_f("hostkeys file %s does not exist",
2215 options.user_hostfiles[i]);
2216 continue;
2217 }
2218 error_fr(r, "hostkeys_foreach failed for %s",
2219 options.user_hostfiles[i]);
2220 return -1;
2221 }
2222 }
2223 return 0;
2224 }
2225
2226 static void
hostkey_change_preamble(LogLevel loglevel)2227 hostkey_change_preamble(LogLevel loglevel)
2228 {
2229 do_log2(loglevel, "The server has updated its host keys.");
2230 do_log2(loglevel, "These changes were verified by the server's "
2231 "existing trusted key.");
2232 }
2233
2234 static void
update_known_hosts(struct hostkeys_update_ctx * ctx)2235 update_known_hosts(struct hostkeys_update_ctx *ctx)
2236 {
2237 int r, was_raw = 0, first = 1;
2238 int asking = options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK;
2239 LogLevel loglevel = asking ? SYSLOG_LEVEL_INFO : SYSLOG_LEVEL_VERBOSE;
2240 char *fp, *response;
2241 size_t i;
2242 struct stat sb;
2243
2244 for (i = 0; i < ctx->nkeys; i++) {
2245 if (!ctx->keys_verified[i])
2246 continue;
2247 if ((fp = sshkey_fingerprint(ctx->keys[i],
2248 options.fingerprint_hash, SSH_FP_DEFAULT)) == NULL)
2249 fatal_f("sshkey_fingerprint failed");
2250 if (first && asking)
2251 hostkey_change_preamble(loglevel);
2252 do_log2(loglevel, "Learned new hostkey: %s %s",
2253 sshkey_type(ctx->keys[i]), fp);
2254 first = 0;
2255 free(fp);
2256 }
2257 for (i = 0; i < ctx->nold; i++) {
2258 if ((fp = sshkey_fingerprint(ctx->old_keys[i],
2259 options.fingerprint_hash, SSH_FP_DEFAULT)) == NULL)
2260 fatal_f("sshkey_fingerprint failed");
2261 if (first && asking)
2262 hostkey_change_preamble(loglevel);
2263 do_log2(loglevel, "Deprecating obsolete hostkey: %s %s",
2264 sshkey_type(ctx->old_keys[i]), fp);
2265 first = 0;
2266 free(fp);
2267 }
2268 if (options.update_hostkeys == SSH_UPDATE_HOSTKEYS_ASK) {
2269 if (get_saved_tio() != NULL) {
2270 leave_raw_mode(1);
2271 was_raw = 1;
2272 }
2273 response = NULL;
2274 for (i = 0; !quit_pending && i < 3; i++) {
2275 free(response);
2276 response = read_passphrase("Accept updated hostkeys? "
2277 "(yes/no): ", RP_ECHO);
2278 if (response != NULL && strcasecmp(response, "yes") == 0)
2279 break;
2280 else if (quit_pending || response == NULL ||
2281 strcasecmp(response, "no") == 0) {
2282 options.update_hostkeys = 0;
2283 break;
2284 } else {
2285 do_log2(loglevel, "Please enter "
2286 "\"yes\" or \"no\"");
2287 }
2288 }
2289 if (quit_pending || i >= 3 || response == NULL)
2290 options.update_hostkeys = 0;
2291 free(response);
2292 if (was_raw)
2293 enter_raw_mode(1);
2294 }
2295 if (options.update_hostkeys == 0)
2296 return;
2297 /*
2298 * Now that all the keys are verified, we can go ahead and replace
2299 * them in known_hosts (assuming SSH_UPDATE_HOSTKEYS_ASK didn't
2300 * cancel the operation).
2301 */
2302 for (i = 0; i < options.num_user_hostfiles; i++) {
2303 /*
2304 * NB. keys are only added to hostfiles[0], for the rest we
2305 * just delete the hostname entries.
2306 */
2307 if (stat(options.user_hostfiles[i], &sb) != 0) {
2308 if (errno == ENOENT) {
2309 debug_f("known hosts file %s does not "
2310 "exist", options.user_hostfiles[i]);
2311 } else {
2312 error_f("known hosts file %s "
2313 "inaccessible: %s",
2314 options.user_hostfiles[i], strerror(errno));
2315 }
2316 continue;
2317 }
2318 if ((r = hostfile_replace_entries(options.user_hostfiles[i],
2319 ctx->host_str, ctx->ip_str,
2320 i == 0 ? ctx->keys : NULL, i == 0 ? ctx->nkeys : 0,
2321 options.hash_known_hosts, 0,
2322 options.fingerprint_hash)) != 0) {
2323 error_fr(r, "hostfile_replace_entries failed for %s",
2324 options.user_hostfiles[i]);
2325 }
2326 }
2327 }
2328
2329 static void
client_global_hostkeys_prove_confirm(struct ssh * ssh,int type,u_int32_t seq,void * _ctx)2330 client_global_hostkeys_prove_confirm(struct ssh *ssh, int type,
2331 u_int32_t seq, void *_ctx)
2332 {
2333 struct hostkeys_update_ctx *ctx = (struct hostkeys_update_ctx *)_ctx;
2334 size_t i, ndone;
2335 struct sshbuf *signdata;
2336 int r, plaintype;
2337 const u_char *sig;
2338 const char *rsa_kexalg = NULL;
2339 char *alg = NULL;
2340 size_t siglen;
2341
2342 if (ctx->nnew == 0)
2343 fatal_f("ctx->nnew == 0"); /* sanity */
2344 if (type != SSH2_MSG_REQUEST_SUCCESS) {
2345 error("Server failed to confirm ownership of "
2346 "private host keys");
2347 hostkeys_update_ctx_free(ctx);
2348 return;
2349 }
2350 if (sshkey_type_plain(sshkey_type_from_name(
2351 ssh->kex->hostkey_alg)) == KEY_RSA)
2352 rsa_kexalg = ssh->kex->hostkey_alg;
2353 if ((signdata = sshbuf_new()) == NULL)
2354 fatal_f("sshbuf_new failed");
2355 /*
2356 * Expect a signature for each of the ctx->nnew private keys we
2357 * haven't seen before. They will be in the same order as the
2358 * ctx->keys where the corresponding ctx->keys_match[i] == 0.
2359 */
2360 for (ndone = i = 0; i < ctx->nkeys; i++) {
2361 if (ctx->keys_match[i])
2362 continue;
2363 plaintype = sshkey_type_plain(ctx->keys[i]->type);
2364 /* Prepare data to be signed: session ID, unique string, key */
2365 sshbuf_reset(signdata);
2366 if ( (r = sshbuf_put_cstring(signdata,
2367 "hostkeys-prove-00@openssh.com")) != 0 ||
2368 (r = sshbuf_put_stringb(signdata,
2369 ssh->kex->session_id)) != 0 ||
2370 (r = sshkey_puts(ctx->keys[i], signdata)) != 0)
2371 fatal_fr(r, "compose signdata");
2372 /* Extract and verify signature */
2373 if ((r = sshpkt_get_string_direct(ssh, &sig, &siglen)) != 0) {
2374 error_fr(r, "parse sig");
2375 goto out;
2376 }
2377 if ((r = sshkey_get_sigtype(sig, siglen, &alg)) != 0) {
2378 error_fr(r, "server gave unintelligible signature "
2379 "for %s key %zu", sshkey_type(ctx->keys[i]), i);
2380 goto out;
2381 }
2382 /*
2383 * Special case for RSA keys: if a RSA hostkey was negotiated,
2384 * then use its signature type for verification of RSA hostkey
2385 * proofs. Otherwise, accept only RSA-SHA256/512 signatures.
2386 */
2387 if (plaintype == KEY_RSA && rsa_kexalg == NULL &&
2388 match_pattern_list(alg, HOSTKEY_PROOF_RSA_ALGS, 0) != 1) {
2389 debug_f("server used untrusted RSA signature algorithm "
2390 "%s for key %zu, disregarding", alg, i);
2391 free(alg);
2392 /* zap the key from the list */
2393 sshkey_free(ctx->keys[i]);
2394 ctx->keys[i] = NULL;
2395 ndone++;
2396 continue;
2397 }
2398 debug3_f("verify %s key %zu using sigalg %s",
2399 sshkey_type(ctx->keys[i]), i, alg);
2400 free(alg);
2401 if ((r = sshkey_verify(ctx->keys[i], sig, siglen,
2402 sshbuf_ptr(signdata), sshbuf_len(signdata),
2403 plaintype == KEY_RSA ? rsa_kexalg : NULL, 0, NULL)) != 0) {
2404 error_fr(r, "server gave bad signature for %s key %zu",
2405 sshkey_type(ctx->keys[i]), i);
2406 goto out;
2407 }
2408 /* Key is good. Mark it as 'seen' */
2409 ctx->keys_verified[i] = 1;
2410 ndone++;
2411 }
2412 /* Shouldn't happen */
2413 if (ndone != ctx->nnew)
2414 fatal_f("ndone != ctx->nnew (%zu / %zu)", ndone, ctx->nnew);
2415 if ((r = sshpkt_get_end(ssh)) != 0) {
2416 error_f("protocol error");
2417 goto out;
2418 }
2419
2420 /* Make the edits to known_hosts */
2421 update_known_hosts(ctx);
2422 out:
2423 hostkeys_update_ctx_free(ctx);
2424 hostkeys_update_complete = 1;
2425 client_repledge();
2426 }
2427
2428 /*
2429 * Handle hostkeys-00@openssh.com global request to inform the client of all
2430 * the server's hostkeys. The keys are checked against the user's
2431 * HostkeyAlgorithms preference before they are accepted.
2432 */
2433 static int
client_input_hostkeys(struct ssh * ssh)2434 client_input_hostkeys(struct ssh *ssh)
2435 {
2436 const u_char *blob = NULL;
2437 size_t i, len = 0;
2438 struct sshbuf *buf = NULL;
2439 struct sshkey *key = NULL, **tmp;
2440 int r, prove_sent = 0;
2441 char *fp;
2442 static int hostkeys_seen = 0; /* XXX use struct ssh */
2443 extern struct sockaddr_storage hostaddr; /* XXX from ssh.c */
2444 struct hostkeys_update_ctx *ctx = NULL;
2445 u_int want;
2446
2447 if (hostkeys_seen)
2448 fatal_f("server already sent hostkeys");
2449 if (!can_update_hostkeys())
2450 return 1;
2451 hostkeys_seen = 1;
2452
2453 ctx = xcalloc(1, sizeof(*ctx));
2454 while (ssh_packet_remaining(ssh) > 0) {
2455 sshkey_free(key);
2456 key = NULL;
2457 if ((r = sshpkt_get_string_direct(ssh, &blob, &len)) != 0) {
2458 error_fr(r, "parse key");
2459 goto out;
2460 }
2461 if ((r = sshkey_from_blob(blob, len, &key)) != 0) {
2462 do_log2_fr(r, r == SSH_ERR_KEY_TYPE_UNKNOWN ?
2463 SYSLOG_LEVEL_DEBUG1 : SYSLOG_LEVEL_ERROR,
2464 "convert key");
2465 continue;
2466 }
2467 fp = sshkey_fingerprint(key, options.fingerprint_hash,
2468 SSH_FP_DEFAULT);
2469 debug3_f("received %s key %s", sshkey_type(key), fp);
2470 free(fp);
2471
2472 if (!hostkey_accepted_by_hostkeyalgs(key)) {
2473 debug3_f("%s key not permitted by "
2474 "HostkeyAlgorithms", sshkey_ssh_name(key));
2475 continue;
2476 }
2477 /* Skip certs */
2478 if (sshkey_is_cert(key)) {
2479 debug3_f("%s key is a certificate; skipping",
2480 sshkey_ssh_name(key));
2481 continue;
2482 }
2483 /* Ensure keys are unique */
2484 for (i = 0; i < ctx->nkeys; i++) {
2485 if (sshkey_equal(key, ctx->keys[i])) {
2486 error_f("received duplicated %s host key",
2487 sshkey_ssh_name(key));
2488 goto out;
2489 }
2490 }
2491 /* Key is good, record it */
2492 if ((tmp = recallocarray(ctx->keys, ctx->nkeys, ctx->nkeys + 1,
2493 sizeof(*ctx->keys))) == NULL)
2494 fatal_f("recallocarray failed nkeys = %zu",
2495 ctx->nkeys);
2496 ctx->keys = tmp;
2497 ctx->keys[ctx->nkeys++] = key;
2498 key = NULL;
2499 }
2500
2501 if (ctx->nkeys == 0) {
2502 debug_f("server sent no hostkeys");
2503 goto out;
2504 }
2505
2506 if ((ctx->keys_match = calloc(ctx->nkeys,
2507 sizeof(*ctx->keys_match))) == NULL ||
2508 (ctx->keys_verified = calloc(ctx->nkeys,
2509 sizeof(*ctx->keys_verified))) == NULL)
2510 fatal_f("calloc failed");
2511
2512 get_hostfile_hostname_ipaddr(host,
2513 options.check_host_ip ? (struct sockaddr *)&hostaddr : NULL,
2514 options.port, &ctx->host_str,
2515 options.check_host_ip ? &ctx->ip_str : NULL);
2516
2517 /* Find which keys we already know about. */
2518 for (i = 0; i < options.num_user_hostfiles; i++) {
2519 debug_f("searching %s for %s / %s",
2520 options.user_hostfiles[i], ctx->host_str,
2521 ctx->ip_str ? ctx->ip_str : "(none)");
2522 if ((r = hostkeys_foreach(options.user_hostfiles[i],
2523 hostkeys_find, ctx, ctx->host_str, ctx->ip_str,
2524 HKF_WANT_PARSE_KEY, 0)) != 0) {
2525 if (r == SSH_ERR_SYSTEM_ERROR && errno == ENOENT) {
2526 debug_f("hostkeys file %s does not exist",
2527 options.user_hostfiles[i]);
2528 continue;
2529 }
2530 error_fr(r, "hostkeys_foreach failed for %s",
2531 options.user_hostfiles[i]);
2532 goto out;
2533 }
2534 }
2535
2536 /* Figure out if we have any new keys to add */
2537 ctx->nnew = ctx->nincomplete = 0;
2538 want = HKF_MATCH_HOST | ( options.check_host_ip ? HKF_MATCH_IP : 0);
2539 for (i = 0; i < ctx->nkeys; i++) {
2540 if (ctx->keys_match[i] == 0)
2541 ctx->nnew++;
2542 if ((ctx->keys_match[i] & want) != want)
2543 ctx->nincomplete++;
2544 }
2545
2546 debug3_f("%zu server keys: %zu new, %zu retained, "
2547 "%zu incomplete match. %zu to remove", ctx->nkeys, ctx->nnew,
2548 ctx->nkeys - ctx->nnew - ctx->nincomplete,
2549 ctx->nincomplete, ctx->nold);
2550
2551 if (ctx->nnew == 0 && ctx->nold == 0) {
2552 debug_f("no new or deprecated keys from server");
2553 goto out;
2554 }
2555
2556 /* Various reasons why we cannot proceed with the update */
2557 if (ctx->complex_hostspec) {
2558 debug_f("CA/revocation marker, manual host list or wildcard "
2559 "host pattern found, skipping UserKnownHostsFile update");
2560 goto out;
2561 }
2562 if (ctx->other_name_seen) {
2563 debug_f("host key found matching a different name/address, "
2564 "skipping UserKnownHostsFile update");
2565 goto out;
2566 }
2567 /*
2568 * If removing keys, check whether they appear under different
2569 * names/addresses and refuse to proceed if they do. This avoids
2570 * cases such as hosts with multiple names becoming inconsistent
2571 * with regards to CheckHostIP entries.
2572 * XXX UpdateHostkeys=force to override this (and other) checks?
2573 */
2574 if (ctx->nold != 0) {
2575 if (check_old_keys_othernames(ctx) != 0)
2576 goto out; /* error already logged */
2577 if (ctx->old_key_seen) {
2578 debug_f("key(s) for %s%s%s exist under other names; "
2579 "skipping UserKnownHostsFile update",
2580 ctx->host_str, ctx->ip_str == NULL ? "" : ",",
2581 ctx->ip_str == NULL ? "" : ctx->ip_str);
2582 goto out;
2583 }
2584 }
2585
2586 if (ctx->nnew == 0) {
2587 /*
2588 * We have some keys to remove or fix matching for.
2589 * We can proceed to do this without requiring a fresh proof
2590 * from the server.
2591 */
2592 update_known_hosts(ctx);
2593 goto out;
2594 }
2595 /*
2596 * We have received previously-unseen keys from the server.
2597 * Ask the server to confirm ownership of the private halves.
2598 */
2599 debug3_f("asking server to prove ownership for %zu keys", ctx->nnew);
2600 if ((r = sshpkt_start(ssh, SSH2_MSG_GLOBAL_REQUEST)) != 0 ||
2601 (r = sshpkt_put_cstring(ssh,
2602 "hostkeys-prove-00@openssh.com")) != 0 ||
2603 (r = sshpkt_put_u8(ssh, 1)) != 0) /* bool: want reply */
2604 fatal_fr(r, "prepare hostkeys-prove");
2605 if ((buf = sshbuf_new()) == NULL)
2606 fatal_f("sshbuf_new");
2607 for (i = 0; i < ctx->nkeys; i++) {
2608 if (ctx->keys_match[i])
2609 continue;
2610 sshbuf_reset(buf);
2611 if ((r = sshkey_putb(ctx->keys[i], buf)) != 0 ||
2612 (r = sshpkt_put_stringb(ssh, buf)) != 0)
2613 fatal_fr(r, "assemble hostkeys-prove");
2614 }
2615 if ((r = sshpkt_send(ssh)) != 0)
2616 fatal_fr(r, "send hostkeys-prove");
2617 client_register_global_confirm(
2618 client_global_hostkeys_prove_confirm, ctx);
2619 ctx = NULL; /* will be freed in callback */
2620 prove_sent = 1;
2621
2622 /* Success */
2623 out:
2624 hostkeys_update_ctx_free(ctx);
2625 sshkey_free(key);
2626 sshbuf_free(buf);
2627 if (!prove_sent) {
2628 /* UpdateHostkeys handling completed */
2629 hostkeys_update_complete = 1;
2630 client_repledge();
2631 }
2632 /*
2633 * NB. Return success for all cases. The server doesn't need to know
2634 * what the client does with its hosts file.
2635 */
2636 return 1;
2637 }
2638
2639 static int
client_input_global_request(int type,u_int32_t seq,struct ssh * ssh)2640 client_input_global_request(int type, u_int32_t seq, struct ssh *ssh)
2641 {
2642 char *rtype;
2643 u_char want_reply;
2644 int r, success = 0;
2645
2646 if ((r = sshpkt_get_cstring(ssh, &rtype, NULL)) != 0 ||
2647 (r = sshpkt_get_u8(ssh, &want_reply)) != 0)
2648 goto out;
2649 debug("client_input_global_request: rtype %s want_reply %d",
2650 rtype, want_reply);
2651 if (strcmp(rtype, "hostkeys-00@openssh.com") == 0)
2652 success = client_input_hostkeys(ssh);
2653 if (want_reply) {
2654 if ((r = sshpkt_start(ssh, success ? SSH2_MSG_REQUEST_SUCCESS :
2655 SSH2_MSG_REQUEST_FAILURE)) != 0 ||
2656 (r = sshpkt_send(ssh)) != 0 ||
2657 (r = ssh_packet_write_wait(ssh)) != 0)
2658 goto out;
2659 }
2660 r = 0;
2661 out:
2662 free(rtype);
2663 return r;
2664 }
2665
2666 static void
client_send_env(struct ssh * ssh,int id,const char * name,const char * val)2667 client_send_env(struct ssh *ssh, int id, const char *name, const char *val)
2668 {
2669 int r;
2670
2671 debug("channel %d: setting env %s = \"%s\"", id, name, val);
2672 channel_request_start(ssh, id, "env", 0);
2673 if ((r = sshpkt_put_cstring(ssh, name)) != 0 ||
2674 (r = sshpkt_put_cstring(ssh, val)) != 0 ||
2675 (r = sshpkt_send(ssh)) != 0)
2676 fatal_fr(r, "send setenv");
2677 }
2678
2679 void
client_session2_setup(struct ssh * ssh,int id,int want_tty,int want_subsystem,const char * term,struct termios * tiop,int in_fd,struct sshbuf * cmd,char ** env)2680 client_session2_setup(struct ssh *ssh, int id, int want_tty, int want_subsystem,
2681 const char *term, struct termios *tiop, int in_fd, struct sshbuf *cmd,
2682 char **env)
2683 {
2684 size_t i, j, len;
2685 int matched, r;
2686 char *name, *val;
2687 Channel *c = NULL;
2688
2689 debug2_f("id %d", id);
2690
2691 if ((c = channel_lookup(ssh, id)) == NULL)
2692 fatal_f("channel %d: unknown channel", id);
2693
2694 ssh_packet_set_interactive(ssh, want_tty,
2695 options.ip_qos_interactive, options.ip_qos_bulk);
2696
2697 if (want_tty) {
2698 struct winsize ws;
2699
2700 /* Store window size in the packet. */
2701 if (ioctl(in_fd, TIOCGWINSZ, &ws) == -1)
2702 memset(&ws, 0, sizeof(ws));
2703
2704 channel_request_start(ssh, id, "pty-req", 1);
2705 client_expect_confirm(ssh, id, "PTY allocation", CONFIRM_TTY);
2706 if ((r = sshpkt_put_cstring(ssh, term != NULL ? term : ""))
2707 != 0 ||
2708 (r = sshpkt_put_u32(ssh, (u_int)ws.ws_col)) != 0 ||
2709 (r = sshpkt_put_u32(ssh, (u_int)ws.ws_row)) != 0 ||
2710 (r = sshpkt_put_u32(ssh, (u_int)ws.ws_xpixel)) != 0 ||
2711 (r = sshpkt_put_u32(ssh, (u_int)ws.ws_ypixel)) != 0)
2712 fatal_fr(r, "build pty-req");
2713 if (tiop == NULL)
2714 tiop = get_saved_tio();
2715 ssh_tty_make_modes(ssh, -1, tiop);
2716 if ((r = sshpkt_send(ssh)) != 0)
2717 fatal_fr(r, "send pty-req");
2718 /* XXX wait for reply */
2719 c->client_tty = 1;
2720 }
2721
2722 /* Transfer any environment variables from client to server */
2723 if (options.num_send_env != 0 && env != NULL) {
2724 debug("Sending environment.");
2725 for (i = 0; env[i] != NULL; i++) {
2726 /* Split */
2727 name = xstrdup(env[i]);
2728 if ((val = strchr(name, '=')) == NULL) {
2729 free(name);
2730 continue;
2731 }
2732 *val++ = '\0';
2733
2734 matched = 0;
2735 for (j = 0; j < options.num_send_env; j++) {
2736 if (match_pattern(name, options.send_env[j])) {
2737 matched = 1;
2738 break;
2739 }
2740 }
2741 if (!matched) {
2742 debug3("Ignored env %s", name);
2743 free(name);
2744 continue;
2745 }
2746 client_send_env(ssh, id, name, val);
2747 free(name);
2748 }
2749 }
2750 for (i = 0; i < options.num_setenv; i++) {
2751 /* Split */
2752 name = xstrdup(options.setenv[i]);
2753 if ((val = strchr(name, '=')) == NULL) {
2754 free(name);
2755 continue;
2756 }
2757 *val++ = '\0';
2758 client_send_env(ssh, id, name, val);
2759 free(name);
2760 }
2761
2762 len = sshbuf_len(cmd);
2763 if (len > 0) {
2764 if (len > 900)
2765 len = 900;
2766 if (want_subsystem) {
2767 debug("Sending subsystem: %.*s",
2768 (int)len, (const u_char*)sshbuf_ptr(cmd));
2769 channel_request_start(ssh, id, "subsystem", 1);
2770 client_expect_confirm(ssh, id, "subsystem",
2771 CONFIRM_CLOSE);
2772 } else {
2773 debug("Sending command: %.*s",
2774 (int)len, (const u_char*)sshbuf_ptr(cmd));
2775 channel_request_start(ssh, id, "exec", 1);
2776 client_expect_confirm(ssh, id, "exec", CONFIRM_CLOSE);
2777 }
2778 if ((r = sshpkt_put_stringb(ssh, cmd)) != 0 ||
2779 (r = sshpkt_send(ssh)) != 0)
2780 fatal_fr(r, "send command");
2781 } else {
2782 channel_request_start(ssh, id, "shell", 1);
2783 client_expect_confirm(ssh, id, "shell", CONFIRM_CLOSE);
2784 if ((r = sshpkt_send(ssh)) != 0)
2785 fatal_fr(r, "send shell");
2786 }
2787
2788 session_setup_complete = 1;
2789 client_repledge();
2790 }
2791
2792 static void
client_init_dispatch(struct ssh * ssh)2793 client_init_dispatch(struct ssh *ssh)
2794 {
2795 ssh_dispatch_init(ssh, &dispatch_protocol_error);
2796
2797 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose);
2798 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_DATA, &channel_input_data);
2799 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_EOF, &channel_input_ieof);
2800 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data);
2801 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN, &client_input_channel_open);
2802 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation);
2803 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure);
2804 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_REQUEST, &client_input_channel_req);
2805 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust);
2806 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_SUCCESS, &channel_input_status_confirm);
2807 ssh_dispatch_set(ssh, SSH2_MSG_CHANNEL_FAILURE, &channel_input_status_confirm);
2808 ssh_dispatch_set(ssh, SSH2_MSG_GLOBAL_REQUEST, &client_input_global_request);
2809
2810 /* rekeying */
2811 ssh_dispatch_set(ssh, SSH2_MSG_KEXINIT, &kex_input_kexinit);
2812
2813 /* global request reply messages */
2814 ssh_dispatch_set(ssh, SSH2_MSG_REQUEST_FAILURE, &client_global_request_reply);
2815 ssh_dispatch_set(ssh, SSH2_MSG_REQUEST_SUCCESS, &client_global_request_reply);
2816 }
2817
2818 void
client_stop_mux(void)2819 client_stop_mux(void)
2820 {
2821 if (options.control_path != NULL && muxserver_sock != -1)
2822 unlink(options.control_path);
2823 /*
2824 * If we are in persist mode, or don't have a shell, signal that we
2825 * should close when all active channels are closed.
2826 */
2827 if (options.control_persist || options.session_type == SESSION_TYPE_NONE) {
2828 session_closed = 1;
2829 setproctitle("[stopped mux]");
2830 }
2831 }
2832
2833 /* client specific fatal cleanup */
2834 void
cleanup_exit(int i)2835 cleanup_exit(int i)
2836 {
2837 leave_raw_mode(options.request_tty == REQUEST_TTY_FORCE);
2838 if (options.control_path != NULL && muxserver_sock != -1)
2839 unlink(options.control_path);
2840 ssh_kill_proxy_command();
2841 _exit(i);
2842 }
2843