1 /*-
2 * Generic utility routines for the Common Access Method layer.
3 *
4 * SPDX-License-Identifier: BSD-2-Clause
5 *
6 * Copyright (c) 1997 Justin T. Gibbs.
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions, and the following disclaimer,
14 * without modification, immediately at the beginning of the file.
15 * 2. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 */
30
31 #include <sys/param.h>
32 #ifdef _KERNEL
33 #include <sys/systm.h>
34 #include <sys/kernel.h>
35 #include <sys/memdesc.h>
36 #include <sys/sysctl.h>
37 #else /* _KERNEL */
38 #include <stdlib.h>
39 #include <stdio.h>
40 #include <string.h>
41 #include <camlib.h>
42 #endif /* _KERNEL */
43
44 #include <cam/cam.h>
45 #include <cam/cam_ccb.h>
46 #include <cam/scsi/scsi_all.h>
47 #include <cam/scsi/smp_all.h>
48 #include <sys/sbuf.h>
49
50 #ifdef _KERNEL
51 #include <sys/libkern.h>
52 #include <machine/bus.h>
53 #include <cam/cam_queue.h>
54 #include <cam/cam_xpt.h>
55
56 FEATURE(scbus, "SCSI devices support");
57
58 #endif
59
60 static int camstatusentrycomp(const void *key, const void *member);
61
62 const struct cam_status_entry cam_status_table[] = {
63 { CAM_REQ_INPROG, "CCB request is in progress" },
64 { CAM_REQ_CMP, "CCB request completed without error" },
65 { CAM_REQ_ABORTED, "CCB request aborted by the host" },
66 { CAM_UA_ABORT, "Unable to abort CCB request" },
67 { CAM_REQ_CMP_ERR, "CCB request completed with an error" },
68 { CAM_BUSY, "CAM subsystem is busy" },
69 { CAM_REQ_INVALID, "CCB request was invalid" },
70 { CAM_PATH_INVALID, "Supplied Path ID is invalid" },
71 { CAM_DEV_NOT_THERE, "Device Not Present" },
72 { CAM_UA_TERMIO, "Unable to terminate I/O CCB request" },
73 { CAM_SEL_TIMEOUT, "Selection Timeout" },
74 { CAM_CMD_TIMEOUT, "Command timeout" },
75 { CAM_SCSI_STATUS_ERROR, "SCSI Status Error" },
76 { CAM_MSG_REJECT_REC, "Message Reject Reveived" },
77 { CAM_SCSI_BUS_RESET, "SCSI Bus Reset Sent/Received" },
78 { CAM_UNCOR_PARITY, "Uncorrectable parity/CRC error" },
79 { CAM_AUTOSENSE_FAIL, "Auto-Sense Retrieval Failed" },
80 { CAM_NO_HBA, "No HBA Detected" },
81 { CAM_DATA_RUN_ERR, "Data Overrun error" },
82 { CAM_UNEXP_BUSFREE, "Unexpected Bus Free" },
83 { CAM_SEQUENCE_FAIL, "Target Bus Phase Sequence Failure" },
84 { CAM_CCB_LEN_ERR, "CCB length supplied is inadequate" },
85 { CAM_PROVIDE_FAIL, "Unable to provide requested capability" },
86 { CAM_BDR_SENT, "SCSI BDR Message Sent" },
87 { CAM_REQ_TERMIO, "CCB request terminated by the host" },
88 { CAM_UNREC_HBA_ERROR, "Unrecoverable Host Bus Adapter Error" },
89 { CAM_REQ_TOO_BIG, "The request was too large for this host" },
90 { CAM_REQUEUE_REQ, "Unconditionally Re-queue Request" },
91 { CAM_ATA_STATUS_ERROR, "ATA Status Error" },
92 { CAM_SCSI_IT_NEXUS_LOST,"Initiator/Target Nexus Lost" },
93 { CAM_SMP_STATUS_ERROR, "SMP Status Error" },
94 { CAM_REQ_SOFTTIMEOUT, "Completed w/o error, but took too long" },
95 { CAM_NVME_STATUS_ERROR, "NVME Status Error" },
96 { CAM_IDE, "Initiator Detected Error Message Received" },
97 { CAM_RESRC_UNAVAIL, "Resource Unavailable" },
98 { CAM_UNACKED_EVENT, "Unacknowledged Event by Host" },
99 { CAM_MESSAGE_RECV, "Message Received in Host Target Mode" },
100 { CAM_INVALID_CDB, "Invalid CDB received in Host Target Mode" },
101 { CAM_LUN_INVALID, "Invalid Lun" },
102 { CAM_TID_INVALID, "Invalid Target ID" },
103 { CAM_FUNC_NOTAVAIL, "Function Not Available" },
104 { CAM_NO_NEXUS, "Nexus Not Established" },
105 { CAM_IID_INVALID, "Invalid Initiator ID" },
106 { CAM_CDB_RECVD, "CDB Received" },
107 { CAM_LUN_ALRDY_ENA, "LUN Already Enabled for Target Mode" },
108 { CAM_SCSI_BUSY, "SCSI Bus Busy" },
109 };
110
111 #ifdef _KERNEL
112 SYSCTL_NODE(_kern, OID_AUTO, cam, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
113 "CAM Subsystem");
114
115 #ifndef CAM_DEFAULT_SORT_IO_QUEUES
116 #define CAM_DEFAULT_SORT_IO_QUEUES 1
117 #endif
118
119 int cam_sort_io_queues = CAM_DEFAULT_SORT_IO_QUEUES;
120 SYSCTL_INT(_kern_cam, OID_AUTO, sort_io_queues, CTLFLAG_RWTUN,
121 &cam_sort_io_queues, 0, "Sort IO queues to try and optimise disk access patterns");
122 #endif
123
124 void
cam_strvis(uint8_t * dst,const uint8_t * src,int srclen,int dstlen)125 cam_strvis(uint8_t *dst, const uint8_t *src, int srclen, int dstlen)
126 {
127 cam_strvis_flag(dst, src, srclen, dstlen,
128 CAM_STRVIS_FLAG_NONASCII_ESC);
129 }
130
131 void
cam_strvis_flag(uint8_t * dst,const uint8_t * src,int srclen,int dstlen,uint32_t flags)132 cam_strvis_flag(uint8_t *dst, const uint8_t *src, int srclen, int dstlen,
133 uint32_t flags)
134 {
135 struct sbuf sb;
136
137 sbuf_new(&sb, dst, dstlen, SBUF_FIXEDLEN);
138 cam_strvis_sbuf(&sb, src, srclen, flags);
139 sbuf_finish(&sb);
140 }
141
142 void
cam_strvis_sbuf(struct sbuf * sb,const uint8_t * src,int srclen,uint32_t flags)143 cam_strvis_sbuf(struct sbuf *sb, const uint8_t *src, int srclen,
144 uint32_t flags)
145 {
146
147 /* Trim leading/trailing spaces, nulls. */
148 while (srclen > 0 && src[0] == ' ')
149 src++, srclen--;
150 while (srclen > 0
151 && (src[srclen-1] == ' ' || src[srclen-1] == '\0'))
152 srclen--;
153
154 while (srclen > 0) {
155 if (*src < 0x20 || *src >= 0x80) {
156 /* SCSI-II Specifies that these should never occur. */
157 /* non-printable character */
158 switch (flags & CAM_STRVIS_FLAG_NONASCII_MASK) {
159 case CAM_STRVIS_FLAG_NONASCII_ESC:
160 sbuf_printf(sb, "\\%c%c%c",
161 ((*src & 0300) >> 6) + '0',
162 ((*src & 0070) >> 3) + '0',
163 ((*src & 0007) >> 0) + '0');
164 break;
165 case CAM_STRVIS_FLAG_NONASCII_RAW:
166 /*
167 * If we run into a NUL, just transform it
168 * into a space.
169 */
170 if (*src != 0x00)
171 sbuf_putc(sb, *src);
172 else
173 sbuf_putc(sb, ' ');
174 break;
175 case CAM_STRVIS_FLAG_NONASCII_SPC:
176 sbuf_putc(sb, ' ');
177 break;
178 case CAM_STRVIS_FLAG_NONASCII_TRIM:
179 default:
180 break;
181 }
182 } else {
183 /* normal character */
184 sbuf_putc(sb, *src);
185 }
186 src++;
187 srclen--;
188 }
189 }
190
191 /*
192 * Compare string with pattern, returning 0 on match.
193 * Short pattern matches trailing blanks in name,
194 * Shell globbing rules apply: * matches 0 or more characters,
195 * ? matchces one character, [...] denotes a set to match one char,
196 * [^...] denotes a complimented set to match one character.
197 * Spaces in str used to match anything in the pattern string
198 * but was removed because it's a bug. No current patterns require
199 * it, as far as I know, but it's impossible to know what drives
200 * returned.
201 *
202 * Each '*' generates recursion, so keep the number of * in check.
203 */
204 int
cam_strmatch(const uint8_t * str,const uint8_t * pattern,int str_len)205 cam_strmatch(const uint8_t *str, const uint8_t *pattern, int str_len)
206 {
207
208 while (*pattern != '\0' && str_len > 0) {
209 if (*pattern == '*') {
210 pattern++;
211 if (*pattern == '\0')
212 return (0);
213 do {
214 if (cam_strmatch(str, pattern, str_len) == 0)
215 return (0);
216 str++;
217 str_len--;
218 } while (str_len > 0);
219 return (1);
220 } else if (*pattern == '[') {
221 int negate_range, ok;
222 uint8_t pc = UCHAR_MAX;
223 uint8_t sc;
224
225 ok = 0;
226 sc = *str++;
227 str_len--;
228 pattern++;
229 if ((negate_range = (*pattern == '^')) != 0)
230 pattern++;
231 while ((*pattern != ']') && *pattern != '\0') {
232 if (*pattern == '-') {
233 if (pattern[1] == '\0') /* Bad pattern */
234 return (1);
235 if (sc >= pc && sc <= pattern[1])
236 ok = 1;
237 pattern++;
238 } else if (*pattern == sc)
239 ok = 1;
240 pc = *pattern;
241 pattern++;
242 }
243 if (ok == negate_range)
244 return (1);
245 pattern++;
246 } else if (*pattern == '?') {
247 /*
248 * NB: || *str == ' ' of the old code is a bug and was
249 * removed. If you add it back, keep this the last if
250 * before the naked else */
251 pattern++;
252 str++;
253 str_len--;
254 } else {
255 if (*str != *pattern)
256 return (1);
257 pattern++;
258 str++;
259 str_len--;
260 }
261 }
262
263 /* '*' is allowed to match nothing, so gobble it */
264 while (*pattern == '*')
265 pattern++;
266
267 if ( *pattern != '\0') {
268 /* Pattern not fully consumed. Not a match */
269 return (1);
270 }
271
272 /* Eat trailing spaces, which get added by SAT */
273 while (str_len > 0 && *str == ' ') {
274 str++;
275 str_len--;
276 }
277
278 return (str_len);
279 }
280
281 caddr_t
cam_quirkmatch(caddr_t target,caddr_t quirk_table,int num_entries,int entry_size,cam_quirkmatch_t * comp_func)282 cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
283 int entry_size, cam_quirkmatch_t *comp_func)
284 {
285 for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
286 if ((*comp_func)(target, quirk_table) == 0)
287 return (quirk_table);
288 }
289 return (NULL);
290 }
291
292 const struct cam_status_entry*
cam_fetch_status_entry(cam_status status)293 cam_fetch_status_entry(cam_status status)
294 {
295 status &= CAM_STATUS_MASK;
296 return (bsearch(&status, &cam_status_table,
297 nitems(cam_status_table),
298 sizeof(*cam_status_table),
299 camstatusentrycomp));
300 }
301
302 static int
camstatusentrycomp(const void * key,const void * member)303 camstatusentrycomp(const void *key, const void *member)
304 {
305 cam_status status;
306 const struct cam_status_entry *table_entry;
307
308 status = *(const cam_status *)key;
309 table_entry = (const struct cam_status_entry *)member;
310
311 return (status - table_entry->status_code);
312 }
313
314 #ifdef _KERNEL
315 char *
cam_error_string(union ccb * ccb,char * str,int str_len,cam_error_string_flags flags,cam_error_proto_flags proto_flags)316 cam_error_string(union ccb *ccb, char *str, int str_len,
317 cam_error_string_flags flags,
318 cam_error_proto_flags proto_flags)
319 #else /* !_KERNEL */
320 char *
321 cam_error_string(struct cam_device *device, union ccb *ccb, char *str,
322 int str_len, cam_error_string_flags flags,
323 cam_error_proto_flags proto_flags)
324 #endif /* _KERNEL/!_KERNEL */
325 {
326 char path_str[64];
327 struct sbuf sb;
328
329 if ((ccb == NULL)
330 || (str == NULL)
331 || (str_len <= 0))
332 return(NULL);
333
334 if (flags == CAM_ESF_NONE)
335 return(NULL);
336
337 switch (ccb->ccb_h.func_code) {
338 case XPT_ATA_IO:
339 switch (proto_flags & CAM_EPF_LEVEL_MASK) {
340 case CAM_EPF_NONE:
341 break;
342 case CAM_EPF_ALL:
343 case CAM_EPF_NORMAL:
344 proto_flags |= CAM_EAF_PRINT_RESULT;
345 /* FALLTHROUGH */
346 case CAM_EPF_MINIMAL:
347 proto_flags |= CAM_EAF_PRINT_STATUS;
348 /* FALLTHROUGH */
349 default:
350 break;
351 }
352 break;
353 case XPT_SCSI_IO:
354 switch (proto_flags & CAM_EPF_LEVEL_MASK) {
355 case CAM_EPF_NONE:
356 break;
357 case CAM_EPF_ALL:
358 case CAM_EPF_NORMAL:
359 proto_flags |= CAM_ESF_PRINT_SENSE;
360 /* FALLTHROUGH */
361 case CAM_EPF_MINIMAL:
362 proto_flags |= CAM_ESF_PRINT_STATUS;
363 /* FALLTHROUGH */
364 default:
365 break;
366 }
367 break;
368 case XPT_SMP_IO:
369 switch (proto_flags & CAM_EPF_LEVEL_MASK) {
370 case CAM_EPF_NONE:
371 break;
372 case CAM_EPF_ALL:
373 proto_flags |= CAM_ESMF_PRINT_FULL_CMD;
374 /* FALLTHROUGH */
375 case CAM_EPF_NORMAL:
376 case CAM_EPF_MINIMAL:
377 proto_flags |= CAM_ESMF_PRINT_STATUS;
378 /* FALLTHROUGH */
379 default:
380 break;
381 }
382 break;
383 default:
384 break;
385 }
386 #ifdef _KERNEL
387 xpt_path_string(ccb->csio.ccb_h.path, path_str, sizeof(path_str));
388 #else /* !_KERNEL */
389 cam_path_string(device, path_str, sizeof(path_str));
390 #endif /* _KERNEL/!_KERNEL */
391
392 sbuf_new(&sb, str, str_len, 0);
393
394 if (flags & CAM_ESF_COMMAND) {
395 sbuf_cat(&sb, path_str);
396 switch (ccb->ccb_h.func_code) {
397 case XPT_ATA_IO:
398 ata_command_sbuf(&ccb->ataio, &sb);
399 break;
400 case XPT_SCSI_IO:
401 #ifdef _KERNEL
402 scsi_command_string(&ccb->csio, &sb);
403 #else /* !_KERNEL */
404 scsi_command_string(device, &ccb->csio, &sb);
405 #endif /* _KERNEL/!_KERNEL */
406 break;
407 case XPT_SMP_IO:
408 smp_command_sbuf(&ccb->smpio, &sb, path_str, 79 -
409 strlen(path_str), (proto_flags &
410 CAM_ESMF_PRINT_FULL_CMD) ? 79 : 0);
411 break;
412 case XPT_NVME_IO:
413 case XPT_NVME_ADMIN:
414 nvme_command_sbuf(&ccb->nvmeio, &sb);
415 break;
416 default:
417 sbuf_printf(&sb, "CAM func %#x",
418 ccb->ccb_h.func_code);
419 break;
420 }
421 sbuf_putc(&sb, '\n');
422 }
423
424 if (flags & CAM_ESF_CAM_STATUS) {
425 cam_status status;
426 const struct cam_status_entry *entry;
427
428 sbuf_cat(&sb, path_str);
429
430 status = ccb->ccb_h.status & CAM_STATUS_MASK;
431
432 entry = cam_fetch_status_entry(status);
433
434 if (entry == NULL)
435 sbuf_printf(&sb, "CAM status: Unknown (%#x)\n",
436 ccb->ccb_h.status);
437 else
438 sbuf_printf(&sb, "CAM status: %s\n",
439 entry->status_text);
440 }
441
442 if (flags & CAM_ESF_PROTO_STATUS) {
443
444 switch (ccb->ccb_h.func_code) {
445 case XPT_ATA_IO:
446 if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
447 CAM_ATA_STATUS_ERROR)
448 break;
449 if (proto_flags & CAM_EAF_PRINT_STATUS) {
450 sbuf_cat(&sb, path_str);
451 ata_status_sbuf(&ccb->ataio, &sb);
452 sbuf_putc(&sb, '\n');
453 }
454 if (proto_flags & CAM_EAF_PRINT_RESULT) {
455 sbuf_cat(&sb, path_str);
456 sbuf_cat(&sb, "RES: ");
457 ata_res_sbuf(&ccb->ataio.res, &sb);
458 sbuf_putc(&sb, '\n');
459 }
460
461 break;
462 case XPT_SCSI_IO:
463 if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
464 CAM_SCSI_STATUS_ERROR)
465 break;
466
467 if (proto_flags & CAM_ESF_PRINT_STATUS) {
468 sbuf_cat(&sb, path_str);
469 sbuf_printf(&sb, "SCSI status: %s\n",
470 scsi_status_string(&ccb->csio));
471 }
472
473 if ((proto_flags & CAM_ESF_PRINT_SENSE)
474 && (ccb->csio.scsi_status == SCSI_STATUS_CHECK_COND)
475 && (ccb->ccb_h.status & CAM_AUTOSNS_VALID)) {
476 #ifdef _KERNEL
477 scsi_sense_sbuf(&ccb->csio, &sb,
478 SSS_FLAG_NONE);
479 #else /* !_KERNEL */
480 scsi_sense_sbuf(device, &ccb->csio, &sb,
481 SSS_FLAG_NONE);
482 #endif /* _KERNEL/!_KERNEL */
483 }
484 break;
485 case XPT_SMP_IO:
486 if ((ccb->ccb_h.status & CAM_STATUS_MASK) !=
487 CAM_SMP_STATUS_ERROR)
488 break;
489
490 if (proto_flags & CAM_ESF_PRINT_STATUS) {
491 sbuf_cat(&sb, path_str);
492 sbuf_printf(&sb, "SMP status: %s (%#x)\n",
493 smp_error_desc(ccb->smpio.smp_response[2]),
494 ccb->smpio.smp_response[2]);
495 }
496 /* There is no SMP equivalent to SCSI sense. */
497 break;
498 default:
499 break;
500 }
501 }
502
503 sbuf_finish(&sb);
504
505 return(sbuf_data(&sb));
506 }
507
508 #ifdef _KERNEL
509
510 void
cam_error_print(union ccb * ccb,cam_error_string_flags flags,cam_error_proto_flags proto_flags)511 cam_error_print(union ccb *ccb, cam_error_string_flags flags,
512 cam_error_proto_flags proto_flags)
513 {
514 char str[512];
515
516 printf("%s", cam_error_string(ccb, str, sizeof(str), flags,
517 proto_flags));
518 }
519
520 #else /* !_KERNEL */
521
522 void
cam_error_print(struct cam_device * device,union ccb * ccb,cam_error_string_flags flags,cam_error_proto_flags proto_flags,FILE * ofile)523 cam_error_print(struct cam_device *device, union ccb *ccb,
524 cam_error_string_flags flags, cam_error_proto_flags proto_flags,
525 FILE *ofile)
526 {
527 char str[512];
528
529 if ((device == NULL) || (ccb == NULL) || (ofile == NULL))
530 return;
531
532 fprintf(ofile, "%s", cam_error_string(device, ccb, str, sizeof(str),
533 flags, proto_flags));
534 }
535
536 #endif /* _KERNEL/!_KERNEL */
537
538 /*
539 * Common calculate geometry fuction
540 *
541 * Caller should set ccg->volume_size and block_size.
542 * The extended parameter should be zero if extended translation
543 * should not be used.
544 */
545 void
cam_calc_geometry(struct ccb_calc_geometry * ccg,int extended)546 cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended)
547 {
548 uint32_t size_mb, secs_per_cylinder;
549
550 if (ccg->block_size == 0) {
551 ccg->ccb_h.status = CAM_REQ_CMP_ERR;
552 return;
553 }
554 size_mb = (1024L * 1024L) / ccg->block_size;
555 if (size_mb == 0) {
556 ccg->ccb_h.status = CAM_REQ_CMP_ERR;
557 return;
558 }
559 size_mb = ccg->volume_size / size_mb;
560 if (size_mb > 1024 && extended) {
561 ccg->heads = 255;
562 ccg->secs_per_track = 63;
563 } else {
564 ccg->heads = 64;
565 ccg->secs_per_track = 32;
566 }
567 secs_per_cylinder = ccg->heads * ccg->secs_per_track;
568 if (secs_per_cylinder == 0) {
569 ccg->ccb_h.status = CAM_REQ_CMP_ERR;
570 return;
571 }
572 ccg->cylinders = ccg->volume_size / secs_per_cylinder;
573 ccg->ccb_h.status = CAM_REQ_CMP;
574 }
575
576 #ifdef _KERNEL
577 struct memdesc
memdesc_ccb(union ccb * ccb)578 memdesc_ccb(union ccb *ccb)
579 {
580 struct ccb_hdr *ccb_h;
581 void *data_ptr;
582 uint32_t dxfer_len;
583 uint16_t sglist_cnt;
584
585 ccb_h = &ccb->ccb_h;
586 switch (ccb_h->func_code) {
587 case XPT_SCSI_IO: {
588 struct ccb_scsiio *csio;
589
590 csio = &ccb->csio;
591 data_ptr = csio->data_ptr;
592 dxfer_len = csio->dxfer_len;
593 sglist_cnt = csio->sglist_cnt;
594 break;
595 }
596 case XPT_CONT_TARGET_IO: {
597 struct ccb_scsiio *ctio;
598
599 ctio = &ccb->ctio;
600 data_ptr = ctio->data_ptr;
601 dxfer_len = ctio->dxfer_len;
602 sglist_cnt = ctio->sglist_cnt;
603 break;
604 }
605 case XPT_ATA_IO: {
606 struct ccb_ataio *ataio;
607
608 ataio = &ccb->ataio;
609 data_ptr = ataio->data_ptr;
610 dxfer_len = ataio->dxfer_len;
611 sglist_cnt = 0;
612 break;
613 }
614 case XPT_NVME_IO:
615 case XPT_NVME_ADMIN: {
616 struct ccb_nvmeio *nvmeio;
617
618 nvmeio = &ccb->nvmeio;
619 data_ptr = nvmeio->data_ptr;
620 dxfer_len = nvmeio->dxfer_len;
621 sglist_cnt = nvmeio->sglist_cnt;
622 break;
623 }
624 default:
625 panic("%s: Unsupported func code %d", __func__,
626 ccb_h->func_code);
627 }
628
629 switch ((ccb_h->flags & CAM_DATA_MASK)) {
630 case CAM_DATA_VADDR:
631 return (memdesc_vaddr(data_ptr, dxfer_len));
632 case CAM_DATA_PADDR:
633 return (memdesc_paddr((vm_paddr_t)(uintptr_t)data_ptr,
634 dxfer_len));
635 case CAM_DATA_SG:
636 return (memdesc_vlist(data_ptr, sglist_cnt));
637 case CAM_DATA_SG_PADDR:
638 return (memdesc_plist(data_ptr, sglist_cnt));
639 case CAM_DATA_BIO:
640 return (memdesc_bio(data_ptr));
641 default:
642 panic("%s: flags 0x%X unimplemented", __func__, ccb_h->flags);
643 }
644 }
645
646 int
bus_dmamap_load_ccb(bus_dma_tag_t dmat,bus_dmamap_t map,union ccb * ccb,bus_dmamap_callback_t * callback,void * callback_arg,int flags)647 bus_dmamap_load_ccb(bus_dma_tag_t dmat, bus_dmamap_t map, union ccb *ccb,
648 bus_dmamap_callback_t *callback, void *callback_arg,
649 int flags)
650 {
651 struct ccb_hdr *ccb_h;
652 struct memdesc mem;
653
654 ccb_h = &ccb->ccb_h;
655 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_NONE) {
656 callback(callback_arg, NULL, 0, 0);
657 return (0);
658 }
659
660 mem = memdesc_ccb(ccb);
661 return (bus_dmamap_load_mem(dmat, map, &mem, callback, callback_arg,
662 flags));
663 }
664 #endif
665