1 /*-
2 * Copyright (c) 2005 Nate Lawson
3 * Copyright (c) 2000 Munehiro Matsuda
4 * Copyright (c) 2000 Takanori Watanabe
5 * Copyright (c) 2000 Mitsuru IWASAKI <iwasaki@FreeBSD.org>
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 */
29
30 #include <sys/cdefs.h>
31 #include "opt_acpi.h"
32 #include <sys/param.h>
33 #include <sys/kernel.h>
34 #include <sys/module.h>
35 #include <sys/bus.h>
36 #include <sys/ioccom.h>
37
38 #include <machine/bus.h>
39 #include <sys/rman.h>
40 #include <sys/malloc.h>
41
42 #include <contrib/dev/acpica/include/acpi.h>
43
44 #include <dev/acpica/acpivar.h>
45 #include <dev/acpica/acpiio.h>
46
47 static MALLOC_DEFINE(M_ACPICMBAT, "acpicmbat",
48 "ACPI control method battery data");
49
50 /* Number of times to retry initialization before giving up. */
51 #define ACPI_CMBAT_RETRY_MAX 6
52
53 /* Check the battery once a minute. */
54 #define CMBAT_POLLRATE (60 * hz)
55
56 /* Hooks for the ACPI CA debugging infrastructure */
57 #define _COMPONENT ACPI_BATTERY
58 ACPI_MODULE_NAME("BATTERY")
59
60 #define ACPI_BATTERY_BST_CHANGE 0x80
61 #define ACPI_BATTERY_BIF_CHANGE 0x81
62 #define ACPI_BATTERY_BIX_CHANGE ACPI_BATTERY_BIF_CHANGE
63
64 struct acpi_cmbat_softc {
65 device_t dev;
66 int flags;
67
68 struct acpi_bix bix;
69 struct acpi_bst bst;
70 struct timespec bst_lastupdated;
71 };
72
73 ACPI_SERIAL_DECL(cmbat, "ACPI cmbat");
74
75 static int acpi_cmbat_probe(device_t dev);
76 static int acpi_cmbat_attach(device_t dev);
77 static int acpi_cmbat_detach(device_t dev);
78 static int acpi_cmbat_resume(device_t dev);
79 static void acpi_cmbat_notify_handler(ACPI_HANDLE h, UINT32 notify,
80 void *context);
81 static int acpi_cmbat_info_expired(struct timespec *lastupdated);
82 static void acpi_cmbat_info_updated(struct timespec *lastupdated);
83 static void acpi_cmbat_get_bst(void *arg);
84 static void acpi_cmbat_get_bix_task(void *arg);
85 static void acpi_cmbat_get_bix(void *arg);
86 static int acpi_cmbat_bst(device_t, struct acpi_bst *);
87 static int acpi_cmbat_bix(device_t, void *, size_t);
88 static void acpi_cmbat_init_battery(void *arg);
89
90 static device_method_t acpi_cmbat_methods[] = {
91 /* Device interface */
92 DEVMETHOD(device_probe, acpi_cmbat_probe),
93 DEVMETHOD(device_attach, acpi_cmbat_attach),
94 DEVMETHOD(device_detach, acpi_cmbat_detach),
95 DEVMETHOD(device_resume, acpi_cmbat_resume),
96
97 /* ACPI battery interface */
98 DEVMETHOD(acpi_batt_get_info, acpi_cmbat_bix),
99 DEVMETHOD(acpi_batt_get_status, acpi_cmbat_bst),
100
101 DEVMETHOD_END
102 };
103
104 static driver_t acpi_cmbat_driver = {
105 "battery",
106 acpi_cmbat_methods,
107 sizeof(struct acpi_cmbat_softc),
108 };
109
110 DRIVER_MODULE(acpi_cmbat, acpi, acpi_cmbat_driver, 0, 0);
111 MODULE_DEPEND(acpi_cmbat, acpi, 1, 1, 1);
112
113 static int
acpi_cmbat_probe(device_t dev)114 acpi_cmbat_probe(device_t dev)
115 {
116 static char *cmbat_ids[] = { "PNP0C0A", NULL };
117 int rv;
118
119 if (acpi_disabled("cmbat"))
120 return (ENXIO);
121 rv = ACPI_ID_PROBE(device_get_parent(dev), dev, cmbat_ids, NULL);
122 if (rv <= 0)
123 device_set_desc(dev, "ACPI Control Method Battery");
124 return (rv);
125 }
126
127 static int
acpi_cmbat_attach(device_t dev)128 acpi_cmbat_attach(device_t dev)
129 {
130 int error;
131 ACPI_HANDLE handle;
132 struct acpi_cmbat_softc *sc;
133
134 sc = device_get_softc(dev);
135 handle = acpi_get_handle(dev);
136 sc->dev = dev;
137
138 timespecclear(&sc->bst_lastupdated);
139
140 error = acpi_battery_register(dev);
141 if (error != 0) {
142 device_printf(dev, "registering battery failed\n");
143 return (error);
144 }
145
146 /*
147 * Install a system notify handler in addition to the device notify.
148 * Toshiba notebook uses this alternate notify for its battery.
149 */
150 AcpiInstallNotifyHandler(handle, ACPI_ALL_NOTIFY,
151 acpi_cmbat_notify_handler, dev);
152
153 AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_cmbat_init_battery, dev);
154
155 return (0);
156 }
157
158 static int
acpi_cmbat_detach(device_t dev)159 acpi_cmbat_detach(device_t dev)
160 {
161 ACPI_HANDLE handle;
162
163 handle = acpi_get_handle(dev);
164 AcpiRemoveNotifyHandler(handle, ACPI_ALL_NOTIFY, acpi_cmbat_notify_handler);
165 acpi_battery_remove(dev);
166
167 /*
168 * Force any pending notification handler calls to complete by
169 * requesting cmbat serialisation while freeing and clearing the
170 * softc pointer:
171 */
172 ACPI_SERIAL_BEGIN(cmbat);
173 device_set_softc(dev, NULL);
174 ACPI_SERIAL_END(cmbat);
175
176 return (0);
177 }
178
179 static int
acpi_cmbat_resume(device_t dev)180 acpi_cmbat_resume(device_t dev)
181 {
182
183 AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_cmbat_init_battery, dev);
184 return (0);
185 }
186
187 static void
acpi_cmbat_notify_handler(ACPI_HANDLE h,UINT32 notify,void * context)188 acpi_cmbat_notify_handler(ACPI_HANDLE h, UINT32 notify, void *context)
189 {
190 struct acpi_cmbat_softc *sc;
191 device_t dev;
192
193 dev = (device_t)context;
194 sc = device_get_softc(dev);
195
196 switch (notify) {
197 case ACPI_NOTIFY_DEVICE_CHECK:
198 case ACPI_BATTERY_BST_CHANGE:
199 /*
200 * Clear the last updated time. The next call to retrieve the
201 * battery status will get the new value for us.
202 */
203 timespecclear(&sc->bst_lastupdated);
204 break;
205 case ACPI_NOTIFY_BUS_CHECK:
206 case ACPI_BATTERY_BIX_CHANGE:
207 /*
208 * Queue a callback to get the current battery info from thread
209 * context. It's not safe to block in a notify handler.
210 */
211 AcpiOsExecute(OSL_NOTIFY_HANDLER, acpi_cmbat_get_bix_task, dev);
212 break;
213 }
214
215 acpi_UserNotify("CMBAT", h, notify);
216 }
217
218 static int
acpi_cmbat_info_expired(struct timespec * lastupdated)219 acpi_cmbat_info_expired(struct timespec *lastupdated)
220 {
221 struct timespec curtime;
222
223 ACPI_SERIAL_ASSERT(cmbat);
224
225 if (lastupdated == NULL)
226 return (TRUE);
227 if (!timespecisset(lastupdated))
228 return (TRUE);
229
230 getnanotime(&curtime);
231 timespecsub(&curtime, lastupdated, &curtime);
232 return (curtime.tv_sec < 0 ||
233 curtime.tv_sec > acpi_battery_get_info_expire());
234 }
235
236 static void
acpi_cmbat_info_updated(struct timespec * lastupdated)237 acpi_cmbat_info_updated(struct timespec *lastupdated)
238 {
239
240 ACPI_SERIAL_ASSERT(cmbat);
241
242 if (lastupdated != NULL)
243 getnanotime(lastupdated);
244 }
245
246 static void
acpi_cmbat_get_bst(void * arg)247 acpi_cmbat_get_bst(void *arg)
248 {
249 struct acpi_cmbat_softc *sc;
250 ACPI_STATUS as;
251 ACPI_OBJECT *res;
252 ACPI_HANDLE h;
253 ACPI_BUFFER bst_buffer;
254 device_t dev;
255
256 ACPI_SERIAL_ASSERT(cmbat);
257
258 dev = arg;
259 sc = device_get_softc(dev);
260 h = acpi_get_handle(dev);
261 bst_buffer.Pointer = NULL;
262 bst_buffer.Length = ACPI_ALLOCATE_BUFFER;
263
264 if (!acpi_cmbat_info_expired(&sc->bst_lastupdated))
265 goto end;
266
267 as = AcpiEvaluateObject(h, "_BST", NULL, &bst_buffer);
268 if (ACPI_FAILURE(as)) {
269 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
270 "error fetching current battery status -- %s\n",
271 AcpiFormatException(as));
272 goto end;
273 }
274
275 res = (ACPI_OBJECT *)bst_buffer.Pointer;
276 if (!ACPI_PKG_VALID(res, 4)) {
277 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
278 "battery status corrupted\n");
279 goto end;
280 }
281
282 if (acpi_PkgInt32(res, 0, &sc->bst.state) != 0)
283 goto end;
284 if (acpi_PkgInt32(res, 1, &sc->bst.rate) != 0)
285 goto end;
286 if (acpi_PkgInt32(res, 2, &sc->bst.cap) != 0)
287 goto end;
288 if (acpi_PkgInt32(res, 3, &sc->bst.volt) != 0)
289 goto end;
290 acpi_cmbat_info_updated(&sc->bst_lastupdated);
291
292 /* Clear out undefined/extended bits that might be set by hardware. */
293 sc->bst.state &= ACPI_BATT_STAT_BST_MASK;
294 if ((sc->bst.state & ACPI_BATT_STAT_INVALID) == ACPI_BATT_STAT_INVALID)
295 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
296 "battery reports simultaneous charging and discharging\n");
297
298 /* XXX If all batteries are critical, perhaps we should suspend. */
299 if (sc->bst.state & ACPI_BATT_STAT_CRITICAL) {
300 if ((sc->flags & ACPI_BATT_STAT_CRITICAL) == 0) {
301 sc->flags |= ACPI_BATT_STAT_CRITICAL;
302 device_printf(dev, "critically low charge!\n");
303 }
304 } else
305 sc->flags &= ~ACPI_BATT_STAT_CRITICAL;
306
307 end:
308 AcpiOsFree(bst_buffer.Pointer);
309 }
310
311 /* XXX There should be a cleaner way to do this locking. */
312 static void
acpi_cmbat_get_bix_task(void * arg)313 acpi_cmbat_get_bix_task(void *arg)
314 {
315
316 ACPI_SERIAL_BEGIN(cmbat);
317 acpi_cmbat_get_bix(arg);
318 ACPI_SERIAL_END(cmbat);
319 }
320
321 static void
acpi_cmbat_get_bix(void * arg)322 acpi_cmbat_get_bix(void *arg)
323 {
324 struct acpi_cmbat_softc *sc;
325 ACPI_STATUS as;
326 ACPI_OBJECT *res;
327 ACPI_HANDLE h;
328 ACPI_BUFFER bix_buffer;
329 device_t dev;
330 int i, n;
331 const struct {
332 enum { _BIX, _BIF } type;
333 char *name;
334 } bobjs[] = {
335 { _BIX, "_BIX"},
336 { _BIF, "_BIF"},
337 };
338
339 ACPI_SERIAL_ASSERT(cmbat);
340
341 dev = arg;
342 sc = device_get_softc(dev);
343 h = acpi_get_handle(dev);
344 bix_buffer.Pointer = NULL;
345 bix_buffer.Length = ACPI_ALLOCATE_BUFFER;
346
347 for (n = 0; n < nitems(bobjs); n++) {
348 as = AcpiEvaluateObject(h, bobjs[n].name, NULL, &bix_buffer);
349 if (!ACPI_FAILURE(as)) {
350 res = (ACPI_OBJECT *)bix_buffer.Pointer;
351 break;
352 }
353 AcpiOsFree(bix_buffer.Pointer);
354 bix_buffer.Pointer = NULL;
355 bix_buffer.Length = ACPI_ALLOCATE_BUFFER;
356 }
357 /* Both _BIF and _BIX were not found. */
358 if (n == nitems(bobjs)) {
359 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
360 "error fetching current battery info -- %s\n",
361 AcpiFormatException(as));
362 goto end;
363 }
364
365 /*
366 * ACPI _BIX and _BIF revision mismatch check:
367 *
368 * 1. _BIF has no revision field. The number of fields must be 13.
369 *
370 * 2. _BIX has a revision field. As of ACPI 6.3 it must be "0" or
371 * "1". The number of fields will be checked---20 and 21,
372 * respectively.
373 *
374 * If the revision number is grater than "1" and the number of
375 * fields is grater than 21, it will be treated as compatible with
376 * ACPI 6.0 _BIX. If not, it will be ignored.
377 */
378 i = 0;
379 switch (bobjs[n].type) {
380 case _BIX:
381 if (acpi_PkgInt16(res, i++, &sc->bix.rev) != 0) {
382 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
383 "_BIX revision error\n");
384 goto end;
385 }
386 #define ACPI_BIX_REV_MISMATCH_ERR(x, r) do { \
387 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev), \
388 "_BIX revision mismatch (%u != %u)\n", x, r); \
389 goto end; \
390 } while (0)
391
392 if (ACPI_PKG_VALID_EQ(res, 21)) { /* ACPI 6.0 _BIX */
393 /*
394 * Some models have rev.0 _BIX with 21 members.
395 * In that case, treat the first 20 members as rev.0 _BIX.
396 */
397 if (sc->bix.rev != ACPI_BIX_REV_0 &&
398 sc->bix.rev != ACPI_BIX_REV_1)
399 ACPI_BIX_REV_MISMATCH_ERR(sc->bix.rev, ACPI_BIX_REV_1);
400 } else if (ACPI_PKG_VALID_EQ(res, 20)) {/* ACPI 4.0 _BIX */
401 /*
402 * Some models claim to be rev.1, but have a _BIX with only 20
403 * members. Be lenient and treat this as a valid rev.0 _BIX.
404 */
405 if (sc->bix.rev != ACPI_BIX_REV_0) {
406 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
407 "_BIX containing too few objects for revision %u. "
408 "Treating as revision %u instead.\n",
409 sc->bix.rev, ACPI_BIX_REV_0);
410 sc->bix.rev = ACPI_BIX_REV_0;
411 }
412 } else if (ACPI_PKG_VALID(res, 22)) {
413 /* _BIX with 22 or more members. */
414 if (ACPI_BIX_REV_MIN_CHECK(sc->bix.rev, ACPI_BIX_REV_1 + 1)) {
415 /*
416 * Unknown revision number.
417 * Assume 21 members are compatible with 6.0 _BIX.
418 */
419 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
420 "Unknown _BIX revision(%u). "
421 "Assuming compatible with revision %u.\n",
422 sc->bix.rev, ACPI_BIX_REV_1);
423 } else {
424 /*
425 * Known revision number. Ignore the extra members.
426 */
427 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
428 "Extra objects found in _BIX were ignored.\n");
429 }
430 } else {
431 /* Invalid _BIX. Ignore it. */
432 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
433 "Invalid _BIX found (rev=%u, count=%u). Ignored.\n",
434 sc->bix.rev, res->Package.Count);
435 goto end;
436 }
437 break;
438 #undef ACPI_BIX_REV_MISMATCH_ERR
439 case _BIF:
440 if (ACPI_PKG_VALID_EQ(res, 13)) /* _BIF */
441 sc->bix.rev = ACPI_BIX_REV_BIF;
442 else {
443 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
444 "Invalid _BIF found (count=%u). Ignored.\n",
445 res->Package.Count);
446 goto end;
447 }
448 break;
449 }
450
451 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
452 "rev = %04x\n", sc->bix.rev);
453 #define BIX_GETU32(NAME) do { \
454 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev), \
455 #NAME " = %u\n", sc->bix.NAME); \
456 if (acpi_PkgInt32(res, i++, &sc->bix.NAME) != 0) \
457 goto end; \
458 } while (0)
459
460 BIX_GETU32(units);
461 BIX_GETU32(dcap);
462 BIX_GETU32(lfcap);
463 BIX_GETU32(btech);
464 BIX_GETU32(dvol);
465 BIX_GETU32(wcap);
466 BIX_GETU32(lcap);
467 if (ACPI_BIX_REV_MIN_CHECK(sc->bix.rev, ACPI_BIX_REV_0)) {
468 BIX_GETU32(cycles);
469 BIX_GETU32(accuracy);
470 BIX_GETU32(stmax);
471 BIX_GETU32(stmin);
472 BIX_GETU32(aimax);
473 BIX_GETU32(aimin);
474 }
475 BIX_GETU32(gra1);
476 BIX_GETU32(gra2);
477 if (acpi_PkgStr(res, i++, sc->bix.model, ACPI_CMBAT_MAXSTRLEN) != 0)
478 goto end;
479 if (acpi_PkgStr(res, i++, sc->bix.serial, ACPI_CMBAT_MAXSTRLEN) != 0)
480 goto end;
481 if (acpi_PkgStr(res, i++, sc->bix.type, ACPI_CMBAT_MAXSTRLEN) != 0)
482 goto end;
483 if (acpi_PkgStr(res, i++, sc->bix.oeminfo, ACPI_CMBAT_MAXSTRLEN) != 0)
484 goto end;
485 if (ACPI_BIX_REV_MIN_CHECK(sc->bix.rev, ACPI_BIX_REV_1))
486 BIX_GETU32(scap);
487 #undef BIX_GETU32
488 end:
489 AcpiOsFree(bix_buffer.Pointer);
490 }
491
492 static int
acpi_cmbat_bix(device_t dev,void * bix,size_t len)493 acpi_cmbat_bix(device_t dev, void *bix, size_t len)
494 {
495 struct acpi_cmbat_softc *sc;
496
497 if (len != sizeof(struct acpi_bix) &&
498 len != sizeof(struct acpi_bif))
499 return (-1);
500
501 sc = device_get_softc(dev);
502
503 /*
504 * Just copy the data. The only value that should change is the
505 * last-full capacity, so we only update when we get a notify that says
506 * the info has changed. Many systems apparently take a long time to
507 * process a _BI[FX] call so we avoid it if possible.
508 */
509 ACPI_SERIAL_BEGIN(cmbat);
510 memcpy(bix, &sc->bix, len);
511 ACPI_SERIAL_END(cmbat);
512
513 return (0);
514 }
515
516 static int
acpi_cmbat_bst(device_t dev,struct acpi_bst * bst)517 acpi_cmbat_bst(device_t dev, struct acpi_bst *bst)
518 {
519 struct acpi_cmbat_softc *sc;
520
521 sc = device_get_softc(dev);
522
523 ACPI_SERIAL_BEGIN(cmbat);
524 if (acpi_BatteryIsPresent(dev)) {
525 acpi_cmbat_get_bst(dev);
526 memcpy(bst, &sc->bst, sizeof(*bst));
527 } else
528 bst->state = ACPI_BATT_STAT_NOT_PRESENT;
529 ACPI_SERIAL_END(cmbat);
530
531 return (0);
532 }
533
534 static void
acpi_cmbat_init_battery(void * arg)535 acpi_cmbat_init_battery(void *arg)
536 {
537 struct acpi_cmbat_softc *sc;
538 int retry, valid;
539 device_t dev;
540
541 dev = (device_t)arg;
542 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
543 "battery initialization start\n");
544
545 /*
546 * Try repeatedly to get valid data from the battery. Since the
547 * embedded controller isn't always ready just after boot, we may have
548 * to wait a while.
549 */
550 for (retry = 0; retry < ACPI_CMBAT_RETRY_MAX; retry++, AcpiOsSleep(10000)) {
551 /*
552 * Batteries on DOCK can be ejected w/ DOCK during retrying.
553 *
554 * If there is a valid softc pointer the device may be in
555 * attaching, attached or detaching state. If the state is
556 * different from attached retry getting the device state
557 * until it becomes stable. This solves a race if the ACPI
558 * notification handler is called during attach, because
559 * device_is_attached() doesn't return non-zero until after
560 * the attach code has been executed.
561 */
562 ACPI_SERIAL_BEGIN(cmbat);
563 sc = device_get_softc(dev);
564 if (sc == NULL) {
565 ACPI_SERIAL_END(cmbat);
566 return;
567 }
568
569 if (!acpi_BatteryIsPresent(dev) || !device_is_attached(dev)) {
570 ACPI_SERIAL_END(cmbat);
571 continue;
572 }
573
574 /*
575 * Only query the battery if this is the first try or the specific
576 * type of info is still invalid.
577 */
578 if (retry == 0 || !acpi_battery_bst_valid(&sc->bst)) {
579 timespecclear(&sc->bst_lastupdated);
580 acpi_cmbat_get_bst(dev);
581 }
582 if (retry == 0 || !acpi_battery_bix_valid(&sc->bix))
583 acpi_cmbat_get_bix(dev);
584
585 valid = acpi_battery_bst_valid(&sc->bst) &&
586 acpi_battery_bix_valid(&sc->bix);
587 ACPI_SERIAL_END(cmbat);
588
589 if (valid)
590 break;
591 }
592
593 if (retry == ACPI_CMBAT_RETRY_MAX) {
594 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
595 "battery initialization failed, giving up\n");
596 } else {
597 ACPI_VPRINT(dev, acpi_device_get_parent_softc(dev),
598 "battery initialization done, tried %d times\n", retry + 1);
599 }
600 }
601