1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Allegro A8293 SEC driver
4 *
5 * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
6 */
7
8 #include "a8293.h"
9
10 #define A8293_FLAG_ODT 0x10
11
12 struct a8293_dev {
13 struct i2c_client *client;
14 u8 reg[2];
15 int volt_slew_nanos_per_mv;
16 };
17
18 /*
19 * When increasing voltage, do so in minimal steps over time, minimizing
20 * risk of vIN undervoltage.
21 */
22
a8293_set_voltage_slew(struct a8293_dev * dev,struct i2c_client * client,enum fe_sec_voltage fe_sec_voltage,int min_nanos_per_mv)23 static int a8293_set_voltage_slew(struct a8293_dev *dev,
24 struct i2c_client *client,
25 enum fe_sec_voltage fe_sec_voltage,
26 int min_nanos_per_mv)
27 {
28 int ret;
29 u8 reg0, reg1;
30 int new_volt_idx;
31 const int idx_to_mv[] = {
32 0, 12709, 13042, 13375, 14042, 15042, 18042, 18709, 19042
33 };
34 const u8 idx_to_reg[] = {
35 0x00, 0x20, 0x21, 0x22, 0x24, 0x27, 0x28, 0x2A, 0x2B
36 };
37 int this_volt_idx;
38 u8 status;
39 int prev_volt_idx;
40
41 dev_dbg(&client->dev, "set_voltage_slew fe_sec_voltage=%d\n",
42 fe_sec_voltage);
43
44 /* Read status register to clear any stale faults. */
45 ret = i2c_master_recv(client, &status, 1);
46 if (ret < 0)
47 goto err;
48
49 /* Determine previous voltage */
50 switch (dev->reg[0] & 0x2F) {
51 case 0x00:
52 prev_volt_idx = 0;
53 break;
54 case 0x20:
55 prev_volt_idx = 1;
56 break;
57 case 0x21:
58 prev_volt_idx = 2;
59 break;
60 case 0x22:
61 prev_volt_idx = 3;
62 break;
63 case 0x24:
64 prev_volt_idx = 4;
65 break;
66 case 0x27:
67 prev_volt_idx = 5;
68 break;
69 case 0x28:
70 prev_volt_idx = 6;
71 break;
72 case 0x2A:
73 prev_volt_idx = 7;
74 break;
75 case 0x2B:
76 prev_volt_idx = 8;
77 break;
78 default:
79 prev_volt_idx = 0;
80 }
81
82 /* Determine new voltage */
83 switch (fe_sec_voltage) {
84 case SEC_VOLTAGE_OFF:
85 new_volt_idx = 0;
86 break;
87 case SEC_VOLTAGE_13:
88 new_volt_idx = 2;
89 break;
90 case SEC_VOLTAGE_18:
91 new_volt_idx = 6;
92 break;
93 default:
94 ret = -EINVAL;
95 goto err;
96 }
97
98 /* Slew to new voltage if new voltage is greater than current voltage */
99 this_volt_idx = prev_volt_idx;
100 if (this_volt_idx < new_volt_idx) {
101 while (this_volt_idx < new_volt_idx) {
102 int delta_mv = idx_to_mv[this_volt_idx+1] - idx_to_mv[this_volt_idx];
103 int min_wait_time = delta_mv * min_nanos_per_mv;
104
105 reg0 = idx_to_reg[this_volt_idx+1];
106 reg0 |= A8293_FLAG_ODT;
107
108 ret = i2c_master_send(client, ®0, 1);
109 if (ret < 0)
110 goto err;
111 dev->reg[0] = reg0;
112 this_volt_idx++;
113 usleep_range(min_wait_time, min_wait_time * 2);
114 }
115 } else { /* Else just set the voltage */
116 reg0 = idx_to_reg[new_volt_idx];
117 reg0 |= A8293_FLAG_ODT;
118 ret = i2c_master_send(client, ®0, 1);
119 if (ret < 0)
120 goto err;
121 dev->reg[0] = reg0;
122 }
123
124 /* TMODE=0, TGATE=1 */
125 reg1 = 0x82;
126 if (reg1 != dev->reg[1]) {
127 ret = i2c_master_send(client, ®1, 1);
128 if (ret < 0)
129 goto err;
130 dev->reg[1] = reg1;
131 }
132
133 usleep_range(1500, 5000);
134
135 return 0;
136 err:
137 dev_dbg(&client->dev, "failed=%d\n", ret);
138 return ret;
139 }
140
141
a8293_set_voltage_noslew(struct dvb_frontend * fe,enum fe_sec_voltage fe_sec_voltage)142 static int a8293_set_voltage_noslew(struct dvb_frontend *fe,
143 enum fe_sec_voltage fe_sec_voltage)
144 {
145 struct a8293_dev *dev = fe->sec_priv;
146 struct i2c_client *client = dev->client;
147 int ret;
148 u8 reg0, reg1;
149
150 dev_dbg(&client->dev, "set_voltage_noslew fe_sec_voltage=%d\n",
151 fe_sec_voltage);
152
153 switch (fe_sec_voltage) {
154 case SEC_VOLTAGE_OFF:
155 /* ENB=0 */
156 reg0 = 0x10;
157 break;
158 case SEC_VOLTAGE_13:
159 /* VSEL0=1, VSEL1=0, VSEL2=0, VSEL3=0, ENB=1*/
160 reg0 = 0x31;
161 break;
162 case SEC_VOLTAGE_18:
163 /* VSEL0=0, VSEL1=0, VSEL2=0, VSEL3=1, ENB=1*/
164 reg0 = 0x38;
165 break;
166 default:
167 ret = -EINVAL;
168 goto err;
169 }
170 if (reg0 != dev->reg[0]) {
171 ret = i2c_master_send(client, ®0, 1);
172 if (ret < 0)
173 goto err;
174 dev->reg[0] = reg0;
175 }
176
177 /* TMODE=0, TGATE=1 */
178 reg1 = 0x82;
179 if (reg1 != dev->reg[1]) {
180 ret = i2c_master_send(client, ®1, 1);
181 if (ret < 0)
182 goto err;
183 dev->reg[1] = reg1;
184 }
185
186 usleep_range(1500, 50000);
187 return 0;
188 err:
189 dev_dbg(&client->dev, "failed=%d\n", ret);
190 return ret;
191 }
192
a8293_set_voltage(struct dvb_frontend * fe,enum fe_sec_voltage fe_sec_voltage)193 static int a8293_set_voltage(struct dvb_frontend *fe,
194 enum fe_sec_voltage fe_sec_voltage)
195 {
196 struct a8293_dev *dev = fe->sec_priv;
197 struct i2c_client *client = dev->client;
198 int volt_slew_nanos_per_mv = dev->volt_slew_nanos_per_mv;
199
200 dev_dbg(&client->dev, "set_voltage volt_slew_nanos_per_mv=%d\n",
201 volt_slew_nanos_per_mv);
202
203 /* Use slew version if slew rate is set to a sane value */
204 if (volt_slew_nanos_per_mv > 0 && volt_slew_nanos_per_mv < 1600)
205 a8293_set_voltage_slew(dev, client, fe_sec_voltage,
206 volt_slew_nanos_per_mv);
207 else
208 a8293_set_voltage_noslew(fe, fe_sec_voltage);
209
210 return 0;
211 }
212
a8293_probe(struct i2c_client * client)213 static int a8293_probe(struct i2c_client *client)
214 {
215 struct a8293_dev *dev;
216 struct a8293_platform_data *pdata = client->dev.platform_data;
217 struct dvb_frontend *fe = pdata->dvb_frontend;
218 int ret;
219 u8 buf[2];
220
221 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
222 if (!dev) {
223 ret = -ENOMEM;
224 goto err;
225 }
226
227 dev->client = client;
228 dev->volt_slew_nanos_per_mv = pdata->volt_slew_nanos_per_mv;
229
230 /* check if the SEC is there */
231 ret = i2c_master_recv(client, buf, 2);
232 if (ret < 0)
233 goto err_kfree;
234
235 /* override frontend ops */
236 fe->ops.set_voltage = a8293_set_voltage;
237 fe->sec_priv = dev;
238 i2c_set_clientdata(client, dev);
239
240 dev_info(&client->dev, "Allegro A8293 SEC successfully attached\n");
241 return 0;
242 err_kfree:
243 kfree(dev);
244 err:
245 dev_dbg(&client->dev, "failed=%d\n", ret);
246 return ret;
247 }
248
a8293_remove(struct i2c_client * client)249 static void a8293_remove(struct i2c_client *client)
250 {
251 struct a8293_dev *dev = i2c_get_clientdata(client);
252
253 dev_dbg(&client->dev, "\n");
254
255 kfree(dev);
256 }
257
258 static const struct i2c_device_id a8293_id_table[] = {
259 { "a8293" },
260 {}
261 };
262 MODULE_DEVICE_TABLE(i2c, a8293_id_table);
263
264 static struct i2c_driver a8293_driver = {
265 .driver = {
266 .name = "a8293",
267 .suppress_bind_attrs = true,
268 },
269 .probe = a8293_probe,
270 .remove = a8293_remove,
271 .id_table = a8293_id_table,
272 };
273
274 module_i2c_driver(a8293_driver);
275
276 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
277 MODULE_DESCRIPTION("Allegro A8293 SEC driver");
278 MODULE_LICENSE("GPL");
279