xref: /illumos-gate/usr/src/uts/common/sys/usb/hubd/hubdvar.h (revision 993e3faf6a142ae3efdd24388883264c2b56bede)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 /*
26  * Copyright 2014 Nexenta Systems, Inc.  All rights reserved.
27  * Copyright 2016 Joyent, Inc.
28  */
29 
30 #ifndef	_SYS_USB_HUBDVAR_H
31 #define	_SYS_USB_HUBDVAR_H
32 
33 
34 #ifdef	__cplusplus
35 extern "C" {
36 #endif
37 
38 #include <sys/sunndi.h>
39 #include <sys/ndi_impldefs.h>
40 #include <sys/usb/usba/usba_types.h>
41 #include <sys/callb.h>
42 
43 /*
44  * HUB USB device state management :
45  *
46  *                          CHILD PWRLVL---1>--------+
47  *                               ^                   |
48  *                               8                   |
49  *                               |                   |
50  *                               9                   |
51  *                               v                   |
52  *	PWRED_DWN---<3----4>--ONLINE---<2-----1>-DISCONNECTED
53  *          |                  |  ^                |  |
54  *          |                  |  10               |  |
55  *          |                  |  |                |  |
56  *          |                  |  RECOVER-<2-------+  |
57  *          |                  |  ^                   |
58  *          |                  5  6                   |
59  *          |                  |  |                   |
60  *          |                  v  |                   |
61  *          +----5>----------SUSPENDED----<5----7>----+
62  *
63  *	1 = Device Unplug
64  *	2 = Original Device reconnected and after hub driver restores its own
65  *	    device state.
66  *	3 = Device idles for time T & transitions to low power state
67  *	4 = Remote wakeup by device OR Application kicking off IO to device
68  *	5 = Notification to save state prior to DDI_SUSPEND
69  *	6 = Notification to restore state after DDI_RESUME with correct device
70  *          and after hub driver restores its own device state.
71  *	7 = Notification to restore state after DDI_RESUME with device
72  *	    disconnected or a wrong device
73  *	8 = Hub detect child doing remote wakeup and request the PM
74  *	    framework to bring it to full power
75  *      9 = PM framework has compeleted call power entry point of the child
76  *	    and bus ctls of hub
77  *     10 = Restoring states of its children i.e. set addrs & config.
78  *
79  */
80 
81 #define	HUBD_INITIAL_SOFT_SPACE	4
82 
83 typedef struct hub_power_struct {
84 	void		*hubp_hubd;	/* points back to hubd_t */
85 
86 	uint8_t		hubp_wakeup_enabled;	/* remote wakeup enabled? */
87 
88 	/* this is the bit mask of the power states that device has */
89 	uint8_t		hubp_pwr_states;
90 
91 	int		hubp_busy_pm;	/* device busy accounting */
92 
93 	/* wakeup and power transition capabilities of an interface */
94 	uint8_t		hubp_pm_capabilities;
95 
96 	uint8_t		hubp_current_power;	/* current power level */
97 
98 	hrtime_t	hubp_time_at_full_power;	/* timestamp 0->3 */
99 
100 	hrtime_t	hubp_min_pm_threshold;		/* in nanoseconds */
101 
102 	/* power state of all children are tracked here */
103 	uint8_t		*hubp_child_pwrstate;
104 
105 	/* pm-components properties are stored here */
106 	char		*hubp_pmcomp[5];
107 
108 	usba_cfg_pwr_descr_t	hubp_confpwr_descr; /* config pwr descr */
109 } hub_power_t;
110 
111 /* warlock directives, stable data */
112 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_hubd))
113 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_wakeup_enabled))
114 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_pwr_states))
115 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_time_at_full_power))
116 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_min_pm_threshold))
117 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_pm_capabilities))
118 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_pmcomp))
119 _NOTE(DATA_READABLE_WITHOUT_LOCK(hub_power_t::hubp_confpwr_descr))
120 
121 
122 #define	HUBD_APID_NAMELEN	32		/* max len in cfgadm display */
123 
124 /*
125  * hubd cpr data structure used for callback before kernel threads are
126  * suspended
127  */
128 typedef struct hubd_cpr {
129 	callb_cpr_t		cpr;		/* for cpr related info */
130 	struct hubd		*statep;	/* ohci soft state struct */
131 	kmutex_t		lockp;
132 } hubd_cpr_t;
133 
134 _NOTE(DATA_READABLE_WITHOUT_LOCK(hubd_cpr_t::cpr))
135 _NOTE(DATA_READABLE_WITHOUT_LOCK(hubd_cpr_t::statep))
136 
137 
138 /*
139  * soft	state information for this hubd
140  */
141 typedef struct hubd {
142 	int			h_instance;
143 	uint_t			h_init_state;
144 	uint_t			h_dev_state;
145 	int8_t			h_bus_ctls;
146 	int8_t			h_bus_pwr;
147 	hub_power_t		*h_hubpm; /* pointer to power struct */
148 	dev_info_t		*h_dip;
149 
150 	/*
151 	 * mutex to protect softstate and hw regs
152 	 */
153 	kmutex_t		h_mutex;
154 
155 	/*
156 	 * save the usba_device pointer
157 	 */
158 	usba_device_t		*h_usba_device;
159 
160 	int			h_softstate;
161 
162 	/*
163 	 * default pipe handle
164 	 */
165 	usb_pipe_handle_t	h_default_pipe;
166 
167 	/*
168 	 * pipe handle for ep1
169 	 */
170 	usb_pipe_handle_t	h_ep1_ph;
171 	usb_ep_xdescr_t		h_ep1_xdescr;
172 	usb_pipe_policy_t	h_pipe_policy;
173 	uint_t			h_intr_pipe_state;
174 
175 	/*
176 	 * hub characteristics (normalized across various USB versions) from the
177 	 * Hub class description.
178 	 */
179 	uint8_t			h_nports;	/* from bNbrPorts */
180 	uint16_t		h_hub_chars;	/* from wHubCharacteristics */
181 	uint_t			h_power_good;	/* from bPwrOn2PwrGood */
182 	uint_t			h_current;	/* from bHubContrCurrent */
183 
184 	/*
185 	 * hotplug handling
186 	 */
187 	uint_t			h_hotplug_thread;
188 
189 	/*
190 	 * h_children_dips is a  array for holding
191 	 * each child dip indexed by port
192 	 * h_usba_devices is the corresponding usba_device
193 	 */
194 	dev_info_t		**h_children_dips;
195 	size_t			h_cd_list_length;
196 	usba_device_t		**h_usba_devices;
197 
198 	/* change reported by hub, limited to 31 ports */
199 	usb_port_mask_t		h_port_change;
200 
201 	/* waiting for reset completion callback */
202 	usb_port_mask_t		h_port_reset_wait;
203 
204 	/* track transitions of child on each port */
205 	uint16_t		h_port_state[MAX_PORTS + 1];
206 
207 	/* track reset state of each port */
208 	boolean_t		h_reset_port[MAX_PORTS + 1];
209 
210 	/* track event registration of children */
211 	uint8_t			h_child_events[MAX_PORTS + 1];
212 
213 	/* track the raw port state for debugging purposes */
214 	uint16_t		h_port_raw[MAX_PORTS + 1];
215 
216 	kcondvar_t		h_cv_reset_port;
217 	kcondvar_t		h_cv_hotplug_dev;
218 	uint_t			h_intr_completion_reason;
219 	usb_log_handle_t	h_log_handle;	/* for logging msgs */
220 
221 	ndi_event_hdl_t		h_ndi_event_hdl;
222 	hubd_cpr_t		*h_cpr_cb;
223 
224 	/*
225 	 * Hotplug event statistics since hub was attached
226 	 */
227 	ulong_t			h_total_hotplug_success;
228 	ulong_t			h_total_hotplug_failure;
229 
230 	/* for minor node */
231 	char			*h_ancestry_str;
232 
233 	/* registration data */
234 	usb_client_dev_data_t	*h_dev_data;
235 
236 	/* for deathrow implementation */
237 	boolean_t		h_cleanup_enabled;
238 	boolean_t		h_cleanup_needed;
239 	boolean_t		h_cleanup_active;
240 
241 	/*
242 	 * for power budget support
243 	 * h_pwr_limit and h_pwr_left are expressed
244 	 * in 2mA units
245 	 */
246 	boolean_t		h_local_pwr_capable;
247 	boolean_t		h_local_pwr_on;
248 	uint16_t		h_pwr_limit; /* per port pwr limit */
249 	int16_t			h_pwr_left; /* limit on the whole hub */
250 
251 	/*
252 	 * conf file override to power budget property
253 	 * if 1, power budget is disabled
254 	 */
255 	boolean_t		h_ignore_pwr_budget;
256 
257 	/* for HWA to cleanup child, NULL for normal hubs */
258 	int			(*h_cleanup_child)(dev_info_t *);
259 } hubd_t;
260 
261 _NOTE(MUTEX_PROTECTS_DATA(hubd::h_mutex, hubd))
262 _NOTE(MUTEX_PROTECTS_DATA(hubd::h_mutex, hub_power_t))
263 _NOTE(DATA_READABLE_WITHOUT_LOCK(hubd::h_default_pipe
264 		hubd::h_usba_device
265 		hubd::h_dev_data
266 		hubd::h_ndi_event_hdl
267 		hubd::h_cpr_cb
268 		hubd::h_log_handle
269 		hubd::h_ep1_ph
270 		hubd::h_instance
271 		hubd::h_hubpm
272 		hubd::h_dip
273 		hubd::h_ignore_pwr_budget
274 		hubd::h_hub_descr
275 		hubd::h_cleanup_child
276 ))
277 
278 _NOTE(SCHEME_PROTECTS_DATA("stable data", usb_ep_descr))
279 
280 /*
281  * hubd hotplug thread argument data structure
282  */
283 typedef struct hubd_hotplug_arg {
284 	hubd_t		*hubd;
285 
286 	/*
287 	 * flag to indicate if a hotplug thread is started
288 	 * during hubd attach time, if true, it means the
289 	 * connected devices need to be enumerated regardless
290 	 * of the connect status change bit
291 	 */
292 	boolean_t	hotplug_during_attach;
293 } hubd_hotplug_arg_t;
294 
295 /*
296  * hubd reset thread argument data structure
297  */
298 typedef struct hubd_reset_arg {
299 	hubd_t		*hubd;
300 	/* The port needs to be reset */
301 	uint16_t	reset_port;
302 } hubd_reset_arg_t;
303 
304 _NOTE(SCHEME_PROTECTS_DATA("unshared", hubd_hotplug_arg))
305 _NOTE(SCHEME_PROTECTS_DATA("unshared", hubd_reset_arg))
306 
307 #define	HUBD_UNIT(dev)		(getminor((dev)))
308 #define	HUBD_MUTEX(hubd)	(&((hubd)->h_mutex))
309 #define	HUBD_SS_ISOPEN		0x0001
310 #define	HUBD_ACK_ALL_CHANGES	PORT_CHANGE_MASK
311 
312 /* init state */
313 #define	HUBD_LOCKS_DONE		0x0001
314 #define	HUBD_HUBDI_REGISTERED	0x0002
315 #define	HUBD_MINOR_NODE_CREATED 0x0004
316 #define	HUBD_CHILDREN_CREATED	0x0008
317 #define	HUBD_EVENTS_REGISTERED	0x0020
318 
319 /*
320  * port flags : These are essentially extensions of  Port Status Field Bits
321  * as in USB 2.0 spec Table 11-21 and #defined in hubd.h file. We make use
322  * of the unused bits (5-7,13-15) here to track states of the hub's child.
323  */
324 #define	HUBD_CHILD_ATTACHING		0x0020
325 #define	HUBD_CHILD_DETACHING		0x0040
326 #define	HUBD_CHILD_PWRLVL_CHNG		0x0080
327 #define	HUBD_CHILD_RAISE_POWER		0x2000
328 #define	HUBD_CHILD_ZAP			0x4000
329 
330 /* Tracking events registered by children */
331 #define	HUBD_CHILD_EVENT_DISCONNECT	0x01
332 #define	HUBD_CHILD_EVENT_PRESUSPEND	0x02
333 
334 /* This dev state is used exclusively by hub to change port suspend/resume */
335 #define	USB_DEV_HUB_CHILD_PWRLVL	0x80
336 #define	USB_DEV_HUB_STATE_RECOVER	0x81
337 
338 /*
339  * hubd interrupt pipe management :
340  *
341  * Following are the states of the interrupt pipe
342  *
343  * IDLE:
344  *	initial state and after closing of the interrupt pipe
345  *
346  * OPENING:
347  *	Set when the pipe is being opened
348  *
349  * ACTIVE:
350  *	Set when the pipe has been opened in hubd_open_intr_pipe. This is
351  *	typically after a hub has got enumerated and initialized.
352  *
353  * CLOSING :
354  *	Set when the pipe is closed by calling hubd_close_intr_pipe(). This is
355  *	typically called on hub disconnect via hubd_cleanup.
356  */
357 #define	HUBD_INTR_PIPE_IDLE		0
358 #define	HUBD_INTR_PIPE_OPENING		1
359 #define	HUBD_INTR_PIPE_ACTIVE		2
360 #define	HUBD_INTR_PIPE_STOPPED		3
361 #define	HUBD_INTR_PIPE_CLOSING		4
362 
363 
364 /* request structure for putting dips on deathrow list */
365 typedef struct hubd_offline_req {
366 	usba_list_entry_t	or_queue; /* DO NOT MOVE! */
367 	hubd_t			*or_hubd;
368 	usb_port_t		or_port;
369 	dev_info_t		*or_dip;
370 	uint_t			or_flag;
371 } hubd_offline_req_t;
372 
373 _NOTE(SCHEME_PROTECTS_DATA("unshared", hubd_offline_req))
374 
375 
376 /*
377  * cfgadm state values
378  */
379 #define	HUBD_CFGADM_NORMAL		0	/* normal state */
380 #define	HUBD_CFGADM_DISCONNECTED	1	/* logically disconnected */
381 #define	HUBD_CFGADM_UNCONFIGURED	2	/* port is unconfigured */
382 #define	HUBD_CFGADM_EMPTY		3	/* port is empty */
383 #define	HUBD_CFGADM_STILL_REFERENCED	4	/* ndi_devi_offline failed */
384 #define	HUBD_CFGADM_CONFIGURED		5	/* port is configured */
385 
386 /*
387  * Debug printing
388  * Masks
389  */
390 #define	DPRINT_MASK_ATTA	0x00000001
391 #define	DPRINT_MASK_CBOPS	0x00000002
392 #define	DPRINT_MASK_CALLBACK	0x00000004
393 #define	DPRINT_MASK_PORT	0x00000008
394 #define	DPRINT_MASK_HUB 	0x00000010
395 #define	DPRINT_MASK_HOTPLUG	0x00000020
396 #define	DPRINT_MASK_EVENTS	0x00000040
397 #define	DPRINT_MASK_PM		0x00000080
398 #define	DPRINT_MASK_ALL 	0xFFFFFFFF
399 
400 
401 /* status length used in getting hub status */
402 #define	GET_STATUS_LENGTH	0x04		/* length of get status req */
403 
404 /* flag for hubd_start_polling */
405 #define	HUBD_ALWAYS_START_POLLING	1
406 
407 /* enumeration timeout */
408 #define	HUBDI_ENUM_TIMEOUT	1	/* 1 second */
409 
410 /* power budget unit in mA */
411 #define	USB_PWR_UNIT_LOAD	100
412 
413 /* power values in 100mA units */
414 #define	USB_HIGH_PWR_VALUE	5
415 #define	USB_LOW_PWR_VALUE	1
416 
417 /*
418  * According to section 9.6.3 of USB 2.0 spec,
419  * bMaxPower in the device configuration descriptor
420  * is expressed in 2mA units
421  */
422 #define	USB_CFG_DESCR_PWR_UNIT	2
423 
424 /*
425  * USB 3.x devices have the notion of a 'route' which describes the series of
426  * hubs which must be passed through to reach a given device. The route string
427  * has support for a fixed number of nested hubs. Each USB 3.x hub has to be
428  * told what its depth in the route string is, effectively it's 4-bit index into
429  * the route string. The maximum number of nested hubs, in other words a hub's
430  * depth, is defined in USB 3.1 / 10.16.2.9.
431  */
432 #define	HUBD_SS_MAX_DEPTH	5
433 
434 /* variables shared with wire adapter class drivers */
435 extern uint_t hubd_errlevel;
436 extern uint_t hubd_errmask;
437 extern uint_t hubd_instance_debug;
438 
439 /* common interfaces for hub and wire adapter class devices */
440 hubd_t	*hubd_get_soft_state(dev_info_t *);
441 void	hubd_get_ancestry_str(hubd_t *);
442 int	hubd_get_all_device_config_cloud(hubd_t *, dev_info_t *,
443 	usba_device_t *);
444 int	hubd_select_device_configuration(hubd_t *, usb_port_t,
445 	dev_info_t *, usba_device_t *);
446 dev_info_t *hubd_ready_device(hubd_t *, dev_info_t *, usba_device_t *,
447 	uint_t);
448 void	hubd_schedule_cleanup(dev_info_t *);
449 
450 #ifdef	__cplusplus
451 }
452 #endif
453 
454 #endif	/* _SYS_USB_HUBDVAR_H */
455