1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart@augustsson.net) at 9 * Carlstedt Research & Technology. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 /* 35 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf 36 */ 37 38 #include "opt_evdev.h" 39 40 #include <sys/stdint.h> 41 #include <sys/stddef.h> 42 #include <sys/param.h> 43 #include <sys/queue.h> 44 #include <sys/types.h> 45 #include <sys/systm.h> 46 #include <sys/kernel.h> 47 #include <sys/bus.h> 48 #include <sys/module.h> 49 #include <sys/lock.h> 50 #include <sys/mutex.h> 51 #include <sys/condvar.h> 52 #include <sys/sysctl.h> 53 #include <sys/sx.h> 54 #include <sys/unistd.h> 55 #include <sys/callout.h> 56 #include <sys/malloc.h> 57 #include <sys/priv.h> 58 #include <sys/conf.h> 59 #include <sys/fcntl.h> 60 #include <sys/sbuf.h> 61 62 #include <dev/hid/hid.h> 63 64 #include <dev/usb/usb.h> 65 #include <dev/usb/usbdi.h> 66 #include <dev/usb/usbdi_util.h> 67 #include <dev/usb/usbhid.h> 68 #include "usbdevs.h" 69 70 #define USB_DEBUG_VAR ums_debug 71 #include <dev/usb/usb_debug.h> 72 73 #include <dev/usb/quirk/usb_quirk.h> 74 75 #ifdef EVDEV_SUPPORT 76 #include <dev/evdev/input.h> 77 #include <dev/evdev/evdev.h> 78 #endif 79 80 #include <sys/ioccom.h> 81 #include <sys/filio.h> 82 #include <sys/mouse.h> 83 84 #ifdef USB_DEBUG 85 static int ums_debug = 0; 86 87 static SYSCTL_NODE(_hw_usb, OID_AUTO, ums, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 88 "USB ums"); 89 SYSCTL_INT(_hw_usb_ums, OID_AUTO, debug, CTLFLAG_RWTUN, 90 &ums_debug, 0, "Debug level"); 91 #endif 92 93 #define MOUSE_FLAGS_MASK (HIO_CONST|HIO_RELATIVE) 94 #define MOUSE_FLAGS (HIO_RELATIVE) 95 96 #define UMS_BUF_SIZE 8 /* bytes */ 97 #define UMS_IFQ_MAXLEN 50 /* units */ 98 #define UMS_BUTTON_MAX 31 /* exclusive, must be less than 32 */ 99 #define UMS_BUT(i) ((i) < 3 ? (((i) + 2) % 3) : (i)) 100 #define UMS_INFO_MAX 2 /* maximum number of HID sets */ 101 102 enum { 103 UMS_INTR_DT, 104 UMS_N_TRANSFER, 105 }; 106 107 struct ums_info { 108 struct hid_location sc_loc_w; 109 struct hid_location sc_loc_x; 110 struct hid_location sc_loc_y; 111 struct hid_location sc_loc_z; 112 struct hid_location sc_loc_t; 113 struct hid_location sc_loc_btn[UMS_BUTTON_MAX]; 114 115 uint32_t sc_flags; 116 #define UMS_FLAG_X_AXIS 0x0001 117 #define UMS_FLAG_Y_AXIS 0x0002 118 #define UMS_FLAG_Z_AXIS 0x0004 119 #define UMS_FLAG_T_AXIS 0x0008 120 #define UMS_FLAG_SBU 0x0010 /* spurious button up events */ 121 #define UMS_FLAG_REVZ 0x0020 /* Z-axis is reversed */ 122 #define UMS_FLAG_W_AXIS 0x0040 123 #define UMS_FLAG_VBTN 0x0080 /* Buttons in vendor usage page */ 124 125 uint8_t sc_iid_w; 126 uint8_t sc_iid_x; 127 uint8_t sc_iid_y; 128 uint8_t sc_iid_z; 129 uint8_t sc_iid_t; 130 uint8_t sc_iid_btn[UMS_BUTTON_MAX]; 131 uint8_t sc_buttons; 132 }; 133 134 struct ums_softc { 135 struct usb_fifo_sc sc_fifo; 136 struct mtx sc_mtx; 137 struct usb_callout sc_callout; 138 struct ums_info sc_info[UMS_INFO_MAX]; 139 140 mousehw_t sc_hw; 141 mousemode_t sc_mode; 142 mousestatus_t sc_status; 143 144 struct usb_xfer *sc_xfer[UMS_N_TRANSFER]; 145 146 int sc_pollrate; 147 int sc_fflags; 148 #ifdef EVDEV_SUPPORT 149 int sc_evflags; 150 #define UMS_EVDEV_OPENED 1 151 #endif 152 153 uint8_t sc_buttons; 154 uint8_t sc_iid; 155 uint8_t sc_temp[64]; 156 157 #ifdef EVDEV_SUPPORT 158 struct evdev_dev *sc_evdev; 159 #endif 160 }; 161 162 static void ums_put_queue_timeout(void *__sc); 163 164 static usb_callback_t ums_intr_callback; 165 166 static device_probe_t ums_probe; 167 static device_attach_t ums_attach; 168 static device_detach_t ums_detach; 169 170 static usb_fifo_cmd_t ums_fifo_start_read; 171 static usb_fifo_cmd_t ums_fifo_stop_read; 172 static usb_fifo_open_t ums_fifo_open; 173 static usb_fifo_close_t ums_fifo_close; 174 static usb_fifo_ioctl_t ums_fifo_ioctl; 175 176 #ifdef EVDEV_SUPPORT 177 static evdev_open_t ums_ev_open; 178 static evdev_close_t ums_ev_close; 179 static void ums_evdev_push(struct ums_softc *, int32_t, int32_t, 180 int32_t, int32_t, int32_t); 181 #endif 182 183 static void ums_start_rx(struct ums_softc *); 184 static void ums_stop_rx(struct ums_softc *); 185 static void ums_put_queue(struct ums_softc *, int32_t, int32_t, 186 int32_t, int32_t, int32_t); 187 static int ums_sysctl_handler_parseinfo(SYSCTL_HANDLER_ARGS); 188 189 static struct usb_fifo_methods ums_fifo_methods = { 190 .f_open = &ums_fifo_open, 191 .f_close = &ums_fifo_close, 192 .f_ioctl = &ums_fifo_ioctl, 193 .f_start_read = &ums_fifo_start_read, 194 .f_stop_read = &ums_fifo_stop_read, 195 .basename[0] = "ums", 196 }; 197 198 #ifdef EVDEV_SUPPORT 199 static const struct evdev_methods ums_evdev_methods = { 200 .ev_open = &ums_ev_open, 201 .ev_close = &ums_ev_close, 202 }; 203 #endif 204 205 static void 206 ums_put_queue_timeout(void *__sc) 207 { 208 struct ums_softc *sc = __sc; 209 210 mtx_assert(&sc->sc_mtx, MA_OWNED); 211 212 ums_put_queue(sc, 0, 0, 0, 0, 0); 213 #ifdef EVDEV_SUPPORT 214 ums_evdev_push(sc, 0, 0, 0, 0, 0); 215 #endif 216 } 217 218 static void 219 ums_intr_callback(struct usb_xfer *xfer, usb_error_t error) 220 { 221 struct ums_softc *sc = usbd_xfer_softc(xfer); 222 struct ums_info *info = &sc->sc_info[0]; 223 struct usb_page_cache *pc; 224 uint8_t *buf = sc->sc_temp; 225 int32_t buttons = 0; 226 int32_t buttons_found = 0; 227 #ifdef EVDEV_SUPPORT 228 int32_t buttons_reported = 0; 229 #endif 230 int32_t dw = 0; 231 int32_t dx = 0; 232 int32_t dy = 0; 233 int32_t dz = 0; 234 int32_t dt = 0; 235 uint8_t i; 236 uint8_t id; 237 int len; 238 239 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 240 241 switch (USB_GET_STATE(xfer)) { 242 case USB_ST_TRANSFERRED: 243 DPRINTFN(6, "sc=%p actlen=%d\n", sc, len); 244 245 if (len > (int)sizeof(sc->sc_temp)) { 246 DPRINTFN(6, "truncating large packet to %zu bytes\n", 247 sizeof(sc->sc_temp)); 248 len = sizeof(sc->sc_temp); 249 } 250 if (len == 0) 251 goto tr_setup; 252 253 pc = usbd_xfer_get_frame(xfer, 0); 254 usbd_copy_out(pc, 0, buf, len); 255 256 DPRINTFN(6, "data = %02x %02x %02x %02x " 257 "%02x %02x %02x %02x\n", 258 (len > 0) ? buf[0] : 0, (len > 1) ? buf[1] : 0, 259 (len > 2) ? buf[2] : 0, (len > 3) ? buf[3] : 0, 260 (len > 4) ? buf[4] : 0, (len > 5) ? buf[5] : 0, 261 (len > 6) ? buf[6] : 0, (len > 7) ? buf[7] : 0); 262 263 if (sc->sc_iid) { 264 id = *buf; 265 266 len--; 267 buf++; 268 269 } else { 270 id = 0; 271 if (sc->sc_info[0].sc_flags & UMS_FLAG_SBU) { 272 if ((*buf == 0x14) || (*buf == 0x15)) { 273 goto tr_setup; 274 } 275 } 276 } 277 278 repeat: 279 if ((info->sc_flags & UMS_FLAG_W_AXIS) && 280 (id == info->sc_iid_w)) 281 dw += hid_get_data(buf, len, &info->sc_loc_w); 282 283 if ((info->sc_flags & UMS_FLAG_X_AXIS) && 284 (id == info->sc_iid_x)) 285 dx += hid_get_data(buf, len, &info->sc_loc_x); 286 287 if ((info->sc_flags & UMS_FLAG_Y_AXIS) && 288 (id == info->sc_iid_y)) 289 dy -= hid_get_data(buf, len, &info->sc_loc_y); 290 291 if ((info->sc_flags & UMS_FLAG_Z_AXIS) && 292 (id == info->sc_iid_z)) { 293 int32_t temp; 294 temp = hid_get_data(buf, len, &info->sc_loc_z); 295 if (info->sc_flags & UMS_FLAG_REVZ) 296 temp = -temp; 297 dz -= temp; 298 } 299 300 if ((info->sc_flags & UMS_FLAG_T_AXIS) && 301 (id == info->sc_iid_t)) { 302 dt += hid_get_data(buf, len, &info->sc_loc_t); 303 /* T-axis is translated into button presses */ 304 buttons_found |= (1UL << 5) | (1UL << 6); 305 } 306 307 for (i = 0; i < info->sc_buttons; i++) { 308 uint32_t mask; 309 mask = 1UL << UMS_BUT(i); 310 /* check for correct button ID */ 311 if (id != info->sc_iid_btn[i]) 312 continue; 313 /* check for button pressed */ 314 if (hid_get_data(buf, len, &info->sc_loc_btn[i])) 315 buttons |= mask; 316 /* register button mask */ 317 buttons_found |= mask; 318 } 319 320 if (++info != &sc->sc_info[UMS_INFO_MAX]) 321 goto repeat; 322 323 /* keep old button value(s) for non-detected buttons */ 324 buttons |= sc->sc_status.button & ~buttons_found; 325 326 #ifdef EVDEV_SUPPORT 327 buttons_reported = buttons; 328 #endif 329 330 if (dx || dy || dz || dt || dw || 331 (buttons != sc->sc_status.button)) { 332 DPRINTFN(6, "x:%d y:%d z:%d t:%d w:%d buttons:0x%08x\n", 333 dx, dy, dz, dt, dw, buttons); 334 335 /* translate T-axis into button presses until further */ 336 if (dt > 0) { 337 ums_put_queue(sc, 0, 0, 0, 0, buttons); 338 buttons |= 1UL << 6; 339 } else if (dt < 0) { 340 ums_put_queue(sc, 0, 0, 0, 0, buttons); 341 buttons |= 1UL << 5; 342 } 343 344 sc->sc_status.button = buttons; 345 sc->sc_status.dx += dx; 346 sc->sc_status.dy += dy; 347 sc->sc_status.dz += dz; 348 /* 349 * sc->sc_status.dt += dt; 350 * no way to export this yet 351 */ 352 353 /* 354 * The Qtronix keyboard has a built in PS/2 355 * port for a mouse. The firmware once in a 356 * while posts a spurious button up 357 * event. This event we ignore by doing a 358 * timeout for 50 msecs. If we receive 359 * dx=dy=dz=buttons=0 before we add the event 360 * to the queue. In any other case we delete 361 * the timeout event. 362 */ 363 if ((sc->sc_info[0].sc_flags & UMS_FLAG_SBU) && 364 (dx == 0) && (dy == 0) && (dz == 0) && (dt == 0) && 365 (dw == 0) && (buttons == 0)) { 366 usb_callout_reset(&sc->sc_callout, hz / 20, 367 &ums_put_queue_timeout, sc); 368 } else { 369 usb_callout_stop(&sc->sc_callout); 370 371 ums_put_queue(sc, dx, dy, dz, dt, buttons); 372 #ifdef EVDEV_SUPPORT 373 ums_evdev_push(sc, dx, dy, dz, dt, 374 buttons_reported); 375 #endif 376 } 377 } 378 case USB_ST_SETUP: 379 tr_setup: 380 /* check if we can put more data into the FIFO */ 381 if (usb_fifo_put_bytes_max(sc->sc_fifo.fp[USB_FIFO_RX]) == 0) { 382 #ifdef EVDEV_SUPPORT 383 if ((sc->sc_evflags & UMS_EVDEV_OPENED) == 0) 384 break; 385 #else 386 break; 387 #endif 388 } 389 390 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 391 usbd_transfer_submit(xfer); 392 break; 393 394 default: /* Error */ 395 if (error != USB_ERR_CANCELLED) { 396 /* try clear stall first */ 397 usbd_xfer_set_stall(xfer); 398 goto tr_setup; 399 } 400 break; 401 } 402 } 403 404 static const struct usb_config ums_config[UMS_N_TRANSFER] = { 405 [UMS_INTR_DT] = { 406 .type = UE_INTERRUPT, 407 .endpoint = UE_ADDR_ANY, 408 .direction = UE_DIR_IN, 409 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 410 .bufsize = 0, /* use wMaxPacketSize */ 411 .callback = &ums_intr_callback, 412 }, 413 }; 414 415 /* A match on these entries will load ums */ 416 static const STRUCT_USB_HOST_ID __used ums_devs[] = { 417 {USB_IFACE_CLASS(UICLASS_HID), 418 USB_IFACE_SUBCLASS(UISUBCLASS_BOOT), 419 USB_IFACE_PROTOCOL(UIPROTO_MOUSE),}, 420 }; 421 422 static int 423 ums_probe(device_t dev) 424 { 425 struct usb_attach_arg *uaa = device_get_ivars(dev); 426 void *d_ptr; 427 int error; 428 uint16_t d_len; 429 430 DPRINTFN(11, "\n"); 431 432 if (uaa->usb_mode != USB_MODE_HOST) 433 return (ENXIO); 434 435 if (uaa->info.bInterfaceClass != UICLASS_HID) 436 return (ENXIO); 437 438 if (usb_test_quirk(uaa, UQ_UMS_IGNORE)) 439 return (ENXIO); 440 441 if ((uaa->info.bInterfaceSubClass == UISUBCLASS_BOOT) && 442 (uaa->info.bInterfaceProtocol == UIPROTO_MOUSE)) 443 return (BUS_PROBE_DEFAULT); 444 445 error = usbd_req_get_hid_desc(uaa->device, NULL, 446 &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); 447 448 if (error) 449 return (ENXIO); 450 451 if (hid_is_mouse(d_ptr, d_len)) 452 error = BUS_PROBE_DEFAULT; 453 else 454 error = ENXIO; 455 456 free(d_ptr, M_TEMP); 457 return (error); 458 } 459 460 static void 461 ums_hid_parse(struct ums_softc *sc, device_t dev, const uint8_t *buf, 462 uint16_t len, uint8_t index) 463 { 464 struct ums_info *info = &sc->sc_info[index]; 465 uint32_t flags; 466 uint8_t i; 467 uint8_t j; 468 469 if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), 470 hid_input, index, &info->sc_loc_x, &flags, &info->sc_iid_x)) { 471 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 472 info->sc_flags |= UMS_FLAG_X_AXIS; 473 } 474 } 475 if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), 476 hid_input, index, &info->sc_loc_y, &flags, &info->sc_iid_y)) { 477 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 478 info->sc_flags |= UMS_FLAG_Y_AXIS; 479 } 480 } 481 /* Try the wheel first as the Z activator since it's tradition. */ 482 if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, 483 HUG_WHEEL), hid_input, index, &info->sc_loc_z, &flags, 484 &info->sc_iid_z) || 485 hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, 486 HUG_TWHEEL), hid_input, index, &info->sc_loc_z, &flags, 487 &info->sc_iid_z)) { 488 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 489 info->sc_flags |= UMS_FLAG_Z_AXIS; 490 } 491 /* 492 * We might have both a wheel and Z direction, if so put 493 * put the Z on the W coordinate. 494 */ 495 if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, 496 HUG_Z), hid_input, index, &info->sc_loc_w, &flags, 497 &info->sc_iid_w)) { 498 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 499 info->sc_flags |= UMS_FLAG_W_AXIS; 500 } 501 } 502 } else if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, 503 HUG_Z), hid_input, index, &info->sc_loc_z, &flags, 504 &info->sc_iid_z)) { 505 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 506 info->sc_flags |= UMS_FLAG_Z_AXIS; 507 } 508 } 509 /* 510 * The Microsoft Wireless Intellimouse 2.0 reports it's wheel 511 * using 0x0048, which is HUG_TWHEEL, and seems to expect you 512 * to know that the byte after the wheel is the tilt axis. 513 * There are no other HID axis descriptors other than X,Y and 514 * TWHEEL 515 */ 516 if (hid_locate(buf, len, HID_USAGE2(HUP_GENERIC_DESKTOP, 517 HUG_TWHEEL), hid_input, index, &info->sc_loc_t, 518 &flags, &info->sc_iid_t)) { 519 info->sc_loc_t.pos += 8; 520 521 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) { 522 info->sc_flags |= UMS_FLAG_T_AXIS; 523 } 524 } else if (hid_locate(buf, len, HID_USAGE2(HUP_CONSUMER, 525 HUC_AC_PAN), hid_input, index, &info->sc_loc_t, 526 &flags, &info->sc_iid_t)) { 527 if ((flags & MOUSE_FLAGS_MASK) == MOUSE_FLAGS) 528 info->sc_flags |= UMS_FLAG_T_AXIS; 529 } 530 /* figure out the number of buttons */ 531 532 for (i = 0; i < UMS_BUTTON_MAX; i++) { 533 if (!hid_locate(buf, len, HID_USAGE2(HUP_BUTTON, (i + 1)), 534 hid_input, index, &info->sc_loc_btn[i], NULL, 535 &info->sc_iid_btn[i])) { 536 break; 537 } 538 } 539 540 /* detect other buttons */ 541 if (info->sc_flags & UMS_FLAG_VBTN) { 542 for (j = 0; (i < UMS_BUTTON_MAX) && (j < 2); i++, j++) { 543 if (!hid_locate(buf, len, HID_USAGE2(HUP_MICROSOFT, 544 (j + 1)), hid_input, index, &info->sc_loc_btn[i], 545 NULL, &info->sc_iid_btn[i])) { 546 break; 547 } 548 } 549 } 550 551 info->sc_buttons = i; 552 553 if (i > sc->sc_buttons) 554 sc->sc_buttons = i; 555 556 if (info->sc_flags == 0) 557 return; 558 559 /* announce information about the mouse */ 560 device_printf(dev, "%d buttons and [%s%s%s%s%s] coordinates ID=%u\n", 561 (info->sc_buttons), 562 (info->sc_flags & UMS_FLAG_X_AXIS) ? "X" : "", 563 (info->sc_flags & UMS_FLAG_Y_AXIS) ? "Y" : "", 564 (info->sc_flags & UMS_FLAG_Z_AXIS) ? "Z" : "", 565 (info->sc_flags & UMS_FLAG_T_AXIS) ? "T" : "", 566 (info->sc_flags & UMS_FLAG_W_AXIS) ? "W" : "", 567 info->sc_iid_x); 568 } 569 570 static int 571 ums_attach(device_t dev) 572 { 573 struct usb_attach_arg *uaa = device_get_ivars(dev); 574 struct ums_softc *sc = device_get_softc(dev); 575 struct ums_info *info; 576 void *d_ptr = NULL; 577 int isize; 578 int err; 579 uint16_t d_len; 580 uint8_t i; 581 #ifdef USB_DEBUG 582 uint8_t j; 583 #endif 584 585 DPRINTFN(11, "sc=%p\n", sc); 586 587 device_set_usb_desc(dev); 588 589 mtx_init(&sc->sc_mtx, "ums lock", NULL, MTX_DEF | MTX_RECURSE); 590 591 usb_callout_init_mtx(&sc->sc_callout, &sc->sc_mtx, 0); 592 593 /* 594 * Force the report (non-boot) protocol. 595 * 596 * Mice without boot protocol support may choose not to implement 597 * Set_Protocol at all; Ignore any error. 598 */ 599 err = usbd_req_set_protocol(uaa->device, NULL, 600 uaa->info.bIfaceIndex, 1); 601 602 err = usbd_transfer_setup(uaa->device, 603 &uaa->info.bIfaceIndex, sc->sc_xfer, ums_config, 604 UMS_N_TRANSFER, sc, &sc->sc_mtx); 605 606 if (err) { 607 DPRINTF("error=%s\n", usbd_errstr(err)); 608 goto detach; 609 } 610 611 /* Get HID descriptor */ 612 err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr, 613 &d_len, M_TEMP, uaa->info.bIfaceIndex); 614 615 if (err) { 616 device_printf(dev, "error reading report description\n"); 617 goto detach; 618 } 619 620 isize = hid_report_size_max(d_ptr, d_len, hid_input, &sc->sc_iid); 621 622 if (usb_test_quirk(uaa, UQ_MS_VENDOR_BTN)) 623 for (i = 0; i < UMS_INFO_MAX; i++) 624 sc->sc_info[i].sc_flags |= UMS_FLAG_VBTN; 625 626 /* 627 * The Microsoft Wireless Notebook Optical Mouse seems to be in worse 628 * shape than the Wireless Intellimouse 2.0, as its X, Y, wheel, and 629 * all of its other button positions are all off. It also reports that 630 * it has two additional buttons and a tilt wheel. 631 */ 632 if (usb_test_quirk(uaa, UQ_MS_BAD_CLASS)) { 633 sc->sc_iid = 0; 634 635 info = &sc->sc_info[0]; 636 info->sc_flags = (UMS_FLAG_X_AXIS | 637 UMS_FLAG_Y_AXIS | 638 UMS_FLAG_Z_AXIS | 639 UMS_FLAG_SBU); 640 info->sc_buttons = 3; 641 isize = 5; 642 /* 1st byte of descriptor report contains garbage */ 643 info->sc_loc_x.pos = 16; 644 info->sc_loc_x.size = 8; 645 info->sc_loc_y.pos = 24; 646 info->sc_loc_y.size = 8; 647 info->sc_loc_z.pos = 32; 648 info->sc_loc_z.size = 8; 649 info->sc_loc_btn[0].pos = 8; 650 info->sc_loc_btn[0].size = 1; 651 info->sc_loc_btn[1].pos = 9; 652 info->sc_loc_btn[1].size = 1; 653 info->sc_loc_btn[2].pos = 10; 654 info->sc_loc_btn[2].size = 1; 655 656 /* Announce device */ 657 device_printf(dev, "3 buttons and [XYZ] " 658 "coordinates ID=0\n"); 659 660 } else { 661 /* Search the HID descriptor and announce device */ 662 for (i = 0; i < UMS_INFO_MAX; i++) { 663 ums_hid_parse(sc, dev, d_ptr, d_len, i); 664 } 665 } 666 667 if (usb_test_quirk(uaa, UQ_MS_REVZ)) { 668 info = &sc->sc_info[0]; 669 /* Some wheels need the Z axis reversed. */ 670 info->sc_flags |= UMS_FLAG_REVZ; 671 } 672 if (isize > (int)usbd_xfer_max_framelen(sc->sc_xfer[UMS_INTR_DT])) { 673 DPRINTF("WARNING: report size, %d bytes, is larger " 674 "than interrupt size, %d bytes!\n", isize, 675 usbd_xfer_max_framelen(sc->sc_xfer[UMS_INTR_DT])); 676 } 677 free(d_ptr, M_TEMP); 678 d_ptr = NULL; 679 680 #ifdef USB_DEBUG 681 for (j = 0; j < UMS_INFO_MAX; j++) { 682 info = &sc->sc_info[j]; 683 684 DPRINTF("sc=%p, index=%d\n", sc, j); 685 DPRINTF("X\t%d/%d id=%d\n", info->sc_loc_x.pos, 686 info->sc_loc_x.size, info->sc_iid_x); 687 DPRINTF("Y\t%d/%d id=%d\n", info->sc_loc_y.pos, 688 info->sc_loc_y.size, info->sc_iid_y); 689 DPRINTF("Z\t%d/%d id=%d\n", info->sc_loc_z.pos, 690 info->sc_loc_z.size, info->sc_iid_z); 691 DPRINTF("T\t%d/%d id=%d\n", info->sc_loc_t.pos, 692 info->sc_loc_t.size, info->sc_iid_t); 693 DPRINTF("W\t%d/%d id=%d\n", info->sc_loc_w.pos, 694 info->sc_loc_w.size, info->sc_iid_w); 695 696 for (i = 0; i < info->sc_buttons; i++) { 697 DPRINTF("B%d\t%d/%d id=%d\n", 698 i + 1, info->sc_loc_btn[i].pos, 699 info->sc_loc_btn[i].size, info->sc_iid_btn[i]); 700 } 701 } 702 DPRINTF("size=%d, id=%d\n", isize, sc->sc_iid); 703 #endif 704 705 err = usb_fifo_attach(uaa->device, sc, &sc->sc_mtx, 706 &ums_fifo_methods, &sc->sc_fifo, 707 device_get_unit(dev), -1, uaa->info.bIfaceIndex, 708 UID_ROOT, GID_OPERATOR, 0644); 709 if (err) 710 goto detach; 711 712 #ifdef EVDEV_SUPPORT 713 sc->sc_evdev = evdev_alloc(); 714 evdev_set_name(sc->sc_evdev, device_get_desc(dev)); 715 evdev_set_phys(sc->sc_evdev, device_get_nameunit(dev)); 716 evdev_set_id(sc->sc_evdev, BUS_USB, uaa->info.idVendor, 717 uaa->info.idProduct, 0); 718 evdev_set_serial(sc->sc_evdev, usb_get_serial(uaa->device)); 719 evdev_set_methods(sc->sc_evdev, sc, &ums_evdev_methods); 720 evdev_support_prop(sc->sc_evdev, INPUT_PROP_POINTER); 721 evdev_support_event(sc->sc_evdev, EV_SYN); 722 evdev_support_event(sc->sc_evdev, EV_REL); 723 evdev_support_event(sc->sc_evdev, EV_KEY); 724 725 info = &sc->sc_info[0]; 726 727 if (info->sc_flags & UMS_FLAG_X_AXIS) 728 evdev_support_rel(sc->sc_evdev, REL_X); 729 730 if (info->sc_flags & UMS_FLAG_Y_AXIS) 731 evdev_support_rel(sc->sc_evdev, REL_Y); 732 733 if (info->sc_flags & UMS_FLAG_Z_AXIS) 734 evdev_support_rel(sc->sc_evdev, REL_WHEEL); 735 736 if (info->sc_flags & UMS_FLAG_T_AXIS) 737 evdev_support_rel(sc->sc_evdev, REL_HWHEEL); 738 739 for (i = 0; i < info->sc_buttons; i++) 740 evdev_support_key(sc->sc_evdev, BTN_MOUSE + i); 741 742 err = evdev_register_mtx(sc->sc_evdev, &sc->sc_mtx); 743 if (err) 744 goto detach; 745 #endif 746 747 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 748 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 749 OID_AUTO, "parseinfo", 750 CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, 751 sc, 0, ums_sysctl_handler_parseinfo, "", 752 "Dump of parsed HID report descriptor"); 753 754 return (0); 755 756 detach: 757 if (d_ptr) { 758 free(d_ptr, M_TEMP); 759 } 760 ums_detach(dev); 761 return (ENOMEM); 762 } 763 764 static int 765 ums_detach(device_t self) 766 { 767 struct ums_softc *sc = device_get_softc(self); 768 769 DPRINTF("sc=%p\n", sc); 770 771 usb_fifo_detach(&sc->sc_fifo); 772 773 #ifdef EVDEV_SUPPORT 774 evdev_free(sc->sc_evdev); 775 #endif 776 777 usbd_transfer_unsetup(sc->sc_xfer, UMS_N_TRANSFER); 778 779 usb_callout_drain(&sc->sc_callout); 780 781 mtx_destroy(&sc->sc_mtx); 782 783 return (0); 784 } 785 786 static void 787 ums_reset(struct ums_softc *sc) 788 { 789 790 /* reset all USB mouse parameters */ 791 792 if (sc->sc_buttons > MOUSE_MSC_MAXBUTTON) 793 sc->sc_hw.buttons = MOUSE_MSC_MAXBUTTON; 794 else 795 sc->sc_hw.buttons = sc->sc_buttons; 796 797 sc->sc_hw.iftype = MOUSE_IF_USB; 798 sc->sc_hw.type = MOUSE_MOUSE; 799 sc->sc_hw.model = MOUSE_MODEL_GENERIC; 800 sc->sc_hw.hwid = 0; 801 802 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 803 sc->sc_mode.rate = -1; 804 sc->sc_mode.resolution = MOUSE_RES_UNKNOWN; 805 sc->sc_mode.accelfactor = 0; 806 sc->sc_mode.level = 0; 807 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 808 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 809 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 810 811 /* reset status */ 812 813 sc->sc_status.flags = 0; 814 sc->sc_status.button = 0; 815 sc->sc_status.obutton = 0; 816 sc->sc_status.dx = 0; 817 sc->sc_status.dy = 0; 818 sc->sc_status.dz = 0; 819 /* sc->sc_status.dt = 0; */ 820 } 821 822 static void 823 ums_start_rx(struct ums_softc *sc) 824 { 825 int rate; 826 827 /* Check if we should override the default polling interval */ 828 rate = sc->sc_pollrate; 829 /* Range check rate */ 830 if (rate > 1000) 831 rate = 1000; 832 /* Check for set rate */ 833 if ((rate > 0) && (sc->sc_xfer[UMS_INTR_DT] != NULL)) { 834 DPRINTF("Setting pollrate = %d\n", rate); 835 /* Stop current transfer, if any */ 836 usbd_transfer_stop(sc->sc_xfer[UMS_INTR_DT]); 837 /* Set new interval */ 838 usbd_xfer_set_interval(sc->sc_xfer[UMS_INTR_DT], 1000 / rate); 839 /* Only set pollrate once */ 840 sc->sc_pollrate = 0; 841 } 842 843 usbd_transfer_start(sc->sc_xfer[UMS_INTR_DT]); 844 } 845 846 static void 847 ums_stop_rx(struct ums_softc *sc) 848 { 849 usbd_transfer_stop(sc->sc_xfer[UMS_INTR_DT]); 850 usb_callout_stop(&sc->sc_callout); 851 } 852 853 static void 854 ums_fifo_start_read(struct usb_fifo *fifo) 855 { 856 struct ums_softc *sc = usb_fifo_softc(fifo); 857 858 ums_start_rx(sc); 859 } 860 861 static void 862 ums_fifo_stop_read(struct usb_fifo *fifo) 863 { 864 struct ums_softc *sc = usb_fifo_softc(fifo); 865 866 #ifdef EVDEV_SUPPORT 867 if ((sc->sc_evflags & UMS_EVDEV_OPENED) == 0) 868 #endif 869 ums_stop_rx(sc); 870 } 871 872 #if ((MOUSE_SYS_PACKETSIZE != 8) || \ 873 (MOUSE_MSC_PACKETSIZE != 5)) 874 #error "Software assumptions are not met. Please update code." 875 #endif 876 877 static void 878 ums_put_queue(struct ums_softc *sc, int32_t dx, int32_t dy, 879 int32_t dz, int32_t dt, int32_t buttons) 880 { 881 uint8_t buf[8]; 882 883 #ifdef EVDEV_SUPPORT 884 if (evdev_is_grabbed(sc->sc_evdev)) 885 return; 886 #endif 887 if (1) { 888 if (dx > 254) 889 dx = 254; 890 if (dx < -256) 891 dx = -256; 892 if (dy > 254) 893 dy = 254; 894 if (dy < -256) 895 dy = -256; 896 if (dz > 126) 897 dz = 126; 898 if (dz < -128) 899 dz = -128; 900 if (dt > 126) 901 dt = 126; 902 if (dt < -128) 903 dt = -128; 904 905 buf[0] = sc->sc_mode.syncmask[1]; 906 buf[0] |= (~buttons) & MOUSE_MSC_BUTTONS; 907 buf[1] = dx >> 1; 908 buf[2] = dy >> 1; 909 buf[3] = dx - (dx >> 1); 910 buf[4] = dy - (dy >> 1); 911 912 if (sc->sc_mode.level == 1) { 913 buf[5] = dz >> 1; 914 buf[6] = dz - (dz >> 1); 915 buf[7] = (((~buttons) >> 3) & MOUSE_SYS_EXTBUTTONS); 916 } 917 usb_fifo_put_data_linear(sc->sc_fifo.fp[USB_FIFO_RX], buf, 918 sc->sc_mode.packetsize, 1); 919 } else { 920 DPRINTF("Buffer full, discarded packet\n"); 921 } 922 } 923 924 #ifdef EVDEV_SUPPORT 925 static void 926 ums_evdev_push(struct ums_softc *sc, int32_t dx, int32_t dy, 927 int32_t dz, int32_t dt, int32_t buttons) 928 { 929 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) { 930 /* Push evdev event */ 931 evdev_push_rel(sc->sc_evdev, REL_X, dx); 932 evdev_push_rel(sc->sc_evdev, REL_Y, -dy); 933 evdev_push_rel(sc->sc_evdev, REL_WHEEL, -dz); 934 evdev_push_rel(sc->sc_evdev, REL_HWHEEL, dt); 935 evdev_push_mouse_btn(sc->sc_evdev, 936 (buttons & ~MOUSE_STDBUTTONS) | 937 (buttons & (1 << 2) ? MOUSE_BUTTON1DOWN : 0) | 938 (buttons & (1 << 1) ? MOUSE_BUTTON2DOWN : 0) | 939 (buttons & (1 << 0) ? MOUSE_BUTTON3DOWN : 0)); 940 evdev_sync(sc->sc_evdev); 941 } 942 } 943 #endif 944 945 static void 946 ums_reset_buf(struct ums_softc *sc) 947 { 948 /* reset read queue, must be called locked */ 949 usb_fifo_reset(sc->sc_fifo.fp[USB_FIFO_RX]); 950 } 951 952 #ifdef EVDEV_SUPPORT 953 static int 954 ums_ev_open(struct evdev_dev *evdev) 955 { 956 struct ums_softc *sc = evdev_get_softc(evdev); 957 958 mtx_assert(&sc->sc_mtx, MA_OWNED); 959 960 sc->sc_evflags |= UMS_EVDEV_OPENED; 961 962 if (sc->sc_fflags == 0) { 963 ums_reset(sc); 964 } 965 ums_start_rx(sc); 966 967 return (0); 968 } 969 970 static int 971 ums_ev_close(struct evdev_dev *evdev) 972 { 973 struct ums_softc *sc = evdev_get_softc(evdev); 974 975 mtx_assert(&sc->sc_mtx, MA_OWNED); 976 977 sc->sc_evflags &= ~UMS_EVDEV_OPENED; 978 979 if (sc->sc_fflags == 0) 980 ums_stop_rx(sc); 981 982 return (0); 983 } 984 #endif 985 986 static int 987 ums_fifo_open(struct usb_fifo *fifo, int fflags) 988 { 989 struct ums_softc *sc = usb_fifo_softc(fifo); 990 991 DPRINTFN(2, "\n"); 992 993 /* check for duplicate open, should not happen */ 994 if (sc->sc_fflags & fflags) 995 return (EBUSY); 996 997 /* check for first open */ 998 #ifdef EVDEV_SUPPORT 999 if (sc->sc_fflags == 0 && (sc->sc_evflags & UMS_EVDEV_OPENED) == 0) 1000 ums_reset(sc); 1001 #else 1002 if (sc->sc_fflags == 0) 1003 ums_reset(sc); 1004 #endif 1005 1006 if (fflags & FREAD) { 1007 /* allocate RX buffer */ 1008 if (usb_fifo_alloc_buffer(fifo, 1009 UMS_BUF_SIZE, UMS_IFQ_MAXLEN)) { 1010 return (ENOMEM); 1011 } 1012 } 1013 1014 sc->sc_fflags |= fflags & (FREAD | FWRITE); 1015 return (0); 1016 } 1017 1018 static void 1019 ums_fifo_close(struct usb_fifo *fifo, int fflags) 1020 { 1021 struct ums_softc *sc = usb_fifo_softc(fifo); 1022 1023 DPRINTFN(2, "\n"); 1024 1025 if (fflags & FREAD) 1026 usb_fifo_free_buffer(fifo); 1027 1028 sc->sc_fflags &= ~(fflags & (FREAD | FWRITE)); 1029 } 1030 1031 static int 1032 ums_fifo_ioctl(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags) 1033 { 1034 struct ums_softc *sc = usb_fifo_softc(fifo); 1035 mousemode_t mode; 1036 int error = 0; 1037 1038 DPRINTFN(2, "\n"); 1039 1040 mtx_lock(&sc->sc_mtx); 1041 1042 switch (cmd) { 1043 case MOUSE_GETHWINFO: 1044 *(mousehw_t *)addr = sc->sc_hw; 1045 break; 1046 1047 case MOUSE_GETMODE: 1048 *(mousemode_t *)addr = sc->sc_mode; 1049 break; 1050 1051 case MOUSE_SETMODE: 1052 mode = *(mousemode_t *)addr; 1053 1054 if (mode.level == -1) { 1055 /* don't change the current setting */ 1056 } else if ((mode.level < 0) || (mode.level > 1)) { 1057 error = EINVAL; 1058 break; 1059 } else { 1060 sc->sc_mode.level = mode.level; 1061 } 1062 1063 /* store polling rate */ 1064 sc->sc_pollrate = mode.rate; 1065 1066 if (sc->sc_mode.level == 0) { 1067 if (sc->sc_buttons > MOUSE_MSC_MAXBUTTON) 1068 sc->sc_hw.buttons = MOUSE_MSC_MAXBUTTON; 1069 else 1070 sc->sc_hw.buttons = sc->sc_buttons; 1071 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 1072 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 1073 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 1074 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 1075 } else if (sc->sc_mode.level == 1) { 1076 if (sc->sc_buttons > MOUSE_SYS_MAXBUTTON) 1077 sc->sc_hw.buttons = MOUSE_SYS_MAXBUTTON; 1078 else 1079 sc->sc_hw.buttons = sc->sc_buttons; 1080 sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; 1081 sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; 1082 sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; 1083 sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; 1084 } 1085 ums_reset_buf(sc); 1086 break; 1087 1088 case MOUSE_GETLEVEL: 1089 *(int *)addr = sc->sc_mode.level; 1090 break; 1091 1092 case MOUSE_SETLEVEL: 1093 if (*(int *)addr < 0 || *(int *)addr > 1) { 1094 error = EINVAL; 1095 break; 1096 } 1097 sc->sc_mode.level = *(int *)addr; 1098 1099 if (sc->sc_mode.level == 0) { 1100 if (sc->sc_buttons > MOUSE_MSC_MAXBUTTON) 1101 sc->sc_hw.buttons = MOUSE_MSC_MAXBUTTON; 1102 else 1103 sc->sc_hw.buttons = sc->sc_buttons; 1104 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 1105 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 1106 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 1107 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 1108 } else if (sc->sc_mode.level == 1) { 1109 if (sc->sc_buttons > MOUSE_SYS_MAXBUTTON) 1110 sc->sc_hw.buttons = MOUSE_SYS_MAXBUTTON; 1111 else 1112 sc->sc_hw.buttons = sc->sc_buttons; 1113 sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; 1114 sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; 1115 sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; 1116 sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; 1117 } 1118 ums_reset_buf(sc); 1119 break; 1120 1121 case MOUSE_GETSTATUS:{ 1122 mousestatus_t *status = (mousestatus_t *)addr; 1123 1124 *status = sc->sc_status; 1125 sc->sc_status.obutton = sc->sc_status.button; 1126 sc->sc_status.button = 0; 1127 sc->sc_status.dx = 0; 1128 sc->sc_status.dy = 0; 1129 sc->sc_status.dz = 0; 1130 /* sc->sc_status.dt = 0; */ 1131 1132 if (status->dx || status->dy || status->dz /* || status->dt */ ) { 1133 status->flags |= MOUSE_POSCHANGED; 1134 } 1135 if (status->button != status->obutton) { 1136 status->flags |= MOUSE_BUTTONSCHANGED; 1137 } 1138 break; 1139 } 1140 default: 1141 error = ENOTTY; 1142 break; 1143 } 1144 1145 mtx_unlock(&sc->sc_mtx); 1146 return (error); 1147 } 1148 1149 static int 1150 ums_sysctl_handler_parseinfo(SYSCTL_HANDLER_ARGS) 1151 { 1152 struct ums_softc *sc = arg1; 1153 struct ums_info *info; 1154 struct sbuf *sb; 1155 int i, j, err, had_output; 1156 1157 sb = sbuf_new_auto(); 1158 for (i = 0, had_output = 0; i < UMS_INFO_MAX; i++) { 1159 info = &sc->sc_info[i]; 1160 1161 /* Don't emit empty info */ 1162 if ((info->sc_flags & 1163 (UMS_FLAG_X_AXIS | UMS_FLAG_Y_AXIS | UMS_FLAG_Z_AXIS | 1164 UMS_FLAG_T_AXIS | UMS_FLAG_W_AXIS)) == 0 && 1165 info->sc_buttons == 0) 1166 continue; 1167 1168 if (had_output) 1169 sbuf_printf(sb, "\n"); 1170 had_output = 1; 1171 sbuf_printf(sb, "i%d:", i + 1); 1172 if (info->sc_flags & UMS_FLAG_X_AXIS) 1173 sbuf_printf(sb, " X:r%d, p%d, s%d;", 1174 (int)info->sc_iid_x, 1175 (int)info->sc_loc_x.pos, 1176 (int)info->sc_loc_x.size); 1177 if (info->sc_flags & UMS_FLAG_Y_AXIS) 1178 sbuf_printf(sb, " Y:r%d, p%d, s%d;", 1179 (int)info->sc_iid_y, 1180 (int)info->sc_loc_y.pos, 1181 (int)info->sc_loc_y.size); 1182 if (info->sc_flags & UMS_FLAG_Z_AXIS) 1183 sbuf_printf(sb, " Z:r%d, p%d, s%d;", 1184 (int)info->sc_iid_z, 1185 (int)info->sc_loc_z.pos, 1186 (int)info->sc_loc_z.size); 1187 if (info->sc_flags & UMS_FLAG_T_AXIS) 1188 sbuf_printf(sb, " T:r%d, p%d, s%d;", 1189 (int)info->sc_iid_t, 1190 (int)info->sc_loc_t.pos, 1191 (int)info->sc_loc_t.size); 1192 if (info->sc_flags & UMS_FLAG_W_AXIS) 1193 sbuf_printf(sb, " W:r%d, p%d, s%d;", 1194 (int)info->sc_iid_w, 1195 (int)info->sc_loc_w.pos, 1196 (int)info->sc_loc_w.size); 1197 1198 for (j = 0; j < info->sc_buttons; j++) { 1199 sbuf_printf(sb, " B%d:r%d, p%d, s%d;", j + 1, 1200 (int)info->sc_iid_btn[j], 1201 (int)info->sc_loc_btn[j].pos, 1202 (int)info->sc_loc_btn[j].size); 1203 } 1204 } 1205 sbuf_finish(sb); 1206 err = SYSCTL_OUT(req, sbuf_data(sb), sbuf_len(sb) + 1); 1207 sbuf_delete(sb); 1208 1209 return (err); 1210 } 1211 1212 static device_method_t ums_methods[] = { 1213 DEVMETHOD(device_probe, ums_probe), 1214 DEVMETHOD(device_attach, ums_attach), 1215 DEVMETHOD(device_detach, ums_detach), 1216 1217 DEVMETHOD_END 1218 }; 1219 1220 static driver_t ums_driver = { 1221 .name = "ums", 1222 .methods = ums_methods, 1223 .size = sizeof(struct ums_softc), 1224 }; 1225 1226 DRIVER_MODULE(ums, uhub, ums_driver, NULL, NULL); 1227 MODULE_DEPEND(ums, usb, 1, 1, 1); 1228 MODULE_DEPEND(ums, hid, 1, 1, 1); 1229 #ifdef EVDEV_SUPPORT 1230 MODULE_DEPEND(ums, evdev, 1, 1, 1); 1231 #endif 1232 MODULE_VERSION(ums, 1); 1233 USB_PNP_HOST_INFO(ums_devs); 1234