1 /******************************************************************************
2 *
3 * Module Name: exresop - AML Interpreter operand/object resolution
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2016, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "amlcode.h"
47 #include "acparser.h"
48 #include "acinterp.h"
49 #include "acnamesp.h"
50
51
52 #define _COMPONENT ACPI_EXECUTER
53 ACPI_MODULE_NAME ("exresop")
54
55 /* Local prototypes */
56
57 static ACPI_STATUS
58 AcpiExCheckObjectType (
59 ACPI_OBJECT_TYPE TypeNeeded,
60 ACPI_OBJECT_TYPE ThisType,
61 void *Object);
62
63
64 /*******************************************************************************
65 *
66 * FUNCTION: AcpiExCheckObjectType
67 *
68 * PARAMETERS: TypeNeeded Object type needed
69 * ThisType Actual object type
70 * Object Object pointer
71 *
72 * RETURN: Status
73 *
74 * DESCRIPTION: Check required type against actual type
75 *
76 ******************************************************************************/
77
78 static ACPI_STATUS
AcpiExCheckObjectType(ACPI_OBJECT_TYPE TypeNeeded,ACPI_OBJECT_TYPE ThisType,void * Object)79 AcpiExCheckObjectType (
80 ACPI_OBJECT_TYPE TypeNeeded,
81 ACPI_OBJECT_TYPE ThisType,
82 void *Object)
83 {
84 ACPI_FUNCTION_ENTRY ();
85
86
87 if (TypeNeeded == ACPI_TYPE_ANY)
88 {
89 /* All types OK, so we don't perform any typechecks */
90
91 return (AE_OK);
92 }
93
94 if (TypeNeeded == ACPI_TYPE_LOCAL_REFERENCE)
95 {
96 /*
97 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
98 * objects and thus allow them to be targets. (As per the ACPI
99 * specification, a store to a constant is a noop.)
100 */
101 if ((ThisType == ACPI_TYPE_INTEGER) &&
102 (((ACPI_OPERAND_OBJECT *) Object)->Common.Flags &
103 AOPOBJ_AML_CONSTANT))
104 {
105 return (AE_OK);
106 }
107 }
108
109 if (TypeNeeded != ThisType)
110 {
111 ACPI_ERROR ((AE_INFO,
112 "Needed type [%s], found [%s] %p",
113 AcpiUtGetTypeName (TypeNeeded),
114 AcpiUtGetTypeName (ThisType), Object));
115
116 return (AE_AML_OPERAND_TYPE);
117 }
118
119 return (AE_OK);
120 }
121
122
123 /*******************************************************************************
124 *
125 * FUNCTION: AcpiExResolveOperands
126 *
127 * PARAMETERS: Opcode - Opcode being interpreted
128 * StackPtr - Pointer to the operand stack to be
129 * resolved
130 * WalkState - Current state
131 *
132 * RETURN: Status
133 *
134 * DESCRIPTION: Convert multiple input operands to the types required by the
135 * target operator.
136 *
137 * Each 5-bit group in ArgTypes represents one required
138 * operand and indicates the required Type. The corresponding operand
139 * will be converted to the required type if possible, otherwise we
140 * abort with an exception.
141 *
142 ******************************************************************************/
143
144 ACPI_STATUS
AcpiExResolveOperands(UINT16 Opcode,ACPI_OPERAND_OBJECT ** StackPtr,ACPI_WALK_STATE * WalkState)145 AcpiExResolveOperands (
146 UINT16 Opcode,
147 ACPI_OPERAND_OBJECT **StackPtr,
148 ACPI_WALK_STATE *WalkState)
149 {
150 ACPI_OPERAND_OBJECT *ObjDesc;
151 ACPI_STATUS Status = AE_OK;
152 UINT8 ObjectType;
153 UINT32 ArgTypes;
154 const ACPI_OPCODE_INFO *OpInfo;
155 UINT32 ThisArgType;
156 ACPI_OBJECT_TYPE TypeNeeded;
157 UINT16 TargetOp = 0;
158
159
160 ACPI_FUNCTION_TRACE_U32 (ExResolveOperands, Opcode);
161
162
163 OpInfo = AcpiPsGetOpcodeInfo (Opcode);
164 if (OpInfo->Class == AML_CLASS_UNKNOWN)
165 {
166 return_ACPI_STATUS (AE_AML_BAD_OPCODE);
167 }
168
169 ArgTypes = OpInfo->RuntimeArgs;
170 if (ArgTypes == ARGI_INVALID_OPCODE)
171 {
172 ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
173 Opcode));
174
175 return_ACPI_STATUS (AE_AML_INTERNAL);
176 }
177
178 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
179 "Opcode %X [%s] RequiredOperandTypes=%8.8X\n",
180 Opcode, OpInfo->Name, ArgTypes));
181
182 /*
183 * Normal exit is with (ArgTypes == 0) at end of argument list.
184 * Function will return an exception from within the loop upon
185 * finding an entry which is not (or cannot be converted
186 * to) the required type; if stack underflows; or upon
187 * finding a NULL stack entry (which should not happen).
188 */
189 while (GET_CURRENT_ARG_TYPE (ArgTypes))
190 {
191 if (!StackPtr || !*StackPtr)
192 {
193 ACPI_ERROR ((AE_INFO, "Null stack entry at %p",
194 StackPtr));
195
196 return_ACPI_STATUS (AE_AML_INTERNAL);
197 }
198
199 /* Extract useful items */
200
201 ObjDesc = *StackPtr;
202
203 /* Decode the descriptor type */
204
205 switch (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc))
206 {
207 case ACPI_DESC_TYPE_NAMED:
208
209 /* Namespace Node */
210
211 ObjectType = ((ACPI_NAMESPACE_NODE *) ObjDesc)->Type;
212
213 /*
214 * Resolve an alias object. The construction of these objects
215 * guarantees that there is only one level of alias indirection;
216 * thus, the attached object is always the aliased namespace node
217 */
218 if (ObjectType == ACPI_TYPE_LOCAL_ALIAS)
219 {
220 ObjDesc = AcpiNsGetAttachedObject (
221 (ACPI_NAMESPACE_NODE *) ObjDesc);
222 *StackPtr = ObjDesc;
223 ObjectType = ((ACPI_NAMESPACE_NODE *) ObjDesc)->Type;
224 }
225 break;
226
227 case ACPI_DESC_TYPE_OPERAND:
228
229 /* ACPI internal object */
230
231 ObjectType = ObjDesc->Common.Type;
232
233 /* Check for bad ACPI_OBJECT_TYPE */
234
235 if (!AcpiUtValidObjectType (ObjectType))
236 {
237 ACPI_ERROR ((AE_INFO,
238 "Bad operand object type [0x%X]", ObjectType));
239
240 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
241 }
242
243 if (ObjectType == (UINT8) ACPI_TYPE_LOCAL_REFERENCE)
244 {
245 /* Validate the Reference */
246
247 switch (ObjDesc->Reference.Class)
248 {
249 case ACPI_REFCLASS_DEBUG:
250
251 TargetOp = AML_DEBUG_OP;
252
253 /*lint -fallthrough */
254
255 case ACPI_REFCLASS_ARG:
256 case ACPI_REFCLASS_LOCAL:
257 case ACPI_REFCLASS_INDEX:
258 case ACPI_REFCLASS_REFOF:
259 case ACPI_REFCLASS_TABLE: /* DdbHandle from LOAD_OP or LOAD_TABLE_OP */
260 case ACPI_REFCLASS_NAME: /* Reference to a named object */
261
262 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
263 "Operand is a Reference, Class [%s] %2.2X\n",
264 AcpiUtGetReferenceName (ObjDesc),
265 ObjDesc->Reference.Class));
266 break;
267
268 default:
269
270 ACPI_ERROR ((AE_INFO,
271 "Unknown Reference Class 0x%2.2X in %p",
272 ObjDesc->Reference.Class, ObjDesc));
273
274 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
275 }
276 }
277 break;
278
279 default:
280
281 /* Invalid descriptor */
282
283 ACPI_ERROR ((AE_INFO, "Invalid descriptor %p [%s]",
284 ObjDesc, AcpiUtGetDescriptorName (ObjDesc)));
285
286 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
287 }
288
289 /* Get one argument type, point to the next */
290
291 ThisArgType = GET_CURRENT_ARG_TYPE (ArgTypes);
292 INCREMENT_ARG_LIST (ArgTypes);
293
294 /*
295 * Handle cases where the object does not need to be
296 * resolved to a value
297 */
298 switch (ThisArgType)
299 {
300 case ARGI_REF_OR_STRING: /* Can be a String or Reference */
301
302 if ((ACPI_GET_DESCRIPTOR_TYPE (ObjDesc) ==
303 ACPI_DESC_TYPE_OPERAND) &&
304 (ObjDesc->Common.Type == ACPI_TYPE_STRING))
305 {
306 /*
307 * String found - the string references a named object and
308 * must be resolved to a node
309 */
310 goto NextOperand;
311 }
312
313 /*
314 * Else not a string - fall through to the normal Reference
315 * case below
316 */
317 /*lint -fallthrough */
318
319 case ARGI_REFERENCE: /* References: */
320 case ARGI_INTEGER_REF:
321 case ARGI_OBJECT_REF:
322 case ARGI_DEVICE_REF:
323 case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
324 case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
325 case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
326 case ARGI_STORE_TARGET:
327
328 /*
329 * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
330 * A Namespace Node is OK as-is
331 */
332 if (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc) == ACPI_DESC_TYPE_NAMED)
333 {
334 goto NextOperand;
335 }
336
337 Status = AcpiExCheckObjectType (
338 ACPI_TYPE_LOCAL_REFERENCE, ObjectType, ObjDesc);
339 if (ACPI_FAILURE (Status))
340 {
341 return_ACPI_STATUS (Status);
342 }
343 goto NextOperand;
344
345 case ARGI_DATAREFOBJ: /* Store operator only */
346 /*
347 * We don't want to resolve IndexOp reference objects during
348 * a store because this would be an implicit DeRefOf operation.
349 * Instead, we just want to store the reference object.
350 * -- All others must be resolved below.
351 */
352 if ((Opcode == AML_STORE_OP) &&
353 ((*StackPtr)->Common.Type == ACPI_TYPE_LOCAL_REFERENCE) &&
354 ((*StackPtr)->Reference.Class == ACPI_REFCLASS_INDEX))
355 {
356 goto NextOperand;
357 }
358 break;
359
360 default:
361
362 /* All cases covered above */
363
364 break;
365 }
366
367 /*
368 * Resolve this object to a value
369 */
370 Status = AcpiExResolveToValue (StackPtr, WalkState);
371 if (ACPI_FAILURE (Status))
372 {
373 return_ACPI_STATUS (Status);
374 }
375
376 /* Get the resolved object */
377
378 ObjDesc = *StackPtr;
379
380 /*
381 * Check the resulting object (value) type
382 */
383 switch (ThisArgType)
384 {
385 /*
386 * For the simple cases, only one type of resolved object
387 * is allowed
388 */
389 case ARGI_MUTEX:
390
391 /* Need an operand of type ACPI_TYPE_MUTEX */
392
393 TypeNeeded = ACPI_TYPE_MUTEX;
394 break;
395
396 case ARGI_EVENT:
397
398 /* Need an operand of type ACPI_TYPE_EVENT */
399
400 TypeNeeded = ACPI_TYPE_EVENT;
401 break;
402
403 case ARGI_PACKAGE: /* Package */
404
405 /* Need an operand of type ACPI_TYPE_PACKAGE */
406
407 TypeNeeded = ACPI_TYPE_PACKAGE;
408 break;
409
410 case ARGI_ANYTYPE:
411
412 /* Any operand type will do */
413
414 TypeNeeded = ACPI_TYPE_ANY;
415 break;
416
417 case ARGI_DDBHANDLE:
418
419 /* Need an operand of type ACPI_TYPE_DDB_HANDLE */
420
421 TypeNeeded = ACPI_TYPE_LOCAL_REFERENCE;
422 break;
423
424
425 /*
426 * The more complex cases allow multiple resolved object types
427 */
428 case ARGI_INTEGER:
429
430 /*
431 * Need an operand of type ACPI_TYPE_INTEGER,
432 * But we can implicitly convert from a STRING or BUFFER
433 * Aka - "Implicit Source Operand Conversion"
434 */
435 Status = AcpiExConvertToInteger (ObjDesc, StackPtr, 16);
436 if (ACPI_FAILURE (Status))
437 {
438 if (Status == AE_TYPE)
439 {
440 ACPI_ERROR ((AE_INFO,
441 "Needed [Integer/String/Buffer], found [%s] %p",
442 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
443
444 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
445 }
446
447 return_ACPI_STATUS (Status);
448 }
449
450 if (ObjDesc != *StackPtr)
451 {
452 AcpiUtRemoveReference (ObjDesc);
453 }
454 goto NextOperand;
455
456 case ARGI_BUFFER:
457 /*
458 * Need an operand of type ACPI_TYPE_BUFFER,
459 * But we can implicitly convert from a STRING or INTEGER
460 * Aka - "Implicit Source Operand Conversion"
461 */
462 Status = AcpiExConvertToBuffer (ObjDesc, StackPtr);
463 if (ACPI_FAILURE (Status))
464 {
465 if (Status == AE_TYPE)
466 {
467 ACPI_ERROR ((AE_INFO,
468 "Needed [Integer/String/Buffer], found [%s] %p",
469 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
470
471 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
472 }
473
474 return_ACPI_STATUS (Status);
475 }
476
477 if (ObjDesc != *StackPtr)
478 {
479 AcpiUtRemoveReference (ObjDesc);
480 }
481 goto NextOperand;
482
483 case ARGI_STRING:
484 /*
485 * Need an operand of type ACPI_TYPE_STRING,
486 * But we can implicitly convert from a BUFFER or INTEGER
487 * Aka - "Implicit Source Operand Conversion"
488 */
489 Status = AcpiExConvertToString (
490 ObjDesc, StackPtr, ACPI_IMPLICIT_CONVERT_HEX);
491 if (ACPI_FAILURE (Status))
492 {
493 if (Status == AE_TYPE)
494 {
495 ACPI_ERROR ((AE_INFO,
496 "Needed [Integer/String/Buffer], found [%s] %p",
497 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
498
499 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
500 }
501
502 return_ACPI_STATUS (Status);
503 }
504
505 if (ObjDesc != *StackPtr)
506 {
507 AcpiUtRemoveReference (ObjDesc);
508 }
509 goto NextOperand;
510
511 case ARGI_COMPUTEDATA:
512
513 /* Need an operand of type INTEGER, STRING or BUFFER */
514
515 switch (ObjDesc->Common.Type)
516 {
517 case ACPI_TYPE_INTEGER:
518 case ACPI_TYPE_STRING:
519 case ACPI_TYPE_BUFFER:
520
521 /* Valid operand */
522 break;
523
524 default:
525 ACPI_ERROR ((AE_INFO,
526 "Needed [Integer/String/Buffer], found [%s] %p",
527 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
528
529 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
530 }
531 goto NextOperand;
532
533 case ARGI_BUFFER_OR_STRING:
534
535 /* Need an operand of type STRING or BUFFER */
536
537 switch (ObjDesc->Common.Type)
538 {
539 case ACPI_TYPE_STRING:
540 case ACPI_TYPE_BUFFER:
541
542 /* Valid operand */
543 break;
544
545 case ACPI_TYPE_INTEGER:
546
547 /* Highest priority conversion is to type Buffer */
548
549 Status = AcpiExConvertToBuffer (ObjDesc, StackPtr);
550 if (ACPI_FAILURE (Status))
551 {
552 return_ACPI_STATUS (Status);
553 }
554
555 if (ObjDesc != *StackPtr)
556 {
557 AcpiUtRemoveReference (ObjDesc);
558 }
559 break;
560
561 default:
562 ACPI_ERROR ((AE_INFO,
563 "Needed [Integer/String/Buffer], found [%s] %p",
564 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
565
566 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
567 }
568 goto NextOperand;
569
570 case ARGI_DATAOBJECT:
571 /*
572 * ARGI_DATAOBJECT is only used by the SizeOf operator.
573 * Need a buffer, string, package, or RefOf reference.
574 *
575 * The only reference allowed here is a direct reference to
576 * a namespace node.
577 */
578 switch (ObjDesc->Common.Type)
579 {
580 case ACPI_TYPE_PACKAGE:
581 case ACPI_TYPE_STRING:
582 case ACPI_TYPE_BUFFER:
583 case ACPI_TYPE_LOCAL_REFERENCE:
584
585 /* Valid operand */
586 break;
587
588 default:
589
590 ACPI_ERROR ((AE_INFO,
591 "Needed [Buffer/String/Package/Reference], found [%s] %p",
592 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
593
594 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
595 }
596 goto NextOperand;
597
598 case ARGI_COMPLEXOBJ:
599
600 /* Need a buffer or package or (ACPI 2.0) String */
601
602 switch (ObjDesc->Common.Type)
603 {
604 case ACPI_TYPE_PACKAGE:
605 case ACPI_TYPE_STRING:
606 case ACPI_TYPE_BUFFER:
607
608 /* Valid operand */
609 break;
610
611 default:
612
613 ACPI_ERROR ((AE_INFO,
614 "Needed [Buffer/String/Package], found [%s] %p",
615 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
616
617 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
618 }
619 goto NextOperand;
620
621 case ARGI_REGION_OR_BUFFER: /* Used by Load() only */
622
623 /*
624 * Need an operand of type REGION or a BUFFER
625 * (which could be a resolved region field)
626 */
627 switch (ObjDesc->Common.Type)
628 {
629 case ACPI_TYPE_BUFFER:
630 case ACPI_TYPE_REGION:
631
632 /* Valid operand */
633 break;
634
635 default:
636
637 ACPI_ERROR ((AE_INFO,
638 "Needed [Region/Buffer], found [%s] %p",
639 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
640
641 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
642 }
643 goto NextOperand;
644
645 case ARGI_DATAREFOBJ:
646
647 /* Used by the Store() operator only */
648
649 switch (ObjDesc->Common.Type)
650 {
651 case ACPI_TYPE_INTEGER:
652 case ACPI_TYPE_PACKAGE:
653 case ACPI_TYPE_STRING:
654 case ACPI_TYPE_BUFFER:
655 case ACPI_TYPE_BUFFER_FIELD:
656 case ACPI_TYPE_LOCAL_REFERENCE:
657 case ACPI_TYPE_LOCAL_REGION_FIELD:
658 case ACPI_TYPE_LOCAL_BANK_FIELD:
659 case ACPI_TYPE_LOCAL_INDEX_FIELD:
660 case ACPI_TYPE_DDB_HANDLE:
661
662 /* Valid operand */
663 break;
664
665 default:
666
667 if (AcpiGbl_EnableInterpreterSlack)
668 {
669 /*
670 * Enable original behavior of Store(), allowing any
671 * and all objects as the source operand. The ACPI
672 * spec does not allow this, however.
673 */
674 break;
675 }
676
677 if (TargetOp == AML_DEBUG_OP)
678 {
679 /* Allow store of any object to the Debug object */
680
681 break;
682 }
683
684 ACPI_ERROR ((AE_INFO,
685 "Needed Integer/Buffer/String/Package/Ref/Ddb]"
686 ", found [%s] %p",
687 AcpiUtGetObjectTypeName (ObjDesc), ObjDesc));
688
689 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
690 }
691 goto NextOperand;
692
693 default:
694
695 /* Unknown type */
696
697 ACPI_ERROR ((AE_INFO,
698 "Internal - Unknown ARGI (required operand) type 0x%X",
699 ThisArgType));
700
701 return_ACPI_STATUS (AE_BAD_PARAMETER);
702 }
703
704 /*
705 * Make sure that the original object was resolved to the
706 * required object type (Simple cases only).
707 */
708 Status = AcpiExCheckObjectType (
709 TypeNeeded, (*StackPtr)->Common.Type, *StackPtr);
710 if (ACPI_FAILURE (Status))
711 {
712 return_ACPI_STATUS (Status);
713 }
714
715 NextOperand:
716 /*
717 * If more operands needed, decrement StackPtr to point
718 * to next operand on stack
719 */
720 if (GET_CURRENT_ARG_TYPE (ArgTypes))
721 {
722 StackPtr--;
723 }
724 }
725
726 ACPI_DUMP_OPERANDS (WalkState->Operands,
727 AcpiPsGetOpcodeName (Opcode), WalkState->NumOperands);
728
729 return_ACPI_STATUS (Status);
730 }
731