xref: /titanic_44/usr/src/cmd/sasinfo/printAttrs.c (revision 9e86db79b7d1bbc5f2f04e99954cbd5eae0e22bb)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23  * Use is subject to license terms.
24  */
25 
26 #include <ctype.h>
27 #include <printAttrs.h>
28 
29 static SAS_STATE hbastatus_string[] = {
30 	HBA_STATUS_OK,				"Okay",
31 	HBA_STATUS_ERROR,			"Error",
32 	HBA_STATUS_ERROR_NOT_SUPPORTED,		"Not Supported",
33 	HBA_STATUS_ERROR_INVALID_HANDLE,	"Invalid Handle",
34 	HBA_STATUS_ERROR_ARG,			"Argument Error",
35 	HBA_STATUS_ERROR_ILLEGAL_WWN,		"Illegal WWN",
36 	HBA_STATUS_ERROR_ILLEGAL_INDEX,		"Illegal Index",
37 	HBA_STATUS_ERROR_MORE_DATA,		"Not Enough Buffer for Data",
38 	HBA_STATUS_ERROR_STALE_DATA,		"Stale Data",
39 	HBA_STATUS_SCSI_CHECK_CONDITION,	"SCSI Check Condition",
40 	HBA_STATUS_ERROR_BUSY,			"Busy",
41 	HBA_STATUS_ERROR_TRY_AGAIN,		"Try Again",
42 	HBA_STATUS_ERROR_UNAVAILABLE,		"Unavailable",
43 	HBA_STATUS_ERROR_ELS_REJECT,		"ELS Reject",
44 	HBA_STATUS_ERROR_INVALID_LUN,		"Invalid LUN",
45 	HBA_STATUS_ERROR_INCOMPATIBLE,		"Request Incompatible",
46 	HBA_STATUS_ERROR_AMBIGUOUS_WWN,		"Ambiguous WWN",
47 	HBA_STATUS_ERROR_LOCAL_BUS,		"Local Bus Error",
48 	HBA_STATUS_ERROR_LOCAL_TARGET,		"Local Target Error",
49 	HBA_STATUS_ERROR_LOCAL_LUN,		"Local LUN Error",
50 	HBA_STATUS_ERROR_LOCAL_SCSIID_BOUND,	"Local SCSIID Bound",
51 	HBA_STATUS_ERROR_TARGET_FCID,		"Target FCID Error",
52 	HBA_STATUS_ERROR_TARGET_NODE_WWN,	"Target Node WWN Error",
53 	HBA_STATUS_ERROR_TARGET_PORT_WWN,	"Target Port WWN Error",
54 	HBA_STATUS_ERROR_TARGET_LUN,		"Target LUN Error",
55 	HBA_STATUS_ERROR_TARGET_LUID,		"Target LUID Error",
56 	HBA_STATUS_ERROR_NO_SUCH_BINDING,	"No Such Binding",
57 	HBA_STATUS_ERROR_NOT_A_TARGET,		"Not a Target",
58 	HBA_STATUS_ERROR_UNSUPPORTED_FC4,	"Unsupported FC4",
59 	HBA_STATUS_ERROR_INCAPABLE,		"Incapable",
60 	HBA_STATUS_ERROR_TARGET_BUSY,		"Target Busy",
61 	HBA_STATUS_ERROR_NOT_LOADED,		"Not Loaded",
62 	HBA_STATUS_ERROR_ALREADY_LOADED,	"Alreday Loaded",
63 	HBA_STATUS_ERROR_ILLEGAL_FCID,		"Illegal FCID",
64 	HBA_STATUS_ERROR_NOT_ASCSIDEVICE,	"Not a SCSI Device",
65 	HBA_STATUS_ERROR_INVALID_PROTOCOL_TYPE,	"Invalid Protocol Type",
66 	HBA_STATUS_ERROR_BAD_EVENT_TYPE,	"Bad Event Type",
67 	-1,					NULL
68 };
69 
70 SAS_STATE porttype_string[] = {
71 	HBA_PORTTYPE_UNKNOWN,		"UNKNOWN",
72 	HBA_PORTTYPE_OTHER,		"OTHER",
73 	HBA_PORTTYPE_NOTPRESENT,	"NOT Present",
74 	HBA_PORTTYPE_SASDEVICE,		"SAS Device",
75 	HBA_PORTTYPE_SATADEVICE,	"SATA Device",
76 	HBA_PORTTYPE_SASEXPANDER, 	"SAS Expander",
77 	-1,				NULL,
78 };
79 
80 SAS_STATE portstate_string[] = {
81 	HBA_PORTSTATE_UNKNOWN,		"unknown",
82 	HBA_PORTSTATE_ONLINE,		"online",
83 	HBA_PORTSTATE_OFFLINE,		"offline",
84 	HBA_PORTSTATE_BYPASSED,		"bypassed",
85 	HBA_PORTSTATE_DIAGNOSTICS,	"diagnostics",
86 	HBA_PORTSTATE_LINKDOWN,		"link Down",
87 	HBA_PORTSTATE_ERROR,		"port Error",
88 	HBA_PORTSTATE_LOOPBACK,		"loopback",
89 	HBA_PORTSTATE_DEGRADED,		"degraded",
90 	-1,				NULL,
91 };
92 
93 static SAS_STATE phystate_string[] = {
94 	HBA_SASSTATE_UNKNOWN,		"unknown",
95 	HBA_SASSTATE_DISABLED,		"disabled",
96 	HBA_SASSTATE_FAILED,		"failed",
97 	HBA_SASSTATE_SATASPINUP,	"sata-spinup",
98 	HBA_SASSTATE_SATAPORTSEL,	"sata-portselector",
99 	HBA_SASSPEED_1_5GBIT,		"1.5Gbit",
100 	HBA_SASSPEED_3GBIT,		"3Gbit",
101 	HBA_SASSPEED_6GBIT,		"6Gbit",
102 	-1,				NULL,
103 };
104 
105 static SAS_STATE dtype_string[] = {
106 	DTYPE_DIRECT,			"Disk Device",
107 	DTYPE_SEQUENTIAL,		"Tape Device",
108 	DTYPE_PRINTER,			"Printer Device",
109 	DTYPE_PROCESSOR,		"Processor Device",
110 	DTYPE_WORM,			"WORM Device",
111 	DTYPE_RODIRECT,			"CD/DVD Device",
112 	DTYPE_SCANNER,			"Scanner Device",
113 	DTYPE_OPTICAL,			"Optical Memory Device",
114 	DTYPE_CHANGER,			"Medium Changer Device",
115 	DTYPE_COMM,			"Communications Device",
116 	DTYPE_ARRAY_CTRL,		"Storage Array Controller Device",
117 	DTYPE_ESI,			"Enclosure Services Device",
118 	DTYPE_RBC,			"Simplified Direct-access Device",
119 	DTYPE_OCRW,			"Optical Card Reader/Writer Device",
120 	DTYPE_BCC,			"Bridge Controller Commands",
121 	DTYPE_OSD,			"Object-based Storage Device",
122 	DTYPE_ADC,			"Automation/Drive Interface",
123 	DTYPE_WELLKNOWN,		"Well Known Logical Unit",
124 	DTYPE_UNKNOWN,			"Unknown Device",
125 	-1,				NULL
126 };
127 
128 static char *getPhyStateString(HBA_UINT32 key, phystat_type phyt);
129 
130 char *
getIndentSpaces(int number)131 getIndentSpaces(int number)
132 {
133 	int 		i = 0;
134 	/* the maximum indent with terminator '\0' */
135 	static char	ret[MAXINDENT+1];
136 
137 	if (number > MAXINDENT)
138 		number = MAXINDENT;
139 
140 	for (i = 0; i < number; i++) {
141 		ret[i] = ' ';
142 	}
143 	ret[i] = '\0';
144 	return (ret);
145 }
146 
147 char *
getStateString(HBA_UINT32 key,SAS_STATE * stat_string)148 getStateString(HBA_UINT32 key, SAS_STATE *stat_string)
149 {
150 	static char ret[64];
151 	while (stat_string->key != -1) {
152 		if (stat_string->key == key) {
153 			return ((char *)stat_string->value);
154 		}
155 		stat_string++;
156 	}
157 	(void *) sprintf(ret, "Undefined value (%d)", key);
158 	return (ret);
159 }
160 
161 static char *
getPhyStateString(HBA_UINT32 key,phystat_type phyt)162 getPhyStateString(HBA_UINT32 key, phystat_type phyt)
163 {
164 	int i = 0, len = 0, match = 0;
165 	HBA_UINT32 physpeed[] = {
166 		HBA_SASSPEED_1_5GBIT,
167 		HBA_SASSPEED_3GBIT,
168 		HBA_SASSPEED_6GBIT
169 	};
170 
171 	len = sizeof (physpeed) / sizeof (HBA_UINT32);
172 	for (i = 0; i < len; i++) {
173 		if (key == physpeed[i]) {
174 			match = 1;
175 			break;
176 		}
177 	}
178 
179 	if (match == 1) {
180 		if (phyt == PHY_STATE)
181 			return ("enabled");
182 		else
183 			return (getStateString(key, phystate_string));
184 	} else {
185 		if (phyt == PHY_STATE)
186 			return (getStateString(key, phystate_string));
187 		else
188 			return ("not available");
189 	}
190 }
191 
192 char *
getHBAStatus(HBA_STATUS key)193 getHBAStatus(HBA_STATUS key)
194 {
195 	return (getStateString(key, hbastatus_string));
196 }
197 
198 /*
199  * return device type description
200  *
201  * Arguments:
202  *	dType - Device type returned from Standard INQUIRY
203  * Returns:
204  *	char string description for device type
205  */
206 char *
getDTypeString(uchar_t dType)207 getDTypeString(uchar_t dType)
208 {
209 	return (getStateString((dType & DTYPE_MASK), dtype_string));
210 }
211 
212 uint64_t
wwnConversion(uchar_t * wwn)213 wwnConversion(uchar_t *wwn)
214 {
215 	uint64_t tmp;
216 	(void *) memcpy(&tmp, wwn, sizeof (uint64_t));
217 	return (ntohll(tmp));
218 }
219 
220 /*
221  * prints out HBA information
222  */
223 void
printHBAInfo(SMHBA_ADAPTERATTRIBUTES * attrs,int pflag,int numberOfPorts,const char * adapterName)224 printHBAInfo(SMHBA_ADAPTERATTRIBUTES *attrs, int pflag, int numberOfPorts,
225     const char *adapterName)
226 {
227 
228 	(void *) fprintf(stdout, "%s %s\n", "HBA Name:", adapterName);
229 
230 	if (pflag & PRINT_VERBOSE) {
231 		(void *) fprintf(stdout, "%s%s %s\n",
232 		    getIndentSpaces(4), "Manufacturer:",
233 		    attrs->Manufacturer[0] == 0?
234 		    "not available":attrs->Manufacturer);
235 		(void *) fprintf(stdout, "%s%s %s\n",
236 		    getIndentSpaces(4), "Model: ",
237 		    attrs->Model[0] == 0? "not available":attrs->Model);
238 		(void *) fprintf(stdout, "%s%s %s\n",
239 		    getIndentSpaces(4),
240 		    "Firmware Version:",
241 		    attrs->FirmwareVersion[0] == 0? "not available":
242 		    attrs->FirmwareVersion);
243 		(void *) fprintf(stdout, "%s%s %s\n",
244 		    getIndentSpaces(4),
245 		    "FCode/BIOS Version:",
246 		    attrs->OptionROMVersion[0] == 0? "not available":
247 		    attrs->OptionROMVersion);
248 		(void *) fprintf(stdout, "%s%s %s\n",
249 		    getIndentSpaces(4),
250 		    "Serial Number:",
251 		    attrs->SerialNumber[0] == 0? "not available":
252 		    attrs->SerialNumber);
253 		(void *) fprintf(stdout, "%s%s %s\n",
254 		    getIndentSpaces(4),
255 		    "Driver Name:",
256 		    attrs->DriverName[0] == 0? "not available":
257 		    attrs->DriverName);
258 		(void *) fprintf(stdout, "%s%s %s\n",
259 		    getIndentSpaces(4),
260 		    "Driver Version:",
261 		    attrs->DriverVersion[0] == 0? "not available":
262 		    attrs->DriverVersion);
263 		(void *) fprintf(stdout, "%s%s %d\n",
264 		    getIndentSpaces(4),
265 		    "Number of HBA Ports:",
266 		    numberOfPorts);
267 	}
268 }
269 
270 /*
271  * prints out all the HBA port information
272  */
273 void
printHBAPortInfo(SMHBA_PORTATTRIBUTES * port,SMHBA_ADAPTERATTRIBUTES * attrs,int pflag)274 printHBAPortInfo(SMHBA_PORTATTRIBUTES *port,
275     SMHBA_ADAPTERATTRIBUTES *attrs, int pflag) {
276 
277 	if ((port == NULL) || (attrs == NULL)) {
278 		return;
279 	}
280 
281 	(void *) fprintf(stdout, "%s%s %s\n",
282 	    getIndentSpaces(2),
283 	    "HBA Port Name:",
284 	    port->OSDeviceName);
285 
286 	if (!(pflag & PRINT_VERBOSE)) {
287 		return;
288 	}
289 
290 	if (port->PortType != HBA_PORTTYPE_SASDEVICE)
291 		return;
292 
293 	(void *) fprintf(stdout, "%s%s %s\n",
294 	    getIndentSpaces(4),
295 	    "Type:",
296 	    getStateString(port->PortType, porttype_string));
297 	(void *) fprintf(stdout, "%s%s %s\n",
298 	    getIndentSpaces(4),
299 	    "State:",
300 	    getStateString(port->PortState, portstate_string));
301 
302 	(void *) fprintf(stdout, "%s%s %016llx\n",
303 	    getIndentSpaces(4),
304 	    "Local SAS Address:",
305 	    wwnConversion(port->PortSpecificAttribute.SASPort->\
306 	    LocalSASAddress.wwn));
307 
308 	(void *) fprintf(stdout, "%s%s %016llx\n",
309 	    getIndentSpaces(4),
310 	    "Attached SAS Address:",
311 	    wwnConversion(port->PortSpecificAttribute.SASPort->\
312 	    AttachedSASAddress.wwn));
313 
314 	(void *) fprintf(stdout, "%s%s %d\n",
315 	    getIndentSpaces(4),
316 	    "Number of Phys:",
317 	    port->PortSpecificAttribute.SASPort->NumberofPhys);
318 }
319 
320 void
printHBAPortPhyInfo(SMHBA_SAS_PHY * phyinfo)321 printHBAPortPhyInfo(SMHBA_SAS_PHY *phyinfo)
322 {
323 	if (phyinfo == NULL)
324 		return;
325 
326 	(void *) fprintf(stdout, "%s%s %u\n",
327 	    getIndentSpaces(6),
328 	    "Identifier:",
329 	    phyinfo->PhyIdentifier);
330 
331 	(void *) fprintf(stdout, "%s%s %s\n",
332 	    getIndentSpaces(8),
333 	    "State: ",
334 	    getPhyStateString(phyinfo->NegotiatedLinkRate, PHY_STATE));
335 	(void *) fprintf(stdout, "%s%s %s/%s\n",
336 	    getIndentSpaces(8),
337 	    "HardwareLinkRate(Min/Max):",
338 	    getPhyStateString(phyinfo->HardwareMinLinkRate, PHY_SPEED),
339 	    getPhyStateString(phyinfo->HardwareMaxLinkRate, PHY_SPEED));
340 	(void *) fprintf(stdout, "%s%s %s/%s\n",
341 	    getIndentSpaces(8),
342 	    "ProgrammedLinkRate(Min/Max):",
343 	    getPhyStateString(phyinfo->ProgrammedMinLinkRate, PHY_SPEED),
344 	    getPhyStateString(phyinfo->ProgrammedMaxLinkRate, PHY_SPEED));
345 	(void *) fprintf(stdout, "%s%s %s\n",
346 	    getIndentSpaces(8),
347 	    "NegotiatedLinkRate:",
348 	    getPhyStateString(phyinfo->NegotiatedLinkRate, PHY_SPEED));
349 }
350 
351 void
printHBAPortPhyStatistics(SMHBA_SASPHYSTATISTICS * phystat)352 printHBAPortPhyStatistics(SMHBA_SASPHYSTATISTICS *phystat)
353 {
354 	if (phystat == NULL)
355 		return;
356 
357 	(void *) fprintf(stdout, "%s%s\n",
358 	    getIndentSpaces(8),
359 	    "Link Error Statistics:");
360 	(void *) fprintf(stdout, "%s%s %llu\n",
361 	    getIndentSpaces(12),
362 	    "Invalid Dword:",
363 	    phystat->InvalidDwordCount);
364 	(void *) fprintf(stdout, "%s%s %llu\n",
365 	    getIndentSpaces(12),
366 	    "Running Disparity Error:",
367 	    phystat->RunningDisparityErrorCount);
368 	(void *) fprintf(stdout, "%s%s %llu\n",
369 	    getIndentSpaces(12),
370 	    "Loss of Dword Sync:",
371 	    phystat->LossofDwordSyncCount);
372 	(void *) fprintf(stdout, "%s%s %llu\n",
373 	    getIndentSpaces(12),
374 	    "Reset Problem:",
375 	    phystat->PhyResetProblemCount);
376 }
377 
378 /*
379  * print the OS device name for the logical-unit object
380  *
381  * Arguments:
382  *	devListWalk - OS device path info
383  *	verbose - boolean indicating whether to display additional info
384  *
385  * returns:
386  * 	0 - we're good.
387  * 	>0 - we met issues.
388  */
389 int
printTargetPortInfo(targetPortList_t * TPListWalk,int pflag)390 printTargetPortInfo(targetPortList_t *TPListWalk, int pflag)
391 {
392 	targetPortConfig_t	*configList;
393 	targetPortMappingData_t	*mapList;
394 	int			count, i;
395 	int			ret = 0;
396 
397 	(void *) fprintf(stdout, "Target Port SAS Address: %016llx\n",
398 	    wwnConversion(TPListWalk->sasattr.LocalSASAddress.wwn));
399 	if ((pflag & PRINT_VERBOSE) || (pflag & PRINT_TARGET_SCSI)) {
400 		(void *) fprintf(stdout, "%sType: %s\n", getIndentSpaces(4),
401 		    getStateString(TPListWalk->targetattr.PortType,
402 		    porttype_string));
403 		for (configList = TPListWalk->configEntry;
404 		    configList != NULL; configList = configList->next) {
405 			(void *) fprintf(stdout, "%sHBA Port Name: %s\n",
406 			    getIndentSpaces(4), configList->hbaPortName);
407 			if (wwnConversion(configList->expanderSASAddr.wwn) !=
408 			    0) {
409 				if (configList->expanderValid) {
410 					(void *) fprintf(stdout,
411 					    "%sExpander Device SAS Address:"
412 					    " %016llx",
413 					    getIndentSpaces(8),
414 					    wwnConversion(configList->
415 					    expanderSASAddr.wwn));
416 				} else {
417 					(void *) fprintf(stdout,
418 					    "%sExpander Device SAS Address:"
419 					    " %016llx (Failed to Validate"
420 					    " Attached Port.)",
421 					    getIndentSpaces(8),
422 					    wwnConversion(configList->
423 					    expanderSASAddr.wwn));
424 					ret++;
425 				}
426 			} else {
427 				if (configList->expanderValid) {
428 					(void *) fprintf(stdout,
429 					    "%sExpander Device SAS Address: %s",
430 					    getIndentSpaces(8),
431 					    "None (direct attached)");
432 				} else {
433 					(void *) fprintf(stdout,
434 					    "%sExpander Device SAS Address: %s",
435 					    getIndentSpaces(8),
436 					    "None (Failed to Get"
437 					    " Attached Port)");
438 				}
439 			}
440 			(void *) fprintf(stdout, "\n");
441 			if (pflag & PRINT_TARGET_SCSI) {
442 
443 				if (configList->reportLUNsFailed) {
444 					(void *) fprintf(stdout,
445 					    "%s %016llx\n",
446 					    gettext("Error: Failed to get "
447 					    "ReportLun Data on"),
448 					    wwnConversion(TPListWalk->
449 					    sasattr.LocalSASAddress.wwn));
450 					ret++;
451 					continue;
452 				}
453 
454 				for (mapList = configList->map;
455 				    mapList != NULL; mapList = mapList->next) {
456 					(void *) fprintf(stdout, "%sLUN : %d\n",
457 					    getIndentSpaces(12),
458 					    mapList->osLUN);
459 					if (mapList->mappingExist) {
460 						(void *) fprintf(stdout,
461 						    "%sOS Device Name : %s\n",
462 						    getIndentSpaces(14),
463 						    (mapList->osDeviceName[0] ==
464 						    '\0') ?  "Not avaialble" :
465 						    mapList->osDeviceName);
466 					} else {
467 						(void *) fprintf(stdout,
468 						    "%sOS Device Name : %s\n",
469 						    getIndentSpaces(14), "No "
470 						    "matching OS Device "
471 						    "found.");
472 						ret++;
473 					}
474 		/* indentation changed here */
475 		if (mapList->inquiryFailed) {
476 			(void *) fprintf(stdout, "%s %s LUN %d\n",
477 			    gettext("Error: Failed to get Inquiry Data on"),
478 			    mapList->osDeviceName, mapList->osLUN);
479 			ret++;
480 		} else {
481 			(void *) fprintf(stdout, "%sVendor: ",
482 			    getIndentSpaces(14));
483 			for (count = sizeof (mapList->inq_vid), i = 0;
484 			    i < count; i++) {
485 				if (isprint(mapList->inq_vid[i]))
486 					(void *) fprintf(stdout, "%c",
487 					    mapList->inq_vid[i]);
488 			}
489 
490 			(void *) fprintf(stdout, "\n%sProduct: ",
491 			    getIndentSpaces(14));
492 			for (count = sizeof (mapList->inq_pid), i = 0;
493 			    i < count; i++) {
494 				if (isprint(mapList->inq_pid[i]))
495 					(void *) fprintf(stdout, "%c",
496 					    mapList->inq_pid[i]);
497 			}
498 
499 			(void *) fprintf(stdout, "\n%sDevice Type: %s\n",
500 			    getIndentSpaces(14),
501 			    getDTypeString(mapList->inq_dtype));
502 		}
503 		/* indentation changed back */
504 				}
505 			}
506 		}
507 	}
508 	return (ret);
509 }
510 
511 /*
512  * print the OS device name for the logical-unit object
513  *
514  * Arguments:
515  *	devListWalk - OS device path info
516  *	verbose - boolean indicating whether to display additional info
517  *
518  * returns:
519  * 	0 - we're good.
520  * 	>0 - we met issues.
521  */
522 int
printOSDeviceNameInfo(discoveredDevice * devListWalk,boolean_t verbose)523 printOSDeviceNameInfo(discoveredDevice *devListWalk, boolean_t verbose)
524 {
525 	portList		*portElem;
526 	tgtPortWWNList		*tgtWWNList;
527 	int			i, count;
528 	int			ret = 0;
529 
530 	(void *) fprintf(stdout, "OS Device Name: %s\n",
531 	    devListWalk->OSDeviceName);
532 	if (verbose == B_TRUE) {
533 		for (portElem = devListWalk->HBAPortList;
534 		    portElem != NULL; portElem = portElem->next) {
535 			(void *) fprintf(stdout, "%sHBA Port Name: ",
536 			    getIndentSpaces(4));
537 			(void *) fprintf(stdout, "%s", portElem->portName);
538 			for (tgtWWNList = portElem->tgtPortWWN;
539 			    tgtWWNList != NULL; tgtWWNList = tgtWWNList->next) {
540 				(void *) fprintf(stdout,
541 				    "\n%sTarget Port SAS Address: ",
542 				    getIndentSpaces(8));
543 				(void *) fprintf(stdout, "%016llx",
544 				    wwnConversion(tgtWWNList->portWWN.wwn));
545 				(void *) fprintf(stdout, "\n%sLUN: %u",
546 				    getIndentSpaces(12),
547 				    tgtWWNList->scsiOSLun);
548 			}
549 			(void *) fprintf(stdout, "\n");
550 		}
551 
552 		if (devListWalk->inquiryFailed) {
553 			(void *) fprintf(stdout, "%s %s\n",
554 			    gettext("Error: Failed to get Inquiry data "
555 			    "on device"), devListWalk->OSDeviceName);
556 			ret++;
557 		} else {
558 			(void *) fprintf(stdout, "%sVendor: ",
559 			    getIndentSpaces(4));
560 			for (count = sizeof (devListWalk->VID), i = 0;
561 			    i < count; i++) {
562 				if (isprint(devListWalk->VID[i]))
563 					(void *) fprintf(stdout, "%c",
564 					    devListWalk->VID[i]);
565 			}
566 
567 			(void *) fprintf(stdout, "\n%sProduct: ",
568 			    getIndentSpaces(4));
569 			for (count = sizeof (devListWalk->PID), i = 0;
570 			    i < count; i++) {
571 				if (isprint(devListWalk->PID[i]))
572 					(void *) fprintf(stdout, "%c",
573 					    devListWalk->PID[i]);
574 			}
575 
576 			(void *) fprintf(stdout, "\n%sDevice Type: %s\n",
577 			    getIndentSpaces(4),
578 			    getDTypeString(devListWalk->dType));
579 		}
580 	}
581 	return (ret);
582 }
583