xref: /titanic_41/usr/src/uts/sun4u/sunfire/sys/sysctrl.h (revision 29949e866e40b95795203f3ee46f44a197c946e4)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef	_SYS_SYSCTRL_H
28 #define	_SYS_SYSCTRL_H
29 
30 #pragma ident	"%Z%%M%	%I%	%E% SMI"
31 
32 #ifdef	__cplusplus
33 extern "C" {
34 #endif
35 
36 #ifndef	TRUE
37 #define	TRUE (1)
38 #endif
39 #ifndef	FALSE
40 #define	FALSE (0)
41 #endif
42 
43 /*
44  * Debugging macros
45  *
46  * The DPRINTF macro can be used by setting the sysc_debug_print_level to the
47  * appropriate debugging level.  The debug levels are defined in each source
48  * file where this header file is included.  The scoping of sysc_debug_info,
49  * and sysc_debug_print_level is to the file which included the header file.
50  * If multiple levels need to be output, the values can be 'ored'
51  * together into sysc_debug_print_level.  If sysc_debug_print_line's bit 1 is
52  * set, the line number of the debugging statement is printed out. If it has
53  * bit 2 set, the macro will drop into either the debugger or the OBP PROM.
54  */
55 
56 #ifdef  DEBUG
57 
58 #define	SYSCTRL_ATTACH_DEBUG	0x1
59 #define	SYSCTRL_INTERRUPT_DEBUG	0x2
60 #define	SYSCTRL_REGISTERS_DEBUG	0x4
61 #define	SYSC_DEBUG		SYSCTRL_ATTACH_DEBUG
62 
63 #include <sys/promif.h>
64 extern void debug_enter(char *);
65 
66 extern int sysc_debug_info;
67 extern int sysc_debug_print_level;
68 
69 #define	PRINT_LINE_NUMBER	0x1
70 #define	ENTER_MON		0x2
71 
72 #define	_PRINTF prom_printf	/* For logging to the console */
73 
74 #define	DPRINTF(print_flag, args)			\
75 	if (sysc_debug_print_level & (print_flag) && sysc_debug_info & \
76 	    PRINT_LINE_NUMBER) \
77 		_PRINTF("%s line %d:\n", __FILE__, __LINE__);	\
78 	if (sysc_debug_print_level & (print_flag)) {	\
79 		_PRINTF args;				\
80 	if (sysc_debug_info & ENTER_MON)			\
81 		debug_enter("");				\
82 	}
83 
84 #else
85 #define	DPRINTF(print_flag, args)
86 #endif /* DEBUG */
87 
88 /*
89  * OBP supplies us with 3 register sets for the clock-board node. The code for
90  * the syctrl driver relies on these register sets being presented by the
91  * PROM in the order specified below. If this changes, the following comments
92  * must be revised and the code in sysctrl_attach() must be changed to reflect
93  * these revisions.
94  *
95  * They are:
96  * 	0	Clock frequency registers
97  *	1	Misc registers
98  *	2       Clock version register
99  */
100 
101 /*
102  * The offsets are defined as offsets in bytes from the base of the OBP
103  * register to which the register belongs to.
104  */
105 
106 /* Register set 0 */
107 #define	SYS_OFF_CLK_FREQ2	0x2	/* offset of clock register 2 */
108 
109 /* Important bits for Clock Frequency register 2 */
110 #define	RCONS_UART_EN	0x80	/* Remote console reset enabled */
111 #define	GEN_RESET_EN	0x40	/* Enable reset on freq change */
112 #define	TOD_RESET_EN	0x20	/* Enable reset from TOD watchdog */
113 #define	CLOCK_FREQ_8	0x01	/* Frequency bit 8 */
114 #define	CLOCK_DIV_0	0x02	/* Cpu module divisor bit 0 */
115 #define	CLOCK_RANGE	0x0c	/* Bits 3:2 control the clock range */
116 #define	CLOCK_DIV_1	0x10	/* Cpu module divisor bit 1 */
117 
118 /* Register set 1 */
119 #define	SYS_OFF_CTRL	0x0	/* Offset of System Control register */
120 #define	SYS_OFF_STAT1	0x10	/* Offset of System Status1 register */
121 #define	SYS_OFF_STAT2	0x20	/* Offset of System Status2 register */
122 #define	SYS_OFF_PSSTAT	0x30	/* Offset of Power Supply Status */
123 #define	SYS_OFF_PSPRES	0x40	/* Offset of Power Supply Presence */
124 #define	SYS_OFF_TEMP	0x50	/* Offset of temperature register */
125 #define	SYS_OFF_DIAG	0x60	/* Offset of interrupt diag register */
126 #define	SYS_OFF_PPPSR	0x70	/* Offset of second Power Supply Status */
127 #define	SYS_STATUS1_PADDR	0x1fff8906010 /* physical address for physio */
128 
129 /* Register set 2 (not present on old vintage clock boards) */
130 #define	CLK_VERSION_REG	0x0	/* Offset of clock version register */
131 #define	CLK_VERSION_REG_PADDR 0x1fff890c000 /* physical address for physio */
132 
133 /* Important bits for the board version register */
134 #define	OLD_CLK_GEN	0x1
135 #define	OLD_CLK_DIV	0x2
136 
137 #define	RMT_CONS_OFFSET	0x4004	/* Offset of Remote Console UART */
138 #define	RMT_CONS_LEN	0x8	/* Size of Remote Console UART */
139 
140 /* Bit field defines for System Control register */
141 #define	SYS_PPS_FAN_FAIL_EN	0x80	/* PPS Fan Fail Interrupt Enable */
142 #define	SYS_PS_FAIL_EN		0x40	/* PS DC Fail Interrupt Enable */
143 #define	SYS_AC_PWR_FAIL_EN	0x20	/* AC Power Fail Interrupt Enable */
144 #define	SYS_SBRD_PRES_EN	0x10	/* Board Insertion Interrupt En */
145 #define	SYS_PWR_OFF		0x08	/* Bit to turn system power */
146 #define	SYS_LED_LEFT		0x04	/* System Left LED. Reverse Logic */
147 #define	SYS_LED_MID		0x02	/* System Middle LED */
148 #define	SYS_LED_RIGHT		0x01	/* System Right LED */
149 
150 /* Bit field defines for System Status1 register */
151 #define	SYS_SLOTS		0xC0	/* system type slot field */
152 #define	SYS_NOT_SECURE		0x20	/* ==0 Keyswitch in secure pos. */
153 #define	SYS_NOT_P_FAN_PRES	0x10	/* ==0 PPS cooling tray present */
154 #define	SYS_NOT_BRD_PRES	0x08	/* ==0 When board inserted */
155 #define	SYS_NOT_PPS0_PRES	0x04	/* ==0 If PPS0 present */
156 #define	SYS_TOD_NOT_RST		0x02	/* ==0 if TOD reset occurred */
157 #define	SYS_GEN_NOT_RST		0x01	/* ==0 if clock freq reset occured */
158 
159 /* Macros to determine system type from System Status1 register */
160 #define	SYS_TYPE(x)		((x) & SYS_SLOTS)
161 #define	SYS_16_SLOT		0x40
162 #define	SYS_8_SLOT		0xC0
163 #define	SYS_4_SLOT		0x80
164 #define	SYS_TESTBED		0x00
165 
166 /* Bit field defines for Clock Version Register */
167 #define	SYS_SLOTS2		0x80	/* system type slot2 mask */
168 #define	SYS_PLUS_SYSTEM		0x00	/* bit 7 is low for plus system */
169 
170 /* Macros to determine frequency capability from clock version register */
171 #define	SYS_TYPE2(x)		((x) & SYS_SLOTS2)
172 #define	ISPLUSSYS(reg)		((reg != 0) && \
173 					(SYS_TYPE2(*reg) == SYS_PLUS_SYSTEM))
174 
175 /* Macros to determine system type based on number of physical slots */
176 #define	IS4SLOT(n)		((n) == 4)
177 #define	IS5SLOT(n)		((n) == 5)
178 #define	IS8SLOT(n)		((n) == 8)
179 #define	IS16SLOT(n)		((n) == 16)
180 #define	ISTESTBED(n)		((n) == 0)
181 
182 /* Bit field defines for System Status2 register */
183 #define	SYS_RMTE_NOT_RST	0x80	/* Remote Console reset occurred */
184 #define	SYS_PPS0_OK		0x40	/* ==1 PPS0 OK */
185 #define	SYS_CLK_33_OK		0x20	/* 3.3V OK on clock board */
186 #define	SYS_CLK_50_OK		0x10	/* 5.0V OK on clock board */
187 #define	SYS_AC_FAIL		0x08	/* System lost AC Power source */
188 #define	SYS_RACK_FANFAIL	0x04	/* Peripheral Rack fan status */
189 #define	SYS_AC_FAN_OK		0x02	/* Status of 4 AC box fans */
190 #define	SYS_KEYSW_FAN_OK	0x01	/* Status of keyswitch fan */
191 
192 /* Bit field defines for Power Supply Presence register */
193 #define	SYS_NOT_PPS1_PRES	0x80	/* ==0 if PPS1 present in 4slot */
194 
195 /* Bit field defines for Precharge and Peripheral Power Status register */
196 #define	SYS_NOT_CURRENT_S	0x80	/* Current share backplane */
197 #define	SYS_PPPSR_BITS		0x7f	/* bulk test bit mask */
198 #define	SYS_V5_P_OK		0x40	/* ==1 peripheral 5v ok */
199 #define	SYS_V12_P_OK		0x20	/* ==1 peripheral 12v ok */
200 #define	SYS_V5_AUX_OK		0x10	/* ==1 auxiliary 5v ok */
201 #define	SYS_V5_P_PCH_OK		0x08	/* ==1 peripheral 5v precharge ok */
202 #define	SYS_V12_P_PCH_OK	0x04	/* ==1 peripheral 12v precharge ok */
203 #define	SYS_V3_PCH_OK		0x02	/* ==1 system 3.3v precharge ok */
204 #define	SYS_V5_PCH_OK		0x01	/* ==1 system 5.0v precharge ok */
205 
206 #ifndef _ASM
207 
208 #define	SYSCTRL_KSTAT_NAME	"sysctrl"
209 #define	CSR_KSTAT_NAMED		"csr"
210 #define	STAT1_KSTAT_NAMED	"status1"
211 #define	STAT2_KSTAT_NAMED	"status2"
212 #define	CLK_FREQ2_KSTAT_NAMED	"clk_freq2"
213 #define	FAN_KSTAT_NAMED		"fan_status"
214 #define	KEY_KSTAT_NAMED		"key_status"
215 #define	POWER_KSTAT_NAMED	"power_status"
216 #define	BDLIST_KSTAT_NAME	"bd_list"
217 #define	CLK_VER_KSTAT_NAME	"clk_ver"
218 
219 /*
220  * The Power Supply shadow kstat is too large to fit in a kstat_named
221  * struct, so it has been changed to be a raw kstat.
222  */
223 #define	PSSHAD_KSTAT_NAME	"ps_shadow"
224 
225 /* States of a power supply DC voltage. */
226 enum e_state { PS_BOOT = 0, PS_OUT, PS_UNKNOWN, PS_OK, PS_FAIL };
227 enum e_pres_state { PRES_UNKNOWN = 0, PRES_IN, PRES_OUT };
228 
229 /*
230  * several power supplies are managed -- 8 core power supplies,
231  * up to two pps, a couple of clock board powers and a register worth
232  * of precharges.
233  */
234 #define	SYS_PS_COUNT 19
235 /* core PS 0 thru 7 are index 0 thru 7 */
236 #define	SYS_PPS0_INDEX		8
237 #define	SYS_CLK_33_INDEX	9
238 #define	SYS_CLK_50_INDEX	10
239 #define	SYS_V5_P_INDEX		11
240 #define	SYS_V12_P_INDEX		12
241 #define	SYS_V5_AUX_INDEX	13
242 #define	SYS_V5_P_PCH_INDEX	14
243 #define	SYS_V12_P_PCH_INDEX	15
244 #define	SYS_V3_PCH_INDEX	16
245 #define	SYS_V5_PCH_INDEX	17
246 #define	SYS_P_FAN_INDEX		18	/* the peripheral fan assy */
247 
248 /* fan timeout structures */
249 enum pps_fan_type { RACK = 0, AC = 1, KEYSW = 2 };
250 #define	SYS_PPS_FAN_COUNT	3
251 
252 /*
253  * States of the secure key switch position.
254  */
255 enum keyswitch_state { KEY_BOOT = 0, KEY_SECURE, KEY_NOT_SECURE };
256 
257 /* Redundant power states */
258 enum power_state { BOOT = 0, BELOW_MINIMUM, MINIMUM, REDUNDANT };
259 
260 /*
261  * minor device mask
262  * B	- bottom 4 bits (16 slots) are for the slot/receptacle id
263  * I	- next 4 bits are for the instance number
264  * X	- rest are not used
265  *
266  * Upper                  Lower
267  * XXXXX...............IIIIBBBB
268  *
269  * Example:
270  * device at instance 0 and slot 8, minor device number 0x8 = decimal 8
271  * device at instance 1 and slot 10, minor device number 0x1A = decimal 26
272  */
273 #define	SYSC_SLOT_MASK		0x0F
274 #define	SYSC_INSTANCE_MASK	0xF0
275 #define	SYSC_INSTANCE_SHIFT	4
276 
277 /* Macro definitions */
278 #define	HOTPLUG_DISABLED_PROPERTY "hotplug-disabled"
279 #define	GETSLOT(unit)		(getminor(unit) & SYSC_SLOT_MASK)
280 #define	GETINSTANCE(unit) \
281 	((getminor(unit) & SYSC_INSTANCE_MASK) >> SYSC_INSTANCE_SHIFT)
282 #define	PUTINSTANCE(inst) \
283 	(((inst) << SYSC_INSTANCE_SHIFT) & SYSC_INSTANCE_MASK)
284 #define	GETSOFTC(i) \
285 	((struct sysctrl_soft_state *)ddi_get_soft_state(sysctrlp, getminor(i)))
286 
287 /*
288  * Definition of sysctrl ioctls.
289  */
290 #define	SYSC_IOC		('H'<<8)
291 
292 #define	SYSC_CFGA_CMD_GETSTATUS		(SYSC_IOC|68)
293 #define	SYSC_CFGA_CMD_EJECT		(SYSC_IOC|69)
294 #define	SYSC_CFGA_CMD_INSERT		(SYSC_IOC|70)
295 #define	SYSC_CFGA_CMD_CONNECT		(SYSC_IOC|71)
296 #define	SYSC_CFGA_CMD_DISCONNECT	(SYSC_IOC|72)
297 #define	SYSC_CFGA_CMD_UNCONFIGURE	(SYSC_IOC|73)
298 #define	SYSC_CFGA_CMD_CONFIGURE		(SYSC_IOC|74)
299 #define	SYSC_CFGA_CMD_TEST		(SYSC_IOC|75)
300 #define	SYSC_CFGA_CMD_TEST_SET_COND	(SYSC_IOC|76)
301 #define	SYSC_CFGA_CMD_QUIESCE_TEST	(SYSC_IOC|77)
302 
303 #if defined(_KERNEL)
304 
305 #define	SPUR_TIMEOUT_USEC			(1 * MICROSEC)
306 #define	SPUR_LONG_TIMEOUT_USEC			(5 * MICROSEC)
307 #define	AC_TIMEOUT_USEC				(1 * MICROSEC)
308 #define	PS_FAIL_TIMEOUT_USEC			(500 * (MICROSEC / MILLISEC))
309 #define	PPS_FAN_TIMEOUT_USEC			(1 * MICROSEC)
310 
311 #define	BRD_INSERT_DELAY_USEC			(500 * (MICROSEC / MILLISEC))
312 #define	BRD_INSERT_RETRY_USEC			(5 * MICROSEC)
313 #define	BRD_REMOVE_TIMEOUT_USEC			(2 * MICROSEC)
314 #define	BLINK_LED_TIMEOUT_USEC			(300 * (MICROSEC / MILLISEC))
315 #define	KEYSWITCH_TIMEOUT_USEC			(1 * MICROSEC)
316 
317 #define	PS_INSUFFICIENT_COUNTDOWN_SEC		30
318 
319 /*
320  * how many ticks to wait to register the state change
321  * NOTE: ticks are measured in PS_FAIL_TIMEOUT_USEC clicks
322  */
323 #define	PS_PRES_CHANGE_TICKS	1
324 #define	PS_FROM_BOOT_TICKS	1
325 #define	PS_FROM_UNKNOWN_TICKS	10
326 #define	PS_POWER_COUNTDOWN_TICKS 60
327 
328 /* Note: this timeout needs to be longer than FAN_OK_TIMEOUT_USEC */
329 #define	PS_P_FAN_FROM_UNKNOWN_TICKS 15
330 
331 #define	PS_FROM_OK_TICKS	1
332 #define	PS_PCH_FROM_OK_TICKS	3
333 #define	PS_FROM_FAIL_TICKS	4
334 
335 /* NOTE: these ticks are measured in PPS_FAN_TIMEOUT_USEC clicks */
336 #define	PPS_FROM_FAIL_TICKS	7
337 
338 /*
339  * how many spurious interrupts to take during a SPUR_LONG_TIMEOUT_USEC
340  * before complaining
341  */
342 #define	MAX_SPUR_COUNT		2
343 
344 /*
345  * Global driver structure which defines the presence and status of
346  * all board power supplies.
347  */
348 struct ps_state {
349 	int pctr;			/* tick counter for presense deglitch */
350 	int dcctr;			/* tick counter for dc ok deglitch */
351 	enum e_pres_state pshadow;	/* presense shadow state */
352 	enum e_state dcshadow;		/* dc ok shadow state */
353 };
354 
355 /*
356  * for sysctrl_thread_wakeup()
357  */
358 #define	OVERTEMP_POLL	1
359 #define	KEYSWITCH_POLL	2
360 
361 /*
362  * Structures used in the driver to manage the hardware
363  * XXX will need to add a nodeid
364  */
365 struct sysctrl_soft_state {
366 	dev_info_t *dip;		/* dev info of myself */
367 	dev_info_t *pdip;		/* dev info of parent */
368 	struct sysctrl_soft_state *next;
369 	int mondo;			/* INO for this type of interrupt */
370 	uchar_t nslots;			/* slots in this system (0-16) */
371 
372 	pnode_t options_nodeid;		/* for nvram powerfail-time */
373 
374 	ddi_iblock_cookie_t iblock;	/* High level interrupt cookie */
375 	ddi_idevice_cookie_t idevice;	/* TODO - Do we need this? */
376 	ddi_softintr_t spur_id;		/* when we get a spurious int... */
377 	ddi_iblock_cookie_t spur_int_c;	/* spur int cookie */
378 	ddi_softintr_t spur_high_id;	/* when we reenable disabled ints */
379 	ddi_softintr_t spur_long_to_id;	/* long timeout softint */
380 	ddi_softintr_t ac_fail_id;	/* ac fail softintr id */
381 	ddi_softintr_t ac_fail_high_id;	/* ac fail re-enable softintr id */
382 	ddi_softintr_t ps_fail_int_id;	/* ps fail from intr softintr id */
383 	ddi_iblock_cookie_t ps_fail_c;	/* ps fail softintr cookie */
384 	ddi_softintr_t ps_fail_poll_id;	/* ps fail from polling softintr */
385 	ddi_softintr_t pps_fan_id;	/* pps fan fail softintr id */
386 	ddi_softintr_t pps_fan_high_id;	/* pps fan re-enable softintr id */
387 	ddi_softintr_t sbrd_pres_id;	/* sbrd softintr id */
388 	ddi_softintr_t sbrd_gone_id;	/* sbrd removed softintr id */
389 	ddi_softintr_t blink_led_id;	/* led blinker softint */
390 	ddi_iblock_cookie_t sys_led_c;	/* mutex cookie for sys LED lock */
391 
392 	volatile uchar_t *clk_freq1;	/* Clock frequency reg. 1 */
393 	volatile uchar_t *clk_freq2;	/* Clock frequency reg. 2 */
394 	volatile uchar_t *status1;	/* System Status1 register */
395 	volatile uchar_t *status2;	/* System Status2 register */
396 	volatile uchar_t *ps_stat;	/* Power Supply Status register */
397 	volatile uchar_t *ps_pres;	/* Power Supply Presence register */
398 	volatile uchar_t *pppsr;	/* 2nd Power Supply Status register */
399 	volatile uchar_t *temp_reg;	/* VA of temperature register */
400 	volatile uchar_t *rcons_ctl;	/* VA of Remote console UART */
401 	volatile uchar_t *clk_ver;	/* clock version register */
402 
403 	/* This mutex protects the following data */
404 	/* NOTE: *csr should only be accessed from interrupt level */
405 	kmutex_t csr_mutex;		/* locking for csr enable bits */
406 	volatile uchar_t *csr;		/* System Control Register */
407 	uchar_t pps_fan_saved;		/* cached pps fanfail state */
408 	uchar_t saved_en_state;		/* spurious int cache */
409 	int spur_count;			/* count multiple spurious ints */
410 
411 	/* This mutex protects the following data */
412 	kmutex_t spur_int_lock;		/* lock spurious interrupt data */
413 	timeout_id_t spur_timeout_id;	/* quiet the int timeout id */
414 	timeout_id_t spur_long_timeout_id; /* spurious long timeout interval */
415 
416 	/* This mutex protects the following data */
417 	kmutex_t ps_fail_lock;		/* low level lock */
418 	struct ps_state ps_stats[SYS_PS_COUNT]; /* state struct for all ps */
419 	enum power_state power_state;	/* redundant power state */
420 	int power_countdown;		/* clicks until reboot */
421 
422 	/* This mutex protects the following data */
423 	kmutex_t sys_led_lock;		/* low level lock */
424 	int sys_led;			/* on (TRUE) or off (FALSE) */
425 	int sys_fault;			/* on (TRUE) or off (FALSE) */
426 
427 	/* various elements protected by their inherent access patterns */
428 	int pps_fan_external_state;	/* external state of the pps fans */
429 	int pps_fan_state_count[SYS_PPS_FAN_COUNT]; /* fan state counter */
430 	struct temp_stats tempstat;	/* in memory storage of temperature */
431 	enum keyswitch_state key_shadow; /* external state of the key switch */
432 
433 	int enable_rcons_atboot;	/* enable remote console at boot */
434 };
435 
436 /*
437  * Kstat structures used to contain data which is requested by user
438  * programs.
439  */
440 struct sysctrl_kstat {
441 	struct kstat_named	csr;		/* system control register */
442 	struct kstat_named	status1;	/* system status 1 */
443 	struct kstat_named	status2;	/* system status 2 */
444 	struct kstat_named	clk_freq2;	/* Clock register 2 */
445 	struct kstat_named	fan_status;	/* shadow status 2 for fans */
446 	struct kstat_named	key_status;	/* shadow status for key */
447 	struct kstat_named	power_state;	/* redundant power status */
448 	struct kstat_named	clk_ver;	/* clock version register */
449 };
450 
451 #define	SYSC_ERR_SET(pkt, err)	(pkt)->cmd_cfga.errtype = (err)
452 
453 /*
454  * Function prototype
455  */
456 int sysc_policy_disconnect(struct sysctrl_soft_state *,
457 				sysc_cfga_pkt_t *, sysc_cfga_stat_t *);
458 int sysc_policy_connect(struct sysctrl_soft_state *,
459 				sysc_cfga_pkt_t *, sysc_cfga_stat_t *);
460 int sysc_policy_unconfigure(struct sysctrl_soft_state *,
461 				sysc_cfga_pkt_t *, sysc_cfga_stat_t *);
462 int sysc_policy_configure(struct sysctrl_soft_state *,
463 				sysc_cfga_pkt_t *, sysc_cfga_stat_t *);
464 
465 void sysc_policy_update(void *softsp, sysc_cfga_stat_t *sc, sysc_evt_t event);
466 
467 extern void		sysctrl_suspend_prepare(void);
468 extern int		sysctrl_suspend(sysc_cfga_pkt_t *);
469 extern void		sysctrl_resume(sysc_cfga_pkt_t *);
470 
471 #endif /* _KERNEL */
472 #endif /* _ASM */
473 
474 #ifdef	__cplusplus
475 }
476 #endif
477 
478 #endif	/* _SYS_SYSCTRL_H */
479