1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Ralink RT288x SoC PCI register definitions
4 *
5 * Copyright (C) 2009 John Crispin <john@phrozen.org>
6 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
7 *
8 * Parts of this file are based on Ralink's 2.6.21 BSP
9 */
10
11 #include <linux/delay.h>
12 #include <linux/types.h>
13 #include <linux/pci.h>
14 #include <linux/io.h>
15 #include <linux/init.h>
16 #include <linux/mod_devicetable.h>
17 #include <linux/platform_device.h>
18
19 #include <asm/mach-ralink/rt288x.h>
20
21 #define RT2880_PCI_BASE 0x00440000
22 #define RT288X_CPU_IRQ_PCI 4
23
24 #define RT2880_PCI_MEM_BASE 0x20000000
25 #define RT2880_PCI_MEM_SIZE 0x10000000
26 #define RT2880_PCI_IO_BASE 0x00460000
27 #define RT2880_PCI_IO_SIZE 0x00010000
28
29 #define RT2880_PCI_REG_PCICFG_ADDR 0x00
30 #define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
31 #define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
32 #define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
33 #define RT2880_PCI_REG_CONFIG_ADDR 0x20
34 #define RT2880_PCI_REG_CONFIG_DATA 0x24
35 #define RT2880_PCI_REG_MEMBASE 0x28
36 #define RT2880_PCI_REG_IOBASE 0x2c
37 #define RT2880_PCI_REG_ID 0x30
38 #define RT2880_PCI_REG_CLASS 0x34
39 #define RT2880_PCI_REG_SUBID 0x38
40 #define RT2880_PCI_REG_ARBCTL 0x80
41
42 static void __iomem *rt2880_pci_base;
43
rt2880_pci_reg_read(u32 reg)44 static u32 rt2880_pci_reg_read(u32 reg)
45 {
46 return readl(rt2880_pci_base + reg);
47 }
48
rt2880_pci_reg_write(u32 val,u32 reg)49 static void rt2880_pci_reg_write(u32 val, u32 reg)
50 {
51 writel(val, rt2880_pci_base + reg);
52 }
53
rt2880_pci_get_cfgaddr(unsigned int bus,unsigned int slot,unsigned int func,unsigned int where)54 static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
55 unsigned int func, unsigned int where)
56 {
57 return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
58 0x80000000);
59 }
60
rt2880_pci_config_read(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * val)61 static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
62 int where, int size, u32 *val)
63 {
64 u32 address;
65 u32 data;
66
67 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
68 PCI_FUNC(devfn), where);
69
70 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
71 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
72
73 switch (size) {
74 case 1:
75 *val = (data >> ((where & 3) << 3)) & 0xff;
76 break;
77 case 2:
78 *val = (data >> ((where & 3) << 3)) & 0xffff;
79 break;
80 case 4:
81 *val = data;
82 break;
83 }
84
85 return PCIBIOS_SUCCESSFUL;
86 }
87
rt2880_pci_config_write(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 val)88 static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
89 int where, int size, u32 val)
90 {
91 u32 address;
92 u32 data;
93
94 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
95 PCI_FUNC(devfn), where);
96
97 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
98 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
99
100 switch (size) {
101 case 1:
102 data = (data & ~(0xff << ((where & 3) << 3))) |
103 (val << ((where & 3) << 3));
104 break;
105 case 2:
106 data = (data & ~(0xffff << ((where & 3) << 3))) |
107 (val << ((where & 3) << 3));
108 break;
109 case 4:
110 data = val;
111 break;
112 }
113
114 rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
115
116 return PCIBIOS_SUCCESSFUL;
117 }
118
119 static struct pci_ops rt2880_pci_ops = {
120 .read = rt2880_pci_config_read,
121 .write = rt2880_pci_config_write,
122 };
123
124 static struct resource rt2880_pci_mem_resource = {
125 .name = "PCI MEM space",
126 .start = RT2880_PCI_MEM_BASE,
127 .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
128 .flags = IORESOURCE_MEM,
129 };
130
131 static struct resource rt2880_pci_io_resource = {
132 .name = "PCI IO space",
133 .start = RT2880_PCI_IO_BASE,
134 .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
135 .flags = IORESOURCE_IO,
136 };
137
138 static struct pci_controller rt2880_pci_controller = {
139 .pci_ops = &rt2880_pci_ops,
140 .mem_resource = &rt2880_pci_mem_resource,
141 .io_resource = &rt2880_pci_io_resource,
142 };
143
rt2880_pci_read_u32(unsigned long reg)144 static inline u32 rt2880_pci_read_u32(unsigned long reg)
145 {
146 u32 address;
147 u32 ret;
148
149 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
150
151 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
152 ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
153
154 return ret;
155 }
156
rt2880_pci_write_u32(unsigned long reg,u32 val)157 static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
158 {
159 u32 address;
160
161 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
162
163 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
164 rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
165 }
166
pcibios_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)167 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
168 {
169 int irq = -1;
170
171 if (dev->bus->number != 0)
172 return irq;
173
174 switch (PCI_SLOT(dev->devfn)) {
175 case 0x00:
176 break;
177 case 0x11:
178 irq = RT288X_CPU_IRQ_PCI;
179 break;
180 default:
181 pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",
182 __FILE__, __func__, __LINE__);
183 BUG();
184 break;
185 }
186
187 return irq;
188 }
189
rt288x_pci_probe(struct platform_device * pdev)190 static int rt288x_pci_probe(struct platform_device *pdev)
191 {
192 void __iomem *io_map_base;
193
194 rt2880_pci_base = ioremap(RT2880_PCI_BASE, PAGE_SIZE);
195
196 io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
197 rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
198 set_io_port_base((unsigned long) io_map_base);
199
200 ioport_resource.start = RT2880_PCI_IO_BASE;
201 ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
202
203 rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
204 udelay(1);
205
206 rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
207 rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
208 rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
209 rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
210 rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
211 rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
212 rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
213 rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
214 rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
215
216 rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
217 (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
218
219 rt2880_pci_controller.of_node = pdev->dev.of_node;
220
221 register_pci_controller(&rt2880_pci_controller);
222 return 0;
223 }
224
pcibios_plat_dev_init(struct pci_dev * dev)225 int pcibios_plat_dev_init(struct pci_dev *dev)
226 {
227 static bool slot0_init;
228
229 /*
230 * Nobody seems to initialize slot 0, but this platform requires it, so
231 * do it once when some other slot is being enabled. The PCI subsystem
232 * should configure other slots properly, so no need to do anything
233 * special for those.
234 */
235 if (!slot0_init && dev->bus->number == 0) {
236 u16 cmd;
237 u32 bar0;
238
239 slot0_init = true;
240
241 pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
242 0x08000000);
243 pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
244 &bar0);
245
246 pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd);
247 cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
248 pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd);
249 }
250
251 return 0;
252 }
253
254 static const struct of_device_id rt288x_pci_match[] = {
255 { .compatible = "ralink,rt288x-pci" },
256 {},
257 };
258
259 static struct platform_driver rt288x_pci_driver = {
260 .probe = rt288x_pci_probe,
261 .driver = {
262 .name = "rt288x-pci",
263 .of_match_table = rt288x_pci_match,
264 },
265 };
266
pcibios_init(void)267 int __init pcibios_init(void)
268 {
269 int ret = platform_driver_register(&rt288x_pci_driver);
270
271 if (ret)
272 pr_info("rt288x-pci: Error registering platform driver!");
273
274 return ret;
275 }
276
277 arch_initcall(pcibios_init);
278