1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) STMicroelectronics 2018
3 // Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
4
5 #include <linux/interrupt.h>
6 #include <linux/mfd/stpmic1.h>
7 #include <linux/module.h>
8 #include <linux/of_irq.h>
9 #include <linux/platform_device.h>
10 #include <linux/regmap.h>
11 #include <linux/regulator/driver.h>
12 #include <linux/regulator/machine.h>
13 #include <linux/regulator/of_regulator.h>
14
15 #include <dt-bindings/mfd/st,stpmic1.h>
16
17 /**
18 * struct stpmic1_regulator_cfg - this structure is used as driver data
19 * @desc: regulator framework description
20 * @mask_reset_reg: mask reset register address
21 * @mask_reset_mask: mask rank and mask reset register mask
22 * @icc_reg: icc register address
23 * @icc_mask: icc register mask
24 */
25 struct stpmic1_regulator_cfg {
26 struct regulator_desc desc;
27 u8 mask_reset_reg;
28 u8 mask_reset_mask;
29 u8 icc_reg;
30 u8 icc_mask;
31 };
32
33 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
34 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
35 static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity,
36 bool enable);
37 static unsigned int stpmic1_map_mode(unsigned int mode);
38
39 enum {
40 STPMIC1_BUCK1 = 0,
41 STPMIC1_BUCK2 = 1,
42 STPMIC1_BUCK3 = 2,
43 STPMIC1_BUCK4 = 3,
44 STPMIC1_LDO1 = 4,
45 STPMIC1_LDO2 = 5,
46 STPMIC1_LDO3 = 6,
47 STPMIC1_LDO4 = 7,
48 STPMIC1_LDO5 = 8,
49 STPMIC1_LDO6 = 9,
50 STPMIC1_VREF_DDR = 10,
51 STPMIC1_BOOST = 11,
52 STPMIC1_VBUS_OTG = 12,
53 STPMIC1_SW_OUT = 13,
54 };
55
56 /* Enable time worst case is 5000mV/(2250uV/uS) */
57 #define PMIC_ENABLE_TIME_US 2200
58 /* Ramp delay worst case is (2250uV/uS) */
59 #define PMIC_RAMP_DELAY 2200
60
61 static const struct linear_range buck1_ranges[] = {
62 REGULATOR_LINEAR_RANGE(725000, 0, 4, 0),
63 REGULATOR_LINEAR_RANGE(725000, 5, 36, 25000),
64 REGULATOR_LINEAR_RANGE(1500000, 37, 63, 0),
65 };
66
67 static const struct linear_range buck2_ranges[] = {
68 REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
69 REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
70 REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
71 REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0),
72 REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0),
73 REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0),
74 REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
75 REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
76 REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
77 REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
78 REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
79 };
80
81 static const struct linear_range buck3_ranges[] = {
82 REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
83 REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
84 REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
85 REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0),
86 REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
87 REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
88 REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
89 };
90
91 static const struct linear_range buck4_ranges[] = {
92 REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
93 REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
94 REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
95 REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
96 REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
97 REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
98 REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
99 };
100
101 static const struct linear_range ldo1_ranges[] = {
102 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
103 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
104 REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
105 };
106
107 static const struct linear_range ldo2_ranges[] = {
108 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
109 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
110 REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
111 };
112
113 static const struct linear_range ldo3_ranges[] = {
114 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
115 REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
116 REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
117 /* with index 31 LDO3 is in DDR mode */
118 REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
119 };
120
121 static const struct linear_range ldo5_ranges[] = {
122 REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
123 REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
124 REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
125 };
126
127 static const struct linear_range ldo6_ranges[] = {
128 REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
129 REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
130 };
131
132 static const struct regulator_ops stpmic1_ldo_ops = {
133 .list_voltage = regulator_list_voltage_linear_range,
134 .map_voltage = regulator_map_voltage_linear_range,
135 .is_enabled = regulator_is_enabled_regmap,
136 .enable = regulator_enable_regmap,
137 .disable = regulator_disable_regmap,
138 .get_voltage_sel = regulator_get_voltage_sel_regmap,
139 .set_voltage_sel = regulator_set_voltage_sel_regmap,
140 .set_over_current_protection = stpmic1_set_icc,
141 };
142
143 static const struct regulator_ops stpmic1_ldo3_ops = {
144 .list_voltage = regulator_list_voltage_linear_range,
145 .map_voltage = regulator_map_voltage_iterate,
146 .is_enabled = regulator_is_enabled_regmap,
147 .enable = regulator_enable_regmap,
148 .disable = regulator_disable_regmap,
149 .get_voltage_sel = regulator_get_voltage_sel_regmap,
150 .set_voltage_sel = regulator_set_voltage_sel_regmap,
151 .get_bypass = regulator_get_bypass_regmap,
152 .set_bypass = regulator_set_bypass_regmap,
153 .set_over_current_protection = stpmic1_set_icc,
154 };
155
156 static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
157 .is_enabled = regulator_is_enabled_regmap,
158 .enable = regulator_enable_regmap,
159 .disable = regulator_disable_regmap,
160 .set_over_current_protection = stpmic1_set_icc,
161 };
162
163 static const struct regulator_ops stpmic1_buck_ops = {
164 .list_voltage = regulator_list_voltage_linear_range,
165 .map_voltage = regulator_map_voltage_linear_range,
166 .is_enabled = regulator_is_enabled_regmap,
167 .enable = regulator_enable_regmap,
168 .disable = regulator_disable_regmap,
169 .get_voltage_sel = regulator_get_voltage_sel_regmap,
170 .set_voltage_sel = regulator_set_voltage_sel_regmap,
171 .set_pull_down = regulator_set_pull_down_regmap,
172 .set_mode = stpmic1_set_mode,
173 .get_mode = stpmic1_get_mode,
174 .set_over_current_protection = stpmic1_set_icc,
175 };
176
177 static const struct regulator_ops stpmic1_vref_ddr_ops = {
178 .is_enabled = regulator_is_enabled_regmap,
179 .enable = regulator_enable_regmap,
180 .disable = regulator_disable_regmap,
181 };
182
183 static const struct regulator_ops stpmic1_boost_regul_ops = {
184 .is_enabled = regulator_is_enabled_regmap,
185 .enable = regulator_enable_regmap,
186 .disable = regulator_disable_regmap,
187 .set_over_current_protection = stpmic1_set_icc,
188 };
189
190 static const struct regulator_ops stpmic1_switch_regul_ops = {
191 .is_enabled = regulator_is_enabled_regmap,
192 .enable = regulator_enable_regmap,
193 .disable = regulator_disable_regmap,
194 .set_over_current_protection = stpmic1_set_icc,
195 .set_active_discharge = regulator_set_active_discharge_regmap,
196 };
197
198 #define REG_LDO(ids, base) { \
199 .name = #ids, \
200 .id = STPMIC1_##ids, \
201 .n_voltages = 32, \
202 .ops = &stpmic1_ldo_ops, \
203 .linear_ranges = base ## _ranges, \
204 .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
205 .type = REGULATOR_VOLTAGE, \
206 .owner = THIS_MODULE, \
207 .vsel_reg = ids##_ACTIVE_CR, \
208 .vsel_mask = LDO_VOLTAGE_MASK, \
209 .enable_reg = ids##_ACTIVE_CR, \
210 .enable_mask = LDO_ENABLE_MASK, \
211 .enable_val = 1, \
212 .disable_val = 0, \
213 .enable_time = PMIC_ENABLE_TIME_US, \
214 .ramp_delay = PMIC_RAMP_DELAY, \
215 .supply_name = #base, \
216 }
217
218 #define REG_LDO3(ids, base) { \
219 .name = #ids, \
220 .id = STPMIC1_##ids, \
221 .n_voltages = 32, \
222 .ops = &stpmic1_ldo3_ops, \
223 .linear_ranges = ldo3_ranges, \
224 .n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \
225 .type = REGULATOR_VOLTAGE, \
226 .owner = THIS_MODULE, \
227 .vsel_reg = LDO3_ACTIVE_CR, \
228 .vsel_mask = LDO_VOLTAGE_MASK, \
229 .enable_reg = LDO3_ACTIVE_CR, \
230 .enable_mask = LDO_ENABLE_MASK, \
231 .enable_val = 1, \
232 .disable_val = 0, \
233 .enable_time = PMIC_ENABLE_TIME_US, \
234 .ramp_delay = PMIC_RAMP_DELAY, \
235 .bypass_reg = LDO3_ACTIVE_CR, \
236 .bypass_mask = LDO_BYPASS_MASK, \
237 .bypass_val_on = LDO_BYPASS_MASK, \
238 .bypass_val_off = 0, \
239 .supply_name = #base, \
240 }
241
242 #define REG_LDO4(ids, base) { \
243 .name = #ids, \
244 .id = STPMIC1_##ids, \
245 .n_voltages = 1, \
246 .ops = &stpmic1_ldo4_fixed_regul_ops, \
247 .type = REGULATOR_VOLTAGE, \
248 .owner = THIS_MODULE, \
249 .min_uV = 3300000, \
250 .fixed_uV = 3300000, \
251 .enable_reg = LDO4_ACTIVE_CR, \
252 .enable_mask = LDO_ENABLE_MASK, \
253 .enable_val = 1, \
254 .disable_val = 0, \
255 .enable_time = PMIC_ENABLE_TIME_US, \
256 .ramp_delay = PMIC_RAMP_DELAY, \
257 .supply_name = #base, \
258 }
259
260 #define REG_BUCK(ids, base) { \
261 .name = #ids, \
262 .id = STPMIC1_##ids, \
263 .ops = &stpmic1_buck_ops, \
264 .n_voltages = 64, \
265 .linear_ranges = base ## _ranges, \
266 .n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
267 .type = REGULATOR_VOLTAGE, \
268 .owner = THIS_MODULE, \
269 .vsel_reg = ids##_ACTIVE_CR, \
270 .vsel_mask = BUCK_VOLTAGE_MASK, \
271 .enable_reg = ids##_ACTIVE_CR, \
272 .enable_mask = BUCK_ENABLE_MASK, \
273 .enable_val = 1, \
274 .disable_val = 0, \
275 .enable_time = PMIC_ENABLE_TIME_US, \
276 .ramp_delay = PMIC_RAMP_DELAY, \
277 .of_map_mode = stpmic1_map_mode, \
278 .pull_down_reg = ids##_PULL_DOWN_REG, \
279 .pull_down_mask = ids##_PULL_DOWN_MASK, \
280 .supply_name = #base, \
281 }
282
283 #define REG_VREF_DDR(ids, base) { \
284 .name = #ids, \
285 .id = STPMIC1_##ids, \
286 .n_voltages = 1, \
287 .ops = &stpmic1_vref_ddr_ops, \
288 .type = REGULATOR_VOLTAGE, \
289 .owner = THIS_MODULE, \
290 .min_uV = 500000, \
291 .fixed_uV = 500000, \
292 .enable_reg = VREF_DDR_ACTIVE_CR, \
293 .enable_mask = BUCK_ENABLE_MASK, \
294 .enable_val = 1, \
295 .disable_val = 0, \
296 .enable_time = PMIC_ENABLE_TIME_US, \
297 .supply_name = #base, \
298 }
299
300 #define REG_BOOST(ids, base) { \
301 .name = #ids, \
302 .id = STPMIC1_##ids, \
303 .n_voltages = 1, \
304 .ops = &stpmic1_boost_regul_ops, \
305 .type = REGULATOR_VOLTAGE, \
306 .owner = THIS_MODULE, \
307 .min_uV = 0, \
308 .fixed_uV = 5000000, \
309 .enable_reg = BST_SW_CR, \
310 .enable_mask = BOOST_ENABLED, \
311 .enable_val = BOOST_ENABLED, \
312 .disable_val = 0, \
313 .enable_time = PMIC_ENABLE_TIME_US, \
314 .supply_name = #base, \
315 }
316
317 #define REG_VBUS_OTG(ids, base) { \
318 .name = #ids, \
319 .id = STPMIC1_##ids, \
320 .n_voltages = 1, \
321 .ops = &stpmic1_switch_regul_ops, \
322 .type = REGULATOR_VOLTAGE, \
323 .owner = THIS_MODULE, \
324 .min_uV = 0, \
325 .fixed_uV = 5000000, \
326 .enable_reg = BST_SW_CR, \
327 .enable_mask = USBSW_OTG_SWITCH_ENABLED, \
328 .enable_val = USBSW_OTG_SWITCH_ENABLED, \
329 .disable_val = 0, \
330 .enable_time = PMIC_ENABLE_TIME_US, \
331 .supply_name = #base, \
332 .active_discharge_reg = BST_SW_CR, \
333 .active_discharge_mask = VBUS_OTG_DISCHARGE, \
334 .active_discharge_on = VBUS_OTG_DISCHARGE, \
335 }
336
337 #define REG_SW_OUT(ids, base) { \
338 .name = #ids, \
339 .id = STPMIC1_##ids, \
340 .n_voltages = 1, \
341 .ops = &stpmic1_switch_regul_ops, \
342 .type = REGULATOR_VOLTAGE, \
343 .owner = THIS_MODULE, \
344 .min_uV = 0, \
345 .fixed_uV = 5000000, \
346 .enable_reg = BST_SW_CR, \
347 .enable_mask = SWIN_SWOUT_ENABLED, \
348 .enable_val = SWIN_SWOUT_ENABLED, \
349 .disable_val = 0, \
350 .enable_time = PMIC_ENABLE_TIME_US, \
351 .supply_name = #base, \
352 .active_discharge_reg = BST_SW_CR, \
353 .active_discharge_mask = SW_OUT_DISCHARGE, \
354 .active_discharge_on = SW_OUT_DISCHARGE, \
355 }
356
357 static const struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
358 [STPMIC1_BUCK1] = {
359 .desc = REG_BUCK(BUCK1, buck1),
360 .icc_reg = BUCKS_ICCTO_CR,
361 .icc_mask = BIT(0),
362 .mask_reset_reg = BUCKS_MASK_RESET_CR,
363 .mask_reset_mask = BIT(0),
364 },
365 [STPMIC1_BUCK2] = {
366 .desc = REG_BUCK(BUCK2, buck2),
367 .icc_reg = BUCKS_ICCTO_CR,
368 .icc_mask = BIT(1),
369 .mask_reset_reg = BUCKS_MASK_RESET_CR,
370 .mask_reset_mask = BIT(1),
371 },
372 [STPMIC1_BUCK3] = {
373 .desc = REG_BUCK(BUCK3, buck3),
374 .icc_reg = BUCKS_ICCTO_CR,
375 .icc_mask = BIT(2),
376 .mask_reset_reg = BUCKS_MASK_RESET_CR,
377 .mask_reset_mask = BIT(2),
378 },
379 [STPMIC1_BUCK4] = {
380 .desc = REG_BUCK(BUCK4, buck4),
381 .icc_reg = BUCKS_ICCTO_CR,
382 .icc_mask = BIT(3),
383 .mask_reset_reg = BUCKS_MASK_RESET_CR,
384 .mask_reset_mask = BIT(3),
385 },
386 [STPMIC1_LDO1] = {
387 .desc = REG_LDO(LDO1, ldo1),
388 .icc_reg = LDOS_ICCTO_CR,
389 .icc_mask = BIT(0),
390 .mask_reset_reg = LDOS_MASK_RESET_CR,
391 .mask_reset_mask = BIT(0),
392 },
393 [STPMIC1_LDO2] = {
394 .desc = REG_LDO(LDO2, ldo2),
395 .icc_reg = LDOS_ICCTO_CR,
396 .icc_mask = BIT(1),
397 .mask_reset_reg = LDOS_MASK_RESET_CR,
398 .mask_reset_mask = BIT(1),
399 },
400 [STPMIC1_LDO3] = {
401 .desc = REG_LDO3(LDO3, ldo3),
402 .icc_reg = LDOS_ICCTO_CR,
403 .icc_mask = BIT(2),
404 .mask_reset_reg = LDOS_MASK_RESET_CR,
405 .mask_reset_mask = BIT(2),
406 },
407 [STPMIC1_LDO4] = {
408 .desc = REG_LDO4(LDO4, ldo4),
409 .icc_reg = LDOS_ICCTO_CR,
410 .icc_mask = BIT(3),
411 .mask_reset_reg = LDOS_MASK_RESET_CR,
412 .mask_reset_mask = BIT(3),
413 },
414 [STPMIC1_LDO5] = {
415 .desc = REG_LDO(LDO5, ldo5),
416 .icc_reg = LDOS_ICCTO_CR,
417 .icc_mask = BIT(4),
418 .mask_reset_reg = LDOS_MASK_RESET_CR,
419 .mask_reset_mask = BIT(4),
420 },
421 [STPMIC1_LDO6] = {
422 .desc = REG_LDO(LDO6, ldo6),
423 .icc_reg = LDOS_ICCTO_CR,
424 .icc_mask = BIT(5),
425 .mask_reset_reg = LDOS_MASK_RESET_CR,
426 .mask_reset_mask = BIT(5),
427 },
428 [STPMIC1_VREF_DDR] = {
429 .desc = REG_VREF_DDR(VREF_DDR, vref_ddr),
430 .mask_reset_reg = LDOS_MASK_RESET_CR,
431 .mask_reset_mask = BIT(6),
432 },
433 [STPMIC1_BOOST] = {
434 .desc = REG_BOOST(BOOST, boost),
435 .icc_reg = BUCKS_ICCTO_CR,
436 .icc_mask = BIT(6),
437 },
438 [STPMIC1_VBUS_OTG] = {
439 .desc = REG_VBUS_OTG(VBUS_OTG, pwr_sw1),
440 .icc_reg = BUCKS_ICCTO_CR,
441 .icc_mask = BIT(4),
442 },
443 [STPMIC1_SW_OUT] = {
444 .desc = REG_SW_OUT(SW_OUT, pwr_sw2),
445 .icc_reg = BUCKS_ICCTO_CR,
446 .icc_mask = BIT(5),
447 },
448 };
449
stpmic1_map_mode(unsigned int mode)450 static unsigned int stpmic1_map_mode(unsigned int mode)
451 {
452 switch (mode) {
453 case STPMIC1_BUCK_MODE_NORMAL:
454 return REGULATOR_MODE_NORMAL;
455 case STPMIC1_BUCK_MODE_LP:
456 return REGULATOR_MODE_STANDBY;
457 default:
458 return REGULATOR_MODE_INVALID;
459 }
460 }
461
stpmic1_get_mode(struct regulator_dev * rdev)462 static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
463 {
464 int value;
465 struct regmap *regmap = rdev_get_regmap(rdev);
466
467 regmap_read(regmap, rdev->desc->enable_reg, &value);
468
469 if (value & STPMIC1_BUCK_MODE_LP)
470 return REGULATOR_MODE_STANDBY;
471
472 return REGULATOR_MODE_NORMAL;
473 }
474
stpmic1_set_mode(struct regulator_dev * rdev,unsigned int mode)475 static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
476 {
477 int value;
478 struct regmap *regmap = rdev_get_regmap(rdev);
479
480 switch (mode) {
481 case REGULATOR_MODE_NORMAL:
482 value = STPMIC1_BUCK_MODE_NORMAL;
483 break;
484 case REGULATOR_MODE_STANDBY:
485 value = STPMIC1_BUCK_MODE_LP;
486 break;
487 default:
488 return -EINVAL;
489 }
490
491 return regmap_update_bits(regmap, rdev->desc->enable_reg,
492 STPMIC1_BUCK_MODE_LP, value);
493 }
494
stpmic1_set_icc(struct regulator_dev * rdev,int lim,int severity,bool enable)495 static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity,
496 bool enable)
497 {
498 struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev);
499 struct regmap *regmap = rdev_get_regmap(rdev);
500
501 /*
502 * The code seems like one bit in a register controls whether OCP is
503 * enabled. So we might be able to turn it off here is if that
504 * was requested. I won't support this because I don't have the HW.
505 * Feel free to try and implement if you have the HW and need kernel
506 * to disable this.
507 *
508 * Also, I don't know if limit can be configured or if we support
509 * error/warning instead of protect. So I just keep existing logic
510 * and assume no.
511 */
512 if (lim || severity != REGULATOR_SEVERITY_PROT || !enable)
513 return -EINVAL;
514
515 /* enable switch off in case of over current */
516 return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask,
517 cfg->icc_mask);
518 }
519
stpmic1_curlim_irq_handler(int irq,void * data)520 static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
521 {
522 struct regulator_dev *rdev = (struct regulator_dev *)data;
523
524 /* Send an overcurrent notification */
525 regulator_notifier_call_chain(rdev,
526 REGULATOR_EVENT_OVER_CURRENT,
527 NULL);
528
529 return IRQ_HANDLED;
530 }
531
532 #define MATCH(_name, _id) \
533 [STPMIC1_##_id] = { \
534 .name = #_name, \
535 .desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
536 }
537
538 static struct of_regulator_match stpmic1_matches[] = {
539 MATCH(buck1, BUCK1),
540 MATCH(buck2, BUCK2),
541 MATCH(buck3, BUCK3),
542 MATCH(buck4, BUCK4),
543 MATCH(ldo1, LDO1),
544 MATCH(ldo2, LDO2),
545 MATCH(ldo3, LDO3),
546 MATCH(ldo4, LDO4),
547 MATCH(ldo5, LDO5),
548 MATCH(ldo6, LDO6),
549 MATCH(vref_ddr, VREF_DDR),
550 MATCH(boost, BOOST),
551 MATCH(pwr_sw1, VBUS_OTG),
552 MATCH(pwr_sw2, SW_OUT),
553 };
554
stpmic1_regulator_register(struct platform_device * pdev,int id,struct of_regulator_match * match,const struct stpmic1_regulator_cfg * cfg)555 static int stpmic1_regulator_register(struct platform_device *pdev, int id,
556 struct of_regulator_match *match,
557 const struct stpmic1_regulator_cfg *cfg)
558 {
559 struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent);
560 struct regulator_dev *rdev;
561 struct regulator_config config = {};
562 int ret = 0;
563 int irq;
564
565 config.dev = &pdev->dev;
566 config.init_data = match->init_data;
567 config.of_node = match->of_node;
568 config.regmap = pmic_dev->regmap;
569 config.driver_data = (void *)cfg;
570
571 rdev = devm_regulator_register(&pdev->dev, &cfg->desc, &config);
572 if (IS_ERR(rdev)) {
573 dev_err(&pdev->dev, "failed to register %s regulator\n",
574 cfg->desc.name);
575 return PTR_ERR(rdev);
576 }
577
578 /* set mask reset */
579 if (of_property_read_bool(config.of_node, "st,mask-reset") &&
580 cfg->mask_reset_reg != 0) {
581 ret = regmap_update_bits(pmic_dev->regmap,
582 cfg->mask_reset_reg,
583 cfg->mask_reset_mask,
584 cfg->mask_reset_mask);
585 if (ret) {
586 dev_err(&pdev->dev, "set mask reset failed\n");
587 return ret;
588 }
589 }
590
591 /* setup an irq handler for over-current detection */
592 irq = of_irq_get(config.of_node, 0);
593 if (irq > 0) {
594 ret = devm_request_threaded_irq(&pdev->dev,
595 irq, NULL,
596 stpmic1_curlim_irq_handler,
597 IRQF_ONESHOT | IRQF_SHARED,
598 pdev->name, rdev);
599 if (ret) {
600 dev_err(&pdev->dev, "Request IRQ failed\n");
601 return ret;
602 }
603 }
604 return 0;
605 }
606
stpmic1_regulator_probe(struct platform_device * pdev)607 static int stpmic1_regulator_probe(struct platform_device *pdev)
608 {
609 int i, ret;
610
611 ret = of_regulator_match(&pdev->dev, pdev->dev.of_node, stpmic1_matches,
612 ARRAY_SIZE(stpmic1_matches));
613 if (ret < 0) {
614 dev_err(&pdev->dev,
615 "Error in PMIC regulator device tree node");
616 return ret;
617 }
618
619 for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
620 ret = stpmic1_regulator_register(pdev, i, &stpmic1_matches[i],
621 &stpmic1_regulator_cfgs[i]);
622 if (ret < 0)
623 return ret;
624 }
625
626 dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n");
627
628 return 0;
629 }
630
631 static const struct of_device_id of_pmic_regulator_match[] = {
632 { .compatible = "st,stpmic1-regulators" },
633 { },
634 };
635
636 MODULE_DEVICE_TABLE(of, of_pmic_regulator_match);
637
638 static struct platform_driver stpmic1_regulator_driver = {
639 .driver = {
640 .name = "stpmic1-regulator",
641 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
642 .of_match_table = of_match_ptr(of_pmic_regulator_match),
643 },
644 .probe = stpmic1_regulator_probe,
645 };
646
647 module_platform_driver(stpmic1_regulator_driver);
648
649 MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver");
650 MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
651 MODULE_LICENSE("GPL v2");
652