xref: /linux/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h (revision 9a87ffc99ec8eb8d35eed7c4f816d75f5cc9662e)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2017, The Linux Foundation. All rights reserved.
4  */
5 
6 #ifndef QCOM_PHY_QMP_PCS_V2_H_
7 #define QCOM_PHY_QMP_PCS_V2_H_
8 
9 /* Only for QMP V2 PHY - PCS registers */
10 #define QPHY_V2_PCS_SW_RESET				0x000
11 #define QPHY_V2_PCS_POWER_DOWN_CONTROL			0x004
12 #define QPHY_V2_PCS_START_CONTROL			0x008
13 #define QPHY_V2_PCS_TXDEEMPH_M6DB_V0			0x024
14 #define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0			0x028
15 #define QPHY_V2_PCS_ENDPOINT_REFCLK_DRIVE		0x054
16 #define QPHY_V2_PCS_RX_IDLE_DTCT_CNTRL			0x058
17 #define QPHY_V2_PCS_POWER_STATE_CONFIG1			0x060
18 #define QPHY_V2_PCS_POWER_STATE_CONFIG2			0x064
19 #define QPHY_V2_PCS_POWER_STATE_CONFIG4			0x06c
20 #define QPHY_V2_PCS_LOCK_DETECT_CONFIG1			0x080
21 #define QPHY_V2_PCS_LOCK_DETECT_CONFIG2			0x084
22 #define QPHY_V2_PCS_LOCK_DETECT_CONFIG3			0x088
23 #define QPHY_V2_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x0a0
24 #define QPHY_V2_PCS_LP_WAKEUP_DLY_TIME_AUXCLK		0x0a4
25 #define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME		0x0a8
26 #define QPHY_V2_PCS_FLL_CNTRL1				0x0c0
27 #define QPHY_V2_PCS_FLL_CNTRL2				0x0c4
28 #define QPHY_V2_PCS_FLL_CNT_VAL_L			0x0c8
29 #define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL			0x0cc
30 #define QPHY_V2_PCS_FLL_MAN_CODE			0x0d0
31 #define QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL		0x0d4
32 #define QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0d8
33 #define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS		0x178
34 #define QPHY_V2_PCS_USB_PCS_STATUS			0x17c /* USB */
35 #define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB	0x1a8
36 #define QPHY_V2_PCS_OSC_DTCT_ACTIONS			0x1ac
37 #define QPHY_V2_PCS_RX_SIGDET_LVL			0x1d8
38 #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
39 #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
40 
41 #define QPHY_V2_PCS_PCI_PCS_STATUS			0x174 /* PCI */
42 
43 #endif
44