xref: /titanic_44/usr/src/uts/common/sys/scsi/adapters/pmcs/pmcs_reg.h (revision 658280b6253b61dbb155f43d0e3cbcffa85ccb90)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*
22  * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
23  */
24 /*
25  * PMC 8x6G register definitions
26  */
27 #ifndef	_PMCS_REG_H
28 #define	_PMCS_REG_H
29 #ifdef	__cplusplus
30 extern "C" {
31 #endif
32 
33 /*
34  * PCI Constants
35  */
36 #define	PMCS_VENDOR_ID	0x11F8
37 #define	PMCS_DEVICE_ID	0x8001
38 
39 #define	PMCS_PM8001_REV_A	0
40 #define	PMCS_PM8001_REV_B	1
41 #define	PMCS_PM8001_REV_C	2
42 
43 #define	PMCS_REGSET_0		1
44 #define	PMCS_REGSET_1		2
45 #define	PMCS_REGSET_2		3
46 #define	PMCS_REGSET_3		4
47 
48 
49 /*
50  * PCIe BARs - 4 64KB memory regions
51  *
52  *	BAR0-1	64KiB
53  *	BAR2-3	64KiB
54  *	BAR4	64KiB
55  *	BAR5	64KiB
56  */
57 
58 /*
59  * The PMC 8x6G registers are defined by BARs in PCIe space.
60  *
61  * Four memory region BARS are used.
62  *
63  * The first is for the Messaging Unit.
64  *
65  * The second 64KiB region contains the PCS/PMA registers and some of the
66  * Top-Level registers.
67  *
68  * The third 64KiB region is a 64KiB window on the rest of the chip registers
69  * which can be shifted by writing a register in the second region.
70  *
71  * The fourth 64KiB region is for the message passing area.
72  */
73 
74 /*
75  * Messaging Unit Register Offsets
76  */
77 #define	PMCS_MSGU_IBDB		0x04	/* Inbound Doorbell */
78 #define	PMCS_MSGU_IBDB_CLEAR	0x20	/* InBound Doorbell Clear */
79 #define	PMCS_MSGU_OBDB		0x3c	/* OutBound Doorbell */
80 #define	PMCS_MSGU_OBDB_CLEAR	0x40	/* OutBound Doorbell Clear */
81 #define	PMCS_MSGU_SCRATCH0	0x44	/* Scratchpad 0 */
82 #define	PMCS_MSGU_SCRATCH1	0x48	/* Scratchpad 1 */
83 #define	PMCS_MSGU_SCRATCH2	0x4C	/* Scratchpad 2 */
84 #define	PMCS_MSGU_SCRATCH3	0x50	/* Scratchpad 3 */
85 #define	PMCS_MSGU_HOST_SCRATCH0	0x54	/* Host Scratchpad 0 */
86 #define	PMCS_MSGU_HOST_SCRATCH1	0x58	/* Host Scratchpad 1 */
87 #define	PMCS_MSGU_HOST_SCRATCH2	0x5C	/* Host Scratchpad 2 */
88 #define	PMCS_MSGU_HOST_SCRATCH3	0x60	/* Host Scratchpad 3 */
89 #define	PMCS_MSGU_HOST_SCRATCH4	0x64	/* Host Scratchpad 4 */
90 #define	PMCS_MSGU_HOST_SCRATCH5	0x68	/* Host Scratchpad 5 */
91 #define	PMCS_MSGU_HOST_SCRATCH6	0x6C	/* Host Scratchpad 6 */
92 #define	PMCS_MSGU_HOST_SCRATCH7	0x70	/* Host Scratchpad 7 */
93 #define	PMCS_MSGU_OBDB_MASK	0x74	/* Outbound Doorbell Mask */
94 
95 /*
96  * Inbound Doorbell and Doorbell Clear Definitions
97  * NB: The Doorbell Clear register is only used on RevA/8000 parts.
98  */
99 #define	PMCS_MSGU_IBDB_MPIIU	0x08	/* Initiate Unfreeze */
100 #define	PMCS_MSGU_IBDB_MPIIF	0x04	/* Initiate Freeze */
101 #define	PMCS_MSGU_IBDB_MPICTU	0x02	/* Initiate MPI Termination */
102 #define	PMCS_MSGU_IBDB_MPIINI	0x01	/* Initiate MPI */
103 
104 /*
105  * Outbound Doorbell and Doorbell Clear Register
106  *
107  * The Doorbell Clear register is only used on RevA/8000 parts.
108  *
109  * Each bit of the ODR is mapped 1-to-1 to a MSI or MSI-X vector
110  * table entry. There are 32 MSI and 16 MSI-X entries. The top
111  * 16 bits are mapped to the low 16 bits for MSI-X. For legacy
112  * INT-X, any bit will generate a host interrupt.
113  *
114  * Each bit in the Outbound Doorbell Clear is used to clear the
115  * corresponding bit in the ODR. For INT-X it also then deasserts
116  * any interrupt condition.
117  */
118 #define	PMCS_MSI_INTS	32
119 #define	PMCS_MSIX_INTS	16
120 
121 /*
122  * Scratchpad 0 Definitions
123  *
124  * When the AAP is ready state (see Scratchpad 1), bits 31:26 is the offset
125  * within PCIe space for another BAR that, when mapped, will point to a region
126  * that conains the MPI Configuration table (the offset of which is in bits
127  * 25:0 of this register)
128  *
129  * When the AAP is in error state, this register contains additional error
130  * information.
131  */
132 #define	PMCS_MSGU_MPI_BAR_SHIFT		26
133 #define	PMCS_MSGU_MPI_OFFSET_MASK	((1 << PMCS_MSGU_MPI_BAR_SHIFT) - 1)
134 
135 /*
136  * Scratchpad 1 Definitions
137  *
138  * The bottom two bits are the AAP state of the 8x6G.
139  *
140  * When the AAP is in error state, bits 31:10 contain the error indicator.
141  *
142  */
143 #define	PMCS_MSGU_AAP_STATE_MASK	0x03
144 #define	PMCS_MSGU_AAP_STATE_POR		0
145 #define	PMCS_MSGU_AAP_STATE_SOFT_RESET	1
146 #define	PMCS_MSGU_AAP_STATE_ERROR	2
147 #define	PMCS_MSGU_AAP_STATE_READY	3
148 #define	PMCS_MSGU_AAP_SFR_PROGRESS	0x04
149 #define	PMCS_MSGU_AAP_ERROR_MASK	0xfffffc00
150 
151 /*
152  * Scratchpad 2 Definitions
153  *
154  * Bits 31:10 contain error information if the IOP is in error state.
155  */
156 #define	PMCS_MSGU_IOP_STATE_MASK	0x03
157 #define	PMCS_MSGU_IOP_STATE_POR		0
158 #define	PMCS_MSGU_IOP_STATE_SOFT_RESET	1
159 #define	PMCS_MSGU_IOP_STATE_ERROR	2
160 #define	PMCS_MSGU_IOP_STATE_READY	3
161 
162 #define	PMCS_MSGU_HOST_SOFT_RESET_READY	0x04
163 #define	PMCS_MSGU_CPU_SOFT_RESET_READY	0x08
164 
165 /*
166  * Scratchpad 3 Definitions
167  *
168  * Contains additional error information if the IOP is in error state
169  * (see Scratchpad 2)
170  */
171 
172 /*
173  * Host Scratchpad 0
174  * Soft Reset Signature
175  */
176 #define	HST_SFT_RESET_SIG		0x252ACBCD
177 
178 /*
179  * Host Scratchpad 1
180  *
181  * This is a bit mask for freeze or unfreeze operations for IQs 0..31
182  */
183 
184 /*
185  * Host Scratchpad 2
186  *
187  * This is a bit mask for freeze or unfreeze operations for IQs 32..63
188  */
189 
190 /*
191  * Outbound Doorbell Mask Register
192  *
193  * Each bit set here masks bits and interrupt assertion for the corresponding
194  * bit (and vector) in the ODR.
195  */
196 
197 /*
198  * GSM Registers
199  */
200 #define	GSM_BASE_MASK				0x00ffff
201 #define	NMI_EN_VPE0_IOP				0x60418
202 #define	NMI_EN_VPE0_AAP1			0x70418
203 #define	RB6_ACCESS				0x6A80C0
204 #define	GSM_CFG_AND_RESET			0x700000
205 #define	RAM_ECC_DOUBLE_ERROR_INDICATOR		0x700018
206 #define	READ_ADR_PARITY_CHK_EN			0x700038
207 #define	WRITE_ADR_PARITY_CHK_EN			0x700040
208 #define	WRITE_DATA_PARITY_CHK_EN		0x700048
209 #define	READ_ADR_PARITY_ERROR_INDICATOR		0x700058
210 #define	WRITE_ADR_PARITY_ERROR_INDICATOR	0x700060
211 #define	WRITE_DATA_PARITY_ERROR_INDICATOR	0x700068
212 
213 #define	GSM_FLASH_BASE_UPPER			0x18
214 #define	GSM_FLASH_BASE				0x40000000
215 #define	GSM_FLASH_ILA				GSM_FLASH_BASE
216 #define	GSM_FLASH_IMG_FLAGS			(GSM_FLASH_BASE + 0x400000)
217 
218 #define	PMCS_IMG_FLAG_A				0x01
219 
220 /*
221  * GSM Share Memory, IO Status Table and Ring Buffer
222  */
223 #define	GSM_SM_BLKSZ				0x10000
224 #define	GSM_SM_BASE				0x400000
225 #define	IO_STATUS_TABLE_BASE			0x640000
226 #define	RING_BUF_STORAGE_0			0x680000
227 #define	RING_BUF_STORAGE_1			0x690000
228 #define	RING_BUF_PTR_ACC_BASE			0x6A0000
229 
230 #define	IO_STATUS_TABLE_BLKNM			0x4
231 #define	GSM_SM_BLKNM				0x10
232 #define	RING_BUF_PTR_OFF			0x1000
233 #define	RING_BUF_PTR_SIZE			0xFF8
234 #define	RING_BUF_ACC_OFF			0x8000
235 #define	RING_BUF_ACC_SIZE			0xFF8
236 
237 /*
238  * GSM Configuration and Reset Bits
239  */
240 #define	MST_XCBI_SW_RSTB		(1 << 14)
241 #define	COM_SLV_SW_RSTB			(1 << 13)
242 #define	QSSP_SW_RSTB			(1 << 12)
243 #define	RAAE_SW_RSTB			(1 << 11)
244 #define	RB_1_SW_RSTB			(1 << 9)
245 #define	SM_SW_RSTB			(1 << 8)
246 
247 #define	COHERENCY_GAP_SHIFT		4
248 #define	COHERENCY_GAP_MASK		0xf0
249 #define	COHERENCY_GAP_DEFAULT		(8 << COHERENCY_GAP_SHIFT)
250 
251 #define	COHERENCY_MODE			(1 << 3)
252 #define	RB_WSTRB_ERRCHK_EN		(1 << 2)
253 #define	RAAE_PORT2_EN			(1 << 1)
254 #define	GSM_WCI_MODE			(1 << 0)
255 #define	PMCS_SOFT_RESET_BITS		\
256 	(COM_SLV_SW_RSTB|QSSP_SW_RSTB|RAAE_SW_RSTB|RB_1_SW_RSTB|SM_SW_RSTB)
257 
258 #define	RB6_NMI_SIGNATURE		0x00001234
259 
260 /*
261  * PMCS PCI Configuration Registers
262  */
263 #define	PMCS_PCI_PMC			0x40
264 #define	PMCS_PCI_PMCSR			0x44
265 #define	PMCS_PCI_MSI			0x50
266 #define	PMCS_PCI_MAL			0x54
267 #define	PMCS_PCI_MAU			0x58
268 #define	PMCS_PCI_MD			0x5C
269 #define	PMCS_PCI_PCIE			0x70
270 #define	PMCS_PCI_DEV_CAP		0x74
271 #define	PMCS_PCI_DEV_CTRL		0x78
272 #define	PMCS_PCI_LINK_CAP		0x7C
273 #define	PMCS_PCI_LINK_CTRL		0x80
274 #define	PMCS_PCI_MSIX_CAP		0xAC
275 #define	PMCS_PCI_TBL_OFFSET		0xB0
276 #define	PMCS_PCI_PBA_OFFSET		0xB4
277 #define	PMCS_PCI_PCIE_CAP_HD		0x100
278 #define	PMCS_PCI_UE_STAT		0x104
279 #define	PMCS_PCI_UE_MASK		0x108
280 #define	PMCS_PCI_UE_SEV			0x10C
281 #define	PMCS_PCI_CE_STAT		0x110
282 #define	PMCS_PCI_CE_MASK		0x114
283 #define	PMCS_PCI_ADV_ERR_CTRL		0x118
284 #define	PMCS_PCI_HD_LOG_DW		0x11C
285 
286 /*
287  * Top Level Registers
288  */
289 /* these registers are in MEMBASE-III */
290 #define	PMCS_SPC_RESET			0x0
291 #define	PMCS_SPC_BOOT_STRAP		0x8
292 #define	PMCS_SPC_DEVICE_ID		0x20
293 #define	PMCS_DEVICE_REVISION		0x24
294 /* these registers are in MEMBASE-II */
295 #define	PMCS_EVENT_INT_ENABLE		0x3040
296 #define	PMCS_EVENT_INT_STAT		0x3044
297 #define	PMCS_ERROR_INT_ENABLE		0x3048
298 #define	PMCS_ERROR_INT_STAT		0x304C
299 #define	PMCS_AXI_TRANS			0x3258
300 #define	PMCS_AXI_TRANS_UPPER		0x3268
301 #define	PMCS_OBDB_AUTO_CLR		0x335C
302 #define	PMCS_INT_COALESCING_TIMER	0x33C0
303 #define	PMCS_INT_COALESCING_CONTROL	0x33C4
304 
305 
306 /*
307  * Chip Reset Register Bits (PMCS_SPC_RESET)
308  *
309  * NB: all bits are inverted. That is, the normal state is '1'.
310  * When '0' is set, the action is taken.
311  */
312 #define	PMCS_SPC_HARD_RESET		0x00
313 #define	PMCS_SPC_HARD_RESET_CLR		0xffffffff
314 
315 
316 #define	SW_DEVICE_RSTB			(1 << 31)
317 #define	PCIE_PC_SXCBI_ARESETN		(1 << 26)
318 #define	PMIC_CORE_RSTB			(1 << 25)
319 #define	PMIC_SXCBI_ARESETN		(1 << 24)
320 #define	LMS_SXCBI_ARESETN		(1 << 23)
321 #define	PCS_SXCBI_ARESETN		(1 << 22)
322 #define	PCIE_SFT_RSTB			(1 << 21)
323 #define	PCIE_PWR_RSTB			(1 << 20)
324 #define	PCIE_AL_SXCBI_ARESETN		(1 << 19)
325 #define	BDMA_SXCBI_ARESETN		(1 << 18)
326 #define	BDMA_CORE_RSTB			(1 << 17)
327 #define	DDR2_RSTB			(1 << 16)
328 #define	GSM_RSTB			(1 << 8)
329 #define	PCS_RSTB			(1 << 7)
330 #define	PCS_LM_RSTB			(1 << 6)
331 #define	PCS_AAP2_SS_RSTB		(1 << 5)
332 #define	PCS_AAP1_SS_RSTB		(1 << 4)
333 #define	PCS_IOP_SS_RSTB			(1 << 3)
334 #define	PCS_SPBC_RSTB			(1 << 2)
335 #define	RAAE_RSTB			(1 << 1)
336 #define	OSSP_RSTB			(1 << 0)
337 
338 
339 /*
340  * Timer Enables Register
341  */
342 #define	PMCS_TENABLE_WINDOW_OFFSET	0x30000
343 #define	PMCS_TENABLE_BASE		0x0209C
344 #define	PMCS_TENABLE_MULTIPLIER		0x04000
345 
346 /*
347  * Special register (MEMBASE-III) for Step 5.5 in soft reset sequence to set
348  * GPIO into tri-state mode (temporary workaround for 1.07.xx beta firmware)
349  */
350 #define	PMCS_GPIO_TRISTATE_MODE_ADDR	0x9010C
351 #define	PMCS_GPIO_TSMODE_BIT0		(1 << 0)
352 #define	PMCS_GPIO_TSMODE_BIT1		(1 << 1)
353 
354 /*
355  * SAS/SATA PHY Layer Registers
356  * These are in MEMBASE-III (i.e. in GSM space)
357  */
358 #define	OPEN_RETRY_INTERVAL(phy)	\
359 	(phy < 4) ? (0x330B4 + (0x4000 * (phy))) : \
360 	(0x430B4 + (0x4000 * (phy - 4)))
361 
362 #define	OPEN_RETRY_INTERVAL_DEF		20
363 #define	OPEN_RETRY_INTERVAL_MAX		0x7FFF
364 
365 /*
366  * Register Access Inline Functions
367  */
368 uint32_t pmcs_rd_msgunit(pmcs_hw_t *, uint32_t);
369 uint32_t pmcs_rd_gsm_reg(pmcs_hw_t *, uint8_t, uint32_t);
370 uint32_t pmcs_rd_topunit(pmcs_hw_t *, uint32_t);
371 uint32_t pmcs_rd_mpi_tbl(pmcs_hw_t *, uint32_t);
372 uint32_t pmcs_rd_gst_tbl(pmcs_hw_t *, uint32_t);
373 uint32_t pmcs_rd_iqc_tbl(pmcs_hw_t *, uint32_t);
374 uint32_t pmcs_rd_oqc_tbl(pmcs_hw_t *, uint32_t);
375 uint32_t pmcs_rd_iqci(pmcs_hw_t *, uint32_t);
376 uint32_t pmcs_rd_iqpi(pmcs_hw_t *, uint32_t);
377 uint32_t pmcs_rd_oqci(pmcs_hw_t *, uint32_t);
378 uint32_t pmcs_rd_oqpi(pmcs_hw_t *, uint32_t);
379 
380 void pmcs_wr_msgunit(pmcs_hw_t *, uint32_t, uint32_t);
381 void pmcs_wr_gsm_reg(pmcs_hw_t *, uint32_t, uint32_t);
382 void pmcs_wr_topunit(pmcs_hw_t *, uint32_t, uint32_t);
383 void pmcs_wr_mpi_tbl(pmcs_hw_t *, uint32_t, uint32_t);
384 void pmcs_wr_gst_tbl(pmcs_hw_t *, uint32_t, uint32_t);
385 void pmcs_wr_iqc_tbl(pmcs_hw_t *, uint32_t, uint32_t);
386 void pmcs_wr_oqc_tbl(pmcs_hw_t *, uint32_t, uint32_t);
387 void pmcs_wr_iqci(pmcs_hw_t *, uint32_t, uint32_t);
388 void pmcs_wr_iqpi(pmcs_hw_t *, uint32_t, uint32_t);
389 void pmcs_wr_oqci(pmcs_hw_t *, uint32_t, uint32_t);
390 void pmcs_wr_oqpi(pmcs_hw_t *, uint32_t, uint32_t);
391 
392 #ifdef	__cplusplus
393 }
394 #endif
395 #endif	/* _PMCS_REG_H */
396