1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Cristian Birsan <cristian.birsan@microchip.com>
4 * Joshua Henderson <joshua.henderson@microchip.com>
5 * Copyright (C) 2016 Microchip Technology Inc. All rights reserved.
6 */
7 #include <linux/kernel.h>
8 #include <linux/module.h>
9 #include <linux/interrupt.h>
10 #include <linux/irqdomain.h>
11 #include <linux/of_address.h>
12 #include <linux/slab.h>
13 #include <linux/io.h>
14 #include <linux/irqchip.h>
15 #include <linux/irq.h>
16
17 #include <asm/irq.h>
18 #include <asm/traps.h>
19 #include <asm/mach-pic32/pic32.h>
20
21 #define REG_INTCON 0x0000
22 #define REG_INTSTAT 0x0020
23 #define REG_IFS_OFFSET 0x0040
24 #define REG_IEC_OFFSET 0x00C0
25 #define REG_IPC_OFFSET 0x0140
26 #define REG_OFF_OFFSET 0x0540
27
28 #define MAJPRI_MASK 0x07
29 #define SUBPRI_MASK 0x03
30 #define PRIORITY_MASK 0x1F
31
32 #define PIC32_INT_PRI(pri, subpri) \
33 ((((pri) & MAJPRI_MASK) << 2) | ((subpri) & SUBPRI_MASK))
34
35 struct evic_chip_data {
36 u32 irq_types[NR_IRQS];
37 u32 ext_irqs[8];
38 };
39
40 static struct irq_domain *evic_irq_domain;
41 static void __iomem *evic_base;
42
plat_irq_dispatch(void)43 asmlinkage void __weak plat_irq_dispatch(void)
44 {
45 unsigned int hwirq;
46
47 hwirq = readl(evic_base + REG_INTSTAT) & 0xFF;
48 do_domain_IRQ(evic_irq_domain, hwirq);
49 }
50
irqd_to_priv(struct irq_data * data)51 static struct evic_chip_data *irqd_to_priv(struct irq_data *data)
52 {
53 return (struct evic_chip_data *)data->domain->host_data;
54 }
55
pic32_set_ext_polarity(int bit,u32 type)56 static int pic32_set_ext_polarity(int bit, u32 type)
57 {
58 /*
59 * External interrupts can be either edge rising or edge falling,
60 * but not both.
61 */
62 switch (type) {
63 case IRQ_TYPE_EDGE_RISING:
64 writel(BIT(bit), evic_base + PIC32_SET(REG_INTCON));
65 break;
66 case IRQ_TYPE_EDGE_FALLING:
67 writel(BIT(bit), evic_base + PIC32_CLR(REG_INTCON));
68 break;
69 default:
70 return -EINVAL;
71 }
72
73 return 0;
74 }
75
pic32_set_type_edge(struct irq_data * data,unsigned int flow_type)76 static int pic32_set_type_edge(struct irq_data *data,
77 unsigned int flow_type)
78 {
79 struct evic_chip_data *priv = irqd_to_priv(data);
80 int ret;
81 int i;
82
83 if (!(flow_type & IRQ_TYPE_EDGE_BOTH))
84 return -EBADR;
85
86 /* set polarity for external interrupts only */
87 for (i = 0; i < ARRAY_SIZE(priv->ext_irqs); i++) {
88 if (priv->ext_irqs[i] == data->hwirq) {
89 ret = pic32_set_ext_polarity(i, flow_type);
90 if (ret)
91 return ret;
92 }
93 }
94
95 irqd_set_trigger_type(data, flow_type);
96
97 return IRQ_SET_MASK_OK;
98 }
99
pic32_bind_evic_interrupt(int irq,int set)100 static void pic32_bind_evic_interrupt(int irq, int set)
101 {
102 writel(set, evic_base + REG_OFF_OFFSET + irq * 4);
103 }
104
pic32_set_irq_priority(int irq,int priority)105 static void pic32_set_irq_priority(int irq, int priority)
106 {
107 u32 reg, shift;
108
109 reg = irq / 4;
110 shift = (irq % 4) * 8;
111
112 writel(PRIORITY_MASK << shift,
113 evic_base + PIC32_CLR(REG_IPC_OFFSET + reg * 0x10));
114 writel(priority << shift,
115 evic_base + PIC32_SET(REG_IPC_OFFSET + reg * 0x10));
116 }
117
118 #define IRQ_REG_MASK(_hwirq, _reg, _mask) \
119 do { \
120 _reg = _hwirq / 32; \
121 _mask = 1 << (_hwirq % 32); \
122 } while (0)
123
pic32_irq_domain_map(struct irq_domain * d,unsigned int virq,irq_hw_number_t hw)124 static int pic32_irq_domain_map(struct irq_domain *d, unsigned int virq,
125 irq_hw_number_t hw)
126 {
127 struct evic_chip_data *priv = d->host_data;
128 struct irq_data *data;
129 int ret;
130 u32 iecclr, ifsclr;
131 u32 reg, mask;
132
133 ret = irq_map_generic_chip(d, virq, hw);
134 if (ret)
135 return ret;
136
137 /*
138 * Piggyback on xlate function to move to an alternate chip as necessary
139 * at time of mapping instead of allowing the flow handler/chip to be
140 * changed later. This requires all interrupts to be configured through
141 * DT.
142 */
143 if (priv->irq_types[hw] & IRQ_TYPE_SENSE_MASK) {
144 data = irq_domain_get_irq_data(d, virq);
145 irqd_set_trigger_type(data, priv->irq_types[hw]);
146 irq_setup_alt_chip(data, priv->irq_types[hw]);
147 }
148
149 IRQ_REG_MASK(hw, reg, mask);
150
151 iecclr = PIC32_CLR(REG_IEC_OFFSET + reg * 0x10);
152 ifsclr = PIC32_CLR(REG_IFS_OFFSET + reg * 0x10);
153
154 /* mask and clear flag */
155 writel(mask, evic_base + iecclr);
156 writel(mask, evic_base + ifsclr);
157
158 /* default priority is required */
159 pic32_set_irq_priority(hw, PIC32_INT_PRI(2, 0));
160
161 return ret;
162 }
163
pic32_irq_domain_xlate(struct irq_domain * d,struct device_node * ctrlr,const u32 * intspec,unsigned int intsize,irq_hw_number_t * out_hwirq,unsigned int * out_type)164 static int pic32_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
165 const u32 *intspec, unsigned int intsize,
166 irq_hw_number_t *out_hwirq, unsigned int *out_type)
167 {
168 struct evic_chip_data *priv = d->host_data;
169
170 if (WARN_ON(intsize < 2))
171 return -EINVAL;
172
173 if (WARN_ON(intspec[0] >= NR_IRQS))
174 return -EINVAL;
175
176 *out_hwirq = intspec[0];
177 *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
178
179 priv->irq_types[intspec[0]] = intspec[1] & IRQ_TYPE_SENSE_MASK;
180
181 return 0;
182 }
183
184 static const struct irq_domain_ops pic32_irq_domain_ops = {
185 .map = pic32_irq_domain_map,
186 .xlate = pic32_irq_domain_xlate,
187 };
188
pic32_ext_irq_of_init(struct irq_domain * domain)189 static void __init pic32_ext_irq_of_init(struct irq_domain *domain)
190 {
191 struct device_node *node = irq_domain_get_of_node(domain);
192 struct evic_chip_data *priv = domain->host_data;
193 u32 hwirq;
194 int i = 0;
195 const char *pname = "microchip,external-irqs";
196
197 of_property_for_each_u32(node, pname, hwirq) {
198 if (i >= ARRAY_SIZE(priv->ext_irqs)) {
199 pr_warn("More than %d external irq, skip rest\n",
200 ARRAY_SIZE(priv->ext_irqs));
201 break;
202 }
203
204 priv->ext_irqs[i] = hwirq;
205 i++;
206 }
207 }
208
pic32_of_init(struct device_node * node,struct device_node * parent)209 static int __init pic32_of_init(struct device_node *node,
210 struct device_node *parent)
211 {
212 struct irq_chip_generic *gc;
213 struct evic_chip_data *priv;
214 unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
215 int nchips, ret;
216 int i;
217
218 nchips = DIV_ROUND_UP(NR_IRQS, 32);
219
220 evic_base = of_iomap(node, 0);
221 if (!evic_base)
222 return -ENOMEM;
223
224 priv = kcalloc(nchips, sizeof(*priv), GFP_KERNEL);
225 if (!priv) {
226 ret = -ENOMEM;
227 goto err_iounmap;
228 }
229
230 evic_irq_domain = irq_domain_add_linear(node, nchips * 32,
231 &pic32_irq_domain_ops,
232 priv);
233 if (!evic_irq_domain) {
234 ret = -ENOMEM;
235 goto err_free_priv;
236 }
237
238 /*
239 * The PIC32 EVIC has a linear list of irqs and the type of each
240 * irq is determined by the hardware peripheral the EVIC is arbitrating.
241 * These irq types are defined in the datasheet as "persistent" and
242 * "non-persistent" which are mapped here to level and edge
243 * respectively. To manage the different flow handler requirements of
244 * each irq type, different chip_types are used.
245 */
246 ret = irq_alloc_domain_generic_chips(evic_irq_domain, 32, 2,
247 "evic-level", handle_level_irq,
248 clr, 0, 0);
249 if (ret)
250 goto err_domain_remove;
251
252 board_bind_eic_interrupt = &pic32_bind_evic_interrupt;
253
254 for (i = 0; i < nchips; i++) {
255 u32 ifsclr = PIC32_CLR(REG_IFS_OFFSET + (i * 0x10));
256 u32 iec = REG_IEC_OFFSET + (i * 0x10);
257
258 gc = irq_get_domain_generic_chip(evic_irq_domain, i * 32);
259
260 gc->reg_base = evic_base;
261 gc->unused = 0;
262
263 /*
264 * Level/persistent interrupts have a special requirement that
265 * the condition generating the interrupt be cleared before the
266 * interrupt flag (ifs) can be cleared. chip.irq_eoi is used to
267 * complete the interrupt with an ack.
268 */
269 gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
270 gc->chip_types[0].handler = handle_fasteoi_irq;
271 gc->chip_types[0].regs.ack = ifsclr;
272 gc->chip_types[0].regs.mask = iec;
273 gc->chip_types[0].chip.name = "evic-level";
274 gc->chip_types[0].chip.irq_eoi = irq_gc_ack_set_bit;
275 gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
276 gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
277 gc->chip_types[0].chip.flags = IRQCHIP_SKIP_SET_WAKE;
278
279 /* Edge interrupts */
280 gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
281 gc->chip_types[1].handler = handle_edge_irq;
282 gc->chip_types[1].regs.ack = ifsclr;
283 gc->chip_types[1].regs.mask = iec;
284 gc->chip_types[1].chip.name = "evic-edge";
285 gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
286 gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
287 gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
288 gc->chip_types[1].chip.irq_set_type = pic32_set_type_edge;
289 gc->chip_types[1].chip.flags = IRQCHIP_SKIP_SET_WAKE;
290
291 gc->private = &priv[i];
292 }
293
294 irq_set_default_host(evic_irq_domain);
295
296 /*
297 * External interrupts have software configurable edge polarity. These
298 * interrupts are defined in DT allowing polarity to be configured only
299 * for these interrupts when requested.
300 */
301 pic32_ext_irq_of_init(evic_irq_domain);
302
303 return 0;
304
305 err_domain_remove:
306 irq_domain_remove(evic_irq_domain);
307
308 err_free_priv:
309 kfree(priv);
310
311 err_iounmap:
312 iounmap(evic_base);
313
314 return ret;
315 }
316
317 IRQCHIP_DECLARE(pic32_evic, "microchip,pic32mzda-evic", pic32_of_init);
318