1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
3 * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com>
4 *
5 * Derived from the PCAN project file driver/src/pcan_pci.c:
6 *
7 * Copyright (C) 2001-2006 PEAK System-Technik GmbH
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/interrupt.h>
13 #include <linux/netdevice.h>
14 #include <linux/delay.h>
15 #include <linux/pci.h>
16 #include <linux/io.h>
17 #include <linux/can.h>
18 #include <linux/can/dev.h>
19
20 #include "peak_canfd_user.h"
21
22 MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
23 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards");
24 MODULE_LICENSE("GPL v2");
25
26 #define PCIEFD_DRV_NAME "peak_pciefd"
27
28 #define PEAK_PCI_VENDOR_ID 0x001c /* The PCI device and vendor IDs */
29 #define PEAK_PCIEFD_ID 0x0013 /* for PCIe slot cards */
30 #define PCAN_CPCIEFD_ID 0x0014 /* for Compact-PCI Serial slot cards */
31 #define PCAN_PCIE104FD_ID 0x0017 /* for PCIe-104 Express slot cards */
32 #define PCAN_MINIPCIEFD_ID 0x0018 /* for mini-PCIe slot cards */
33 #define PCAN_PCIEFD_OEM_ID 0x0019 /* for PCIe slot OEM cards */
34 #define PCAN_M2_ID 0x001a /* for M2 slot cards */
35
36 /* PEAK PCIe board access description */
37 #define PCIEFD_BAR0_SIZE (64 * 1024)
38 #define PCIEFD_RX_DMA_SIZE (4 * 1024)
39 #define PCIEFD_TX_DMA_SIZE (4 * 1024)
40
41 #define PCIEFD_TX_PAGE_SIZE (2 * 1024)
42
43 /* System Control Registers */
44 #define PCIEFD_REG_SYS_CTL_SET 0x0000 /* set bits */
45 #define PCIEFD_REG_SYS_CTL_CLR 0x0004 /* clear bits */
46
47 /* Version info registers */
48 #define PCIEFD_REG_SYS_VER1 0x0040 /* version reg #1 */
49 #define PCIEFD_REG_SYS_VER2 0x0044 /* version reg #2 */
50
51 #define PCIEFD_FW_VERSION(x, y, z) (((u32)(x) << 24) | \
52 ((u32)(y) << 16) | \
53 ((u32)(z) << 8))
54
55 /* System Control Registers Bits */
56 #define PCIEFD_SYS_CTL_TS_RST 0x00000001 /* timestamp clock */
57 #define PCIEFD_SYS_CTL_CLK_EN 0x00000002 /* system clock */
58
59 /* CAN-FD channel addresses */
60 #define PCIEFD_CANX_OFF(c) (((c) + 1) * 0x1000)
61
62 #define PCIEFD_ECHO_SKB_MAX PCANFD_ECHO_SKB_DEF
63
64 /* CAN-FD channel registers */
65 #define PCIEFD_REG_CAN_MISC 0x0000 /* Misc. control */
66 #define PCIEFD_REG_CAN_CLK_SEL 0x0008 /* Clock selector */
67 #define PCIEFD_REG_CAN_CMD_PORT_L 0x0010 /* 64-bits command port */
68 #define PCIEFD_REG_CAN_CMD_PORT_H 0x0014
69 #define PCIEFD_REG_CAN_TX_REQ_ACC 0x0020 /* Tx request accumulator */
70 #define PCIEFD_REG_CAN_TX_CTL_SET 0x0030 /* Tx control set register */
71 #define PCIEFD_REG_CAN_TX_CTL_CLR 0x0038 /* Tx control clear register */
72 #define PCIEFD_REG_CAN_TX_DMA_ADDR_L 0x0040 /* 64-bits addr for Tx DMA */
73 #define PCIEFD_REG_CAN_TX_DMA_ADDR_H 0x0044
74 #define PCIEFD_REG_CAN_RX_CTL_SET 0x0050 /* Rx control set register */
75 #define PCIEFD_REG_CAN_RX_CTL_CLR 0x0058 /* Rx control clear register */
76 #define PCIEFD_REG_CAN_RX_CTL_WRT 0x0060 /* Rx control write register */
77 #define PCIEFD_REG_CAN_RX_CTL_ACK 0x0068 /* Rx control ACK register */
78 #define PCIEFD_REG_CAN_RX_DMA_ADDR_L 0x0070 /* 64-bits addr for Rx DMA */
79 #define PCIEFD_REG_CAN_RX_DMA_ADDR_H 0x0074
80
81 /* CAN-FD channel misc register bits */
82 #define CANFD_MISC_TS_RST 0x00000001 /* timestamp cnt rst */
83
84 /* CAN-FD channel Clock SELector Source & DIVider */
85 #define CANFD_CLK_SEL_DIV_MASK 0x00000007
86 #define CANFD_CLK_SEL_DIV_60MHZ 0x00000000 /* SRC=240MHz only */
87 #define CANFD_CLK_SEL_DIV_40MHZ 0x00000001 /* SRC=240MHz only */
88 #define CANFD_CLK_SEL_DIV_30MHZ 0x00000002 /* SRC=240MHz only */
89 #define CANFD_CLK_SEL_DIV_24MHZ 0x00000003 /* SRC=240MHz only */
90 #define CANFD_CLK_SEL_DIV_20MHZ 0x00000004 /* SRC=240MHz only */
91
92 #define CANFD_CLK_SEL_SRC_MASK 0x00000008 /* 0=80MHz, 1=240MHz */
93 #define CANFD_CLK_SEL_SRC_240MHZ 0x00000008
94 #define CANFD_CLK_SEL_SRC_80MHZ (~CANFD_CLK_SEL_SRC_240MHZ & \
95 CANFD_CLK_SEL_SRC_MASK)
96
97 #define CANFD_CLK_SEL_20MHZ (CANFD_CLK_SEL_SRC_240MHZ |\
98 CANFD_CLK_SEL_DIV_20MHZ)
99 #define CANFD_CLK_SEL_24MHZ (CANFD_CLK_SEL_SRC_240MHZ |\
100 CANFD_CLK_SEL_DIV_24MHZ)
101 #define CANFD_CLK_SEL_30MHZ (CANFD_CLK_SEL_SRC_240MHZ |\
102 CANFD_CLK_SEL_DIV_30MHZ)
103 #define CANFD_CLK_SEL_40MHZ (CANFD_CLK_SEL_SRC_240MHZ |\
104 CANFD_CLK_SEL_DIV_40MHZ)
105 #define CANFD_CLK_SEL_60MHZ (CANFD_CLK_SEL_SRC_240MHZ |\
106 CANFD_CLK_SEL_DIV_60MHZ)
107 #define CANFD_CLK_SEL_80MHZ (CANFD_CLK_SEL_SRC_80MHZ)
108
109 /* CAN-FD channel Rx/Tx control register bits */
110 #define CANFD_CTL_UNC_BIT 0x00010000 /* Uncached DMA mem */
111 #define CANFD_CTL_RST_BIT 0x00020000 /* reset DMA action */
112 #define CANFD_CTL_IEN_BIT 0x00040000 /* IRQ enable */
113
114 /* Rx IRQ Count and Time Limits */
115 #define CANFD_CTL_IRQ_CL_DEF 16 /* Rx msg max nb per IRQ in Rx DMA */
116 #define CANFD_CTL_IRQ_TL_DEF 10 /* Time before IRQ if < CL (x100 µs) */
117
118 /* Tx anticipation window (link logical address should be aligned on 2K
119 * boundary)
120 */
121 #define PCIEFD_TX_PAGE_COUNT (PCIEFD_TX_DMA_SIZE / PCIEFD_TX_PAGE_SIZE)
122
123 #define CANFD_MSG_LNK_TX 0x1001 /* Tx msgs link */
124
125 /* 32-bits IRQ status fields, heading Rx DMA area */
pciefd_irq_tag(u32 irq_status)126 static inline int pciefd_irq_tag(u32 irq_status)
127 {
128 return irq_status & 0x0000000f;
129 }
130
pciefd_irq_rx_cnt(u32 irq_status)131 static inline int pciefd_irq_rx_cnt(u32 irq_status)
132 {
133 return (irq_status & 0x000007f0) >> 4;
134 }
135
pciefd_irq_is_lnk(u32 irq_status)136 static inline int pciefd_irq_is_lnk(u32 irq_status)
137 {
138 return irq_status & 0x00010000;
139 }
140
141 /* Rx record */
142 struct pciefd_rx_dma {
143 __le32 irq_status;
144 __le32 sys_time_low;
145 __le32 sys_time_high;
146 struct pucan_rx_msg msg[];
147 } __packed __aligned(4);
148
149 /* Tx Link record */
150 struct pciefd_tx_link {
151 __le16 size;
152 __le16 type;
153 __le32 laddr_lo;
154 __le32 laddr_hi;
155 } __packed __aligned(4);
156
157 /* Tx page descriptor */
158 struct pciefd_page {
159 void *vbase; /* page virtual address */
160 dma_addr_t lbase; /* page logical address */
161 u32 offset;
162 u32 size;
163 };
164
165 /* CAN-FD channel object */
166 struct pciefd_board;
167 struct pciefd_can {
168 struct peak_canfd_priv ucan; /* must be the first member */
169 void __iomem *reg_base; /* channel config base addr */
170 struct pciefd_board *board; /* reverse link */
171
172 struct pucan_command pucan_cmd; /* command buffer */
173
174 dma_addr_t rx_dma_laddr; /* DMA virtual and logical addr */
175 void *rx_dma_vaddr; /* for Rx and Tx areas */
176 dma_addr_t tx_dma_laddr;
177 void *tx_dma_vaddr;
178
179 struct pciefd_page tx_pages[PCIEFD_TX_PAGE_COUNT];
180 u16 tx_pages_free; /* free Tx pages counter */
181 u16 tx_page_index; /* current page used for Tx */
182 spinlock_t tx_lock;
183
184 u32 irq_status;
185 u32 irq_tag; /* next irq tag */
186 };
187
188 /* PEAK-PCIe FD board object */
189 struct pciefd_board {
190 void __iomem *reg_base;
191 struct pci_dev *pci_dev;
192 int can_count;
193 spinlock_t cmd_lock; /* 64-bits cmds must be atomic */
194 struct pciefd_can *can[]; /* array of network devices */
195 };
196
197 /* supported device ids. */
198 static const struct pci_device_id peak_pciefd_tbl[] = {
199 {PEAK_PCI_VENDOR_ID, PEAK_PCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
200 {PEAK_PCI_VENDOR_ID, PCAN_CPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
201 {PEAK_PCI_VENDOR_ID, PCAN_PCIE104FD_ID, PCI_ANY_ID, PCI_ANY_ID,},
202 {PEAK_PCI_VENDOR_ID, PCAN_MINIPCIEFD_ID, PCI_ANY_ID, PCI_ANY_ID,},
203 {PEAK_PCI_VENDOR_ID, PCAN_PCIEFD_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,},
204 {PEAK_PCI_VENDOR_ID, PCAN_M2_ID, PCI_ANY_ID, PCI_ANY_ID,},
205 {0,}
206 };
207
208 MODULE_DEVICE_TABLE(pci, peak_pciefd_tbl);
209
210 /* read a 32 bits value from a SYS block register */
pciefd_sys_readreg(const struct pciefd_board * priv,u16 reg)211 static inline u32 pciefd_sys_readreg(const struct pciefd_board *priv, u16 reg)
212 {
213 return readl(priv->reg_base + reg);
214 }
215
216 /* write a 32 bits value into a SYS block register */
pciefd_sys_writereg(const struct pciefd_board * priv,u32 val,u16 reg)217 static inline void pciefd_sys_writereg(const struct pciefd_board *priv,
218 u32 val, u16 reg)
219 {
220 writel(val, priv->reg_base + reg);
221 }
222
223 /* read a 32 bits value from CAN-FD block register */
pciefd_can_readreg(const struct pciefd_can * priv,u16 reg)224 static inline u32 pciefd_can_readreg(const struct pciefd_can *priv, u16 reg)
225 {
226 return readl(priv->reg_base + reg);
227 }
228
229 /* write a 32 bits value into a CAN-FD block register */
pciefd_can_writereg(const struct pciefd_can * priv,u32 val,u16 reg)230 static inline void pciefd_can_writereg(const struct pciefd_can *priv,
231 u32 val, u16 reg)
232 {
233 writel(val, priv->reg_base + reg);
234 }
235
236 /* give a channel logical Rx DMA address to the board */
pciefd_can_setup_rx_dma(struct pciefd_can * priv)237 static void pciefd_can_setup_rx_dma(struct pciefd_can *priv)
238 {
239 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
240 const u32 dma_addr_h = (u32)(priv->rx_dma_laddr >> 32);
241 #else
242 const u32 dma_addr_h = 0;
243 #endif
244
245 /* (DMA must be reset for Rx) */
246 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET);
247
248 /* write the logical address of the Rx DMA area for this channel */
249 pciefd_can_writereg(priv, (u32)priv->rx_dma_laddr,
250 PCIEFD_REG_CAN_RX_DMA_ADDR_L);
251 pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_RX_DMA_ADDR_H);
252
253 /* also indicates that Rx DMA is cacheable */
254 pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_RX_CTL_CLR);
255 }
256
257 /* clear channel logical Rx DMA address from the board */
pciefd_can_clear_rx_dma(struct pciefd_can * priv)258 static void pciefd_can_clear_rx_dma(struct pciefd_can *priv)
259 {
260 /* DMA must be reset for Rx */
261 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_RX_CTL_SET);
262
263 /* clear the logical address of the Rx DMA area for this channel */
264 pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_L);
265 pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_RX_DMA_ADDR_H);
266 }
267
268 /* give a channel logical Tx DMA address to the board */
pciefd_can_setup_tx_dma(struct pciefd_can * priv)269 static void pciefd_can_setup_tx_dma(struct pciefd_can *priv)
270 {
271 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
272 const u32 dma_addr_h = (u32)(priv->tx_dma_laddr >> 32);
273 #else
274 const u32 dma_addr_h = 0;
275 #endif
276
277 /* (DMA must be reset for Tx) */
278 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET);
279
280 /* write the logical address of the Tx DMA area for this channel */
281 pciefd_can_writereg(priv, (u32)priv->tx_dma_laddr,
282 PCIEFD_REG_CAN_TX_DMA_ADDR_L);
283 pciefd_can_writereg(priv, dma_addr_h, PCIEFD_REG_CAN_TX_DMA_ADDR_H);
284
285 /* also indicates that Tx DMA is cacheable */
286 pciefd_can_writereg(priv, CANFD_CTL_UNC_BIT, PCIEFD_REG_CAN_TX_CTL_CLR);
287 }
288
289 /* clear channel logical Tx DMA address from the board */
pciefd_can_clear_tx_dma(struct pciefd_can * priv)290 static void pciefd_can_clear_tx_dma(struct pciefd_can *priv)
291 {
292 /* DMA must be reset for Tx */
293 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_SET);
294
295 /* clear the logical address of the Tx DMA area for this channel */
296 pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_L);
297 pciefd_can_writereg(priv, 0, PCIEFD_REG_CAN_TX_DMA_ADDR_H);
298 }
299
pciefd_can_ack_rx_dma(struct pciefd_can * priv)300 static void pciefd_can_ack_rx_dma(struct pciefd_can *priv)
301 {
302 /* read value of current IRQ tag and inc it for next one */
303 priv->irq_tag = le32_to_cpu(*(__le32 *)priv->rx_dma_vaddr);
304 priv->irq_tag++;
305 priv->irq_tag &= 0xf;
306
307 /* write the next IRQ tag for this CAN */
308 pciefd_can_writereg(priv, priv->irq_tag, PCIEFD_REG_CAN_RX_CTL_ACK);
309 }
310
311 /* IRQ handler */
pciefd_irq_handler(int irq,void * arg)312 static irqreturn_t pciefd_irq_handler(int irq, void *arg)
313 {
314 struct pciefd_can *priv = arg;
315 struct pciefd_rx_dma *rx_dma = priv->rx_dma_vaddr;
316
317 /* INTA mode only to sync with PCIe transaction */
318 if (!pci_dev_msi_enabled(priv->board->pci_dev))
319 (void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1);
320
321 /* read IRQ status from the first 32-bits of the Rx DMA area */
322 priv->irq_status = le32_to_cpu(rx_dma->irq_status);
323
324 /* check if this (shared) IRQ is for this CAN */
325 if (pciefd_irq_tag(priv->irq_status) != priv->irq_tag)
326 return IRQ_NONE;
327
328 /* handle rx messages (if any) */
329 peak_canfd_handle_msgs_list(&priv->ucan,
330 rx_dma->msg,
331 pciefd_irq_rx_cnt(priv->irq_status));
332
333 /* handle tx link interrupt (if any) */
334 if (pciefd_irq_is_lnk(priv->irq_status)) {
335 unsigned long flags;
336
337 spin_lock_irqsave(&priv->tx_lock, flags);
338 priv->tx_pages_free++;
339 spin_unlock_irqrestore(&priv->tx_lock, flags);
340
341 /* wake producer up (only if enough room in echo_skb array) */
342 spin_lock_irqsave(&priv->ucan.echo_lock, flags);
343 if (!priv->ucan.can.echo_skb[priv->ucan.echo_idx])
344 netif_wake_queue(priv->ucan.ndev);
345
346 spin_unlock_irqrestore(&priv->ucan.echo_lock, flags);
347 }
348
349 /* re-enable Rx DMA transfer for this CAN */
350 pciefd_can_ack_rx_dma(priv);
351
352 return IRQ_HANDLED;
353 }
354
pciefd_enable_tx_path(struct peak_canfd_priv * ucan)355 static int pciefd_enable_tx_path(struct peak_canfd_priv *ucan)
356 {
357 struct pciefd_can *priv = (struct pciefd_can *)ucan;
358 int i;
359
360 /* initialize the Tx pages descriptors */
361 priv->tx_pages_free = PCIEFD_TX_PAGE_COUNT - 1;
362 priv->tx_page_index = 0;
363
364 priv->tx_pages[0].vbase = priv->tx_dma_vaddr;
365 priv->tx_pages[0].lbase = priv->tx_dma_laddr;
366
367 for (i = 0; i < PCIEFD_TX_PAGE_COUNT; i++) {
368 priv->tx_pages[i].offset = 0;
369 priv->tx_pages[i].size = PCIEFD_TX_PAGE_SIZE -
370 sizeof(struct pciefd_tx_link);
371 if (i) {
372 priv->tx_pages[i].vbase =
373 priv->tx_pages[i - 1].vbase +
374 PCIEFD_TX_PAGE_SIZE;
375 priv->tx_pages[i].lbase =
376 priv->tx_pages[i - 1].lbase +
377 PCIEFD_TX_PAGE_SIZE;
378 }
379 }
380
381 /* setup Tx DMA addresses into IP core */
382 pciefd_can_setup_tx_dma(priv);
383
384 /* start (TX_RST=0) Tx Path */
385 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT, PCIEFD_REG_CAN_TX_CTL_CLR);
386
387 return 0;
388 }
389
390 /* board specific CANFD command pre-processing */
pciefd_pre_cmd(struct peak_canfd_priv * ucan)391 static int pciefd_pre_cmd(struct peak_canfd_priv *ucan)
392 {
393 struct pciefd_can *priv = (struct pciefd_can *)ucan;
394 u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd);
395 int err;
396
397 /* pre-process command */
398 switch (cmd) {
399 case PUCAN_CMD_NORMAL_MODE:
400 case PUCAN_CMD_LISTEN_ONLY_MODE:
401
402 if (ucan->can.state == CAN_STATE_BUS_OFF)
403 break;
404
405 /* going into operational mode: setup IRQ handler */
406 err = request_irq(priv->ucan.ndev->irq,
407 pciefd_irq_handler,
408 IRQF_SHARED,
409 PCIEFD_DRV_NAME,
410 priv);
411 if (err)
412 return err;
413
414 /* setup Rx DMA address */
415 pciefd_can_setup_rx_dma(priv);
416
417 /* setup max count of msgs per IRQ */
418 pciefd_can_writereg(priv, (CANFD_CTL_IRQ_TL_DEF) << 8 |
419 CANFD_CTL_IRQ_CL_DEF,
420 PCIEFD_REG_CAN_RX_CTL_WRT);
421
422 /* clear DMA RST for Rx (Rx start) */
423 pciefd_can_writereg(priv, CANFD_CTL_RST_BIT,
424 PCIEFD_REG_CAN_RX_CTL_CLR);
425
426 /* reset timestamps */
427 pciefd_can_writereg(priv, !CANFD_MISC_TS_RST,
428 PCIEFD_REG_CAN_MISC);
429
430 /* do an initial ACK */
431 pciefd_can_ack_rx_dma(priv);
432
433 /* enable IRQ for this CAN after having set next irq_tag */
434 pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT,
435 PCIEFD_REG_CAN_RX_CTL_SET);
436
437 /* Tx path will be setup as soon as RX_BARRIER is received */
438 break;
439 default:
440 break;
441 }
442
443 return 0;
444 }
445
446 /* write a command */
pciefd_write_cmd(struct peak_canfd_priv * ucan)447 static int pciefd_write_cmd(struct peak_canfd_priv *ucan)
448 {
449 struct pciefd_can *priv = (struct pciefd_can *)ucan;
450 unsigned long flags;
451
452 /* 64-bits command is atomic */
453 spin_lock_irqsave(&priv->board->cmd_lock, flags);
454
455 pciefd_can_writereg(priv, *(u32 *)ucan->cmd_buffer,
456 PCIEFD_REG_CAN_CMD_PORT_L);
457 pciefd_can_writereg(priv, *(u32 *)(ucan->cmd_buffer + 4),
458 PCIEFD_REG_CAN_CMD_PORT_H);
459
460 spin_unlock_irqrestore(&priv->board->cmd_lock, flags);
461
462 return 0;
463 }
464
465 /* board specific CANFD command post-processing */
pciefd_post_cmd(struct peak_canfd_priv * ucan)466 static int pciefd_post_cmd(struct peak_canfd_priv *ucan)
467 {
468 struct pciefd_can *priv = (struct pciefd_can *)ucan;
469 u16 cmd = pucan_cmd_get_opcode(&priv->pucan_cmd);
470
471 switch (cmd) {
472 case PUCAN_CMD_RESET_MODE:
473
474 if (ucan->can.state == CAN_STATE_STOPPED)
475 break;
476
477 /* controller now in reset mode: */
478
479 /* disable IRQ for this CAN */
480 pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT,
481 PCIEFD_REG_CAN_RX_CTL_CLR);
482
483 /* stop and reset DMA addresses in Tx/Rx engines */
484 pciefd_can_clear_tx_dma(priv);
485 pciefd_can_clear_rx_dma(priv);
486
487 /* wait for above commands to complete (read cycle) */
488 (void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1);
489
490 free_irq(priv->ucan.ndev->irq, priv);
491
492 ucan->can.state = CAN_STATE_STOPPED;
493
494 break;
495 }
496
497 return 0;
498 }
499
pciefd_alloc_tx_msg(struct peak_canfd_priv * ucan,u16 msg_size,int * room_left)500 static void *pciefd_alloc_tx_msg(struct peak_canfd_priv *ucan, u16 msg_size,
501 int *room_left)
502 {
503 struct pciefd_can *priv = (struct pciefd_can *)ucan;
504 struct pciefd_page *page = priv->tx_pages + priv->tx_page_index;
505 unsigned long flags;
506 void *msg;
507
508 spin_lock_irqsave(&priv->tx_lock, flags);
509
510 if (page->offset + msg_size > page->size) {
511 struct pciefd_tx_link *lk;
512
513 /* not enough space in this page: try another one */
514 if (!priv->tx_pages_free) {
515 spin_unlock_irqrestore(&priv->tx_lock, flags);
516
517 /* Tx overflow */
518 return NULL;
519 }
520
521 priv->tx_pages_free--;
522
523 /* keep address of the very last free slot of current page */
524 lk = page->vbase + page->offset;
525
526 /* next, move on a new free page */
527 priv->tx_page_index = (priv->tx_page_index + 1) %
528 PCIEFD_TX_PAGE_COUNT;
529 page = priv->tx_pages + priv->tx_page_index;
530
531 /* put link record to this new page at the end of prev one */
532 lk->size = cpu_to_le16(sizeof(*lk));
533 lk->type = cpu_to_le16(CANFD_MSG_LNK_TX);
534 lk->laddr_lo = cpu_to_le32(page->lbase);
535
536 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
537 lk->laddr_hi = cpu_to_le32(page->lbase >> 32);
538 #else
539 lk->laddr_hi = 0;
540 #endif
541 /* next msgs will be put from the begininng of this new page */
542 page->offset = 0;
543 }
544
545 *room_left = priv->tx_pages_free * page->size;
546
547 spin_unlock_irqrestore(&priv->tx_lock, flags);
548
549 msg = page->vbase + page->offset;
550
551 /* give back room left in the tx ring */
552 *room_left += page->size - (page->offset + msg_size);
553
554 return msg;
555 }
556
pciefd_write_tx_msg(struct peak_canfd_priv * ucan,struct pucan_tx_msg * msg)557 static int pciefd_write_tx_msg(struct peak_canfd_priv *ucan,
558 struct pucan_tx_msg *msg)
559 {
560 struct pciefd_can *priv = (struct pciefd_can *)ucan;
561 struct pciefd_page *page = priv->tx_pages + priv->tx_page_index;
562
563 /* this slot is now reserved for writing the frame */
564 page->offset += le16_to_cpu(msg->size);
565
566 /* tell the board a frame has been written in Tx DMA area */
567 pciefd_can_writereg(priv, 1, PCIEFD_REG_CAN_TX_REQ_ACC);
568
569 return 0;
570 }
571
572 /* probe for CAN-FD channel #pciefd_board->can_count */
pciefd_can_probe(struct pciefd_board * pciefd)573 static int pciefd_can_probe(struct pciefd_board *pciefd)
574 {
575 struct net_device *ndev;
576 struct pciefd_can *priv;
577 u32 clk;
578 int err;
579
580 /* allocate the candev object with default isize of echo skbs ring */
581 ndev = alloc_peak_canfd_dev(sizeof(*priv), pciefd->can_count,
582 PCIEFD_ECHO_SKB_MAX);
583 if (!ndev) {
584 dev_err(&pciefd->pci_dev->dev,
585 "failed to alloc candev object\n");
586 goto failure;
587 }
588
589 priv = netdev_priv(ndev);
590
591 /* fill-in candev private object: */
592
593 /* setup PCIe-FD own callbacks */
594 priv->ucan.pre_cmd = pciefd_pre_cmd;
595 priv->ucan.write_cmd = pciefd_write_cmd;
596 priv->ucan.post_cmd = pciefd_post_cmd;
597 priv->ucan.enable_tx_path = pciefd_enable_tx_path;
598 priv->ucan.alloc_tx_msg = pciefd_alloc_tx_msg;
599 priv->ucan.write_tx_msg = pciefd_write_tx_msg;
600
601 /* setup PCIe-FD own command buffer */
602 priv->ucan.cmd_buffer = &priv->pucan_cmd;
603 priv->ucan.cmd_maxlen = sizeof(priv->pucan_cmd);
604
605 priv->board = pciefd;
606
607 /* CAN config regs block address */
608 priv->reg_base = pciefd->reg_base + PCIEFD_CANX_OFF(priv->ucan.index);
609
610 /* allocate non-cacheable DMA'able 4KB memory area for Rx */
611 priv->rx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev,
612 PCIEFD_RX_DMA_SIZE,
613 &priv->rx_dma_laddr,
614 GFP_KERNEL);
615 if (!priv->rx_dma_vaddr) {
616 dev_err(&pciefd->pci_dev->dev,
617 "Rx dmam_alloc_coherent(%u) failure\n",
618 PCIEFD_RX_DMA_SIZE);
619 goto err_free_candev;
620 }
621
622 /* allocate non-cacheable DMA'able 4KB memory area for Tx */
623 priv->tx_dma_vaddr = dmam_alloc_coherent(&pciefd->pci_dev->dev,
624 PCIEFD_TX_DMA_SIZE,
625 &priv->tx_dma_laddr,
626 GFP_KERNEL);
627 if (!priv->tx_dma_vaddr) {
628 dev_err(&pciefd->pci_dev->dev,
629 "Tx dmam_alloc_coherent(%u) failure\n",
630 PCIEFD_TX_DMA_SIZE);
631 goto err_free_candev;
632 }
633
634 /* CAN clock in RST mode */
635 pciefd_can_writereg(priv, CANFD_MISC_TS_RST, PCIEFD_REG_CAN_MISC);
636
637 /* read current clock value */
638 clk = pciefd_can_readreg(priv, PCIEFD_REG_CAN_CLK_SEL);
639 switch (clk) {
640 case CANFD_CLK_SEL_20MHZ:
641 priv->ucan.can.clock.freq = 20 * 1000 * 1000;
642 break;
643 case CANFD_CLK_SEL_24MHZ:
644 priv->ucan.can.clock.freq = 24 * 1000 * 1000;
645 break;
646 case CANFD_CLK_SEL_30MHZ:
647 priv->ucan.can.clock.freq = 30 * 1000 * 1000;
648 break;
649 case CANFD_CLK_SEL_40MHZ:
650 priv->ucan.can.clock.freq = 40 * 1000 * 1000;
651 break;
652 case CANFD_CLK_SEL_60MHZ:
653 priv->ucan.can.clock.freq = 60 * 1000 * 1000;
654 break;
655 default:
656 pciefd_can_writereg(priv, CANFD_CLK_SEL_80MHZ,
657 PCIEFD_REG_CAN_CLK_SEL);
658
659 fallthrough;
660 case CANFD_CLK_SEL_80MHZ:
661 priv->ucan.can.clock.freq = 80 * 1000 * 1000;
662 break;
663 }
664
665 ndev->irq = pciefd->pci_dev->irq;
666
667 SET_NETDEV_DEV(ndev, &pciefd->pci_dev->dev);
668
669 err = register_candev(ndev);
670 if (err) {
671 dev_err(&pciefd->pci_dev->dev,
672 "couldn't register CAN device: %d\n", err);
673 goto err_free_candev;
674 }
675
676 spin_lock_init(&priv->tx_lock);
677
678 /* save the object address in the board structure */
679 pciefd->can[pciefd->can_count] = priv;
680
681 dev_info(&pciefd->pci_dev->dev, "%s at reg_base=0x%p irq=%d\n",
682 ndev->name, priv->reg_base, ndev->irq);
683
684 return 0;
685
686 err_free_candev:
687 free_candev(ndev);
688
689 failure:
690 return -ENOMEM;
691 }
692
693 /* remove a CAN-FD channel by releasing all of its resources */
pciefd_can_remove(struct pciefd_can * priv)694 static void pciefd_can_remove(struct pciefd_can *priv)
695 {
696 /* unregister (close) the can device to go back to RST mode first */
697 unregister_candev(priv->ucan.ndev);
698
699 /* finally, free the candev object */
700 free_candev(priv->ucan.ndev);
701 }
702
703 /* remove all CAN-FD channels by releasing their own resources */
pciefd_can_remove_all(struct pciefd_board * pciefd)704 static void pciefd_can_remove_all(struct pciefd_board *pciefd)
705 {
706 while (pciefd->can_count > 0)
707 pciefd_can_remove(pciefd->can[--pciefd->can_count]);
708 }
709
710 /* probe for the entire device */
peak_pciefd_probe(struct pci_dev * pdev,const struct pci_device_id * ent)711 static int peak_pciefd_probe(struct pci_dev *pdev,
712 const struct pci_device_id *ent)
713 {
714 struct pciefd_board *pciefd;
715 int err, can_count;
716 u16 sub_sys_id;
717 u8 hw_ver_major;
718 u8 hw_ver_minor;
719 u8 hw_ver_sub;
720 u32 v2;
721
722 err = pci_enable_device(pdev);
723 if (err)
724 return err;
725 err = pci_request_regions(pdev, PCIEFD_DRV_NAME);
726 if (err)
727 goto err_disable_pci;
728
729 /* the number of channels depends on sub-system id */
730 err = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sub_sys_id);
731 if (err)
732 goto err_release_regions;
733
734 dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
735 pdev->vendor, pdev->device, sub_sys_id);
736
737 if (sub_sys_id >= 0x0012)
738 can_count = 4;
739 else if (sub_sys_id >= 0x0010)
740 can_count = 3;
741 else if (sub_sys_id >= 0x0004)
742 can_count = 2;
743 else
744 can_count = 1;
745
746 /* allocate board structure object */
747 pciefd = devm_kzalloc(&pdev->dev, struct_size(pciefd, can, can_count),
748 GFP_KERNEL);
749 if (!pciefd) {
750 err = -ENOMEM;
751 goto err_release_regions;
752 }
753
754 /* initialize the board structure */
755 pciefd->pci_dev = pdev;
756 spin_lock_init(&pciefd->cmd_lock);
757
758 /* save the PCI BAR0 virtual address for further system regs access */
759 pciefd->reg_base = pci_iomap(pdev, 0, PCIEFD_BAR0_SIZE);
760 if (!pciefd->reg_base) {
761 dev_err(&pdev->dev, "failed to map PCI resource #0\n");
762 err = -ENOMEM;
763 goto err_release_regions;
764 }
765
766 /* read the firmware version number */
767 v2 = pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER2);
768
769 hw_ver_major = (v2 & 0x0000f000) >> 12;
770 hw_ver_minor = (v2 & 0x00000f00) >> 8;
771 hw_ver_sub = (v2 & 0x000000f0) >> 4;
772
773 dev_info(&pdev->dev,
774 "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count,
775 hw_ver_major, hw_ver_minor, hw_ver_sub);
776
777 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
778 /* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and
779 * 64-bit logical addresses: this workaround forces usage of 32-bit
780 * DMA addresses only when such a fw is detected.
781 */
782 if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) <
783 PCIEFD_FW_VERSION(3, 3, 0)) {
784 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
785 if (err)
786 dev_warn(&pdev->dev,
787 "warning: can't set DMA mask %llxh (err %d)\n",
788 DMA_BIT_MASK(32), err);
789 }
790 #endif
791
792 /* stop system clock */
793 pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN,
794 PCIEFD_REG_SYS_CTL_CLR);
795
796 pci_set_master(pdev);
797
798 /* create now the corresponding channels objects */
799 while (pciefd->can_count < can_count) {
800 err = pciefd_can_probe(pciefd);
801 if (err)
802 goto err_free_canfd;
803
804 pciefd->can_count++;
805 }
806
807 /* set system timestamps counter in RST mode */
808 pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST,
809 PCIEFD_REG_SYS_CTL_SET);
810
811 /* wait a bit (read cycle) */
812 (void)pciefd_sys_readreg(pciefd, PCIEFD_REG_SYS_VER1);
813
814 /* free all clocks */
815 pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_TS_RST,
816 PCIEFD_REG_SYS_CTL_CLR);
817
818 /* start system clock */
819 pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN,
820 PCIEFD_REG_SYS_CTL_SET);
821
822 /* remember the board structure address in the device user data */
823 pci_set_drvdata(pdev, pciefd);
824
825 return 0;
826
827 err_free_canfd:
828 pciefd_can_remove_all(pciefd);
829
830 pci_iounmap(pdev, pciefd->reg_base);
831
832 err_release_regions:
833 pci_release_regions(pdev);
834
835 err_disable_pci:
836 pci_disable_device(pdev);
837
838 /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
839 * the probe() function must return a negative errno in case of failure
840 * (err is unchanged if negative)
841 */
842 return pcibios_err_to_errno(err);
843 }
844
845 /* free the board structure object, as well as its resources: */
peak_pciefd_remove(struct pci_dev * pdev)846 static void peak_pciefd_remove(struct pci_dev *pdev)
847 {
848 struct pciefd_board *pciefd = pci_get_drvdata(pdev);
849
850 /* release CAN-FD channels resources */
851 pciefd_can_remove_all(pciefd);
852
853 pci_iounmap(pdev, pciefd->reg_base);
854
855 pci_release_regions(pdev);
856 pci_disable_device(pdev);
857 }
858
859 static struct pci_driver peak_pciefd_driver = {
860 .name = PCIEFD_DRV_NAME,
861 .id_table = peak_pciefd_tbl,
862 .probe = peak_pciefd_probe,
863 .remove = peak_pciefd_remove,
864 };
865
866 module_pci_driver(peak_pciefd_driver);
867