1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
4 * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com>
5 *
6 * Derived from the PCAN project file driver/src/pcan_pci.c:
7 *
8 * Copyright (C) 2001-2006 PEAK System-Technik GmbH
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/interrupt.h>
14 #include <linux/netdevice.h>
15 #include <linux/delay.h>
16 #include <linux/pci.h>
17 #include <linux/io.h>
18 #include <linux/i2c.h>
19 #include <linux/i2c-algo-bit.h>
20 #include <linux/can.h>
21 #include <linux/can/dev.h>
22
23 #include "sja1000.h"
24
25 MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
26 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
27 MODULE_LICENSE("GPL v2");
28
29 #define DRV_NAME "peak_pci"
30
31 /* FPGA cards FW version registers */
32 #define PEAK_VER_REG1 0x40
33 #define PEAK_VER_REG2 0x44
34
35 struct peak_pciec_card;
36 struct peak_pci_chan {
37 void __iomem *cfg_base; /* Common for all channels */
38 struct net_device *prev_dev; /* Chain of network devices */
39 u16 icr_mask; /* Interrupt mask for fast ack */
40 struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */
41 };
42
43 #define PEAK_PCI_CAN_CLOCK (16000000 / 2)
44
45 #define PEAK_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
46 #define PEAK_PCI_OCR OCR_TX0_PUSHPULL
47
48 /* Important PITA registers */
49 #define PITA_ICR 0x00 /* Interrupt control register */
50 #define PITA_GPIOICR 0x18 /* GPIO interface control register */
51 #define PITA_MISC 0x1C /* Miscellaneous register */
52
53 #define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */
54 #define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */
55
56 #define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */
57 #define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */
58 #define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */
59 #define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */
60 #define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */
61 #define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */
62 #define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */
63 #define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */
64 #define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */
65 #define PEAK_PCIE_OEM_ID 0x0009 /* PCAN-PCI Express OEM */
66 #define PEAK_PCIEC34_DEVICE_ID 0x000A /* PCAN-PCI Express 34 (one channel) */
67
68 #define PEAK_PCI_CHAN_MAX 4
69
70 static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = {
71 0x02, 0x01, 0x40, 0x80
72 };
73
74 static const struct pci_device_id peak_pci_tbl[] = {
75 {
76 PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
77 .driver_data = (kernel_ulong_t)"PCAN-PCI",
78 }, {
79 PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
80 .driver_data = (kernel_ulong_t)"PCAN-PCI Express",
81 }, {
82 PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
83 .driver_data = (kernel_ulong_t)"PCAN-miniPCI",
84 }, {
85 PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
86 .driver_data = (kernel_ulong_t)"PCAN-miniPCIe",
87 }, {
88 PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
89 .driver_data = (kernel_ulong_t)"PCAN-PC/104-Plus Quad",
90 }, {
91 PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
92 .driver_data = (kernel_ulong_t)"PCAN-PCI/104-Express",
93 }, {
94 PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
95 .driver_data = (kernel_ulong_t)"PCAN-cPCI",
96 }, {
97 PEAK_PCI_VENDOR_ID, PEAK_PCIE_OEM_ID, PCI_ANY_ID, PCI_ANY_ID,
98 .driver_data = (kernel_ulong_t)"PCAN-Chip PCIe",
99 },
100 #ifdef CONFIG_CAN_PEAK_PCIEC
101 {
102 PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
103 .driver_data = (kernel_ulong_t)"PCAN-ExpressCard",
104 }, {
105 PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
106 .driver_data = (kernel_ulong_t)"PCAN-ExpressCard 34",
107 },
108 #endif
109 { /* sentinel */ }
110 };
111
112 MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
113
114 #ifdef CONFIG_CAN_PEAK_PCIEC
115 /* PCAN-ExpressCard needs I2C bit-banging configuration option. */
116
117 /* GPIOICR byte access offsets */
118 #define PITA_GPOUT 0x18 /* GPx output value */
119 #define PITA_GPIN 0x19 /* GPx input value */
120 #define PITA_GPOEN 0x1A /* configure GPx as output pin */
121
122 /* I2C GP bits */
123 #define PITA_GPIN_SCL 0x01 /* Serial Clock Line */
124 #define PITA_GPIN_SDA 0x04 /* Serial DAta line */
125
126 #define PCA9553_1_SLAVEADDR (0xC4 >> 1)
127
128 /* PCA9553 LS0 fields values */
129 enum {
130 PCA9553_LOW,
131 PCA9553_HIGHZ,
132 PCA9553_PWM0,
133 PCA9553_PWM1
134 };
135
136 /* LEDs control */
137 #define PCA9553_ON PCA9553_LOW
138 #define PCA9553_OFF PCA9553_HIGHZ
139 #define PCA9553_SLOW PCA9553_PWM0
140 #define PCA9553_FAST PCA9553_PWM1
141
142 #define PCA9553_LED(c) (1 << (c))
143 #define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1))
144
145 #define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c)
146 #define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c)
147 #define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c)
148 #define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c)
149 #define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c)
150
151 #define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1))
152
153 #define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */
154
155 struct peak_pciec_chan {
156 struct net_device *netdev;
157 unsigned long prev_rx_bytes;
158 unsigned long prev_tx_bytes;
159 };
160
161 struct peak_pciec_card {
162 void __iomem *cfg_base; /* Common for all channels */
163 void __iomem *reg_base; /* first channel base address */
164 u8 led_cache; /* leds state cache */
165
166 /* PCIExpressCard i2c data */
167 struct i2c_algo_bit_data i2c_bit;
168 struct i2c_adapter led_chip;
169 struct delayed_work led_work; /* led delayed work */
170 int chan_count;
171 struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX];
172 };
173
174 /* "normal" pci register write callback is overloaded for leds control */
175 static void peak_pci_write_reg(const struct sja1000_priv *priv,
176 int port, u8 val);
177
pita_set_scl_highz(struct peak_pciec_card * card)178 static inline void pita_set_scl_highz(struct peak_pciec_card *card)
179 {
180 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL;
181
182 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
183 }
184
pita_set_sda_highz(struct peak_pciec_card * card)185 static inline void pita_set_sda_highz(struct peak_pciec_card *card)
186 {
187 u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA;
188
189 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
190 }
191
peak_pciec_init_pita_gpio(struct peak_pciec_card * card)192 static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card)
193 {
194 /* raise SCL & SDA GPIOs to high-Z */
195 pita_set_scl_highz(card);
196 pita_set_sda_highz(card);
197 }
198
pita_setsda(void * data,int state)199 static void pita_setsda(void *data, int state)
200 {
201 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
202 u8 gp_out, gp_outen;
203
204 /* set output sda always to 0 */
205 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA;
206 writeb(gp_out, card->cfg_base + PITA_GPOUT);
207
208 /* control output sda with GPOEN */
209 gp_outen = readb(card->cfg_base + PITA_GPOEN);
210 if (state)
211 gp_outen &= ~PITA_GPIN_SDA;
212 else
213 gp_outen |= PITA_GPIN_SDA;
214
215 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
216 }
217
pita_setscl(void * data,int state)218 static void pita_setscl(void *data, int state)
219 {
220 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
221 u8 gp_out, gp_outen;
222
223 /* set output scl always to 0 */
224 gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL;
225 writeb(gp_out, card->cfg_base + PITA_GPOUT);
226
227 /* control output scl with GPOEN */
228 gp_outen = readb(card->cfg_base + PITA_GPOEN);
229 if (state)
230 gp_outen &= ~PITA_GPIN_SCL;
231 else
232 gp_outen |= PITA_GPIN_SCL;
233
234 writeb(gp_outen, card->cfg_base + PITA_GPOEN);
235 }
236
pita_getsda(void * data)237 static int pita_getsda(void *data)
238 {
239 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
240
241 /* set tristate */
242 pita_set_sda_highz(card);
243
244 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0;
245 }
246
pita_getscl(void * data)247 static int pita_getscl(void *data)
248 {
249 struct peak_pciec_card *card = (struct peak_pciec_card *)data;
250
251 /* set tristate */
252 pita_set_scl_highz(card);
253
254 return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0;
255 }
256
257 /* write commands to the LED chip though the I2C-bus of the PCAN-PCIeC */
peak_pciec_write_pca9553(struct peak_pciec_card * card,u8 offset,u8 data)258 static int peak_pciec_write_pca9553(struct peak_pciec_card *card,
259 u8 offset, u8 data)
260 {
261 u8 buffer[2] = {
262 offset,
263 data
264 };
265 struct i2c_msg msg = {
266 .addr = PCA9553_1_SLAVEADDR,
267 .len = 2,
268 .buf = buffer,
269 };
270 int ret;
271
272 /* cache led mask */
273 if (offset == 5 && data == card->led_cache)
274 return 0;
275
276 ret = i2c_transfer(&card->led_chip, &msg, 1);
277 if (ret < 0)
278 return ret;
279
280 if (offset == 5)
281 card->led_cache = data;
282
283 return 0;
284 }
285
286 /* delayed work callback used to control the LEDs */
peak_pciec_led_work(struct work_struct * work)287 static void peak_pciec_led_work(struct work_struct *work)
288 {
289 struct peak_pciec_card *card =
290 container_of(work, struct peak_pciec_card, led_work.work);
291 struct net_device *netdev;
292 u8 new_led = card->led_cache;
293 int i, up_count = 0;
294
295 /* first check what is to do */
296 for (i = 0; i < card->chan_count; i++) {
297 /* default is: not configured */
298 new_led &= ~PCA9553_LED_MASK(i);
299 new_led |= PCA9553_LED_ON(i);
300
301 netdev = card->channel[i].netdev;
302 if (!netdev || !(netdev->flags & IFF_UP))
303 continue;
304
305 up_count++;
306
307 /* no activity (but configured) */
308 new_led &= ~PCA9553_LED_MASK(i);
309 new_led |= PCA9553_LED_SLOW(i);
310
311 /* if bytes counters changed, set fast blinking led */
312 if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) {
313 card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes;
314 new_led &= ~PCA9553_LED_MASK(i);
315 new_led |= PCA9553_LED_FAST(i);
316 }
317 if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) {
318 card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes;
319 new_led &= ~PCA9553_LED_MASK(i);
320 new_led |= PCA9553_LED_FAST(i);
321 }
322 }
323
324 /* check if LS0 settings changed, only update i2c if so */
325 peak_pciec_write_pca9553(card, 5, new_led);
326
327 /* restart timer (except if no more configured channels) */
328 if (up_count)
329 schedule_delayed_work(&card->led_work, HZ);
330 }
331
332 /* set LEDs blinking state */
peak_pciec_set_leds(struct peak_pciec_card * card,u8 led_mask,u8 s)333 static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s)
334 {
335 u8 new_led = card->led_cache;
336 int i;
337
338 /* first check what is to do */
339 for (i = 0; i < card->chan_count; i++)
340 if (led_mask & PCA9553_LED(i)) {
341 new_led &= ~PCA9553_LED_MASK(i);
342 new_led |= PCA9553_LED_STATE(s, i);
343 }
344
345 /* check if LS0 settings changed, only update i2c if so */
346 peak_pciec_write_pca9553(card, 5, new_led);
347 }
348
349 /* start one second delayed work to control LEDs */
peak_pciec_start_led_work(struct peak_pciec_card * card)350 static void peak_pciec_start_led_work(struct peak_pciec_card *card)
351 {
352 schedule_delayed_work(&card->led_work, HZ);
353 }
354
355 /* stop LEDs delayed work */
peak_pciec_stop_led_work(struct peak_pciec_card * card)356 static void peak_pciec_stop_led_work(struct peak_pciec_card *card)
357 {
358 cancel_delayed_work_sync(&card->led_work);
359 }
360
361 /* initialize the PCA9553 4-bit I2C-bus LED chip */
peak_pciec_init_leds(struct peak_pciec_card * card)362 static int peak_pciec_init_leds(struct peak_pciec_card *card)
363 {
364 int err;
365
366 /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */
367 err = peak_pciec_write_pca9553(card, 1, 44 / 1);
368 if (err)
369 return err;
370
371 /* duty cycle 0: 50% */
372 err = peak_pciec_write_pca9553(card, 2, 0x80);
373 if (err)
374 return err;
375
376 /* prescaler for frequency 1: "FAST" = 5 Hz */
377 err = peak_pciec_write_pca9553(card, 3, 44 / 5);
378 if (err)
379 return err;
380
381 /* duty cycle 1: 50% */
382 err = peak_pciec_write_pca9553(card, 4, 0x80);
383 if (err)
384 return err;
385
386 /* switch LEDs to initial state */
387 return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT);
388 }
389
390 /* restore LEDs state to off peak_pciec_leds_exit */
peak_pciec_leds_exit(struct peak_pciec_card * card)391 static void peak_pciec_leds_exit(struct peak_pciec_card *card)
392 {
393 /* switch LEDs to off */
394 peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL);
395 }
396
397 /* normal write sja1000 register method overloaded to catch when controller
398 * is started or stopped, to control leds
399 */
peak_pciec_write_reg(const struct sja1000_priv * priv,int port,u8 val)400 static void peak_pciec_write_reg(const struct sja1000_priv *priv,
401 int port, u8 val)
402 {
403 struct peak_pci_chan *chan = priv->priv;
404 struct peak_pciec_card *card = chan->pciec_card;
405 int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE;
406
407 /* sja1000 register changes control the leds state */
408 if (port == SJA1000_MOD)
409 switch (val) {
410 case MOD_RM:
411 /* Reset Mode: set led on */
412 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON);
413 break;
414 case 0x00:
415 /* Normal Mode: led slow blinking and start led timer */
416 peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW);
417 peak_pciec_start_led_work(card);
418 break;
419 default:
420 break;
421 }
422
423 /* call base function */
424 peak_pci_write_reg(priv, port, val);
425 }
426
427 static const struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = {
428 .setsda = pita_setsda,
429 .setscl = pita_setscl,
430 .getsda = pita_getsda,
431 .getscl = pita_getscl,
432 .udelay = 10,
433 .timeout = HZ,
434 };
435
peak_pciec_probe(struct pci_dev * pdev,struct net_device * dev)436 static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
437 {
438 struct sja1000_priv *priv = netdev_priv(dev);
439 struct peak_pci_chan *chan = priv->priv;
440 struct peak_pciec_card *card;
441 int err;
442
443 /* copy i2c object address from 1st channel */
444 if (chan->prev_dev) {
445 struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev);
446 struct peak_pci_chan *prev_chan = prev_priv->priv;
447
448 card = prev_chan->pciec_card;
449 if (!card)
450 return -ENODEV;
451
452 /* channel is the first one: do the init part */
453 } else {
454 /* create the bit banging I2C adapter structure */
455 card = kzalloc(sizeof(*card), GFP_KERNEL);
456 if (!card)
457 return -ENOMEM;
458
459 card->cfg_base = chan->cfg_base;
460 card->reg_base = priv->reg_base;
461
462 card->led_chip.owner = THIS_MODULE;
463 card->led_chip.dev.parent = &pdev->dev;
464 card->led_chip.algo_data = &card->i2c_bit;
465 strscpy(card->led_chip.name, "peak_i2c",
466 sizeof(card->led_chip.name));
467
468 card->i2c_bit = peak_pciec_i2c_bit_ops;
469 card->i2c_bit.udelay = 10;
470 card->i2c_bit.timeout = HZ;
471 card->i2c_bit.data = card;
472
473 peak_pciec_init_pita_gpio(card);
474
475 err = i2c_bit_add_bus(&card->led_chip);
476 if (err) {
477 dev_err(&pdev->dev, "i2c init failed\n");
478 goto pciec_init_err_1;
479 }
480
481 err = peak_pciec_init_leds(card);
482 if (err) {
483 dev_err(&pdev->dev, "leds hardware init failed\n");
484 goto pciec_init_err_2;
485 }
486
487 INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work);
488 /* PCAN-ExpressCard needs its own callback for leds */
489 priv->write_reg = peak_pciec_write_reg;
490 }
491
492 chan->pciec_card = card;
493 card->channel[card->chan_count++].netdev = dev;
494
495 return 0;
496
497 pciec_init_err_2:
498 i2c_del_adapter(&card->led_chip);
499
500 pciec_init_err_1:
501 peak_pciec_init_pita_gpio(card);
502 kfree(card);
503
504 return err;
505 }
506
peak_pciec_remove(struct peak_pciec_card * card)507 static void peak_pciec_remove(struct peak_pciec_card *card)
508 {
509 peak_pciec_stop_led_work(card);
510 peak_pciec_leds_exit(card);
511 i2c_del_adapter(&card->led_chip);
512 peak_pciec_init_pita_gpio(card);
513 kfree(card);
514 }
515
516 #else /* CONFIG_CAN_PEAK_PCIEC */
517
518 /* Placebo functions when PCAN-ExpressCard support is not selected */
peak_pciec_probe(struct pci_dev * pdev,struct net_device * dev)519 static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
520 {
521 return -ENODEV;
522 }
523
peak_pciec_remove(struct peak_pciec_card * card)524 static inline void peak_pciec_remove(struct peak_pciec_card *card)
525 {
526 }
527 #endif /* CONFIG_CAN_PEAK_PCIEC */
528
peak_pci_read_reg(const struct sja1000_priv * priv,int port)529 static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
530 {
531 return readb(priv->reg_base + (port << 2));
532 }
533
peak_pci_write_reg(const struct sja1000_priv * priv,int port,u8 val)534 static void peak_pci_write_reg(const struct sja1000_priv *priv,
535 int port, u8 val)
536 {
537 writeb(val, priv->reg_base + (port << 2));
538 }
539
peak_pci_post_irq(const struct sja1000_priv * priv)540 static void peak_pci_post_irq(const struct sja1000_priv *priv)
541 {
542 struct peak_pci_chan *chan = priv->priv;
543 u16 icr;
544
545 /* Select and clear in PITA stored interrupt */
546 icr = readw(chan->cfg_base + PITA_ICR);
547 if (icr & chan->icr_mask)
548 writew(chan->icr_mask, chan->cfg_base + PITA_ICR);
549 }
550
peak_pci_probe(struct pci_dev * pdev,const struct pci_device_id * ent)551 static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
552 {
553 struct sja1000_priv *priv;
554 struct peak_pci_chan *chan;
555 struct net_device *dev, *prev_dev;
556 void __iomem *cfg_base, *reg_base;
557 u16 sub_sys_id, icr;
558 int i, err, channels;
559 char fw_str[14] = "";
560
561 err = pci_enable_device(pdev);
562 if (err)
563 return err;
564
565 err = pci_request_regions(pdev, DRV_NAME);
566 if (err)
567 goto failure_disable_pci;
568
569 err = pci_read_config_word(pdev, 0x2e, &sub_sys_id);
570 if (err)
571 goto failure_release_regions;
572
573 dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
574 pdev->vendor, pdev->device, sub_sys_id);
575
576 err = pci_write_config_word(pdev, 0x44, 0);
577 if (err)
578 goto failure_release_regions;
579
580 if (sub_sys_id >= 12)
581 channels = 4;
582 else if (sub_sys_id >= 10)
583 channels = 3;
584 else if (sub_sys_id >= 4)
585 channels = 2;
586 else
587 channels = 1;
588
589 cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
590 if (!cfg_base) {
591 dev_err(&pdev->dev, "failed to map PCI resource #0\n");
592 err = -ENOMEM;
593 goto failure_release_regions;
594 }
595
596 reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
597 if (!reg_base) {
598 dev_err(&pdev->dev, "failed to map PCI resource #1\n");
599 err = -ENOMEM;
600 goto failure_unmap_cfg_base;
601 }
602
603 /* Set GPIO control register */
604 writew(0x0005, cfg_base + PITA_GPIOICR + 2);
605 /* Enable all channels of this card */
606 writeb(0x00, cfg_base + PITA_GPIOICR);
607 /* Toggle reset */
608 writeb(0x05, cfg_base + PITA_MISC + 3);
609 usleep_range(5000, 6000);
610 /* Leave parport mux mode */
611 writeb(0x04, cfg_base + PITA_MISC + 3);
612
613 /* FPGA equipped card if not 0 */
614 if (readl(cfg_base + PEAK_VER_REG1)) {
615 /* FPGA card: display version of the running firmware */
616 u32 fw_ver = readl(cfg_base + PEAK_VER_REG2);
617
618 snprintf(fw_str, sizeof(fw_str), " FW v%u.%u.%u",
619 (fw_ver >> 12) & 0xf,
620 (fw_ver >> 8) & 0xf,
621 (fw_ver >> 4) & 0xf);
622 }
623
624 /* Display commercial name (and, eventually, FW version) of the card */
625 dev_info(&pdev->dev, "%ux CAN %s%s\n",
626 channels, (const char *)ent->driver_data, fw_str);
627
628 icr = readw(cfg_base + PITA_ICR + 2);
629
630 for (i = 0; i < channels; i++) {
631 dev = alloc_sja1000dev(sizeof(struct peak_pci_chan));
632 if (!dev) {
633 err = -ENOMEM;
634 goto failure_remove_channels;
635 }
636
637 priv = netdev_priv(dev);
638 chan = priv->priv;
639
640 chan->cfg_base = cfg_base;
641 priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE;
642
643 priv->read_reg = peak_pci_read_reg;
644 priv->write_reg = peak_pci_write_reg;
645 priv->post_irq = peak_pci_post_irq;
646
647 priv->can.clock.freq = PEAK_PCI_CAN_CLOCK;
648 priv->ocr = PEAK_PCI_OCR;
649 priv->cdr = PEAK_PCI_CDR;
650 /* Neither a slave nor a single device distributes the clock */
651 if (channels == 1 || i > 0)
652 priv->cdr |= CDR_CLK_OFF;
653
654 /* Setup interrupt handling */
655 priv->irq_flags = IRQF_SHARED;
656 dev->irq = pdev->irq;
657
658 chan->icr_mask = peak_pci_icr_masks[i];
659 icr |= chan->icr_mask;
660
661 SET_NETDEV_DEV(dev, &pdev->dev);
662 dev->dev_id = i;
663
664 /* Create chain of SJA1000 devices */
665 chan->prev_dev = pci_get_drvdata(pdev);
666 pci_set_drvdata(pdev, dev);
667
668 /* PCAN-ExpressCard needs some additional i2c init.
669 * This must be done *before* register_sja1000dev() but
670 * *after* devices linkage
671 */
672 if (pdev->device == PEAK_PCIEC_DEVICE_ID ||
673 pdev->device == PEAK_PCIEC34_DEVICE_ID) {
674 err = peak_pciec_probe(pdev, dev);
675 if (err) {
676 dev_err(&pdev->dev,
677 "failed to probe device (err %d)\n",
678 err);
679 goto failure_free_dev;
680 }
681 }
682
683 err = register_sja1000dev(dev);
684 if (err) {
685 dev_err(&pdev->dev, "failed to register device\n");
686 goto failure_free_dev;
687 }
688
689 dev_info(&pdev->dev,
690 "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
691 dev->name, priv->reg_base, chan->cfg_base, dev->irq);
692 }
693
694 /* Enable interrupts */
695 writew(icr, cfg_base + PITA_ICR + 2);
696
697 return 0;
698
699 failure_free_dev:
700 pci_set_drvdata(pdev, chan->prev_dev);
701 free_sja1000dev(dev);
702
703 failure_remove_channels:
704 /* Disable interrupts */
705 writew(0x0, cfg_base + PITA_ICR + 2);
706
707 chan = NULL;
708 for (dev = pci_get_drvdata(pdev); dev; dev = prev_dev) {
709 priv = netdev_priv(dev);
710 chan = priv->priv;
711 prev_dev = chan->prev_dev;
712
713 unregister_sja1000dev(dev);
714 free_sja1000dev(dev);
715 }
716
717 /* free any PCIeC resources too */
718 if (chan && chan->pciec_card)
719 peak_pciec_remove(chan->pciec_card);
720
721 pci_iounmap(pdev, reg_base);
722
723 failure_unmap_cfg_base:
724 pci_iounmap(pdev, cfg_base);
725
726 failure_release_regions:
727 pci_release_regions(pdev);
728
729 failure_disable_pci:
730 pci_disable_device(pdev);
731
732 /* pci_xxx_config_word() return positive PCIBIOS_xxx error codes while
733 * the probe() function must return a negative errno in case of failure
734 * (err is unchanged if negative)
735 */
736 return pcibios_err_to_errno(err);
737 }
738
peak_pci_remove(struct pci_dev * pdev)739 static void peak_pci_remove(struct pci_dev *pdev)
740 {
741 struct net_device *dev = pci_get_drvdata(pdev); /* Last device */
742 struct sja1000_priv *priv = netdev_priv(dev);
743 struct peak_pci_chan *chan = priv->priv;
744 void __iomem *cfg_base = chan->cfg_base;
745 void __iomem *reg_base = priv->reg_base;
746
747 /* Disable interrupts */
748 writew(0x0, cfg_base + PITA_ICR + 2);
749
750 /* Loop over all registered devices */
751 while (1) {
752 struct net_device *prev_dev = chan->prev_dev;
753
754 dev_info(&pdev->dev, "removing device %s\n", dev->name);
755 /* do that only for first channel */
756 if (!prev_dev && chan->pciec_card)
757 peak_pciec_remove(chan->pciec_card);
758 unregister_sja1000dev(dev);
759 free_sja1000dev(dev);
760 dev = prev_dev;
761
762 if (!dev)
763 break;
764 priv = netdev_priv(dev);
765 chan = priv->priv;
766 }
767
768 pci_iounmap(pdev, reg_base);
769 pci_iounmap(pdev, cfg_base);
770 pci_release_regions(pdev);
771 pci_disable_device(pdev);
772 }
773
774 static struct pci_driver peak_pci_driver = {
775 .name = DRV_NAME,
776 .id_table = peak_pci_tbl,
777 .probe = peak_pci_probe,
778 .remove = peak_pci_remove,
779 };
780
781 module_pci_driver(peak_pci_driver);
782