xref: /titanic_41/usr/src/uts/sun4v/ontario/os/ontario.c (revision fa9e4066f08beec538e775443c5be79dd423fcab)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 
23 /*
24  * Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
25  * Use is subject to license terms.
26  */
27 
28 #pragma ident	"%Z%%M%	%I%	%E% SMI"
29 
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/sysmacros.h>
33 #include <sys/sunddi.h>
34 #include <sys/esunddi.h>
35 #include <sys/sunndi.h>
36 
37 #include <sys/platform_module.h>
38 #include <sys/errno.h>
39 #include <sys/utsname.h>
40 #include <sys/modctl.h>
41 #include <sys/systeminfo.h>
42 #include <sys/promif.h>
43 #include <sys/bootconf.h>
44 
45 /*
46  * Definitions for accessing the pci config space of the isa node
47  * of Southbridge.
48  */
49 #define	ONTARIO_ISA_PATHNAME	"/pci@7c0/pci@0/pci@1/pci@0/isa@2"
50 #define	ONTARIO_IDE_PATHNAME	"/pci@7c0/pci@0/pci@1/pci@0/ide@8"
51 
52 /*
53  * Handle for isa pci space
54  */
55 static ddi_acc_handle_t isa_handle;
56 
57 /*
58  * Platform power management drivers list - empty by default
59  */
60 char *platform_module_list[] = {
61 	(char *)0
62 };
63 
64 
65 /*ARGSUSED*/
66 void
plat_tod_fault(enum tod_fault_type tod_bad)67 plat_tod_fault(enum tod_fault_type tod_bad)
68 {
69 }
70 
71 void
load_platform_drivers(void)72 load_platform_drivers(void)
73 {
74 	dev_info_t 		*dip;		/* dip of the isa driver */
75 	pnode_t 		nodeid;
76 
77 	/*
78 	 * Install ISA driver. This is required for the southbridge IDE
79 	 * workaround - to reset the IDE channel during IDE bus reset.
80 	 * Panic the system in case ISA driver could not be loaded or
81 	 * any problem in accessing its pci config space. Since the register
82 	 * to reset the channel for IDE is in ISA config space!.
83 	 */
84 
85 	nodeid = prom_finddevice(ONTARIO_IDE_PATHNAME);
86 	if (nodeid == OBP_BADNODE) {
87 		return;
88 	}
89 	dip = e_ddi_hold_devi_by_path(ONTARIO_ISA_PATHNAME, 0);
90 	if (dip == NULL) {
91 		cmn_err(CE_PANIC, "Could not install the isa driver\n");
92 		return;
93 	}
94 
95 	if (pci_config_setup(dip, &isa_handle) != DDI_SUCCESS) {
96 		cmn_err(CE_PANIC, "Could not get the config space of isa\n");
97 		return;
98 	}
99 }
100 
101 /*
102  * This routine provides a workaround for a bug in the SB chip which
103  * can cause data corruption. Will be invoked from the IDE HBA driver for
104  * Acer SouthBridge at the time of IDE bus reset.
105  */
106 /*ARGSUSED*/
107 int
plat_ide_chipreset(dev_info_t * dip,int chno)108 plat_ide_chipreset(dev_info_t *dip, int chno)
109 {
110 	uint8_t	val;
111 	int	ret = DDI_SUCCESS;
112 
113 	if (isa_handle == NULL) {
114 		return (DDI_FAILURE);
115 	}
116 
117 	val = pci_config_get8(isa_handle, 0x58);
118 	/*
119 	 * The dip passed as the argument is not used here.
120 	 * This will be needed for platforms which have multiple on-board SB,
121 	 * The dip passed will be used to match the corresponding ISA node.
122 	 */
123 	switch (chno) {
124 	case 0:
125 		/*
126 		 * First disable the primary channel then re-enable it.
127 		 * As per ALI no wait should be required in between have
128 		 * given 1ms delay in between to be on safer side.
129 		 * bit 2 of register 0x58 when 0 disable the channel 0.
130 		 * bit 2 of register 0x58 when 1 enables the channel 0.
131 		 */
132 		pci_config_put8(isa_handle, 0x58, val & 0xFB);
133 		drv_usecwait(1000);
134 		pci_config_put8(isa_handle, 0x58, val);
135 		break;
136 	case 1:
137 		/*
138 		 * bit 3 of register 0x58 when 0 disable the channel 1.
139 		 * bit 3 of register 0x58 when 1 enables the channel 1.
140 		 */
141 		pci_config_put8(isa_handle, 0x58, val & 0xF7);
142 		drv_usecwait(1000);
143 		pci_config_put8(isa_handle, 0x58, val);
144 		break;
145 	default:
146 		/*
147 		 * Unknown channel number passed. Return failure.
148 		 */
149 		ret = DDI_FAILURE;
150 	}
151 
152 	return (ret);
153 }
154