xref: /illumos-gate/usr/src/uts/common/sys/scsi/adapters/mpi/mpi2.h (revision 72a2c48434886fc259a17942b7fe9e13ba064071)
1 /*-
2  * Copyright (c) 2012-2015 LSI Corp.
3  * Copyright (c) 2013-2016 Avago Technologies
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Neither the name of the author nor the names of any co-contributors
15  *    may be used to endorse or promote products derived from this software
16  *    without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  */
30 
31 /*
32  *  Copyright (c) 2000-2015 LSI Corporation.
33  *  Copyright (c) 2013-2016 Avago Technologies
34  *  All rights reserved.
35  *
36  *
37  *           Name:  mpi2.h
38  *          Title:  MPI Message independent structures and definitions
39  *                  including System Interface Register Set and
40  *                  scatter/gather formats.
41  *  Creation Date:  June 21, 2006
42  *
43  *  mpi2.h Version:  02.00.46
44  *
45  *  NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
46  *        prefix are for use only on MPI v2.5 products, and must not be used
47  *        with MPI v2.0 products. Unless otherwise noted, names beginning with
48  *        MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
49  *
50  *  Version History
51  *  ---------------
52  *
53  *  Date      Version   Description
54  *  --------  --------  ------------------------------------------------------
55  *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
56  *  06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
57  *  06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
58  *  08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
59  *                      Moved ReplyPostHostIndex register to offset 0x6C of the
60  *                      MPI2_SYSTEM_INTERFACE_REGS and modified the define for
61  *                      MPI2_REPLY_POST_HOST_INDEX_OFFSET.
62  *                      Added union of request descriptors.
63  *                      Added union of reply descriptors.
64  *  10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
65  *                      Added define for MPI2_VERSION_02_00.
66  *                      Fixed the size of the FunctionDependent5 field in the
67  *                      MPI2_DEFAULT_REPLY structure.
68  *  12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
69  *                      Removed the MPI-defined Fault Codes and extended the
70  *                      product specific codes up to 0xEFFF.
71  *                      Added a sixth key value for the WriteSequence register
72  *                      and changed the flush value to 0x0.
73  *                      Added message function codes for Diagnostic Buffer Post
74  *                      and Diagnsotic Release.
75  *                      New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
76  *                      Moved MPI2_VERSION_UNION from mpi2_ioc.h.
77  *  02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
78  *  03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
79  *  05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
80  *                      Added #defines for marking a reply descriptor as unused.
81  *  06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
82  *  10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
83  *                      Moved LUN field defines from mpi2_init.h.
84  *  01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
85  *  05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
86  *                      In all request and reply descriptors, replaced VF_ID
87  *                      field with MSIxIndex field.
88  *                      Removed DevHandle field from
89  *                      MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
90  *                      bytes reserved.
91  *                      Added RAID Accelerator functionality.
92  *  07-30-09  02.00.13  Bumped MPI2_HEADER_VERSION_UNIT.
93  *  10-28-09  02.00.14  Bumped MPI2_HEADER_VERSION_UNIT.
94  *                      Added MSI-x index mask and shift for Reply Post Host
95  *                      Index register.
96  *                      Added function code for Host Based Discovery Action.
97  *  02-10-10  02.00.15  Bumped MPI2_HEADER_VERSION_UNIT.
98  *                      Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
99  *                      Added defines for product-specific range of message
100  *                      function codes, 0xF0 to 0xFF.
101  *  05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
102  *                      Added alternative defines for the SGE Direction bit.
103  *  08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
104  *  11-10-10  02.00.18  Bumped MPI2_HEADER_VERSION_UNIT.
105  *                      Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define.
106  *  02-23-11  02.00.19  Bumped MPI2_HEADER_VERSION_UNIT.
107  *                      Added MPI2_FUNCTION_SEND_HOST_MESSAGE.
108  *  03-09-11  02.00.20  Bumped MPI2_HEADER_VERSION_UNIT.
109  *  05-25-11  02.00.21  Bumped MPI2_HEADER_VERSION_UNIT.
110  *  08-24-11  02.00.22  Bumped MPI2_HEADER_VERSION_UNIT.
111  *  11-18-11  02.00.23  Bumped MPI2_HEADER_VERSION_UNIT.
112  *                      Incorporating additions for MPI v2.5.
113  *  02-06-12  02.00.24  Bumped MPI2_HEADER_VERSION_UNIT.
114  *  03-29-12  02.00.25  Bumped MPI2_HEADER_VERSION_UNIT.
115  *                      Added Hard Reset delay timings.
116  *  07-10-12  02.00.26  Bumped MPI2_HEADER_VERSION_UNIT.
117  *  07-26-12  02.00.27  Bumped MPI2_HEADER_VERSION_UNIT.
118  *  11-27-12  02.00.28  Bumped MPI2_HEADER_VERSION_UNIT.
119  *  12-20-12  02.00.29  Bumped MPI2_HEADER_VERSION_UNIT.
120  *                      Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET.
121  *  04-09-13  02.00.30  Bumped MPI2_HEADER_VERSION_UNIT.
122  *  04-17-13  02.00.31  Bumped MPI2_HEADER_VERSION_UNIT.
123  *  08-19-13  02.00.32  Bumped MPI2_HEADER_VERSION_UNIT.
124  *  12-05-13  02.00.33  Bumped MPI2_HEADER_VERSION_UNIT.
125  *  01-08-14  02.00.34  Bumped MPI2_HEADER_VERSION_UNIT.
126  *  06-13-14  02.00.35  Bumped MPI2_HEADER_VERSION_UNIT.
127  *  11-18-14  02.00.36  Updated copyright information.
128  *                      Bumped MPI2_HEADER_VERSION_UNIT.
129  *  03-16-15  02.00.37  Updated for MPI v2.6.
130  *                      Bumped MPI2_HEADER_VERSION_UNIT.
131  *                      Added Scratchpad registers and
132  *                      AtomicRequestDescriptorPost register to
133  *                      MPI2_SYSTEM_INTERFACE_REGS.
134  *                      Added MPI2_DIAG_SBR_RELOAD.
135  *                      Added MPI2_IOCSTATUS_INSUFFICIENT_POWER.
136  *  03-19-15  02.00.38  Bumped MPI2_HEADER_VERSION_UNIT.
137  *  05-25-15  02.00.39  Bumped MPI2_HEADER_VERSION_UNIT
138  *  08-25-15  02.00.40  Bumped MPI2_HEADER_VERSION_UNIT.
139  *                      Added V7 HostDiagnostic register defines
140  *  12-15-15  02.00.41  Bumped MPI_HEADER_VERSION_UNIT
141  *  01-01-16  02.00.42  Bumped MPI_HEADER_VERSION_UNIT
142  *  04-05-16  02.00.43  Modified  MPI26_DIAG_BOOT_DEVICE_SELECT defines
143  *                      to be unique within first 32 characters.
144  *                      Removed AHCI support.
145  *                      Removed SOP support.
146  *                      Bumped MPI2_HEADER_VERSION_UNIT.
147  *  04-10-16  02.00.44  Bumped MPI2_HEADER_VERSION_UNIT.
148  *  07-06-16  02.00.45  Bumped MPI2_HEADER_VERSION_UNIT.
149  *  09-02-16  02.00.46  Bumped MPI2_HEADER_VERSION_UNIT.
150  *  --------------------------------------------------------------------------
151  */
152 
153 #ifndef MPI2_H
154 #define MPI2_H
155 
156 
157 /*****************************************************************************
158 *
159 *        MPI Version Definitions
160 *
161 *****************************************************************************/
162 
163 #define MPI2_VERSION_MAJOR_MASK             (0xFF00)
164 #define MPI2_VERSION_MAJOR_SHIFT            (8)
165 #define MPI2_VERSION_MINOR_MASK             (0x00FF)
166 #define MPI2_VERSION_MINOR_SHIFT            (0)
167 
168 /* major version for all MPI v2.x */
169 #define MPI2_VERSION_MAJOR                  (0x02)
170 
171 /* minor version for MPI v2.0 compatible products */
172 #define MPI2_VERSION_MINOR                  (0x00)
173 #define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) |   \
174                                       MPI2_VERSION_MINOR)
175 #define MPI2_VERSION_02_00                  (0x0200)
176 
177 
178 /* minor version for MPI v2.5 compatible products */
179 #define MPI25_VERSION_MINOR                 (0x05)
180 #define MPI25_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) |   \
181                                       MPI25_VERSION_MINOR)
182 #define MPI2_VERSION_02_05                  (0x0205)
183 
184 
185 /* minor version for MPI v2.6 compatible products */
186 #define MPI26_VERSION_MINOR                 (0x06)
187 #define MPI26_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) |   \
188                                       MPI26_VERSION_MINOR)
189 #define MPI2_VERSION_02_06                  (0x0206)
190 
191 
192 /* Unit and Dev versioning for this MPI header set */
193 #define MPI2_HEADER_VERSION_UNIT            (0x2E)
194 #define MPI2_HEADER_VERSION_DEV             (0x00)
195 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
196 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
197 #define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
198 #define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
199 #define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV)
200 
201 
202 /*****************************************************************************
203 *
204 *        IOC State Definitions
205 *
206 *****************************************************************************/
207 
208 #define MPI2_IOC_STATE_RESET               (0x00000000)
209 #define MPI2_IOC_STATE_READY               (0x10000000)
210 #define MPI2_IOC_STATE_OPERATIONAL         (0x20000000)
211 #define MPI2_IOC_STATE_FAULT               (0x40000000)
212 
213 #define MPI2_IOC_STATE_MASK                (0xF0000000)
214 #define MPI2_IOC_STATE_SHIFT               (28)
215 
216 /* Fault state range for prodcut specific codes */
217 #define MPI2_FAULT_PRODUCT_SPECIFIC_MIN                 (0x0000)
218 #define MPI2_FAULT_PRODUCT_SPECIFIC_MAX                 (0xEFFF)
219 
220 
221 /*****************************************************************************
222 *
223 *        System Interface Register Definitions
224 *
225 *****************************************************************************/
226 
227 typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS
228 {
229     U32         Doorbell;                   /* 0x00 */
230     U32         WriteSequence;              /* 0x04 */
231     U32         HostDiagnostic;             /* 0x08 */
232     U32         Reserved1;                  /* 0x0C */
233     U32         DiagRWData;                 /* 0x10 */
234     U32         DiagRWAddressLow;           /* 0x14 */
235     U32         DiagRWAddressHigh;          /* 0x18 */
236     U32         Reserved2[5];               /* 0x1C */
237     U32         HostInterruptStatus;        /* 0x30 */
238     U32         HostInterruptMask;          /* 0x34 */
239     U32         DCRData;                    /* 0x38 */
240     U32         DCRAddress;                 /* 0x3C */
241     U32         Reserved3[2];               /* 0x40 */
242     U32         ReplyFreeHostIndex;         /* 0x48 */
243     U32         Reserved4[8];               /* 0x4C */
244     U32         ReplyPostHostIndex;         /* 0x6C */
245     U32         Reserved5;                  /* 0x70 */
246     U32         HCBSize;                    /* 0x74 */
247     U32         HCBAddressLow;              /* 0x78 */
248     U32         HCBAddressHigh;             /* 0x7C */
249     U32         Reserved6[12];              /* 0x80 */
250     U32         Scratchpad[4];              /* 0xB0 */
251     U32         RequestDescriptorPostLow;   /* 0xC0 */
252     U32         RequestDescriptorPostHigh;  /* 0xC4 */
253     U32         AtomicRequestDescriptorPost;/* 0xC8 */ /* MPI v2.6 and later; reserved in earlier versions */
254     U32         Reserved7[13];              /* 0xCC */
255 } MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS,
256   Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t;
257 
258 /*
259  * Defines for working with the Doorbell register.
260  */
261 #define MPI2_DOORBELL_OFFSET                    (0x00000000)
262 
263 /* IOC --> System values */
264 #define MPI2_DOORBELL_USED                      (0x08000000)
265 #define MPI2_DOORBELL_WHO_INIT_MASK             (0x07000000)
266 #define MPI2_DOORBELL_WHO_INIT_SHIFT            (24)
267 #define MPI2_DOORBELL_FAULT_CODE_MASK           (0x0000FFFF)
268 #define MPI2_DOORBELL_DATA_MASK                 (0x0000FFFF)
269 
270 /* System --> IOC values */
271 #define MPI2_DOORBELL_FUNCTION_MASK             (0xFF000000)
272 #define MPI2_DOORBELL_FUNCTION_SHIFT            (24)
273 #define MPI2_DOORBELL_ADD_DWORDS_MASK           (0x00FF0000)
274 #define MPI2_DOORBELL_ADD_DWORDS_SHIFT          (16)
275 
276 
277 /*
278  * Defines for the WriteSequence register
279  */
280 #define MPI2_WRITE_SEQUENCE_OFFSET              (0x00000004)
281 #define MPI2_WRSEQ_KEY_VALUE_MASK               (0x0000000F)
282 #define MPI2_WRSEQ_FLUSH_KEY_VALUE              (0x0)
283 #define MPI2_WRSEQ_1ST_KEY_VALUE                (0xF)
284 #define MPI2_WRSEQ_2ND_KEY_VALUE                (0x4)
285 #define MPI2_WRSEQ_3RD_KEY_VALUE                (0xB)
286 #define MPI2_WRSEQ_4TH_KEY_VALUE                (0x2)
287 #define MPI2_WRSEQ_5TH_KEY_VALUE                (0x7)
288 #define MPI2_WRSEQ_6TH_KEY_VALUE                (0xD)
289 
290 /*
291  * Defines for the HostDiagnostic register
292  */
293 #define MPI2_HOST_DIAGNOSTIC_OFFSET             (0x00000008)
294 
295 #define MPI2_DIAG_SBR_RELOAD                    (0x00002000)
296 
297 #define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK       (0x00001800)
298 #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT    (0x00000000)
299 #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW       (0x00000800)
300 
301 /* Defines for V7A/V7R HostDiagnostic Register */
302 #define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH      (0x00000000)
303 #define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW       (0x00000800)
304 #define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH      (0x00001000)
305 #define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW       (0x00001800)
306 
307 #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG           (0x00000400)
308 #define MPI2_DIAG_FORCE_HCB_ON_RESET            (0x00000200)
309 #define MPI2_DIAG_HCB_MODE                      (0x00000100)
310 #define MPI2_DIAG_DIAG_WRITE_ENABLE             (0x00000080)
311 #define MPI2_DIAG_FLASH_BAD_SIG                 (0x00000040)
312 #define MPI2_DIAG_RESET_HISTORY                 (0x00000020)
313 #define MPI2_DIAG_DIAG_RW_ENABLE                (0x00000010)
314 #define MPI2_DIAG_RESET_ADAPTER                 (0x00000004)
315 #define MPI2_DIAG_HOLD_IOC_RESET                (0x00000002)
316 
317 /*
318  * Offsets for DiagRWData and address
319  */
320 #define MPI2_DIAG_RW_DATA_OFFSET                (0x00000010)
321 #define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET         (0x00000014)
322 #define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET        (0x00000018)
323 
324 /*
325  * Defines for the HostInterruptStatus register
326  */
327 #define MPI2_HOST_INTERRUPT_STATUS_OFFSET       (0x00000030)
328 #define MPI2_HIS_SYS2IOC_DB_STATUS              (0x80000000)
329 #define MPI2_HIS_IOP_DOORBELL_STATUS            MPI2_HIS_SYS2IOC_DB_STATUS
330 #define MPI2_HIS_RESET_IRQ_STATUS               (0x40000000)
331 #define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT     (0x00000008)
332 #define MPI2_HIS_IOC2SYS_DB_STATUS              (0x00000001)
333 #define MPI2_HIS_DOORBELL_INTERRUPT             MPI2_HIS_IOC2SYS_DB_STATUS
334 
335 /*
336  * Defines for the HostInterruptMask register
337  */
338 #define MPI2_HOST_INTERRUPT_MASK_OFFSET         (0x00000034)
339 #define MPI2_HIM_RESET_IRQ_MASK                 (0x40000000)
340 #define MPI2_HIM_REPLY_INT_MASK                 (0x00000008)
341 #define MPI2_HIM_RIM                            MPI2_HIM_REPLY_INT_MASK
342 #define MPI2_HIM_IOC2SYS_DB_MASK                (0x00000001)
343 #define MPI2_HIM_DIM                            MPI2_HIM_IOC2SYS_DB_MASK
344 
345 /*
346  * Offsets for DCRData and address
347  */
348 #define MPI2_DCR_DATA_OFFSET                    (0x00000038)
349 #define MPI2_DCR_ADDRESS_OFFSET                 (0x0000003C)
350 
351 /*
352  * Offset for the Reply Free Queue
353  */
354 #define MPI2_REPLY_FREE_HOST_INDEX_OFFSET       (0x00000048)
355 
356 /*
357  * Defines for the Reply Descriptor Post Queue
358  */
359 #define MPI2_REPLY_POST_HOST_INDEX_OFFSET       (0x0000006C)
360 #define MPI2_REPLY_POST_HOST_INDEX_MASK         (0x00FFFFFF)
361 #define MPI2_RPHI_MSIX_INDEX_MASK               (0xFF000000)
362 #define MPI2_RPHI_MSIX_INDEX_SHIFT              (24)
363 #define MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET  (0x0000030C) /* MPI v2.5 only */
364 
365 
366 /*
367  * Defines for the HCBSize and address
368  */
369 #define MPI2_HCB_SIZE_OFFSET                    (0x00000074)
370 #define MPI2_HCB_SIZE_SIZE_MASK                 (0xFFFFF000)
371 #define MPI2_HCB_SIZE_HCB_ENABLE                (0x00000001)
372 
373 #define MPI2_HCB_ADDRESS_LOW_OFFSET             (0x00000078)
374 #define MPI2_HCB_ADDRESS_HIGH_OFFSET            (0x0000007C)
375 
376 /*
377  * Offsets for the Scratchpad registers
378  */
379 #define MPI26_SCRATCHPAD0_OFFSET                (0x000000B0)
380 #define MPI26_SCRATCHPAD1_OFFSET                (0x000000B4)
381 #define MPI26_SCRATCHPAD2_OFFSET                (0x000000B8)
382 #define MPI26_SCRATCHPAD3_OFFSET                (0x000000BC)
383 
384 /*
385  * Offsets for the Request Descriptor Post Queue
386  */
387 #define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET     (0x000000C0)
388 #define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET    (0x000000C4)
389 #define MPI26_ATOMIC_REQUEST_DESCRIPTOR_POST_OFFSET (0x000000C8)
390 
391 
392 /* Hard Reset delay timings */
393 #define MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC     (50000)
394 #define MPI2_HARD_RESET_PCIE_RESET_READ_WINDOW_MICRO_SEC    (255000)
395 #define MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC    (256000)
396 
397 /*****************************************************************************
398 *
399 *        Message Descriptors
400 *
401 *****************************************************************************/
402 
403 /* Request Descriptors */
404 
405 /* Default Request Descriptor */
406 typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
407 {
408     U8              RequestFlags;               /* 0x00 */
409     U8              MSIxIndex;                  /* 0x01 */
410     U16             SMID;                       /* 0x02 */
411     U16             LMID;                       /* 0x04 */
412     U16             DescriptorTypeDependent;    /* 0x06 */
413 } MPI2_DEFAULT_REQUEST_DESCRIPTOR,
414   MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR,
415   Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t;
416 
417 /* defines for the RequestFlags field */
418 #define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK               (0x1E)
419 #define MPI2_REQ_DESCRIPT_FLAGS_TYPE_RSHIFT             (1)    /* use carefully; values below are pre-shifted left */
420 #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
421 #define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
422 #define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
423 #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
424 #define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)
425 #define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO      (0x0C)
426 #define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED      (0x10)
427 
428 #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
429 
430 
431 /* High Priority Request Descriptor */
432 typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
433 {
434     U8              RequestFlags;               /* 0x00 */
435     U8              MSIxIndex;                  /* 0x01 */
436     U16             SMID;                       /* 0x02 */
437     U16             LMID;                       /* 0x04 */
438     U16             Reserved1;                  /* 0x06 */
439 } MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
440   MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR,
441   Mpi2HighPriorityRequestDescriptor_t,
442   MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t;
443 
444 
445 /* SCSI IO Request Descriptor */
446 typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
447 {
448     U8              RequestFlags;               /* 0x00 */
449     U8              MSIxIndex;                  /* 0x01 */
450     U16             SMID;                       /* 0x02 */
451     U16             LMID;                       /* 0x04 */
452     U16             DevHandle;                  /* 0x06 */
453 } MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
454   MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR,
455   Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t;
456 
457 
458 /* SCSI Target Request Descriptor */
459 typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
460 {
461     U8              RequestFlags;               /* 0x00 */
462     U8              MSIxIndex;                  /* 0x01 */
463     U16             SMID;                       /* 0x02 */
464     U16             LMID;                       /* 0x04 */
465     U16             IoIndex;                    /* 0x06 */
466 } MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
467   MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR,
468   Mpi2SCSITargetRequestDescriptor_t,
469   MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
470 
471 
472 /* RAID Accelerator Request Descriptor */
473 typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR
474 {
475     U8              RequestFlags;               /* 0x00 */
476     U8              MSIxIndex;                  /* 0x01 */
477     U16             SMID;                       /* 0x02 */
478     U16             LMID;                       /* 0x04 */
479     U16             Reserved;                   /* 0x06 */
480 } MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
481   MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
482   Mpi2RAIDAcceleratorRequestDescriptor_t,
483   MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
484 
485 
486 /* Fast Path SCSI IO Request Descriptor */
487 typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
488     MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
489     MPI2_POINTER PTR_MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR,
490     Mpi25FastPathSCSIIORequestDescriptor_t,
491     MPI2_POINTER pMpi25FastPathSCSIIORequestDescriptor_t;
492 
493 
494 /* PCIe Encapsulated Request Descriptor */
495 typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR
496     MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
497     MPI2_POINTER PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR,
498     Mpi26PCIeEncapsulatedRequestDescriptor_t,
499     MPI2_POINTER pMpi26PCIeEncapsulatedRequestDescriptor_t;
500 
501 
502 /* union of Request Descriptors */
503 typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
504 {
505     MPI2_DEFAULT_REQUEST_DESCRIPTOR             Default;
506     MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR       HighPriority;
507     MPI2_SCSI_IO_REQUEST_DESCRIPTOR             SCSIIO;
508     MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR         SCSITarget;
509     MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR          RAIDAccelerator;
510     MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR         FastPathSCSIIO;
511     MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR  PCIeEncapsulated;
512     U64                                         Words;
513 } MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
514   Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
515 
516 
517 /* Atomic Request Descriptors */
518 
519 /*
520  * All Atomic Request Descriptors have the same format, so the following
521  * structure is used for all Atomic Request Descriptors:
522  *      Atomic Default Request Descriptor
523  *      Atomic High Priority Request Descriptor
524  *      Atomic SCSI IO Request Descriptor
525  *      Atomic SCSI Target Request Descriptor
526  *      Atomic RAID Accelerator Request Descriptor
527  *      Atomic Fast Path SCSI IO Request Descriptor
528  *      Atomic PCIe Encapsulated Request Descriptor
529  */
530 
531 /* Atomic Request Descriptor */
532 typedef struct _MPI26_ATOMIC_REQUEST_DESCRIPTOR
533 {
534     U8              RequestFlags;               /* 0x00 */
535     U8              MSIxIndex;                  /* 0x01 */
536     U16             SMID;                       /* 0x02 */
537 } MPI26_ATOMIC_REQUEST_DESCRIPTOR,
538   MPI2_POINTER PTR_MPI26_ATOMIC_REQUEST_DESCRIPTOR,
539   Mpi26AtomicRequestDescriptor_t, MPI2_POINTER pMpi26AtomicRequestDescriptor_t;
540 
541 /* for the RequestFlags field, use the same defines as MPI2_DEFAULT_REQUEST_DESCRIPTOR */
542 
543 
544 /* Reply Descriptors */
545 
546 /* Default Reply Descriptor */
547 typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
548 {
549     U8              ReplyFlags;                 /* 0x00 */
550     U8              MSIxIndex;                  /* 0x01 */
551     U16             DescriptorTypeDependent1;   /* 0x02 */
552     U32             DescriptorTypeDependent2;   /* 0x04 */
553 } MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
554   Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
555 
556 /* defines for the ReplyFlags field */
557 #define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
558 #define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
559 #define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
560 #define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
561 #define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
562 #define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
563 #define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS  (0x06)
564 #define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS  (0x08)
565 #define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)
566 
567 /* values for marking a reply descriptor as unused */
568 #define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
569 #define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK             (0xFFFFFFFF)
570 
571 /* Address Reply Descriptor */
572 typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
573 {
574     U8              ReplyFlags;                 /* 0x00 */
575     U8              MSIxIndex;                  /* 0x01 */
576     U16             SMID;                       /* 0x02 */
577     U32             ReplyFrameAddress;          /* 0x04 */
578 } MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
579   Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t;
580 
581 #define MPI2_ADDRESS_REPLY_SMID_INVALID                 (0x00)
582 
583 
584 /* SCSI IO Success Reply Descriptor */
585 typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
586 {
587     U8              ReplyFlags;                 /* 0x00 */
588     U8              MSIxIndex;                  /* 0x01 */
589     U16             SMID;                       /* 0x02 */
590     U16             TaskTag;                    /* 0x04 */
591     U16             Reserved1;                  /* 0x06 */
592 } MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
593   MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
594   Mpi2SCSIIOSuccessReplyDescriptor_t,
595   MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t;
596 
597 
598 /* TargetAssist Success Reply Descriptor */
599 typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
600 {
601     U8              ReplyFlags;                 /* 0x00 */
602     U8              MSIxIndex;                  /* 0x01 */
603     U16             SMID;                       /* 0x02 */
604     U8              SequenceNumber;             /* 0x04 */
605     U8              Reserved1;                  /* 0x05 */
606     U16             IoIndex;                    /* 0x06 */
607 } MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
608   MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR,
609   Mpi2TargetAssistSuccessReplyDescriptor_t,
610   MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t;
611 
612 
613 /* Target Command Buffer Reply Descriptor */
614 typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
615 {
616     U8              ReplyFlags;                 /* 0x00 */
617     U8              MSIxIndex;                  /* 0x01 */
618     U8              VP_ID;                      /* 0x02 */
619     U8              Flags;                      /* 0x03 */
620     U16             InitiatorDevHandle;         /* 0x04 */
621     U16             IoIndex;                    /* 0x06 */
622 } MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
623   MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR,
624   Mpi2TargetCommandBufferReplyDescriptor_t,
625   MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t;
626 
627 /* defines for Flags field */
628 #define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK     (0x3F)
629 
630 
631 /* RAID Accelerator Success Reply Descriptor */
632 typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
633 {
634     U8              ReplyFlags;                 /* 0x00 */
635     U8              MSIxIndex;                  /* 0x01 */
636     U16             SMID;                       /* 0x02 */
637     U32             Reserved;                   /* 0x04 */
638 } MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
639   MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
640   Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
641   MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
642 
643 
644 /* Fast Path SCSI IO Success Reply Descriptor */
645 typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
646     MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
647     MPI2_POINTER PTR_MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
648     Mpi25FastPathSCSIIOSuccessReplyDescriptor_t,
649     MPI2_POINTER pMpi25FastPathSCSIIOSuccessReplyDescriptor_t;
650 
651 
652 /* PCIe Encapsulated Success Reply Descriptor */
653 typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
654     MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
655     MPI2_POINTER PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR,
656     Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t,
657     MPI2_POINTER pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t;
658 
659 
660 /* union of Reply Descriptors */
661 typedef union _MPI2_REPLY_DESCRIPTORS_UNION
662 {
663     MPI2_DEFAULT_REPLY_DESCRIPTOR                   Default;
664     MPI2_ADDRESS_REPLY_DESCRIPTOR                   AddressReply;
665     MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR           SCSIIOSuccess;
666     MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR      TargetAssistSuccess;
667     MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR     TargetCommandBuffer;
668     MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR  RAIDAcceleratorSuccess;
669     MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR       FastPathSCSIIOSuccess;
670     MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR    PCIeEncapsulatedSuccess;
671     U64                                             Words;
672 } MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
673   Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
674 
675 
676 
677 /*****************************************************************************
678 *
679 *        Message Functions
680 *
681 *****************************************************************************/
682 
683 #define MPI2_FUNCTION_SCSI_IO_REQUEST               (0x00) /* SCSI IO */
684 #define MPI2_FUNCTION_SCSI_TASK_MGMT                (0x01) /* SCSI Task Management */
685 #define MPI2_FUNCTION_IOC_INIT                      (0x02) /* IOC Init */
686 #define MPI2_FUNCTION_IOC_FACTS                     (0x03) /* IOC Facts */
687 #define MPI2_FUNCTION_CONFIG                        (0x04) /* Configuration */
688 #define MPI2_FUNCTION_PORT_FACTS                    (0x05) /* Port Facts */
689 #define MPI2_FUNCTION_PORT_ENABLE                   (0x06) /* Port Enable */
690 #define MPI2_FUNCTION_EVENT_NOTIFICATION            (0x07) /* Event Notification */
691 #define MPI2_FUNCTION_EVENT_ACK                     (0x08) /* Event Acknowledge */
692 #define MPI2_FUNCTION_FW_DOWNLOAD                   (0x09) /* FW Download */
693 #define MPI2_FUNCTION_TARGET_ASSIST                 (0x0B) /* Target Assist */
694 #define MPI2_FUNCTION_TARGET_STATUS_SEND            (0x0C) /* Target Status Send */
695 #define MPI2_FUNCTION_TARGET_MODE_ABORT             (0x0D) /* Target Mode Abort */
696 #define MPI2_FUNCTION_FW_UPLOAD                     (0x12) /* FW Upload */
697 #define MPI2_FUNCTION_RAID_ACTION                   (0x15) /* RAID Action */
698 #define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH      (0x16) /* SCSI IO RAID Passthrough */
699 #define MPI2_FUNCTION_TOOLBOX                       (0x17) /* Toolbox */
700 #define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR      (0x18) /* SCSI Enclosure Processor */
701 #define MPI2_FUNCTION_SMP_PASSTHROUGH               (0x1A) /* SMP Passthrough */
702 #define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL           (0x1B) /* SAS IO Unit Control */ /* for MPI v2.5 and earlier */
703 #define MPI2_FUNCTION_IO_UNIT_CONTROL               (0x1B) /* IO Unit Control */     /* for MPI v2.6 and later */
704 #define MPI2_FUNCTION_SATA_PASSTHROUGH              (0x1C) /* SATA Passthrough */
705 #define MPI2_FUNCTION_DIAG_BUFFER_POST              (0x1D) /* Diagnostic Buffer Post */
706 #define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E) /* Diagnostic Release */
707 #define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24) /* Target Command Buffer Post Base */
708 #define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25) /* Target Command Buffer Post List */
709 #define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C) /* RAID Accelerator */
710 #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F) /* Host Based Discovery Action */
711 #define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30) /* Power Management Control */
712 #define MPI2_FUNCTION_SEND_HOST_MESSAGE             (0x31) /* Send Host Message */
713 #define MPI2_FUNCTION_NVME_ENCAPSULATED             (0x33) /* NVMe Encapsulated (MPI v2.6) */
714 #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0) /* beginning of product-specific range */
715 #define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF) /* end of product-specific range */
716 
717 
718 
719 /* Doorbell functions */
720 #define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET        (0x40)
721 #define MPI2_FUNCTION_HANDSHAKE                     (0x42)
722 
723 
724 /*****************************************************************************
725 *
726 *        IOC Status Values
727 *
728 *****************************************************************************/
729 
730 /* mask for IOCStatus status value */
731 #define MPI2_IOCSTATUS_MASK                     (0x7FFF)
732 
733 /****************************************************************************
734 *  Common IOCStatus values for all replies
735 ****************************************************************************/
736 
737 #define MPI2_IOCSTATUS_SUCCESS                      (0x0000)
738 #define MPI2_IOCSTATUS_INVALID_FUNCTION             (0x0001)
739 #define MPI2_IOCSTATUS_BUSY                         (0x0002)
740 #define MPI2_IOCSTATUS_INVALID_SGL                  (0x0003)
741 #define MPI2_IOCSTATUS_INTERNAL_ERROR               (0x0004)
742 #define MPI2_IOCSTATUS_INVALID_VPID                 (0x0005)
743 #define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES       (0x0006)
744 #define MPI2_IOCSTATUS_INVALID_FIELD                (0x0007)
745 #define MPI2_IOCSTATUS_INVALID_STATE                (0x0008)
746 #define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED       (0x0009)
747 #define MPI2_IOCSTATUS_INSUFFICIENT_POWER           (0x000A) /* MPI v2.6 and later */
748 
749 /****************************************************************************
750 *  Config IOCStatus values
751 ****************************************************************************/
752 
753 #define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION        (0x0020)
754 #define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE          (0x0021)
755 #define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE          (0x0022)
756 #define MPI2_IOCSTATUS_CONFIG_INVALID_DATA          (0x0023)
757 #define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS           (0x0024)
758 #define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT           (0x0025)
759 
760 /****************************************************************************
761 *  SCSI IO Reply
762 ****************************************************************************/
763 
764 #define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR         (0x0040)
765 #define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE       (0x0042)
766 #define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE        (0x0043)
767 #define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN            (0x0044)
768 #define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN           (0x0045)
769 #define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR           (0x0046)
770 #define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR          (0x0047)
771 #define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED         (0x0048)
772 #define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH       (0x0049)
773 #define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED        (0x004A)
774 #define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED          (0x004B)
775 #define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED          (0x004C)
776 
777 /****************************************************************************
778 *  For use by SCSI Initiator and SCSI Target end-to-end data protection
779 ****************************************************************************/
780 
781 #define MPI2_IOCSTATUS_EEDP_GUARD_ERROR             (0x004D)
782 #define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR           (0x004E)
783 #define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR           (0x004F)
784 
785 /****************************************************************************
786 *  SCSI Target values
787 ****************************************************************************/
788 
789 #define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX      (0x0062)
790 #define MPI2_IOCSTATUS_TARGET_ABORTED               (0x0063)
791 #define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE     (0x0064)
792 #define MPI2_IOCSTATUS_TARGET_NO_CONNECTION         (0x0065)
793 #define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH   (0x006A)
794 #define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR     (0x006D)
795 #define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA   (0x006E)
796 #define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT          (0x006F)
797 #define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT       (0x0070)
798 #define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED          (0x0071)
799 
800 /****************************************************************************
801 *  Serial Attached SCSI values
802 ****************************************************************************/
803 
804 #define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED       (0x0090)
805 #define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN         (0x0091)
806 
807 /****************************************************************************
808 *  Diagnostic Buffer Post / Diagnostic Release values
809 ****************************************************************************/
810 
811 #define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED          (0x00A0)
812 
813 /****************************************************************************
814 *  RAID Accelerator values
815 ****************************************************************************/
816 
817 #define MPI2_IOCSTATUS_RAID_ACCEL_ERROR             (0x00B0)
818 
819 /****************************************************************************
820 *  IOCStatus flag to indicate that log info is available
821 ****************************************************************************/
822 
823 #define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE      (0x8000)
824 
825 /****************************************************************************
826 *  IOCLogInfo Types
827 ****************************************************************************/
828 
829 #define MPI2_IOCLOGINFO_TYPE_MASK               (0xF0000000)
830 #define MPI2_IOCLOGINFO_TYPE_SHIFT              (28)
831 #define MPI2_IOCLOGINFO_TYPE_NONE               (0x0)
832 #define MPI2_IOCLOGINFO_TYPE_SCSI               (0x1)
833 #define MPI2_IOCLOGINFO_TYPE_FC                 (0x2)
834 #define MPI2_IOCLOGINFO_TYPE_SAS                (0x3)
835 #define MPI2_IOCLOGINFO_TYPE_ISCSI              (0x4)
836 #define MPI2_IOCLOGINFO_LOG_DATA_MASK           (0x0FFFFFFF)
837 
838 
839 /*****************************************************************************
840 *
841 *        Standard Message Structures
842 *
843 *****************************************************************************/
844 
845 /****************************************************************************
846 * Request Message Header for all request messages
847 ****************************************************************************/
848 
849 typedef struct _MPI2_REQUEST_HEADER
850 {
851     U16             FunctionDependent1;         /* 0x00 */
852     U8              ChainOffset;                /* 0x02 */
853     U8              Function;                   /* 0x03 */
854     U16             FunctionDependent2;         /* 0x04 */
855     U8              FunctionDependent3;         /* 0x06 */
856     U8              MsgFlags;                   /* 0x07 */
857     U8              VP_ID;                      /* 0x08 */
858     U8              VF_ID;                      /* 0x09 */
859     U16             Reserved1;                  /* 0x0A */
860 } MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER,
861   MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t;
862 
863 
864 /****************************************************************************
865 *  Default Reply
866 ****************************************************************************/
867 
868 typedef struct _MPI2_DEFAULT_REPLY
869 {
870     U16             FunctionDependent1;         /* 0x00 */
871     U8              MsgLength;                  /* 0x02 */
872     U8              Function;                   /* 0x03 */
873     U16             FunctionDependent2;         /* 0x04 */
874     U8              FunctionDependent3;         /* 0x06 */
875     U8              MsgFlags;                   /* 0x07 */
876     U8              VP_ID;                      /* 0x08 */
877     U8              VF_ID;                      /* 0x09 */
878     U16             Reserved1;                  /* 0x0A */
879     U16             FunctionDependent5;         /* 0x0C */
880     U16             IOCStatus;                  /* 0x0E */
881     U32             IOCLogInfo;                 /* 0x10 */
882 } MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY,
883   MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t;
884 
885 
886 /* common version structure/union used in messages and configuration pages */
887 
888 typedef struct _MPI2_VERSION_STRUCT
889 {
890     U8                      Dev;                        /* 0x00 */
891     U8                      Unit;                       /* 0x01 */
892     U8                      Minor;                      /* 0x02 */
893     U8                      Major;                      /* 0x03 */
894 } MPI2_VERSION_STRUCT;
895 
896 typedef union _MPI2_VERSION_UNION
897 {
898     MPI2_VERSION_STRUCT     Struct;
899     U32                     Word;
900 } MPI2_VERSION_UNION;
901 
902 
903 /* LUN field defines, common to many structures */
904 #define MPI2_LUN_FIRST_LEVEL_ADDRESSING             (0x0000FFFF)
905 #define MPI2_LUN_SECOND_LEVEL_ADDRESSING            (0xFFFF0000)
906 #define MPI2_LUN_THIRD_LEVEL_ADDRESSING             (0x0000FFFF)
907 #define MPI2_LUN_FOURTH_LEVEL_ADDRESSING            (0xFFFF0000)
908 #define MPI2_LUN_LEVEL_1_WORD                       (0xFF00)
909 #define MPI2_LUN_LEVEL_1_DWORD                      (0x0000FF00)
910 
911 
912 /*****************************************************************************
913 *
914 *        Fusion-MPT MPI Scatter Gather Elements
915 *
916 *****************************************************************************/
917 
918 /****************************************************************************
919 *  MPI Simple Element structures
920 ****************************************************************************/
921 
922 typedef struct _MPI2_SGE_SIMPLE32
923 {
924     U32                     FlagsLength;
925     U32                     Address;
926 } MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32,
927   Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t;
928 
929 typedef struct _MPI2_SGE_SIMPLE64
930 {
931     U32                     FlagsLength;
932     U64                     Address;
933 } MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64,
934   Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t;
935 
936 typedef struct _MPI2_SGE_SIMPLE_UNION
937 {
938     U32                     FlagsLength;
939     union
940     {
941         U32                 Address32;
942         U64                 Address64;
943     } u;
944 } MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION,
945   Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t;
946 
947 
948 /****************************************************************************
949 *  MPI Chain Element structures - for MPI v2.0 products only
950 ****************************************************************************/
951 
952 typedef struct _MPI2_SGE_CHAIN32
953 {
954     U16                     Length;
955     U8                      NextChainOffset;
956     U8                      Flags;
957     U32                     Address;
958 } MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32,
959   Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t;
960 
961 typedef struct _MPI2_SGE_CHAIN64
962 {
963     U16                     Length;
964     U8                      NextChainOffset;
965     U8                      Flags;
966     U64                     Address;
967 } MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64,
968   Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t;
969 
970 typedef struct _MPI2_SGE_CHAIN_UNION
971 {
972     U16                     Length;
973     U8                      NextChainOffset;
974     U8                      Flags;
975     union
976     {
977         U32                 Address32;
978         U64                 Address64;
979     } u;
980 } MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION,
981   Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t;
982 
983 
984 /****************************************************************************
985 *  MPI Transaction Context Element structures - for MPI v2.0 products only
986 ****************************************************************************/
987 
988 typedef struct _MPI2_SGE_TRANSACTION32
989 {
990     U8                      Reserved;
991     U8                      ContextSize;
992     U8                      DetailsLength;
993     U8                      Flags;
994     U32                     TransactionContext[1];
995     U32                     TransactionDetails[1];
996 } MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32,
997   Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t;
998 
999 typedef struct _MPI2_SGE_TRANSACTION64
1000 {
1001     U8                      Reserved;
1002     U8                      ContextSize;
1003     U8                      DetailsLength;
1004     U8                      Flags;
1005     U32                     TransactionContext[2];
1006     U32                     TransactionDetails[1];
1007 } MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64,
1008   Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t;
1009 
1010 typedef struct _MPI2_SGE_TRANSACTION96
1011 {
1012     U8                      Reserved;
1013     U8                      ContextSize;
1014     U8                      DetailsLength;
1015     U8                      Flags;
1016     U32                     TransactionContext[3];
1017     U32                     TransactionDetails[1];
1018 } MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96,
1019   Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t;
1020 
1021 typedef struct _MPI2_SGE_TRANSACTION128
1022 {
1023     U8                      Reserved;
1024     U8                      ContextSize;
1025     U8                      DetailsLength;
1026     U8                      Flags;
1027     U32                     TransactionContext[4];
1028     U32                     TransactionDetails[1];
1029 } MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128,
1030   Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128;
1031 
1032 typedef struct _MPI2_SGE_TRANSACTION_UNION
1033 {
1034     U8                      Reserved;
1035     U8                      ContextSize;
1036     U8                      DetailsLength;
1037     U8                      Flags;
1038     union
1039     {
1040         U32                 TransactionContext32[1];
1041         U32                 TransactionContext64[2];
1042         U32                 TransactionContext96[3];
1043         U32                 TransactionContext128[4];
1044     } u;
1045     U32                     TransactionDetails[1];
1046 } MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION,
1047   Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t;
1048 
1049 
1050 /****************************************************************************
1051 *  MPI SGE union for IO SGL's - for MPI v2.0 products only
1052 ****************************************************************************/
1053 
1054 typedef struct _MPI2_MPI_SGE_IO_UNION
1055 {
1056     union
1057     {
1058         MPI2_SGE_SIMPLE_UNION   Simple;
1059         MPI2_SGE_CHAIN_UNION    Chain;
1060     } u;
1061 } MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION,
1062   Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t;
1063 
1064 
1065 /****************************************************************************
1066 *  MPI SGE union for SGL's with Simple and Transaction elements - for MPI v2.0 products only
1067 ****************************************************************************/
1068 
1069 typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION
1070 {
1071     union
1072     {
1073         MPI2_SGE_SIMPLE_UNION       Simple;
1074         MPI2_SGE_TRANSACTION_UNION  Transaction;
1075     } u;
1076 } MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION,
1077   Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t;
1078 
1079 
1080 /****************************************************************************
1081 *  All MPI SGE types union
1082 ****************************************************************************/
1083 
1084 typedef struct _MPI2_MPI_SGE_UNION
1085 {
1086     union
1087     {
1088         MPI2_SGE_SIMPLE_UNION       Simple;
1089         MPI2_SGE_CHAIN_UNION        Chain;
1090         MPI2_SGE_TRANSACTION_UNION  Transaction;
1091     } u;
1092 } MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION,
1093   Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t;
1094 
1095 
1096 /****************************************************************************
1097 *  MPI SGE field definition and masks
1098 ****************************************************************************/
1099 
1100 /* Flags field bit definitions */
1101 
1102 #define MPI2_SGE_FLAGS_LAST_ELEMENT             (0x80)
1103 #define MPI2_SGE_FLAGS_END_OF_BUFFER            (0x40)
1104 #define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK        (0x30)
1105 #define MPI2_SGE_FLAGS_LOCAL_ADDRESS            (0x08)
1106 #define MPI2_SGE_FLAGS_DIRECTION                (0x04)
1107 #define MPI2_SGE_FLAGS_ADDRESS_SIZE             (0x02)
1108 #define MPI2_SGE_FLAGS_END_OF_LIST              (0x01)
1109 
1110 #define MPI2_SGE_FLAGS_SHIFT                    (24)
1111 
1112 #define MPI2_SGE_LENGTH_MASK                    (0x00FFFFFF)
1113 #define MPI2_SGE_CHAIN_LENGTH_MASK              (0x0000FFFF)
1114 
1115 /* Element Type */
1116 
1117 #define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT      (0x00) /* for MPI v2.0 products only */
1118 #define MPI2_SGE_FLAGS_SIMPLE_ELEMENT           (0x10)
1119 #define MPI2_SGE_FLAGS_CHAIN_ELEMENT            (0x30) /* for MPI v2.0 products only */
1120 #define MPI2_SGE_FLAGS_ELEMENT_MASK             (0x30)
1121 
1122 /* Address location */
1123 
1124 #define MPI2_SGE_FLAGS_SYSTEM_ADDRESS           (0x00)
1125 
1126 /* Direction */
1127 
1128 #define MPI2_SGE_FLAGS_IOC_TO_HOST              (0x00)
1129 #define MPI2_SGE_FLAGS_HOST_TO_IOC              (0x04)
1130 
1131 #define MPI2_SGE_FLAGS_DEST                     (MPI2_SGE_FLAGS_IOC_TO_HOST)
1132 #define MPI2_SGE_FLAGS_SOURCE                   (MPI2_SGE_FLAGS_HOST_TO_IOC)
1133 
1134 /* Address Size */
1135 
1136 #define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
1137 #define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)
1138 
1139 /* Context Size */
1140 
1141 #define MPI2_SGE_FLAGS_32_BIT_CONTEXT           (0x00)
1142 #define MPI2_SGE_FLAGS_64_BIT_CONTEXT           (0x02)
1143 #define MPI2_SGE_FLAGS_96_BIT_CONTEXT           (0x04)
1144 #define MPI2_SGE_FLAGS_128_BIT_CONTEXT          (0x06)
1145 
1146 #define MPI2_SGE_CHAIN_OFFSET_MASK              (0x00FF0000)
1147 #define MPI2_SGE_CHAIN_OFFSET_SHIFT             (16)
1148 
1149 /****************************************************************************
1150 *  MPI SGE operation Macros
1151 ****************************************************************************/
1152 
1153 /* SIMPLE FlagsLength manipulations... */
1154 #define MPI2_SGE_SET_FLAGS(f)          ((U32)(f) << MPI2_SGE_FLAGS_SHIFT)
1155 #define MPI2_SGE_GET_FLAGS(f)          (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT)
1156 #define MPI2_SGE_LENGTH(f)             ((f) & MPI2_SGE_LENGTH_MASK)
1157 #define MPI2_SGE_CHAIN_LENGTH(f)       ((f) & MPI2_SGE_CHAIN_LENGTH_MASK)
1158 
1159 #define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l))
1160 
1161 #define MPI2_pSGE_GET_FLAGS(psg)            MPI2_SGE_GET_FLAGS((psg)->FlagsLength)
1162 #define MPI2_pSGE_GET_LENGTH(psg)           MPI2_SGE_LENGTH((psg)->FlagsLength)
1163 #define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l)
1164 
1165 /* CAUTION - The following are READ-MODIFY-WRITE! */
1166 #define MPI2_pSGE_SET_FLAGS(psg,f)      (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f)
1167 #define MPI2_pSGE_SET_LENGTH(psg,l)     (psg)->FlagsLength |= MPI2_SGE_LENGTH(l)
1168 
1169 #define MPI2_GET_CHAIN_OFFSET(x)    ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT)
1170 
1171 
1172 /*****************************************************************************
1173 *
1174 *        Fusion-MPT IEEE Scatter Gather Elements
1175 *
1176 *****************************************************************************/
1177 
1178 /****************************************************************************
1179 *  IEEE Simple Element structures
1180 ****************************************************************************/
1181 
1182 /* MPI2_IEEE_SGE_SIMPLE32 is for MPI v2.0 products only */
1183 typedef struct _MPI2_IEEE_SGE_SIMPLE32
1184 {
1185     U32                     Address;
1186     U32                     FlagsLength;
1187 } MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32,
1188   Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t;
1189 
1190 typedef struct _MPI2_IEEE_SGE_SIMPLE64
1191 {
1192     U64                     Address;
1193     U32                     Length;
1194     U16                     Reserved1;
1195     U8                      Reserved2;
1196     U8                      Flags;
1197 } MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64,
1198   Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t;
1199 
1200 typedef union _MPI2_IEEE_SGE_SIMPLE_UNION
1201 {
1202     MPI2_IEEE_SGE_SIMPLE32  Simple32;
1203     MPI2_IEEE_SGE_SIMPLE64  Simple64;
1204 } MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION,
1205   Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t;
1206 
1207 
1208 /****************************************************************************
1209 *  IEEE Chain Element structures
1210 ****************************************************************************/
1211 
1212 /* MPI2_IEEE_SGE_CHAIN32 is for MPI v2.0 products only */
1213 typedef MPI2_IEEE_SGE_SIMPLE32  MPI2_IEEE_SGE_CHAIN32;
1214 
1215 /* MPI2_IEEE_SGE_CHAIN64 is for MPI v2.0 products only */
1216 typedef MPI2_IEEE_SGE_SIMPLE64  MPI2_IEEE_SGE_CHAIN64;
1217 
1218 typedef union _MPI2_IEEE_SGE_CHAIN_UNION
1219 {
1220     MPI2_IEEE_SGE_CHAIN32   Chain32;
1221     MPI2_IEEE_SGE_CHAIN64   Chain64;
1222 } MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION,
1223   Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t;
1224 
1225 /* MPI25_IEEE_SGE_CHAIN64 is for MPI v2.5 and later */
1226 typedef struct _MPI25_IEEE_SGE_CHAIN64
1227 {
1228     U64                     Address;
1229     U32                     Length;
1230     U16                     Reserved1;
1231     U8                      NextChainOffset;
1232     U8                      Flags;
1233 } MPI25_IEEE_SGE_CHAIN64, MPI2_POINTER PTR_MPI25_IEEE_SGE_CHAIN64,
1234   Mpi25IeeeSgeChain64_t, MPI2_POINTER pMpi25IeeeSgeChain64_t;
1235 
1236 
1237 /****************************************************************************
1238 *  All IEEE SGE types union
1239 ****************************************************************************/
1240 
1241 /* MPI2_IEEE_SGE_UNION is for MPI v2.0 products only */
1242 typedef struct _MPI2_IEEE_SGE_UNION
1243 {
1244     union
1245     {
1246         MPI2_IEEE_SGE_SIMPLE_UNION  Simple;
1247         MPI2_IEEE_SGE_CHAIN_UNION   Chain;
1248     } u;
1249 } MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION,
1250   Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t;
1251 
1252 
1253 /****************************************************************************
1254 *  IEEE SGE union for IO SGL's
1255 ****************************************************************************/
1256 
1257 typedef union _MPI25_SGE_IO_UNION
1258 {
1259     MPI2_IEEE_SGE_SIMPLE64      IeeeSimple;
1260     MPI25_IEEE_SGE_CHAIN64      IeeeChain;
1261 } MPI25_SGE_IO_UNION, MPI2_POINTER PTR_MPI25_SGE_IO_UNION,
1262   Mpi25SGEIOUnion_t, MPI2_POINTER pMpi25SGEIOUnion_t;
1263 
1264 
1265 /****************************************************************************
1266 *  IEEE SGE field definitions and masks
1267 ****************************************************************************/
1268 
1269 /* Flags field bit definitions */
1270 
1271 #define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK   (0x80)
1272 #define MPI25_IEEE_SGE_FLAGS_END_OF_LIST        (0x40)
1273 
1274 #define MPI2_IEEE32_SGE_FLAGS_SHIFT             (24)
1275 
1276 #define MPI2_IEEE32_SGE_LENGTH_MASK             (0x00FFFFFF)
1277 
1278 /* Element Type */
1279 
1280 #define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT      (0x00)
1281 #define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT       (0x80)
1282 
1283 /* Next Segment Format */
1284 
1285 #define MPI26_IEEE_SGE_FLAGS_NSF_MASK           (0x1C)
1286 #define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE       (0x00)
1287 #define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP       (0x08)
1288 #define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL       (0x10)
1289 
1290 /* Data Location Address Space */
1291 
1292 #define MPI2_IEEE_SGE_FLAGS_ADDR_MASK           (0x03)
1293 #define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR         (0x00) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5 and later, use in IEEE Simple or Chain element */
1294 #define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR         (0x01) /* use in IEEE Simple Element only */
1295 #define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR         (0x02)
1296 #define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03) /* for MPI v2.0, use in IEEE Simple Element only; for MPI v2.5, use in IEEE Simple or Chain element */
1297 #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR   (0x03) /* use in MPI v2.0 IEEE Chain Element only */
1298 #define MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR   (MPI2_IEEE_SGE_FLAGS_SYSTEMPLBPCI_ADDR) /* typo in name */
1299 
1300 #define MPI26_IEEE_SGE_FLAGS_IOCCTL_ADDR        (0x02) /* for MPI v2.6 only */
1301 
1302 /****************************************************************************
1303 *  IEEE SGE operation Macros
1304 ****************************************************************************/
1305 
1306 /* SIMPLE FlagsLength manipulations... */
1307 #define MPI2_IEEE32_SGE_SET_FLAGS(f)     ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT)
1308 #define MPI2_IEEE32_SGE_GET_FLAGS(f)     (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT)
1309 #define MPI2_IEEE32_SGE_LENGTH(f)        ((f) & MPI2_IEEE32_SGE_LENGTH_MASK)
1310 
1311 #define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l)      (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l))
1312 
1313 #define MPI2_IEEE32_pSGE_GET_FLAGS(psg)             MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength)
1314 #define MPI2_IEEE32_pSGE_GET_LENGTH(psg)            MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength)
1315 #define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l)  (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l)
1316 
1317 /* CAUTION - The following are READ-MODIFY-WRITE! */
1318 #define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f)    (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f)
1319 #define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l)   (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l)
1320 
1321 
1322 
1323 /*****************************************************************************
1324 *
1325 *        Fusion-MPT MPI/IEEE Scatter Gather Unions
1326 *
1327 *****************************************************************************/
1328 
1329 typedef union _MPI2_SIMPLE_SGE_UNION
1330 {
1331     MPI2_SGE_SIMPLE_UNION       MpiSimple;
1332     MPI2_IEEE_SGE_SIMPLE_UNION  IeeeSimple;
1333 } MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION,
1334   Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t;
1335 
1336 
1337 typedef union _MPI2_SGE_IO_UNION
1338 {
1339     MPI2_SGE_SIMPLE_UNION       MpiSimple;
1340     MPI2_SGE_CHAIN_UNION        MpiChain;
1341     MPI2_IEEE_SGE_SIMPLE_UNION  IeeeSimple;
1342     MPI2_IEEE_SGE_CHAIN_UNION   IeeeChain;
1343 } MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION,
1344   Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t;
1345 
1346 
1347 /****************************************************************************
1348 *
1349 *  Values for SGLFlags field, used in many request messages with an SGL
1350 *
1351 ****************************************************************************/
1352 
1353 /* values for MPI SGL Data Location Address Space subfield */
1354 #define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK            (0x0C)
1355 #define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE          (0x00)
1356 #define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE          (0x04)
1357 #define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE          (0x08) /* only for MPI v2.5 and earlier */
1358 #define MPI26_SGLFLAGS_IOCPLB_ADDRESS_SPACE         (0x08) /* only for MPI v2.6 */
1359 #define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE       (0x0C) /* only for MPI v2.5 and earlier */
1360 /* values for SGL Type subfield */
1361 #define MPI2_SGLFLAGS_SGL_TYPE_MASK                 (0x03)
1362 #define MPI2_SGLFLAGS_SGL_TYPE_MPI                  (0x00)
1363 #define MPI2_SGLFLAGS_SGL_TYPE_IEEE32               (0x01) /* MPI v2.0 products only */
1364 #define MPI2_SGLFLAGS_SGL_TYPE_IEEE64               (0x02)
1365 
1366 
1367 #endif
1368 
1369