1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Novatek NT35950 DriverIC panels driver
4 *
5 * Copyright (c) 2021 AngeloGioacchino Del Regno
6 * <angelogioacchino.delregno@somainline.org>
7 */
8 #include <linux/delay.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/module.h>
11 #include <linux/of.h>
12 #include <linux/of_graph.h>
13 #include <linux/regulator/consumer.h>
14
15 #include <drm/drm_connector.h>
16 #include <drm/drm_crtc.h>
17 #include <drm/drm_mipi_dsi.h>
18 #include <drm/drm_modes.h>
19 #include <drm/drm_panel.h>
20
21 #define MCS_CMD_MAUCCTR 0xf0 /* Manufacturer command enable */
22 #define MCS_PARAM_SCALER_FUNCTION 0x58 /* Scale-up function */
23 #define MCS_PARAM_SCALEUP_MODE 0xc9
24 #define MCS_SCALEUP_SIMPLE 0x0
25 #define MCS_SCALEUP_BILINEAR BIT(0)
26 #define MCS_SCALEUP_DUPLICATE (BIT(0) | BIT(4))
27
28 /* VESA Display Stream Compression param */
29 #define MCS_PARAM_VESA_DSC_ON 0x03
30
31 /* Data Compression mode */
32 #define MCS_PARAM_DATA_COMPRESSION 0x90
33 #define MCS_DATA_COMPRESSION_NONE 0x00
34 #define MCS_DATA_COMPRESSION_FBC 0x02
35 #define MCS_DATA_COMPRESSION_DSC 0x03
36
37 /* Display Output control */
38 #define MCS_PARAM_DISP_OUTPUT_CTRL 0xb4
39 #define MCS_DISP_OUT_SRAM_EN BIT(0)
40 #define MCS_DISP_OUT_VIDEO_MODE BIT(4)
41
42 /* VESA Display Stream Compression setting */
43 #define MCS_PARAM_VESA_DSC_SETTING 0xc0
44
45 /* SubPixel Rendering (SPR) */
46 #define MCS_PARAM_SPR_EN 0xe3
47 #define MCS_PARAM_SPR_MODE 0xef
48 #define MCS_SPR_MODE_YYG_RAINBOW_RGB 0x01
49
50 #define NT35950_VREG_MAX 4
51
52 struct nt35950 {
53 struct drm_panel panel;
54 struct drm_connector *connector;
55 struct mipi_dsi_device *dsi[2];
56 struct regulator_bulk_data vregs[NT35950_VREG_MAX];
57 struct gpio_desc *reset_gpio;
58 const struct nt35950_panel_desc *desc;
59
60 int cur_mode;
61 u8 last_page;
62 };
63
64 struct nt35950_panel_mode {
65 const struct drm_display_mode mode;
66
67 bool enable_sram;
68 bool is_video_mode;
69 u8 scaler_on;
70 u8 scaler_mode;
71 u8 compression;
72 u8 spr_en;
73 u8 spr_mode;
74 };
75
76 struct nt35950_panel_desc {
77 const char *model_name;
78 const struct mipi_dsi_device_info dsi_info;
79 const struct nt35950_panel_mode *mode_data;
80
81 bool is_dual_dsi;
82 u8 num_lanes;
83 u8 num_modes;
84 };
85
to_nt35950(struct drm_panel * panel)86 static inline struct nt35950 *to_nt35950(struct drm_panel *panel)
87 {
88 return container_of(panel, struct nt35950, panel);
89 }
90
nt35950_reset(struct nt35950 * nt)91 static void nt35950_reset(struct nt35950 *nt)
92 {
93 gpiod_set_value_cansleep(nt->reset_gpio, 1);
94 usleep_range(12000, 13000);
95 gpiod_set_value_cansleep(nt->reset_gpio, 0);
96 usleep_range(300, 400);
97 gpiod_set_value_cansleep(nt->reset_gpio, 1);
98 usleep_range(12000, 13000);
99 }
100
101 /*
102 * nt35950_set_cmd2_page - Select manufacturer control (CMD2) page
103 * @dsi_ctx: context for mipi_dsi functions
104 * @nt: Main driver structure
105 * @page: Page number (0-7)
106 */
nt35950_set_cmd2_page(struct mipi_dsi_multi_context * dsi_ctx,struct nt35950 * nt,u8 page)107 static void nt35950_set_cmd2_page(struct mipi_dsi_multi_context *dsi_ctx,
108 struct nt35950 *nt, u8 page)
109 {
110 const u8 mauc_cmd2_page[] = { MCS_CMD_MAUCCTR, 0x55, 0xaa, 0x52,
111 0x08, page };
112
113 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, mauc_cmd2_page,
114 ARRAY_SIZE(mauc_cmd2_page));
115 if (!dsi_ctx->accum_err)
116 nt->last_page = page;
117 }
118
119 /*
120 * nt35950_set_data_compression - Set data compression mode
121 * @dsi_ctx: context for mipi_dsi functions
122 * @nt: Main driver structure
123 * @comp_mode: Compression mode
124 */
nt35950_set_data_compression(struct mipi_dsi_multi_context * dsi_ctx,struct nt35950 * nt,u8 comp_mode)125 static void nt35950_set_data_compression(struct mipi_dsi_multi_context *dsi_ctx,
126 struct nt35950 *nt, u8 comp_mode)
127 {
128 u8 cmd_data_compression[] = { MCS_PARAM_DATA_COMPRESSION, comp_mode };
129 u8 cmd_vesa_dsc_on[] = { MCS_PARAM_VESA_DSC_ON, !!comp_mode };
130 u8 cmd_vesa_dsc_setting[] = { MCS_PARAM_VESA_DSC_SETTING, 0x03 };
131 u8 last_page = nt->last_page;
132
133 /* Set CMD2 Page 0 if we're not there yet */
134 if (last_page != 0)
135 nt35950_set_cmd2_page(dsi_ctx, nt, 0);
136
137 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_data_compression,
138 ARRAY_SIZE(cmd_data_compression));
139 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_vesa_dsc_on,
140 ARRAY_SIZE(cmd_vesa_dsc_on));
141
142 /* Set the vesa dsc setting on Page 4 */
143 nt35950_set_cmd2_page(dsi_ctx, nt, 4);
144
145 /* Display Stream Compression setting, always 0x03 */
146 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_vesa_dsc_setting,
147 ARRAY_SIZE(cmd_vesa_dsc_setting));
148
149 /* Get back to the previously set page */
150 nt35950_set_cmd2_page(dsi_ctx, nt, last_page);
151 }
152
153 /*
154 * nt35950_set_scaler - Enable/disable resolution upscaling
155 * @dsi_ctx: context for mipi_dsi functions
156 * @scale_up: Scale up function control
157 */
nt35950_set_scaler(struct mipi_dsi_multi_context * dsi_ctx,u8 scale_up)158 static void nt35950_set_scaler(struct mipi_dsi_multi_context *dsi_ctx,
159 u8 scale_up)
160 {
161 u8 cmd_scaler[] = { MCS_PARAM_SCALER_FUNCTION, scale_up };
162
163 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_scaler,
164 ARRAY_SIZE(cmd_scaler));
165 }
166
167 /*
168 * nt35950_set_scale_mode - Resolution upscaling mode
169 * @dsi_ctx: context for mipi_dsi functions
170 * @mode: Scaler mode (MCS_DATA_COMPRESSION_*)
171 */
nt35950_set_scale_mode(struct mipi_dsi_multi_context * dsi_ctx,u8 mode)172 static void nt35950_set_scale_mode(struct mipi_dsi_multi_context *dsi_ctx,
173 u8 mode)
174 {
175 u8 cmd_scaler[] = { MCS_PARAM_SCALEUP_MODE, mode };
176
177 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_scaler,
178 ARRAY_SIZE(cmd_scaler));
179 }
180
181 /*
182 * nt35950_inject_black_image - Display a completely black image
183 * @dsi_ctx: context for mipi_dsi functions
184 *
185 * After IC setup, the attached panel may show random data
186 * due to driveric behavior changes (resolution, compression,
187 * scaling, etc). This function, called after parameters setup,
188 * makes the driver ic to output a completely black image to
189 * the display.
190 * It makes sense to push a black image before sending the sleep-out
191 * and display-on commands.
192 */
nt35950_inject_black_image(struct mipi_dsi_multi_context * dsi_ctx)193 static void nt35950_inject_black_image(struct mipi_dsi_multi_context *dsi_ctx)
194 {
195 const u8 cmd0_black_img[] = { 0x6f, 0x01 };
196 const u8 cmd1_black_img[] = { 0xf3, 0x10 };
197 u8 cmd_test[] = { 0xff, 0xaa, 0x55, 0xa5, 0x80 };
198
199 /* Enable test command */
200 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_test, ARRAY_SIZE(cmd_test));
201
202 /* Send a black image */
203 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd0_black_img,
204 ARRAY_SIZE(cmd0_black_img));
205 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd1_black_img,
206 ARRAY_SIZE(cmd1_black_img));
207
208 /* Disable test command */
209 cmd_test[ARRAY_SIZE(cmd_test) - 1] = 0x00;
210 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_test, ARRAY_SIZE(cmd_test));
211 }
212
213 /*
214 * nt35950_set_dispout - Set Display Output register parameters
215 * @nt: Main driver structure
216 * @dsi_ctx: context for mipi_dsi functions
217 */
nt35950_set_dispout(struct mipi_dsi_multi_context * dsi_ctx,struct nt35950 * nt)218 static void nt35950_set_dispout(struct mipi_dsi_multi_context *dsi_ctx,
219 struct nt35950 *nt)
220 {
221 u8 cmd_dispout[] = { MCS_PARAM_DISP_OUTPUT_CTRL, 0x00 };
222 const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
223
224 if (mode_data[nt->cur_mode].is_video_mode)
225 cmd_dispout[1] |= MCS_DISP_OUT_VIDEO_MODE;
226 if (mode_data[nt->cur_mode].enable_sram)
227 cmd_dispout[1] |= MCS_DISP_OUT_SRAM_EN;
228
229 mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_dispout,
230 ARRAY_SIZE(cmd_dispout));
231 }
232
nt35950_get_current_mode(struct nt35950 * nt)233 static int nt35950_get_current_mode(struct nt35950 *nt)
234 {
235 struct drm_connector *connector = nt->connector;
236 struct drm_crtc_state *crtc_state;
237 int i;
238
239 /* Return the default (first) mode if no info available yet */
240 if (!connector->state || !connector->state->crtc)
241 return 0;
242
243 crtc_state = connector->state->crtc->state;
244
245 for (i = 0; i < nt->desc->num_modes; i++) {
246 if (drm_mode_match(&crtc_state->mode,
247 &nt->desc->mode_data[i].mode,
248 DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK))
249 return i;
250 }
251
252 return 0;
253 }
254
nt35950_on(struct nt35950 * nt)255 static int nt35950_on(struct nt35950 *nt)
256 {
257 const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
258 struct mipi_dsi_device *dsi = nt->dsi[0];
259 struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
260
261 nt->cur_mode = nt35950_get_current_mode(nt);
262 nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
263 nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
264
265 nt35950_set_cmd2_page(&dsi_ctx, nt, 0);
266 nt35950_set_data_compression(&dsi_ctx, nt, mode_data[nt->cur_mode].compression);
267 nt35950_set_scale_mode(&dsi_ctx, mode_data[nt->cur_mode].scaler_mode);
268 nt35950_set_scaler(&dsi_ctx, mode_data[nt->cur_mode].scaler_on);
269 nt35950_set_dispout(&dsi_ctx, nt);
270
271 mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
272 mipi_dsi_dcs_set_tear_scanline_multi(&dsi_ctx, 0);
273
274 /* CMD2 Page 1 */
275 nt35950_set_cmd2_page(&dsi_ctx, nt, 1);
276
277 /* Unknown command */
278 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd4, 0x88, 0x88);
279
280 /* CMD2 Page 7 */
281 nt35950_set_cmd2_page(&dsi_ctx, nt, 7);
282
283 /* Enable SubPixel Rendering */
284 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_EN, 0x01);
285
286 /* SPR Mode: YYG Rainbow-RGB */
287 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_MODE,
288 MCS_SPR_MODE_YYG_RAINBOW_RGB);
289
290 /* CMD3 */
291 nt35950_inject_black_image(&dsi_ctx);
292 mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
293 mipi_dsi_msleep(&dsi_ctx, 120);
294
295 mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
296 mipi_dsi_msleep(&dsi_ctx, 120);
297
298 if (dsi_ctx.accum_err)
299 return dsi_ctx.accum_err;
300
301 nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM;
302 nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
303
304 return 0;
305 }
306
nt35950_off(struct nt35950 * nt)307 static void nt35950_off(struct nt35950 *nt)
308 {
309 struct mipi_dsi_device *dsi = nt->dsi[0];
310 struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
311
312 mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
313 mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
314
315 mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
316 mipi_dsi_msleep(&dsi_ctx, 150);
317
318 nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
319 nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
320 }
321
nt35950_sharp_init_vregs(struct nt35950 * nt,struct device * dev)322 static int nt35950_sharp_init_vregs(struct nt35950 *nt, struct device *dev)
323 {
324 int ret;
325
326 nt->vregs[0].supply = "vddio";
327 nt->vregs[1].supply = "avdd";
328 nt->vregs[2].supply = "avee";
329 nt->vregs[3].supply = "dvdd";
330 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->vregs),
331 nt->vregs);
332 if (ret < 0)
333 return ret;
334
335 ret = regulator_is_supported_voltage(nt->vregs[0].consumer,
336 1750000, 1950000);
337 if (!ret)
338 return -EINVAL;
339 ret = regulator_is_supported_voltage(nt->vregs[1].consumer,
340 5200000, 5900000);
341 if (!ret)
342 return -EINVAL;
343 /* AVEE is negative: -5.90V to -5.20V */
344 ret = regulator_is_supported_voltage(nt->vregs[2].consumer,
345 5200000, 5900000);
346 if (!ret)
347 return -EINVAL;
348
349 ret = regulator_is_supported_voltage(nt->vregs[3].consumer,
350 1300000, 1400000);
351 if (!ret)
352 return -EINVAL;
353
354 return 0;
355 }
356
nt35950_prepare(struct drm_panel * panel)357 static int nt35950_prepare(struct drm_panel *panel)
358 {
359 struct nt35950 *nt = to_nt35950(panel);
360 int ret;
361
362 ret = regulator_enable(nt->vregs[0].consumer);
363 if (ret)
364 return ret;
365 usleep_range(2000, 5000);
366
367 ret = regulator_enable(nt->vregs[3].consumer);
368 if (ret)
369 goto end;
370 usleep_range(15000, 18000);
371
372 ret = regulator_enable(nt->vregs[1].consumer);
373 if (ret)
374 goto end;
375
376 ret = regulator_enable(nt->vregs[2].consumer);
377 if (ret)
378 goto end;
379 usleep_range(12000, 13000);
380
381 nt35950_reset(nt);
382
383 ret = nt35950_on(nt);
384
385 end:
386 if (ret < 0) {
387 regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);
388 return ret;
389 }
390
391 return 0;
392 }
393
nt35950_unprepare(struct drm_panel * panel)394 static int nt35950_unprepare(struct drm_panel *panel)
395 {
396 struct nt35950 *nt = to_nt35950(panel);
397
398 nt35950_off(nt);
399
400 gpiod_set_value_cansleep(nt->reset_gpio, 0);
401 regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);
402
403 return 0;
404 }
405
nt35950_get_modes(struct drm_panel * panel,struct drm_connector * connector)406 static int nt35950_get_modes(struct drm_panel *panel,
407 struct drm_connector *connector)
408 {
409 struct nt35950 *nt = to_nt35950(panel);
410 int i;
411
412 for (i = 0; i < nt->desc->num_modes; i++) {
413 struct drm_display_mode *mode;
414
415 mode = drm_mode_duplicate(connector->dev,
416 &nt->desc->mode_data[i].mode);
417 if (!mode)
418 return -ENOMEM;
419
420 drm_mode_set_name(mode);
421
422 mode->type |= DRM_MODE_TYPE_DRIVER;
423 if (nt->desc->num_modes == 1)
424 mode->type |= DRM_MODE_TYPE_PREFERRED;
425
426 drm_mode_probed_add(connector, mode);
427 }
428
429 connector->display_info.bpc = 8;
430 connector->display_info.height_mm = nt->desc->mode_data[0].mode.height_mm;
431 connector->display_info.width_mm = nt->desc->mode_data[0].mode.width_mm;
432 nt->connector = connector;
433
434 return nt->desc->num_modes;
435 }
436
437 static const struct drm_panel_funcs nt35950_panel_funcs = {
438 .prepare = nt35950_prepare,
439 .unprepare = nt35950_unprepare,
440 .get_modes = nt35950_get_modes,
441 };
442
nt35950_probe(struct mipi_dsi_device * dsi)443 static int nt35950_probe(struct mipi_dsi_device *dsi)
444 {
445 struct device *dev = &dsi->dev;
446 struct device_node *dsi_r;
447 struct mipi_dsi_host *dsi_r_host;
448 struct nt35950 *nt;
449 const struct mipi_dsi_device_info *info;
450 int i, num_dsis = 1, ret;
451
452 nt = devm_kzalloc(dev, sizeof(*nt), GFP_KERNEL);
453 if (!nt)
454 return -ENOMEM;
455
456 ret = nt35950_sharp_init_vregs(nt, dev);
457 if (ret)
458 return dev_err_probe(dev, ret, "Regulator init failure.\n");
459
460 nt->desc = of_device_get_match_data(dev);
461 if (!nt->desc)
462 return -ENODEV;
463
464 nt->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
465 if (IS_ERR(nt->reset_gpio)) {
466 return dev_err_probe(dev, PTR_ERR(nt->reset_gpio),
467 "Failed to get reset gpio\n");
468 }
469
470 /* If the panel is connected on two DSIs then DSI0 left, DSI1 right */
471 if (nt->desc->is_dual_dsi) {
472 info = &nt->desc->dsi_info;
473 dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
474 if (!dsi_r) {
475 dev_err(dev, "Cannot get secondary DSI node.\n");
476 return -ENODEV;
477 }
478 dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r);
479 of_node_put(dsi_r);
480 if (!dsi_r_host)
481 return dev_err_probe(dev, -EPROBE_DEFER, "Cannot get secondary DSI host\n");
482
483 nt->dsi[1] = mipi_dsi_device_register_full(dsi_r_host, info);
484 if (IS_ERR(nt->dsi[1])) {
485 dev_err(dev, "Cannot get secondary DSI node\n");
486 return PTR_ERR(nt->dsi[1]);
487 }
488 num_dsis++;
489 }
490
491 nt->dsi[0] = dsi;
492 mipi_dsi_set_drvdata(dsi, nt);
493
494 drm_panel_init(&nt->panel, dev, &nt35950_panel_funcs,
495 DRM_MODE_CONNECTOR_DSI);
496
497 ret = drm_panel_of_backlight(&nt->panel);
498 if (ret) {
499 if (num_dsis == 2)
500 mipi_dsi_device_unregister(nt->dsi[1]);
501
502 return dev_err_probe(dev, ret, "Failed to get backlight\n");
503 }
504
505 drm_panel_add(&nt->panel);
506
507 for (i = 0; i < num_dsis; i++) {
508 nt->dsi[i]->lanes = nt->desc->num_lanes;
509 nt->dsi[i]->format = MIPI_DSI_FMT_RGB888;
510
511 nt->dsi[i]->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
512 MIPI_DSI_MODE_LPM;
513
514 if (nt->desc->mode_data[0].is_video_mode)
515 nt->dsi[i]->mode_flags |= MIPI_DSI_MODE_VIDEO;
516
517 ret = mipi_dsi_attach(nt->dsi[i]);
518 if (ret < 0) {
519 /* If we fail to attach to either host, we're done */
520 if (num_dsis == 2)
521 mipi_dsi_device_unregister(nt->dsi[1]);
522
523 return dev_err_probe(dev, ret,
524 "Cannot attach to DSI%d host.\n", i);
525 }
526 }
527
528 /* Make sure to set RESX LOW before starting the power-on sequence */
529 gpiod_set_value_cansleep(nt->reset_gpio, 0);
530 return 0;
531 }
532
nt35950_remove(struct mipi_dsi_device * dsi)533 static void nt35950_remove(struct mipi_dsi_device *dsi)
534 {
535 struct nt35950 *nt = mipi_dsi_get_drvdata(dsi);
536 int ret;
537
538 ret = mipi_dsi_detach(nt->dsi[0]);
539 if (ret < 0)
540 dev_err(&dsi->dev,
541 "Failed to detach from DSI0 host: %d\n", ret);
542
543 if (nt->dsi[1]) {
544 ret = mipi_dsi_detach(nt->dsi[1]);
545 if (ret < 0)
546 dev_err(&dsi->dev,
547 "Failed to detach from DSI1 host: %d\n", ret);
548 mipi_dsi_device_unregister(nt->dsi[1]);
549 }
550
551 drm_panel_remove(&nt->panel);
552 }
553
554 static const struct nt35950_panel_mode sharp_ls055d1sx04_modes[] = {
555 {
556 /* 1920x1080 60Hz no compression */
557 .mode = {
558 .clock = 214537,
559 .hdisplay = 1080,
560 .hsync_start = 1080 + 400,
561 .hsync_end = 1080 + 400 + 40,
562 .htotal = 1080 + 400 + 40 + 300,
563 .vdisplay = 1920,
564 .vsync_start = 1920 + 12,
565 .vsync_end = 1920 + 12 + 2,
566 .vtotal = 1920 + 12 + 2 + 10,
567 .width_mm = 68,
568 .height_mm = 121,
569 },
570 .compression = MCS_DATA_COMPRESSION_NONE,
571 .enable_sram = true,
572 .is_video_mode = false,
573 .scaler_on = 1,
574 .scaler_mode = MCS_SCALEUP_DUPLICATE,
575 },
576 /* TODO: Add 2160x3840 60Hz when DSC is supported */
577 };
578
579 static const struct nt35950_panel_desc sharp_ls055d1sx04 = {
580 .model_name = "Sharp LS055D1SX04",
581 .dsi_info = {
582 .type = "LS055D1SX04",
583 .channel = 0,
584 .node = NULL,
585 },
586 .mode_data = sharp_ls055d1sx04_modes,
587 .num_modes = ARRAY_SIZE(sharp_ls055d1sx04_modes),
588 .is_dual_dsi = true,
589 .num_lanes = 4,
590 };
591
592 static const struct of_device_id nt35950_of_match[] = {
593 { .compatible = "sharp,ls055d1sx04", .data = &sharp_ls055d1sx04 },
594 { }
595 };
596 MODULE_DEVICE_TABLE(of, nt35950_of_match);
597
598 static struct mipi_dsi_driver nt35950_driver = {
599 .probe = nt35950_probe,
600 .remove = nt35950_remove,
601 .driver = {
602 .name = "panel-novatek-nt35950",
603 .of_match_table = nt35950_of_match,
604 },
605 };
606 module_mipi_dsi_driver(nt35950_driver);
607
608 MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>");
609 MODULE_DESCRIPTION("Novatek NT35950 DriverIC panels driver");
610 MODULE_LICENSE("GPL v2");
611