1 /* 2 * Header file for ICOM radios 3 */ 4 #include "ntp_types.h" 5 6 /* 7 * Common definitions 8 */ 9 #define P_ERMSG 0x1 /* trace bus error messages */ 10 #define P_TRACE 0x2 /* trace CI-V messges */ 11 #define RETRY 3 /* max packet retries */ 12 #define IBAUD B1200 /* autotune port speed */ 13 14 /* 15 * Radio identifier codes 16 */ 17 #define IC1271 0x24 18 #define IC1275 0x18 19 #define IC271 0x20 20 #define IC275 0x10 21 #define IC375 0x12 22 #define IC471 0x22 23 #define IC475 0x14 24 #define IC575 0x16 25 #define IC725 0x28 26 #define IC726 0x30 27 #define IC735 0x04 28 #define IC751 0x1c 29 #define IC761 0x1e 30 #define IC765 0x2c 31 #define IC775 0x46 32 #define IC781 0x26 33 #define IC970 0x2e 34 #define R7000 0x08 35 #define R71 0x1a 36 #define R7100 0x34 37 #define R72 0x32 38 #define R8500 0x4a 39 #define R9000 0x2a 40 41 /* 42 * CI-V frame codes 43 */ 44 #define PR 0xfe /* preamble */ 45 #define TX 0xe0 /* controller address */ 46 #define FI 0xfd /* end of message */ 47 #define ACK 0xfb /* controller normal reply */ 48 #define NAK 0xfa /* controller error reply */ 49 #define PAD 0xff /* transmit padding */ 50 51 /* 52 * CI-V controller commands 53 */ 54 #define V_FREQT 0x00 /* freq set (transceive) */ 55 #define V_MODET 0x01 /* set mode (transceive) */ 56 #define V_RBAND 0x02 /* read band edge */ 57 #define V_RFREQ 0x03 /* read frequency */ 58 #define V_RMODE 0x04 /* read mode */ 59 #define V_SFREQ 0x05 /* set frequency */ 60 #define V_SMODE 0x06 /* set mode */ 61 #define V_SVFO 0x07 /* select vfo */ 62 #define V_SMEM 0x08 /* select channel/bank */ 63 #define V_WRITE 0x09 /* write channel */ 64 #define V_VFOM 0x0a /* memory -> vfo */ 65 #define V_CLEAR 0x0b /* clear channel */ 66 #define V_ROFFS 0x0c /* read tx offset */ 67 #define V_SOFFS 0x0d /* write tx offset */ 68 #define V_SCAN 0x0e /* scan control */ 69 #define V_SPLIT 0x0f /* split control */ 70 #define V_DIAL 0x10 /* set dial tuning step */ 71 #define V_ATTEN 0x11 /* set attenuator */ 72 #define V_SANT 0x12 /* select antenna */ 73 #define V_ANNC 0x13 /* announce control */ 74 #define V_WRCTL 0x14 /* write controls */ 75 #define V_RDCTL 0x15 /* read controls */ 76 #define V_TOGL 0x16 /* set switches */ 77 #define V_ASCII 0x17 /* send CW message */ 78 #define V_POWER 0x18 /* power control */ 79 #define V_RDID 0x19 /* read model ID */ 80 #define V_SETW 0x1a /* read/write channel/bank data */ 81 #define V_CTRL 0x7f /* miscellaneous control */ 82 83 /* 84 * Function prototypes 85 */ 86 int icom_init (const char *, int, int); 87 int icom_freq (int, int, double); 88